NE4 FB Nebulizers
N4FB200 – Diameter 2 mm
N4FB400 – Diameter 4 mm
N4FB600 – Diameter 6 mm
Applications:
Spray Drying, Spray Chilling
Fluid Bed, Coating, Wastes treatment,
Biomaterials production, Water Treatment, …
Standard model: length 15cm
(available in different lengths)
®
Dye in polystyrene,
5 µm, CV 69%
(PSFB240S)
Shellac,
0.5-7 µm
(PSFB500S)
Maltodextrin,
0.3-4 µm
(PSFB500S)
Nanoclays suspension (15 %),
x50: 7 µm NE-4 N4FB6000 50 l/h
Lixiviate treatment,
X50: 19.7 µm ECFB1200 90º
NE4 inside
Spray Dryer
tank
cutting-edge technology to produce a spray of extremely
fine droplets within a desired range when monodispersion
is not strictly required
Consists in the micro-mixing of fluids using a
reflux cell
Pneumatic atomization with the highest
efficiency, up to 200 times more energy-
saving
Easily adjustable droplet size, up to tens of nm
Low energy consumption
Cost efficient, very competitive price for high quantities
Simple geometry, Robust performance and low maintenance
Scalable: easily adjustable to your capacity needs, scaling out and/or up
Versatility – Compatible with any liquids,
suspensions, polymeric solutionsand emulsions
– Verified for the following material:
Dissolutions:
Alginate, Quitosan, Shellac, Maltodextrine, …
Suspensions :
Clay, Lixiviates, Brine, …
Others
Fragrances and Perfumes, Urea, Oils,…
Glycerin, Creams, Paraffin
– Qualified for high concentrations and high viscosity:
• 0,9 up to 145.000cP
Viscosity Size range x50
1 cP from 3 to 53 microns
550 cP from 9 to 30 microns
3500 cP from 8 to 85 microns
13000 cP from 12 to 93 microns
53000 cP from 18 to 30 microns
145000 cP from 35 to 55 microns
Through small changes in operational conditions you obtain different
size ranges with no need to change your Flow Blurring® nebulizer
Our technological service offer Development & Production of high value microspheres based on our proprietary technology for Microencapsulation:
Study and evaluation of starting material.
Design of innovative solutions for the required application based on our technology.
Pre-formulation studies and technology fitting.
Microparticle characterization : morphology, composition, analytical methods, etc.
Initial studies: stability, drug delivery profiles…
Scale-up and microparticle production.PI Parque Plata. C/Camino Mozárabe, 4141900 Camas, Sevilla. España/Spain
T. (+34)954 081 214 F. (+34)955 9802258
Top Related