FIXED STAGE UPRIGHT MICROSCOPE
BX51WIFIXED STAGE UPRIGHT MICROSCOPE
WITH MOTORIZED FOCUSING
BX61WI
UNIVERSAL INFINITY SYSTEM
1
BX51WI with Luigs & Neumann Accessories.
A dual commitment:Preventing vibration andprotecting living cell specimensOne design theme was central to the development of
the new fixed stage microscopes from Olympus — achieve an even
higher standard of stability and reliability in electro-physiological applications.
The result is a wide range of advanced new features to avoid and prevent vibration.
These innovations include the introduction of a new observation method along with
detailed analysis of operability and further refinements in image clarity. These improvements
work together to make patch clamp operations smoother and more efficient than ever before.
Combined with the traditional excellence of UIS optics, the new Olympus fixed stage
microscopes define new levels of quality in both performance and ease of use.
2
New concept
High N.A. objective offeringexcellent performance inIR-DIC observation, membrane potential imaging and fluorescence observation
Front operation and reduced vibration for improved operability and stability
Raising the objective and lowering the stage ofthe microscope enables easier experimentation onsmall animals
Fluorescence macro objectives formembrane potential observation
A special bridge stage and X Y mover are available for
the microscope frame
Full-system physiologicalconfocal microscope,BX61WI with Z-axis motor is LSM ready
IR-DIC and IR obliqueillumination condenser fordeep-section observation
An intermediate magnification changer is used to change magnification without changing objectives
7× Intermediate magnification 0.35 x 80× Intermediate magnification4 x
Examples usingintermediatemagnification
changer WI-DPMC
IR-DIC observation, trigeminal motoneuron, Tomio Inoue Ph.D, Department of Oral Physiology, Showa University
N.A.0.95
XLUMPLFL20xW
Interchanging low and high magnifications without changing objectives.A new concept in vibration-free design.A major concern for researchers conducting electro-physiology experiments is the vibration which occurs when switching objectives and the resulting interference this can cause to the specimens and adjacent equipment. To solve this problem, Olympus introduces a new concept — the provision of an intermediate magnification changer in combination with the new High N.A. long working distance 20x objective that allows the user to switch between low and high magnifications without the need to switch objectives.
3
New 20x objective (XLUMPLFL20XW) N.A. 0.95; W.D.: 2.0mmThe new 20x water immersion objective makes high-resolutionobservation possible with a wide range of intermediate magnificationlenses. Since exchanges between low and high magnification areperformed through the intermediate magnification changer, vibrationis reduced to a minimum and the usual concern about collisionsbetween objectives and patch clamp electrodes is eliminated.
Condenser
Filter turret
IR-DIC portIR-DIC
XLUMPLFL20xWN.A. 0.95
Video portFL/DIC
Light path exchange lever
Intermediatemagnificationchange lever
IR filter(not to use with visiblelight DIC observations)
Observation portFL/DIC
Dual portWI-DPMC
Mirror unit exchange turret
0.35x(0.25x) lens
Tube lens
Mirror unit
DIC Prism
Analyzer
C mount
Dichroic mirror
4x lens
Polarizer
1/4 wave plate
DIC element
Excitation light
Fluorescence light
IR-DIC
Transmitted light
4 4
Simultaneous fluorescence and IR-DIC observationsWith the included 690nm dichroic mirror in the WI-DPMC,fluorescence light is sent to the front port, and IR-DIC light is sentto the back port allowing two cameras to image simultaneouslywith no vibration introduced by light path selection.
Variable magnification dual port (WI-DPMC)The WI-DPMC rear camera port includes a 2 position intermediatemagnification selector. A high magnification 4x intermediate lens isincluded and a (0.25x, or 0.35x) low magnification lens is optional.High or low magnification selection is via a single lever with noclick-stops or detents allowing a specimen to be scanned andmeasured with minimal disturbance from vibration. 775nm and 900nm IR-DIC compatible.*Available for 0.5x, 1x and 2x intermediate magnification lenses by special order.
Variable Click-stopsAll click-stops, as when selecting between camera and observation modes, can be adjusted to the point of no click and thus no vibration.
q Vibration-free shutterThe fluorescence shutter slides horizontallywith no detents and no vibration.
y A waterproofing sheetA waterproofing sheet, attached by thesupplied magnets, provides protectionagainst liquid overflow and spills. The sheet is large enough to protect the frame, condenser and focusingmechanisms .
e Ample space around the condenser
Frame designed for ample space aroundthe condenser, making it easy to adjustNomarski DIC contrast, exchange filters,adjust the condenser's aperture stop and to easily switch between visible light,Nomarski DIC or IR-DIC.
w Mirror unit turret with adjustable click release
The click-stop on the 6 position turret canbe released with a precision screwdriver.
r Front focus knobs close to the operator's hand
Fine focus control is located at the front onboth sides of the microscope body. The knob on the right integrates bothcoarse and fine focus control.
t Coarse focus lock leverWhen engaged at the desired position, the objective can be raised with the coarsefocus knob and then returned precisely toits original position.
Front operation with no shock and no noise.A new concept in experimental operation.
r
e
wq
The new front operation system preventsinterference in patch clamping work. The design concept is simple and allowsfrequently performed operations likefocusing or filter exchange to be doneeasily at the front of the unit. Ample space is provided on both sides ofthe microscope frame and condenser, so the necessary manipulation equipmentcan be positioned close to themicroscope.
5
t
Special bridge stage andmicroscope mover for the BXWI■ XY mover WI-XYM The XY mover allows the movement ofthe microscope frame without movingeither the specimen or electrodes.Especially useful for multiple patch-clamping experiments, the XY moverhas convenient frontal controls.
■ Bridge stage WI-XYSThis stage is designed for small animal,in-vivo observations; Stage height can be lowered 50mm by simply detaching thecolumn spacers. Designed for use with the XY mover (WI-XYM), the stage platformis compact requiring minimal desk space. Stage top is pre-tapped and ferro-magnetic for flexibility in mounting manipulators. * Some manipulators cannot be used, due to the size of the stage.
u Remote power supply and hand switch
The remote TH4 power supply fortransmitted light is designed with no cooling fan to minimize electrical noise.Features on/off and intensity controls. Can also be used with the optional TH4-HShand switch providing light intensity andon/off control a maximal distance awayfrom the Faraday cage.
This nosepiece features a new swing-slidemotion, whereby the objective swingsforward while being raised. As a result, the objective clears the walls of the perfusion chamber. This motion alsoprevents the trapping of air bubbles whenthe objective is lowered.
Olympus offers a wide choice of nosepieces for different applications.
The new swing-slide nosepiece prevents the intrusion of air bubbles
Swing-slide nosepiece WI-SSNP
Single position nosepieceWI-SNPXLUDesigned to accept the unique, large diameterXLUMPLFL20x objective.
RMS adapter WI-RMSADThis adapter enables the attachment of an objective withRMS thread size to the WI-SNPXLU.
Swing nosepiece WI-SRE2Uniquie slim, compact design and front-to-back swingmotion permits objective changes without interfering withelectrodes and micromanipulators. Objective positioningincorporates a vibration-free counterspring mechanism.
Slide nosepiece WI-SLREThis nosepiece is designed for the attachment of onelarge diameter, low magnification fluorescence objective(XLFLUOR 2x/340 or 4x/340) and one objective withnormal (RMS) diamerter threads. Nosepiece motion is asimple horizontal slide.
u
6
Culture cell observationIX-SVL2 general purpose platformstage. Mounts for left or right handoperation. Provides stabile specimen X-Y movement.
BX51WI+IX-SVL2
y
Raising the objective and lowering the stage to enable small animal experimentsThe arm height raising kit (WI-ARMAD) provides an additional 40mmof clearance and is mounted between the microscope frame and thereflected light illuminator. Small animal experiments usually do notrequire transmitted light thus allowing the removal of the substagecondenser assembly. After removal, the stage may be lowered anadditional 50mm, providing a total clearance increase of 90mm.
A variety of convenient units toadd light sources and control the light
Lamphouse adapter U-LHADThis adapter allows the mounting of the dual port (U-DP) between the microscope frame and lamp housing.
Rectangular field stop U-RFSSDesigned for use with CCD cameras, prevents photobleaching of the specimen outside of the imaging area.
Pinhole unit BX-RFSPOTLighting the cell via a pinhole allows experimentation on reaction to light. Optional MELLES GRIOT's ø16pinhole is used.
New functionality and solutions tomeet a wide variety of needs.A powerful new concept.
U-DP
U-LHAD
WI-ARMAD
BX-RFSPOT
Removable AS/FS(photo shown is BX-RFA)
Experimenting with small animals
Photoactivation
Normal configuration 40mm more clearance via WI-ARMAD Detaching the condenser assembly and lowering the stage by 50mmprovides maximal clearance
7
40mm
50mm
18mm
W.D.
18mm
W.D.18mm
40mm
W.D.
U-RFSS
8
BX Stage and adapter for injection experimentsThe stage adapter WI-STAD is designed to allow the attachment of a traditional microscope right or left hand stage to the WI frame. The compact design of the BX2 stage (U-SVRB-4, or U-SVLB-4)reduces the distance between the specimen and the manipulator and creates a stable platform for injections.
Microinjection
Confocal Microscope System
BX61WI — Built in Z-axis focus motor The BX61WI frame incorporates a precise Z-axis focus motor with0.01µm step size. Designed to incorporate the Olympus Fluoviewscan unit and software, the BX61WI is ready for confocal z-stacks.Microscope frame includes programmable buttons for a wide variety of applications.
BX51WI+WI-STAD+U-SVRB-4
Convenient, optional focusing hand switch U-FH for remote operationThe remote hand switch allows the user to control the microscoperemotely via a 2 meter connection cable. Hand switch allows theselection of coarse and fine focus movement, and nosepiece escape/return. Hand switch buttons can also be custom programmed forindividual needs.
Optional Olympus Fluoview Confocal System FV1000/FV300With the scanning unit set at the back of the microscope body,compact layout in the cage is possible.
Moving the microscope and scanning unit together (mover available by special order)Allows X and Y movement of both the microscope and scan unittogether while the stage and specimen are fixed.
Additional lasers and accessoriesAn assortment of lasers can easily be attached to satisfy a widevariety of applications.
Setting example: BX61WI+FV300U-FH
9
Ultimate image clarity for electro-physiological experimA new concept in live cell observation.
Senarmont compensation for Nomarski DIC observationWhen using a Senarmont equipped condenser, all contrastadjustments are performed with the 1/4 wave plate below thecondenser, thus eliminating the risk of bumping the stage, specimen, manipulators or nosepiece.
IR-DIC/ Nomarski DIC observation
Oblique illumination observationOblique observation optimizes contrast by changing the direction of the specimen shadowOlympus has developed an oblique condenser (WI-OBCD) whoselong working distance enables the angles of shadow to be alteredthrough 360 degrees without moving the specimen. Requiring noadditional accessories, oblique illumination is easy to set up andcontrol. Plastic dishes (normally unsuitable for all types of DIC) areeasy to image with oblique illumination. The oblique illumination slitaperture is variable in size and on a slider allowing quick changeover.
IR-DIC Optimized Optics:Designed for observations at 775nm to 900nmThanks to the precisely aberration-compensated IR-DIC opticscovering from visible to near infrared light of 775nm/900nmwavelength, the clarity of images observed under near infrared lighthas been improved still further, allowing clear observation of evendeep sections of brain slice.• Visible light DICAllows operator high-resolution observation of the tissue surface.• 775nm IR-DICIn combination with an IR camera allows observation within the tissueslice. Optics are corrected for visible and IR wavelengths allowingfast switching between wavelengths with minimal refocusing.• 900nm Nomarski DICAllows observation deeper into the tissue (requires special polarizerand analyzer optimized for 900nm).
Analyzer
DIC prism
Objective
DIC prism
1/4 wave plate
Polarizer
IR filter(not to use with visiblelight DIC observation)
Nucleus of solitary tract from slice of rat medulla oblongata (thickness: 400µm )Prof. Fusao KatoSchool of Medicine Physiology Dept.,Jikei UniversityKato & Shigetomi, J. Physiol.(2001), 530: 469-486
Universal condenser with DIC for improved contrastSuitable for use in visible and 775nm/900nm near-infrared light,the U-UCD8 universal condenser is a high N.A., short workingdistance condenser offering improved contrast in nerve cellobservations, for example.
Adjustable
U-UCD8
WI-TP137WI-DICT
WI-OBCD
Rotatable
ments.
10
Transverse cryostat section through the hippocampus of a mouse at postnatal day 10 was stained with a mouse monoclonal anti-neurofilament-L (Chemicon, MAB1615) .An FITC-conjugated anti-mouse antibody was used for detection of NF-L.Objective: XLFLUOR4x/340Masaharu Ogawa,Ph.DLaboratory for Cell Culture Development,Brain Science Institute, Riken
Observing changes in membrane potential
Fluorescence macro observation
Measuring changes in membrane electric potential by using the XLUMPLFL20xW objective with N.A. 0.95The XLUMPLFL20xW objective, with its high N.A., and 2.0mm of working distanceallows the measurement of cell membraneelectric potential (as seen right). Also, the4x macro objective (XLFLUOR4x/340) canbe used to measure membrane potential at the tissue level. A water immersion cap (XL-CAP) can be attached to the macro 2xor 4x objectives to eliminate disturbancescaused by water ripples.
2x and 4x Macro lenses with high numerical apertures provide fluorescence images Designed for GFP imaging of large cells such as neurons2x and 4x low magnification fluorescence objectives and a specialGFP observation mirror unit are available. The objectives have a longworking distance for maximum flexibility. An optional water
immersion cap (XL-CAP)is also available toremove imageaberrations caused byripples on water surfaceof immersed specimens.
Imaging of neuronal activity with voltage sensitive dyeSpread of neural activity in area CA1 of acute rat hippocampal slice (400µm thick) in response to a singlestimulation applied to Schaffer collateral pathway imaged (at frame rate of 0.7 ms/frame) with a fluorescentvoltage sensitive dye (VSD; Di-4-ANEPPS). The fluorescent image (90x60 pixels) captured by a digital high-speed CCD camera (MiCAM01, Brain Vision Inc.; with 20x objective and 0.5x adapter) is superimposed on theillustration of a hippocampal slice (upper left panel). The image is enlarged and shown on the illustration ofpyramidal cells (solid line) (lower left panel). Each laminar of CA1 is shown as follows: SO-A, Stratum oriens-alveus; SP, Stratum pyramidal; SR, Stradum radiatum. The individual somas of cells were visible (indicated bydotted circle on the image) and were found along the stratum pyramidal. The changes in the fluorescence ofVSD (optical signal) in accordance with the membrane potential change upon a stimulation (Stim) onto Schaffercollateral (Sch) were pseudo-color encoded and shown as consecutive images (upper right panel; number ineach image shows time from the stimulation (ms)). The depolarizing signal (red) spread along Schaffer collateral,which was followed by a hyperpolarizing signal (blue) originated in stratum pyramidal. The time courses ofoptical signals in representative pixels are shown in lower right traces.
Takashi Tominaga Ph.D, Brain-Operative Device Lab., Brainway Group, Brain Science Institute, Riken
U-SLRE
XLFLUOR2x/340 XLFLUOR4x/340
U-MF/XLU-MGFPA/XLU-MGFP/XL
Intermediate magnification changer U-ECA, U-CAThe U-ECA, which includes a 2x intermediate magnification position,allows quick magnification changes to a camera or observer withoutthe need to change objectives. The U-CA includes a 4 position turretthat allows rapid switching between a 1x, 1.25x, 1.6x and 2xpositions. Both changers accept standard Olympus adapters forattaching a wide rangeof cameras.* U-ECA and U-CA are not recommended for IR observationwith the U-TR30 trinocularobservation head.
Accessories
Multi double port tube U-DPTSThe U-DPTS accepts an optional dichroic mirror allowing theincoming to be split between visible and infrared and be observedsimultaneously using two cameras.* A fluorescence mirror unit is required.
Camera control unit
Monitor
Camera for IR
U-DPTS
General camera
Water immersion objective for IR
Optical element for DIC
DIC prism
IR filter (700— 900nm)
Tube lensAnalyzer
Mirror unit
Excitation light
Transmitted light
Dichromatic mirror
Depth100 — 150µmBrain slice
300— 400µm
Condenser
Polarizer1/4 wave plate
Monitor
C-mount video magnification change unit (IR-compliant)U-TVCACThe U-TVCAC includes a 3-position turret with 1x, 2x, and4x IR corrected positions.Includes a standard c-mount top port.
UIS Objectives
Objectives N.A. W.D. (mm) Visible light 775nm 900nmLong working distance no cover water immersion UMPlanFL10xW 0.30 3.3 ❍ ❍ —objective UMPlanFL20xW 0.50 3.3 ❍ ❍ —
LUMPlanFL40xW 0.80 3.3 ❍ ❍ —LUMPlanFL60xW 0.90 2.0 ❍ ❍ —LUMPlanFL100xW 0.90 1.5 ❍ ❍ ❍
For near IR-DIC observation LUMPlanFL40xW/IR2 0.80 3.3 ❍ ❍ ❍
LUMPlanFL60xW/IR2 0.90 2.0 ❍ ❍ ❍
Long magnification fluorescence objective XLFLUOR2x/340 0.14 21.0 (include 5mm water) ❍ ❍ —XLFLUOR4x/340 0.28 29.5 (include 5mm water) ❍ ❍ —
20x super high N.A. objective XLUMPLFL20xW 0.95 2.0 ❍ ❍ ❍
11
U-CMDPTSU-PMDPTS
U-DPTS
U-ECA U-CA
U-TVCAC
WI-XYM dimensions (unit: mm)
12
BX51WI/BX61WI specifications
WI-XYM, WI-XYS specifications
M6 depth 6
380
ø9 holeø7 holeø7 hole
355.5(14in)275 11
1056
ø40
38
70 78
105
108
150
200
216
33
8
7
11.3
11.3
60 7755
68
58ø40
68
10
160
2830
28
100
10
200
110
30050
∅ 105
∅ 58 ∅ 40
180
209
50
1.8
1227
1
11xP25=275 12.540020.7
ø7 hole
12xP
25=
300
380
100
100
5050
50
5020 50
WI-XYS dimensions (unit: mm)
Optics UIS optical systemMaterial Aluminum
Illumination BX51WI Microscope Built-in Koehler illumination for transmitted light (F.N. 22), external light source, body 12V100W long life halogen bulb (pre-centered)(average lifetime: approximately 2,000 hours)Light source Light adjustment: DC2.5V g 12.6V (continuous adjustment) 8.4A max.TH4 Power consumption: 150W, dimensions: 75(W) x 125(W) x 200(D) mm, weight 2kg
BX61WI Microscope Built-in Koehler illumination for transmitted light (F.N. 22)body 12V100W long life halogen bulb (pre-centered)(average lifetime: approximately 2,000 hours)
Light adjustment: less than DC2V g 12V (continuous adjustment)Brightness adjustment, light preset switch
Light source Power consumption: 200W,BX-UCB dimensions: 125(W) x 216(W) x 310(D) mm, weight 5kg
Focus BX51WI Nosepiece focus by roller guide (rack & pinion)Stroke per rotation; fine: 0.1mm coarse: 15mm maximum stroke: 25mmCoarse lower limit stopper mechanism, Torque adjustment mechanism for coarse focus
BX61WI Motorized focusing using stepping motor and ball screwNosepiece focus by cross roller guideMinimum graduation; fine: 1µm (sensitivity 1µm) resolution: 0.01µm, maximum stage movement speed: 3mm/s.Stroke per rotation; fine: 0.1mm coarse: 1mmStroke: 25mm, stage escape mechanism
Nosepiece WI-SRE3 Swing nosepiece DIC prism: WI-DICTHRA, WI-DICT nosepiece arm: WI-NPA
U-SLRE Slide nosepiece DIC prism: DIC observation is not available nosepiece arm: WI-NPA WI-SNPXLU Single position nosepiece DIC prism: WI-DICTHRA, WI-DICT nosepiece arm: WI-NPA
WI-SSNP Swing-slide nosepiece DIC prism: WI-DICTHRA, WI-DICT nosepiece arm: integratedFluorescent BX-RFA BX fluorescence illuminator, excitation balancer attachable, FS/AS detachableilluminator BX-URA2 BX reflected light illuminatorObservation U-TR30-2 Trinocular, F.N.: 22, inclination angle: 30°, interpupillary distance: 50mm — 76mmtube Light path exchange; 3 steps q BI: 100% w BI: 20% video, photo: 80% e Video, photo: 100%
U-ETR-4 Erect image trinocular, F.N.: 22, inclination angle: 30°, interpupillary distance: 50mm — 76mmLight path exchange; 2 steps q Binocular: 100% w Video, photo: 100%
WI-DPMC Double port magnification change unit, F.N.: 22, inclination angle: 24°,interpupillary distance: 50mm — 76mm, Light path exchange; 3 steps
Stage IX-SVL2 Mechanical stage, fixed to microscope body with WI-FSH, cross movement mechanism, X, Y axes handle torque adjustable (rack & pinion), movement range: 43mm(Y) x 50mm(X)
WI-XYS Fixed on the anti-vibration table, cross movement mechanism (moved together with microscope body by WI-XYM)
U-SVL(R)B-4 Used together with WI-STAD, cross movement mechanism, X, Y axes handle torque adjustable (rack & pinion), movement range: 52mm(Y) x 76mm(X)
Long WI-UCD Universal condenser, N.A.: 0.8, W.D.: 5.7mm, with variable A.S. mechanism, turret: 4-position, four DIC prisms attachable working Built-in quarter wavelength platedistance WI-DICD DIC condenser, one DIC prism attachable condenser
WI-OBCD Oblique condenser, built-in variable oblique illumination stop
WI-XYM Microscope BX51WI, BX61WIX-Y stroke 25mm (minimum graduation 10µm)
Maximum loading 294N (30kgf)Weight Approx. 9.1kg
Applicable 25mm or 50mm pitch with M5, M6 screw holesanti-vibration table 1inch or 2 inch pitch with 1/4-20UNC screw holes
FixableWI-XYS Stage height 271mm or 221mm
Manipulator setting Fixable to ø7mm or 25mm pitch holes with M5 or M6 bolts and nuts
Material Iron (magnet can be used)
Weight Approx. 22.1kgApplicable 25mm or 50mm pitch with M5, M6 screw holesanti-vibration table 1inch or 2 inch pitch with 1/4-20UNC screw holes
WI-DPMC specifications
Optical 3 steps BI: 100%light path Front port 100%exchange Simultaneous use of front (visible light) and back (near IR light) ports
Clicker ability adjustable
Binocular F.N. 22, inclination angle 24°, observation tube Interpupillary distance: 50 — 76mmFront port For fluorescent observation,
F.N. 22, Simultaneous adjustment function with backport
Back port For IR observation (c mount adapter)Magnification Magnification changer Total N.A. Projectionchange lens magnification magnification magnification
* custom made 0.25x 5x 0.15 1/2 inchproduct 0.35x 7x 0.22 2/3 inch
(when combining 0.5x* 10x 0.4 2/3 inchwith XLUMPLFL20xW)
1x* 20x 0.95 2/3 inch2x* 40x 0.95 2/3 inch
4x 80x 0.95 2/3 inchIR-DIC observation Insert 775nm analyzer or 900nm analyzer into WI-DPMC
BX2WI SYSTEM DIAGRAM
U-TVCAC*7C-mount camera magnification change unit
U-DPTSMulti double port tube
U-CMDPTSC-mount adapter for U-DPTS
U-PMDPTSPM-mount adapter for U-DPTS
U-TR30-2Trinocular tube
U-TR30IRTrinocular tube for IR
U-ETR-4*1Erect image trinocular tube
U-ECA*3Magnification changer 2X
U-CA*3Magnification changer
U-DP*2 Dual port
U-DP1XCDual port 1X
U-FWOObservation filter wheel(ø32 filter)
BX-URA2*5Universal reflected lightilluminator
WI-UCDLong working distance universal condenser
WI-UCDSwing-out condenser
U-LDPW10HU-LDPW20HU-LDPW40HU-LDPW60H(used as optical element of LUMPLFL100XW)U-LDPXLU20HROptical element
WI-DICDLong working distanceDIC condenser
WI-OBCDLong working distanceoblique condenser
WI-FSHFixed stage adapter
WI-TP137Quarter wave tint plate
U-UCD8*88 positionuniversalcondenser
XLUMPLFL20XW20X super high N.A. objective
MPL5XUMPLFL10XWUMPLFL20XWLUMPLFL40XWLUMPLFL40XW/IR2LUMPLFL60XWLUMPLFL60XW/IR2LUMPLFL100XWObjectives
U-SLRESlide nosepiece
WI-SRE3Swing nosepiece
WI-NPANosepiece arm
BX-ARMArm for transmitted light
WI-SSNPSwing-slide nosepiece
WI-SNPXLUSingle positioin nosepiece
WI-RMSADRMS adapter
WI-DICTHRA2High resolutionDIC prismWI-DICTDIC prism for transmitted light
XLFLUOR2X/340XLFLUOR4X/340Fluorescence objectives for low magnification
XL-CAPWater immersion lens for XL objective
U-DP10U-DIC20U-DIC40U-DIC60U-DIC100Optical element
C-mount camera(2/3" or less)
* WHN10X WHN10X-H CROSSWHN10X
EyepieceU-CT30Centering eyepiece
* 35WHN10XEyepiece
******
IX-SVL2Mechanical stage
IX-SUSPStage plate
WI-STAD*8Stage adapter
Petri dish plate
U-SVL(R)B-4Mechanical stage
U-ANAnalyzer for reflected light
WI-ANIRIR analyzer for reflected light
Mirror unit
U-TLDDry top lens
U-SPTSingle port tube
PE4X, 5XPE lens
U-PMTVC2XIR*7U-PMTVC4XIR*7C mount camera port
U-PMTV1XCamera port
*1 Slight vignetting may occur in the periphery of the field of view in combination with an additional intermediate attachment. *2 Slight vignetting may occur in the periphery of the field of view in combination with *5 F.N. is 22 when fluorescence observation. *6 Use with fluorescent illuminator. *7 Acceptable camera adapters are U-TV1X-2, U-TVACA, U-PMTVC2XIR and U-PMTVC4X. *8 U-UCD8 cannot be used with WI-STAD.
BX-RFA*5BX fluorescence illuminator
U-TV0.63XCC mount camera port tube with 0.63x lens
U-TV0.5XC-3C mount camera port tube with 0.5x lens
U-TV0.35XC-2C mount camera port tube with 0.35x lens
13
WI-RSHReflected light shutter
U-TRU*2*4 Trinocularintermediate attachment
U-KPAIntermediate attachment for simple polarizing observation
U-ANTAnalyzer for transmitted light
WI-DPMC*6Double port magnificationchange unit(DPMC4X included)
DPMC0.25X0.25X adapter lens for WI-DPMC
DPMC0.35X0.35X adapter lens for WI-DPMC
DPMC-ANAnalyzer for WI-DPMCDPMC-ANIRIR analyzer for WI-DPMC
WI-ANTIRIR analyzer for transmitted light
BX-RFAA*5Motorized fluorescence illuminator
U-LH100XEAPO100W xenon apo lamphousing
U-LH100HGAPO100W mercury apo lamphousing
U-LH100HG100W mercury lamphousing
U-LH100IR100W halogen lamphousing for IR
U-LH100-3100W halogen lamphousing
U-RMTExtension cord
BX51WIFFixed stage upright microscope main bodyBX61WIFMotorized frame
45SCFHeat reflection filter
TH4-HSHand switch
TH4External light source
WI-XYSBridge stage
WI-XYMMicroscope mover
ø32 filter32POPolarizer32POIRIR polarizer
32BP775775nm band pass filter32IR900900nm filter
U-IFFHFocus handle interface
U-FHFocus handle
BX-UCBControl box
WI-ARMADArm height gaining Kit
For nosepiece arm (WI-NPA)
For frame
C-mount camera
U-RLGADLight guide adapter
FV5-FIRFiber
U-DP*2 Dual port
U-FWRReflected filter wheel
U-ULHADLamphouse adapter
U-LHADLamphouse adapter
BX61WIF
U-RFSSRectangular field stop
BX-RFSPOTPinhole unit
U-TV1X-2Direct image camera port
U-CMAD3C-mount adapter
U-BMADBayonetmount adapter
U-FMTF-mount adapter
U-TMADT-mount adapter
U-SMADSonymount adapter
ManipulatorMotorized unit
fluorescence illuminator. *3 Can be used with U-ETR and U-TR30IR. Field of view is limited when using more than two intermediate tubes. *4 Sub port can accept U-TV1X-2, and 2/3" or less CCD cameras.
14
This catalog is printed by enviromentally-friendly waterless printing system with soy ink.
Specifications are subject to change without any obligation on the part of the manufacturer.
OLYMPUS CORPORATION obtains ISO9001/ISO14001
ISO9001 CertificationOLYMPUS CORPORATION Micro-Imaging System Division
IISO14001 CertificationOLYMPUS CORPORATION Ina-Plant
ISO9001/ISO14001 CertificationOlympus Optical Technology Philippines Inc.
008
U K A SENVIRONMENTAL
MANAGEMENT
Certified ISO 14001 by
BX51WI dimensions (unit: mm)
Focu
s st
roke
503.
8 164
102
451
43
50 3
75
.5 48
3
430172.8
90190.5317.5
96408
567
Weight: approx. 19kg
12 Bottom hole for M4, depth 6
205
240
200
74
Bottom hole for M3, depth 6
12029
90 73
199186
149
Bottom hole for M4, depth 10
168.5
40
66.5
15 250
224
150
317.
5
1811.5
14 7.5
9.5
6-ø10
185
4.3
9.5
126
408482
11
Weight: approx. 21kg
40
317.5
430
567
483
408
187
503.
820
11 45
172.8
90
164
190.5
50*
Objective mounting position
29.1
150.
421
.5
368
4380
41
62°
* shows the stage's up and bottom position
Focu
s st
roke
8.2
17.8
6-ø10
250
11.1
9.5
7.514
11.5
11
482407.9
40 224
317.
5
126
150
66.5 168.5149
186199
12
29 120
74
Bottom hole for M3, depth 6
200
240
Bottom hole for M4, depth 6
15
7390
18
185
205
12
4.3
Bottom hole for M4, depth10
BX61WI dimensions (unit: mm)
BX51+WI-DPMC dimensions (unit: mm)
Focu
s S
trok
e
50 s
how
s th
e st
age'
s av
aila
ble
up a
nd
bott
om p
ositi
on.
567Weight approx. 25kg
482.
9408
201
1
50*
7.2
18.8
Objective mounting position
45.5
29.1
150.
421
.5
40
367.
9
43
96.4
127513
3.9
78.9
90.9
498.
5
76.2
229.7 219.5 90.8
Printed in Japan M1783E-0706B
Top Related