ERIKS MarineTurning the tide
Whether it’s key equipment failure, problems with cargo handling
gear, temperature control and refrigeration equipment, charging
or discharging machinery - when you need a situation resolved
you need it resolved quickly. So you need a supplier you can rely
on to supply the right parts, to the right place, at the right time.
That means you need a supplier with a complete understand-
ing of the marine industry and the equipment it employs,
of the demands of classification and legislation, and with the
know-how and capability to repair or replace – and even upgrade
– at sea, in port, or in dry dock, whether in an emergency or dur-
ing a scheduled service.
ERIKS Marine has the products, the expertise, and the resources,
to get your port back in operation, vessel back on hire, out of
port or dry dock and back on schedule - quickly, efficiently, and
cost-effectively.
Repair or replace?When a breakdown occurs, the temptation is to effect a repair
immediately and get your vessel underway as soon as possible.
In fact, if your chosen engineering partner has repair expertise but
no capability to supply a replacement, that will be the only option
offered. Even though it could have a worse impact in terms of cost
or scheduling further down the line.
ERIKS Marine, on the other hand, has the capability and resourc-
es to offer you – where practical – the option to repair or replace.
So you can make your decision based on what’s best for your
budget and your schedule. In addition, ERIKS’ extensive in-house
engineering facilities give you better control over lead times – as
well as quality – so that, if you opt for a temporary repair, a full
repair can be more effectively scheduled to suit your requirements
and availability of the replacement item.
More monitoring, less off-hire timeCondition Based Monitoring (CBM) is another ERIKS service which
can deliver extensive benefits for your budget, your schedule, and
your off-hire time.
Our highly-trained, dedicated, CBM technicians – who have
extensive marine experience – can carry out a range of monitoring
services to help you establish a reliability-based maintenance
strategy. As well as reducing the risk of catastrophic failures,
extending equipment life and increasing productivity, CBM can
even be used to extend the interval between inspections and on
agreement with the relevant Classification Societies can sometimes
help you with your SEEMP targets.
ERIKS CBM services comprise:
▪ Vibration and oil analysis
▪ Thermographic surveys
▪ Dynamic on-site balancing
▪ Motor monitoring
▪ Laser alignment
▪ Filtration
Off-hire time. Late docking time. Delayed sailing time. When it feels as if time is against you, ERIKS Marine can help to turn the tide, with comprehensive component supply, extensive engineering resources, and technical expertise in repair and replacement - all supported by a global logistics infrastructure.
When time isn’t on your side, we are
Accreditations, partnerships, locations ERIKS Marine: ▪ SKF expert in the Marine Industry
▪ Are S.E.C. accredited marine engineers
▪ Work within International Association of Classification Societies (IACS) guidelines
▪ Operate to SOLAS, IMO and MARPOL standards and regulations where applicable
▪ Can work in all major ports from our regional centres
▪ Able to offer full services and support world-wide via our international operation
ERIKS from bow to stern
ERIKS Marine offers a comprehensive repair and replacement parts service, for vessels of all types and tonnage
Thrusters
Bilge pumps and valves
Engine room control panels
Motors and alternators
Deck cranes
Conveyors and materials handling equipment
Self discharging/ loading equipment
Shaft bearingsAuxilliary equipment
Anchor winches
Steering gear
Hydraulics and deck machinery
Hydraulic power packs and systems
Generator
HVAC
Davits
Control panels
Bearings and lubrication
We are an authorised distributor for all the
major global bearing brands with extensive
stocks nationwide. Our lubrication services
cover everything from lubricant supply to
lubrication systems.
Facilities and resources
▪ Bearing Core Competence Centre:
in-house expertise
▪ Largest SKF’s Authorized Distributor
in the Benelux – accredited quality
of technical ability and unique SKF
Marine Expert accreditation in the
Benelux
Capabilities
▪ Specialist global product sourcing
▪ Bearing condition monitoring
products and services
▪ Manufacture of specials, obsolete and
OEM replacement
▪ Lubrication supply, lubrication systems
and accessories
PumpsThe capability to supply, install and repair
pumps is a critical factor when considering
a strategic service partner. These services
are complemented by the ability to under-
take system design, energy audits and fail-
ure mode investigations.
From new pumps, to the supply of indi-
vidual components such as gaskets, seals,
and bearings. Repairs, an overhaul, an
upgrade or a complete system redesign –
depending on your situation, schedule and
budget – ERIKS Marine Services has an
unparalleled capability and expertise you
can rely on, to provide the most effective
solution for maximum productivity and en-
hanced profitability.
Facilities and resources
▪ Nationwide repair workshops
▪ In-house design and fabrication
Capabilities
▪ New pumps
▪ Spare parts
▪ Reverse engineering solutions
for obsolete or long lead-time
components
▪ Maintenance, overhaul, uprating, repair
▪ Condition-based monitoring
▪ Comprehensive pump reports, incor-
porating digital images, test results and
lead times (for repair and replacement)
▪ Turnkey projects
▪ Fault diagnostics
▪ Inventory management and
rationalisation
▪ Pump energy audits
ERIKS’ expertise in the marine industry encompasses the following wide range of products and services, including engineered solutions.
ERIKS Core Competences
ValvesOne of the best-known suppliers of valves
to the marine industry is Econosto – an
ERIKS company. ERIKS supplies standard
valves from stock, as well as sourcing cus-
tomised items for special projects – all to
recognised international marine standards.
Technical teams will help to specify your
requirements, from a single stock item to a
specially-built or modified system.
Facilities and resources
▪ Vast stock of valves and spares from a
range of manufacturers
▪ Actuators and control systems for valves
▪ Fast global despatch
▪ Actuation, modifications, repairs,
painting and special finishes
Capabilities
▪ Technical advice
▪ Dedicated major contracts
project team
▪ Application engineering advice
▪ Testing services in-house or on-site,
including PMI, pressure, temperature,
hot oil, hardness and non-destructive
examination
Motors, generators and alternatorsMotors in the marine environment need
to be reliable above all else. But true reli-
ability means more than just continuous
operation. It also means a consistent level
of performance, minimal energy consump-
tion, and a pr edictable lifespan.
ERIKS Marine offers much more than just
replacement products. Our expertise in
application engineering is essential to im-
proving your competitiveness, and we can
provide you with the correct drives solution
whatever your requirements.
Facilities and resources
▪ National repair workshop network
▪ Unbiased repair or replace programme
▪ National Core Competence Centre for
engineering & technical support
▪ Extensive central and regional stock-
holding
Capabilities
▪ Low, medium and high voltage solutions
▪ HV switchgear
▪ Ongoing monitoring, repair, upgrades
and repairs
▪ SEEMP creation and compliance
▪ Complete project management from
drive selection to installation and
commissioning
▪ Premium efficiency solutions. IE2, IE3
and IE4
▪ Optimal cost of ownership
▪ Safe and hazardous area (ATEX)
solutions
▪ Special design and modifications
ERIKS Core Competences
GasketsAs a market leader in the design and
specification of gaskets, we can supply
production volumes and low volume spe-
cials to order. Our specialists can help
you re-engineer existing applications, or
develop new ones.
Facilities and resources
▪ CAD/automated cutting machines
▪ CNC water jet, knife cutting and rout-
ing machines
▪ Comprehensive base materials stocks
▪ Technical support and advice
Capabilities
▪ Rapid prototyping and production
▪ Independent technical support
▪ Any size or shape
▪ Application or re-engineering
▪ Kanban, kitting and assembly/ installa-
tion packs
▪ High-pressure and high-temperature
solutions
Hose and bellowsHose applications, end fittings and assem-
bly vary widely in the marine environment.
Once the ERIKS Marine technical team
understands your hose application, they
will recommend the correct hose, which
will then undergo rigorous testing during
assembly – including hydrostatic pres-
sure testing in accordance with IACS, to
ensure maximum service life and safety.
Facilities and resources
▪ Large stocks of hoses and fittings
to enable fast delivery
▪ Metallic and stainless braided hose
assemblies manufactured
▪ End terminations in non-corrodable
materials
▪ Anti-static assemblies
▪ Rubber hose for all general-purpose
hoses
▪ PTFE and silicon hose assembly for
corrosive applications
▪ Bellows and expansion joints
▪ Ducting
Capabilities
▪ Application-specific engineering advice
▪ 800 bar test rigs
▪ Rapid hose assembly
▪ Hoses built to order
▪ Hose management database creation
and maintenance
▪ ISO9001 certified, ensuring you are
dealing with a high-quality supplier
▪ ASME9 specialist welding certification
compliant
SealingERIKS is Europe’s largest supplier of
O-rings, and a world-class player in seals
design and development.
Facilities and resources
▪ Materials Technology Centre
▪ Computer-based design and FEA
▪ Test and development facility
▪ Qualified design and test engineers
▪ Manufacturing
▪ On-vessel support
▪ Sealjet machine – produces specials in
minutes
Capabilities ▪ Rapid prototyping
▪ Development of specialist compounds
and materials
▪ Obsolete and non-standard
manufacture
▪ Application re-engineering
▪ Replacement part supply
▪ OEM equivalents and alternatives
▪ Mechanical seal refurbishment
▪ Failure mode analysis
Hydraulics and filtrationERIKS’ engineers can advise and imple-
ment solutions to upgrade and enhance
the hydraulics and filtration systems on
your vessel. Our teams are available to
work closely with our customers to resolve
any technical challenges, from energy ef-
ficiency to system reliability.
Facilities and resources
▪ System and power pack design team
▪ 30,000sq.ft production facility
▪ Volume hose production and kitting
▪ Oil and air analysis
▪ Vast stock, readily available
Capabilities
▪ Pump, valve and cylinder
refurbishment
▪ Oil quality analysis
▪ Power pack design and production
▪ Mobile system building
▪ Filtration system review
Power TransmissionsThe coupling, belt, chain drive or gear
unit is the vital link between prime mover
and driven machine in setting the speed,
smoothing-out shock loads, and keeping
things moving. As such, it demands care-
ful selection, application and maintenance.
Facilities and resources ▪ Application engineers
▪ Drive alignment and other
maintenance tools
▪ Large stocks
▪ Computer Aided Design (CAD)
Capabilities ▪ Application engineering
▪ Custom drive designs
▪ Problem solving
▪ Energy-saving advice
ElectronicsA complete electronics service, from fault-
finding to individual component replace-
ment on PCBs.
Resources
▪ Wide range of test rigs
▪ Specialist electronics team
▪ Specialist system design team
Capabilities ▪ Full testing of wide range of manufac-
turers’ equipment
▪ Fault-finding
▪ Repair to original specification
▪ Bespoke solutions to specific customer
problems
Condition Based MonitoringOur range of CBM services provides a
turnkey solution to reliability-based main-
tenance strategies, implemented by our
highly-trained, dedicated condition moni-
toring technicians, with vessel experience.
We can also survey your slow rotating
equipment (e.g. on cranes) and conduct
online and remote VA monitoring, plus de-
sign, installation and maintenance.
Resources
▪ Dedicated CBM technicians with
vessel experience
▪ Infrared thermometers
▪ Thermal imaging cameras
▪ Dedicated servo test facility
Capabilities ▪ Creation of monitoring schedule
▪ Interpretation of results
▪ Leak detection (including gases)
▪ Thermal imaging
▪ Testing of tachometry, electrical
discharge, vibration, oil and grease
▪ Vibration analysis
Tools, maintenance and PPEWe can standardise, consolidate and sim-
plify supplying your maintenance tools,
equipment and supplies, and provide a
comprehensive range of ‘head-to-toe’
Personal Protection Equipment.
ERIKS Core Competences
Right parts, right place, right time
CO
NSULTATION RECOMMENDATION
S
ON-GO
ING
SU
PP
OR
T
SU
PP
LY, INS
TALLATION REPORTING AND
AN
D C
OM
MIS
SIO
NING TRAINING
ERIKS Marine has a well-established international logistics capabil-
ity, offering fast and efficient deliveries from a large stockholding.
A single point of contact – with in-depth knowledge of the re-
quired documentation - simplifies and speeds up communica-
tions, as well as reducing banking, shipping and other purchasing
costs. Our network of overseas suppliers can facilitate faster de-
liveries depending on your vessel’s position. Our stocks in ERIKS
Dordrecht (also ERIKS Rotterdam and Servicecenter Rotterdam-
Botlek) are held close to World Port Rotterdam itself and its huge
infrastructure, allowing immediate despatch of stocked items to
our (international) customers.
Vessel breakdowns and maintenance don’t always happen where or when they’re convenient. So you need a supplier who can get the parts - and the know-how, even the engineers - to your vessel wherever it may be, as quickly as possible.
Steps to successWhatever vessel type, product you carry or process through
your port, the need for accurate and reliable deliveries are
essential to ensure timely and efficient loading and unloading,
to maintain both ships and ports strict schedules. By fine-
tuning these simple, proven steps below to your particular
requirements, ERIKS can help you achieve your goals.
STEP 1 - Consultation: Reviewing operating costs and critical
machinery to identify and prioritise savings or improved
solutions.
STEP 2 - Recommendations: ERIKS are in the unique position
to offer unbiased recommendations, product design, re-
engineering and repair or replace scenarios.
STEP 3 - Supply, installation & commissioning: Our
engineers can work with your team, on-board or ashore to
agree and implement improvements/overhauls.
STEP 4 - Reporting and training: Ensuring our staff are full
trained to achieve the productivity and the reliability of your
deliveries, product quality and ultimately your machinery’s
well-being.
STEP 5 - On-going support: Continually provided by our
technical specialists, when required, from day-to-day technical
enquires through to on-going condition based monitoring.
Plain sailingERIKS Marine can help to make your job easier, your ves-
sel or fleet more efficient, and your business more profit-
able. Whether you need replacement parts for scheduled
maintenance, repairs for a breakdown, or techniques to help
you plan for one and avoid the other, ERIKS has the indus-
try know-how, the passion for technology, and the breadth
of resources, to meet your needs quickly and cost-effectively.
Contact us now for an initial discussion of how we can help to turn
the tide in your favour.
Marine Expert Center
Keerweer 41
3316 KA Dordrecht
T +31 (0)78 652 21 21
F +31 (0)78 652 21 29
ERIKS Dordrecht
www.eriks.nl
DordrechtKeerweer 413316 KA DordrechtT +31 (0) 78 652 21 21F +31 (0) 78 652 21 29E [email protected]
GroningenRouaanstraat 89723 CD GroningenT +31 (0) 50 368 49 49F +31 (0) 50 314 62 57E [email protected]
AlkmaarToermalijnstraat 51812 RL AlkmaarT +31 (0) 72 514 15 14F +31 (0) 72 515 56 45E [email protected]
LeeuwardenJames Wattstraat 198912 AS LeeuwardenT +31 (0) 58 294 50 50F +31 (0) 58 213 24 71E [email protected]
Capelle a/d IJsselCypresbaan 632908 LT Capelle a/d IJsselT +31 (0) 10 284 11 00F +31 (0) 10 284 68 51E [email protected]
RoermondAlbert Einsteinweg 8 6045 GX RoermondT +31 (0) 475 37 22 33F +31 (0) 475 32 75 40E [email protected]
RotterdamSevillaweg 75 3047 AL RotterdamT +31 (0) 10 245 50 00 F +31 (0) 10 262 06 22E [email protected]
SchoonhovenBroeikweg 252871 RM SchoonhovenT +31 (0) 182 30 34 56F +31 (0) 182 38 69 20
ERIKS Power Transmission locations
ERIKS Marine Expert Center
ERIKS bv Econosto bv
Top Related