Thin-film, intumescent
fire protective paint for
wood, sheet rock, and
other interior substrates
Attractive water-based
architectural finish
rated for up to two
hours fire protection
Complies with all
building codes for use
in new construction,
historic restoration,
defective construction,
and many other
applications.
Fanueil Hall, Boston, MA
FP
Introducing Albi Clad FP - the Decorative Interior Finish withSuperior Fireproofing Protection
Our Albi Clad TF thin-film intumescent fireproofing for interior
structural steel has gained high marks from architects, construction
professionals and fire-safety officials all over the world. Now Albi Clad FP
gives you the same fireproofing protection - but can be applied to other
interior surfaces. Wood, wallboard, or virtually any kind of surface can now
be coated with Albi Clad FP to get an attractive interior finish with superior
fire resistant protection.
Albi Clad FP is the latest in a long line of innovative products fromAlbi - the first name in fireproofing materials for over five decades. Unlikeordinary fireproofing, Albi Clad FP is applied at minimum thickness for a smooth architectural finish. Light weight and ultra thin, Albi Clad FP givesyou long-term protection, outstanding hardness and incomparable durability.
Albi Clad FP is ideal for renovating historical buildings. Not only doesits attractive finish help maintain and retain the historic character of olderbuildings that make available tax credits, it provides uncompromising fire safetyas well.
Historic restorationprepared for primingbefore Albi Clad FPapplication
An attractive interior finish thatconforms to building codes andinsurance requirements for fireproofing
Maintains contour of thesubstrate, and preserves details
Architectural, decorative finish
Ideal for both new constructionand historic renovations
Complies with all VOC air qualitystandards
UL tested for resistance to highhumidity, aging, industrialatmosphere (CO2/SO2), and washing
ALBI CLAD FP ADVANTAGES
PROVEN PERFORMANCE
HISTORIC RENOVATIONS, RESTORATIONS OR PRESERVATION
Albi clad FP is applied directly from the shipping container using standard orairless spray equipment. Fire resistance specifications determine the thicknessof the coating. Contact Albi for specific application parameters.
ConstructionRough Cut 2x10Floor Joist Assembly
Rough Cut 2x10Floor Joist Assembly finished with tin ceiling panels
2x4 Wall Assembly with 5/8” Type X Gypsum on both sides
Fire Test Report #
WFCi Report # 04042 (A)
WFCi Report # 04042 (B)
WFCI Report # 04042 (D)
Film Thickness
40 mils
40 mils
60 mils
Fire Resistance Rating
1 Hour (ASTM E-119)
1 Hour (ASTM E-119)
1.5 Hours (ASTM E-119)
Albi Clad FP provides theultimate fire protection with
a pleasing architectural finish.
EASY TO APPLY
PERFORMANCE RESULTS FIRE TEST E-119
DEFECTIVE GYPSUM BOARD FIRE SEPERATION WALLCONSTRUCTION
GWB incorrectly attached
GWB installed horizontally
Non-staggered joints
Joints on both sides aligned
GWB applied to 1 side of demising wall only
ALBI CLAD APPLICATIONS
Fire Separation Walls and Ceilings
Nursing Homes
Warehouses
New Wood Construction
School Buildings
Condominiums and Apartments
Historic Renovations
Loft Conversions
Defective Construction
Architectural Tin Ceilings
), and washing
AGES
PHYSICAL PROPERTIES
Albi Clad FP Long Form Guide SpecificationAlbi Clad FP Field Application Manual
Albi Clad 800Exterior grade intumescentfireproofing, withstandssevere weathering and abuse
Albi DriCladLow-cost, uniformdensity mineral boardthat installs dry year-round
Albi Clad TFWater based, thin-filmintumescent fireproofing forexposed interior structuralsteel
Other Albi FP Literature
Also inquire about thesefireproofing productsfrom Albi.
Made in the USA
ALBI PROTECTIVE COATINGS
For more than fifty years, Albi fireproofing materials have demonstrated superiorperformance and reliability under a range of extreme environments worldwide. Theseproprietary formulations also meet global building codes and insurance requirements.Lightweight Albi materials provide long-term protection, outstanding durability,aesthetic properties and are completely free from asbestos.
Albi Protective Coatings, Division of StanChem, Inc.
401 Berlin Street, East Berlin, Connecticut 06023 U.S.A.
Tel: (860) 828-0571 Fax: (860) 828-3297
www.albi.com [email protected]
PROPERTY
Dry Applied Density
Hardness
Compressive Strength
Cohesive/Adhesion Strength
Abrasion Resistance
Impact Resistance
Weight per Gallon
% Solids by weight
Flame Spread
Smoke Developed
VALUE
85 PCF
40-45
300 psi
190 psi (cohesive failure)
.3 grams loss
85 in/lbs.
11.5 ± 0.20 lbs./gals
72% ± 2.0%
2 - Class A
5 - Class A
TEST METHOD
ASTM D2240
ASTM D695
ASTM D4541
ASTM D4060
ASTM D2794
ASTM E84
ASTM E84
Top Related