7/28/2019 heeting Technical(1)
1/24
l indab coverl ine | technical information profi led sheet ing
Lindab Proled Sheeting
Technical Inormation
Lindab Coverline TM
7/28/2019 heeting Technical(1)
2/24
2
l indab coverl ine | profi led sheet ing
Number Name Nearest NCS Nearest RALTopline (0,5), Coverline
PE HBP MPE
001 Antique white S 1002-G50Y 9002 0,5/0,6
010 Chalk white S 0502-G 9010 0,4/0,5/0,6
015 Black S 9000-N 9005
0,4/0,5-
0,6/0,7/0,8/1,00,5/0,6 0,5
022 Light grey S 2005-G60Y 7044 0,5 0,6
044 Anthracite metallic S 600-N 9007 0,6
045 Silver metallic - 9006 0,5/0,6 0,5/0,6
078 Interior white S 1502-Y 90020,7/0,8/
1,0/1,2
087 Dark grey S 7005-B20G 7011 0,4/0,5/0,6 0,5
113 Beige S 1010-Y30R 1015 0,4/0,5
152 Mustard yellow S 2040-Y10R 1002 0,5
244 Zinc grey S 3502-B 7040 0,6
412 Fire red S 2070-Y90R 3000 0,5
418 Wine red S 5040-Y90R 3011 0,5
434 Brown S 8005-Y80R 8017 0,4/0,5 0,5/0,6
461 Goosewing grey S 3502-Y 7038 0,6
502 Light blue S 4030-B10G 5024 0,5 0,6
524 Dark blue S 6020-B 5001 0,5
542 Signal blue S 4550-R90B 5010 0,5
558 Azure blue S 5030-R90B 5009 0,6
742 Tile red S 4040-Y80R 8004 0,5 0,5/0,6 0,5
758 Dark red S 5040-Y80R 3009 0,4/0,5/0,6 0,5/0,6
874 Forest green S 6020-G30Y 6003 0,4/0,5 0,6
975 Verdigris S 3020-G10Y 6021 0,6
PE = Polyester, Gloss: 30 5
HBP = High Build Polyester, Gloss: 40 5
MPE = (Matt Polyester) Gloss: 5 3
The thickness o the steel is specied in mm.
This colour chart is general with variations on markets and it can be subject or changes.All o the thicknesses and colours are not available in all proles.
See the actual pricelist or correct inormation.
Technical Facts
Colour chart
7/28/2019 heeting Technical(1)
3/24
3
l indab coverl ine | profi led sheet ing
Technical Facts
Anti condensation NonDrip coating
Acoustic panels
Proled sheeting can be perorated to
damp noise. Lindab acoustic panels
are suitable or interior partitions and
roos where they are used in sports
halls, actories and canteens. Whilst
the wall panels are ully perorated, the
foor deck are only perorated on the
web in order to maintain the required
strength.
The peroration ratio is 23% in the
perorated area or all proles.
Only minor variations in the absor-
bation actor occur when diering pro-
le lenghts and/or plastic oil is used,
only give minor variations in absorption
actor.
Condensation occurs naturally on
proled sheet roos and walls in un-
insulated buildings when the tempera-
ture o the sheeting alls below the dew
point. The biggest problems occur when
the weather changes warm damp air
meets sheeting which covered andcooled by snow. Radiation condensation
is oten enough (i.e. when the sheeting
becomes cooler than the surrounding air
as a result o radiation under cloudless
conditions) or water to start dripping. I
this condensation does orm, drops o
water will run under the roo and along
the walls. This water dripping o the roo
and wall joists can cause considerable
damage to the contents o the building.
Proled sheeting can be coated with
Lindab NonDrip to reduce the problem.
NonDrip contains a mineral which can
quickly absorb and evaporate moisture.
The coating can absorb up to 300 g wa-
ter per m2. NonDrip can also retain water
on inclined or vertical suraces.
NonDrip sheeting is always supplied with
masked sides and end overlaps, to pre-
vent water rom being absorbed rom
outside the building.
It is important to observe the standards
or dimensioning and location o ventila-
The light grey NonDrip coating is able to absorb
and evaporate moisture quickly and efciently
thanks to its unique pore structure.
Evaporation is requently quicker than absorption
with NonDrip coatings.
1,2
1,0
0,2
Frequency (Hz)
Web Perforated
Perforated
Absorbtionfactor
400020001000500250125
0,4
0,6
0,8
tion openings, to achieve good drying.
The lowest recommended roo pitch is
8 to avoid stationary air which would
impede drying. A constant supply o
moisture rom an earth foor or activities
in the building can also aect the drying
process.
Warning! I drying is prevented,
the NonDrip becomes saturated
and water will drip.
7/28/2019 heeting Technical(1)
4/24
7/28/2019 heeting Technical(1)
5/24
5
l indab coverl ine | profi led sheet ing
Cladding
Technical Facts
LVP 20
115 65 25 18
Covering width = 1035 mm
Thickness, nominal mm 0.40 0.50 0.60 0.70Yield point ty N/mm
2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
SE
SIN 26
125 26
Covering width = 1000 mm
SE
Thickness, nominal mm 0.50 0.60
Yield point ty N/mm2 250 250
Mass kg/m 4.8 5.8
LV 30
167 30 104 30
Covering width = 1000 mm
SE
Thickness, nominal mm 0.60 0.70
Yield point ty N/mm2 250 350
Mass kg/m 5.8 6.8
7/28/2019 heeting Technical(1)
6/24
6
l indab coverl ine | profi led sheet ing
Technical Facts
Cladding
LVV 30
167 30 104
Covering width = 1000 mm
30
SE
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
TR 35
223
28333
Covering width = 1000 mm
30
35
SE
Thickness, nominal mm 0.50 0.60
Yield point ty N/mm2 250 250
Mass kg/m 4.8 5.8
7/28/2019 heeting Technical(1)
7/24
7
l indab coverl ine | profi led sheet ing
Cladding
Technical Facts
LVP 45
180 77 43
47
Covering width = 900
SE
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
LVP 115
Covering width = 735 mm
245 82 56
115
SE
Thickness, nominal mm 0.50 0.60
Yield point ty N/mm2 250 250
Mass kg/m 4.8 5.8
LP 1100
157 25 99
Covering width = 1100 mm
18
Thickness, nominal mm 0.40 0.50
Yield point ty N/mm2 250 250
Mass kg/m 3.9 4.8
DK
7/28/2019 heeting Technical(1)
8/24
8
l indab coverl ine | profi led sheet ing
Technical Facts
Cladding
DK
SIN 18
76 18
Covering width = 1066 mm
Thickness, nominal mm 0.40 0.50
Yield point ty N/mm2 250 250
Mass kg/m 4.0 5.0
LP 20
Thickness, nominal mm 0.40 0.53 0.60
Yield point ty N/mm2 250 250 250
Mass kg/m 4.0 5.0 6.0
DK
LP 35
Thickness, nominal mm 0.53 0.60
Yield point ty N/mm2 250 250
Mass kg/m 5.0 6.0
DK
7/28/2019 heeting Technical(1)
9/24
9
l indab coverl ine | profi led sheet ing
Technical Facts
Cladding
LVP 20
115 65 25 18
Covering width = 1035 mm
Thickness, nominal mm 0.40 0.50 0.60 0.70Yield point ty N/mm
2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
HU
LVP 45
180 7743
47
Covering width = 900
HU
Thickness, nominal mm 0.40 0.50
Yield point ty N/mm2 250 250
Mass kg/m 3.9 4.8
LVP 20
115 65 25 18
Covering width = 1035 mm
Thickness, nominal mm 0.40 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
PL
7/28/2019 heeting Technical(1)
10/24
10
l indab coverl ine | profi led sheet ing
Cladding
Technical Facts
LVP 45
LVP 20
114 64 25 18
Covering width = 1035 mm
12
17
Thickness, nominal mm 0.40 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
CZ
180 77 47
Covering width = 900 mm
43
PL
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
LVP 20 new design
114 64 25 18
Covering width = 1025 mm
12
17
Thickness, nominal mm 0.40 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
CZ
7/28/2019 heeting Technical(1)
11/24
11
l indab coverl ine | profi led sheet ing
180 7743
47
Covering width = 900 mm
Technical Facts
Cladding
LVP 45
180 77 43
47
Covering width = 900 mm
CZ
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
LVP 20
114 64 25 18
Covering width = 1035 mm
12
17
Thickness, nominal mm 0.40 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
RO
LVP 45 new design
CZ
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
7/28/2019 heeting Technical(1)
12/24
12
l indab coverl ine | profi led sheet ing
114 64 25 18
Covering width = 1035 mm
12
17
Cladding
Technical Facts
LVP 20 new design
Thickness, nominal mm 0.40 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
RO
LVP 45
180 77
43
47Covering width = 900 mm
RO
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
LVP 45 new design
180 7743
47
Covering width = 900 mm
RO
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
7/28/2019 heeting Technical(1)
13/24
13
l indab coverl ine | profi led sheet ing
Technical Facts
Roofng = paint side
LTP 18
26 134
Covering width = 1070 mm
7516
18
SE
Thickness, nominal mm 0.40 0.50 0.60Yield point ty N/mm
2 250 250 250
Mass kg/m 3.9 4.8 5.8
LLP 20
Covering width = 1000 mm
3535100 18
18
Thickness, nominal mm 0.40 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
SE
LTP 20
25
Covering width = 1035 mm
65115 18
SE
Thickness, nominal mm 0.40 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
7/28/2019 heeting Technical(1)
14/24
14
l indab coverl ine | profi led sheet ing
Roofng
Technical Facts
SIN 26
125 26
Covering width = 1000 mm
SE
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
TR 35
223
28333
Covering width = 1000 mm
30
35
SE
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
LTP 45
180 47 77
Covering width = 900 mm
43
SE
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
7/28/2019 heeting Technical(1)
15/24
15
l indab coverl ine | profi led sheet ing
Technical Facts
Roofng
TR 45
44
30 150
Covering width = 890 mm
6030
SE
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
SIN 18
DK
76 18
Covering width = 990 mm
Thickness, nominal mm 0.40 0.53
Yield point ty N/mm2 250 250
Mass kg/m 4.0 5.0
LP 20
DK
Thickness, nominal mm 0.40 0.53 0.60
Yield point ty N/mm2 250 250 250
Mass kg/m 4.0 5.0 6.0
7/28/2019 heeting Technical(1)
16/24
16
l indab coverl ine | profi led sheet ing
Roofng
Technical Facts
LP 35
LTP 20
LTP 45
180 47 77
Covering width = 900 mm
43
HU
Thickness, nominal mm 0.40 0.50
Yield point ty N/mm2 250 250
Mass kg/m 3.9 4.8
25
Covering width = 1035 mm
65115 18
HU
Thickness, nominal mm 0.40 0.50
Yield point ty N/mm2 250 250
Mass kg/m 3.9 4.8
DK
Thickness, nominal mm 0.53 0.60
Yield point ty N/mm2 250 250
Mass kg/m 5.0 6.0
7/28/2019 heeting Technical(1)
17/24
17
l indab coverl ine | profi led sheet ing
Roofng
Technical Facts
LTP 20
25
Covering width = 1035 mm
65115 18
PL
Thickness, nominal mm 0.40 0.50Yield point ty N/mm
2 250 250
Mass kg/m 3.9 4.8
LTP 45
18043
47 77
Covering width = 900 mm
PL
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
LTP 20
25
Covering width = 1035 mm
65115 18
CZ
Thickness, nominal mm 0.40 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250 250
Mass kg/m 3.9 4.8 5.8 6.8
7/28/2019 heeting Technical(1)
18/24
18
l indab coverl ine | profi led sheet ing
Technical Facts
Roofng
LTP 45
18043
47 77
Covering width = 900 mm
CZ
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250
Mass kg/m 4.8 5.8 6.8
LTP 45 new design
18043
47 77
Covering width = 900 mm
CZ
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250
Mass kg/m 4.8 5.8 6.8
LTP 20
25
Covering width = 1025
64114
1112
18
RO
Thickness, nominal mm 0.40 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
7/28/2019 heeting Technical(1)
19/24
19
l indab coverl ine | profi led sheet ing
Technical Facts
Roofng
LTP 20 new design
25
Covering width = 1025
64114
1112
18
RO
Thickness, nominal mm 0.40 0.50 0.60 0.70
Yield point ty N/mm2 250 250 250 350
Mass kg/m 3.9 4.8 5.8 6.8
LTP 45
18043
47 77
Covering width = 900 mm
RO
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
LTP 45 new design
18043
47 77
Covering width = 900 mm
RO
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
7/28/2019 heeting Technical(1)
20/24
20
l indab coverl ine | profi led sheet ing
Technical Facts
Roofng uninsulated
LTP 115
82245 56
115
Covering width = 735
SE
Thickness, nominal mm 0.50 0.60 0.70
Yield point ty N/mm2 250 250 350
Mass kg/m 4.8 5.8 6.8
Roofng insulated
LTP 115
Covering width = 735 mm
5682245
115
SE
Thickness, nominal mm 0.70 0.80 1.00 1.20
Yield point ty N/mm2 350 350 350 350
Mass kg/m 6.8 7.7 9.7 11.6
7/28/2019 heeting Technical(1)
21/24
21
l indab coverl ine | profi led sheet ing
Notes
7/28/2019 heeting Technical(1)
22/24
22
l indab coverl ine | profi led sheet ing
Notes
7/28/2019 heeting Technical(1)
23/24
23
l indab coverl ine | profi led sheet ing
Notes
7/28/2019 heeting Technical(1)
24/24
l indab coverl ine | technical information profi led sheet ing
Lindab Building Components is a business area within
the Lindab Group that develops, manuactures and
markets ecient, economical and aesthetic steel and
sheet metal solutions or the building industry.
We oer a wide range o components and systems
or all types o housing, as well as commercial and
industrial buildings.
Lindab Building Components is represented in over
30 countries throughout Europe. Our head oce is in
Frslv, in the south o Sweden.
SE-269 82 Bstad
Phone +46 (0)431 850 00
Lindab Profle
Top Related