LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216 Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707
www.lvscontrols.com
Project:
Model No.:
Comments:
APPLICATION
FEATURESMOUNTING
In the past, emergency lights were kept on 24 hours a day to meet life safety codes. Now, you can use a UL 924 listed Emergency Power Control, Model EPC Panel Mount, to convert regular light fixtures into approved emergency lights. The EPC Panel Mount saves energy and money while ensuring compliance with both life safety and energy codes.
During normal operation, the same room switch, occupancy sensor, relay panel, or lighting control switches regular and emergency fixtures on and off simultaneously.
During a utility power interruption, the EPC Panel Mount automatically bypasses the regular lighting controls, turning the emergency lights ON, regard-less of switch position.
The EPC Panel Mount is panel mounted in a junction box or enclosure and is usually located in the electri-cal room.
Unique, Patented Automatic Diagnostic
Fire Alarm, Remote Test & 0-10V Dimming Option
When the room switch is turned off, the EPC Panel Mount will run a 2.5 self-test routine, veri-fying that the emergency power source was available and that the EPC Panel Mount, ballast, and lamp(s) are all functioning correctly. This feature eliminates the need for time-consuming and costly manual monthly testing and is approved for this purpose. This also allows the unit to be installed in remote or inaccessible loca-tions, because the unit does not rely on access to its manual test switch. LED COMPATIBILE
Utility & Emergency Power Indicator LED’s
Panel mounting with easy to wire terminal blocks
UL®UL924 LISTEDC US
5YEAR
WARRANTY
EPC Panel MountUL924 Emergency Power Control Switched Loads up to 20A
Switch Leg*
Regular Line Hot
Regular Load
Regular Line Neutral
Optional Occupancy Sensor Contact
*
Emergency Hot
Emergency Switch Leg
Emergency Load
Emergency Neutral
**
SPECIFICATIONS
SINGLE LINE DRAWING
WIRING DIAGRAM
ORDERING INFORMATION ADDITIONAL RESOURCES
LVS, Inc. 2555 Nicholson Street, San Leandro, CA 94577-4216 Phone: 510-352-9600 1-800-982-4587 Fax: 510-352-6707
www.lvscontrols.com20160422_E001_Spec
EPC Panel MountFor 0-10V dimming, see EPC-1-D For alternate mounting, see EPC-PM & EPC-A-1
Installation InstructionsTheory of Operation & FAQAlternative Wiring Diagrams
Terms & Conditions/Warranty Information
DESIGNATEDEMERGENCY
LIGHTS
REGULAR ROOM LIGHTS
UL 1008Transfer SwitchOr Equivalent
RegularUtility Power
Emergency Power Source
(Neutral Not Shown)
EPCPanel Mount
EPCPanel Mount
TO ADDITIONAL EPC CONTROLS
REGULARPANEL
RegularUtility Power
EMERGENCYPANEL OR INVERTER
$EPC
Panel Mount
EMERGENCY HOT
#3 WHITE
REGULAR PANEL
EMERGENCYPOWER
TEST SWITCH
UTILITYPOWER
20A
#2 RED
#1 BLACK/ORANGE
*
Relay Panel, Power Pack, Sensor, or other (optional)*
Regular Light (optional)
EMERGENCY PANEL OR INVERTER
20AREGULAR HOT
REGULAR NEUTRALEMERGENCY NEUTRAL
#4 WHITE/BLUE
#5 YELLOW
#6 BLUE
Emergency Light
Note: Emergency Light is also called N/E Light or Normal/Emergency Light by many specifiers
MODEL NO.
SENSING INPUT
LOAD RATING
BALLAST LOAD RATING
INCANDESCENT LOAD
WARRANTY
EPC Panel Mount
120V / 277V
120V - 277V (20A)
20A (120-277V)
1800W (120V) / 1500W (277V)
5 Year Replacement Warranty
ELECTRICAL
MOUNTING
RATING
SHIPPING WEIGHT / COLOR
TEMPERATURE
BODY SIZE
Screw mount in metal enclosure
UL94V-0 Flame Rating
7 oz. / Black
32ºF - 140ºF (0ºC - 60ºC)
3-1/2” x 3” x 3”
MECHANICAL
Top Related