FIX
ING
IN
TH
E W
AS
TE
FIX
ING
DO
WN
BA
SIN
+ S
EA
LIN
G E
DG
E01
01
04
04
02
02
05
05
03
03
06
06
Run a line of clear wet area silicon around the underside of the basin
10mm back from the edge
Run another line of clear wet area silicon 20mm back from the
waste hole
Press down into benchtop and remove excess silicon using wax
and grease remover and soft cloth
Run a bead of clear wet area silicon around the waste rim
Be generous with application. It is critical that silicon overflows
when waste is placed down
Slide waste into place
Run a bead of clear wet area silicon to fill the gap between the
basin and benchtop
Smooth silicon off to a neat finish and wipe clean with wax
and grease remover
Please ensure the edge is wateproof and 100%, so that water
can never get under the basin
Hand-tighten waste. Do not over tighten.
Carefully push silicon around gap between waste and sink
Clean excess with wax and grease remover and let dry for 24 hours
additional infoFOR MORE INFORMATION ON BASIN WARRANTY,
MAINTENANCE AND INSTALLATION, PLEASE VISIT:
WARRANTYnoodco.com.au/sink-warranty
MAINTENANCEnoodco.com.au/sinks-info/#maintenance
INSTALLATIONnoodco.com.au/sinks-info/#install
Top Related