WHO CAN APPLY
The course is multidisciplinary in nature, Full time faculty members from AICTE approved, Government / Government Aided / Unaided Engineering Colleges or Polytechnics or University Departments. Engineers / Professionals from Industry can also attend the I/R programme.
IMPORTANT DATES PART - I
Last Date of Registration : 19.02.2021 Intimation of Selection : 20.02.2021 Commencement of Course : 23.02.2021
REGISTRATION
As this is AICTE–ISTE sponsored I/R
programme, no fee will be charged to the
participants. Interested candidates may register this programme using registration link given
below.
REGISTRATION LINK
https://forms.gle/sPXcki3CAC6Q6nPC6
Number of participants is limited to 100. The selected participants will be intimated through e-mail after final selection. In case of any query contact 9421495596
CIIIT @GCOEC
CHIEF PATRON
Prof. A. D. Sahasrabudhe, Chairman, AICTE
Dr. Abhay E. Wagh, Director, DTE (M.S.)
Dr. P. K. Desai, President, ISTE
PATRON
Col. B. Venkat, Director FDC, AICTE
Prof. V. D. Vaidya, Executive Secretary, ISTE
Dr. M. B. Daigavane, J.D. R.O. Nagpur
Hon. Dr. S. G. Akojwar, Principal, GCOEC
CONVENER
Dr. S. W. Rajurkar
Head, Dept. of Mechanical Engineering
Dr. S. B. Ingole
TPO & CIIIT Coordinator GCOEC
COORDINATOR
Dr. L. P. Dhole
Associate Professor, Mechanical Engineering
+919421495596 Email: [email protected]
CO-COORDINATOR
Prof. D. P. Kapoor
Assistant Professor, Mechanical Engineering
M.-9822949829
Prof. P. V. Chilbule
Assistant Professor, Mechanical Engineering
M.-9028371335
ORGANIZING COMMITTEE
Dr. U. S. Wankhede, Dr. P. V. Washimkar,
Prof. Ms. S.C. Jamunkar, Dr. P. A. Bagde,
Prof. S. W. Burande, Prof. S. T. Ambadkar,
Prof. S. R. Wagh
Department of Mechanical Engineering,
(NBA Accredited)
Government College of Engineering, Chandrapur
AICTE - ISTE
Sponsored
Induction/Refresher
Programme Phase-I (Online mode)
On
“Environmental Challenges:
Process & Pulp Industry”
23 February - 01 March, 2021
Organized By
Mechanical Engineering Department
(NBA Accredited)
Government College of Engineering
Chandrapur (GCOEC)
Ballarshah Bypass Road
Chandrapur - 442 403.
Maharashtra State, INDIA
GENERAL INFORMATION
Chandrapur is the source of many valuable
minerals viz. coal, iron ore, limestone. Tadoba, a
national sanctuary, internationally admired tiger
reserve and forest in the nearby vicinity is
enriched with teak & bamboo plants.
Chandrapur is a prime industrial area, developed
by MIDC, various industries producing Cement,
Steel, Power, & Paper have thrived in the region.
INSTITUTE AT A GLANCE
Govt. College of Engineering, Chandrapur
established in 1996 offers six UG & two PG
programs, affiliated to Gondwana University,
Gadchiroli. Three UG programs viz.
Mechanical, Instrumentation & Electrical
Engineering are accredited by National Board of
Accreditation (NBA). The college is spread over
sprawling 62.5 acres of land, 5 kms away from
Bus Stand & Railway Station. The college was
selected by Govt. of India for Technical
Education Quality Improvement Program
(TEQIP) Phase-II. The institute has recently
signed a MoU with Tata Technologies Limited
(TTL) to establish Center for Invention,
Innovation, Incubation & Training (CIIIT). The
total cost of this project is Rs. 263.4 Core. under
which nine centers are established by TTL.
ABOUT THE DEPARTMENT
The Department of Mechanical Engineering has
good infrastructure & finest academic facilities.
The department offers UG program (B.E.-
Mechanical Engineering) & PG program
(M.Tech- Mechanical Engineering Design). The
department is also recognized as Center for
Higher Learning & Research (CHLR) by
Gondwana University, Gadchiroli. The UG
programme is Accredited by NBA New Delhi.
ABOUT THE PROGRAMME
The environmental impacts of the pulp & paper
industry have been significant throughout the
twentieth century & are still serious. This
resource & capital-intensive industry contributes
to many existing environmental issues, including
global warming, human toxicity, eco-toxicity,
photochemical oxidation, acidification,
nutrification & generation of solid wastes.
Rising concerns over such environmental
menace, not least air, water pollution & climate
change, have led to the introduction of new as
well as more stringent environmental policies
also. This I/R Programme will emphasis insight
knowledge regarding environmentally
sustainable manufacturing practices & related
processes used in process & pulp industries & its
challenges.
OBJECTIVES
To provide in depth knowledge about
Practices & Challenges of Environmentally
Sustainable Manufacturing processes used in process & pulp industries & its industrial applications
To elaborate on recent trends in Environmentally Sustainable Manufacturing
technologies used in process industry.
To develop & deploy advances in
measurement science to achieve sustainability across manufacturing
processes enabling resource efficiency &
production
EXPECTED OUTCOMES
This programme will bring awareness
amongst those who are associated with the
field of Mechanical Engineering/Civil
Engineering / Electrical Engineering/
Instrumentation Engineering/Biomedical
Engineering /Agriculture Engineering; and
may be research scholars, developers &
stake holders of the organization regarding
sustainable manufacturing processes.
Provide systematic path that will enable the
systematic & functional integration of unit
manufacturing systems & subsystems to
perform as a holistic environmentally
sustainable system.
Give insight to evaluate sustainable
performances such as energy & material
efficiencies, emissions, waste, & water
usage of manufacturing processes in process
& pulp industries.
TOPICS COVERED
Environmental responsible products &
processes.
Environmental regulatory requirements.
Environmental sustainable manufacturing
Energy Conservation.
Conservation of natural recourses
Integration of manufacturing systems.
Sustainable performances in energy material
efficiencies, emissions, waste & water
RESOURCE PERSONS
Experts from IITs, NITs, National Level
Research Institutes, relevant Industries & in-
house expertise.
WHO CAN APPLY
The course is multidisciplinary in nature, Full time faculty members from AICTE approved, Government / Government Aided / Unaided Engineering Colleges or Polytechnics or University Departments. Engineers / Professionals from Industry can also attend the I/R programme.
IMPORTANT DATES PART - I
Last Date of Registration : 19.02.2021 Intimation of Selection : 20.02.2021 Commencement of Course : 23.02.2021
REGISTRATION
As this is AICTE–ISTE sponsored I/R
programme, no fee will be charged to the
participants. Interested candidates may register this programme using registration link given
below.
REGISTRATION LINK
https://forms.gle/NDLbB8AeCxan1zC56
Number of participants is limited to 100. The selected participants will be intimated through e-mail after final selection. In case of any query contact 9421495596
CIIIT @GCOEC
CHIEF PATRON
Prof. A. D. Sahasrabudhe, Chairman, AICTE
Dr. Abhay E. Wagh, Director, DTE (M.S.)
Dr. P. K. Desai, President, ISTE
PATRON
Col. B. Venkat, Director FDC, AICTE
Prof. V. D. Vaidya, Executive Secretary, ISTE
Dr. M. B. Daigavane, J.D. R.O. Nagpur
Hon. Dr. S. G. Akojwar, Principal, GCOEC
CONVENER
Dr. S. W. Rajurkar
Head, Dept. of Mechanical Engineering
Dr. U. S. Wankhede
Dean Academics GCOEC
COORDINATOR
Dr. L. P. Dhole
Associate Professor, Mechanical Engineering
+919421495596 Email: [email protected]
CO-COORDINATOR
Prof. D. P. Kapoor
Assistant Professor, Mechanical Engineering
M.-9822949829
Prof. P. V. Chilbule
Assistant Professor, Mechanical Engineering
M.-9028371335
ORGANIZING COMMITTEE
Dr. S. B. Ingole, Dr. P. V. Washimkar,
Prof. Ms. S.C. Jamunkar, Dr. P. A. Bagde,
Prof. S. W. Burande, Prof. S. T. Ambadkar,
Prof. S. R. Wagh
Department of Mechanical Engineering,
(NBA Accredited)
Government College of Engineering, Chandrapur
AICTE - ISTE
Sponsored
Induction/Refresher
Programme Phase-II (Online mode)
On
“Environmental Challenges:
Process & Pulp Industry”
16 March - 22 March, 2021
Organized By
Mechanical Engineering Department
(NBA Accredited)
Government College of Engineering
Chandrapur (GCOEC)
Ballarshah Bypass Road
Chandrapur - 442 403.
Maharashtra State, INDIA
GENERAL INFORMATION
Chandrapur is the source of many valuable
minerals viz. coal, iron ore, limestone. Tadoba, a
national sanctuary, internationally admired tiger
reserve and forest in the nearby vicinity is
enriched with teak & bamboo plants.
Chandrapur is a prime industrial area, developed
by MIDC, various industries producing Cement,
Steel, Power, & Paper have thrived in the region.
INSTITUTE AT A GLANCE
Govt. College of Engineering, Chandrapur
established in 1996 offers six UG & two PG
programs, affiliated to Gondwana University,
Gadchiroli. Three UG programs viz.
Mechanical, Instrumentation & Electrical
Engineering are accredited by National Board of
Accreditation (NBA). The college is spread over
sprawling 62.5 acres of land, 5 kms away from
Bus Stand & Railway Station. The college was
selected by Govt. of India for Technical
Education Quality Improvement Program
(TEQIP) Phase-II. The institute has recently
signed a MoU with Tata Technologies Limited
(TTL) to establish Center for Invention,
Innovation, Incubation & Training (CIIIT). The
total cost of this project is Rs. 263.4 Core. under
which nine centers are established by TTL.
ABOUT THE DEPARTMENT
The Department of Mechanical Engineering has
good infrastructure & finest academic facilities.
The department offers UG program (B.E.-
Mechanical Engineering) & PG program
(M.Tech- Mechanical Engineering Design). The
department is also recognized as Center for
Higher Learning & Research (CHLR) by
Gondwana University, Gadchiroli. The UG
programme is Accredited by NBA New Delhi.
ABOUT THE PROGRAMME
The environmental impacts of the pulp & paper
industry have been significant throughout the
twentieth century & are still serious. This
resource & capital-intensive industry contributes
to many existing environmental issues, including
global warming, human toxicity, eco-toxicity,
photochemical oxidation, acidification,
nutrification & generation of solid wastes.
Rising concerns over such environmental
menace, not least air, water pollution & climate
change, have led to the introduction of new as
well as more stringent environmental policies
also. This I/R Programme will emphasis insight
knowledge regarding environmentally
sustainable manufacturing practices & related
processes used in process & pulp industries & its
challenges.
OBJECTIVES
To provide in depth knowledge about
Practices & Challenges of Environmentally
Sustainable Manufacturing processes used in process & pulp industries & its industrial applications
To elaborate on recent trends in Environmentally Sustainable Manufacturing
technologies used in process industry.
To develop & deploy advances in
measurement science to achieve sustainability across manufacturing
processes enabling resource efficiency &
production
EXPECTED OUTCOMES
This programme will bring awareness
amongst those who are associated with the
field of Mechanical Engineering/Civil
Engineering / Electrical Engineering/
Instrumentation Engineering/Biomedical
Engineering /Agriculture Engineering; and
may be research scholars, developers &
stake holders of the organization regarding
sustainable manufacturing processes.
Provide systematic path that will enable the
systematic & functional integration of unit
manufacturing systems & subsystems to
perform as a holistic environmentally
sustainable system.
Give insight to evaluate sustainable
performances such as energy & material
efficiencies, emissions, waste, & water
usage of manufacturing processes in process
& pulp industries.
TOPICS COVERED
Environmental responsible products &
processes.
Environmental regulatory requirements.
Environmental sustainable manufacturing
Energy Conservation.
Conservation of natural recourses
Integration of manufacturing systems.
Sustainable performances in energy material
efficiencies, emissions, waste & water
RESOURCE PERSONS
Experts from IITs, NITs, National Level
Research Institutes, relevant Industries & in-
house expertise.
WHO CAN APPLY
The course is multidisciplinary in nature, Full time faculty members from AICTE approved, Government / Government Aided / Unaided Engineering Colleges or Polytechnics or University Departments. Engineers / Professionals from Industry can also attend the I/R programme.
IMPORTANT DATES PART - I
Last Date of Registration : 19.02.2021 Intimation of Selection : 20.02.2021 Commencement of Course : 23.02.2021
REGISTRATION
As this is AICTE–ISTE sponsored I/R
programme, no fee will be charged to the
participants. Interested candidates may register this programme using registration link given
below.
REGISTRATION LINK
https://forms.gle/cRKHAtu28pPzcSRTA
Number of participants is limited to 100. The selected participants will be intimated through e-mail after final selection. In case of any query contact 9421495596
CIIIT @GCOEC
CHIEF PATRON
Prof. A. D. Sahasrabudhe, Chairman, AICTE
Dr. Abhay E. Wagh, Director, DTE (M.S.)
Dr. P. K. Desai, President, ISTE
PATRON
Col. B. Venkat, Director FDC, AICTE
Prof. V. D. Vaidya, Executive Secretary, ISTE
Dr. M. B. Daigavane, J.D. R.O. Nagpur
Hon. Dr. S. G. Akojwar, Principal, GCOEC
CONVENER
Dr. S. W. Rajurkar
Head, Dept. of Mechanical Engineering
Dr. P. V. Washimkar
Associate Professor, Mechanical Engineering
COORDINATOR
Dr. L. P. Dhole
Associate Professor, Mechanical Engineering
+919421495596 Email: [email protected]
CO-COORDINATOR
Prof. D. P. Kapoor
Assistant Professor, Mechanical Engineering
M.-9822949829
Prof. P. V. Chilbule
Assistant Professor, Mechanical Engineering
M.-9028371335
ORGANIZING COMMITTEE
Dr. S. B. Ingole, Dr. U. S. Wankhede,
Prof. Ms. S.C. Jamunkar, Dr. P. A. Bagde,
Prof. S. W. Burande, Prof. S. T. Ambadkar,
Prof. S. R. Wagh
Department of Mechanical Engineering,
(NBA Accredited)
Government College of Engineering,
Chandrapur
AICTE - ISTE
Sponsored
Induction/Refresher
Programme Phase-III (Online mode)
On
“Environmental Challenges:
Process & Pulp Industry”
04 May - 10 May, 2021
Organized By
Mechanical Engineering Department
(NBA Accredited)
Government College of Engineering
Chandrapur (GCOEC)
Ballarshah Bypass Road
Chandrapur - 442 403.
Maharashtra State, INDIA
GENERAL INFORMATION
Chandrapur is the source of many valuable
minerals viz. coal, iron ore, limestone. Tadoba, a
national sanctuary, internationally admired tiger
reserve and forest in the nearby vicinity is
enriched with teak & bamboo plants.
Chandrapur is a prime industrial area, developed
by MIDC, various industries producing Cement,
Steel, Power, & Paper have thrived in the region.
INSTITUTE AT A GLANCE
Govt. College of Engineering, Chandrapur
established in 1996 offers six UG & two PG
programs, affiliated to Gondwana University,
Gadchiroli. Three UG programs viz.
Mechanical, Instrumentation & Electrical
Engineering are accredited by National Board of
Accreditation (NBA). The college is spread over
sprawling 62.5 acres of land, 5 kms away from
Bus Stand & Railway Station. The college was
selected by Govt. of India for Technical
Education Quality Improvement Program
(TEQIP) Phase-II. The institute has recently
signed a MoU with Tata Technologies Limited
(TTL) to establish Center for Invention,
Innovation, Incubation & Training (CIIIT). The
total cost of this project is Rs. 263.4 Core. under
which nine centers are established by TTL.
ABOUT THE DEPARTMENT
The Department of Mechanical Engineering has
good infrastructure & finest academic facilities.
The department offers UG program (B.E.-
Mechanical Engineering) & PG program
(M.Tech- Mechanical Engineering Design). The
department is also recognized as Center for
Higher Learning & Research (CHLR) by
Gondwana University, Gadchiroli. The UG
programme is Accredited by NBA New Delhi.
ABOUT THE PROGRAMME
The environmental impacts of the pulp & paper
industry have been significant throughout the
twentieth century & are still serious. This
resource & capital-intensive industry contributes
to many existing environmental issues, including
global warming, human toxicity, eco-toxicity,
photochemical oxidation, acidification,
nutrification & generation of solid wastes.
Rising concerns over such environmental
menace, not least air, water pollution & climate
change, have led to the introduction of new as
well as more stringent environmental policies
also. This I/R Programme will emphasis insight
knowledge regarding environmentally
sustainable manufacturing practices & related
processes used in process & pulp industries & its
challenges.
OBJECTIVES
To provide in depth knowledge about
Practices & Challenges of Environmentally
Sustainable Manufacturing processes used in process & pulp industries & its industrial applications
To elaborate on recent trends in Environmentally Sustainable Manufacturing
technologies used in process industry.
To develop & deploy advances in
measurement science to achieve sustainability across manufacturing
processes enabling resource efficiency &
production
EXPECTED OUTCOMES
This programme will bring awareness
amongst those who are associated with the
field of Mechanical Engineering/Civil
Engineering / Electrical Engineering/
Instrumentation Engineering/Biomedical
Engineering /Agriculture Engineering; and
may be research scholars, developers &
stake holders of the organization regarding
sustainable manufacturing processes.
Provide systematic path that will enable the
systematic & functional integration of unit
manufacturing systems & subsystems to
perform as a holistic environmentally
sustainable system.
Give insight to evaluate sustainable
performances such as energy & material
efficiencies, emissions, waste, & water
usage of manufacturing processes in process
& pulp industries.
TOPICS COVERED
Environmental responsible products &
processes.
Environmental regulatory requirements.
Environmental sustainable manufacturing
Energy Conservation.
Conservation of natural recourses
Integration of manufacturing systems.
Sustainable performances in energy material
efficiencies, emissions, waste & water
RESOURCE PERSONS
Experts from IITs, NITs, National Level
Research Institutes, relevant Industries & in-
house expertise.
Top Related