Sl. No Description Units Qty Rate Amount
A CIVIL WORKS
EARTH WORKS
1
Clearing grass and removal of the rubbish upto a
distance of 50 m outside the periphery of the area
cleared.100 m
2 5000.00
2
Earth work in excavation by mechanical means
(Hydraulic Excavator )/ manual means in
foundation trenches or drains (not exceeding 1.5
m in width or 10 sum on plan) including dressing
of sides and ramming of bottoms, lift upto 1.5 m,
including getting out the excavated soil and
disposal of surplus excavated soil as directed,
within a lead of 50 m.
a All kinds of soil. Cum 200.00
3
Filling available excavated earth (excluding rock)
in trenches, plinth, sides of foundations etc. in
layers not exceeding 20cm in depth, Cum 200.00
HINDUSTAN PREFAB LIMITED
THYCAUD, TRIVANDRUM
Name of work : Proposed Interim Building for Malayalam University at Govt. College
campus, Tirur, Malappuram District
BOQ
3 layers not exceeding 20cm in depth,
consolidating each deposited layer by ramming
and watering, lead up to 50 m and lift upto 1.5 m.
Cum 200.00
4Supplying chemical emulsion in sealed
containers including delivery as specified.
aChlorpyriphos/ Lindane emulsifiable concentrate
of 20%Litre 510.00
5
Diluting and injecting chemical emulsion for
POST-CONSTRUCTIONAL anti-termite
treatment (excluding the cost of chemical
emulsion) :
a
Along the external wall below concrete or
masonry apron using chemical emulsion @ 2.25
litres per linear metre including drilling and
plugging holes etc.
(i)With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration.RM 150.00
b
Treatment of soil under existing floors using
chemical emulsion @ one litre per hole, 300 mm
apart including drilling 12 mm diameter holes
and plugging with cement mortar 1 :2 (1 cement :
2 Coarse sand) to match the existing floor :
(ii)With Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration.Sqm 890.00
Malayalam University Page 1 of 26 Estimate
Sl. No Description Units Qty Rate Amount
CONCRETE WORKS
6
Providing and laying in position cement concrete
of specified grade excluding the cost of centring
and shuttering - All work upto plinth level :
a1:4:8 (1 Cement : 4 coarse sand : 8 graded stone
aggregate 40 mm nominal size).Cum 140.00
REINFORCED CEMENT CONCRETE
7
Providing and laying in position specified grade
of reinforced cement concrete excluding the cost
of centring, shuttering, finishing and
reinforcement - All work upto plinth level :
a1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded
stone aggregate 20mm nominal size )Cum 24.00
8
Reinforced cement concrete work in walls (any
thickness), including attached pilasters,
buttresses, plinth and string courses, fillets,
columns, pillars, piers, abutments, post and struts
etc., upto floor five level excluding cost of
centering, shuttering, finishing and
reinforcement.
a1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded
stone aggregate 20mm nominal size )Cum 39.00
stone aggregate 20mm nominal size )
FORM WORK
9Centering and shuttering including strutting,
propping etc. and removal of form for :
aLintels, beams, plinth beams, girders, bressumers
and cantilevers.Sqm 650.00
10
Steel reinforcement for RCC work including
straightening, cutting,bending,placing in position
and binding all complete upto Plinth level
Thermo-Mechanically Treated bars Kg 960.00
11
Steel reinforcement for RCC work including
straightening, cutting,bending,placing in position
and binding all complete above Plinth level
Thermo-Mechanically Treated bars Kg 2400.00
12
Random rubble masonry with hard stone in
foundation and plinth including levelling up with
cement concrete 1:6:12 (1 cement : 6 coarse sand
: 12 graded stone aggregate 20mm nominal size)
at plinth level with :
a Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 250.00
Malayalam University Page 2 of 26 Estimate
Sl. No Description Units Qty Rate Amount
MARBLE & GRANITE WORK
13
Providing and fixing 18mm thick gang saw cut
mirror polished (premoulded and prepolished)
machine cut for kitchen platforms, vanity
counters ,window sills , facias and similar
locations of required size of approved shade,
colour and texture laid over 20mm thick base
cement mortar 1:4 (1 cement : 4 coarse sand)
with joints treated with white cement, mixed with
matching pigment, epoxy touch ups, including
rubbing, curing moulding and polishing to edge
to give high gloss finish etc. complete at all
levels.a Granite of any colour and shade
(i) Area of slab over 0.50 sum. Sqm 5.00
14
Providing edge moulding to 18mm thick marble
stone counters, Vanities etc. including machine
polishing to edge to give high gloss finish etc.
complete as per design approved by Engineer-in-
Charge.a Granite work. RM 8.00
WOOD & PVC WORKS
Providing wood work in frames of doors,
15
Providing wood work in frames of doors,
windows, clerestory windows and other frames,
wrought framed and fixed in position :
a Second class teak wood Cum 0.12
b Sal wood Cum 0.70
16
Providing and fixing panelled or panelled and
glazed shutters for doors, windows and clerestory
windows including ISI marked black enamelled
M.S pressed butt hinges bright finished of
required size with necessary screws excluding,
panelling which will be paid for separately.all
complete as per direction Engineer -in -charge
a Second class teak wood
b 35 mm thick shutters Sqm 5.00
17
Providing and fixing ISI marked flush door
shutters conforming to IS: 2202 (Part I)
decorative type, core of block board construction
with frame of 1st class hard wood and well
matched teak 3 ply veneering with vertical grains
or cross bands and face veneers on both faces of
shutters.
a35 mm thick including ISI marked Stainless Steel
butt hinges with necessary screws.Sqm 38.00
Malayalam University Page 3 of 26 Estimate
Sl. No Description Units Qty Rate Amount
18
Providing and fixing factory made P.V.C. door
frame of size 50x47mm with a wall thickness of
5mm, made out of extruded 5mm rigid PVC
foam sheet mitred at corners and joined with 2
Nos. of 150mm long brackets of 15x15mm M.S.
square tube, the vertical door profiles to be
reinforced with 19x19mm M.S. square tube of 19
gauge, EPDM rubber gasket weather seal to be
provided through out the frame. The door frame
to be fixed to the wall using M.S. screws of
65/100mm size complete as per manufacturers
specification and direction of Engineer-in-
Charge.
RM 60.00
Providing and fixing factory made panel PVC
door shutter consisting of frame made out of
M.S. tubes of 19 gauge thickness and size of
19mm x 19mm for styles and 15x15mm for top
& bottom rails. M.S. frame shall have a coat of
steel primers of approved make and manufacture
. M.S. frame covered with 5mm thick heat
moulded PVC 'C' channel of size 30mm
thickness, 70mm width out of which 50mm shall
be flat and 20mm shall be tapered in 45degree
19
be flat and 20mm shall be tapered in 45degree
angle on either side forming styles; and 5mm
thick, 95mm wide PVC sheet out of which 75mm
shall be flat and 20mm shall be tapered in 45
degree on the inner side to form top and bottom
rail and 115mm wide PVC sheet out of which
75mm shall be flat and 20mm shall be tapered on
both sides to form lock rail. Top, bottom and lock
rails shall be provided either side of the panel.
10mm (5mm x 2 ) thick, 20mm wide cross PVC
sheet be provided as gap insert for top rail &
bottom rail. paneling of 5mm thick both side
PVC sheet to be fitted in the M.S. frame welded/
sealed to the styles & rails with 7mm
(5mm+2mm) thick x 15mm wide PVC sheet
beading on inner side, and joined together with
solvent cement adhesive. An additional 5mm a 30mm thick plain PVC door shutters Sqm 19.00
20
Providing and fixing IS : 12817 marked stainless
steel butt hinges (heavy weight) with stainless
steel screws etc. complete :
a 125x64x2.50 mm Each 72.00
Malayalam University Page 4 of 26 Estimate
Sl. No Description Units Qty Rate Amount
21
Providing and fixing aluminium tower bolts ISI
marked anodised (anodic coating not less than
grade AC 10 as per IS : 1868 ) transparent or
dyed to required colour or shade with necessary
screws etc. complete :
a 300x10 mm Each 18.00
b 200x10 mm Each 18.00
22
Providing and fixing aluminium handles ISI
marked anodised (anodic coating not less than
grade AC 10 as per IS : 1868) transparent or dyed
to required colour or shade with necessary screws
etc. complete :
a 125 mm Each 18.00
23
Providing and fixing aluminium hanging floor
door stopper ISI marked anodised (anodic
coating not less than grade AC 10 as per IS :
1868) transparent or dyed to required colour and
shade with necessary screws etc. complete.
a Twin rubber stopper Each 18.00
24Providing and fixing bright finished brass butt
hinges with necessary screws etc. complete :24 hinges with necessary screws etc. complete :
a 125x85x5.5 mm (heavy type) Each 8.00
25
Providing and fixing bright finished brass tower
bolts (barrel type) with necessary screws etc.
complete :a 250x10 mm Each 2.00
b 200x10 mm Each 2.00
26Providing and fixing bright finished brass
handles with screws etc. complete :
a 125 mm Each 2.00
27
Providing and fixing bright finished brass
hanging type floor door stopper with necessary
screws, etc. complete.Each 2.00
28
Providing and fixing IS : 3564 marked
aluminium extruded section body tubular type
universal hydraulic door closer with double speed
adjustment with necessary accessories and screws
etc. complete.
Each 1.00
STEEL WORK
Malayalam University Page 5 of 26 Estimate
Sl. No Description Units Qty Rate Amount
29
Steel work in built up tubular ( round, square or
rectangular hollow tubes etc.) trusses etc.,
including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer
including welding and bolted with special shaped
washers etc., complete.
a Hot finished welded type tubes Kg 20000.00
FLOORING
30
Chequerred precast cement concrete tiles 22 mm
thick in footpath & courtyard jointed with neat
cement slurry mixed with pigment to match the
shade of tiles including rubbing and cleaning etc.
complete on 20 mm thick bed of cement mortar
1:4 (1 cement: 4 coarse sand).
aMedium shade using 50% white cement 50%
Grey cement.Sqm 360.00
31
Providing and fixing Ist quality ceramic glazed
wall tiles conforming to IS : 15622 (thickness to
be specified by the manufacture ) of approved
make in all colours, shades except burgundy,
bottle green, black of any size as approved by
Engineer-in-Charge in skirting, risers of steps and Sqm 170.0031 Engineer-in-Charge in skirting, risers of steps and
dados over 12 mm thick bed of cement Mortar
1:3 (1 cement : 3 coarse sand) and jointing with
grey cement slurry @ 3.3kg per sum including
pointing in white cement mixed with pigment of
matching shade complete.
Sqm 170.00
32
Providing and laying Ceramic glazed floor tiles
300x300 mm (thickness to be specified by the
manufacturer) of 1st quality conforming to IS :
15622 of approved make in colours such as
White, Ivory, Grey, Fume Red Brown, laid on 20
mm thick Cement Mortar 1:4 (1 Cement : 4
Coarse sand) including pointing the joints with
white cement and matching pigment etc.,
complete.
Sqm 55.00
33
Providing and laying polished vitrified floor tiles
in different sizes (thickness to be specified by the
manufacturer) with water absorption's less than
0.08% and conforming to IS : 15622 of approved
make in all colours and shades, laid on 20mm
thick cement mortar 1:4 (1 cement : 4 coarse
sand) including grouting the joints with white
cement and matching pigments etc., complete.
a Size of Tile 600x600 cm Sqm 850.00
Malayalam University Page 6 of 26 Estimate
Sl. No Description Units Qty Rate Amount
FINISHING
34 12 mm cement plaster of mix :
a 1:6 (1 cement : 6 fine sand) Sqm 1900.00
35 20 mm cement plaster of mix :
a 1:6 (1 cement : 6 coarse sand) Sqm 600.00
INTERIOR FINISHING
36 White washing with lime to give an even shade:
a New work ( One coat) Sqm 2500.00
37
Distempering with oil bound washable distemper
of approved brand and manufacture to give an
even shade
aNew work (two or more coats) over and
including priming coat with cement primer.Sqm 1900.00
EXTERIOR FINISHING
38
Finishing walls with Premium Acrylic Smooth
exterior paint with Silicone additives of required
shade
a
New work (Two or more coats applied @ 1.43
ltr/ 10 sum. over and including base coat of water
proofing cement paint applied @ 2.20 kg/ 10
sum).
Sqm 600.00
sum).
39Painting with synthetic enamel paint of approved
brand and manufacture to give an even shade :
a Two or more coats on new work Sqm 105.00
40Painting with Aluminium paint of approved
brand and manufacture to given even shade.
a Two or more coats on new work Sqm 1450.00
41Polishing on wood work with ready mixed wax
polish of approved brand and manufacture :
a New work Sqm 13.00
ALUMINIUM WORK
Malayalam University Page 7 of 26 Estimate
Sl. No Description Units Qty Rate Amount
42
Providing and fixing aluminium work for doors,
windows, ventilators and partitions with extruded
built up standard tubular sections/ appropriate Z
sections and other sections of approved make
conforming to IS: 733 and IS : 1285, fixed with
rawl plugs and screws or with fixing clips, or
with expansion hold fasteners including
necessary filling up of gaps at junctions, at top,
bottom and sides with required PVC/neoprene
felt etc. Aluminium sections shall be smooth, rust
free, straight, mitred and jointed mechanically
wherever required including cleat angle,
Aluminium snap beading for glazing / panelling,
C.P. brass / stainless steel screws, all complete as
per architectural drawings and the directions of
Engineer-in-charge. (Glazing and panelling to be
paid for separately) :a For fixed portion.
(i)
Anodised aluminium (anodised transparent or
dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)
Kg 774.00
43
For shutters of doors, windows & ventilators
including providing and fixing hinges/ pivots and
making provision for fixing of fittings wherever
required including the cost of PVC / neoprene43
required including the cost of PVC / neoprene
gasket required (Fittings shall be paid for
separately).
a
Anodised aluminium (anodised transparent or
dyed to required shade according to IS: 1868,
Minimum anodic coating of grade AC 15)Kg 570.00
44
Providing and fixing glazing in aluminium door,
window, ventilator shutters and partitions etc.
with PVC/ neoprene gasket etc. complete as per
the architectural drawings and the directions of
engineer-in-charge . (Cost of aluminium snap
beading shall be paid in basic item) :
a With float glass panes of 4.0 mm thickness Sqm 105.00
NON SCHEDULE ITEMS
45Supplying and filling Available excavated earth
from outside , cosolidating etc completeCum 400.00
46 Aluminium grills for windows of Standard design Sqm 105.00
47
Solid block masonry in superstructure above
plinth level upto floor five level using concrete
block of size 40 x 20 x 15 cm / 40 x 20 x 10 cm
including cost and conveyance of all materials
and labour charges etc.complete.
Malayalam University Page 8 of 26 Estimate
Sl. No Description Units Qty Rate Amount
a In Cement mortar 1:6 Cum 210.00
48
Providing and fixing at all height false ceiling of
3mm P.V.C rigid form sheet manufactured by
M/s Rajasree or equivalent including providing
and fixing of frame work made of special
sections power pressed from MS sheet and
galvanised in accordence with zinc coating 350
as per IS 277 and consisting of angle cleats of
size 25mm wide x 1.6mm thick with flanges of
22mm and 37mm at 600mm centre to centre one
flange fixed to the ceiling with dash fastner
12.5mm dia x 40mm long with 6mm dia bolts to
the angle hanger of 25 x 25 x 0.55mm of required
length, and other end of angle hanger being fixed
with nut and bolts to GI channels 45 x 15 x
0.9mm running at the rate of 600mm centre to
centre to reach the ceiling section 0.5mm thick
button wedge of 80mm with tapered shall be
fixed in a directio perpendicular to GI channel
with connecting clips made out of 2.6mm dia x
330mm long GI wire at every junction including
fixing the PVC rigid form sheet with coiling
section and perimetre channels 0.5mm thick
27mm high having& rails with 7mm
Sqm 890.00
27mm high having& rails with 7mm
(5mm+2mm) thick x 15mm wide PVC sheet
beading on inner side, and joined together with
solvent cement adhesive. An additional 5mm
49
Providing and fixing Structural frame work with
65mm GI pipe verticaly and horizontaly and top
with PVC sheet 18mm thick to seat the PVC
water tank (3000 litre capacity)with concrete
pedestal for bottom support( PVC tank and base
Concrete shall be paid separatly)
Kg 500.00
50Providing 100mm dia bore well with casing pipe,
boaring,casing, testing etc completeMetre 80.00
51
Supplying and fixing 2HP Submersible pump set
with pipes and all other plumbing & electrical
accessories etc complete
Each 1.00
52 Brass Aldrop 300mm for entrance door Each 2.00
53 Stainless steel Aldrop 300mm for internal doors Each 18.00
54Supplying and providing Precast RCC Decorative
Pillar 230mm dia and 2m height.Each 16.00
55Providing and fixing Precast concrete Eve board
150mm depth and 25mm thickRM 200.00
Malayalam University Page 9 of 26 Estimate
Sl. No Description Units Qty Rate Amount
56Providing and fixing precast concrete Ornamental
border 50mm RM 15.00
57
Providing Roofing with Galvanium sheet
0.50mm thick, 550Mpa, AEZ150gm/Sqm
including all fittings and fixtures , scaffolding
etc. complete
Sqm 1200.00
58
Providing Ridge for the roofing using Galvanium
sheet 0.50mm thick including fixtures, fittings ,
scaffolding etc. complete.RM 170.00
TOTAL CIVIL WORKS
B SANITARY AND PLUMBING WORKS
SUB HEAD VIII: SANITARY AND CP
FITTINGS
59
Providing and Fixing White Vitreous China
Pedestal type Water Closet (European Type) with
seat and lid 10 litre low level White vitreous
China Flushing Cistern & C.P.flush bend with
fittings & C.I.Brackets, 40mm flush bend,
Overflow arrangement with specials of standard
makes and mosquito proof coupling of approvedmakes and mosquito proof coupling of approved
municipal design complete including painting of
fittings and brackets, cutting and making good
the walls and floors wherever required with WC
Pan with ISI marked Black Solid plastic seat and
lid
aW.C. Pan with ISI marked Black Solid plastic
seat and lid Each 6.00
60
Providing and fixing water closet squatting pan
(Indian type W.C. pan ) with 100mm sand cast
Iron P or S trap, 10 litre low level white P.V.C.
flushing cistern including flush pipe with
manually controlled device (handle lever)
conforming to IS : 7231, with all fittings and
fixtures complete including cutting and making a
White Vitreous china Orissa pattern W.C. pan of
size 580x440mm with integral type foot rests.Each 6.00
61
Providing and fixing Wash Basin with
C.I.Brackets, 15mm C.P.Brass Pillar Taps, 32mm
C.P.Brass Waste of standard pattern, including
painting of fittings and Brackets, cutting and
making good the walls wherever required
aWhite Vitreous china wash basin size: 630 x 450
mm with a single 15 mm CP brass Pillar Tap Each 11.00
Malayalam University Page 10 of 26 Estimate
Sl. No Description Units Qty Rate Amount
62
Providing and fixing Mirror of Superior Glass of
approved quality and of required shape and size
with plastic moulded frame of approved make
and shade with 6mm thick hard board backing:
a Rectangular shape 453 x 357mm Each 8.00
63
Providing and fixing PTMT Waste Coupling for
Wash Basin and Sink, of approved quality and
colour
aWaste Coupling 38mm of 83mm length and
77mm breadth, weighing not less than 60gms.Each 24.00
64Providing and fixing PTMT Bottle Trap for
Wash Basin and Sink
a
Bottle Trap 38mm single piece moulded with
height of 270mm, effective length of tail pipe
260mm from the centre of the Waste Coupling
77mm breadth with 25mm minimum water seal,
weighing not less than 263gms.
Each 12.00
65
Providing and fixing PTMT Towel rail complete
with brackets fix to wooden slits with cp brass
screws with concealed fittings arrangement of
approved quality and colour approved quality and colour
a
450mm long towel rail with total length of
495mm, 78mm wide and effective height of
88mm, weighing not less than 170gms.
Each 6.00
SUB HEAD IX WATER SUPPLY
COLD WATER SUPPLY PIPING
66
Providing and fixing 3 layer PP-R (Poly
propylane Random copolymer ) pipes SDR 7.4
UV stabilized
a 20mm Dia PP-R, PN16 Pipe for Water supply
Supply, installation & commissioning Metre 120.00
b 25mm Dia PP-R, PN16 Pipe for Water supply
Supply, installation & commissioning Metre 60.00
Labour / Installation / Erection:
c 32mm Dia PP-R, PN16 Pipe for Water supply
Supply, installation & commissioning Metre 50.00
Labour / Installation / Erection:
d 40mm Dia PP-R, PN16 Pipe for Water supply
Supply, installation & commissioning Metre 50.00
Labour / Installation / Erection:
e 50mm Dia PP-R, PN16 Pipe for Water supply
Supply, installation & commissioning Metre 60.00
Labour / Installation / Erection:
Malayalam University Page 11 of 26 Estimate
Sl. No Description Units Qty Rate Amount
67
Supply, Leading to site and Installing at position
PPR Ball Valves PN20 Wafer type using Male
Threaded Adapters (MTA) necessary PVC
flanges, gaskets, nuts and bolts complete as
required
a 50mm Dia
Supply, installation & commissioning Each 1.00
Labour / Installation / Erection:
68
Providing and placing on terrace (at all floor
levels) polyethylene water storage tank ISI :
12701 marked with cover and suitable locking
arrangement and making necessary holes for
inlet, outlet and overflow pipes but without
fittings and the base support for tank
Per litre 3000.00
69
Providing and fixing CP brass bib cock of
approved quality conforming to IS standards and
weighing not less than 690 gms,
a 15 mm nominal bore Each 12.00
70
Providing and fixing CP brass long body bib
cock of approved quality conforming to IS
standards and weighing not less than 690 gms,
a 15mm nominal bore Each 4.00
71
Providing and fixing CP Brass Angle valve for
basin mixer and gyser points of approved quality
conforming to IS:8931,
a 15mm nominal bore Each 24.00
SOIL, WASTE AND RAIN WATER PIPING
72Providing and fixing PTMT grating of approved
quality and colour
a Rectanular type with openable circular lid
(i)150mm nominal size square 100mm diameter of
the inner hinged round gratingEach 20.00
73
Providing and fixing PTMT soap dish holder
having length of 138 mm breadth 102 mm heigh
of 75 mm with concealed fittings arrangements
weighing not less than 106 gms
Each 6.00
DRAINAGE
EXTERNAL TRENCHES, MANHOLES &
TRAPS
Malayalam University Page 12 of 26 Estimate
Sl. No Description Units Qty Rate Amount
74
Construction of Brick Masonry Manhole in
cement mortor 1:4 (1 cement :4 coarse sand
)R.C.C, top slab with 1:2:4 mix (1 cement : 2
coarse sand :4 graded stone aggregate 20mm
nominal size),foundation concrete 1:4:8 mix(1
cement :4 coarse sand : 8 graded stone aggregate
40mm nominal size )inside plastering 12mm
thick with cement mortor 1:3 (1 cement :3 coarse
sand) finished with floating coat of neat cement
and making channels in cement concrete 1:2:4 (1
cement :2 coarse sand :4 graded stone aggregate
20mm nominal size) finished with a floating coat
of neat cement complete as per standard design:
a
Inside size 90x80 cm and 45 cm deep including
C.I. cover with frame (light duty ) 455x610 mm
internal dimensions total weight of cover and
frame to be not less than 38 Kg ( weight of cover
23Kg and weight of frame 15Kg):
(i)With common burnt clayF.P.S.(non modular)
bricks with class designation 7.5Each 6.00
75
Inside size 120x90 cm and 90 cm deep
incluuding C.I. cover with frame ( medium duty)
500 mm internal diameter, total weight of cover75 500 mm internal diameter, total weight of cover
and frame to be not less than 116 Kg (weight of
cover 58 Kg and weight of frame 58Kg)
aWith common burnt clayF.P.S.(non modular)
bricks with class designation 7.5Each 2.00
76
Supplying and fixing C.I cover 300x300mm
without frame for gully trap ( standard pattern)
the weight of cover to be not less than 4.5 Kg.
Each 8.00
a
Making soak pit 2.5 m diameter 3.0 metre deep
with 45 x 45 cm dry brick honey comb shaft with
bricks of class designation 75 and S.W. drain
pipe 100 mm diameter, 1.8 m long complete as
per standard design.
(i)With common burnt clayF.P.S.(non modular)
bricks with class designation 7.5Each 2.00
NON SCHEDULE ITEM
77
Providing, Fixing, Testing and commissioning at
site ablution Health Spray Faucet, C.P.Flexible
Hose 750mm long nozzle tube, tube holder
etc.complete in all respects
Each 6.00
Malayalam University Page 13 of 26 Estimate
Sl. No Description Units Qty Rate Amount
78
Supply, Installation, testing & commissioning of
Supreme PVC pasted pipe 6kg using Solvent
Cement ISI Marked ] with Heavy duty ISI
Marked PVC fittings, Tees, Elbows, Bends, 'Y's
etc. Adapters, Air vents, Clamping with GI
UClamps as required for firmly install
a 50mm OD 6KG/Sq.cm internal Waste Piping
Supply, installation & commissioning Metre 50.00
Labour / Installation / Erection:
b 75mm OD 6KG/Sq.cm internal Waste Piping
Supply, installation & commissioning Metre 50.00
Labour / Installation / Erection:
c 110mm OD 6KG/Sq.cm internal Soil Piping
Supply, installation & commissioning Metre 60.00
Labour / Installation / Erection:
d110mm OD 6KG/Sq.cm External Soil & Waste
Piping
Supply, installation & commissioning Metre 60.00
Labour / Installation / Erection:
e160mm OD 6KG/Sq.cm External Soil & Waste
Piping
Supply, installation & commissioning Metre 80.00
Labour / Installation / Erection:
f 75mm OD 6KG/Sq.cm internal Vent Piping
Supply, installation & commissioning Metre 12.00Supply, installation & commissioning Metre 12.00
Labour / Installation / Erection:
79Multi Inlet 110MM X 63MM X 50MM Diameter
150MM Depth.
Supply, installation & commissioning Each 18.00
Labour / Installation / Erection:
80
Supplying and fixing Precast RCC septic tank
with soak pit including the cost of earthwork
excavation, filling, testing and commissioning
etc.a 80 usage capacity Each 2.00
TOTAL SANITARY & PLUMBING WORKS
C ELECTRICAL WORK
Wiring
81
Point wiring in P.V.C conduit, with modular
type switch: Wiring for light points/ fan point/
exhaust fan point/ call bell point with 1.5sq.mm
FR P.V.C insulated copper conductor single core
cable in surface /recessed P.V.C conduit with
modular switch, modular plate, suitable G.I box
and earthing the point with 1.5 sq mm FR PVC
insulated copper conductor single core cable etc.
as required.
a Group C Point 270.00
Malayalam University Page 14 of 26 Estimate
Sl. No Description Units Qty Rate Amount
82
Twin Control point wiring in P.V.C conduit,
with modular type switch: Twin control point
wiring in PVC condult , with modular type
switch Wiring for twin control light points with
1.5 sq mm FR PVC insulated copper conductor
single core cable in surface/recessed PVC
condult 2 way modular switch,modular plate.
Suitable G.I box and earthing the point with 1.5
sq mm FR PVC insulated copper conductor
single core cable etc.
Point 1.00
83
Wiring in existing PVC conduit: Supply and
drawing following size of FR PVC insulated
copper conductor, single core cable in the
existing surface/ recessed PVC conduit as
required.
a 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire Metre 200.00
b 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire Metre 1200.00
c 2 x 4 sq mm + 1 x 4 sq mm earth wire Metre 250.00
d 2 x 6 sq mm + 1 x 6 sq mm earth wire Metre 50.00
e 4 x 4 sq mm + 2 x 4 sq. mm earth wire Metre 20.00e 4 x 4 sq mm + 2 x 4 sq. mm earth wire Metre 20.00
84
Telephone wiring in existing conduit;
Supply and laying 2 pair, 0.5 sq.mm FR PVC
insulated copper conductor, unarmoured
telephone cable in the existing surface/ recessed
steel/ PVC conduit as required.
Metre 220.00
85
TV Cable in existing conduit; Supply and
drawing co-axial TV cable RG-6 grade, 0.7 mm
solid copper conductor PE insulated, shielded
with fine tinned copper braid and protected with
PVC sheath in the existing surface/ recessed
steel/ PVC conduit as required.
Metre 50.00
86
S/F PVC Conduit: Supplying and fixing of
PVC conduit with accessories in surface/ recess
including cutting the wall and making good the
same in case of recessed conduit as required.
a 20 mm Metre 1000.00
b 25mm Metre 200.00
Switches & accessories
Malayalam University Page 15 of 26 Estimate
Sl. No Description Units Qty Rate Amount
87
S/F modular type switch/ socket : Supplying
and fixing following modular switch/socket on
the existing modular plate & switch box
including connections but excluding modular
plate etc as required.
a 3 pin 5 / 6 amps socket outlet Each 5.00
b Telephone socket outlet Each 8.00
c TV antenna Socket outlet Each 2.00
88
S/F modular type electronic fan regulator :
Supplying and fixing stepped type (5 step)
electronic fan regulator on the existing modular
plate and switch box excluding modular plate but
including connectors etc as required.
Each 55.00
89
S/F modular type blanking plates : Supplying
and fixing modular blanking plate on the existing
modular plate & switch box excluding modular
plate as required.
Each 30.00
90
S/F modular boxes, base & cover plate :
Supplying and fixing following size/ modules, GI90 box along with modular base cover plate for
modular switches in recess etc as required.
a 1 or 2 module (75mmx75mm) Each 45.00
91
S/F light plug point with modular type
accessories: Supplying and fixing suitable
size G.I box with modular plate and cover in
front on surface or in recess, including providing
and fixing 3 pin 5/6 amps modular socket outlet
and 5/6 amps modular switch, connection,
painting, testing etc. as required.
Each 30.00
92
S/F Power plug point with modular type
accessories: Supplying and fixing suitable
size G.I box modular plate and cover in front or
on surface or in recess,including providing and
fixing 6 pin 15/16& 5/6 amps modular socket
outlet and 15/16 amps modular
switch,connection,painting etc.as required.
Each 7.00
93
S/F ceiling rose: Supplying and fixing 3 pin ,
5 amps ceiling rose on the existing junction box/
wooden block including connection etc as
required.
Each 20.00
Malayalam University Page 16 of 26 Estimate
Sl. No Description Units Qty Rate Amount
94
S/F Decorative Brass holder: Supplying and
fixing brass angle batten holder with decorative
UPVC covering with copper links on the existing
junction box/ wooden block including
connection, testing etc as required.
Each 12.00
95
Erection of wall bracket/ ceiling fittings:
Erection, testing and commissioning of wall
bracket/ ceiling fittings of all size and shapes
containing upto two GLS lamps per fittings,
complete with all accessories etc. as required.
Each 8.00
96
S/F call bell/ buzzer: Supplying and fixing
call bell/ buzzer suitable for DC/ AC single
phase, 230 volts, complete as required.Each
2.00
97
ITC fluorescent fitting directly on Celing :
Installation testing and commissioning of pre
wired, fluorescent fitting/ compact fluorescent
fitting of all types, complete with all accessories
and tube etc. directly on ceilling/ wall, including
connection with 0.5 sq.mm PVC insulated, PVC
sheathed three core flexible cu cable, earthing,
testing etc. as required.
Each 145.00
98
ITC fluorescent fitting with down rods :
Installation testing and commissioning of pre
wired, fluorescent fitting/ compact fluorescent
fitting of all types, complete with all accessories
and tube etc, including supplying and fixing ball
and socket arrangements, 2 no.down rods of
20mm dia x 1.6mm thick steel conduit upto 30
cm length, painting and wiring the down rods and
connection with 1.5 sq.mm FR PVC insulated,
copper conductor, single core cable/ 0.5 sq.mm
PVC insulated, PVC sheathed three core flexible
cu cable, earthing, testing etc. as required.
Each 2.00
99
S/F Extra down rods for FTL fittings:
Providing and fixing extra conduit down rod of
20mm dia, 2 x 10 cm length wiring with 1.5
sq.mm FR PVC insulated, copper conductor,
single core cable/ 0.5 sq.mm PVC insulated,
PVC sheathed three core flexible cu cable,
including painting etc. as required. (Note : More
than 5cm length shall be rounded to the nearest
10cm and 5 cm or less shall be ignored).
Each 2.00
Malayalam University Page 17 of 26 Estimate
Sl. No Description Units Qty Rate Amount
100
ITC ceiling fan : Installation, testing and
commissioning of ceilling fan, including wiring
the down rods of standard length (up to 30 cm)
with 1.5 sq mm FR PVC insulated, copper
conductor single core cable/ 0.5 sq.mm PVC
insulated, PVC sheathed three core flexible cu
cable, etc. as required.
Each 55.00
101
S/F Extra down rod for ceiling fan: Supplying
and fixing extra down rod of 10 cm length G.I.
Pipe 20 mm dia, heavy gauge including painting
etc. as required. (Note :More than 5 cm length
shall be rounded to the nearest 10 cm and 5 cm or
less shall be ignored).
Each 2.00
102
ITC exhaust fan up to 450 mm sweep :
Installation of exhaust fan up to 450 mm sweep
in the existing opening, including, making the
hole to suit the size of the above fan, making
good the damage, connection, testing ,
commissioning etc. as required.
Each 10.00
MCB DISTRIBUTION BOARD
S/F Horizontal TPN Prewired MCB DB :
Supplying and fixing following way, three pole and
103
Supplying and fixing following way, three pole and
neutral sheet steel prewired distribution board, 415
volts on surface /recessed complete with tinned
copper busbar, neutral link, earth bar, dinbar,
detachable gland plate, inter connections,
phosphatized and powder painted including earthing
etc as required (but with out MCB/RCCB/Isolator)
a 6 Way (4+18) Double door, horizontal type Each 4.00
104
S/F Vertical TPN MCB DB : Supplying and fixing
following way, three pole and neutral sheet steel
vertical type distribution board, 415 volts on surface
/recessed complete with tinned copper busbar, neutral
link, earth bar, dinbar, detachable gland plate, inter
connections, phosphatized and powder painted
including earthing etc as required (but with out
MCB/RCCB/Isolator)
a 8 Way Double door Each 1.00
Malayalam University Page 18 of 26 Estimate
Sl. No Description Units Qty Rate Amount
105
S/F Vertical TPN prewired MCCB DB :
Supplying and fixing following way, three pole and
neutral sheet steel, dust protected, vertical type
distribution board with 200amps busbar, 415 volts on
surface /recessed complete with tinned copper busbar,
neutral link, earth bar, dinbar, detachable gland plate,
inter connections, phosphatized and powder painted
including earthing etc as required (but with out
MCB/RCCB/Isolator)
a 6 Way Double door Each 1.00
106
S/F 'C' Series, MCB : Supplying and fixing 6
amps to 32 amps rating 240/ 415 volts C series
miniature circuit breaker suitable for lighting and
other loads of the following poles in the existing
MCB DB complete with connections testing and
commissioning etc as required.
a Single pole Each 93.00
b Triple pole Each 6.00
c Triple pole and neutral Each 7.00
107
S/F MCB Blanking plate : Supplying and fixing
single pole MCB blanking plate in the existing MCB
DB etc as required.
Each 10.00
108
S/F 4P MCB Isolator : Supplying and fixing the
following rating 4 pole, 415 volts Isolator in the
existing MCB DB complete with connections testing
and commissioning etc as required.
a 40 amps, 4 pole Each 1.00
109
S/F TPN RCCB : Supplying and fixing the
following rating, 415 volts triple pole & neutral
Recidual Current Circuit Breaker (RCCB) having
sensivity current capacity of 100mA in the existing
MCB DB complete with connections testing and
commissioning etc as required.
a 40 amps, 4 pole Each 4.00
110
S/F TPN MCCB : Supplying and fixing the
following rating, 415 volts triple pole & neutral
Moulded Case Circuit Breaker (MCCB) having
breaking capacity of 16kA in the existing MCB DB
complete with connections testing and commissioning
etc as required.
a 100 amps, 4 pole, 16 kA, 0 - 0.8 ln Each 1.00
Malayalam University Page 19 of 26 Estimate
Sl. No Description Units Qty Rate Amount
111
S/F 20 A SPN MCB industrial socket outlet :
Supplying and fixing 20 amps, 240 volts, SPN
industrial type, socket outlet with 2 pole and
earth, metal enclosed plug top along with 20
amps C series SP MCB in sheet steel enclosure
on surface or in recess, with chained metal cover
for the socket out let and complete with
connection, testing and commissioning etc. as
required.
Each 5.00
Earthing
112
Copper earth plate electrode :
Earthing with Copper earth plate of size 600mm
X 600mm X 3mm thick including accessories,
and providing masonary enclosure with cover
plate having locking arrangement and watering
pipe, with charcoal or coke and salt etc. as
required.
Set 2.00
113
GI Pipe Earthing :
Earthing with GI earth pipe 4.5 mtr long, 40mm
dia, including accessories, and providing
masonary enclosure with cover plate having
locking arrangement and watering pipe, with
charcoal or coke and salt etc. as required.
Set 2.00
114
S/F end termination of L.T. XLPE cables :
Supply of all materials and made termination for
the following PVC Insulated Armoured
Aluminium L.T.Cables (AYWY / XLPE) using
single compression type cadmium plated brass
cable glands, Aluminium crimped type cable
lugs, cable identification tags and including gland
earthing using copper conductor of adequate size
AL-CU strip, for termination 'of Cables etc. as
required
a 4C x 16 sq.mm Each 4.00
b 4C x 25 sq.mm Each 6.00
c 3.5C x 50 Sq.mm Each 4.00
115
S/L of L.T. XLPE cables on surface : Laying
and fixing of one number Al XLPE insulated
PVC sheathed armoured power cable of the
following size clamping on the wall using
suitable metal clamps spacing not to exceed 50
cm etc. as required.
a up to 35 sq.mm Metre 186.00
b up to 95 sq.mm Metre 120.00
Malayalam University Page 20 of 26 Estimate
Sl. No Description Units Qty Rate Amount
116
S/F 4 nos 6A plug points with modular type
accessories in combined position:
Supplying and fixing suitable size G.I box
modular plate and cover in front on surface or in
recess, including providing and fixing 4 numbers
2/3 pin combined 5/6 amps modular socket outlet
and 4 umbers 5/6 amps modular switch,
connection, testing etc. as required.
Each 35.00
NON SCHEDULE ITEMS
117
S/F 'C' Series, TP MCB : Supplying and fixing
the following rating 415 volts C series, triple pole
miniature circuit breaker suitable for lighting and
other loads, in the existing MCB DB complete with
connections testing and commissioning etc as
required.
a 40A TP Each 1.00
118
S/F 4P MCB metal enclosure: Supply and
fixing 4 way metal enclosure, on surface / recess,
complete with , earth bar, din bar, detachable
gland plate, inter -connections, phosphatized and
powder painted including earthing etc. as
required.
Each 3.00
119
S/F modular type data socket (RJ45 Cat 6) :
Supplying and fixing of modular type RJ-45 (Cat
6) data socket on the existing modular plate &
switch box including connections but excluding
modular plate etc as required.
Each 27.00
120
Supply of 1x36/40W mirror optic FTL : Supply
of 1 x 36 / 40 watt surface/ recessed mounting
type Flourescent tube lamp (FTL) mirror optic
luminaire with white powder coated CRCA sheet
steel housing & aluminium mirror reflector,
complete with all accessories and one number
36/40 watts tube etc. as per the direction of
engineer in charge as required.
Each 68.00
121
Supply of 2x36/40W mirror optic FTL : Supply
of 2 x 36 / 40 watt surface/ recessed mounting
type Flourescent tube lamp (FTL) mirror optic
luminaire with white powder coated CRCA sheet
steel housing & aluminium mirror reflector,
complete with all accessories and two numbers
36/40 watts tube etc. as per the direction of
engineer in charge as required.
Each 41.00
Malayalam University Page 21 of 26 Estimate
Sl. No Description Units Qty Rate Amount
122
Supply of 1x36W decorative box type FTL
fittings: Supply of 1 x 36 watts box type
flourescent tube lamp (FTL) with precoated
CRCA sheet steel housing wired with
commercial HF ballast, decorative end caps,
complete with all accessories and one number 36
watts tube etc. as per the direction of engineer in
charge as required.
Each 2.00
123
Supply of 2x36W mirror optic CFL fittings :
Supply of 2 x 36 watts recessed mounting type
Compact Flourescent Lamp (CFL) mirror optic
luminaire with white powder coated CRCA sheet
steel housing with aluminium mirror reflector
and swing out mounting bracket, complete with
all accessories and 2 numbers 36 watts 'L' type
CF lamps etc. as per the direction of engineer in
charge as required.
Each 4.00
124
Supply of 2x36W low glare mirror optic CFL
fittings : Supply of 2 x 36 watts recessed
mounting type low glare Compact Flourescent
Lamp (CFL) mirror optic luminaire with powder
coated CRCA sheet steel housing with square
paralite P5 louver block in a perforated metallic
frame complete with all accessories and 2
Each 9.00
frame complete with all accessories and 2
numbers 36 watts 'L' type CF lamps etc. as per
the direction of engineer in charge as required.
125
Supply of 2x11W mirror optic CFL : Supply
of 2 x 11W mirror optic surface/ recess mounting
type compact flourescent lamp (CFL) fittings
with white powder coated CRCA sheet steel
housing, aluminium mirror reflector, including
all accessories and 2 Nos 11watts 'S' type CF
lamps etc. as per the direction of engineer in
charge as required.
Each 22.00
126
Supply of 18W CFL mirror light fittings :
Supply of 18 watts compact flourescent lamp
(CFL) mirror light fittings with white powder
coated CRCA sheet steel housing with opal
acrylic diffuser and decorative end plates,
complete with all accessories and one number
18watts 'L' type CF lamp etc. as per the direction
of engineer in charge as required.
Each 8.00
Malayalam University Page 22 of 26 Estimate
Sl. No Description Units Qty Rate Amount
127
Supply of 18W CFL downlighter (recess) :
Supply of recess mounting type 18 watts compact
flourescent lamp (CFL), horizontal downlighter
fittings with white powder coated CRCA ring
with spun aluminium reflector, centre frosted
glass in ring frame fixed to the housing, wired
with commercial HF ballast, complete with all
accessories and one number 18watts 'D' type CF
lamp etc. as per the direction of engineer in
charge as required.
Each 5.00
128
SITC of 25W candle lamp ranthel light
fittings : Supply of 25 watts candle lamp type
ranthel light fittings, with well painted metalic
body and clear glass shade, complete with all
accessories and one number 25watts candle lamp
etc. as per the direction of engineer in charge as
required.
Each 10.00
129
Supply of 15/18W retrofit CFL : Supply of
15/18 watts retrofite compact flourescent lamp (R-
CFL) for the decorative brass lamp holder, etc. as
per the direction of engineer in charge as
required.
Each 12.00
SITC of 2x36W CFL outdoor fittings :
130
SITC of 2x36W CFL outdoor fittings :
Supply, installation, testing and commissioning
of 2 x 36 watts, CFL lamp fittings of epoxy black
powder coated sheet steel housing, with epoxy
white powder coated CRCA sheet steel gear tray,
clear acrylic cover, aluminium reflector with
complete accessories with two numbers 36W
CFL lamp etc, including supply of suitable size
class- B G. I. pipe (2 m), top of the pipe bend to
required angle and provision for fixing the CFL
lamp fitting, painting with 2 coats of white colour
paint, over a coat of primer, fixing on the wall by
using suitable G.I. clamp and giving connections
using required length of 2.5 sq.mm PVC
insulated and sheathed 3 core round flexible
copper wire, etc. as per the direction of engineer
in charge as required.
Each 18.00
131
Supply of 1200mm Ceiling Fan : Supply of
1200 mm sweep Electric Ceiling Fan, White
Colour, capacitor type with double ball bearing,
shackles, down rod, canopies, blades suitable for
operation on 220/ 240V, 50 Hz, single phase AC
supply conforming to IS - 374 / 1979 class I
(without regulator) high speed, etc. as per
direction of engineer in charge as required.
Each 13.00
Malayalam University Page 23 of 26 Estimate
Sl. No Description Units Qty Rate Amount
132
Supply of 1400mm Ceiling Fan : Supply of
1400 mm sweep Electric Ceiling Fan, White
Colour, capacitor type with double ball bearing,
shackles, down rod, canopies, blades suitable for
operation on 220/ 240V, 50 Hz, single phase AC
supply conforming to IS - 374 / 1979 class I
(without regulator) high speed, etc. as per the
direction of engineer in charge as required.
Each 41.00
133
S/F 400mm Wall Fan with pulling cord :
Supplying and fixing 400 mm sweep wall fan
with 3 speed positions with pulling cord and
giving connections, etc. as per the direction of
engineer in charge as required.
Each 5.00
134
Supply of 305mm Exhaust Fan with front
guard : Supply of 305 mm sweep, 1400 rpm
heavy duty exhaust fan with front guard, working
on 230 V AC supply, etc. as per the direction of
engineer in charge as required.
Each 10.00
135
Supply of Al XLPE armoured power cable :
Supply of following size heavy duty XLPE
insulated and PVC sheathed armoured power
cable, conductors of best conductivitycable, conductors of best conductivity
aluminium, 1.1 KV grade, conforming to IS 7098
(part-I) etc, as required.
a 4C x 16 sq.mm Metre 75.00
b 4C x 25 sq.mm Metre 110.00
c 3.5C x 50 Sq.mm Metre 120.00
136
S/L of Cat 6 4 pair UTP Ethernet cable :
Supply and laying CAT6 4Pair UTP Ethernet
Cable using PVC Conduits maintaining proper
clearances for the entire route as per
specifications.
Metre 850.00
137
S/F Krone box/ Telephone DB : Supply and
fixing of lockable, syntax or PVC telephone
terminal Box for 2 pair telephone cables, dust
tight and vermin proof. The work should also
include supply of all materials and termination of
two pair telephone wires & incoming Telephone
cable etc. as required.
Each 1.00
Malayalam University Page 24 of 26 Estimate
Sl. No Description Units Qty Rate Amount
138
S/F RJ 45 (Cat 6) Data cable termination Box:
Supply and fixing of 48U powder coated GI
server rack with port switch, spike & necessary
patch codes with lockable acrilyc front door,
including power plugs, termination & testing etc.
as required.
Each 1.00
139
S/F bare Cu wire for loop earth : Supply and
laying one number of the following SWG good
quality bare copper wire on surface for loop
earthing along with existing XLPE insulated
aluminium cable as required.
a 10 SWG Cu Metre 420.00
b 8 SWG Cu Metre 250.00
140
S/L 25mm X 3mm Copper strip on ground :
Supplying and laying 25 mm X 3 mm Copper
strip, as earth conductor, 0.5 mtr below the
ground level, including soldering, jointing
surface must be lead plated and using brass nut &
bolts, etc. as required.
Metre 50.00
SITC of KSEB Meter board : Fabrication,
141
SITC of KSEB Meter board : Fabrication,
supply, Installation, testing & commissioning one
number cubicle type energy meter board made
out of 2mm thick MS sheet, Powder coated,
including provision for fixing KSEB 3phase
energymeter rating above 60A, with CT's,
providing & fixing of 3nos 100A cut out fuses,
3nos 100/5A class1.0, 15VA CT's & control fuse,
phase indication lamps and one number 125A 4P
SDF with HRC and provision for locking the
incoming & Metering section and terminating
3.5x 50.0 sq. mm AL XLPE cable for incoming
and out going side, including CT testing etc, as
required.
Each 1.00
142
SITC of Control panel for 2 hP submersible
pump set: Fabrication, supply, Installation,
testing & commissioning one number control
panel board made out of 2mm thick MS sheet,
well painted over a coat of primer, with suitable
breakers, indicators, push buttons, ammeter,
voltmeter, capacitor, contactors and provision for
Each 1.00
Malayalam University Page 25 of 26 Estimate
Sl. No Description Units Qty Rate Amount
143
SITC of 2TR Split Airconditioner with
stabilizer: Supplying, installation, testing &
commissioning of 2TR split Airconditioners
suitable for single phase, 50Hz, 230 volts, A/C
supply with hermetically sealed compressor with
air cooled condenser, motor capacitor start run,
capacitors relay and over load protector
interconections including all accessories and
remote with special purpose A/C stabilizers, etc
as required.
Each 5.00
MISCELLANEOUS ITEMS.
144
S/F DCP fire extinguisher (5kg) : Supply and
Installation of 5kg Dry Chemical Powder type
(DCP) fire extinguishers having ISI mark along
with mounting supports etc. as required.
Nos 1.00
145
DOCUMENTS & APPROVAL.
Preparation of necessary forms, documents
drawings etc. and procuring approval from
Kerala state Electricity Board. all expenses
except statutory charges shall be met by
Lum 1.00
TOTAL ELECTRICAL WORKSTOTAL ELECTRICAL WORKS
Malayalam University Page 26 of 26 Estimate
Top Related