With a Mohs hardness of 9, aluminum oxide is used in many polishing agents for industrial and consumer uses. Our aluminum oxides vary in friability, surface area, degree of calcination and particle size distribution, because polishing performance differs depending on the substrate. Example surfaces include soft metals, hard metals, painted surfaces, plastics and silicon wafers.
With the extensive product line also comes decades of experience. Let Huber’s experts help you to select the right alumina for your specific requirements.
Our Martoxid calcined alumina product portfolio begins with the extremely hard calcined Martoxid® DN grades, a series of high performing grinding agents used primarily for the first step in smoothing glass, silicon wafers, crystal surfaces and marble: •Martoxid®DN-6 •Martoxid®DN-440•Martoxid®DN-430 •Martoxid®DN-206
For polishing of steel and non-ferrous metals and for the grinding of paints and plastics, we recommend our line of intermediate preliminary polishing products: •Martoxid®MZS •Martoxid®MZS-12 •Martoxid®MZS-3
For high gloss polishing of stainless steel and non-ferrous metals or for fine grinding of plastics and paint surfaces, our soft and very soft grades of friable calcined alumina are required. Here again, a variety of Huber | Martinswerk Martoxid grades are available and include: •Martoxid®PN-6 •Martoxid®PN-202 •Martoxid®PN-505•Martoxid®PN-6(12) •Martoxid®PS-6 •Martoxid®PS-6(12)•Martoxid®PC12-3 •Martoxid®PC12-1
When looking for a high performing and reliable hard or soft abrasive agent to handle your most challenging polishing and grinding industrial applications, look no further than the broad line-up of Martoxid® calcined aluminas from Huber | Martinswerk.
To get a better understanding of our comprehensive Martoxid® product offerings, below is a snapshot of the typical properties. For a sample of any of the Martoxid grades listed below, visit hubermaterials.com/polishing or email us at [email protected].
Martoxid® Calcined Aluminas for Polishing and Grinding TypicalProperties
Martoxid® Product
Martoxid®DN-6Martoxid®DN-440Martoxid®DN-430Martoxid®DN-206
Martoxid®MZSMartoxid®MZS-12
Martoxid®MZS-3
Martoxid®PN-6Martoxid®PN-202Martoxid®PN-505
Martoxid®PN-6(12)Martoxid®PS-6
Martoxid®PS-6(12)Martoxid®PC12-3Martoxid®PC12-1
Al2O3
99.699.699.699.6
99.899.899.8
99.699.699.899.699.899.899.699.6
Na2O Total
0.30.30.30.3
0.10.10.1
0.30.30.10.30.10.10.30.3
Surface Area
0.40.50.60.7
11
1.2
10118
105
1055
Average Particle Size (D50 and D90 µm)
80 and 20020 and 8010 and 506 and 15
70 and 12010 and 703 and 12
80 and 2203 and 252 and 12
35 and 6030 and 5025 and 301.7 and 121.5 and 9
Primary Crystal Size (µm)
6666
2.52.52.5
1111
0.50.50.50.5
Oil Absorption (ml/100g)
50302520
603025
6030254565653535
Cutting Effect
9887
754
32132221
Polishing Effect
1233
356
899999
1010
Intermediate(PreliminaryPolishing)
Hard(Grinding)
Soft(High-GlossPolishing)
THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Refer to the Huber’s Standard Conditions of Sale for the only express warranties applicable to the Huber products. Products incorporating Huber products are not warranted by Huber. In no event is Huber liable for consequential damages. Martoxid® and Martinal® are used, applied for, or registered as a trademarks of Martinswerk GmbH in various countries around the world. Hydral® is used, applied for, or registered as a trademark of Huber Specialty Hydrates, LLC for alumina trihydrate in various countries around the world.©2017 J.M. Huber Corporation Martoxid/CalcinedAlumina/Polishing//RevI/July2017
Huber | Martinswerk has been supplying calcined aluminas for more than half a century. In addition to our comprehensive portfolio of innovative products for your next polishing or grinding application, we offer superior technical support and unparalleled customer service. Our unsurpassed technical expertise is its foundation in developing high performing products that meet the exacting requirements for each application.
Huber | Martinswerk has a deep dedication toward customer care and strives to provide fast, personalized service to ensure a rewarding experience for its customers, time after time. We look forward to working with you. Contact us today for more information and samples of our array of Martoxid® calcined alumina products for your polishing and grinding applications.
Martoxid® Calcined Aluminas Product Positioning for Polishing and Grinding
Martoxid® Calcined Aluminas Product ListHard (Grinding)•Martoxid®DN-6•Martoxid®DN-440•Martoxid®DN-430•Martoxid®DN-206
Intermediate (Preliminary Polishing)•Martoxid®MZS•Martoxid®MZS-12•Martoxid®MZS-3
Soft(High-Gloss Polishing)•Martoxid®PN-6•Martoxid®PN-202•Martoxid®PN-505•Martoxid®PN-6(12)•Martoxid®PS-6•Martoxid®PS-6(12)•Martoxid®PC12-1•Martoxid®PC12-3
88
80
72
32
24
16
8
00 2 4 6 8 10 12 14
Typi
cal D
50 V
alue
[µm
]
Abr
asio
n
High
Low
PN-6DN-6
Specific Surface Area (BET) [m2/g]
MZS
PS-6
PN-6(12)
PS-6(12)
PN-202, PN-505PC 12-1PC 12-3
DN-440
MZS-12
DN-430
DN-206
MZS-3
Calcination Degree
PrimaryCrystal Size
Abrasion
SpecificSurface Area
PolishingEffect
m522.0 2/g
High
High
High
Low
Low
Low
Low
High
88
80
72
32
24
16
8
00 2 4 6 8 10 12 14
Typi
cal D
50 V
alue
[µm
]
Abr
asio
n
High
Low
PN-6DN-6
Specific Surface Area (BET) [m2/g]
MZS
PS-6
PN-6(12)
PS-6(12)
PN-202, PN-505PC 12-1PC 12-3
DN-440
MZS-12
DN-430
DN-206
MZS-3
Calcination Degree
PrimaryCrystal Size
Abrasion
SpecificSurface Area
PolishingEffect
m522.0 2/g
High
High
High
Low
Low
Low
Low
High
Email: [email protected]: hubermaterials.com/polishingEurope / Middle East / Africa North America Asia PacificMartinswerkGmbH HuberEngineeredMaterials HuberFireRetardantAdditives(Qingdao)Co.Ltd.KölnerStraße110 3100CumberlandBlvd. 8thFloor;No.2Building,No.7D-50127Bergheim Suite600 WuyishanRoad+49-2271-902-0 Atlanta,Georgia30339 HuangdaoDistrictFax:+49-2271-902-710 866-564-8237 Qingdao,Shandong 266555China +86-532-58792008
Top Related