Universal lathes with toolmaking precision
for industrial applications
ConventionalLathes
MAT 14S/14DMAT 17SMAT 17DMAT 20D
The electronics comply with the latest technical standards (CE).
Lead and tension spindle with partial cover
Diagonally ribbed, induction-hardenedmachine bed with 3-point support
Machine column
Chuck protection with limit switch. Drive spindle with 40 mm (1.6“) spindle bore.
Tail stock made of top-quality,vibration-absorbing, heavily-ribbed cast iron, based on itsown guide prism. The tailstock can be set eccentricallyfor cutting tapers.
3-axis digital display with color monitor (EMCOMAT 14D)
EMCOMAT 14D
EMCOMAT 14S/14D EMCOMAT 17S/17D/20D The Technology
The EMCOMAT 14S/14D
The EMCOMAT 14 is the smallest machine in the EMCOMAT series.
It takes the place of the EMCO classic Maximat Super 11CD.
The EMCOMAT 14 is a lathe for the most demanding needs:
with infinite speed adjustment, constant cutting speed (14D)
and an impressive 7,5 kW (10.1 hp) of drive power. This high per-
formance machine has the highest precision in a small space,
including optical, electrical and automobile workshops, in labora-
tories and also in the Formula 1.
Technical data
Spindle nose CAMLOCK DIN 55029 S4Distance between centers 650 mm (25.6“)Center height 140 mm (5.5“)Power 7,5 kW (10.1 hp)Speed control SteplessDigital read out at EMCOMAT 14D
2 3
Camlock DIN 55029 S4, 40 mm (1.6“) spindle bore
Options
The new EMCOMAT 14 comes with the followingoptions: chip protection door, machine case, multifax fast change holder, jaw chuck, live center,high-pressure coolant device.
3
Safety
For the safety of the operator, thechuck protection and wheel caps are monitored by an electric switch.
3
EMCOMAT 14S
The technology. The headstock is made of vibration absorbing, heavily ribbed cast iron. The rigid, large main
spindle runs in high-precision adjustable taper roller bearings with Camlock DIN 55029 S4 short taper connection. Reverse
gear unit in a totally closed construction. Scraped cogs and the axial motion when reversing increase operational reliabi-
lity and reduce vibration. Slides: longitudinal slide with no-play prismatic guide. Optimum guide ratio with the long guide.
The cross slide runs in a dove-tail guideway. Adjustment via pressure plate. Feed automatic or with handwheel. Both the
longitudinal and cross slides can be clamped. The upper slide with dove-tail guideway can be pivoted 360°. A feed lever
with safety lock prevents longitudinal and axial feed switch-through.
Infinite speed adjustment. The EMCOMAT 14 does not have a gear box. Electronic speed adjustment,
constant cutting speed on the 14D and an impressive 7,5 kW (10.1 hp) drive performance ensure the right speed and
most suitable torque throughout the entire torque range.
Precise placement using the large handwheel with graduated collar
Long parts are drilled with a steady restLong parts are processed with tail stock and live center
Inside turning Machine case for the clean storage of tools(Option)
The EMCOMAT 17S, 17D and 20D
EMCOMAT 14S/14D EMCOMAT 17S/17D/20D The Technology
Speed range main spindle EMCOMAT 17/20D
We have made one of the best conventional lathes even better.
The new EMCOMAT 17S/17D/20D. The ease of use and ergonomics
have been enhanced. On the D-versions the highly modern 3-axis
digital display has 99 tool positions, 99 contour points, constant
cutting-speed and infinite variable speeds. The quality and precision
of these machines are unchanged.
Technical data EMCOMAT 17S EMCOMAT 17D EMCOMAT 20D
Spindle nose CAMLOCK DIN 55029 S5 CAMLOCK DIN 55029 S5 CAMLOCK DIN 55029 S5Distance between centers 700 mm (27.6“) 700 mm (27.6“) 1000 mm (39.37“)Center height 170 mm (6.7“) 170 mm (6.7“) 200 mm (7.9 hp)Power 3,2 kW (4.3 hp) 5,3 kW (7.1 hp) 5,3 kW (7.1 hp)Speed control Mechanical Electric Variable Electric VariableDigital read out - yes yes
50 mm (2“) spindle bore
Vibration-free base with 3-point support
Single-lever operation foraxial and longitudinal feed
Chuck protection with limitswitch. Drive spindle with 50 mm (2“) spindle boreHigh-performance drive with
infinite speed adjustment (17/20D)
Diagonally ribbed, induction-hardened machine bed with3-point support
Rigid, shared lead and tension-spindle cover
3-axis digital display withcolor monitor (17/20D)
0 600 1200 1800 2400 3000
6
5
3
2
1
0
3000 rpm
KW
Motor power40 %DC; 5,3kW
Motor power100 %DC; 4kW
B2A2A1 B1
EMCOMAT 20D
4 5
The perfect machine for small-series production. Excellent ergonomics and high repeataccuracy are key issues when you machine small series. Our customers appreciate EMCOMAT's automatic spindle brake,its infinite variable speed control, and its constant cutting speed. We ensure the best cutting performance and high driveefficiency – very helpful when things have to go fast (17D/20D). A mechanical collet chuck provides additional comfort.And anyone who has ever used the special positioning display function ”99 tool store“ will never want to go without itagain.
Centering drill bit for live center
Machine bed
The diagonal ribbed machine bedensures good chip fall and top machinestability. The guide rails are hardenedand ground. 3-point support on themachine base.
Headstock
The headstock quality is tested usinga 3-D Zeiss gauge. The drive spindleruns in adjustable precision bearings.The diameter in the front bearing is70 mm (2.8“).
Machining with a fixed steady rest
Machine structure
Bed and cross slide have a manualcentral lubricant supply. The X and Y axis are equipped with safetyhandwheels.
Machine base
The machine base is low-vibration.Slanting catcher sheets make clea-ning easy and allow the coolant torun off.
3
Safety
The chuck protection and wheel capare monitored by an electric switchfor the safety of the operator.
3
EMCOMAT 17DEMCOMAT 17S
3
3
3
Clear control panel with speed control, emergency stop and 4-color digital display (Option)
EMCOMAT 17S/17D/20D
Performance and torque diagram main spindleEMCOMAT 17S/17D/20D
The Technology
Options
q Guide rails, cogs and sleeves hardened and groundq Speed-gear box via 2 levers (EMCOMAT-17D/20D)q 3-point support of the machine bedq Diagonally ribbed, induction-hardened
machine bedq Rigid, shared leading and tension spindle coverq Long cross slide (for second tool system)q Integrated overload clutch for feedq Infinite speed adjustment/constant cutting speed.
(EMCOMAT-14D/17D/20D)q Electromechanic spindle brakeq Vibration-reducing machine baseq 2-year EMCO quality guarantee
Fast Facts
2000 3000 400010000
(Nm)
Speed (rpm)
40
35
30
25
20
15
10
5
0
5050000
S6 = 40% ED
S1 = 100% ED
200 300 4001000
60
(Nm)
700
600
500
400
300
200
100
80
60
40
20
0
500 2000 3000500 750
165
130
360
465
1350
1070
A1
A2
B1
B2
1000
Speed (rpm)
Digital display EMCOMAT 14D/17D/20D
The D models have a permanent position display on the TFT screen for the bed,axial and upper slides. The bed-slide position is monitored by a high-precisionrack on the encoder. The cross-slide position is monitored by a glass gaugewith 0,001 mm precision, enabling the diameter to be set with extremely highprecision. The position of the upper slide is monitored by the direct drive of the encoder via the adjusting spindle. The features: constant machining speed,99 tools, 99 reference positions, basing point, remaining path, empirical/metric,radius/diameter display, single or total display for Z and Z0, languages: German,English, Spanish, Italian, Dutch, French, screen size 6.5“ color-TFT, 640 x 480 (VGA).
q Fast-change tool holderq Foot brakeq Tapered-bar feedq Tool caseq Chip protection door
q Machine lampq High-pressure coolant deviceq Collet chuckq Steady rests
Basic Configuration
q Machine including baseq Single steel holder (tension claw)q Electrical chuck protectionq Belt drive for feed gear boxq 3 sheering pins
q One fixed center punch in boththe drive spindle and tail stock
q Operating and servicing toolsq Documentation
The Technology
Performance and torque diagram main spindleEMCOMAT 14S/14D
EMCOMAT 14S/14D
3
6 7
Workspace
Distance between centers 650 mm (24.6”) 650 mm (24.6”) 700 mm (27.6“) 700 mm (27.6“) 1000 mm (39.4”)
Height of centers 140 mm (5.5”) 140 mm (5.5”) 170 mm (6.7“) 170 mm (6.7”) 200 mm (7.9”)
Swing over bed Ø 280 mm (11.0”) Ø 280 mm (11.0”) Ø 340 mm (13.4“) Ø 340 mm (13.4“) Ø 400 mm (15.7”)
Swing over cross slide Ø 170 mm (6.7”) Ø 170 mm (6.7”) Ø 190 mm (7.5“) Ø 190 mm (7.5“) Ø 250 mm (9.8”)
Bed width 155 mm (6.1”) 155 mm (6.1”) 260 mm (10.2“) 260 mm (10.2“) 260 mm (10.2”)
Travel of longitudinal slide 590 mm (23.2”) 590 mm (23.2”) 600 mm (23.6“) 600 mm (23.6“) 900 mm (35.4”)
Travel of cross slide 135 mm (5.3”) 135 mm (5.3”) 220 mm (8.7“) 220 mm (8.7“) 220 mm (8.7”)
Travel of top slide 100 mm (3.9”) 100 mm (3.9”) 110 mm (4.3“) 110 mm (4.3“) 110 mm (4.3”)
Cross-section of cutting tool 12 x 12 mm (0.5 x 0.5”) 12 x 12 mm (0.5 x 0.5”) 20 x 20 mm (0.8 x 0.8”) 20 x 20 mm (0.8 x 0.8”) 20 x 20 mm (0.8 x 0.8”)
Spindle
Spindle nose size CAMLOCK DIN 55029 S4 CAMLOCK DIN 55029 S4 CAMLOCK DIN 55029 S5 CAMLOCK DIN 55029 S5 CAMLOCK DIN 55029 S5
Spindle bore Ø 40 mm (1.6”) Ø 40 mm (1.6”) Ø 50 mm (2”) Ø 50 mm (2”) Ø 50 mm (2”)
Spindle diameter in front bearing Ø 54 mm (2.1”) Ø 54 mm (2.1”) Ø 70 mm (2.8”) Ø 70 mm (2.8”) Ø 70 mm (2.8”)
Face plate diameter (maximum) Ø 152 mm (5.9”) Ø 152 mm (5.9”) Ø 200 mm (7.9”) Ø 200 mm (7.9”) Ø 260 mm (10.2”)
Chuck diameter (maximum) Ø 140 mm (5.5”) Ø 140 mm (5.5”) Ø 200 mm (7.9”) Ø 200 mm (7.9”) Ø 200 mm (7.9”)
Spindle speeds 60 – 4000 rpm 60– 4000 rpm 55 – 2350 rpm 40 –3000 rpm 40 –3000 rpm
Speed control Stepless Stepless Mechanical Stepless Stepless
Speeds/speed ranges 2/60–2000 2/60–2000 8/55, 95, 160, 280, 470 4/40–130, 110–360 4/40–130, 110–360
Speed range 2000–4000 rpm 2000–4000 rpm 800, 1320, 2350 rpm 310– 1070, 870 – 3000 rpm 310–1070, 870 – 3000 rpm
Drive motor
Power 7,5 kW (10.1 hp) 7,5 kW (10.1 hp) 3,2 kW (4.3 hp) 5,3 kW (7.1 hp) 5,3 kW (7.1 hp)
Feed
Longitudinal feeds 14* 0,03–0,3 mm/U 14* 0,03– 0,3 mm/U 20* 0,045 – 0,787 mm/U 20* 0,045 – 0,787 mm/U 20* 0,045 – 0,787 mm/U
14* (0.001–0.01”/rev) 14* (0.001– 0.01”/rev) 20* (0.002– 0.031”/rev) 20* (0.002– 0.031”/rev) 20* (0.002– 0.031”/rev)
Cross feeds 14* 0,015 – 0,15 mm/U 14* 0,015 – 0,15 mm/U 20* 0,023 – 0,406 mm/U 20* 0,023– 0,406 mm/U 20* 0,023– 0,406 mm/U
14* (0.0006–0.006”/rev) 14* (0.0006 – 0.006”/rev) 20* (0.0009 –0.0016”/rev) 20* (0.0009– 0.0016”/rev) 20* (0.0009 – 0.0016”/rev)
Thread cutting
Metric threads 14 (0,25–2,5 mm) 14 (0,25 –2,5 mm) 20 (0,4–7,0 mm) 20 (0,4–7,0 mm) 20 (0,4–7,0 mm)
14 (0.009– 0.09”) 14 (0.009 – 0.09”) 20 (0.016 – 0.28”) 20 (0.016 – 0.28”) 20 (0.016 – 0.28”)
Inch threads 9 (96 –12 Gg/Zoll) 9 (96–12 Gg/Zoll)
9 (96 –12 threads/inch) 9 (96–12 threads/inch) - - -
With gear set option, add.
Metric thread 13 (0,125 – 5 mm) 13 (0,125 –5 mm) 28 (0,4 –7 mm) 28 (0,4 –7 mm) 28 (0,4 –7 mm)
13 (0.005 – 0.2”) 13 (0.005 – 0.2”) 28 (0.02– 0.3”) 28 (0.02– 0.3”) 28 (0.02– 0.3”)
Inch thread 29 (76 – 4 threads/inch) 29 (76– 4 threads/inch) 32 (4 – 56 threads/inch) 32 (4 – 56 threads/inch) 32 (4 – 56 threads/inch)
Module thread 12 (0.25 –2.5) 12 (0.25 –2.5) 28 (0.2– 3.5) 28 (0.2– 3.5) 28 (0.2– 3.5)
Diam. pitch thread 25 (96 –11) 25 (96–11) 32 (8 –112) 32 (8 –112) 32 (8 –112)
Tailstock
Quill diameter 30 mm (1.2”) 30 mm (1.2”) 50 mm (2”) 50 mm (2”) 50 mm (2”)
Internal taper of quill MT 2 MT 2 MT 3 MT 3 MT 3
Quill travel 80 mm (3.1”) 80 mm (3.1”) 120 mm (4.7”) 120 mm (4.7”) 120 mm (4.7”)
Lateral adjustment +10/– 8 mm (+ 0.4/– 0.3”) +10/– 8 mm (+ 0.4/– 0.3”) +/–13 mm (+/– 0.5“) +/–13 mm (+/– 0.5“) +/–13 mm (+/– 0.5“)
Sound pressure level
Maximum sound pressure level to DIN 45635 77 dB(A) 77 dB(A) 79 dB(A) 79 dB(A) 79 dB(A)
Permissible workpiece weights
Floating 45 kg (99.2 lb) 45 kg (99.2 lb) 50 kg (110.2 lb) 50 kg (110.2 lb) 50 kg (110.2 lb)
With tailstock 80 kg (176.4 lb) 80 kg (176.4 lb) 150 kg (330.7 lb) 150 kg (330.7 lb) 150 kg (330.7 lb)
Digital read out
Basic machine No Standard No Standard Standard
Constant cutting speed No Integrated No Integrated Integrated
Electrical connection
Power supply 400 V/3 PE/50 Hz 400 V/3 PE/50 Hz 400 – 440 V/3 PE/50 Hz 400 – 440 V/3 PE/50 Hz 400 – 440 V/3 PE/50 Hz
Dimensions
Length of machine 1280 mm (50.3”) 1280 mm (50.3”) 1650 mm (65”) 1650 mm (65”) 1950 mm (76.8”)
Width of machine 730 mm (28.7”) 730 mm (28.7”) 1060 mm (41.7”) 1060 mm (41.7”) 1060 mm (41.7”)
Height of machine 1480 mm (58.3”) 1480 mm (58.3”) 1290 mm (50.8”) 1635 mm (64.4”) 1635 mm (64.4”)
Height of spindle center above floor 1100 mm (43.3”) 1100 mm (43.3”) 1130 mm (44.5”) 1130 mm (44.5”) 1130 mm (44.5”)
Total weight 243 kg (535.7 lb) 243 kg (535.7 lb) 725 kg (1598.3 lb) 755 kg (1664.5 lb) 865 kg (1907 lb)
Safety equipment CE-compliant CE-compliant CE-compliant CE-compliant CE-compliant
Technical data EMCOMAT 14DEMCOMAT 14S EMCOMAT 20DEMCOMAT 17S EMCOMAT 17D
*The number of feeds and the feed range can be extended with the change gears (Option).
EN33
81 .
06/0
7 ©
das
sel &
sch
umac
her,
mun
ich.
Sub
ject
to c
hang
e du
e to
tech
nica
l pro
gres
s. E
rrors
and
om
issi
ons
exce
pted
.
H E A D Q U A R T E R S :EMCO MAIER Ges .m.b .H . . Sa l zburger S t rasse 80 . A-5400 Ha l le in -TaxachP h o n e + 4 3 - 6 2 4 5 - 8 9 1 - 0 . F a x + 4 3 - 6 2 4 5 - 8 6 9 6 5 . e m a i l : i n f o @ e m c o . a t
EMCO has a global sales network. You can find the addresses at:www.emco.at
Submitted by:
Top Related