Bin picking of cylindrical parts Car body sealing
Medium Payload Handling Intelligent Robot
Application system
FEATURESFANUC Robot M-710+C is the medium payload handling robot whose wrist payload is 12kg - 70kg .
● Seven models are available to meet a variety of application.
- FANUC Robot M-710+C/45M, /50, /70Wide motion envelop and enough wrist load capacity are enough to handle a large panel.M-710+C/45M : Payload capacity 45kgM-710+C/50 : Payload capacity 50kgM-710+C/70 : Payload capacity 70kg
- FANUC Robot M-710+C/50SThis model has a compact body that is suitable in narrow area operation. (Payload capacity 50kg)
- FANUC Robot M-710+C/12L, /20L Long reach and high motion performance are suitable for various applications, such as handling, sealing and arc welding. M-710+C/12L : Payload capacity 12kg(Hollow wrist)M-710+C/20L : Payload capacity 20kg
- FANUC Robot M-710+C/50HThis model is 5 axes type robot that corresponds to the high speed transferring. The ceiling mount realizes compact handling system.(Payload capacity 50kg)
● The full cover realizes IP67-equivalent resistance to environmental conditions (dust and dips). It’s reliable in various applications, such as load / unload for machined parts, de-burring and die cast loading.
M-710+COperating space
RM-710+C(E)-08, 2014.8, Printed in Japan2005
M-710+C/50H
TypeControlled axes Reach Installation
Item
Specifications
Motion range(Maximum speed)(Note 1)
Note 1) In case of short distance motion, the axis speed may not reach the maximum value stated.Note 2) Max. load capacity at J3 casing is limited by payload at wrist.Note 3) Without controller.
J1 axis rotation
J2 axis rotation
J3 axis rotation
J4 axis wrist swingJ5 axis wrist rotation
J4 axisJ5 axisJ4 axisJ5 axis
Max. load capacity at wristMax. load capacity at J3 casing (Note 2)
Drive methodRepeatabilityMass (Note 3)
Ambient temperature : 0~45℃ Ambient humidity : Normally 75%RH or less (No dew nor frost allowed) Short term 95%RH or less (within one month) Vibration acceleration : 4.9m/s2 (0.5G) or less
Installation environment
Allowable load moment at wristAllowable load inertia at wrist
+180deg 0deg
-180deg
150 970 175
2003
234273
R 388
R 2003
1703
550
435
535
565
870
160
1033
2418
1042
1500
J4-axisrotation center
Motion range ofJ4-axis rotationcenter
234°(175°/s)4.08 rad (3.05 rad/s)720°(720°/s)
12.57 rad (12.57 rad/s)
225°(175°/s)3.93 rad (3.05 rad/s)
⦆360°(175°/s)6.28 rad (3.05 rad/s)
440°(175°/s)7.68 rad (3.05 rad/s)
Articulated Type5 axes (J1, J2, J3, J4, J5)
Floor, Upside-down
SpecificationM-710+C/50H
2003mm
± 0.15 mm
2.5 kg·m2 25.5 kgf·cm·s26.3 kg·m2 64.3 kgf·cm·s2
Electric servo drive by AC servo motor
540 kg
68 N·m 6.9 kgf·m150 N·m 15.3 kgf·m
50kg15kg
●All specifications are subject to change without notice.●No part of this catalog may be reproduced in any form.●The products in this catalog are controlled based on Japan's “Foreign Exchange and Foreign Trade Law". The export from Japan may be subject to an export license by the government of Japan. Further, re-export to another country may be subject to the license of the government of the country from where the product is re-exported. Furthermore, the product may also be controlled by re-export regulations of the United States government. Should you wish to export or re-export these products, please contact FANUC for advice.
●Headquarters Oshino-mura, Yamanashi 401-0597, Japan Phone: 81-555-84-5555 Fax: 81-555-84-5512 http://www.fanuc.co.jp
●Overseas Affiliated Companies FANUC America Corporation 3900 West Hamlin Road, Rochester Hills, MI 48309-3253, U.S.A. Phone: 1-248-377-7000 Fax: 1-248-377-7477 FANUC Europe Corporation, S.A. Zone Industrielle, L-6468 Echternach, Grand-Duché de Luxembourg Phone: 352-727777-1 Fax: 352-727777-403 SHANGHAI-FANUC Robotics CO., LTD. No. 1500 Fulian Road, Baoshan Area, Shanghai, China Phone: 86-21-5032-7700 Fax: 86-21-5032-7711 KOREA FANUC CORPORATION 101, Wanam-ro(st), Seongsan-gu, Changwon-si, Gyeongsangnam-do, 641-290 Republic of Korea Phone: 82-55-278-1200 Fax: 82-55-284-9826 TAIWAN FANUC CORPORATION No.10, 16th Road, Taichung Industrial Park, Taichung, Taiwan Phone: 886-4-2359-0522 Fax: 886-4-2359-0771 FANUC INDIA PRIVATE LIMITED 41-A, Electronics City, Bangalore, 560 100, India Phone: 91-80-2852-0057 Fax: 91-80-2852-0051 FANUC SINGAPORE PTE. LTD. No.1 Teban Gardens Crescent, Singapore 608919, Singapore Phone: 65-6567-8566 Fax: 65-6566-5937 FANUC THAI LIMITED 1301 Pattanakarn Road, Kwaeng Suanluang, Khet Suanluang, Bangkok 10250 Thailand Phone: 66-2-714-6111 Fax: 66-2-714-6120 FANUC MECHATRONICS (MALAYSIA) SDN. BHD. No.32, Jalan Pengacara U1/48, Temasya Industrial Park, Section U1, Glenmarie, 40150 Shah Alam, Selangor Darul Ehsan, Malaysia Phone: 60-3-7628-0110 Fax: 60-3-7628-0220 PT. FANUC INDONESIA JL. Boulevard Bukit Gading Raya Blok R, Jakarta 14240 Indonesia Phone: 62-21-4584-7285 Fax: 62-21-4584-7288 FANUC OCEANIA PTY. LIMITED 10 Healey Circuit, Huntingwood, NSW 2148, Australia Phone: 61-2-8822-4600 Fax: 61-2-8822-4666 FANUC SOUTH AFRICA (PROPRIETARY) LIMITED 17 Loper Ave. Aeroport Industrial Ests, Spartan Ext.2 P.O.Box 219, Isando 1600, Republic of South Africa Phone: 27-11-392-3610 Fax: 27-11-392-3615
TypeControlled axesReachInstallation (Note 1)
Item
Specifications
Motion range(Maximum speed)(Note 2)
Note 1) In case of the angle mounting, the J1 and J2 axis motion range are restricted.Note 2) In case of short distance motion, the axis speed may not reach the maximum value stated.Note 3) Max. load capacity at J3 casing is limited by payload at wrist.Note 4) Without controller.
J1 axis rotation
J2 axis rotation
J3 axis rotation
J4 axisJ5 axisJ6 axisJ4 axisJ5 axisJ6 axis
225° (120°/s)3.93 rad (2.09 rad/s)440° (120°/s)
7.68 rad (2.09 rad/s)720° (225°/s)
12.57 rad (3.93 rad/s)250° (225°/s)
4.36 rad (3.93 rad/s)720° (225°/s)
12.57 rad (3.93 rad/s)
720° (250°/s)12.57 rad (4.36 rad/s)250° (250°/s)
4.36 rad (4.36 rad/s)720° (355°/s)
12.57 rad (6.20 rad/s)
360° (160°/s)6.28 rad (2.79 rad/s)
225° (175°/s)3.93 rad (3.05 rad/s)
360° (175°/s)6.28 rad (3.05 rad/s)
440° (175°/s)7.68 rad (3.05 rad/s)
M-710+C/70Articulated Type
6 axes(J1, J2, J3, J4, J5, J6)
Floor, Upside-down, Angle mount
SpecificationM-710+C/50
2050mm2606mm
147 N·m 15 kgf·m294 N·m 30 kgf·m294 N·m 30 kgf·m
70kg
± 0.07 mm
11 kg·m2 112 kgf·cm·s220 kg·m2 204 kgf·cm·s228 kg·m2 286 kgf·cm·s228 kg·m2 286 kgf·cm·s2
Electric servo drive by AC servo motor
560 kg± 0.1 mm570 kg
206 N·m 21 kgf·m127 N·m 13 kgf·m
206 N·m 21 kgf·m
50kg
800° (250°/s)13.96 rad (4.36 rad/s)250° (250°/s)
4.36 rad (4.36 rad/s)800° (360°/s)
13.96 rad (6.28 rad/s)
225° (180°/s)3.93 rad (3.14 rad/s)
360° (180°/s)6.28 rad (3.14 rad/s)
440° (180°/s)7.68 rad (3.14 rad/s)
M-710+C/45M
45kgMax. load capacity at wristMax. Load capacity at J3 casing (Note 3)
Drive methodRepeatabilityMass (Note 4)
Ambient temperature : 0~45℃Ambient humidity : Normally 75%RH or less (No dew nor frost allowed)Short term 95%RH or less (within one month)Vibration acceleration : 4.9m/s2 (0.5G) or less
Installation environment
Allowable load moment at wrist
Allowable load inertia at wrist
15kg
TypeControlled axes Reach Installation (Note 1)
Item
Specifications
Motion range(Maximum speed)(Note 2)
Note 1) In case of the angle mounting, the J1 and J2 axis motion range are restricted.Note 2) In case of short distance motion, the axis speed may not reach the maximum value stated.Note 3) Max. load capacity at J3 casing is limited by payload at wrist.Note 4) Without controller.
J1 axis rotation
J2 axis rotation
J3 axis rotation
J4 axisJ5 axisJ6 axisJ4 axisJ5 axisJ6 axis
⦆360°(175°/s)6.28 rad (3.05 rad/s)
720°(250°/s)12.57 rad (4.36 rad/s)
250°(250°/s)4.36 rad (4.36 rad/s)720°(355°/s)
12.57 rad (6.20 rad/s)
169°(175°/s)2.95 rad (3.05 rad/s)376°(175°/s)
6.56 rad (3.05 rad/s)
M-710+C/50SArticulated Type
6 axes (J1, J2, J3, J4, J5, J6)
Floor, Upside-down, Angle mount
Specification
1359mm
545 kg± 0.07 mm
11 kg·m2 112 kgf·cm·s228 kg·m2 286 kgf·cm·s228 kg·m2 286 kgf·cm·s2
Electric servo drive by AC servo motor
206 N·m 21 kgf·m127 N·m 13 kgf·m
206 N·m 21 kgf·m
50kgMax. load capacity at wristMax. load capacity at J3 casing (Note 3)
Drive methodRepeatabilityMass (Note 4)
Ambient temperature : 0~45℃ Ambient humidity : Normally 75%RH or less (No dew nor frost allowed)Short term 95%RH or less (within one month)Vibration acceleration : 4.9m/s2 (0.5G) or less
Installation environment
Allowable load moment at wrist
Allowable load inertia at wrist
15kg
J5-axisrotation center
Motion range ofJ5-axis rotationcenter
565
150 585 175
1359
600
170
962
269
1774
878
754
R 1359
550
535
433
219 234
+180deg-180deg
0deg
R 368
120
Operating space (M-710+C/45M, /50, /70 ) Operating space (M-710+C/50S) Operating space (M-710+C/12L, /20L )
M-710+C/45M, /50, /70, /50S, /12L, /20L
TypeControlled axesReachInstallation (Note 1)
Item
Specifications
Motion range(Maximum speed)(Note 2)
Note 1) In case of the angle mounting, the J1 and J2 axis motion range are restricted.Note 2) In case of short distance motion, the axis speed doesn't reach maximum one.Note 3) Max. load capacity at J3 casing is limited by payload at wrist.Note 4) Without controller.
J1 axis rotation
J2 axis rotation
J3 axis rotation
J4 axisJ5 axisJ6 axisJ4 axisJ5 axisJ6 axis
360° (175°/s)6.28 rad (3.05 rad/s)
400° (350°/s)6.98 rad (6.11 rad/s)280° (360°/s)
4.89 rad (6.28 rad/s)900° (600°/s)
15.71 rad (10.47 rad/s)
225° (175°/s)3.93 rad (3.05 rad/s)432° (180°/s)
7.54 rad (3.14 rad/s)
M-710+C/12L M-710+C/20LArticulated Type
6 axes(J1, J2, J3, J4, J5, J6)
Floor, Upside-down, Angle mount
Specification
3110mm3123mm
540 kg± 0.15 mm
0.25 kg·m2 2.5 kgf·cm·s20.88 kg·m2 9.0 kgf·cm·s20.88 kg·m2 9.0 kgf·cm·s2
Electric servo drive by AC servo motor
39.2 N·m 4.0 kgf·m19.6 N·m 2.0 kgf·m
39.2 N·m 4.0 kgf·m
20kg
360° (180°/s)6.28 rad (3.14 rad/s)
400° (400°/s)6.98 rad (6.98 rad/s)380° (430°/s)
6.63 rad (7.50 rad/s)720° (630°/s)
12.57 rad (11.0 rad/s)
225° (180°/s)3.93 rad (3.14 rad/s)434° (180°/s)
7.57 rad (3.14 rad/s)
0.17 kg·m2 1.7 kgf·cm·s20.65 kg·m2 6.6 kgf·cm·s20.65 kg·m2 6.6 kgf·cm·s2
22.0 N·m 2.24 kgf·m9.8 N·m 1.0 kgf·m
22.0 N·m 2.24 kgf·m
12kgMax. load capacity at wristMax. Load capacity at J3 casing (Note 3)
Drive methodRepeatabilityMass (Note 4)
Ambient temperature : 0~45℃Ambient humidity : Normally 75%RH or less (No dew nor frost allowed)Short term 95%RH or less (within one month)Vibration acceleration : 4.9m/s2 (0.5G) or less
Installation environment
Allowable load moment at wrist
Allowable load inertia at wrist
24kg
M-710iC/45M : 1150M-710iC/50, /70 : 870
M-710iC/45M
M-710iC/50, /70
J5-axisrotation center
Motion rangeof J5-axisrotation enter
M-710iC/45M : 1295M-710iC/50, /70 : 1016
170
150
20501750
R 2050R 368
550
175
565
535
2465
1080
219 234120
433
0deg+180deg
-180deg
3021
1554
2306 2606
R 2606
1354
1051
2062
1549
+180deg
-180deg
0deg
M-710iC/12L : 255M-710iC/20L : 190
M-710iC/12L : 3538M-710iC/20L : 3525
M-710iC/12L : 2071M-710iC/20L : 2058
M-710iC/12L : 216M-710iC/20L : 212
M-710iC/12L : 533M-710iC/20L : 451
J5-axisrotation center
Motion rangeof J5-axisrotationcenter
M-710iC/12L : 1445M-710iC/20L : 1409
M-710iC/12L : 2207M-710iC/20L : 2194
234
565
1150
150M-710iC/12L : 1805 M-710iC/20L : 1800 100
M-710iC/12L : 2823M-710iC/20L : 2810
M-710iC/12L : 3123 M-710iC/20L : 3110
550
R 368
M-710iC/12L : R 3123M-710iC/20L : R 3110
120
535
2 3
J4 axis wrist rotationJ5 axis wrist swingJ6 axis wrist rotation
J4 axis wrist rotationJ5 axis wrist swingJ6 axis wrist rotation
J4 axis wrist rotationJ5 axis wrist swingJ6 axis wrist rotation
TypeControlled axesReachInstallation (Note 1)
Item
Specifications
Motion range(Maximum speed)(Note 2)
Note 1) In case of the angle mounting, the J1 and J2 axis motion range are restricted.Note 2) In case of short distance motion, the axis speed may not reach the maximum value stated.Note 3) Max. load capacity at J3 casing is limited by payload at wrist.Note 4) Without controller.
J1 axis rotation
J2 axis rotation
J3 axis rotation
J4 axisJ5 axisJ6 axisJ4 axisJ5 axisJ6 axis
225° (120°/s)3.93 rad (2.09 rad/s)440° (120°/s)
7.68 rad (2.09 rad/s)720° (225°/s)
12.57 rad (3.93 rad/s)250° (225°/s)
4.36 rad (3.93 rad/s)720° (225°/s)
12.57 rad (3.93 rad/s)
720° (250°/s)12.57 rad (4.36 rad/s)250° (250°/s)
4.36 rad (4.36 rad/s)720° (355°/s)
12.57 rad (6.20 rad/s)
360° (160°/s)6.28 rad (2.79 rad/s)
225° (175°/s)3.93 rad (3.05 rad/s)
360° (175°/s)6.28 rad (3.05 rad/s)
440° (175°/s)7.68 rad (3.05 rad/s)
M-710+C/70Articulated Type
6 axes(J1, J2, J3, J4, J5, J6)
Floor, Upside-down, Angle mount
SpecificationM-710+C/50
2050mm2606mm
147 N·m 15 kgf·m294 N·m 30 kgf·m294 N·m 30 kgf·m
70kg
± 0.07 mm
11 kg·m2 112 kgf·cm·s220 kg·m2 204 kgf·cm·s228 kg·m2 286 kgf·cm·s228 kg·m2 286 kgf·cm·s2
Electric servo drive by AC servo motor
560 kg± 0.1 mm570 kg
206 N·m 21 kgf·m127 N·m 13 kgf·m
206 N·m 21 kgf·m
50kg
800° (250°/s)13.96 rad (4.36 rad/s)250° (250°/s)
4.36 rad (4.36 rad/s)800° (360°/s)
13.96 rad (6.28 rad/s)
225° (180°/s)3.93 rad (3.14 rad/s)
360° (180°/s)6.28 rad (3.14 rad/s)
440° (180°/s)7.68 rad (3.14 rad/s)
M-710+C/45M
45kgMax. load capacity at wristMax. Load capacity at J3 casing (Note 3)
Drive methodRepeatabilityMass (Note 4)
Ambient temperature : 0~45℃Ambient humidity : Normally 75%RH or less (No dew nor frost allowed)Short term 95%RH or less (within one month)Vibration acceleration : 4.9m/s2 (0.5G) or less
Installation environment
Allowable load moment at wrist
Allowable load inertia at wrist
15kg
TypeControlled axes Reach Installation (Note 1)
Item
Specifications
Motion range(Maximum speed)(Note 2)
Note 1) In case of the angle mounting, the J1 and J2 axis motion range are restricted.Note 2) In case of short distance motion, the axis speed may not reach the maximum value stated.Note 3) Max. load capacity at J3 casing is limited by payload at wrist.Note 4) Without controller.
J1 axis rotation
J2 axis rotation
J3 axis rotation
J4 axisJ5 axisJ6 axisJ4 axisJ5 axisJ6 axis
⦆360°(175°/s)6.28 rad (3.05 rad/s)
720°(250°/s)12.57 rad (4.36 rad/s)
250°(250°/s)4.36 rad (4.36 rad/s)720°(355°/s)
12.57 rad (6.20 rad/s)
169°(175°/s)2.95 rad (3.05 rad/s)376°(175°/s)
6.56 rad (3.05 rad/s)
M-710+C/50SArticulated Type
6 axes (J1, J2, J3, J4, J5, J6)
Floor, Upside-down, Angle mount
Specification
1359mm
545 kg± 0.07 mm
11 kg·m2 112 kgf·cm·s228 kg·m2 286 kgf·cm·s228 kg·m2 286 kgf·cm·s2
Electric servo drive by AC servo motor
206 N·m 21 kgf·m127 N·m 13 kgf·m
206 N·m 21 kgf·m
50kgMax. load capacity at wristMax. load capacity at J3 casing (Note 3)
Drive methodRepeatabilityMass (Note 4)
Ambient temperature : 0~45℃ Ambient humidity : Normally 75%RH or less (No dew nor frost allowed)Short term 95%RH or less (within one month)Vibration acceleration : 4.9m/s2 (0.5G) or less
Installation environment
Allowable load moment at wrist
Allowable load inertia at wrist
15kg
J5-axisrotation center
Motion range ofJ5-axis rotationcenter
565
150 585 175
1359
600
170
962
269
1774
878
754
R 1359
550
535
433
219 234
+180deg-180deg
0deg
R 368
120
Operating space (M-710+C/45M, /50, /70 ) Operating space (M-710+C/50S) Operating space (M-710+C/12L, /20L )
M-710+C/45M, /50, /70, /50S, /12L, /20L
TypeControlled axesReachInstallation (Note 1)
Item
Specifications
Motion range(Maximum speed)(Note 2)
Note 1) In case of the angle mounting, the J1 and J2 axis motion range are restricted.Note 2) In case of short distance motion, the axis speed doesn't reach maximum one.Note 3) Max. load capacity at J3 casing is limited by payload at wrist.Note 4) Without controller.
J1 axis rotation
J2 axis rotation
J3 axis rotation
J4 axisJ5 axisJ6 axisJ4 axisJ5 axisJ6 axis
360° (175°/s)6.28 rad (3.05 rad/s)
400° (350°/s)6.98 rad (6.11 rad/s)280° (360°/s)
4.89 rad (6.28 rad/s)900° (600°/s)
15.71 rad (10.47 rad/s)
225° (175°/s)3.93 rad (3.05 rad/s)432° (180°/s)
7.54 rad (3.14 rad/s)
M-710+C/12L M-710+C/20LArticulated Type
6 axes(J1, J2, J3, J4, J5, J6)
Floor, Upside-down, Angle mount
Specification
3110mm3123mm
540 kg± 0.15 mm
0.25 kg·m2 2.5 kgf·cm·s20.88 kg·m2 9.0 kgf·cm·s20.88 kg·m2 9.0 kgf·cm·s2
Electric servo drive by AC servo motor
39.2 N·m 4.0 kgf·m19.6 N·m 2.0 kgf·m
39.2 N·m 4.0 kgf·m
20kg
360° (180°/s)6.28 rad (3.14 rad/s)
400° (400°/s)6.98 rad (6.98 rad/s)380° (430°/s)
6.63 rad (7.50 rad/s)720° (630°/s)
12.57 rad (11.0 rad/s)
225° (180°/s)3.93 rad (3.14 rad/s)434° (180°/s)
7.57 rad (3.14 rad/s)
0.17 kg·m2 1.7 kgf·cm·s20.65 kg·m2 6.6 kgf·cm·s20.65 kg·m2 6.6 kgf·cm·s2
22.0 N·m 2.24 kgf·m9.8 N·m 1.0 kgf·m
22.0 N·m 2.24 kgf·m
12kgMax. load capacity at wristMax. Load capacity at J3 casing (Note 3)
Drive methodRepeatabilityMass (Note 4)
Ambient temperature : 0~45℃Ambient humidity : Normally 75%RH or less (No dew nor frost allowed)Short term 95%RH or less (within one month)Vibration acceleration : 4.9m/s2 (0.5G) or less
Installation environment
Allowable load moment at wrist
Allowable load inertia at wrist
24kg
M-710iC/45M : 1150M-710iC/50, /70 : 870
M-710iC/45M
M-710iC/50, /70
J5-axisrotation center
Motion rangeof J5-axisrotation enter
M-710iC/45M : 1295M-710iC/50, /70 : 1016
170
150
20501750
R 2050R 368
550
175
565
535
2465
1080
219 234120
433
0deg+180deg
-180deg
3021
1554
2306 2606
R 2606
1354
1051
2062
1549
+180deg
-180deg
0deg
M-710iC/12L : 255M-710iC/20L : 190
M-710iC/12L : 3538M-710iC/20L : 3525
M-710iC/12L : 2071M-710iC/20L : 2058
M-710iC/12L : 216M-710iC/20L : 212
M-710iC/12L : 533M-710iC/20L : 451
J5-axisrotation center
Motion rangeof J5-axisrotationcenter
M-710iC/12L : 1445M-710iC/20L : 1409
M-710iC/12L : 2207M-710iC/20L : 2194
234
565
1150
150M-710iC/12L : 1805 M-710iC/20L : 1800 100
M-710iC/12L : 2823M-710iC/20L : 2810
M-710iC/12L : 3123 M-710iC/20L : 3110
550
R 368
M-710iC/12L : R 3123M-710iC/20L : R 3110
120
535
2 3
J4 axis wrist rotationJ5 axis wrist swingJ6 axis wrist rotation
J4 axis wrist rotationJ5 axis wrist swingJ6 axis wrist rotation
J4 axis wrist rotationJ5 axis wrist swingJ6 axis wrist rotation
Bin picking of cylindrical parts Car body sealing
Medium Payload Handling Intelligent Robot
Application system
FEATURESFANUC Robot M-710+C is the medium payload handling robot whose wrist payload is 12kg - 70kg .
● Seven models are available to meet a variety of application.
- FANUC Robot M-710+C/45M, /50, /70Wide motion envelop and enough wrist load capacity are enough to handle a large panel.M-710+C/45M : Payload capacity 45kgM-710+C/50 : Payload capacity 50kgM-710+C/70 : Payload capacity 70kg
- FANUC Robot M-710+C/50SThis model has a compact body that is suitable in narrow area operation. (Payload capacity 50kg)
- FANUC Robot M-710+C/12L, /20L Long reach and high motion performance are suitable for various applications, such as handling, sealing and arc welding. M-710+C/12L : Payload capacity 12kg(Hollow wrist)M-710+C/20L : Payload capacity 20kg
- FANUC Robot M-710+C/50HThis model is 5 axes type robot that corresponds to the high speed transferring. The ceiling mount realizes compact handling system.(Payload capacity 50kg)
● The full cover realizes IP67-equivalent resistance to environmental conditions (dust and dips). It’s reliable in various applications, such as load / unload for machined parts, de-burring and die cast loading.
M-710+COperating space
RM-710+C(E)-08, 2014.8, Printed in Japan2005
M-710+C/50H
TypeControlled axes Reach Installation
Item
Specifications
Motion range(Maximum speed)(Note 1)
Note 1) In case of short distance motion, the axis speed may not reach the maximum value stated.Note 2) Max. load capacity at J3 casing is limited by payload at wrist.Note 3) Without controller.
J1 axis rotation
J2 axis rotation
J3 axis rotation
J4 axis wrist swingJ5 axis wrist rotation
J4 axisJ5 axisJ4 axisJ5 axis
Max. load capacity at wristMax. load capacity at J3 casing (Note 2)
Drive methodRepeatabilityMass (Note 3)
Ambient temperature : 0~45℃ Ambient humidity : Normally 75%RH or less (No dew nor frost allowed) Short term 95%RH or less (within one month) Vibration acceleration : 4.9m/s2 (0.5G) or less
Installation environment
Allowable load moment at wristAllowable load inertia at wrist
+180deg 0deg
-180deg
150 970 175
2003
234273
R 388
R 2003
1703
550
435
535
565
870
160
1033
2418
1042
1500
J4-axisrotation center
Motion range ofJ4-axis rotationcenter
234°(175°/s)4.08 rad (3.05 rad/s)720°(720°/s)
12.57 rad (12.57 rad/s)
225°(175°/s)3.93 rad (3.05 rad/s)
⦆360°(175°/s)6.28 rad (3.05 rad/s)
440°(175°/s)7.68 rad (3.05 rad/s)
Articulated Type5 axes (J1, J2, J3, J4, J5)
Floor, Upside-down
SpecificationM-710+C/50H
2003mm
± 0.15 mm
2.5 kg·m2 25.5 kgf·cm·s26.3 kg·m2 64.3 kgf·cm·s2
Electric servo drive by AC servo motor
540 kg
68 N·m 6.9 kgf·m150 N·m 15.3 kgf·m
50kg15kg
●All specifications are subject to change without notice.●No part of this catalog may be reproduced in any form.●The products in this catalog are controlled based on Japan's “Foreign Exchange and Foreign Trade Law". The export from Japan may be subject to an export license by the government of Japan. Further, re-export to another country may be subject to the license of the government of the country from where the product is re-exported. Furthermore, the product may also be controlled by re-export regulations of the United States government. Should you wish to export or re-export these products, please contact FANUC for advice.
●Headquarters Oshino-mura, Yamanashi 401-0597, Japan Phone: 81-555-84-5555 Fax: 81-555-84-5512 http://www.fanuc.co.jp
●Overseas Affiliated Companies FANUC America Corporation 3900 West Hamlin Road, Rochester Hills, MI 48309-3253, U.S.A. Phone: 1-248-377-7000 Fax: 1-248-377-7477 FANUC Europe Corporation, S.A. Zone Industrielle, L-6468 Echternach, Grand-Duché de Luxembourg Phone: 352-727777-1 Fax: 352-727777-403 SHANGHAI-FANUC Robotics CO., LTD. No. 1500 Fulian Road, Baoshan Area, Shanghai, China Phone: 86-21-5032-7700 Fax: 86-21-5032-7711 KOREA FANUC CORPORATION 101, Wanam-ro(st), Seongsan-gu, Changwon-si, Gyeongsangnam-do, 641-290 Republic of Korea Phone: 82-55-278-1200 Fax: 82-55-284-9826 TAIWAN FANUC CORPORATION No.10, 16th Road, Taichung Industrial Park, Taichung, Taiwan Phone: 886-4-2359-0522 Fax: 886-4-2359-0771 FANUC INDIA PRIVATE LIMITED 41-A, Electronics City, Bangalore, 560 100, India Phone: 91-80-2852-0057 Fax: 91-80-2852-0051 FANUC SINGAPORE PTE. LTD. No.1 Teban Gardens Crescent, Singapore 608919, Singapore Phone: 65-6567-8566 Fax: 65-6566-5937 FANUC THAI LIMITED 1301 Pattanakarn Road, Kwaeng Suanluang, Khet Suanluang, Bangkok 10250 Thailand Phone: 66-2-714-6111 Fax: 66-2-714-6120 FANUC MECHATRONICS (MALAYSIA) SDN. BHD. No.32, Jalan Pengacara U1/48, Temasya Industrial Park, Section U1, Glenmarie, 40150 Shah Alam, Selangor Darul Ehsan, Malaysia Phone: 60-3-7628-0110 Fax: 60-3-7628-0220 PT. FANUC INDONESIA JL. Boulevard Bukit Gading Raya Blok R, Jakarta 14240 Indonesia Phone: 62-21-4584-7285 Fax: 62-21-4584-7288 FANUC OCEANIA PTY. LIMITED 10 Healey Circuit, Huntingwood, NSW 2148, Australia Phone: 61-2-8822-4600 Fax: 61-2-8822-4666 FANUC SOUTH AFRICA (PROPRIETARY) LIMITED 17 Loper Ave. Aeroport Industrial Ests, Spartan Ext.2 P.O.Box 219, Isando 1600, Republic of South Africa Phone: 27-11-392-3610 Fax: 27-11-392-3615
Top Related