Specifications Pro60 SENominal Size 61/2"RMS Power Handling 125 wattsPeak Power Handling 250 wattsNominal Impedance 3 ohmsFrequency Response 50Hz–22kHz (±3dB)Sensitivity 90dB (1watt @ 1meter)

High Performance 6 1/2-inch Component Speaker System

# Description Quantity1 Pro60 SE Woofer 22 Type-M1 1" Alloy Dome Tweeter 23 Pro60 SE Woofer Crossover 24 Pro60 SE Tweeter Crossover 25 Tweeter Grille 26 Tweeter Axis-Mount 27 Tweeter Flush-Mount 28 Tweeter Angle-Mount (top) 29 Tweeter Angle-Mount (bottom) 210 5 x 7" (127 x 177mm) Adapter 211 6" (160mm) Adapter 212 61/2" (165mm) Adapter 213 Woofer Gasket 2not shown Woofer Hardware Package 114 Boston Hex Tool 115 Woofer Grille 216 Small Gold Terminal 217 Large Gold Terminal 218 Crossover Bridge 219 1/2" (13mm) Spacer 2not shown 11/16" Socket Button Head Screw 620 1/4" Socket Button Head Screw 6not shown Tweeter Hardware Pack 221 1" Socket Head Screw 422 Spring Clips 423 Terminated Tweeter Wire 224 Axis-Mount Stand-Off 225 3/8" Pan Head Screw 226 1" Flat Hex Head Screw 2not shown 1/2" Pan Head Screw 227 11/8" Socket Button Head Screw 1628 11/2" Flat Hex Head Screw 229 1/2" Self-Tapping Screw 430 1" Self-Tapping Screw 431 3/32" Hex Bit 1

2 1/2” 63mm

5 1/4” 133mm

7” 177mm

1 7/16” 37mm

1 5/8"40mm

6 1/2"165mm

3 11/16"94mm

2 1/16" 52mm

1 1/2" 38mm

2" 51mm

1 3/4" 45mm

3/4"19mm

1 1/8"27mm

Boston Acoustics, Inc. 300 Jubilee Drive, Peabody, MA 01960 USA T: 978.538.5000 F: 978.538.5100 W: bostonacoustics.comBoston, Boston Acoustics, and the Boston Acoustics logo are registered trademarks of Boston Acoustics, Inc. Specifications are subject to change without notice. © 2008 Boston Acoustics, Inc. All rights reserved. Covered by patents issued and/or pending. 142-003255-0

Crossover - Single Input Signal Bridge Crossover - Daisy Chain Crossover - All Connected Crossover - Connection Crossover - Bi-Wire / Bi-Amp

21 26 14

14 24

17

3

4

3 4 3 4 3 4 3 4 3 4 3 4 3 4 4

3 3

4

16

1

6

2

5

Tweeter

Woofer

Axis-Mount Tweeter Attenuation Axis / Component Configuration

6-inch (160mm) Adapter

Key on Back Page

6½-inch (165mm) Adapter 5 x 7-inch (127 x 177mm) Adapter

Optional ½-inch (13mm) Spacer

18

13

13

11

13

19 19

13

12

13

10

15

15

31

31

20 20 27

27

28 Angle-Mount Tweeter Installation

23

29

8

30

9

2

5

23

22

7

25

2

5

Flush-Mount