Motors | Automation | Energy | Transmission & Distribution | Coatings
Motors, Energy, Automation
This is WEG
USA506 - 05/12
Productsg W22 Three-phase from 18.5 to 355 kW (European Market)g WMagnet Three-phase from 11 to 160 kWg WELL Three-phase from 0.75 to 370 kWg W21 Standard Efficiency Three-phase from 0.12 to 370 kWg W21 Top Premium Efficiency Three-phase from 0.12 to 370 kWg Roller Table - Three-phase Frames 132M, 160L, 180M, 200L and 225S/Mg Rolled Steel Three-phase from 0.75 to 15 kWg Mining Three-phase from 0.37 to 370 kWg Wash Three-phase from 0.75 to 37 kWg Multi Speed - Dahalnder Two Speed Independent Winding - Two or Three Speedg W21 Aluminum Three-phase from 0.12 to 15 kWg ODP Three-phase from 0.75 to 220 kWg Brake Motor Three-phase from 0.75 to 370 kWg Three-phase motors for Gearbox from 0.12 to 315 kWg Saw Arbor Three-phase from 2.2 to 7.5 kWg P-Base Three-phase from 0.75 to 110 kWg Smoke Extraction Three-phase from 0.12 to 315 kWg Compressor Duty Single-phase from 0.37 to 3.7 kWg Single-phase from 0.12 to 9.2 kWg Fuel Pump - Single-phase from 0.25 to 0.75 kW Three-phase from 0.37 to 0.75 kWg Fractional - Single-phase from 0.09 to 2.2 kW Three-phase from 0.18 to 2.2 kW g Fractional Jet Pump - Single-phase from 0.09 to 2.2 kW Three-phase - from 0.25 to 2.2 kWg Explosion Proof Three-phase from 0.37 to 370 kWg Explosion Proof with Brake Three-phase from 0.25 to 75 kWg Explosion Proof Medium Voltage from 160 to 900 kWg WDIP Motors for 21 Zone Three-phase from 0.12 to 315 kWg Non-Sparking (Ex n) Three-phase from 0.37 to 330 kWg Increased Safety (Ex e) Three-phase from 0.18 to 100 kW Appliance Motorsg HVACg Washing Machineg Air Conditioning
Motors
Products g Hydrogenerators - Outputs up to 25 MVA Voltages up to 13.800 kVg Turbogenerators - Outputs up to 62.5 MVA Voltages up to 13.800 kVg Synchronous Generators (GTA) Outputs from 12.5 to 4200 kVA Voltages from 220 to 13,800 Vg Low and High Voltage Induction Motors Outputs up to 50,000 kW Voltages from 220 to 13,800 Vg Synchronous Motors Outputs up to 50,000 kW Voltages from 220 to 13,800 Vg DC Motors - Outputs up to 10,000 kW Voltages from 110 to 800 Vdcg Power Transformers with rates up to 300 MVA and Voltages up to 550 kVg Furnace and Rectifier Transformers rates up
to 150 MVAg Dry Type Transformers from 300 to 15,000 kVAg Industrial Transformers from 500 to 5,000 kVAg Distribution Transformers from 15 to 300 kVAg Power Substations: Stationary and Mobile
Service g Repair and up-rate service for Power Transformers up to 300 MVA and voltages up to 550 kV at the factory or in the field.g Repair and up-rate service in Medium and Large size Electric Rotating Machines (Induction Motors, LV/HV Generators, DC Motors).
Energy
Automation
Products g Low Voltage VFDs from 0.18 to 1100 kWg MV Frequency Drives from 400 up to 3300 kWg Soft-Starters from 0.5 to 1950 kWg AC/DC Drives up to 884 kWg AC Servomotors (1.6 to 50Nm) and Servodrivesg LV Distribution Panelsg MV Distribution Panelsg IES - Integrated Electrical Systemsg Programmable Logic Controllersg Contactors and Thermal Overload Relaysg Motor Protective Circuit-Breakersg Moulded Case Circuit-Breakersg Miniature Circuit-Breakers & Residual Current
Circuit-Breakersg Air Circuit-Breakersg D and NH Fusesg Electronic Relaysg Enclosed Startersg Pushbuttons and Signallingg Power Factor Correction Capacitorsg Motor-run and Lighting Capacitors
Worldwide companies that have approved WEG
Any time | Any place
Steel Industry, Mining, Oil and Gas, Energy, Marine, Sugar and Alcohol, Pulp and Paper, Cement, Agriculture
Energy, Motors and Automation any time, any place. The complete solution that industry needs at the speed the market demands.
From small systems to large projects, WEG takes a proactive and detailed approach to solving problems while building open and honest relationships with customers.
Covering all market segments with factories, branches and technical service located around the world, WEG is present in one way or another in everyone’s day-to-day life.
Taking responsibility for the preservation of our planet and people, WEG continually invests in the technology necessary to develop more efficient and environmentally friendly electrical solutions.
Any time, any place. Your challenge is ours. This is WEG.
Worldwide companies that have approved WEG
Energy, Motors and Automation any time, any place. The complete solution that industry needs at the speed the market demands.
From small systems to large projects, WEG takes a proactive and detailed approach to solving problems while building open and honest relationships with customers.
Covering all market segments with factories, branches and technical service located around the world, WEG is present in one way or another in everyone’s day-to-day life.
Taking responsibility for the preservation of our planet and people, WEG continually invests in the technology necessary to develop more efficient and environmentally friendly electrical solutions.
Any time, any place. Your challenge is ours. This is WEG.
South America
gBrazil g Jaraguá do Sul (LV & HV Motors,
DC Motors, Generators, Drives, Control & Switchgear)g Guaramirím (Paints and Varnishes)g Blumenau (Transformers) g Guarulhos (Appliance Motors)g São Bernardo do Campo
(MV & HV Motors and Generators) g Manaus (Air-conditioning Motors)g Gravataí (Transformers) g Hortolandia (Transformers)g Joaçaba (Turbines) g Itajaí (Transformers and Panels)
gArgentina g Buenos Aires (Circuit Breakers) g Cordoba (Appliance Motors)g San Francisco (Electrical Panel Assem bly)
North America
gMexico g Huehuetoca (Explosion
Proof, Three-phase LV & HV Motors, Single-phase, Generators and Panels) g Tizayuca (Transformers)
Europe
gPortugal g Maia (LV & HV Standard and Explosion Proof Three-phase Motors)
Asia
gChina g Nantong (LV & HV Motors)
gIndia g Hosur (MV & HV Motors)
WEG around the world
Headquarters
Factories
Commercial Branches
WEG Electric Corp.6655 Sugarloaf ParkwayDuluth, GA 30097Phone: 1-800-ASK-4WEG web: www.weg.net
US
A50
6
Please contact your authorized distributor:
WEG Electric Corp. offers the following products, and more! With a full range of IEC/NEMA Global Certifications and a full line of products, WEG can supply the right solution for your needs anywhere in the world. To learn more about WEG’s products and solutions or to locate a Distributor near you, please call 1-800-ASK-4WEG or visit www.weg.net/us.
Low Voltage Motors,
Single and 3-Phase, 1/8 – 700HP
General Purpose Motors
Explosion Proof Motors
Crusher Duty Motors
IEC Tru-Metric Motors
Pump Motors including JP/JM
P-Base Pump Motors
Oil Well Pumping Motors
Pool & Spa Motors
Brake Motors
Compressor Duty Motors
Farm Duty Motors
Poultry Fan Motors
Auger Drive Motors
IEEE 841 Motors
Stainless Steel Wash Down Motors
Saw Arbor Motors
Cooling Tower Motors
Commercial HVAC Motors
Pad Mounted Motors
Vector Duty Motors
Large Electric Motors
Low Voltage 3-phase motors up to 2,500HP
Motors up to 70,000HP and 13,200V
Wound Rotor Systems (including starters) up to 70,000HP and 13,200V
Synchronous Motors up to 70,000HP and 13,200V
Explosion proof motors (Ex-d) up to 1,500kW and 11kV
Ex-n, Ex-e, Ex-p motors
Variable Frequency Drives
Low Voltage 1/4 to 2500HP, 230V – 480V
Medium Voltage 500-8000HP
Multi-pump systems
NEMA 4X
Dynamic braking resistors
Line and load reactors
Plug and play technology
Network communications: Profibus-DP, DeviceNet, Modbus-RTU
PLC functions integrated
Complete line of options and accessories
Soft Starters
3-1500HP
Oriented start-up
Built-in bypass contactor
Universal source voltage (230-575V, 50/60Hz)
Network communications: Profibus-DP, DeviceNet, Modbus-RTU
Complete Line of options and accessories
MV Soft-starter 3.3kV, 41.6kV: up to
3500HP, Withdrawable Power Stacks, & 8x PT100 Temperature monitoring
Controls
Mini – Contactors
IEC Contactors
Thermal Overload Relays
Manual Motor Protectors
Molded Case Circuit Breakers
Smart Relays
Enclosed Starters: combination & non-combination,
Pushbuttons & Pilot Lights
Timing & Motor Protection Relays
Terminal Blocks
Custom Panels
Custom configured to your specification.
NEMA 1, 12, 3R, 4 and 4X cabinets
Quick delivery of preconfigured drives
and soft starters
UL 508 certified
Low Voltage (230-460)
Made in the U.S.A.
Generators
Brushless Synchronous Generators for diesel gen-sets up to 4,200kVA
Hydro-generators up to 25,000kVA
Turbo-generators up to 62,500kVA
Power Transformers
Built and engineered in North America
Voltages < 500kV
Ratings 5-300MVA
Station class, oil filled, round core, copper windings
Special configurations and designs available!
Ask your WEG Sales Representative for details.
Designed, built, and engineered to ANSI standards.
Custom Solution Package Sales
WEG can package any of its products for ease of sale! Enjoy a single point of contact for the entire package of products and assistance from quote through after-sales support. Ask your WEG Sales Representative for details.
Top Related