MEP Training Center
[email protected] Ph: 82033092Ko Wun Na PH:82033092
Electrical System Part 1of 2
MEP Training Center
Planning
Electrical Setting Required Lux Level Color fills and Schedules
Ko Wun Na PH:82033092
MEP Training Center
Electrical Setting
Correction Factor Wiring Type Voltage Definition Distribution System Load Calculation
Ko Wun Na PH:82033092
MEP Training Center
Required Lux Level
Project Parameter for Lighting Create Schedule Add space lighting Requirements Apply Lighting Level to space
Lux levels: Measurement for brightness. The higher the lux levels the brighter the light. 1 lux = 1 lumen / sq meter SS 531 - 1 : 2006 Code of practice for lighting of work places Indoor SS 531 - 2 : 2008 Code of practice for lighting of work places Outdoor Ko Wun Na PH:82033092
MEP Training Center1. Open a floor plan view or section view. Not in 3D 2. On the ribbon, click (Legend). Architect tab Room & Area panel (Legend) 5. Click in the drawing area to place the colour fill legend. 6. In the Choose Space Type and Colour Scheme dialog, select the space type and colour scheme, click OK. Ko Wun and Na PH:82033092
Color Fills
MEP Training Center Add Devices & Fixtures Create circuits ( w and w/o wire)-logical connections Create power load Check design using F9 Balancing , Breaker Sizing Create Panel Schedule Modeling for Tray & ConduitKo Wun Na PH:82033092
Designing
MEP Training CenterDB, Transformer(EE) Lighting Fixture(LF) ELV ( Fire Alarm, Speaker, Data Point , TV point) SSO, Junction Box1. 2. 3. 4. 5. 6. 7. Open View ( double-click Floor Plans) Home tab Electrical panel Type Selector Tag on/off Option Bar At Drawing move to valid area Click
Devices & Fixture
Ko Wun Na PH:82033092
MEP Training CenterClick the Flip Work Plane control to rotate the family instance 180 degrees about the x-axis of the work plane.
Devices & Fixture
Ko Wun Na PH:82033092