FingerprintsFingerprintsPart IIPart II
Types of FingerprintsTypes of FingerprintsVisible prints – made by fingers touching a surface
after the ridges have been in contact with a colored material such as blood, paint, grease, or ink.
Plastic prints – are rigid impressions left in a soft material such as putty, wax, soap, or dust.
Latent prints – or invisible prints are impressions caused by the transfer of body perspiration or oils present on finger ridges to the surface of an object.
Methods of Detecting Latent FingerprintsMethods of Detecting Latent Fingerprints
Dusting (black, gray, colored)
Magna Brush
Reflected Ultraviolet Imaging System (RUVIS)
Iodine Fuming
Ninhydrin
Physical Developer (Silver Nitrate)
Super Glue Fuming
Laser
DustingDustingWorks well on hard and nonabsorbent surfaces.
Gray, black, and colored powders adhere to oils and residues in the latent print.
The Magna Brush spreads a magnet sensitive powder over a surface with out touching the surface.
Reflected Ultraviolet Imaging SystemReflected Ultraviolet Imaging System
RUVIS uses ultraviolet light to locate latent fingerprints on most non-absorbent surfaces.
The oils in the print reflect the ultraviolet light to the viewer, differentiating the print from the
background.
The UV light is converted to visible light by an
image intensifier.
Iodine FumingIodine FumingWarmed iodine crystals undergo sublimation to form iodine
vapors. These iodine vapors adhere to organic molecules (oils and residues) in the print, thus making the print visible.
The print evidence must be recorded by photography since the iodine prints are not permanent.
It works on porous and
nonporous surfaces.
NinhydrinNinhydrinNinhydrin is another chemical used to process latent
fingerprints on porous substances. It binds to the amino acids in the print and forms a purple compound. Prints typically appear in 1-2 hours. However, weaker prints can requires 24-48 hours. Heat speeds up the process. The processed prints are permanent. Ninhydrin has been used to process prints that were 15 years old.
DFO has replaced ninhydrin in recent years.
Physical DeveloperPhysical DeveloperPhysical Developer is a third chemical mixture
used for visualizing latent prints. It is a silver nitrate-based liquid reagent.
This technique often is effective when other methods are not. It even works in porous surfaces that have been wet.
The silver nitrate reacts with the amino acids in the print forming a brown print.
Top Related