Funplay srl
Certifications Profile
Certifications Profile
Quality
• ISO 9001• ISO 14001
HIC Test EN1177
• FunShock 40mm• FunShock 45mm• FunShock 70mm• FunShock 100mm
Atossic Test
• EN 71/3• IPA
Certifications Profile
Quality
• ISO 9001• ISO 14001
Certifications Profile
HIC Test EN1177
• FunShock 40mm• FunShock 45mm• FunShock 70mm• FunShock 100mm
The anti-shock flooring FunShock 40
HIC 1000: drop height 1573 mm
The anti-shock flooring FunShock 45
HIC 1000: drop height 1950 mm
Viale Lombardia 20 - 20021 Bollate (MILANO) - ITALYTel. +39.2.383301 - Fax +39.2.3503940
CERTIFICATO DI CONFORMITÀTYPE APPROVAL CERTIFICATE
Fabbricato da: Manufactured by
è conforme aare found to comply with
Il Responsabile del Centro Managing Director
Dott. Ing. P. Cau
Data / Date10/12/2007
Registrazione n.°1012/07Registration number
si certifica chethis is to certify that
UNI EN 1177HIC 1000: altezza di caduta 2553 mm
FUNPLAY s.r.l.Via Fontana, 25
20122 Milano (MI)
Visto il rapporto di prova CSI n. 0038a/ME/MCR/07 del 10/12/2007Referring to the CSI test report n . 0038a/ME/MCR/07 dated 10/12/2007
Pavimento antitrauma FunShock 70The anti-shock flooring FunShock 70
HIC 1000: drop height 2553 mm
The anti-shock flooring FunShock 100
Certifications Profile
Atossic Test
• EN 71/3• IPA
Test Report N. 529/08
Date received:Starting test:End test date:Sampling date:
Sample type: Samples of different originSample description: Green EPDM rubber granuleSample procedure: Sample delivered by the customer
Parameters Units Value Limits Analytical Method
Test Report N. 529/08
*Test is non accredited by SINAL
Uncertianty values were calculated using a coverage factor equal to the Student’s t at 95% probability and 7 degrees of freedom (2,36)
Analysis conducted on the sample, were carried out with suitable equipment that is regularly subjected to calibration and maintenance. The documentation for these controls is available in our laboratory.The test results relate only to the sample tested;SINAL is not responsible for the results of analytical and compliance statements produced by the laboratory.The test report is valid only if reproduced in its entirety, and its partial reproduction has to be approved in writing by the Laboratory.