MX-3305-Ax i s Ve r t i c a l Ma c h i n i n g C e n t e r
MX-330
Introducing the MX-330 the latest addition to our market leadingentry level 5 axis machine series
BT40 Spindle Lineup From high speed aluminum machining to pre-hardened steels; thespindle options offered with the MX-330 are the pinnacle of 70 years of prestigious Matsuura spindle technology. A 15000min-1 with 65.1N・m of torque is installed as standard. A high-power 15000min-1 with 119.3N・m and a high-speed 20000 min-1 with 108.4N・m are available as options.
・Matsuura hand-built 5 axis quality; exceptional performance, low cost of ownership & assured residual value.・Manned or Unmanned; ergonomic & dynamic design performance assures productivity.・Equipped with the Matsuura G-Tech 31i; touch screen with large display for operator
comfort & precise control.
Features
Automation & Unmanned Package Option Matsuura’s legendary unmanned running technology with the MX-330 comes in the form of a 10 pallet (CAPTO C6 compatible) & 90 tool option; offering superb profit enhancing lights out production utilizing minimal fl oorspace.
φ420m m (16.53i n .)φ330m m (12.99i n .)
H30
0mm
(11.
81in
.)H
235m
m (9
.25i
n.)
Lo a d i n g c a p a c i t y
80kg(176l b .)
φ330m m (12.99i n .)
H30
0mm
(11.
81in
.)
Lo a d i n g c a p a c i t y
80kg(176l b .)
φ420m m (16.53i n .)φ330m m (12.99i n .)
H32
0mm
(12.
59in
.)H2
55m
m (1
0.03
in.)
Lo a d i n g c a p a c i t y
80kg(176l b .)
PC10PC1St a n d a r d (Ta b l e s p e c i fi c a t i o n )
2
3
PC10
4
BT40 Sp i n d l e s ; Th e In d u s t r y St a n d a r d , D e s i g n e d a n d D e v e l o p e db y Matsuura – t h e p i o n e e r s o f h i g h l y r i g i d CNC Sp i n d l e Te c h n o l o g y
Th r e e St a t e o f t h e Ar t Sp i n d l e Li n e u p ; Bu i l t u p o n 70 y e a r s o f Matsuura e x c e l l e n c e
• In b u i l t r e l i a b i l i t y b y s u p e r i o r d e s i g n a n d s u s t a i n e d s p i n d l e p e r f o r m a n c e f r o m Matsuura’s e n g i n e e r i n g h e r i t a g e .
• Fr o m h i g h s p e e d a l u m i n u m m a c h i n i n g t o p r e - h a r d e n e d s t e e l s ; t h e e x c e p t i o n a l p e r f o r m a n c e i n a l l m a c h i n i n g e n v i r o n m e n t s i s a s s u r e d . A 15000m i n -1 w i t h 65.1N・m o f t o r q u e i s i n s t a l l e d a s s t a n d a r d . A h i g h - p o w e r 15000m i n -1 w i t h 119.3N・m a n d a h i g h -s p e e d 20000 m i n -1 & 108.4N・m a r e a v a i l a b l e a s o p t i o n s .
• Matsuura c o n t r o l e v e r y a s p e c t o f o u r Sp i n d l e s c r e a t i o n ; f r o m d e s i g n c o n c e p t , t o p r e c i s i o n i n - h o u s e c o m p o n e n t m a n u f a c t u r e , t o c l e a n r o o m a s s e m b l y , t o r i g o r o u s t e s t i n g , t o fi n a l i n s t a l l a t i o n & c o m m i s s i o n . Q u a l i t y a s s u r a n c e & s u s t a i n e d Sp i n d l e p e r f o r m a n c e – e v e r y t i m e .
• Ma i n t e n a n c e f r e e Sp i n d l e t e c h n o l o g y ; g r e a s e l u b r i c a t e d , l o w n o i s e , e n v i r o n m e n t a l l y f r i e n d l y .
150 10010 1000 1100 3000 10000 15000
0.1
1
10
50
1
300
100
10
500
100
10
30
10
1
0.1
3.5N・m4.7N・m
4.8N・m
9.5N・m
8.8N・m7.2N・m
65.1N・m 7.5k W5.5k W
15k W
7.5k W
15k W15k W11k W
18.5k W
0.34k W0.25k W
1500010000100 1000 15005010
47.7N・m
119.3N・m
0.62k W0.50k W
0.25k W
0.45k W0.33k W
95.4N・m
47.7N・m
108.4N・m
29.4N・m
23.9N・m31.8N・m
79.5N・m
140 10010 1000 1320 10000 200004500
300
100
10
30
10
1
0.1
50% ED r a t i n gC o n t i n u o u s r a t i n g
1200
5 m i n . r a t i n g15 m i n . r a t i n gC o n t i n u o u s r a t i n g
6000
13.9k W
To r q u e(N・m )
Po w e r(k W )
To r q u e(N・m )
Po w e r(k W )
To r q u e(N・m )
Po w e r(k W )
Spindle speed (min-1)
Spindle speed (min-1)
Spindle speed (min-1)
30 m i n . r a t i n gC o n t i n u o u s r a t i n g
15000m i n -1 (5.5 / 7.5k W, 65.1N・m )
H i g h -p o w e r t y p e s p i n d l e15000m i n -1 (7.5 / 15k W, 119.3N・m )
H i g h -s p e e d t y p e s p i n d l e20000m i n -1 (11 / 15, 15 / 18.5k W, 108.4N・m )
St a n d a r d
Op t i o n
Op t i o n
5
BT40 Sp i n d l e s ; Th e In d u s t r y St a n d a r d , D e s i g n e d a n d D e v e l o p e db y Matsuura – t h e p i o n e e r s o f h i g h l y r i g i d CNC Sp i n d l e Te c h n o l o g y
Pa r t m a t e r i a l To o l s i z e Cu t t i n g w i d t h
Cu t t i n g d e p t hSp i n d l e s p e e d
Cu t t i n g f e e d r a t e
Cu t t i n g c a p a c i t y
Pa r t m a t e r i a l To o l s i z e Sp i n d l e
s p e e dCu t t i n g
f e e d r a t eCu t t i n g c a p a c i t y
Al u m i n u mØ 80m m
(3.14)3 b l a d e s
W= 70m m(2.75)
D = 4m m(0.15)
5500m i n -1
5500m m /m i n(216.53)
1540c c /m i n Al u m i n u m Ø 33m m
(1.29)1500m i n -1
450m m /m i n
(17.71)
385c c /m i n
St e e lØ 80m m
(3.14)5 b l a d e s
W= 70m m(2.75)
D = 2.5m m(0.09)
1400m i n -1
2000m m /m i n
(78.74)
350c c /m i n St e e l Ø 33m m
(1.29)1200m i n -1
200m m /m i n
(7.87)
171c c /m i n
Al u m i n u mØ 25m m
(0.98)2 b l a d e s
W= 22m m(0.86)
D = 6m m(0.23)
15000m i n -1
8500m m /m i n(334.64)
1122c c /m i n Al u m i n u m M36
× P4.0120m i n -1
480m m /m i n
(18.89)
St e e lØ 20m m
(0.78)4 b l a d e s
W= 3m m(0.11)
D = 30m m(1.18)
5000m i n -1
4200m m /m i n(165.35)
378c c /m i n St e e l M24
× P3.0100m i n -1
300m m /m i n
(11.81)
Cl a s s i c Matsuura Ma c h i n e Bu i l d ; a Co m m i t m e n t t o En g i n e e r i n g Ex c e l l e n c e
Ma c h i n i n g a n y m a t e r i a l f o r s u s t a i n e d p e r i o d s o f t i m e t o i n c r e d i b l e a c c u r a c y r e q u i r e s t h e m o s t r i g i d & t e s t e d m a c h i n i n g s t r u c t u r e . D e s i g n e d w i t h FEM a n a l y s i s u t i l i z i n g m a n y d e c a d e s o f Matsuura m a c h i n e k n o w -h o w & h e r i t a g e , t h e MX-330 i s t h e 5 a x i s p l a t f o r m f o r t h e p r e c i s e c r e a t i o n o f s m a l l c o m p o n e n t s , w h e r e q u a l i t y a n d s u s t a i n e d p e r f o r m a n c e i s a p r e -r e q u i s i t e .
* Th e a b o v e d a t a i s b a s e d o n a c t u a l c a s e s . D e p e n d i n g o n c o n d i t i o n s , a c t u a l r e s u l t s m a y d i f f e r .
■ Cu t t i n g t e s t r e s u l t s (H i g h - p o w e r t y p e s p i n d l e BT40 15000m i n -1, 119.3N・m )
Mo v e m e n t a n d Ra n g e s
X -a x i s s t r o k e m m (i n .) 435 (17.13)
Y-a x i s s t r o k e m m (i n .) 465 (18.31)
Z-a x i s s t r o k e m m (i n .) 560 (22.05)
A-a x i s r o t a t i o n a n g l e (r o t a t i o n o n t h e X a x i s ) d e g -125~ + 10
C-a x i s r o t a t i o n a n g l e (r o t a t i o n o n t h e Z a x i s ) d e g 360
* Ph o t o s h o w s m a c h i n e w i t h 60-t o o l o p t i o n i n s t a l l e d
Op t i o n
F a c e m i l l D r i l l
En d m i l l Ta p
6
4th / 5th axis rotary table
As with all machines in the MX Series, a proven, high performance trunnion table is utilized on the MX-330.
■φ250mm tableFixtures used with MAM72-35V can be mounted.
■ 6-port through-table (Max. supply pressure 19.6MPa)
OptionStandard
■ 90-tool chain magazine Option■ Tool specifi cation
OptionStandard BT40 HSK-A63
φ80
mm
(3.1
4in.
)
300mm (11.81in.)
φ15
0mm
(5.9
0in.)
10 kg (22lb.)10 kg (22lb.)
*1
*2
■ 60-tool chain magazine Option■ 30-tool drum magazine Standard
※ Refer to MX-330 Max. workpiece size and loading capacity
ATC
Options; Tailored to Your Process
*1 With adjacent tools*2 Without adjacent tools
7
30-tool drum magazine 60-tool chain magazineOptionStandard
Simple & Safe ATC Access
ATC door offers ample space & visibility for tool set up & maintenance operations.
Minimal interference between the spindle head & table, offering excellent workpiece access to the cutting tool.
Accessibility to workpiece and spindle
Operator comfort and eff iciency is at the heart of the MX-330 design. The main access door offers a generous 650mm of opening width, facilitating safe, fast & smooth load / unload operations. The distance from the front face of the machine to the center of the table is 385 mm, securing ergonomic access to the workpiece and spindle.
*Pallet specifi cation is 1020mm (40.15in.)
1000mm*(39.37in.)
650mm (25.59in.)
385mm(15.15in.)
385mm385mm385mm385mm385mm(15.15in.)(15.15in.)(15.15in.)(15.15in.)(15.15in.)(15.15in.)(15.15in.)(15.15in.)(15.15in.)(15.15in.)
385mm(15.15in.)
Excellent Access to the Machining Enclosure
8
Item Specifi cations
ATC 90tool
APC
Number of pallets 10(Floor pallet system)
Pallet type CAPTO C6
Through-pallet3 ports (Max. 19.6 MPa)
Option
PC10
3870
(152
.36)
Pallet pool
3360 (132.28)
90-to
ol m
agaz
ine
Coolant tankLift-upchip conveyor
PC10
Automation & Unmanned Production Package Option
Matsuura’s legendary unmanned running technology with the MX-330 comes in the form of a 10 pallet (CAPTO C6 compatible) and 90 tool option; offering superb profi t enhancing lights out production utilizing minimal fl oor space
Automation Package
Pioneers of reliable unmanned production, the 10 pallet, 90 tool specification of the MX-330 is carefully weighted to offer maximum return on investment. Each of the 10 pallets can accommodate φ 330 mm x H 300mm Max. workpiece size.
Option
5-Axis Vertical Machining Center
MAM72-35V
Toward Full-Spec. AutomationSmooth step-up from MX-330 possible
The MX-330 and our established MAM72-35V 5 axis machines both utilize CAPTO C6 pallets, offering seamless interaction and deployment of pallets and fi xtures between both machines
PC32
9
A B C
1612mm(63.46in.)
PC1 (single pallet) CAPTO C6
CAPTO C6, which excels at high-accuracy positioning and repeat accuracy, is adopted.P a l l e t s a r e t h e s a m e a s f o r MAM72-35V allowing common use of fi xtures.
OptionWork station
Work station access allows the set up of three pallets (A, B & C as shown) simultaneously.
Work station (rotary)
Rotary mechanism provided in the B position increases setup effi ciency. Setup is possible by turning 90 degrees.
Option
Standard
Three-port pressuresupply system to fi xtures
Equipped with pressure supply ports for through-pallet-system fi xtures.Supports pressures of up to 19.6 MPa.
Option
A B CRobot interface + Automatic door
Interface for connection with external workpiece transfer systems
Option
Automation with a robot
※ Refer to MAM72-35V Max. workpiece size and loading capacity
Equipped with a large 15-inch touch screen display, the Matsuura G-Tech 31i offers genuine ergonomic comfort & sustained operator performance• Icons required for operation, setup and maintenance are displayed on screen.• Screen icons required for each task - “Operation”, “Setup”, “Maintenance” - are displayed.• Screen switching response time is improved by 50% compared to conventional panels.• USB thumb drives and CF cards are also supported for data input/output.• Customization is possible according to tasks to be performed.
New Operation Panel
Matsuura Intelligent Meister System
Operating Convenience AllowingEven Beginners to Use it With Confidence
Combining Craftsmanship, Skill and IngenuityMatsuura’s original interface with uncompromising pursuit of usability
Accuracy
SimpleSecure
Eco Meister
■ Power cut-off function■ Energy-saving devices installed■ Eco-operation
Power savings
Eco mode
Operability Meister
■ Tool setup support■ Workpiece setup support
Hassle-free, simple operation
Thermal Meister
■ Spindle thermal displacement compensation■ Environmental thermal displacement compensation
Stable accuracy
Reliability Meister
■ Preventive maintenance support function■ Machine recovery support function■ Electronic manual function ■ E-mail transmission function
Reduced machine downtime
Environment Option
Program management Tool offset Electronic manual display
10
Matsuura G-Tech 31i
Manual / Automatic operation Simultaneous 5-axis machiningThis collision protection function is developed solely by Matsuura. It prevents machine collisions due to programming errors in automatic operation, and also prevents human error in advance during manual operation and workpiece setup.
ON
* The Intelligent Protection System simulates your programmed components (tools, workpiece, fi xtures, etc.) that match the machine model, alerting you to any possible interference or collision before actual machining takes place.
* Prepare a PC on your side. Contact Matsuura for PC requirements.
PC Machining center
Stop
■ On-line link with PC
Simple turning function combining orbit machining and C-axis rotationTurning processes can also be performed on this machining center by using a synchro chip. Since turning and machining can now be done in one process no additional setup time is required for the turning process.
Option Patent No. 5883535
* Orbit function* Synchro Tip (Orbit machining + C-axis rotation)
Advanced 5-axis error measurement and correction Geometric error correction is essential for multi-axis machine tools. eZ-5 completes measurement, using a touch probe and calibration sphere, in a mere 3 minutes. The high accuracy of the machine is maintained through quick and simple operations.* eZ-5 requires a separately available NC option to add macro variables.
Option
+Orbit machining
Option
11
12
Option
Option
Lift-up chip conveyor (side disposal)
Chip bucket
Standard Coolant tank
OptionStandard
Standard
Spiral chip conveyorChip-fl ush coolant
Chip-fl ow coolant
Smooth and Efficient Swarf management – by Design
Steep angle gradients on telescopic guard covers & internal surfaces & powerful coolant wash system facilitate the rapid despatch of chips and swarf from the machining enclosure, delivering maintenance free extended machining without the need for manual intervention. For environments where vast amounts of metal removal take place, the options below are available.
Rapid Metal Removal Requires Ultra EfficientChip Flow & Swarf Clearance
Option
Option
Lift-up chip conveyor (back disposal)
Chip bucket
13
Stroke diagram Unit: mm (in.)
255 (10.03) 290 (11.41) 175 (6.88)
125 (4.92)125 (4.92)
132 (5.19)132 (5.19)
172 (6.77)172 (6.77)193 (7.59)193 (7.59)
180 (7.08)
435 (17.12) (X-AXIS STROKE) 465 (18.30) (Y-AXIS STROKE)
514
(20.
23)
514
(20.
23)
448
(17.
63)
440
(17.
32)
420
(16.
53)
390
(15.
35)
400
(15.
74)
560
(22.
04)
(Z-A
XIS
STR
OK
E)
560
(22.
04)
(Z-A
XIS
STR
OK
E)
20 (
0.78
)
φ420* (16.53)
H32
0* (
12.5
9)H
320*
(12
.59)
φ42
0* (
16.5
3)
H320* (12.59)
20 (0.78)20 (0.78)75 (2.95)75 (2.95)
CENTER OFA-AXIS ROTATION
CENTER OFA-AXIS ROTATION
Top view Unit: mm (in.)
10
CENTER HOLE
M (4 SLOTS) : FIRST GRADE N (4 SLOTS) : SECOND GRADE
19 19
198198
12 +0.027 0
65 +0.03 0
12 +0.18 0
NN
M
M
M
M
NN
φ250 (9.84)
45° 45°90°
4-M12depth24(PCD95)
THROUGH PORT
19 19
19819812 +0.027
0 12 +0.18 0
10
φ65φ40
PCD25
+0.03 0 φ11.2 +0.05
0
1.4±
0.05
CENTER HOLE
M (4 SLOTS) : FIRST GRADE N (4 SLOTS) : SECOND GRADE
AA
FFEE
DD
CC BB
4-M12depth24(PCD95)
45° 45°90°N
M
M
M
N
N
N
M
φ250 (9.84)10
CENTER HOLE
M (4 SLOTS) : FIRST GRADE N (4 SLOTS) : SECOND GRADE
19 19
198198
12 +0.027 0
65 +0.03 0
12 +0.18 0
NN
M
M
M
M
NN
φ250 (9.84)
45° 45°90°
4-M12depth24(PCD95)
THROUGH PORT
19 19
19819812 +0.027
0 12 +0.18 0
10
φ65φ40
PCD25
+0.03 0 φ11.2 +0.05
0
1.4±
0.05
CENTER HOLE
M (4 SLOTS) : FIRST GRADE N (4 SLOTS) : SECOND GRADE
AA
FFEE
DD
CC BB
4-M12depth24(PCD95)
45° 45°90°N
M
M
M
N
N
N
M
φ250 (9.84)
With through-table Pallet top viewTable top view
2 (0
.07)
2 (0
.07)
45° 45°
30°
15 (0.59)
50 (1
.96)
4-M12depth24(PCD95)
8 (0.
31)
108
(4.2
5)40 (1
.57)
16 (0
.62)
18 (0
.70)
φ130 (5.11)
φ30 (1.18)+0.013 0
φ126 (4.96)
38 (1
.49)
Option Option
*Max. workpiece size
* A-F is a Port Number(PCD25)
Standard
Standard
14
Standard Machine Specifcations
■ Standard Accessories01. Total splash guard 02. ATC magazine guard03. ATC auto door 04. Spindle oil cooler05. Auto grease supply unit for feed axes 06. Scale feedback (A/C axis)07. Coolant unit 08. Chip flush09. Chip flow 10. Work light11. Synchronized tapping function 12. AD-TAP function13. IPC function 14. Spindle overload protection function15. M-code counter (9 kinds) 16. Spindle thermal displacement compensation system17. Software tool for memory card program operation & editing18. MIMS (Matsuura Intelligent Meister System) 19. Integrating spindle run hour meter20. Integrating auto run hour meter 21. Service tools and tool box22. Machine color paint 23. Leveling bolts, leveling plates24. Electronic manual 25. E-mailing function26. Fault diagnosis function
* 2 years spindle warranty
■ Movement and RangesX-axis stroke mm (in.) 435 (17.13)Y-axis stroke mm (in.) 465 (18.31)Z-axis stroke mm (in.) 560 (22.05)A-axis rotation angle deg -125~ +10C-axis rotation angle deg 360■ TableWorking surface mm (in.) φ250 (φ9.84)Loading capacity kg (lb.) 80 (176)
Max. workpiece size mm (in.) φ330×H320 (φ12.99×H12.59)φ420×H320 (φ16.53×H12.59) (with restrictions)
■ Spindle Spindle speed min-1 50~ 15000 (auto grease lubrication)Spindle speed change command - S5 digits direct commandType of spindle taper hole - 7/24 taper #40 (BT double contact type)Spindle bearing inner diameter mm (in.) φ70 (φ2.75)Spindle motor output kW AC5.5/7.5Max. spindle torque N・m 65.1■ Feedrate Rapid traverse rate X / Y / Z mm/min (ipm) 40000 (1574.8) A / C min-1 17 / 33Feedrate X / Y / Z mm/min (ipm) 1~ 40000 (0.03~ 1574.8) A / C min-1 17 / 33■ Automatic Tool Changer Type of tool shank - JIS B 6339 tool shank 40TPullstud - JIS B 6339 pullstud 40PTool storage capacity tools 30 (Drum magazine)
Max. tool diameter mm (in.) φ80 (φ3.14) (With adjacent tools)φ150 (φ5.90) (Without adjacent tools)
Max. tool length mm (in.) 300 (11.81)Max. tool mass kg (lb.) 10 (22.05)Method of tool selection - Memory random system
■ Power Sources Electrical power supply kVA 31 (Depends on the options provided)
Power supply voltage V AC 200 / 220±10%Transformer required for the voltage except adove
Power supply frequency Hz 50 / 60±1■ Tank CapacityCoolant tank capacity L 350Oil cooler tank capacity L 14 (Total capacity: 16)■ Machine SizeMachine weight kg (lb.) 6300 (13860)■ NC System Control system - Matsuura G-Tech 31i
Floor plan Unit: mm (in.)
LEVELING BOLTS(#40 30TOOL MAGAZINE)
(SPACE FOR PULLING OUT COOLANT TANK)
6-M32×P2
POWER SUPPLY
COOLANT TANKAIR SUPPLY
600
(23.
62)
1865
(73.
42)
(700
(27.
55))
430
(16.
92)
430
(16.
92)
848 (33.38) (100 (3.93))
3165
(124
.60)
1020 (40.15)
5050 (198.81)
1126 (44.33) 1504 (59.21)
705 (27.75) 825 (32.48) 615 (24.21)
160 (6.29)60 (2.36)
2775 (109.25)
N/C UNIT
OPERATOR PANELOIL COOLER
307 (12.08)307 (12.08)
260 (10.23)260 (10.23)
519
(20.
43)
519
(20.
43)
15
List of Fittings
■ Spindle15000min-1 (BT40 auto grease lubrication) ○15000min-1 (BT40 auto grease lubrication)
▲Spindle motor output kW Low: 7.5 / 15、High: 7.5 / 15Max. spindle torque N・m 119.3
20,000min-1 (BT40 auto grease lubrication)▲Spindle motor output kW Low: 11 / 15、High: 15 / 18.5
Max. spindle torque N・m 108.4■ Tool Storage Capacity30 tool (Drum magazine) ○60 tool (Chain magazine) ▲90 tool (Chain magazine) ▲■ Number of Pallets1 (Single pallet)*1 ▲10 (Floor pallet system)*2 ▲■ Automation PackageAutomation package (PC10 , 90tools , Spiral) ▲■ High Accuracy ControlScale feedback X-/Y-/Z-axis ▲Environmental thermal displacement compensation (15000min-1spindle) ▲Environmental thermal displacement compensation (20000min-1spindle) ▲■ CoolantVacuum type coolant through A 7MPa ▲Vacuum type coolant through A 14MPa ▲Vacuum type coolant through B 7MPa ▲Vacuum type coolant through B 14MPa ▲Vacuum type coolant through C 2MPa ▲Vacuum type coolant through C 7MPa ▲Mist separator (without fire damper/ with fire damper) ▲Mist separator retrofitting ▲Coolant temperature controller with tank 100L ▲■ Automatic Measurement, Tool Breakage DetectionAutomatic measurement / automatic alignment (optical , RENISHOW) ▲Automatic measurement / automatic alignment (optical , BLUM) ▲Tool breakage / full automatic tool length measurement (laser , BLUM) ▲Tool breakage / full automatic tool length measurement (laser , RENISHOW) ▲External tool breakage (30tools , contact) ▲External tool breakage (60tools , contact) ▲External tool breakage (90tools , contact) ▲*1 Max. workpiece size : φ420×H300(mm)*2 Max. workpiece size : φ330×H300(mm)
■ Chip RemovalChip bucket ▲Spiral chip conveyor ▲Lift-up chip conveyor (scraper) ▲Air blow for chip removal ▲Workpiece cleaning gun (machine side) ▲■ Operation/Maintenance SupportIntelligent Protection System ▲Reliability Meister Plus Type A (with PC) ▲Reliability Meister Plus Type B (without PC) ▲Additional eight M functions ▲Spindle load monitoring function ▲Weekly timer ▲3-color signal light (red, yellow, green from top) ▲Optional block skip addition 2 to 9 ▲External manual pulse generator ▲eZ-5 (with calibration sphere) ▲eZ-5 (without calibration sphere) ▲Pressure supply system for fixtures ▲Rotary wiper (Air) ▲Rotary wiper (Electric) ▲OP auto door ▲Robot interface + auto door ▲Robot + auto door ▲■ Optional PackageHigh-speed, high-precision package ▲5-axis package ▲High-speed, high-precision 5-axis package ▲
○:Standard ▲:Option
External view Unit: mm (in.)
Front viewLeft side view Right side view
■ Tool breakage / full automatic tool length measurement (laser) Option
Standard
2321~
2881
(91.
37~
113.
42)
2200
(86.
61)
560
(22.
04)
20 (0
.78)
180 (7.08)
180 (7.08)
1000
(39.
37)
1865 (73.42)
125°
10°
20
(0.7
8)
(Z-
AX
IS T
RAV
EL)
(Z-
AX
IS T
RAV
EL)
(X-AXIS TRAVEL)(X-AXIS TRAVEL)
(A-AXIS TRAVEL)(A-AXIS TRAVEL)
255(10.03)255(10.03)
2755
(108
.46)
2617
(103
.03)
(HE
IGH
T A
T S
HIP
ME
NT)
#40 30 TOOL MAGAZINE
290 (11.41)
290 (11.41)
(Y-AXIS TRAVEL)(Y-AXIS TRAVEL)
175(6.88)175(6.88)
FX -E1.2 201802 2000 B N
Th i s p r o d u c t i s s u b j e c t t o a l l a p p l i c a b l e e x p o r t c o n t r o l l a w s a n d r e g u l a t i o n s
U R L : h t t p : / / w w w . m a t s u u r a . c o . j p /E - M A I L : w e b m a s t e r @ m a t s u u r a . c o . j p
● Product specifications and dimensions are subject to change without prior notice.● The photos may show optional accessories.
M A T S U U R A M A C H I N E R Y C O R P O R A T I O N1-1 Urushihara-cho Fukui City 910-8530, JapanTEL : +81-776-56-8106 FAX : +81-776-56-8151
M A T S U U R A E U R O P E G m b HBerta-Cramer-Ring 21D-65205 Wiesbaden-Delkenheim, GermanyTEL : +49-6122-7803-80 FAX : +49-6122-7803-33URL : http://www.matsuura.de/E-MAIL : [email protected]
M A T S U U R A M A C H I N E R Y L t d .Gee Road, Whitwick Business Park, Coalville Leicestershire, LE67 4NH, EnglandTEL : +44-1530-511-400 FAX : +44-1530-511-440URL : http://www.matsuura.co.uk/E-MAIL : [email protected]
M A T S U U R A M A C H I N E R Y G m b HBerta-Cramer-Ring 21D-65205 Wiesbaden-Delkenheim, GermanyTEL : +49-6122-7803-0 FAX : +49-6122-7803-33URL : http://www.matsuura.de/E-MAIL : [email protected]
E L L I O T T M A T S U U R A C A N A D A I N C .2120 Buckingham Road Oakville Ontario L6H 5X2, CanadaTEL : +1-905-829-2211 FAX : +1-905-829-5600URL : http://www.elliottmachinery.com/E-MAIL : [email protected]
M A T S U U R A M A C H I N E R Y U S A I N C .325 Randolph Ave., St.Paul, MN 55102, U.S.A.TEL : +1-651-289-9700URL : http://www.matsuurausa.com/E-MAIL : [email protected]
Top Related