INT
Enclosures andconnection devices2000 - 2001
Insulated, metal & weatherproof enclosuresConnection devices
Welcome to the new edition of our general catalogue
For easy reference purposes, Hager general catalogue hasbeen divided into four separate catalogues each representingthe following product groups :
1. Enclosures and Connection Systems
2. Circuit Protection Devices
3. Modular Automation and Control Devices
4. Moulded Case Circuit Breakers
A technical section, at the end of each catalogue providesdetailed information of the products and its applications.
1
The success is in the system
The Hager Group
2
With over 6000 dedicatedemployees worldwide, andan innovative, carefullystructured product range,Hager is one of the leadinginternational manufacturersof electrical distribution systems.
Hager has 12 manufacturingsites in France, Germany,Italy, Spain and the UnitedKingdom and has an established marketingnetwork throughout Europe,Asia and Australia servicedby Hager subsidiarycompanies.
Other areas are served bywholly or partially owned distribution companies andthese ensure the availabilityof Hager Group products inover 60 countries worldwide.
Blieskastel - Germany Telford - UK
Obernai - France
Ensheim - Germany
Tehalit headquarters inHeltersberg
3
Hager product brands
Hager products form a fullyintegrated system for safe,efficient and effectiveprotection and control ofelectrical distribution systems.
• Consumer units system.• Distribution board
system.• Enclosures.• Busbars and connections.• Protection devices.• Modular control devices.• Intelligent installation
system for control of lighting, heating andshutters.
Tehalit products cover the complete spectrum of cablemanagement and include systems for domestic, commercial and industrial applications.
• Skirting systems.• Multi - compartment
dado systems.• Architectural systems.• Island systems.• Industrial trunking
systems.• Panel trunkings.• Fire resistant trunkings.
Ashley manufacture a fullrange of “British standard”wiring devices and wiringaccessories and thecompany’s name is synonymous with quality.
• Wall switches andsockets in white, brassand stainless steelfinishes.
• Metalclad accessories.• Safety lampholders.• Ceiling switches and
roses.• Junction boxes and
mounting boxes.
ashashleyley
KLIK secureconnection systemsprovide an innovativesolution to a variety ofconnection requirements.Systems are available forpower and lightingdistribution applications.
• KLIK lighting• KLIK AX• KLIK Power• KLIK LV.• Lighting distribution
systems.• Occupancy sensors.
Hager quality and service
All Hager products benefitfrom a heavy investment inresearch and developmentand from rigorous qualitycontrol procedures at allstages of manufacture.
This has resulted in the company achieving registration to ISO9001.
Hager products areapproved by all relevantbodies and the ongoingprocess of harmonisation ofEuropean and InternationalStandards will ensure continuing success in ourGlobal marketing strategy.
Hager manufacturing,assembly and despatch procedures are subject to therigorous quality standardsdemanded by registration toISO9001.
4
Hager’s business philosophyis totally focussed on providing quality productsand we are committed toexcel at customer service.We achieve these aims byestablishing partnership relationships with our suppliers and customers.
Comprehensive product literature such as this catalogueare supplemented by moretechnical information.
Participation in major international and local trade exhibitions enablesus to stay in close contact with our customers.
5
8 30V surface mounting enclosures IP309 Vector enclosures - IP65 12 Volta surface and flush mounting
enclosures IP3014 Gamma surface mounting enclosures16 Golf surface - flush mounting enclosures IP4118 Vega surface mounting enclosures20 Invicta - Consumer Units IP4122 Invicta - DIN rail enclosures IP4124 Invicta - TP&N distribution boards IP4128 Invicta TP&N distribution boards with modular
incomers32 Invicta TP&N distribution boards IP41
split load with incomers34 Invicta - TP&N distribution boards IP41 with
MCCB incomer36 Orion general purpose enclosures IP6541 Monaco plus metal enclosures IP6548 FW metal enclosures IP4351 Vega D system of enclosures
Enclosures
7
1 row, 1I - 10 V 301w. 50 x h. 140 x d. 65mm
1 row, 2I - 10 V 302w. 50 x h. 140 x d. 65mm
1 row, 4I - 5 V 304w. 90 x h. 160 x d. 65mm
1 row, 6I 1 V 306w. 125 x h. 160 x d. 65mm -
1 row, 8I 1 V 308w. 160 x h. 160 x d. 65mm -
1 row, 6I 1 V 306F1w. 125 x h. 160 x d. 65mm 2x16 + 2x10�
1 row, 8I 1 V 308F8w. 160 x h. 160 x d. 65mm 2x16 + 2x10�
Designation Width in I Pack Cat.17.5mm qty. ref.
30V surface mounting enclosures IP30
8
Serie 30V1 row boxes from 1 to 8Imonobloc chassis and covermade out of insulating material.fixed DIN rail for devices of ashoulder measurement of 47mm.RAL 9010
IP30 IK04
Optionsblanking clips P031, P032.
IEC 60 695-2-1/0 and 60 695-2-1/1
� For technical information,see page 68
V 302 V 308
9
Vector enclosures - IP65
Designation
1 row 2 + 1 ❚
w. 111 x h. 175 x d. 93 mm
1 row, 4 + 2 ❚
w. 165 x h. 190 x d. 113 mm
1 row, 8 + 2 ❚
w. 237 x h. 210 x d. 114 mm
1 row, 12 ❚
w. 310 x h. 302 x d. 151 mm
2 rows, 24 ❚
w. 310 x h. 427 x d. 151 mm
3 rows, 36 ❚
w. 310 x h. 552 x d. 151 mm
4 rows, 48 ❚
w. 310 x h. 677 x d. 151 mm
1 row, 18 ❚
w. 418 x h. 302 x d. 151 mm
2 rows, 36 ❚
w. 418 x h. 452 x d. 151 mm
3 rows, 54 ❚
w. 418 x h. 602 x d. 151 mm
E : 1x25 + 7x16 + 9x10�
supplied cable bushes14xM20+4xM25+1xM32
E : 1x25 + 10x16 + 11x10�
supplied cable bushes8xM20+14xM25+1xM32
E : 1x (1x25 + 11x16 + 13x10�)+1x(1x25 + 2x16 + 2x10�)
supplied cable bushes8xM20+18xM25+2xM32
1
1
1
VE 118E
VE 218E
VE 318E
E : 2x16 + 2x10 �supplied cable bushes3xM20
E : 3x16 + 4x10 �supplied cable bushes2xM20+2xM25+1xM32
E : 5x16 + 6x10 �supplied cable bushes4xM20+2xM25+1xM32
E : 1x25 + 5x16 +7x10�
supplied cable bushes10xM20+2xM25+1xM32
E : 1x25 + 7x16 + 9x10�
supplied cable bushes14xM20+4xM25+1xM32
E : 1x25 + 10x16 + 11x10�
supplied cable bushes8xM20+14xM25+1xM32
E : 1x25 + 11x16 + 13x10�
supplied cable bushes8xM20+14xM25+1xM32
PackQty.
Cat. ref.noterminal
Cat. ref.1terminal
VE 103E
VE 106E
VE 110E
VE 112E
VE 212E
VE 312E
VE 412E
VE 118F
VE 218F
VE 318F
VE 103F
VE 106F
VE 110F
VE 112F
VE 212F
VE 312F
VE 412F
1
1
1
1
1
1
1
Surface mounting enclosureswith transparent doors1 to 4 rows from 2 to 48 ❚ ,1 to 3 rows from 18 to 54 ❚ .
Adjustable DIN rail for shouldermeasurement 47 and 63 mm,transparent hinged cover (2 to10 ) or door (12 to 54 ), 2 lateral knock outs for cableentry or coupling pieces:Pg16 for VE110 and VE116Pg21 for VE112 to VE318.
With premarked knock outs for bushes or cable glands M20,M25, M32, M40 and M50; deli-vered with loose cable bushes,without terminals ( VE..E),with 1 terminals (VE..F);colour : light grey RAL7035nominal voltage : Ui 400V~nominal current : 63A at230/400V~
IEC 60 695-2-1/0 and 60 695-2-1/1
� For technical information,see page 68
IP65 IK07 < 12❚
IK08 > 12❚
class II �
VE 212
VE 106
VE 312
VE 218
Single phase connection 2x(3x16 + 4x10�) 1 VZ 403assembly 63A
snaps on lateral support
Three phase + N connection 3x(3x16 + 2x10�) 1 VZ 428assembly 63A 1x(5x16 + 6x10�)
snaps on lateral support
Lock with 2 keys for all enclosures from 2 to 54 1 VZ 311
Coupling sleeve fit on lateral PG21 knock outs of 1 set VZ 754the enclosures VE 112, VE 212, VE 312
to juxtapose or superpose VE 412, VE 118, VE 218 and VE 318enclosures
reduction of ingress protectionto IP54
Cable entry 14xM20 + 10xM25 + 2xM32 1 VZ 758
reduction of ingress protectionIP54
Designation Characteristics Pack Cat.Qty. ref.
Accessories for Vector enclosures
Designation Characteristics Cat.ref.
10
VZ 403
VZ 428
VZ 428
VZ 754
PE/N terminalswith support for VE 103E 2 x (2x16� + 2x10�) VZ 722
PE/N terminalswith support for VE 106E 2 x (3x16�+ 4x10�) VZ 723
PE/N terminalswith support for VE 110E 2 x (5x16� +62x10�) VZ 724
PE/N terminalswith support for VE 112E 2 x (6x16�+ 7x10�) VZ 725
PE/N terminalswith support for VE 212E 2 x (8x16� + 9x10�) VZ 726
PE/N terminalswith support for VE 312E 2 x (10x16�+ 12x10�) VZ 727
PE/N terminalswith support for VE 412E 2 x (12x16� + 13x10�) VZ 728
PE/N terminalswith support for VE 318E 2 x (13x16� + 17x10�) VZ 729
Adaptor for mountingterminal supports to be ordered for all enclosures VZ 744
Designation Pack Cat.qty ref.
2 rows, 20 I N : 5 x 16 + 5 x 10 1 VP 20ME : 1 x 25 + 2 x 16 + 3 x 10
non modular 1 VP 20G
h. 350 x w. 250 x d. 160mm
Vector enclosures - IP65
11
2 ranges of monobloc enclo-sures made out of insulatingmaterial, colour RAL7035
Modular distribution enclosure surface mounting with transpa-rent door2 to 4 rows, 20 to 72 removable chassis with DIN rails depth adjustable, 150 mm bet-ween railsfront covers with modular cutout, made out of insulatingmaterial
IP65 IK 10class II
Non modular distributionenclosure (VPxxG)surface mounting with plain doorfitted with a plain zinckedmounting plate 2 mm thickness
Plain sides without knock out forcable entries
Symmetrical enclosure permitschange of the door openingdirection by simplereversal of the enclosuredoor fitted with either one or twolocks with 8mm triangular key.
Delivered with :4 wall mounting brackets,terminals, marking stripe (forVP..M)
Options :� key lock, VP01Z� plain front cover (for VP..M)� blanking clip (for VP..M)
IEC 60 695-2-1/0 and60 695-2-1/1
� For technical information,see page 69
3 rows, 36 I N : 5 x 16 + 6 x 10 1 VP 36ME : 5 x 16 + 5 x 10
non modular 1 VP 36G
h. 500 x w. 300 x d. 160mm
3 rows, 54 I N : 6 x 16 + 7 x 10 1 VP 54MT : 5 x 16 + 5 x 10
non modular 1 VP 54G
h. 500 x l. 400 x p. 210mm
3 rows, 72 I N : 6 x 16 + 7 x 10 1 VP 72MT : 5 x 16 + 5 x 10
non modular 1 VP 72G
h. 650 x l. 400 x p. 210mm
Lock with key to replace the delivered 1 VP 01Ztriangular lock,delivered with 2 keys
Blanking clips width 1 I 20 VP 05Z
Blank for cover for enclosure width 250mm 4 VP 02Z(for VP ...M)
width 300mm 4 VP 03Zto replace the frontcovers with modular width 400mm 4 VP 04Zcut outs (height 150mm)
VP 54M
VP 54M
VP 72G
VP 01Z
VP 04Z
12
1 row 12I E : 1 x 25 + 5 x 16 + 7 x 10 1 VA 12D
l. 305 x h. 245 x p. 97mm
Designation Pack Cat.Qty ref.
Volta surface mounting enclosures IP30
2 rows 24I E : 1 x 25 + 9 x 16 + 12 x 10 1 VA 24D
l. 305 x h. 370 x p. 97mm
3 rows 36I E : 1 x 25 + 11 x 16 + 13 x 10 1 VA 36D
l. 305 x h. 515 x p. 97mm
4 rows 48I E : 2 x (1 x 25 + 7 x 16 + 9 x 10) 1 VA 48D
l. 305 x h. 640 x p. 97mm
Lock with key VZ 303
l. 305 x h. 640 x p. 97mm
Connection assemblysingle phase 2 x (3 x 16 + 4 x 10) 1 VZ 403
TP + N 63A 3 x (3 x 16 + 2 x 10) 1 VZ 4281 x (5 x 16 + 6 x 10)
Surface mounting enclosureswith metallic door 1 to 4 rows,12 to 48 I.manufactured from insulatedmaterial, colour RAL 9010, fordevices up to 68 mm depth,DIN rails for shouldermeasurement 47 mm, distancebetween rails 125 mm.metallic door, reversible withintegrated handle, sealable frontcover
IP 30 IK 07class II
Delivered with terminals,blanking stripes with 12Ipremarked, and circuitidentification labelling
Options :key lockconnection assembly
IEC 60 695-2-1/0 and60 695-2-1/1
� For technical information,see page 71
VZ 303
VA 24D
VZ 403
VZ 428
VA 24D
Blanking strip 12I premarked 1 P 012
1 row 12I E : 1 x 25 + 5 x 16 + 7 x 10 1 VU 12D
Designation Pack Cat.qty. ref.
Volta flush mounting enclosures IP30
2 rows 24I E : 1 x 25 + 9 x 16 + 12 x 10 1 VU 24D
3 rows 36I E : 1 x 25 + 11 x 16 + 13 x 10 1 VU 36D
4 rows 48I E : 2 x (1 x 25 + 7 x 16 + 9 x 10) 1 VU 48D
Transparent door for enclosure VU 12D 1 VZ 131
VU 24D 1 VZ 132
VU 36D 1 VZ 133
VU 48D 1 VZ 134
13
Distribution enclosures withmetallic door 1 to 4 rows,12 to 48Iflush mounting in brick orpartition walls removable chassisfor devices of shouldermeasurement 47 mm, distancebetween rails 125 mm flush partmade out of insulated material,frame and door manufacturedfrom metal, reversible door withintegrated handle, sealable frontcover, colour RAL 9010
delivered with :earth bar, blanking stripes with12I premarked, mounting kit forpartition walls, circuitidentification labelling
IP 30 IK 07class II
Options :key lock
Compliance to : EN 60 439-3
IEC 60 695-2-1/0 and60 695-2-1/1
� For technical information,see page 70
Lock with key delivered with 2 keys VZ 303
Connection assemblysingle phase 2 x (3 x 16 + 4 x 10) 1 VZ 403
TP + N 63A 3 x (3 x 16 + 2 x 10) 1 VZ 4281 x (5 x 16 + 6 x 10)
VU 12D
VZ 132
VU 24D
VU 24D
VZ 303
P 012
Gamma surface mounting enclosures IP30
14
1 row, 5I N : 2 x 16 + 2 x 10 1 GD 05Awith premarked cut for 6I E : 2 x 16 + 2 x 10
w. 145 x h. 140 x d. 65mm
1 row, 10I E : 3 x 16 + 4 x 10 2 + fi 1 GD 10Awith premarked cut for 12I
w. 250 x h. 140 x d. 65mm
Designation Pack Cat.qty. ref.
1 row, 13I E : 6 x 16 + 7 x 10 2 + fi 1 GD 13A
w. 250 x h. 225 x d. 88mm
2 rows, 26I Ph : 2 x 16 + 2 x 10 4 + fi 1 GD 26AN : 2 x 16 + 2 x 10
w. 250 x h. 350 x d. 88mm E : 10 x 16 + 12 x 10
3 rows, 39I Ph : 3 x 16 + 4 x 10 6 + 3/2 1 GD 39AN : 3 x 16 + 4 x 10
w. 250 x h. 475 x d. 88mm E : 12 x 16 + 13 x 10
4 rows, 52I Ph : 3 x 16 + 4 x 10 8+ 4/2 1 GD 52AN : 3 x 16 + 4 x 10
w. 250 x h. 600 x d. 88mm E : 2 x (1x25 + 7x16 + 9x10)
1 row, 26I Ph : 2 x 16 + 2 x 10 4+ 2/2 1 GD 26CN : 2 x 16 + 2 x 10
w. 500 x h. 200 x d. 85mm E : 10 x 16 + 12 x 10)
IP30 surface mountingenclosures1-4 rows 15-52 modules.enclosures are of an insulatingmaterial coloured RAL 9010.insulating chassis and frame.fixed DIN rail for devices of amaximum shoulder measure-ment of 45mm, distancebetween rails 125mmpremarked cable entries on top,bottom and side.
delivered with- terminals- blanking clips- marking strip
IEC 60 695-2-1/0 and60 695-2-1/1
� For technical information,see page 71
GD 05A
GD 26A
GD 13A
GD 26C
GD 52A
options- additional connection
assemblies- cable trunking- back plates- plain and transparent doors- door locks
these enclosures can bedelivered with brass terminalsand supports for neutral andearth connection
IP30 IK 07
Plain door for : GD 13A 1 GP 13P
GD 26A 1 GP 26P
GD 39A 1 GP 39P
depth : 26.5mm GD 52A 1 GP 52P
Transparent door for : GD 13A 1 GP 13T
GD 26A 1 GP 26T
GD 39A 1 GP 39T
depth : 26.5mm GD 52A 1 GP 52T
Designation Characteristics Pack Cat.qty. ref.
Accessories for Gamma enclosures
Back plate for enclosure :insulated material GD 13A 1 GS 13D
GD 26A 1 GS 26D
GD 32A 1 GS 39D
GD 52A 1 GS 52D
GD 26C 1 set of GS 26C2 plates
Connection assembly accepts terminals : 10 GZ 10Awithout terminals K 140, K 142, K 143, K 148
K 151, K 156
TP&N Ph : 3 x (3 x 16 + 2 x 10) 10 GZ 12AN : 1 x (4 x 16 + 7 x 10)
Blanking strip width 13I 10 JP 014to blank unused rows
Door lock with key for doors : 1 GZ 05AGP 13P, GP 26P, GP 39P,GP 52P, GP 13T, GP 26T,GP 39T, GP 52T
15
Doors for Gamma enclosuresoffers an addtional protection ofmodular devices and increasesingress protection to IP40.Plain (RAL 9010) or transparent.Delivered with 2 hinges, 1 latchand 2 screws.
IEC 60 695-2-1/0 and60 695-2-1/1
optionlock.
GP 26P
GP 26T
GZ 05A
JP 014
Golf surface mounting enclosures IP41
16
Designation Packqty.
Door Cat.ref.
1 row, 4 ❚
dimensions mm:(width x height x depth)130 x 180 x 86
IP41 surface mountingenclosures
1-3 rows, 4-36 modules.enclosures are of an insulatingmaterial coloured RAL9010.fixed Din rail for devices of amaximum shoulder measure-ment of 47mm, distance bet-ween rails 125mm reversibledoor-opening 180°.
delivered with- blanking clips
IP41 IK 07class II
Option :- key lock
these enclosures can bedelivered with brass terminal and supports for neutral andearth connection.
IEC 60 695-2-1/0 and 60 695-2-1/1
� for dimensional information, see page 72
1 VS 04P.
1 VS 04T.
opaque
transparent
1 row, 8 ❚
dimensions mm:(width x height x depth)200 x 180 x 86
1 VS 08P.
1 VS 08T.
opaque
transparent
1 row, 12 ❚
dimensions mm:(width x height x depth)275 x 225 x 95
1 VS 12P.
1 VS 12T.
opaque
transparent
2 rows, 24 ❚
dimensions mm:(width x height x depth)275 x 350 x 95
1 VS 24P.
1 VS 24T.
opaque
transparent
3 rows, 36 ❚
dimensions mm:(width x height x depth)275 x 500 x 95
1 VS 36P.
1 VS 36T.
opaque
transparent
golf enclosures 12, 24, 36 ❚ 1 VZ 311Key lock
VS 24..
Golf flush mounting enclosures IP41
17
Designation packqty.
door Cat.ref.
1 VF 04P.
IP41 flush mounting enclosu-res
1-3 rows, 4-36 modules.enclosures are of an insulatingmaterial coloured RAL 9010.fixed Din rail for devices of amaximum shoulder measure-ment of 47mm, distance bet-ween rails 125mm reversibledoor-opening 180°.
delivered with- blanking clips
IP41 IK 07class II
Option :- key lock
these enclosures can bedelivered with brass terminaland supports for neutral andearth connection.
IEC 60 695-2-1/0 and 60 695-2-1/1
� for dimensional information, see page 72
1 VF 04T.
opaque
transparent
1 row, 4 ❚
dimensions mm:(width x height x depth)surface 180 x 220 x 17wall recess 140 x 177 x 73
1 row, 8 ❚
dimensions mm:(width x height x depth)surface 250 x 230 x 17wall recess : 209 x 189 x 77
1 VF 08P.
1 VF 08T.
opaque
transparent
1 VF 12P.
1 VF 12T.
opaque
transparent
1 row, 12 ❚
dimensions mm:(width x height x depth)surface 322 x 265 x 17wall recess : 281 x 224 x 80
1 VF 24P.
1 VF 24T.
opaque
transparent
2 rows, 24 ❚
dimensions mm:(width x height x depth)surface 322 x 390 x 17wall recess : 281 x 349 x 80
1 VF 36P.
1 VF 36T.
opaque
transparent
3 rows, 36 ❚
dimensions mm:(width x height x depth)surface 322 x 535 x 17wall recess : 281 x 491 x 80
golf enclosures 12, 24, 36 ❚ 1 VZ 311Key lock
VF 12..
VF 24..
Vega surface mounting enclosures IP40
18
1 row 18I E : 1x25 + 7x16 + 9x10� 1 opaque VB 18P
w. 370 x h. 300 x d. 145mm transparent VB 18T
2 rows 36I E : 1x25 + 11x16 + 13x10� 1 opaque VB 36P
w. 370 x h. 450 x d. 145mm transparent VB 36T
3 rows 54I E : 2x(1x25 + 7x16 + 9x10� ) 1 opaque VB 54P
w. 370 x h. 600 x d. 145mm transparent VB 54T
Key lock supplied with 2 keys 1 VZ 310for transparentor opaque doors
Connection assemblies
3 Ph + N 63A 2 x (3x16 + 2x10�) 1 VZ 7091 x (4x16 + 7x10�)
1 Ph + N 90A incoming 1x25� 1 VZ 712outgoing 4x16�
Designation Pack Cat. qty. ref.
Designation Pack Cat. qty. ref.
IP40 surface mountingenclosureswith transparent or plain doors.1 -3 rows 18-54 modules.enclosures are of an insulatingmaterial coloured whiteRAL 9010.the enclosures feature aremovable chassis with Din railsfor ease of installation.top and bottom cable entryplates are removable andinterchangeable.the door is also reversible withan integral flush handle.
optionsdoor look.cable trunking,
IP40 IK 08
class II
IEC 60 695-2-1/0and 60 695-2-1/1
� for dimensional information, see page 73
VB 18E
VB 36E
VZ 310
VZ 709
Make one out of two !Make one out of two !
Gamma : A new system of trunking + enclosure
Invicta consumer units IP41
20
The metal clad range of consumer units are availablewith a fixed and split load 100Afully tinned busbar. The unitsfeature either a transparent ormetal cover, protecting thedevices, and can be supplied as
either a surface or flush mounted option. The 2 poleincomer options can be either aswitch disconnector, RCCB orMCB. The outgoing devices areeither MCB’s or single / doublemodules RCBO’s.
Blank inserts are available tocover unused ways. All con-sumer units have standard sizeknockouts and are delivered withearth bar, neutral bar, busbarshroud and label kit.
The units have been fully ASTAtested and comply withBSEN60439-3 (annexZA).
Neutral terminal• fully rated 100A
Outgoing devices• mcb’s• 1 module rcbo’s• 2 modules rcbo’s
Busbar• tinned copper 100A• fully shrouded
Knock outs• standard conduit sizes• saves installation time
Earth terminal• clean earth (if required)
Domed holes• ease of mounting on
uneven surfaces
Cover • transparent or metal flap• flush and surface versions
Invicta consumer units IP41
Invicta consumer units IP41 split load
21
4 + 2 4 2 VT 42SM VP 42SM VT 42FM VP 42FM
5 + 3 5 3 VT 53SM VP 53SM VT 53FM VP 53FM
4 + 4 4 4 VT 44SM VP 44SM VT 44FM VP 44FM
7 + 3 7 3 VT 73SM VP 73SM VT 73FM VP 73FM
8 + 4 8 4 VT 84SM - VT 84FM -
No. of Outgoing Surface FlushWays Cat. Ref. Cat. Ref. Plastic
Metal flap Plastic flap Metal flap flap
No. of Outgoing Surface FlushWays Cat. Ref. Cat. Ref. Plastic Split Load Switch RCCB Metal flap Plastic flap Metal flap flap
Description:The metal range of consumerunits with fixed tinned busbaroffer up to a maximum 16 waysin a fixed load configuration, and8 + 4 ways in a split load config-uration. The incoming and out-going devices have to be seper-ately selected and fitted by theinstaller. A neutral & earth termi-nal is supplied for each outgoing
way and extra earthing terminalsfor bonding purposes. Alloptions must be internally wiredby the contractor.
Electrical Specification:Rated Voltage (Ue) = 240V~Rated Current (In) = 100AInsulation Voltage (Ui) = 6kVConditional Short Circuit Current =25kA
Mechanical Specification:Protection Category: IP 41Material 1.25mm CR4: SteelPowder Coated: RAL 9010
Devicesincoming:MCB 2P-35mm2
100A 2P SwitchDisconnector - 35mm2
≤63A 2P RCCB - 25mm 2
Outgoing:SP MCB SP RCBO (with flying lead) DPRCBO’s (with flying lead)
� For technical information,see page 74
4 VT 04SM VP 04SM VT 04FM VP 04FM
6 VT 06SM - VT 06FM -
8 VT 08SM VP 08SM VT 08FM VP 08FM
10 VT 10SM VP 10SM VT 10FM VP 10FM
12 VT 12SM VP 12SM VT 12FM VP 12FM
16 VT 16SM VP 16SM VT 16FM VP 16FM
Invicta DIN rail enclosures IP41
22
Invicta DIN rail distributionboards are available from 1 rowto 5 rows of 16 modules per row.The units feature a metal coverwith hinged metal doors. Thedoors can be hinged for right orleft opening.A removable DIN rail chasisfacilitates wiring of the boardsand installation on sites.A continous rail on each sideallows for multiple neutral andearth terminals to be clipped on.The boards can be fitted with allhager modular devices as
incomers and outgoing ways forprotection and controls. InvictaDIN rail boards are available forflush and surface mounting.The center distance betweenrows is 150mm which ensuresadequate space for ease ofwiring even with all devicesfitted. Unused ways can beblanked off for subsequent use.Gland plates are removable andhave pre-punched knockoutsfor ease of installation on sites.
The boards can be verticallyand horizontally combinedtogether to form variouscombinations for extensionsand distribution requirementsabove 5 rows or suited withType ‘B’ boards.
Gland plate• removable top and bottom• standard conduit knockouts.
Domed key holes• ease of mountingon uneven surfaces
Space• 150 mm between rails• space below chasis for wiring• allows all hager modular devicesto be fitted, including1 module RCBO’s
Metal covers• protection category IP41• flush and surface versions• doors can be right or lefthinged
Din rail chasis• removable forbench wiring• can be installedlater on site
Terminal rail• continous on both sides• allows multiple neutrals &earth terminals to be clippedon
Invicta DIN rail enclosures IP41
23
No. of Rows No.of Modules Surface Cat. ref. Flush Cat. ref. Metal Plastic Metal Plastic flap flap flap flap
1 8 VT 08SD VP 08SD VT 08FD VP 08FD
1 12 VT 12SD VP 12SD VT 12FD VP 12FD
1 18 VT 18SD VP 16SD* VT 18FD VP 16FD*
1 16 JK 16SD - JK 16FD -
2 32 JK 32SD - JK 32FD -
3 48 JK 48SD - JK 48FD -
4 64 JK 64SD - JK 64FD -
5 80 JK 80SD - JK 80FD -
* Note : 16 ways maximum
Description:The metal range of din railboards offer 8, 12 & 18 ways onone row, 16, 32, 48, 64 and 80ways on 2, 3, 4, & 5 rowsrespectively. On the 8, 12 and 18way a neutral and earth terminalis supplied for each outgoingway and also extra earth terminals. The multi row enclosures are supplied with
an adjustable din rail frame andearth and neutral terminals haveto be selected by the installer.See page 60
Mechanical Specification: Protection Category: IP 41Material: 1.25mm CR4 SteelPowder Coated: RAL 9010
DevicesDesigned to accept all modulardevices.
� For technical information,see page 75
VT 08SD
JK 48FD
Accessories
Blank Plate 1 Module 1 P 032H
Keylock Kit 1 P 063K
* For comb busbars refer pages 58-59
description qty Cat.
Ref.
Invicta - TP&N distribution board IP41
24
Description:The invicta metal clad range ofthree phase and neutral distribution boards are availablewith a fixed load or split loadpan assembly. They all have afully flush fitted metal door witha "slam" type catch. The 100Aversion comes with a din railslot, 10 modules wide, to allowthe fixing of a 100A, 125A &
160A incomer and various othermodular devices. The 200A version has a cut out for theincomer only. All boards aredelivered with both Neutral andEarth bars fitted and the neutralis designed to wrap around theincoming device to ensure thatextra wiring space is availablefor the outgoing devices. Theincoming device must be
selected and fitted by theinstaller. The top and bottomgland plates are removable andalso include knock-outs to suitstandard size conduits. The panassembly is fully shrouded andthe busbars are one piece in design, this ensures that no "hotspots" can occur as there are nomechanical joints. The boardshave been designed and
independently tested to therelevant parts ofBSEN 60439-1 & 3.
Gland plates• removable gland plates (top / bottom)
Covers• reversible door
outgoing circuitsFits with SP+TP MCB’s and1 & 2 module RCBO’s
circuit identification wallet
Incomers• 10 modules width of din rail
to accept modular products• safety shrouds
• robust powdercoated sheetsteel enclosure
• 10 modules slot cut out for modular products
Busbars• totally enclosed, busbar system rated at 225A, tinned copper• colour coded circuit designation
Description:Three Phase and Neutral Type BDistribution Boards are availablein 4, 6, 8, 10, 12, 16, 18 or 24triple pole outgoing ways. The100A version is supplied complete with a 10 module dinrail opening to mount the 100Aincoming devices and otherhager modular products. The200A version comes with theopening to mount a 200A switchdisconnector only. All boards aredelivered with both Neutral &Earth Bars and can be extendedusing din rail type extensionboxes. All Phase Neutral & Earthbars are fully tinned.The splitload version is delivered with
cable and links for internal connection and has a front cut out slot 12 modules wide. Allboards are delivered with circuitidentiflication labels.
Electrical Specification:Tested and complies to the relevant parts of BSEN 60439-1& 3: Electrical Supply: 415V ~Maximum Continuous Rating:225A The rating of the board isin accord with the incomingdevice.Unconditional Withstand:20kA for 0.2s.
Mechanical Specification:Protection Category IP 41Material 1.25mm CR4 Steel Powder Coated RAL 9010
DevicesIncoming: 100A Switch Disconnector (50mm2)125A Switch Disconnector (M8 bolts)160A Switch Disconnector (M8 bolts)200A Switch Disconnector (M8 bolts)Direct Connection (M8 bolts) 63 or 100 A RCCB (35mm2)
Outgoing:SP MCB’sTP MCB’sSP RCBO’s (with flying lead)DP RCBO’s (with flying lead)
� For technical information,see page 76
Invicta - TP&N distribution board IP41
25
Fixed load 160ANumber of Surface * Flush *TP Ways Cat. Ref. Cat. Ref.
4 JK 04SM JK 04FM
6 JK 06SM JK 06FM
8 JK 08SM JK 08FM
10 JK 10SM JK 10FM
12 JK 12SM JK 12FM
16 JK 16SM JK 16FM
18 JK 18SM JK 18FM
24 JK 24SM JK 24FM
* Delivered with 100A connecting links + protective shrouds.* An incoming device must be separately ordered, see page 26. * When used with 160A or 125A incoming switch disconnector or RCCB separate links must be ordered
see page 26* For 200A version replace suffix ‘M’ with ‘S’ i.e. JK 04SS or JK 04FS order 200A switch disconnnector and
links from page 26
Number of Surface * Flush *TP Ways Cat. Ref. Cat. Ref.
Split load4+2 JK 42SM JK 42FM
4+4 JK 44SM JK 44FM
6+4 JK 64SM JK 64FM
6+6 JK 66SM JK 66FM
8+4 JK 84SM JK 84FM
8+8 JK 88SM JK 88FM
* Delivered with 100A connecting links + protective shrouds* An incoming device must be separately ordered, see reference page 26
Invicta accessories
26
Designation Characteristics No of Pack Cat.poles qty. ref.
Incoming devices
63A switch disconnector 3 4 SB 363
63A switch disconnector 4 3 SB 463
100A switch disconnector 3 4 SB 399
100A switch disconnector 4 3 SB 499
125A switch disconnector 3 1 JK 125S
160A switch disconnector 3 1 JK 160S
200A switch disconnector 3 1 JK 200S
RCCB’s
30mA 100A RCCB 4 1 CD 485Z
100mA 100A RCCB 4 1 CE 485Z
30mA 63A RCCB 4 1 CD 464Z
100mA 63A RCCB 4 1 CE 464Z
300mA 63A RCCB 4 1 CF 464Z
Incoming link kits
For SB 499 current : 100A 1 JK 100L
For RCD’s - 1 JK 100R
For 125A switch disconnector current : 125A 1 JK 125L
For 160A switch disconnector current : 160A 1 JK 160L
For 200A switch disconnector current : 200A 1 JK 200L
Extension box for modulardevices (for all Invicta TP&N)
16 mod surface extension box JK 16SX
16 mod flush extension box JK 16FX
joint kit for surface extension box JK 01SK
joint kit for flush extension box JK 01FK
cable speader box surface JK 02SK
cable speader box flush JK 02FK
SB 399
CD 264Z
JK 06SB399 with JK16SD
implyunroll it !
LFR trunking
• save space
• save time
• save money
The highways for electricity
S
Invicta TP& distribution boards IP41with modular devices
28
Invicta Type ‘B’ distributionboards are available in eightbasic sizes from 4 to 24 TPways. The units feature a metalback box, ASTA certifiedencapsulated TP tinned copperbusbar pan assembly, metalcover with hinged doors. Thedoors can be hinged for right orleft opening. The busbar panassembly is removable to
facilitate wiring of the boardsand installation on sites. Neutraland earth terminals are providedas standard. The boards comefitted with various hager modu-lar devices as incomer options.All hager MCB’s and 1 moduleRCBO’s can be fitted asoutgoings.Invicta Type ‘B’ are available forflush and surface mounting.
Even with all devices fitted theboards have adequate space forease of wiring. Unused wayscan be blanked off forsubsequent use. Gland platesare removable and havepre-punched knockouts.The boards can be horizontallyand vertically combined withDIN rail boards to form a omplete system for installation
of other modular devices likecontactors, time switches etc. Invicta Type ‘B’ boards complyto BS EN 60 439 Pts 1 & 3.
Earth terminals • suitable for 10 mm
2wires.
Busbar system• single piece tinned
copper• ASTA certified• totally encapsulated
Neutral terminals • on both sides for 10
way boards and up.• suitable for 10 mm
2
wires. • disconnect facility
Gland plate• removable top and bottom• standard conduit knockouts.
Domed key holes• ease of mounting
on uneven surfaces
Metal covers• protection category IP41• flush and surface
versions• doors can be right or left
hinged
Incomer• various options• shroud for incomer
links• din rail for various
incomers
Invicta Type ‘B’ distributionboards feature a metal back box,encapsulated tinned copperbusbar pan assembly, metalcover with hinged door. Theboards are available in eightsizes from 4 to 24 TP ways withvarious incomer options. The225A three phase integratedbusbar accepts all hager MCB’sand 1 module RCBO’s asoutgoing devices. Earth and
neutral terminals are supplied asstandard.
Popular versions are shownbelow.
For other versions pleasecontact us.
Technical Characteristics:Material: Sheet steel
1.25mm CR4 Colour: Powder coatedRAL 9010. Protection Category: IP41Busbar Rating: 225A
ASTA Certified Unconditional withstand :20kA for 0.25
� For technical information,see page 76
Invicta - TP&N distribution board IP41with isolating switch incomer
29
Order codes for Invicta -TP&N type “B” boards with Surface Flushfitted incomer Cat. Ref. Cat. Ref.
Isolating switches
SB 399 - 100A TP4 way JK 04SB399 JK 04FB3996 way JK 06SB399 JK 06FB3998 way JK 08SB399 JK 08FB39910 way JK 10SB399 JK 10FB39912 way JK 12SB399 JK 12FB39916 way JK 16SB399 JK 16FB39918 way JK 18SB399 JK 18FB3994 way JK 24SB399 JK 24FB399
Isolating switches
JK 125S - 125A TP4 way JK 04SS125 JK 04FS1256 way JK 06SS125 JK 06FS1258 way JK 08SS125 JK 08FS12510 way JK 10SS125 JK 10FS12512 way JK 12SS125 JK 12FS12516 way JK 16SS125 JK 16FS12518 way JK 18SS125 JK 18FS1254 way JK 24SS125 JK 24FS125
Isolating switches
JK 160S - 160A TP4 way JK 04SS160 JK 04FS1606 way JK 06SS160 JK 06FS1608 way JK 08SS160 JK 08FS16010 way JK 10SS160 JK 10FS16012 way JK 12SS160 JK 12FS16016 way JK 16SS160 JK 16FS16018 way JK 18SS160 JK 18FS1604 way JK 24SS160 JK 24FS160
Isolating switches
JK 200S - 200A TP4 way JK 04SS200 JK 04FS2006 way JK 06SS200 JK 06FS2008 way JK 08SS200 JK 08FS20010 way JK 10SS200 JK 10FS20012 way JK 12SS200 JK 12FS20016 way JK 16SS200 JK 16FS20018 way JK 18SS200 JK 18FS2004 way JK 24SS200 JK 24FS200
JK 10SB399
Invicta - TP&N distribution board IP41with MCB incomer
30
Order codes for Invicta -TP&N type “B” boards with Surface Flushfitted incomer Cat. Ref. Cat. Ref.
MCBNM 384 - 100A TP 10kA
4 way JK 04SN384 JK 04FN384
6 way JK 06SN384 JK 06FN384
8 way JK 08SN384 JK 08FN384
10 way JK 10SN384 JK 10FN384
12 way JK 12SN384 JK 12FN384
16 way JK 16SN384 JK 16FN384
18 way JK 18SN384 JK 18FN384
24 way JK 24SN384 JK 24FN384
JK 08SN384
Invicta - TP&N distribution board IP41with isolating switch incomer
31
Order codes for Invicta -TP&N type “B” boards with Surface Flushfitted incomer Cat. Ref. Cat. Ref.
Residual Current Circuit Breaker
CD 441Z - 40A 4P 30mA4 way JK 04SD441 JK 04FD4416 way JK 06SD441 JK 06FD4418 way JK 08SD441 JK 08FD44110 way JK 10SD441 JK 10FD44112 way JK 12SD441 JK 12FD44116 way JK 16SD441 JK 16FD441
Residual Current Circuit Breaker
CD 464Z - 63A 4P 30mA4 way JK 04SD464 JK 04FD4646 way JK 06SD464 JK 06FD4648 way JK 08SD464 JK 08FD46410 way JK 10SD464 JK 10FD46412 way JK 12SD464 JK 12FD46416 way JK 16SD464 JK 16FD46418 way JK 18SD464 JK 18FD46424 way JK 24SD464 JK 24FD464
Residual Current Circuit Breaker
CE 464Z - 63A 4P 100mA4 way JK 04SE464 JK 04FE4646 way JK 06SE464 JK 06FE4648 way JK 08SE464 JK 08FE46410 way JK 10SE464 JK 10FE46412 way JK 12SE464 JK 12FE46416 way JK 16SE464 JK 16FE46418 way JK 18SE464 JK 18FE46424 way JK 24SE464 JK 24FE464
Residual Current Circuit Breaker
CE 485Z - 100A 4P 30mA4 way JK 04SD485 JK 04FD4856 way JK 06SD485 JK 06FD4858 way JK 08SD485 JK 08FD48510 way JK 10SD485 JK 10FD48512 way JK 12SD485 JK 12FD48516 way JK 16SD485 JK 16FD48518 way JK 18SD485 JK 18FD4854 way JK 24SD485 JK 24FD485
1 module RCBO’s can beinstalled as outgoingdevices
Invicta TP& distribution boards IP41split load with incomers
32
Invicta split busbar distributionboards are available in fivesizes. The units feature a metalback box, ASTA certified encap-sulated TP tinned copper bus-bar pan assemblies, metal coverwith hinged doors. The doorscan be hinged for right or leftopening. Standard sizes avail-able are 4+2 TP, 4+4 TP, 6+4 TP,6+6 TP, 8+4 TP and 8+8TP.Two neutral and one earth ter-minals are provided as stan-dard. The boards can beequipped with 1 Isolating
Switch and 1 RCCB or 1Isolating Switch and 2 RCCB’sto offer different protection lev-els. The incomers are shroudedwith a specially designedshroud. Hager MCB’s can be fit-ted as outgoings.
Even with all the devices fittedthe boards have adequatespace for ease of installationand wiring on site. Unused out-going ways can be blanked offfor subsequent use. Glandplates are removable and have
pre-punched knockouts.
The boards can be horizontallysuited with DIN rail boards toform a complete system forinstallation of modular deviceslike contactors, timers etc.Alternatively, a top extensionbox with DIN rail can beinstalled. Invicta split boardscomply to BS EN 60 439 Pts 1& 3.
Earth terminals • suitable for 10 mm
2
wires.
Busbar system• single piece tinned
copper• ASTA certified• totally encapsulated
Neutral terminals • on both sections
• suitable for 10 mm2
wires.
Gland plate• removable top and bottom• standard conduit knockouts.
Domed key holes• ease of mounting
on uneven surfaces
Metal covers• protection category IP41• flush and surface versions• doors can be right or lefthinged
Incomer• shrouded incomer links• din rail for various incomers
Invicta TP& distribution boards IP41with MCCB incomer
34
Invicta MCCB incomer distribu-tion boards are available in 6sizes with 125A frame MCCB’sand 4 sizes with 225A frameMCCB’s. The units feature ametal back box, ASTA certifiedencapsulated TP tinned copperbusbar (225A) pan assembliesand metal cover with hingeddoors. The doors can be hingedfor right or left openingNeutral and earth terminals areprovided as standard. Theboards can be equipped withMCCB’s of different breaking
capacities and ratings (sameframe) to offer various incomeroptions to match the siterequirements. The incomers areshrouded with a speciallydesigned shroud. All hagerMCB’s and RCBO’s can be fit-ted as outgoings.
Even with all the devices fittedthe boards have adequatespace for ease of installationand wiring on site. Gland platesare removable and have pre-punched knockouts.
The boards can be horizontallycombined with DIN rail boardsto form a complete system forinstallation of modular deviceslike contactors, timers etc.
Alternatively, a top extensionbox with DIN rail can beinstalled.
Invicta MCCB Incomer boardscomply with BS EN 60 439 Pts1 & 3.
Earth terminals
• suitable for 10 mm2
wires.
Busbar system• single piece tinned cop-per• ASTA certified• totally encapsulated
Neutral terminals
• suitable for 10 mm2
wires.
Gland plate• removable top and bottom• standard conduit knockouts.
Domed key holes• ease of mountingon uneven surfaces
Metal covers• protection category IP41• flush and surface versions• doors can be right or left hinged
Incomer• various options• shroud for incomerlinks
Invicta split busbar distributionboards are installed in areas whereRCCB protection for selective cir-cuits is necessary. They are avail-able in five sizes. The design of Invicta split bus-bar boards allows many arrange-ment of the incoming devices tobe produced to meet specificcustomer requirements.Two of the most specified ver-sions are shown below withunique order codes. For otherversions please contact us.
Technical Characteristics:Material: Sheet Steel 1.25mm CR4Colour: Epoxy Powder Coated RAL9010.Protection Category: IP41Busbar Rating 225A ASTA Certified.Unconditional withstand :20kA for 0.25
� For technical information,see page 77
Invicta - TP&N distribution board IP41split load with incomers
35
Designation Number of TP ways Surface FlushCat. Ref. Cat. ref.
125A frame MCCB incomer Incomer 4 JK 04SD450 JK 04FD450125A 18kA TPMCCB HD 450 6 JK 06SD450 JK 06FD450
8 JK 08SD450 JK 08FD450
10 JK 10SD450 JK 10FD450
12 JK 12SD450 JK 12FD450
16 JK 16SD450 JK 16FD450
Incomer 4 JK 04SH449 JK 04FH449100A 25kA TPMCCB HD 449 6 JK 06SH449 JK 06FH449
8 JK 08SH449 JK 08FH449
10 JK 10SH449 JK 10FH449
12 JK 12SH449 JK 12FH449
16 JK 16SH449 JK 16FH449
225A frame MCCB incomer Incomer 8 JK 08SH551 JK 08FH551160A 25kA TPMCCB HH 551 10 JK 10SH551 JK 10FH551
12 JK 12SH551 JK 12FH551
16 JK 16SH551 JK 16FH551
Incomer 8 JK 08SH552 JK 08FH552200A 25kA TPMCCB HH 552 10 JK 10SH552 JK 10FH552
12 JK 12SH552 JK 12FH552
16 JK 16SH552 JK 16FH552
Incomer 8 JK 08SH558 JK 08FH558225A 25kA TPMCCB HH 558 10 JK 10SH558 JK 10FH558
12 JK 12SH558 JK 12FH558
16 JK 16SH558 JK 16FH558
JK 06SD450
JK 16SH558
36
Orion general purpose enclosures IP65
The IP 65 Orion enclosures
These orion enclosures are ofmonobloc construction availablein metal or glass fibre reinforcedpolyester ( GRP).
They constitute a range of over50 enclosures of heights 300 to2050 mm and up to 850 mmwide.
These enclosures are flexibleand can be used for differenttypes of equipment with achoice of :- plain or perforated mounting
plates- DIN rail modular chassis kits
These enclosures allow :- installation of automationproducts for the control ofmachines or small processes- installation of non modular
products such as contactors,transformers, etc…
- cable termination anddistribution
Mounting plates Available in various sizes forinstallation of non modularequipment.
They can be fixed directly to theback of the enclosure or thedepth can be adjusted depending on the equipment.
Modular chassisAvailable in 8 sizes from 2 to 6row making up to 228 ❚ .
Designed for easy mounting ofmodular equipment. The chassiscan be both demounted andtilted.
Are supplied complete with frontcover and must be used withdepth adjustment slides.
Metal enclosuresOrion IP65
Polyester enclosuresOrion IP65
Choices of equipment :
Plain mounting plate
Perforated mountingplate
Chassis kits formodular devices
37
FL 55Z
Orion metalenclosures
Orion polyesterenclosures
mounting platesplain or perforated
Equipment kits for modulardevices
Orion general purpose enclosures IP65Selection chart
Orion metalenclosures
Orionpolyesterenclosures
plainmountingplates
perforatedmountingplates
height width depth IP 65, � IP 65, �
300 250 160 FL 01A FL 01B FL 41G FL 41P
350 300 160 FL 02A FL 02B FL 42G FL 42P
200 FL 03A -
500 300 200 FL 04A FL 04B FL 44G FL 44P
400 200 FL 05A FL 05B FL 45G FL 45P
650 400 200 FL 06A FL 06B FL 46G FL 46P
250 FL 07A -
650 500 250 FL 08A FL 08B FL 48G FL 48P
800 600 300 FL 09A FL 09B FL 49G FL 49P
950 600 300 FL 10A - FL 50G FL 50P
800 300 FL 11A - FL 51G FL 51P
1150 850 300 - FL 12B FL 56G -
1450 850 300 - FL 14B (1) FL 54G(upper part)+ FL 55G(bottom part)
-
1750 850 300 - FL 15B (1) FL 54G(upper part)+ FL 56G(bottom part)
-
2050 850 300 - FL 16B (1) FL 55G(upper part)+ FL 56G(bottom part)
-
depthadjustementslides
FL 51Z
FL 52Z
FL 53Z
FL 54Z
equipmentkit formodulardevices
-
FL 02M
FL 04M
FL 05M
FL 06M
FL 08M
FL 09M
FL 10M
FL 11M
-
-
-
-
in ❚
-
20 ❚
30 ❚
48 ❚
64 ❚
88 ❚
130 ❚
156 ❚
228 ❚
-
-
-
-
row
-
2
3
4
5
6
-
-
-
-
-
FL 02Z
FL 03Z
FL 04Z
FL 05Z
FL 06Z
-
-
-
-
(1) enclosure equipped with 2 superposed doors
blank frontcover
dimensions of enclosuresin mm
capacity
Orion steel enclosure 350 x 300 x 160 1 FL 52Awith glazed door 350 x 300 x 200 1 FL 53A& triangular centres 500 x 300 x 200 1 FL 54A
500 x 400 x 200 1 FL 55A650 x 400 x 200 1 FL 56A650 x 400 x 250 1 FL 57A650 x 500 x 250 1 FL 58A800 x 600 x 300 1 FL 59A950 x 600 x 300 1 FL 60A950 x 800 x 300 1 FL 61A
Orion metal enclosures IP65
38
Designation Dimensions Pack Cat.(H x W x D) qty Ref.
Orion steel enclosure 300 x 250 x 160 1 FL 01Awith plain door 350 x 300 x 160 1 FL 02A& triangular centres 350 x 300 x 200 1 FL 03A
500 x 300 x 200 1 FL 04A500 x 400 x 200 1 FL 05A650 x 400 x 200 1 FL 06A650 x 400 x 250 1 FL 07A650 x 500 x 250 1 FL 08A800 x 600 x 300 1 FL 09A950 x 600 x 300 1 FL 10A950 x 800 x 300 1 FL 11A
Orion steel enclosuresIP rating IP65 according toIEC529. - IK10earthed, isolation class I.Earthing bolts on both body anddoor.Removable gland plate at thebottom, made out of metal.gasket directly molded on thedoor.
Plain door equipped with one ortwo locks with triangular or double bit centres, located outof the sealed area.Reversible door, easilyremovable for drilling.4 studs in the back of the bodyfor mounting plate fastening.
colour RAL 7032� For technical information,
see page 78
Orion steel enclosure 300 x 250 x 160 1 FL 31Awith plain door 350 x 300 x 160 1 FL 32A& mounting plate 350 x 300 x 200 1 FL 33A& double bit centres 500 x 300 x 200 1 FL 34A
500 x 400 x 200 1 FL 35A650 x 400 x 200 1 FL 36A650 x 400 x 250 1 FL 37A650 x 500 x 250 1 FL 38A800 x 600 x 300 1 FL 39A950 x 600 x 300 1 FL 40A950 x 800 x 300 1 FL 41A
Accessories
key lock, 1 FL 92Zall metal enclosures and GRP h ≤ 800
key lock 1 FL 98ZGRP enclosures h ≥ 1150
square 8mm centre lock 2 FL 80Z
double bit 3mm centre lock 2 FL 95Z
spray paint - RAL7032 FZ 793
set of four metallic wall fixing 1 set FL 85Zbrackets
FL 05A
FL 05A
FL 08A
FL 92Z
FL 80Z
FL 85Z
FL 95Z
39
Orion polyester enclosure 350 x 300 x 160 1 FL 52Bwith glazed door 500 x 300 x 200 1 FL 54B& triangular centres 500 x 400 x 200 1 FL 55B
650 x 400 x 200 1 FL 56B650 x 500 x 250 1 FL 58B800 x 600 x 300 1 FL 59B1150 x 850 x 300 1 FL 60B
Orion polyester enclosures IP65
Designation Dimensions Pack Cat.(H x W x D) qty Ref.
Orion polyester enclosure 300 x 250 x 160 1 FL 01Bwith plain door 350 x 300 x 160 1 FL 02B& triangular centres 500 x 300 x 200 1 FL 04B
500 x 400 x 200 1 FL 05B650 x 400 x 200 1 FL 06B650 x 500 x 250 1 FL 08B800 x 600 x 300 1 FL 09B1150 x 850 x 300 1 FL 12B1450 x 850 x 300* 1 FL 14B1750 x 850 x 300* 1 FL 15B2050 x 850 x 300* 1 FL 16B
Orion polyester enclosure IP65made of glass reinforcedpolyester (GRP) exceptenclosure (300 x 250 x 160) made ofpolycarbonateIP65 according to IEC 529isolation class II according toIEC 536. IK10Body made out of one piece (upto height 800mm)
Canopies on top and bottomplain or glazed door equipped withone or two locks
2 doors one on top the otherbeginning at height 1450mmDoor easily removable for drilling.Gasket directly molded on thedoors.4 fixing bolts in the back of theenclosure for mounting plate
fasteningcolour RAL 7032
� For technical information,see page 79
Orion polyester enclosure 300 x 250 x 160 1 FL 31Bwith plain door 350 x 300 x 160 1 FL 32B& mounting plate 500 x 300 x 200 1 FL 34B& double bit centres 500 x 400 x 200 1 FL 35B
650 x 400 x 200 1 FL 36B650 x 500 x 250 1 FL 38B800 x 600 x 300 1 FL 39B
Accessories
key lock, 1 FL 92Zall metal enclosures and GRP h ≤ 800
key lock 1 FL 98ZGRP enclosures h ≥ 1150
square 8mm centre lock 2 FL 81Z
double bit 3mm centre lock 2 FL 97Z
spray paint - RAL7032 FZ 793
set of four polyester wall fixing 1 set FL 86Zbrackets
* enclosures with 2 doors
FL 08B
FL 08B
FL 14B
FL 92Z
FL 81Z
FL 86Z
FL 97Z
Perforated mouting plate, height 300 and width 250mm 1 FL 41Pmetallic zincked height 350 and width 300mm 1 FL 42P2mm thickness height 500 and width 300mm 1 FL 44Pfor enclosure... height 500 and width 400mm 1 FL 45P
height 650 and width 400mm 1 FL 46Pheight 650 and width 500mm 1 FL 48Pheight 800 and width 600mm 1 FL 49Pheight 950 and width 600mm 1 FL 50Pheight 950 and width 800mm 1 FL 51PM5 clip nut for perforated plate 25 UC 969
Orion enclosure accessories
40
Designation Pack Cat.qty Ref.
Plain mouting plate, steel height 300 and width 250mm 1 FL 41Gsheet 2mm thickness, height 350 and width 300mm 1 FL 42Galu zincked height 500 and width 300mm 1 FL 44Gfor enclosure... height 500 and width 400mm 1 FL 45G
height 650 and width 400mm 1 FL 46Gheight 650 and width 500mm 1 FL 48Gheight 800 and width 600mm 1 FL 49Gheight 950 and width 600mm 1 FL 50Gheight 950 and width 800mm 1 FL 51Gheight 1150 and width 850mm 1 FL 56Gheight 1450 and width 850mm, 1 FL 54Gupper partheight 1450 and width 850mm, 1 FL 55Gbottom partheight 1750 and width 850mm, 1 FL 56Gbottom part
Blank front cover for for enclosure width 300mm 4 FL 02Zmodular chassis for enclosure width 400mm 4 FL 03Z
for enclosure width 500mm 4 FL 04Z for enclosure width 600mm 4 FL 05Z for enclosure width 800mm 4 FL 06Z
Depth adjustement slides for enclosure depth 160mm 1 FL 51Zfor Orion enclosures (set of 4 pieces)
for enclosure depth 200mm 1 FL 52Z (set of 4 pieces)for enclosure depth 250mm 1 FL 53Z (set of 4 pieces)for enclosure depth 300mm 1 FL 54Z (set of 4 pieces)for polyester enclosure, 1 FL 55Zheight ∆ 1150mm (set of 4 pieces)
Chassis for modular devices* height 350 and width 300mm 1 FL 02M2 row of 10 modulesheight 500 and width 300mm 1 FL 04M3 row of 10 modulesheight 500 and width 400mm 1 FL 05M3 row of 16 modulesheight 650 and width 400mm 1 FL 06M4 row of 16 modulesheight 650 and width 500mm 1 FL 08M4 row of 22 modulesheight 800 and width 600mm 1 FL 09M5 row of 26 modulesheight 950 and width 600mm 1 FL 10M6 row of 26 modulesheight 950 and width 800mm 1 FL 11M6 row of 38 modules
* must be used with depthadjustment slides
FL 45G
FL 45P
FL 05M
FL 04Z
FL 52Z
41
Metal enclosure IP65 Monaco plus
- IP65- colour grey RAL 7032 - monobloc enclosure- versions: - wall mounting- floor standing- electro-zinc coated sheet metalthickness 15/10 - inside fittings for mounting plates, tiltable chassis, internaldoor- door with continuousexpanded polyurethane seal,watertight lock, four closurepoints
- cable entrances on top andbottom- wall fixing by means ofbrackets (ref. 17499 )- epoxy polyester texturedpowder paint thickness 80micron- installation in harsh or riskyenvironments in case of fire acc.to IEC 64-8/7 and AD-FT environments to IEC 64-2IV edition
� For technical information,see page 71
View of the completed enclosure :
Phase 1: choice of the enclosure 17475 1 Monaco plus withtransp.door
17491 1 plinth for Monaco plus
Phase 2 : choice of the equipment 17644 1 internal chassis frame
17584 1 internal door
16367 6 modular kit
16377 2 plain plastic cover
17674 2 depth adjustment slides
Equipment examples Monaco plus
Example of distribution enclosure with Monaco plus IP65 :
42
After having identified the field ofapplication and the type ofinstallation for the enclosurethe choice of the size will bemade according to the equip-ment which will be installed.
The references can be easilychoosen from the selection chartpages 36 - 37
Reference Quantity Description
View of the completed enclosure :
Phase 1: choice of the enclosure 17470 1 Monaco plus with transp.door
17490 1 plinth for Monaco plus
Phase 2 : choice of the equipment 17514 1 plain metal mounting plate
17594 1 internal door
17674 1 depth adjustment slides
17678 1 brackets
Equipment examples Monaco plus
Example of automation application with Monaco plus IP65 :
43
After having identified the field ofapplication and the type ofinstallation for the enclosurethe choice of the size will bemade according to the equip-ment which will be installed.
The references can be easilychoosen from the selection chartpages 36 - 37
Reference Quantity Description
Selection chartGeneral purpose enclosures Monaco plus IP65
44
1200 1 8 17504
Plain mountingplates (a)
-17584
Internal metaldoor (b)
Internal chassisframe (b)
1500 1 10 17506 -17586
1800 1 12 17508 -17588
1200 2 8 17514 1764417594
1500 2 10 17516 1764617596
1800 2 12 17518 1764817598
1200 3 8 17524 1765417604
1500 3 10 17526 1765617606
1800 3 12 17528 1765817608
250
Heighth
mm
Internaldimensions
Widthb
mod. 250mm
Heighth
mod. 150mm
Widthb
mm
250
250
500
500
500
750
750
750
(a) to be fixed on depth adjustment slides ref. 17674 together with brackets ref. 17678
(b) to be fixed on depth adjustment slides ref. 17674 with specific supplied brackets
45
- - - - 1650516500
- - - - 1650516500
- - - - 1650516500
24+1 16377 16387 16397 1654616542
24+1 16377 16387 16397 1654616542
24+1 16377 16387 16397 1654616542
36+2 16375 16385 16395 1650916504
-
Number ofmodules
Plastic front coverswith cutout & Din rails
Plastic frontcover plain
Metal frontcover plain
Metal plates for equipment mounting
Din rails for equipment mounting
Height1 mod. 150
Height2 mod. 150
Height2 mod. 150
Height1 mod. 150
-
-
16367
16367
16367
16365
36+2 16375 16385 16395 165091650416365
36+2 16375 16385 16395 165091650416365
Monaco plus IP65 metal enclosure
46
Height Width x Depth Pack Cat.qty Ref.
Enclosure with 600 x 350mm 1 17450plain door 2 mod. 250mmheight 1300mm8 mod 150mm 850 x 350mm 1 17455
3 mod. 250mm
Enclosure with 600 x 350mm 1 17452plain door 2 mod. 250mmheight 1600mm10 mod 150mm 850 x 350mm 1 17456
3 mod. 250mm
Enclosure with 600 x 350mm 1 17454plain door 2 mod. 250mmheight 1900mm12 mod 150mm 850 x 350mm 1 17458
3 mod. 250mm
Enclosure with 600 x 350mm 1 17470transparent door 2 mod. 250mmheight 1300mm8 mod 150mm 850 x 350mm 1 17475
3 mod. 250mm
Enclosure with 600 x 350mm 1 17472transparent door 2 mod. 250mmheight 1600mm10 mod 150mm 850 x 350mm 1 17476
3 mod. 250mm
Enclosure with 600 x 350mm 1 17474transparent door 2 mod. 250mmheight 1900mm12 mod 150mm 850 x 350mm 1 17478
3 mod. 250mm
� For technical information,see page 80
17450
17470
47
Monaco plus IP65 metal enclosures
Height Designation Pack Cat.qty. Ref.
Plinth for enclosures width
height : 100mm 600mm 1 17490
850mm 1 17491
Depth adjustment slides 4 slides 5 17674
in galvanised metal
to be fixed on sides andbottom of the enclosure
to fix internal door, mounting plates,tiltable chassis
Brackets set of 4 10 17678
to fix plain mounting plateson depth adjustment slides
Wall fixing brackets set of 4 brackets 10 17499in galvanised metal
Door handle 5 17680
without lock insert
Lock inserts triangular 8mm 5 17684
for door handle double bit 3mm 5 17685centre lock
square 8 x 8mm 5 17686
square 6x 6mm 5 17687
key lock 5 17688
� For technical information,see page 81-83
17490
17674
17678
17499
17680
17684 - 17685 - 1768617687 - 17688
48
FW metal enclosures IP43
Designation width x depth Number Pack Cat.of sections qty. Ref.
Height 500mm
1 x 3 rows, 36I 300 x 140mm 1 1 FW 31
2 x 3 rows, 72I 550 x 140mm 2 1 FW 32
3 x 3 rows, 108I 800 x 140mm 3 1 FW 33
4 X 3 rows, 144I 1050 x 140mm 4 1 FW 34
Height 650mm
1 x 4 rows, 48I 300 x 140mm 1 1 FW 41
2 x 4 rows, 96I 550 x 140mm 2 1 FW 42
3 x 4 rows, 144I 800 x 140mm 3 1 FW 43
4 X 4 rows, 192I 1050 x 140mm 4 1 FW 44
Height 800mm
1 x 5 rows, 60I 300 x 140mm 1 1 FW 51
2 x 5 rows, 120I 550 x 140mm 2 1 FW 52
3 x 5 rows, 180I 800 x 140mm 3 1 FW 53
4 X 5 rows, 240I 1050 x 140mm 4 1 FW 54
Height 950mm
1 x 6 rows, 72I 300 x 140mm 1 1 FW 61
2 x 6 rows, 144I 550 x 140mm 2 1 FW 62
3 x 6 rows, 216I 800 x 140mm 3 1 FW 63
4 X 6 rows, 288I 1050 x 140mm 4 1 FW 64
distribution enclosures- extra slim depth 140 mm- insulation class : II - IP43
3 to 6 rows, 1 to 4 sections,from 36 to 288Ifor distribution < 125A incommercial installationsfor modular devices on DIN rails,max. depth 96mm, shouldermeasur. 47mm
ingress protection :IP43 to IEC 529
class II , additional internalinsulation by polystyrene plates(P.S.), glow wire test 960°Cextinguishing = 5 sec.
rated insulated voltage :Ui : 400 V ~In : 125A – three phase 380V ~
- enclosure manufactured fromsheet metal
- colour RAL 9002- polyester front covers width 1
section- 12 modules per row- 125 mm between DIN rails- 63 A connection assembly
with earth and neutral bar ineach section
options :- trimming frame- lock with key- separators- connection assembly TP+N63A- sealing kit
� For technical information,see page 84
FW 51
FW 52
FW 52
Separators vertical, for enclosure height : 500mm 1 UT 44A650mm 1 UT 44B800mm 1 UT 44C950mm 1 UT 44D
to separate internally either sections (vertical) horizontal, width 1 section 1 UT 44Eor rows (horizontal )
Plastic lock 1 FZ 598replacement
Accessories - FW metal enclosures
49
Designation Characteristics Pack Cat.qty Ref.
Connection assembly 3 x (1 x 25 + 2 x 16 + 3 x 10) 1 F 010TP + N 63A N : 1 X 25 + 3 X 16 + 7 X 10
to be fitted on the uprights of the 1 section wide chassis
Designation Height Width Section Cat.Ref.
Lowered DIN rail width 1 section of 12I 1 UT 22B
lowered by 21 mm for terminals or devices biggerthan 47 mm with a shoulder measurement = 68 mm
Cable entry plate 1 FZ 403replacement
Lock with 2 key, for retrofitting 1 FZ 597
Transparent door for enclosures FW 42N 1 FZ 104only for 2 sections enclosures FW 52N 1 FZ 106width 550 mm
Blanking strip of 12I 10 P 012with fi modules premarked
strip of 18I ,lockable 10 JP 015premarked for 10, 12 and 18I
Trimming frame 500 300 FW 31 FZ 301for flush mounting 550 FW 32 FZ 302
800 FW 33 FZ 303adjustment to level of 1050 FW 34 FZ 304plaster surface : 45mm max. 650 300 FW 41 FZ 306
550 FW 42 FZ 307800 FW 43 FZ 3081050 FW 44 FZ 309
800 300 FW 51 FZ 311550 FW 52 FZ 312800 FW 53 FZ 3131050 FW 54 FZ 314
950 300 FW 61 FZ 316550 FW 62 FZ 317800 FW 63 FZ 3181050 FW 64 FZ 319
F 010
UT 22B
FZ 403
FZ 597
FZ 598
FZ 104
FZ 307
50
The Vega D system of enclosures
The Vega D enclosures are madefor electrical installation up to160A.
3 types of enclosures areavailable :- surface mounting IP4,- surface mounting IP5.- flush mounting IP4,The surface and flush mountingenclosures are available in twoconfigurations :- modular distribution enclosure- enclosure to be completed The IP5 enclosures are onlyavailable in the configuration tobe completed
These enclosures are factoryassembled.
Modular distributionenclosuresequipped with units for modulardevicesfrom 2 to 7 rows ( 48 to 168 ❚ ).
Enclosures to be completedequipped with :● units for modular devices 1 to
5 rows (24 to 120❚ ) ● space for an internal module :- for main switch- for mccb- for electronic meter- for modular devices- with perforated plate
The Vega D enclosures combinesheet metal and injected plasticso as to get a light and strongenclosure.An additional internal insulationguarantees class II without specific constraints whenwiring.
Colour RAL 9002
Options :- internal module- plain or transparent door- connection assembly- locks- stepped terminals
IEC 60 695-2-1/0 and 60 695-2-1/1
Modular distribution enclosuressurface 2 to 7 rows72 to 168 ❚
Enclosures to be completedsurface 0 to 5 rows24 to 120 ❚
flush 0 to 5 rows24 to 120 ❚
flush 2 to 7 rows48 to 168 ❚
plain or transparent door
equipment units
Accessories
weatherproof 0 to 5 rows24 to 168 ❚
51
Vega D surface mounting IP41
Vega D surface mounting IP54
Designation Chacracteristics +
Modular distribution enclosure without door
w. 550 x d. 185 mm
2 rows (48 ❚ ) 2 (1x25+7x16+9x10�)3 rows (72 ❚ ) 2 (1x25+7x16+9x10�)4 rows (96 ❚ ) (1x25+7x16+9x10 +
1x25+11x16+13x10�)5 rows (120 ❚ ) (1x25+7x16+9x10 +
1x25+11x16+13x10�)6 rows (144 ❚ ) (1x25+11x16+13x10�)
1(1x25+7x16+9x10�)7 rows (168 ❚ ) 2(1x25+11x16+13x10�)
1(1x25+7x16+9x10�)
Pack.qty.
Height Cat.ref.
11
11
1
1
400 mm550 mm
700 mm850 mm
1000 mm
1150 mm
FD 22DFD 32D
FD 42DFD 52D
FD 62D
FD 72D
Enclosure to be completed without door
w. 550 x d. 185 mm
with an empty space for internal module (1x25+7x16+9x10�)
+ 1 row (24 ❚ ) 2 (1x25+7x16+9x10�)+ 2 rows (48 ❚ )(1x25+7x16+9x10 +
1x25+11x16+13x10�)+ 3 rows (72 ❚ )(1x25+7x16+9x10 +
1x25+11x16+13x10�)+ 4 rows (96 ❚ )(1x25+11x16+13x10�)
1(1x25+7x16+9x10�)+ 5 rows (120 ❚ )2(1x25+11x16+13x10�)1(1x25+7x16+9x10�)
1
11
1
1
1
400 mm
550 mm700 mm
850 mm
1000 mm
1150 mm
FD 22A
FD 32AFD 42A
FD 52A
FD 62A
FD 72A
FD 52D
FD 52A
The Vega D surface mountingenclosures is made of 3 distinc-tive parts :- a U shaped bottom withremovable cable entries on topand bottom allowing an easieraccess to fixing points and wire circulation. Cable of larger sec-tion can be fixed on it with cableties.
- a removable chassis withuprights and units for modulardevices (24 ❚ per row), the frontplates being fixed directly on thechassis
- a finishing frame, fixed on theU shaped bottom, which willaccept a plain or transparentdoor
Additional brass terminalswithout base can be added onthe connection assemblies fittedin the enclosures.
IP30 / IK 07 without doorIP41 / IK07 with doorclass II
IEC 60 695-2-1/0 and 60 695-2-1/1
� For technical information see page 85
Designation Characteristics + Pack.qty.
Height Cat.ref.
Enclosures to be completed with door
w. 550 x d. 218 mm
(1x25+8x16+8x10�)
+ 1 rgs (24 ❚ ) 2(1x25+8x16+8x10�)
+ 2 rgs (48 ❚ ) (1x25+8x16+8x10�)(1x25+11x16+13x10�)
+ 3 rgs (72 ❚ ) (1x25+8x16+8x10�)(1x25+11x16+13x10�)
+ 4 rgs (96 ❚ ) 2(1x25+11x16+13x10�)1(1x25+8x16+8x10�)
+ 5 rgs (120 ❚ ) 2(1x25+11x16+13x10�)1(1x25+8x16+8x10�)
1
1
1
1
1
1
500 mm
650 mm
800 mm
950 mm
1100 mm
1250 mm
FV 22A
FV 32A
FV 42A
FV 52A
FV 62A
FV 72AFV 62A
Delivered with :- 1 door- 4 external wall fixing brackets- 4 weatherproof cable entries
Additional brass terminalswithout base can be added onthe connection assemblies fittedin the enclosures.
The weatherproof IP54 Vega Denclosure is made of 2distinctive parts :- an enclosure body with adoor, made of 15/10 galvanisedsheet steel, powder coated- a removable chassis withuprights and units for modulardevices (24❚ per row), the front plates being fixeddirectly on the chassis.
IP54 / IK10 with doorclass II
IEC 60 695-2-1/0 and 60 695-2-1/1
� For technical information see page
52
Vega D flush mounting IP41
Designation Characteristics +
Modular distribution enclosure without door
w. 600 x d. 152 mmframe height 40 mm
these enclosures will not acceptthe internal modules from page49
2 rows (48 ❚ ) (1x25+7x16+9x10�)
3 rows (72 ❚ ) 2 (1x25+7x16+9x10�)
4 rows (96 ❚ ) (1x25+7x16+9x10 +1x25+11x16+13x10�)
5 rows (120 ❚ ) (1x25+7x16+9x10 +1x25+11x16+13x10�)
6 rows (144 ❚ ) 2(1x25+11x16+13x10�)1(1x25+7x16+9x10�)
7 rows (168 ❚ ) 2(1x25+11x16+13x10�)1(1x25+7x16+9x10�)
Pack.qty.
Height Cat.ref.
1
1
1
1
1
1
500 mm
650 mm
800 mm
950 mm
1100 mm
1350 mm
FU 22D
FU 32D
FU 42D
FU 52D
FU 62D
FU 72D
Enclosure to be completedwithout door
w. 600 x d. 182 mmframe height 70 mm
+ 1 row (24 ❚ ) 2 (1x25+7x16+9x10�)
+ 2 rows (48 ❚ )(1x25+7x16+9x10 +1x25+11x16+13x10�)
+ 3 rows (72 ❚ )(1x25+7x16+9x10 +1x25+11x16+13x10�)
+ 4 rows (96 ❚ )2(1x25+11x16+13x10�)1(1x25+7x16+9x10�)
+ 5 rows(120 ❚ )2(1x25+11x16+13x10�)1(1x25+7x16+9x10�)
1
1
1
1
1
1
500 mm
650 mm
800 mm
950 mm
1100 mm
1350 mm
FU 22A
FU 32A
FU 42A
FU 52A
FU 62A
FU 72A
FU 62D
FU 62A
- a removable chassis withuprights andunits for modular devices (24 ❚
per row), the front plates beingfixed directly on the chassis.The modular distribution enclo-sures are fitted with specificinternal modules.- a metallic finishing frame of40mm (modular distributionenclosures) or 70mm (enclosures
The flush mounting Vega Denclosures can be installed in brick or partition walls (with aspecific kit available as anoption) and is made of 3 distinc-tive parts :- a metallic flush mounting boxdepth 110 mm with insulatedcable entries on top and bottom
to be completed) fixed on theflush box by means of 4 screws.This frame will accept a plain ortransparent door.Additional brass terminalswithout base can be added onthe connection assemblies fittedin the enclosures.
IEC 60 695-2-1/0 and 60 695-2-1/1
IP 30 / IK 07 without doorIP 41 / IK 07 without doorclass II
� For technical information see page 85
53
Vega D accessories
Internal module for enclosures to be completed (except FU—D serie)
for h125 n/e mccb, switcheswith visible contact indication +elevation for modular devices
for h160n/e mccb-horizontal
1
1
UK 22A1
UK 22B2
UJ 22A
UJ 22E
Internal modulefor modular devices
delivered with identificationstrip
2 rows : 2 x 24 ❚sans goulotte de câblage
width 500 mm
1
1
UJ 22A
UD 22B3
Internal module for terminals
module includes 2 horizontal DIN rails,depth adjustable
2 sectionswidth 500 mm2 rows 2 x 22 ❚
1
1
300 mm UJ 22D
UD 22A5
Internal module withperforated platefor enclosures to be completed (except FU—D serie)
- 1 perforated plate- clip-nuts and screws
width 500 mm
plate dimensions : l. 415 x h. 235
1
1
UJ 22E
UD 22C2
UG 22F1
UK 22A1
Transparent doors reversible for surface and flushenclosures
sheet metal, powder coated, 3mm hardened glass, lock
to grant IP41
for enclosures: FD 22D, FD 22AFU 22D, FU 22AFD 32D, FD 32AFU 32D, FU 32AFD 42D, FD 42AFU 42D, FU 42AFD 52D, FD 52AFU 52D, FU 52AFD 62D, FD 62AFU 62D, FU 62AFD 72D, FD 72AFU 72D, FU 72A
1
1
1
1
1
1
350 mm
500 mm
650 mm
800 mm
950 mm
1100 mm
FD 22T
FD 32T
FD 42T
FD 52T
FD 62T
FD 72T
Plain doors reversible for surface and flushenclosures
sheet metal, powder coated,
to grant IP41
for enclosures : FD 22D, FD 22AFU 22D, FU 22AFD 32D, FD 32AFU 32D, FU 32AFD 42D, FD 42AFU 42D, FU 42AFD 52D, FD 52AFU 52D, FU 52AFD 62D, FD 62AFU 62D, FU 62AFD 72D, FD 72AFU 72D, FU 72A
1
1
1
1
1
1
350 mm
500 mm
650 mm
800 mm
950 mm
1100 mm
FD 22P
FD 32P
FD 42P
FD 52P
FD 62P
FD 72P
FD 52T
FD 52P
Designation Characteristics Pack.qty.
Cat.ref.
Height
54
Vega D accessories
UT 50B
UT 50C
UT 52A
Designation Characteristics
Locks
to replace standard lock
lock with key n° 1242E
lock with key n° 405
lock with key n° 455
male square 7mm centre
male triangular centre 7mm
double bit 3mm centre
Cat.ref.
Pack.qty.
Cat.ref.
FZ 497
FZ 452
FZ 453
FZ 451
FZ 450
FZ 449
1
1
1
1
1
1
FZ 507
FZ 526
FZ 527
FZ 503
FZ 502
FZ 501
Wire guide
to be fixed on the side of the internal moduleas vertical wire guide
cannot be fixed in enclosures FU 22D to FU 72D
fixing on uprights steps of 75mmdelivered with fixing screw
6 sets
1 set =8 pieces
UT 50B
Cover for wire guide
for wire guide UT 50B
20lentgh 2m UT 50C
Horizontal wire duct
delivered with cover.
cannot be fixed in enclosures FU 22D to FU 72D
length 2 sections (500 mm)
width 31 mmheigth 85 mm
10 UT 52A
Supports for fixinghorizontal wire duct onenclosures uprights atdifferent levels
10 sets
1 set =2 pieces
UT 50A
Connection assembliesfor IP4 enclosures
1 Ph + N 63 A
3 Ph + N 63 A
1 Ph + N 90 A
2 x (3 x 16 + 4 x 10�)
3 x (3 x 16 + 2 x 10�)1 x (5 x 16 + 6 x 10�)
supply : 1 x 25�, 90 Aderivation : 4 x 16�, 63 A
1
1
1
VZ 708
VZ 709
VZ 712
Partition wall mounting kitfor flush mounting enclosures
allows quick fixing of the flush box in a partition wall
1 set = 4 screws + 4 fixing brac-kets
1 set VZ 405
VZ 405
VZ 708
VZ 709
FZ 597
FZ 451
FZ 450
55
Vega D accessories
KJ 01B
KJ 01C
KJ 01D
JP 002
FZ 794
Designation Characteristics Pack.qty.
Cat.ref.
Cable entriesreplacement
for IP4 enclosures
top or bottom
with round marks for cables and tubes
with rectangular marksfor trunking
10
10
VZ 706
VZ 707
Blanking clip width 1/2 ❚ (8,7 mm)
1 ❚ (17,5 mm)
strip length 24 ❚
50
50
P 031
P 032
10 JP 002
Transparent pocketfor wiring diagrammesize A4 - self adhesive
to be fixed inside the plain door 10 FZ 794
Spray paintfor the metallic partsof the Vega D enclosures
colour RAL9002 1 FZ 792
Terminal blocksfixing by clip on DIN rail
delivered with :� insulated back plate� transparent protectionfront cover
In : by 40°C
In 100A – two poles Icc : 29KAconnectors on each terminal :incoming : 1x35� flexible,outgoing : 1x25 + 10x16� flexible
w. 129 (7,5 ❚ ) x h. 86 x d. 44 mm
1 KJ 01A
Distribution blockssingle polemonobloc, insulated, grey colour
fixing by clip on DIN rail
connection capacity per block- 160A (width 35mm)incoming : 1x70�, outgoing 6x16�
4 KJ 02C
In 80A – four poles Icc : 21KAconnectors on each terminal :incoming : 1x16� flexible,outgoing : 8x10� flexible
w. 88 (5 ❚ ) x h. 86 x d. 44 mm
1 KJ 01B
In 125A – four pole Icc : 29KAconnectors on each terminal :incoming : 1x35� flexible,outgoing : 1x25 + 10x16� flexible
w. 129 (7,5 ❚ ) x h. 86 x d. 44 mm
1 KJ 01C
modular shapemonobloc, insulated protectionfor each phase terminal.Cover removable with a tool.
In 160A – four poles Icc : 20KAconnectors on each terminal :incoming : 4x50� flexible,outgoing : 3x35�, 8x16� flexiblew. 162 (9,5 ❚ ) x h. 87 x d. 60 mm(modular shoulder measurement45mm)
1 KJ 01D
4 x KJ 02A
VZ 706
P 032 P 031
58 Insulated busbars - prong59 Insulated busbars - fork60 Brass terminals ≤ 60A61 Connection blocks62 Distribution and terminals blocks63 Rail mounted terminals In ≤ 80A64 Rail mounted terminals - accessories
Connection systems
57
Insulated busbars - prong
58
Designation Section In Width Pack Cat.in I qty Ref.
1 pole, 1I step
brown insulation (phase) 10 63A 13I 50 KB 163P
blue insulation (neutral) 10 63A 13I 50 KB 163N
without insulation 10 63A 13I 50 KB 163I
insulated 20 100A 57I 10 KB 190B
20 100A 24I 10 KB 190C
2 poles, 2I step
insulated 10 63A 12I 10 KB 263A
10 63A 24I 10 KB 263C
16 80A 56I 10 KB 280B
3 poles, 3I step
insulated 10 63A 12I 10 KB 363A
10 63A 57I 20 KB 363B
10 63A 24I 10 KB 363C
16 80A 12I 25 KB 380A
16 80A 57I 10 KB 380B
4 poles, 4I step
insulated 10 63A 12I 10 KB 463A
10 63A 24I 10 KB 463C
16 80A 12I 25 KB 480A
16 80A 56I 10 KB 480B
Cable connectors
connection from top In 63A for cables : 25 mm≈ 10 KF 81A
for cables : 2 x 16 mm≈ 10 KF 82A
connection from side In 63A for cables : 25 mm≈ 10 KF 83A
End cap cover
for single pole busbars KB 163P 1 set KZ 021and KB 163N
for double pole busbars, 10mm≈ 1 set KZ 022
for triple pole busbars 10 or 16mm≈ 1 set KZ 023
for four pole busbars 10 or 16mm≈ 1 set KZ 024
KB 163N
KB 163P
KB 190C
KB 263A
KB 363A
KB 463A
KF 81A
KF 83A
KZ 021
KZ 023
KF 82A
Insulated busbars - fork
Designation Section In Width Pack Cat.in I qty Ref.
1 pole, 1I step 10 63A 12I 100 KD 163A
10 63A 56I 50 KD 163B
16 80A 12I 100 KD 180A
16 80A 56I 50 KD 180B
20 100A 56I 10 KD 190B
2 poles, 2I step
insulated 10 63A 12I 10 KB 263A
10 63A 24I 10 KB 263C
16 80A 56I 10 KB 280B
3 poles, 3I step
insulated 10 63A 12I 10 KB 363A
10 63A 57I 20 KB 363B
10 63A 24I 10 KB 363C
16 80A 12I 25 KB 380A
16 80A 57I 10 KB 380B
4 poles, 4I step
insulated 10 63A 12I 10 KB 463A
10 63A 24I 10 KB 463C
16 80A 12I 25 KB 480A
16 80A 56I 10 KB 480B
Cable connectors
connection from top In 63A for cables : 25 mm≈ 10 KF 81A
for cables : 2 x 16 mm≈ 10 KF 82A
connection from side In 63A for cables : 25 mm≈ 10 KF 83A
End cap cover
for double pole busbars, 10mm≈ 1 set KZ 022
for triple pole busbars 10 or 16mm≈ 1 set KZ 023
for four pole busbars 10 or 16mm≈ 1 set KZ 024
KD 190B
KD 263A
KD 363A
KD 463A
KF 81A
KZ 023
KF 82A
59
Brass terminals ≤ 60A
60
Connections Terminals with support without supportnumber + section pack neutral earth phase Pack Cat.
qty. cat. ref. cat.ref. cat. ref. qty. ref.
2x16 + 2x10▫ 50 - - KM 04L 10 K 1404 connectionslength 30mm
4x16 + 4x10▫ 20 - - KM 08L - -8 connectionslength 30mm
3x16 + 4x10▫ 50 KM 07N KM 07E KM 07L 10 K 1427 connectionslength 49mm
5x16 + 5x10▫ 20 KM 10A KM 10B KM 10C 10 K 14310 connectionslength 67mm
5x16 + 6x10▫ 20 KM 11N KM 11E KM 11L 10 K 14411 connectionslength 73mm
2x16 (double drive) + 8x10 20 KM 10N KM 10E KM 10L 10 K 14510 connectionslength 69mm
6x16 +7x10▫ 20 KM 13N KM 13E - 10 K 14813 connectionslength 85mm
1x25 +5x16 + 5x10▫ 20 - KM 11B - 10 K 15111 connectionslength 85mm
1x25 +8x16 + 8x10▫ 20 KM 17N KM 17E - 10 K 15617 connectionslength 121mm
1x25 +11x16 + 13x10▫ 20 KM 25N KM 25E - 10 K 15825 connections 2 supportslength 169mm
1x25 +8x16 + 29x10▫ long length length 242mm 10 K 159terminals(without support)
1x25 +16x16 + 61x10▫ fixing on the length 482mm 10 K 160flat bar12 x 2 with supports(see below)
1x25 + 3x16 + 129x10▫ length 992mm 10 K 162
supports for K140 blue support for neutral 10 KZ 012to K162 terminalsinsulating material green / yellow support for earth 10 KZ 013M4 x 8 fixing screws
beige supports (see below) 10 KZ 014
Rail clip mounting on DIN rail 50 KZ 060for fixing terminals onDIN rail not for : KM 08LKM 10A, KM 10B, KM 10C,KM 10N, KM 10E, KM 10L horizontally
DescriptionInsulated support can be fittedsupport for neutral / phaseconnections
Technical databrass terminals with / without
earth = green / yellow supportphase = beige supportneutral = blue support
in DIN rail with A 045 rail clip orflat bar 12x12mm
KM 04L
KM 08L
KM 07N
KM 10E
KM 13N
KM 11B
KM 25N
KM 25N
K 151
K 151
K 159
KZ 012
KZ 060
Connection blocks 1 pole 2 fi 20 K 018connection on each poleincoming : 2 x 25▫ l. 34 x h. 50 x w. 52mm4 separate outgoing ways : 16▫
2 pole 4 10 K 023
l. 64 x h. 50 x w. 52mm
4 pole 7 5 K 024
l. 121 x h. 50 x w. 62mm
5 pole 8 fi 5 K 025
l. 150 x h. 50 x w. 62mm
Connection blocks
61
Designation Characteristics Width in Pack Cat.17.5mm qty. ref.
Application :connection blocks 16▫ to 35▫ toconnect incoming cables andcontinue live feed.
technical data :connection :incoming : 2 x 25▫ or 2 x 35▫outgoing : 16▫ or 25▫mounting : fixing on DIN rail
connection blocks include :one insulated support, brassconnection blocks withremovable antishear plates toenable the incoming cables tobe connected without cutting.
Connection blocks 1 pole 2 fi 10 K 037connection :incoming : 2 x 35▫ l. 37 x h. 30 x w. 47mm4 separate outgoing ways : 25▫
K 018
K 025
K 037
Distribution and terminal blocks
62
Designation Characteristics Pack.qty.
Cat.ref.
250 A :incoming : 1x95�,outgoing :2x25�, 5x16�, 4x10�
445 mm KJ 02A380023
400 A :incoming : 1 x 150�,outgoing:2x25�, 5x16�, 4x10�
445 mm KJ 02B380024
Distribution blocks
fitting on DIN rail
for connections :25 to 95�
35 to 150�
1
1
25 mm
31 mm
KR 95P388034
KR 15P388035
KJ 01B
KJ 01C
KJ 01D
4 x KJ 02A
KR 15PKR 95P
Terminal blocksfixing by clip on DIN rail
delivered with :� insulated back plate� transparent protectionfront cover
In : by 40°C
In 100A – two poles Icc : 29KAconnectors on each terminal :incoming : 1x35� flexible,outgoing : 1x25 + 10x16� flexible
w. 129 (7,5 ❚ ) x h. 86 x d. 44 mm
1 KJ 01A
Distribution blockssingle polemonobloc, insulated, grey colour
fixing by clip on DIN rail
connection capacity per block160A (width 35mm)incoming : 1x70�, outgoing 6x16�
4 KJ 02C
In 80A – four poles Icc : 21KAconnectors on each terminal :incoming : 1x16� flexible,outgoing : 8x10� flexible
w. 88 (5 ❚ ) x h. 86 x d. 44 mm
1 KJ 01B
In 125A – four pole Icc : 29KAconnectors on each terminal :incoming : 1x35� flexible,outgoing : 1x25 + 10x16� flexible
w. 129 (7,5 ❚ ) x h. 86 x d. 44 mm
1 KJ 01C
modular shapemonobloc, insulated protectionfor each phase terminal.Cover removable with a tool.
In 160A – four poles Icc : 20KAconnectors on each terminal :incoming : 4x50� flexible,outgoing : 3x35�, 8x16� flexiblew. 162 (9,5 ❚ ) x h. 87 x d. 60 mm(modular shoulder measurement45mm)
1 KJ 01D
Phase terminals 0.5 - 2.5 mm2 35A 5 100 KR 02F750 V~beige colour 0.5 - 4 mm2 35A 6 100 KR 04F
0.5 - 6 mm2 63A 8 50 KR 06F
1.5 - 16 mm2 85A 10 50 KR 16F
2.5 - 35 mm2 168A 16 25 KR 35F
70mm2 202A 22 10 KR 70F
Neutral terminals 0.5 - 2.5 mm2 35A 5 100 KR 02N750 V~
blue colour 0.5 - 4 mm2 35A 6 100 KR 04N
0.5 - 6 mm2 63A 8 50 KR 06N
1.5 - 16 mm2 85A 10 50 KR 16N
2.5 - 35 mm2 168A 16 25 KR 35N
Rail mounted terminals In ≤ 80A
63
Designation Size of the In (A) Width in Pack Cat.conductor mm qty. ref.
Earth terminals 0.5 - 2.5 mm2 5 100 KR 02Hgreen / yellow colour
0.5 - 4 mm2 6 100 KR 04H
0.5 - 6 mm2 8 50 KR 06H
1.5 - 16 mm2 10 50 KR 16H
2.5 - 35 mm2 16 25 KR 35H
Dimensions :
Terminal A B0.5 to 16▫ 60 39.52.5 to 35▫ 60 55.5
rail mounted terminals with capacityup to 35mm2.
working temperature : up to 120°C
mounting and dismounting either bytop or bottom.
high tightening capacity :is suitable for use with 2 wires
KR 35F
KR 35N
Rail mounted terminals - accessories
64
Designation Characteristics Width Pack Cat.in I qty Ref.
End plates 1.5 50 KZ 025beige For : KR 02F, KR 02N
KR 06F, KR 16F
For KR 35F 1.5 20 KZ 031
End stops insulated materialfor terminals ≥ 16mm2 50 KZ 033
for terminals ≥ 35mm2 50 KZ 034
Marking labels 10 x 1 - 50 1 set KZ 015
enable individual 10 x 51 - 100 1 set KZ 016circuit identification
10 x 101 - 150 1 set KZ 017
10 x 151 - 200 1 set KZ 018
10 x 201 - 250 1 set KZ 019
Transversal connector for 10 terminals10 connection points KR 02F 50 KZ 035
KR 04F 50 KZ 036
KR 06F 50 KZ 037
KZ 025 KZ 031
KZ 034 KZ 033
KZ 015
KZ 035
66 Ingress protection67 Type tested asemblies68 30V and Vector IP65 enclosures70 Volta flush enclosures71 Volta surface mounting - Gamma dimensions72 Golf dimensions73 VL enclosures dimensions74 Invicta - Consumer units with 100A SP busbar
Invicta - Consumer units without busbar75 Din rail / Distribution boards76 Invicta - TP&N Distribution Boards IP41
Invicta - TP&N Distribution boards IP41 splitload
77 Invicta - TP&N type “B” dsitribution boardswith 125A - 225A frame MCCB incomer
78 Orion enclosures - steel and GRP dimensions80 Enclosures IP65 Monaco plus84 FW metal enclosures85 Vega D enclosures
Technical information
65
Ingress protection
66
1 joule
0,7 joule
0,5 joule
0,35 joule protected against access of a tool - Ø 1 mm
protected against the effect of immersion
designation
W20 joules
designation
protected against splashing waterprotected against solid objects greater than2,5mm
the Ingress Protection (IP) for all low voltage enclosures up to1000 V a.c. and 1500 V d.c. is defined in identical fashion bythe standards BSEN 60529 - IEC 529 it comprises the letters IPfollowed by two character numerals:
The first character numeralindicates the degree of protection provided by the enclosure withrespect to persons, also to the equipment inside the enclosure
The second character numeralindicates the degree of protection provided by the enclosure withrespect to harmful ingress of water; a third character may be used toindicate mechanical strength. An x signifies that no test hasbeen carried out
The first character numeral :protection against solid substances
The second character numeral :protection against liquid substances
dust-tight
IP
0
1
2
4
5
6
désignation
non-protected
protected against solid objects greater than50mm
protected against solid objects greater than12,5mm
3
protected against solid objects greater than1,0mm
dust-protected
IP
0
désignation
non-protected
1 protected against dripping water
2
3
protected against dripping water when titled upto 15°
protected against spraying water
4
5 protected against water jets
6 protected against heavy seas
7 15 cm
8 protected against submersionm
code IK : protection against mechanical shocks
code IK according to BS EN 50-102(new designation)
0,15 joule01
non-protected00
additional letter (in option)protection of people against accessto dangerous parts
A
B
C
D
protected against access of the back of the hand
protected against access of a finger
protected against access of a tool - Ø 2,5 mm
additional letter (in option)specific information on the product
H
M
S
high voltage material
movements during water test
stationary during water test
bad weather
0,2 joule
code IK shock energy
02
04
03
05
06
07 2 joules
08 5 joules
10 joules09
10
Consumer Units & Distribution BoardsAs you might expect, consideration has been given to the design ofthe enclosure to accommodate the range of MCB and RCD deviceswhich are suitable for use in domestic or similar installations, orgenerally in installations where unskilled persons have access totheir use. This, as it happens, describes the British Standard cove-ring the requirements of LV Distribution Boards suitabie for thisapplication.The full title is:
BS EN 60439-3Specification for low voltage switchgear and control switchgearassemblies. Part 3. Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed inplaces where unskilled persons have access to their use -Distribution boards
This British standard covers the supplementary requirements forenclosure distribution boards suitable for indoor use containingprotective devices and intended for use either in domesticapplications or in other places where unskilled persons have accessfor their use, Control and/or signalling devices may aiso be included.
They are for use on ac, with a nominal voltage to earth notexceeding 300V. The outgoing circuits contain short circuitprotection devices, each having a rated current not exceeding 125Awith a total incoming load current not exceeding 250A.
Customer Distribution Boards which are generally known in the UKas Consumer Units are aiso included in this British Standard. Theadditional test requirements are set out in annex ZA which calls forthe assembly to withstand a short-circuit fault of 16kA whenprotected by a 10OA specified fuse.
By definition a customer distribution board or consumer unit is anintegrated assembly, for the control and distribution of electricalenergy, principally in domestic installations, incorporating manualmeans of double pole isolation in the incoming circuits, and aredesigned for use exclusively with one or more of the followingoutgoing circuit protective devices: fuses, MCB’s and RCBO’s. Theunits may aiso incorporate RCD’s. Polarity must be observedthroughout and the consumer unit is type tested when energisedthrough a 100A type II fuse complying with BS1361. The ratedcurrent of a consumer unit is determined by the rated current of theincoming protective device, usually 63A, 80A or 100A, the ratedcurrent of the incoming device(s) is limited to 100A.
As there are no diversity factors applied to consumer units, theincoming circuit and the bus-bar system must be able to carry theirfull rated current without exceeding the temperature rise limits.
PanelboardsThe idea of group mounting MCCBs or MCBs on to a vertical threephase bus-bar system came from North America during the 1960s,where it had been used very effectively for a number of years. Thedesign takes advantage of the modular dimensions of the circuitbreakers which, together with the simple bus-bar system, proved tobe very economical and safe. The basic design philosophy behindthe panelboard is to provide a three phase distribution boardcapable of accommodating MCCBs, which is simple to specify,manufacture and install, and can be made available “off the shelf” oron a very short delivery cycle.
Generally installed for commercial and light industrial application thepanelboard is, however, used in many different types of applications.
Panelboards are covered by the British Standard for Low-voltageSwitchgear and Control Gear Assemblies BS EN 60439 Part 1, whichis the specification for type-tested and partially type-testedassemblies (general requirements).
Panelboards are usually type-tested assemblies but, unlike consu-mer units and distribution boards, they do not, as yet, have their ownparticular standard, so care must be taken in their selection andapplication, lt.is important that the system designer understands,and is able to use, the technical information that the manufacturer is required to publish regarding the panelboard. Most of theinformation is straightforward and presents little problem, exceptperhaps for internai separation ~Form numbers), degree of protection (IP rating) and short-circuit withstand strength.
Internal SeparationThe internal separation of assemblies is described in the BritishStandard BS EN 60439 and is concemed with three requirementswhich can be met by the suitable arrangement of barriers orpartitions.
• Protection against contact with live parts belonging to adjacentfunctional units.
• Limitation of the possibility of initiating and spreading of arcingfaults.
• Prevention of the passage of solid foreign bodies from one unitof an assembly to an adjacent unit.
Form numbers are given to some typical forms ofseparation -
Form 1 - no separation
Form 2 - separation of bus-bars from the functional units
Form 3 - . separation of bus-bars from the functional units andseparation of ail functional units from one another, butnot their outgoing terminais.
Form 4 - separation of bus-bars from the functional units andseparation of all functional units from one anotherincluding their outgoing terminals.
Type tested assemblies
67
30V and Vector IP65 enclosures
68
30V enclosures, surface mounting : IP30
V301 1❚ V304 4❚ V306 6❚ V308 8❚
V302 2❚
Vector IP65 enclosures
VE 212F - 2 rows 24❚ Dimensions
88
20
140
50
117
160
90
40
160
117
125
75
160
117
160
110
90
40
References Enclosure sizes Wall box
R A H E FVE 103F/E 3❚ 1 111 175 - 147VE 106F/E 6❚ 1 165 190 108 158VE 110F/E 10❚ 1 237 210 180 173VE 112F/E 12❚ 1 310 302 230 155VE 212F/E 24❚ 2 310 427 230 280VE 312F/E 36❚ 3 310 552 230 405VE 412F/E 18❚ 4 310 677 230 550VE 118F/E 18❚ 1 418 302 338 155VE 218F/E 36❚ 2 418 452 338 305VE 318F/E 54❚ 3 418 602 338 455
F
151
73,5
59
47,5
A
H 150
E
enclosure knock outs supplied cable bushesreferenceVE 103 2xM20 3xM20VE 106 1xM20+1xM25+1xM30/32 2xM20+2xM25+1xM32VE 110 1xM20/32+1xM25+3xM20 4xM20+2xM25+1xM32VE 112 2xM20/32/40+2xM25/32+3xM25+6xM20 10xM20+2xM25+1xM32VE 118 1xM20/40/50+2xM20/32+12xM25+2xM20 8xM20+10xM25+1xM32VE 212 2xM20/32/40+2xM25/32+3xM25+6xM20 14xM20+4xM25+1xM32VE 218 1xM20/40/50+2xM20/32+12xM25+2xM20 8xM20+14xM25+1xM32VE 312 2xM20/32/40+2xM25/32+3xM25+6xM20 14xM20+10xM25+2xM32VE 318 1xM20/40/50+2xM20/32+12xM25+2xM20 8xM20+18xM25+2xM32VE 412 2xM20/32/40+2xM25/32+3xM25+6xM20 14xM20+10xM25+1xM32
Connection assembly
mounting on insulating support at both end of the chassis1) additional connection assembly : VZ 403 or VZ 4282) insulated terminal VZ 743
Vector IP65 enclosures
69
Vector enclosures - IP65
VP 72G - 4 rows VP 72M - 4 rows
references number enclosure dimensions fixingof rows A H B C D E E1 F F1
VP 20G 2 250 350 160 200 300 164 280 264 380VP 20MVP 36G 3 300 500 160 250 450 214 330 414 530VP 36MVP 54G 3 400 500 210 350 450 314 430 414 530VP 54MVP 72G 4 400 650 210 350 600 314 430 560 680VP 72M
B26
A
H D
C
EE1
F F1
B26A
EE1
FH F1 150
D
C
Volta flush enclosures
VU 24D
Wall mounting bracket Connecting two enclosures
Conduit entry Cable entry plate
Connection assembly
70
Enclosure Outside InsideVolta R A B E FVU 12D 12 ❚ 1 348 336 330 317VU 24D 24 ❚ 2 348 461 330 442VU 36D 36 ❚ 3 348 586 330 567VU 48D 48 ❚ 4 348 711 330 692
Volta surface mounting,Gamma dimensions
71
Volta surface mounting dimensions
VA 24D - 2 rows 24❚ Dimensions
Gamma dimensions
GD 05A - 1 row 5❚ GD 10A - 1 row 10❚
GD 13A - 1 row 13❚ GD 26C - 1 row 26❚
GD 26A - 2 rows 26❚
GD 39A - 3 rows 39❚
GD 52A - 4 rows 52❚
References Enclosure dimension Wall box
R A H E FVA 12D 12❚ 1 305 245 270 91VA 24D 24❚ 2 305 370 270 216VA 36D 36❚ 3 305 515 270 361VA 48D 48❚ 4 305 640 270 486
H F
97
125 24
A
E
180
250
225
152
36,5
500
475
200
100
50
168
16
250
180
between rail125
350
277
36,5
250
180
between rail125
between rail125
475
402
36,5
250
180
between rail125
between rail125
between rail125
600
527
36,5
145
125
140
250
235
140
45
65
Golf dimensions
72
Flush mounting
Surface mounting
between rails 125
A
E
D
F
C
B
between rails 125
E
F
DA
B
VF 08.. 1 row 8❚ 250 230 77 94
VF 12.. 1 row 12❚ 322 265 80 97
VF 24.. 2 rows 24❚ 322 390 80 97
VF 36.. 3 rows 36❚ 322 535 80 97
dimension (mm) fixing
A B C D
209
281
281
281
E
189
VF 04.. 1 row 4❚ 180 220 73 90 140 177
224
349
494
F
VS 04.. 1 row 4❚
VS 08.. 1 row 8❚
VS 12.. 1 row 12❚
VS 24..
VS 36..
2 rows 24❚
3 rows 36❚
dimension (mm) fixing
A
130
200
275
275
275
B
180
180
225
350
500
D
86
86
95
95
95
E
120
205
205
205
F
140
160
285
410
VL enclosure
73
VL enclosure
VL 12❚ References Enclosure dimension Wall box
A H B E FVL 08.. 12❚ 250 186 27 200 170VL 12.. 24❚ 324 186 27 272 170VL 18.. 36❚ 445 208 28 360 170
70
75
A
H F
E B
Vega enclosure
VB 36P/T - 2 rows 36❚ References Enclosure FixingdimensionsA H E F G
VB 18P./T. 18❚ 370 300 300 236 32VB 36P./T. 36❚ 370 450 300 386 32VB 54P./T. 54❚ 370 600 300 536 32
135A
E
150150
H FG
References DimensionsA B C D E
Surface mountingVT/VP 04SM 226 231 208 214 70VT/VP 06SM 226 231 244 250 70VT/VP 08SM 226 231 280 286 70VT/VP 10SM 226 231 316 322 70VT/VP 12SM 226 231 352 358 70VT/VP 16SM 226 231 424 430 70
Flush mountingVT/VP 04FM 226 251 208 234 70VT/VP 06FM 226 251 244 270 70VT/VP 08FM 226 251 280 306 70VT/VP 10FM 226 251 316 342 70VT/VP 12FM 226 251 352 378 70VT/VP 16FM 226 251 424 450 70
Invicta Consumer Units IP41
74
References DimensionsA B C D E
Surface mountingVT/VP 42SM 226 231 298 304 70VT/VP 53SM 226 231 334 340 70VT/VP 44SM 226 231 334 340 70VT/VP 73SM 226 231 370 376 70VT84SM 226 231 406 412 70
Flush mountingVT/VP 42FM 226 251 298 324 70VT/VP 53FM 226 251 334 360 70VT/VP 44FM 226 251 334 360 70VT/VP 73FM 226 251 370 396 70VT84FM 226 251 406 432 70
Number of terminals
References Neutral EarthVT/VP 04SM/FM 5 8VT/VP 06SM/FM 7 10VT/VP 08SM/FM 9 12VT/VP 10SM/FM 11 14VT/VP 12SM/FM 13 16VT/VP 16SM/FM 17 20
Invicta Consumer Units IP41 split load
A B
DC E
A B
DC E
References DimensionsA B C D E
Surface mountingVT/VP 08SD 226 231 280 286 70VT/VP 12SD 226 231 352 358 70VT 18SD / VP 16SD 226 231 460 466 70
Flush mountingVT/VP 08FD 226 251 280 306 70VT/VP 12FD 226 251 352 378 70VT 18FD / VP 16FD 226 251 460 486 70
Invicta DIN rail enclosuresIP41
75
References DimensionsA B C D E
Surface mountingJK 16SD 270 275 400 405 108JK 32SD 490 495 400 405 108JK 48SD 600 605 400 405 108JK 64SD 720 725 400 405 108JK 80SD 870 875 400 405 108
Flush mountingJK 16FD 270 315 400 445 108JK 32FD 490 435 400 445 108JK 48FD 600 645 400 445 108JK 64FD 720 765 400 445 108JK 80FD 870 915 400 445 108
Invicta TP & N Distribution Board IP41
D
C
AB
E
Number of terminals
References Neutral EarthVT 08SD/FD 8 8VT 12SD/FD 12 12VT 18SD/FD 18 18
A B
DC E
Reference DimensionsA B C D E
SurfacemountingJK 42SM 720 725 400 405 108JK 44SM 720 725 400 405 108JK 64SM 815 820 400 405 108JK 66SM 870 875 400 405 108JK 84SM 870 875 400 405 108JK 88SM 965 970 400 405 108
FlushmountingJK 42FM 720 765 400 445 108JK 44FM 720 765 400 445 108JK 64FM 815 860 400 445 108JK 66FM 870 915 400 445 108JK 84FM 870 915 400 445 108JK 88FM 965 1010 400 445 108
Invicta - TP&N Distribution Boards IP41
76
Invicta - TP&N distribution boards IP41split load
D
C
AB
E
Reference DimensionsA B C D E
SurfacemountingJK 04SM/SS 490 495 400 405 108JK 06SM/SS 550 555 400 405 108JK 08SM/SS 600 605 400 405 108JK 12SM/SS 720 725 400 405 108JK 16SM/SS 870 875 400 405 108JK 18SM/SS 930 935 400 405 108JK 24SM/SS 1095 1100 400 405 108
FlushmountingJK 04FM/FS 490 535 400 445 108JK 06FM/FS 550 595 400 445 108JK 08FM/FS 600 645 400 445 108JK 10FM/FS 655 700 400 445 108JK 12FM/FS 720 765 400 445 108JK 16FM/FS 870 915 400 445 108JK 18FM/FS 930 975 400 445 108JK 24FM/FS 1095 1135 400 445 108
D
C
AB
E
Invicta - TP&N distribution boards with 125A frame MCCBIncomer (HD450 & HH449)
77
References DimensionsA B C D E
Surface mountingJK 08S 720 725 400 405 108JK 10S 815 820 400 405 108JK 12S 870 875 400 405 108JK 16S 965 970 400 405 108
Flush mountingJK 08F 720 765 400 445 108JK 10F 815 860 400 445 108JK 12F 870 915 400 445 108JK 16F 965 1010 400 445 108
References DimensionsA B C D E
Surface mountingJK 04S 550 555 400 405 108JK 06S 600 605 400 405 108JK 08S 655 660 400 405 108JK 10S 720 725 400 405 108JK 12S 815 820 400 405 108JK 16S 870 875 400 405 108
Flush mountingJK 04F 550 595 400 445 108JK 06F 600 645 400 445 108JK 08F 655 700 400 445 108JK 10F 720 765 400 445 108JK 12F 815 860 400 445 108JK 16F 870 915 400 445 108
Invicta - TP&N distribution boards with 225A frame MCCBIncomer (HH551, HH552 & HH558)
D
C
AB
E
D
C
AB
E
Orion enclosures - steelDimensions
78
FL 08A
Reference Nb Enclosure dimensions Fixingrows A H B C D E E1 F F1
FL 01A - FL 31A - 253 303 160 200 250 169 279 219 329FL 02A - FL 32A - FL 52A 2 303 353 160 250 300 219 329 269 379FL 03A - FL 33A - FL 53A 2 303 353 200 250 300 219 329 269 379FL 04A - FL 34A - FL 54A 3 303 503 200 250 450 219 329 419 529FL 05A - FL 35A - FL 55A 3 403 503 200 350 450 319 429 419 529FL 06A - FL 36A - FL 56A 4 403 653 200 350 600 319 429 569 679FL 07A - FL 37A - FL 57A 4 403 653 250 350 600 319 429 569 679FL 08A - FL 38A - FL 58A 4 503 653 250 450 600 419 529 569 679FL 09A - FL 39A - FL 59A 5 603 803 300 550 750 519 629 719 829FL 10A - FL 40A - FL 60A 6 603 953 300 550 900 519 629 869 829FL 11A - FL 41A - FL 61A 6 803 853 300 750 900 719 829 869 979
Note : add 25mm to A dimension to allow for door opening
B64
D
22
274
C
E1
E2
H
A
F F1
20E
F2
Orion enclosures - GRPDimensions
79
FL 08B
Reference Nb Enclosure dimensions Fixingrows A H H1 B C D D1 E E1 E2 F F1 F2
FL 01B - FL 31B - 255 295 150 200 242 152 169 327 223 367 219FL 02B - FL 32B - FL 52B 2 302 352 160 250 300 145 219 329 312 419 269FL 04B - FL 34B - FL 54B 3 302 569 502 200 250 450 145 219 329 462 419FL 05B - FL 35B - FL 55B 3 402 502 569 200 350 450 245 319 429 462 419FL 06B - FL 36B - FL 56B 4 402 652 200 350 600 245 319 429 612 569FL 08B - FL 38B - FL 58B 4 502 652 250 450 600 345 419 529 612 679 569FL 09B - FL 39B - FL 59B 5 602 802 300 550 750 445 519 629 762 829 719FL 12B - FL 606 850 1150 300 750 1050FL 14B 850 1450 850 300 750 750 450FL 15B 850 1750 1150 300 750 1050 450FL 16B 850 2050 1150 300 750 1050 750
Note : add 25mm to A dimension to allow for door opening
B
64
D
28
274
C
EE1
H
A
F F1
Enclosure IP65 Monaco plus
80
Enclosure with plain - transparent door
Plinth Depth adjustment slides
Reference External dimensions Internal dimensionsB H P b h
17450 - 17470 600 1300 350 500 120017452 - 17472 600 1600 350 500 150017454 - 17474 600 1900 350 500 180017455 - 17475 850 1300 350 750 120017456 - 17476 850 1600 350 750 150017458 - 17478 850 1900 350 750 1800
References Dimensions17490 600 30017491 850 300
Reference17674
BracketsReference17678
Accessories for enclosures Monaco plus
81
Plain metal mounting panel
Internal metal door
References Dimensionsb h
17504 245 119517506 245 149517508 245 179517514 495 119517516 495 149517518 495 179517524 745 119517526 745 149517528 745 1795
References Dimensionsb h
17584 248 119717586 248 149717588 248 179717594 498 119717596 498 149717598 498 179717604 748 119717606 748 149717608 748 1797
Accessories for enclosures Monaco plus
82
Din rail
Removable chassis frame
Modular cover - height 1 module
Asimetric Din rail
References Dimensionsb
16500 21216542 46216504 712
References Dimensionsb
16505 21216546 46216509 712
References Dimensionsb h
16367 498 14916365 748 149
Plain plastic cover - height 1 module
References Dimensionsb h
16377 498 14916375 748 149
Internal panel
References Dimensionsb h
16397 466 26516395 716 265
Plain metal cover - height 2 modules
References Dimensionsb h
16387 498 29916385 748 299
References Dimensionsb h
17644 496 119517646 496 149517648 496 179517654 746 119517656 746 149517658 746 1795
Accessories for enclosures Monaco plus
83
Door handle
Inserts for door handle
Reference17680
Reference Reference Reference Reference Reference17684 17685 17686 17687 17688
FW metal enclosures
84
FW metal enclosures
1 section 2 sections
Flush mounting fixing Dimensions
References enclosure inside fixing kit spaces Numberdimensions fixing outside inside of B H H1 B1 H2 B1 H1 B2 E1 E2 section rows modules doors locks
FW 41 300 650 500 165 725 165 550 375 125 100 1 4 48 1 1FW 42 550 650 500 415 725 415 550 625 125 100 2 8 96 1 1FW 43 800 650 500 665 725 665 550 875 125 100 3 12 144 2 1FW 51 300 800 700 165 875 165 700 375 150 100 1 5 60 1 1FW 52 550 800 700 415 875 415 700 625 150 100 2 10 120 1 1FW 53 800 800 700 665 875 665 700 875 150 100 3 15 180 2 1FW 61 300 950 850 165 1025 165 850 375 175 100 1 6 72 1 1FW 62 550 950 850 415 1025 415 850 625 175 100 2 12 144 1 1FW 63 800 950 850 665 1025 665 850 875 175 100 3 18 216 2 1
230
5050 200
70
B
H H1 H2
B1
B2
230 230
5050 200
70
B
H
140
E1
E2
125
125
125
depth of the enclosure 140 mm
18 mm between enclosure bottom and upright
46,5 mm between cover and door
74 mm between mounting plate and cover
120,5 mm between mounting plate and door
96,5 mm between DIN rail and door
80 mm between lowered DIN rail and cover
135 mm between enclosure bottom and door
detail aside mounting of the bracketswhen flush mounted in a wallrecess
Vega D enclosures
85
Vega D enclosuressurface, weatherproof flush
FD 52D - 5 rows 120 ❚ FU 52D - 5 rows 120 ❚
Dimensions
Surface enclosures Flush enclosures
Ref. enclosure Fixing Number of dimensionsA H E F rows mod. doors lock
FD 32D 550 550 428 442 3 72 1 1FD 42D 550 700 428 592 4 96 1 1FD 52D 550 850 428 742 5 120 1 1FD 62D 550 1000 428 892 6 144 1 1FD 72D 550 1150 428 1042 7 168 1 1
to be completedFD 22A 550 400 428 292 - - 1 1FD 32A 550 550 428 442 +1 24 1 1FD 42A 550 700 428 592 +2 48 1 1FD 52A 550 850 428 742 +3 72 1 1FD 62A 550 1000 428 892 +4 96 1 1FD 72A 550 1150 428 1042 +5 120 1 1
Ref. enclosure wall Partition Number of dimens° box wallA H E F K L rows mod. doorsverrou
min min max maxFU 22D 600 500 580 500 550 470 2 48 1 1FU 32D 600 650 580 650 550 620 3 72 1 1FU 42D 600 800 580 800 550 770 4 96 1 1FU 52D 600 950 580 950 550 920 5 120 1 1FU 62D 600 1100 580 1100 550 1070 6 144 1 1
to be completedFU 32A 600 650 580 650 550 620 +1 24 1 1FU 42A 600 800 580 800 550 770 +2 48 1 1FU 52A 600 950 580 950 550 920 +3 72 1 1FU 62A 600 1100 580 1100 550 1070 +4 96 1 1
Weatherproof enclosures
Ref. enclosure Fixing to be completeddimensions number of A H E F1 rows mod. doors verrou
FV 22A 550 500 405 574 - - 1 1FV 32A 550 650 405 724 +1 24 1 1FV 42A 550 800 405 874 +2 48 1 1FV 52A 550 950 405 1024 +3 72 1 1FV 62A 550 1100 405 1174 +4 96 1 1FV 72A 550 1250 405 1324 +5 120 1 1
110
150
47
46
A
E/K
H F/L
B
66
A
E
H F
350
185
150
47
46
88 numerical index91 worldwide addresses
Services
87
Numerical index
88
Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No.
17684 4717685 4717686 4717687 4717688 47
CCD464Z 26CD485Z 26CE464Z 26CE485Z 26CF464Z 26
FF010 49FD22A 51FD22D 51FD22P 59FD22T 59FD32A 51FD32D 51FD32P 59FD32T 59FD42A 51FD42D 51FD42P 59FD42T 59FD52A 51FD52D 51FD52P 59FD52T 59FD62A 51FD62D 51FD62P 59FD62T 59FD72A 51FD72D 51FD72P 59FD72T 59FL01A 38FL01B 39FL02A 38FL02B 39FL02M 40FL02Z 40FL03A 38FL03Z 40FL04A 38FL04B 39FL04M 40FL04Z 40FL05A 38FL05B 39FL05M 40FL05Z 40FL06A 38FL06B 39FL06M 40FL06Z 40FL07A 38FL08A 38FL08B 39FL08M 40FL09A 38FL09B 39FL09M 40FL10A 38FL10M 40FL11A 38
FL11M 40FL12B 39FL14B 39FL15B 39FL16B 39FL31A 38FL31B 39FL32A 38FL32B 39FL33A 38FL34A 38FL34B 39FL35A 38FL36A 38FL36B 39FL37A 38FL38A 38FL38B 39FL39A 38FL39B 39FL40A 38FL41A 38FL41G 40FL41P 40FL42G 40FL42P 40FL43Z 40FL44G 40FL44P 40FL45G 40FL45P 40FL46G 40FL46P 40FL48G 40FL48P 40FL49G 40FL49P 40FL50G 40FL50P 40FL51G 40FL51P 40FL51Z 40FL52A 38FL52B 39FL52G 40FL52Z 40FL53A 38FL53Z 40FL54A 38FL54B 39FL54G 40FL54Z 40FL55A 38FL55B 39FL55G 40FL55Z 40FL56A 38FL56B 39FL56G 40FL56Z 40FL57A 38FL58A 38FL58B 39FL59A 38FL59B 39FL60A 38FL60B 39FL61A 38FL80Z 38
FL81Z 39FL85Z 38FL86Z 39FL92Z 38FL95Z 38FL96Z 38FL97Z 39FL98Z 38FU22A 64FU22D 64FU32A 64FU32D 64FU42A 64FU42D 64FU52A 64FU52D 64FU62A 64FU62D 64FU72A 64FU72D 64FV22A 45FV32A 45FV42A 45FV52A 45FV62A 45FV72A 45FW31 48FW32 48FW33 48FW34 48FW41 48FW42 48FW43 48FW44 48FW51 48FW52 48FW53 48FW54 48FW61 48FW62 48FW63 48FW64 48FZ104 49FZ106 49FZ301 49FZ302 49FZ303 49FZ304 49FZ305 49FZ306 49FZ307 49FZ308 49FZ309 49FZ311 49FZ312 49FZ313 49FZ314 49FZ316 49FZ317 49FZ318 49FZ319 49FZ403 49FZ449 60FZ450 60FZ451 60FZ452 60FZ453 60FZ497 60FZ501 60
FZ502 60FZ503 60FZ507 60FZ526 60FZ527 60FZ597 49FZ598 49FZ783 38FZ792 55FZ793 38FZ794 55
GGD05A 14GD10A 14GD13A 14GD26A 14GD26C 14GD39A 14GD52A 14GP13P 15GP13T 15GP26P 15GP26T 15GP39P 15GP39T 15GP52P 15GP52T 15GS13D 15GS26C 15GS26D 15GS39D 15GS52D 15GZ05A 15GZ10A 15GZ12A 15
JJK01FK 26JK01SK 26JK02FK 26JK02SK 26JK04FB399 29JK04FD441 31JK04FD450 35JK04FD464 31JK04FD485 31JK04FE464 31JK04FH449 35JK04FM 25JK04FN384 30JK04FS125 29JK04FS160 29JK04FS200 29JK04SB399 29JK04SD441 31JK04SD450 35JK04SD464 31JK04SD485 31JK04SE464 31JK04SH449 35JK04SM 25JK04SN384 30JK04SS125 29JK04SS160 29JK04SS200 29JK06FB399 29JK06FD441 31JK06FD450 35
JK06FD464 31JK06FD485 31JK06FE464 31JK06FH449 35JK06FM 25JK06FN384 30JK06FS125 29JK06FS160 29JK06FS200 29JK06SB399 29JK06SD441 31JK06SD450 35JK06SD464 31JK06SD485 31JK06SE464 31JK06SH449 35JK06SM 25JK06SN384 30JK06SS125 29JK06SS160 29JK06SS200 29JK08FB399 29JK08FD441 31JK08FD450 35JK08FD464 31JK08FD485 31JK08FE464 31JK08FH449 35JK08FH551 35JK08FH552 35JK08FH558 35JK08FM 25JK08FN384 30JK08FS125 29JK08FS160 29JK08FS200 29JK08SB399 29JK08SD441 31JK08SD450 35JK08SD464 31JK08SD485 31JK08SE464 31JK08SH449 35JK08SH551 35JK08SH552 35JK08SH558 35JK08SM 25JK08SN384 30JK08SS125 29JK08SS160 29JK08SS200 29JK100L 26JK100R 26JK10FB399 29JK10FD441 31JK10FD450 35JK10FD464 31JK10FD485 31JK10FE464 31JK10FH449 35JK10FH551 35JK10FH552 35JK10FH558 35JK10FM 25JK10FN384 30JK10FS125 29JK10FS160 29JK10FS200 29JK10SB399 29
16365 4516367 4216367 4516375 4516377 4216377 4516385 4516387 4516395 4516397 4516500 4516504 4516505 4516509 4516542 4516546 4517450 4617452 4617454 4617455 4617456 4617458 4617470 4317470 4617472 4617474 4617475 4217475 4617476 4617478 4617490 4317490 4717491 4217491 4717499 4717504 4417506 4417508 4417514 4317514 4417516 4417518 4417524 4417526 4417528 4217584 4417584 4417586 4417588 4317594 4417594 4417596 4417598 4417604 4417606 4417608 4417644 4217644 4417646 4417648 4417654 4417656 4417658 4417674 4717674 4217674 4317678 4317678 4717680 47
Numerical index
89
Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No.
JK16SD464 31JK16SD485 31JK16SE464 31JK16SH44935JK16SH55135JK16SH55235JK16SH55835JK16SM 25JK16SN384 30JK16SS125 29JK16SS160 29JK16SS200 29JK16SX 26JK18FB399 29JK18FD464 31JK18FD485 31JK18FE464 31JK18FM 25JK18FN384 30JK18FS125 29JK18FS160 29JK18FS200 29JK18SB399 29JK18SD464 31JK18SD485 31JK18SE464 31JK18SM 25JK18SN384 30JK18SS125 29JK18SS160 29JK18SS200 29JK200L 26JK200S 26JK24FB399 29JK24FD464 31JK24FD485 31JK24FE464 31JK24FM 25JK24FN384 30JK24FS125 29JK24FS160 29JK24FS200 29JK24SB399 29JK24SD464 31JK24SD485 31JK24SE464 31JK24SM 25JK24SN384 30JK24SS125 29JK24SS160 29JK24SS200 29JK32FD 23JK32SD 23JK42FM 25JK42SK499 33JK42SM 25JK42SQ399 33JK44FM 25JK44SK499 33JK44SM 25JK44SQ399 33JK48FD 23JK48SD 23JK64FD 23JK64FM 25
JK64SD 23JK64SK499 33JK64SM 25JK64SQ399 33JK66FM 25JK66SK499 33JK66SM 25JK66SQ399 33JK80FD 23JK80SD 23JK84FM 25JK84SK499 33JK84SM 25JK84SQ399 33JK88FM 25JK88SK499 33JK88SM 25JK88SQ399 33JP002 55JP014 15JP015 49
KK018 61K023 61K024 61K025 61K037 61K140 60K142 60K143 60K144 60K145 60K148 60K150 59K151 60K156 60K158 60K159 60K160 60K162 60KB163I 64KB163N 64KB163P 64KB190B 64KB190C 64KB263A 64KB263A 59KB263C 64KB263C 59KB280B 64KB280B 59KB363A 64KB363A 59KB363B 64KB363B 59KB363C 64KB363C 59KB380A 64KB380A 59KB380B 64KB380B 59KB463A 64KB463A 59KB463C 64KB463C 59KB480A 64KB480A 59KB480B 64
KB480B 59KD163A 59KD163B 59KD180A 59KD180B 59KD190B 59KF81A 64KF82A 64KF83A 64KJ01A 55KJ01B 55KJ01C 55KJ01D 55KJ02A 62KJ02B 62KJ02C 55KM04L 60KM06L 60KM07L 60KM07N 60KM10A 60KM10C 60KM10E 60KM10L 60KM10N 60KM11B 60KM11E 60KM11L 60KM11N 60KM13E 60KM13N 60KM17E 60KM17N 60KM25E 60KM25N 60KR02F 63KR02H 63KR02N 63KR04F 63KR04H 63KR04N 63KR06F 63KR06H 63KR06N 63KR15P 62KR16F 63KR16H 63KR16N 63KR35F 63KR35H 63KR35N 63KR95P 62KZ012 60KZ013 60KZ014 60KZ015 64KZ016 64KZ017 64KZ018 64KZ019 64KZ021 58KZ022 58KZ023 58KZ024 58KZ025 64KZ031 64KZ033 64KZ034 64KZ035 64
KZ036 64KZ037 64KZ060 60
MM10B 60
PP012 13P012 49P031 55P032 55P032H 23P063K 23
SSB363 26SB399 26SB463 26SB499 26
UUC969 40UD22A5 53UD22B3 53UD22C2 53UJ22A 53UJ22D 53UJ22E 53UK22A1 53UK22B2 53UT22B 49UT44A 49UT44B 49UT44C 49UT44D 49UT44E 49UT50A 54UT50B 54UT50C 54UT52A 54
VV301 8V302 8V304 8V306 8V306F1 8V308 8V308F1 8VA12D 12VA24D 12VA36D 12VA48D 12VB18P 18VB18T 18VB36P 18VB36T 18VB54P 18VB54T 18VE103E 9VE103F 9VE106E 9VE106F 9VE110E 9VE110F 9VE112E 9VE112F 9VE118E 9
VE118F 9VE212E 9VE212F 9VE218E 9VE218F 9VE312E 9VE312F 9VE318E 9VE318F 9VE412E 9VE412F 9VF04P 17VF04T 17VF08P 17VF08T 17VF12P 17VF12T 17VF24P 17VF24T 17VF36P 17VF36T 17VP01Z 11VP02Z 11VP03Z 11VP04FM 21VP04SM 21VP04Z 11VP05Z 11VP08FD 23VP08FM 21VP08SD 23VP08SM 21VP10FM 21VP10SM 21VP12FD 23VP12FM 21VP12SD 23VP12SM 21VP16FD 23VP16FM 21VP16SD 23VP16SM 21VP20G 11VP20M 11VP36G 11VP36M 11VP42FM 21VP42SM 21VP44FM 21VP44SM 21VP53FM 21VP53SM 21VP54G 11VP54M 11VP72G 11VP72M 11VP73FM 21VP73SM 21VS04P 16VS04T 16VS08P 16VS08T 16VS12P 16VS12T 16VS24P 16VS24T 16VS36P 16VS36T 16VT04FM 21
JK10SD441 31JK10SD450 35JK10SD464 31JK10SD485 31JK10SE464 31JK10SH449 35JK10SH551 35JK10SH552 35JK10SH558 35JK10SM 25JK10SN384 30JK10SS125 29JK10SS160 29JK10SS200 29JK125L 26JK125S 26JK12FB399 29JK12FD441 31JK12FD450 35JK12FD464 31JK12FD485 31JK12FE464 31JK12FH449 35JK12FH551 35JK12FH552 35JK12FH558 35JK12FM 25JK12FN384 30JK12FS125 29JK12FS160 29JK12FS200 29JK12SB399 29JK12SD441 31JK12SD450 35JK12SD464 31JK12SD485 31JK12SE464 31JK12SH449 35JK12SH551 35JK12SH552 35JK12SH558 35JK12SM 25JK12SN384 30JK12SS125 29JK12SS160 29JK12SS200 29JK160L 26JK160S 26JK16FB399 29JK16FD 23JK16FD441 31JK16FD450 35JK16FD464 31JK16FD485 31JK16FE464 31JK16FH449 35JK16FH551 35JK16FH552 35JK16FH558 35JK16FM 25JK16FN384 30JK16FS125 29JK16FS160 29JK16FS200 29JK16FX 26JK16SB399 29JK16SD 23JK16SD441 31JK16SD450 35
Numerical index
90
Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No. Cat.ref. Page No.
VT04SM 21VT06FM 21VT06SM 21VT08FD 23VT08FM 21VT08SD 23VT08SM 21VT10FM 21VT10SM 21VT12FD 23VT12FM 21VT12SD 23VT12SM 21VT16FM 21VT16SM 21VT18FD 23VT18SD 23VT42FM 21VT42SM 21VT44FM 21VT44SM 21VT53FM 21VT53SM 21VT73FM 21VT73SM 21VT84FM 21VT84SM 21VU12D 13VU24D 13VU36D 13VU48D 13VZ131 13VZ132 13VZ133 13VZ134 13VZ303 12VZ310 18VZ311 10VZ311 16VZ403 10VZ405 54VZ428 10VZ706 55VZ707 55VZ708 54VZ708 49VZ709 18VZ709 54VZ712 18VZ712 48VZ722 10VZ723 10VZ724 10VZ725 10VZ726 10VZ727 10VZ728 10VZ729 10VZ744 10VZ754 9VZ758 10VZ764 10
91
AUSTRIA :Hager Electro Ges. m. b. H. Dieselgasse, 32333 LeopoldsdorfTel. (43) 02235 / 44600Fax (43) 02235 / 44545
BELGIUM :S.A. Hager Modulec N.V.Boulevard Industriel 61BRUXELLES 1070Tel. (32) 2 529 47 11Fax (32) 2 527 12 61
CZECH REPUBLIC :Hager Electro s.r.o.Podebradská 186/5618066 Praha 9 - HloubetinTel. (42) 02 66 10 73 08Fax (42) 02 66 10 73 10
CYPRUS :N.P. Lanitis LtdP.O. Box 50203Limassol 3602 - CyprusTel. (357) 5 56 77 70Fax. (357) 5 56 38 38e-mail : [email protected]
DENMARK :ELPEFA A/SPostbox 1802670 GREVETel. (45) 43 95 95 95Fax (45) 43 95 95 90
FINLAND :URHO TUOMINEN OyPalopellonkatu 7 - PL 3304250 KERAVATel. (358) 9 274 6411Fax (358) 9 274 641 41
ICELAND :Johan RÖNNING HfSundaborg 15104 REYKJAVIKTel. (354) 5 20 08 00Fax (354) 5 20 08 88
IRELAND :Hager Nolan LtdTechna HouseTerenure Road EastDUBLIN 6Tel. (353) 1 - 490 6611Fax (353) 1 - 490 1274
ITALY :Hager Lume S.p.A.Via Battistotti Sassi n. 1120133 MILANOTel. (39) 02 70 10 74 40Fax (39) 02 70 10 74 30
MALTA :International Trading Co.White House BuildingsMountbatten StreetBLATA L-BAJDATel. (356) 24 02 91Fax (356) 24 31 86
NETHERLANDS :Hager Electro b.v.Larenweg 365234 KA’s HertogenboschTel. (31) 73 6428 584Fax (31) 73 6442 674
NORWAY :Hager Systemer A/S.Industriveien 8bPostboks 3911473 SKÅRERTel. (47) 67 97 50 11Fax (47) 67 97 20 55
FRANCE :Hager Electro S.A.132, Bld d’EuropeB.P. n° 367215 OBERNAI CedexTel. 03 88 49 50 50Fax 03 88 49 50 03
GERMANY :Hager Electro GmbH Im Hofgarten66131 SAARBRÜCKENTel. (49) 68 93 94 50Fax (49) 68 93 94 53 76
Hager Electro GmbHZum Gunterstal66440 BLIESKASTEL Tel. (49) 68 42 94 50Fax (49) 68 42 94 56 76
GREAT BRITAIN :Hager LtdHortonwood 50TELFORD, ShropshireTF1 4FT / U.K.Tel. (44) 1952 - 677 899Fax (44) 1952 - 670 271
GREECE :Hager Hellaslapetou Street 3311364 ATHENSTel. (30) 1 864 50 90Fax (30) 1 865 09 56
HUNGARY :BurichVillanyszerelesi Rendszerek KFTSchweidel u.21047 BUDAPESTTel. (36) 1 169 06 40Fax (36) 1 169 57 31
POLAND :Hager Electro Sp.zo.o.ul. Zytnia 86Duchnice k. Warszawy05-850 Ozaruw MazowieckiTel. (48) 22 7 22 44 87Fax (48) 22 7 22 44 87
PORTUGAL :Hager SEM SA(Sistemas Electricos Modulares)Estrada para PolimaComplexo MeramarArmazem CAbóboda2775 PAREDETel. (351) 21 445 84 50Fax (351) 21 445 84 54
SPAIN :Hager Sistemas S.A.Paratge Coll-Blanc s/nApartado 3908430 LA ROCA DEL VALLESTel. (34) 902 42 2232
(34) 93 842 4730Fax (34) 93 842 2132
SWEDEN :Hager Elektro ABBox 9040400 91 GÖTEBORGTel. (46) 31 706 39 00Fax (46) 31 706 39 50
SWITZERLAND :Hager Tehalit AGMoosweg 8,Postfach 4318501 FRAUENFELDTel. (41) 052 723 24 00Fax (41) 052 723 24 05
Hager worldwide - Europe
92
Hager worldwide - Overseas
AUSTRALIA :Hager B&R LtdUnit 14 Riverside Centre148 James Ruse Drive(cnr River Road West)North Paramatta NSW 2150AUSTRALIATel. (61) 2 - 9687 0077Fax (61) 2 - 9687 0011 or 22
BAHRAIN, KUWAIT, OMAN,QATAR, SAUDI ARABIA, U.A.E.,IRAN, EGYPT, PAKISTAN andINDIAHager Tehalit SystemsM.E. FZEPOB 61056JEBEL ALIDUBAI / U.A.E.Tel. (971) 4 - 883 63 64Fax (971) 4 - 883 79 93e-mail : [email protected]
CHINA :Hager Beijing OfficeN° 308, He Qiao Building8A Guang Hua RoadChaoyang District100026 BEIJINGTel. (86) 10-6503 5170Fax (86) 10-6503 5173
HONG KONG :Hager Electro LtdSuite 310 Chinachem GoldenPlaza77 Mody RoadTsimshatsui East, KowloonHONG KONGTel. (852) 2688.0228and 0234Fax (852) 2688.0336
JORDANDasouki Trading Corp.PO Box 81542211180 AMMANTel. (962) 6 465 27 11Fax (962) 6 464 74 72e-mail : [email protected]
LEBANONCesar Debbas & FilsImm. DebbasCorniche El-NahrBEIRUT 2069 6810Tel. (961) 1 58 50 00Fax (961) 1 44 95 39e-mail : [email protected]
MALAYSIA :Hager Engineering (M)SDN BHDN° 12, Jalan 4/91ATaman Shamelin Perkasa Cheras56100 KUALA LUMPUR / MALAYSIATel. (60) 3 - 983 33 53Fax (60) 3 - 983 23 35
MAURITIUSSimelec116 Royal Road, G.R.N.W.PO Box 739Bell Village, PORT LOUISTel. (230) 212 10 73Fax (230) 212 87 62e-mail : [email protected]
SINGAPORE :Hager Electro SystemsPTE Ltd23, New Industrial Road01-03/04 Century Industrial BuildingSINGAPORE 536209Tel. (65) 383 1030Fax (65) 383 0230
SOUTH AFRICAElectromechanica(Gauteng)9/11 Data Crescent, OrmondeExt. 8PO Box 38980BOOYSENS 2016Tel. (27) 11 249 5000Fax (27) 11 496 2779e-mail : [email protected]
Electromechanica(Cape Province)44 Freeway Parkcnr Upper Camp & Berkley Rd.PO Box 267MAITLANDTel. (27) 21 510 5030Fax (27) 21 510 5050
Electromechanica(Kwazulu Natal)17 Mc Donald RoadPO Box 17317CONGELLA 4013Tel. (27) 31 205 1571Fax (27) 31 205 1625
SYRIAConstructions ElectriquesHaninoPO Box 5236Abbara Al - HamraALEPPOTel. (963) 21 22 16 044Fax (963) 21 22 47 703
OTHER COUNTRIESHager Electro S.A.PO Box 367215 OBERNAI CedexFRANCETel. (33) 3 88 49 50 50Fax (33) 3 88 49 51 44e-mail : [email protected]
93
Notes
The success is in the system
Hager Electro S.A.132, Boulevard d’EuropeB.P. 367215 Obernai CedexFranceTel. (33) 3 88 49 50 50Fax (33) 3 88 49 51 44e-mail : [email protected]://www.hager.com
94
Notes
Top Related