L 52
Ela
boIn
Fo
rm
1
2
3
4
5
6
7
8
9
12
10
13
15
11
14
5
2
3
6 7
43
9
81
12
14
10
13
15
16
1817
16
17
18
AUS
NOT
AUS
NOT
9
Equipment wagon, filing wagon Printer/PC wagon Overhead/demo wagon Measurement/test wagons
InForm equipment wagons use the same profile systems as InForm work-benches. We can deliver fully config-ured standard mobile units and bi-mo-bile units. Whilst the standard mobile units are completely assembled, the bi-mobile units can incorporate spe-cific, optional modules and thus be configured according to your needs upon request.
The available vertical profiles can be attached to the mobile unit frame using force or positive fit, so that subsequent extensions can be realised at any time with ease.
InForm complete mobile units
4_Inform_Mobile+.indd 52 02.05.2007 10:32:29 Uhr
L 53
1
2
3
4
5
6
7
8
9
12
10
13
15
11
14
5
2
3
6 7
43
9
81
12
14
10
13
15
16
1817
16
17
18
AUS
NOT
AUS
NOT
9
InForm bi·mobile units
Mobile unit frame Mobile unit frame with vertical profiles Equipment variations
Functional shelf, low
Functional shelf, tilting
Slanting functional shelf(can be used on both sides)
Wide drawer
Power supply duct
Chute rail, small complete with 7 storage boxes
Chute rail, large complete with 5 storage boxes(can be used on both sides)
Cable roll magazine(adjustable for different ø)
Measurement line holder
Handles, pivoting sockets
Shelf, folding
Cable holder
Multiple socket outlet
Line holder
Storage tray
Tool holder
Slanting shelf
4_Inform_Mobile+.indd 53 02.05.2007 10:32:37 Uhr
L 54
Ela
boIn
Fo
rm
...30
1000
1600
680
1400
All equipment wagons have a sturdy mobile frame made of aluminium profiles with 4 guide wheels (diameter 75mm, two of which are lockable), a large floor shelf with longitudinal edges made of aluminium grooved profile on both sides. The vertical profiles are prepared for holding a variety of swivel adapters or for additional vertical profiles.Plastic caps round off the profiles at the front.
The functional shelves can be tilted and the height adjusted infinitely within the vertical profiles. A fibre rail inserted at the front acts as an anti-slip edge. Both longitudinal edges of the function-al shelf include an aluminium grooved profile, on which additional storage trays, tool holders or slanting shelves can be mounted.
Equipment wagon attachments 77-3B and 77-3C are also fitted with a power supply duct to hold a System 110 power distribution unit; for the fitting slot-in panels please see the Elabo Electronics Order Catalogue. With a 5m power cable and a coiling device the attachments can be optionally supplied for an AC or 3 phase current connection (CEE connector).
Mobile frame with guide wheels and floor shelf
Vertical profile
Profile cover
Shelf element
Power supply duct
Functional shelf
Keyboard pull-out
Paper collection tray
InForm equipment wagons
4_Inform_Mobile+.indd 54 02.05.2007 10:32:41 Uhr
L 55
Functional shelf
Keyboard pull-out
Paper collection tray
InForm equipment wagons
Equipment wagon Technical details Width Depth Height Order no.
77-3A 780 x 700 x 1000 700 x 480 x 34 705 x 400 x 34
InForm equipment wagon1 floor shelf, fixed 2 functional shelves, adjustable
Equipment wagon attachment
Technical details Width Depth Height Order no.
77-3B
77-3C
780 x 400 x 30 705 x 120 x 115
705 x 400 x 34
780 x 400 x 600
780 x 400 x 600
InForm equipment wagon at-tachment fits 77-3A1 shelf element1 power supply duct 4 WU110 1 functional shelf
for AC connection with Schuko (type F) plug
for 3 phase current connection with CEE plug
Printer wagonTechnical details Width Depth Height Order no.
77-3F 780 x 700 x 680
700 x 480 x 34 705 x 400 x 34
520 x 370 x 100
InForm printer wagon for A3 printer 1 floor shelf, fixed1 functional shelf with paper slit 1 paper collection tray, for
hanging, can be lowered beneath floor shelf
Note:6 x socket outlet 81-2D Z01
PC attachment Technical details Width Depth Height Order no.
77-3G 780 x 400 x 720
705 x 400 x 120
705 x 400 x 34
Dimensions in mm
InForm PC attachment fits printer wagon 77-3F1 receptacle structure for PC station with installed keyboard pull-out (adjustable)1 functional shelf
Infinite adjustment for optional sitting or standing operation
4_Inform_Mobile+.indd 55 02.05.2007 10:32:42 Uhr
L 56
Ela
boIn
Fo
rm
Complete PC wagons with a height-adjust-able and tilting functional shelf for position-ing the monitor.Additional height-adjustable and tilting functional shelf with pull-out keyboard shelf, height-adjustable and pivoting (350°), incli-nation can be set by ± 15°. Keyboard shelf made of moulded plastic 550 x 265mm with 440mm slide rails.The shelf is fitted with a cushion for suppor-tung your hands and a pull-out mouse shelf. The PC bracket 78-3W for holding the PC is mounted on the right-hand side on the verti-cal profile.
The PC wagon has a 3 x socket outlet with a 5m connecting line and cable holder for connecting equipment.A DIN A4 printer can be positioned close at hand on the equipment platform 78-3P.
Werrrcfadshg blj
mlkfdbvpiuynv
nvl<s
Werrrcfadshg blj
mlkfdbvpiuynv
nvl<siufo
bkjh
InForm PC wagon
InForm complete PC wagon with 2 functional shelves, keyboard pull-out, printer shelf and 5m connecting cable, all shelves height-adjustable and tilting.
780 x 700 x 1000 77-3H
Technical details Width Depth Height Order no.Complete PC wagon
Dimensions in mm
4_Inform_Mobile+.indd 56 02.05.2007 10:32:46 Uhr
L 57
InForm equipment wagon for 19” modules
R
Equipment wagon Technical details Width Depth Height Order no.
77-3V
77-3W
580 x 700 x 1495
580 x 700 x 1495
Dimensions in mm
For Elabo 19” modules, with drawer, functional shelf and System 110 power supply duct to hold slot-in panels of max. 3 width units of System 110 (WU110). 5m connecting line with Schuko (type F) plug and cable holders.
As above, but for 3 phase cur-rent connection with CEE plug
The InForm equipment wagon 77-3V/W is specially designed to hold Elabo 19” modules.
As well as a drawer with security lock and an adjustable functional shelf, the equipment wagon is also fitted with a System 110 alu-minium duct to hold 3 width units of System 110.
The mobile frame and floor shelf are designed as for the InForm equipment wagon, except that the wheel diameter is 100mm. Elabo 19” modules of up to 8 HU can be placed on the shelf above the drawer without slipping.
With a 5m long connecting line and 2 cable holders, the equipment wagon can be sup-plied optionally for AC or 3 phase current connection.
As equipment wagons are often loaded with high-voltage test instruments and their accessories, additional fixing ledges are fitted for cable routing. A storage tube is also included in the delivery for holding test guns and test probes.
4_Inform_Mobile+.indd 57 02.05.2007 10:32:53 Uhr
L 58
Ela
boIn
Fo
rm
The movable test mobile units make it possible to perform on-site tests with ease, for instance in production. The mobile frame, floor shelf and functional shelf are designed as the InForm equip-ment wagons. The mounted racks can be equipped with slide-in units, cassettes and slot-in panels as required.
Under the rack there is an additional duct to hold System 110 power distribu-tion units. With a 5m power cable along with coiling device, the mobile units can optionally be supplied for AC or 3 phase current (CEE) connections.
Slot-in panels and slide-in units for In-Form mobile units 266/110 in the Elabo Electronics Order Catalogue.Modules for the InForm 19” mobile units can also be found in the Elabo Electronics Order Catalogue and the Elabo Equipment Catalogue TestSys-tems.
InForm test mobile units
4_Inform_Mobile+.indd 58 02.05.2007 10:32:58 Uhr
L 59
Dimensions in mm
AUS
NOT
AUS
NOT
AUS
NOT
AUS
NOT
AUS
NOT
AUS
NOT
InForm mobile unit 266/110
System 266 and System 110 power supply duct.
The module is suitable for holding 6 width units of System 266 (WU266) and 4 width units of System 110 (WU110).
For AC connection with Schuko (type F) plug
For 3 phase connection with CEE plug
Technical details Width Depth Height
760 x 700 x 1300
760 x 700 x 1300
Order no.
77-3P
77-3Q
InForm test mobile units
InForm 19” mobile unit
Technical details
The module is suitable for hold-ing 19” slide-in units conforming to DIN 41 494.Module height: 12 HUModule depth: 515mm1 power supply duct for holding 3 width units of System 110 (WU110).
For AC connection with Schuko (type F) plug
For 3 phase connection with CEE plug
Width Depth Height
530 x 700 x 1600
530 x 700 x 1600
Order no.
77-3T
77-3U
InForm mobile unit 266/110
System 266 and System 110 power supply duct.
The module is suitable for hold-ing 12 width units of System 266 (WU266) and 4 width units of System 110 (WU110).
For AC connection with Schuko (type F) plug
For 3 phase connection with CEE plug
Technical details Width Depth Height
760 x 700 x 1600
760 x 700 x 1600
Order no.
77-3R
77-3S
Width Depth Height
4_Inform_Mobile+.indd 59 02.05.2007 10:33:01 Uhr
L 60
Ela
boIn
Fo
rm
The mobile demo bench is fitted with a cabinet with ei-ther drawers or swing doors. The bench design corre-sponds to that of the bench model with reinforcement beam and double guide wheels of 100mm diameter.
A double-row frame attachment for experiment boards of DIN A4 height can be added to the demo bench as an attachment element, optional with or without power supply duct. System 110 equipment is installed (please see Elabo Electronics Order Catalogue).
InForm demo wagon
4_Inform_Mobile+.indd 60 02.05.2007 10:33:06 Uhr
L 61
R
R
R
Demo wagon Technical details Width Depth Height Order no.
77-7A 1200 x 800 x 895With opening cable duct cover, cable duct, reinforcement beam and double guide wheels. A lockable under-bench cabinet is installed with 3 drawers and pull-out shelf 71-1E
Demo wagon Technical details Width Depth Height Order no.
77-7C 1200 x 800 x 895As above, but with swing door cabinet with central wall, lockable, shelves covered with grooved mats, to store DIN A4 experiment boards on two levels.
Demo wagon attach-ment
Technical details Width Depth Height Order no.
77-7F
77-7G
1200 x 123 x 1024
1200 x 123 x 874
InForm frame attachment for 2 levels of DIN A4 experiment boards with power supply 11-3G, 11-4B, 11-3K and 3m connecting cable for 3 phase current with 16A CEE plug and cable holder.
Frame attachment as above, but without power supply duct and connecting cable
Dimensions in mm
InForm demo wagon
4_Inform_Mobile+.indd 61 02.05.2007 10:33:11 Uhr
L 62
Ela
boIn
Fo
rm
InForm bi-mobile units can be equipped with a variety of func-tional elements.
The mobile unit frame can be extended at any time by adding vertical profiles using InForm Open Space Technology. This means that you can carry out flexible upgrading whenever necessary.
All wagons are fitted with a large floor shelf and 4 double guide wheels of 75mm diameter.
The selection diagram for modules and accessories illustrates very clearly the system quality of InForm bi-mobile units. The resulting range of variations leaves nothing to be desired.
For example, the useful cable roll holder combined with the slanting shelf make a practical wagon for keeping all equipment nearby when performing wiring work in tool and switching cabi-net building.
The supporting rolls have guide grooves for rolls and cable wires. This allows a time-saving removing of individually cable rolls.
The guide rolls can be labelled using removable labels and a waterproof pen.
InForm bi·mobile units
4_Inform_Mobile+.indd 62 02.05.2007 10:33:16 Uhr
L 63
Mobile unit frame Technical details Width Depth Height Order no.
77-5A 860 x 700 x 1000InForm mobile unit frame with large floor shelf, 4 double guide wheels of 100mm ø, 2 of which are lockable.
For variable installation of vari-ous functional elements as per the diagram on page 70.
Inner installation height available approx. 8 HU
Vertical profile 1 Technical details Width Depth Height Order no.
77-5B 34 x 123 x 450
1450
InForm vertical profile 1, for attachment to the mobile unit frame, comprising 2 aluminium profiles with powder coating, including fastening fittings and profile covers.
For additional inner installation height approx. 4.5 HU
Total height with mobile unit frame
Vertical profile 2 Technical details Width Depth Height Order no.
77-5C 34 x 123 x 700
1700
Dimensions in mm
InForm vertical profile 2, design as vertical profile pair 1
For additional inner installation height approx. 7 HU
Total height with mobile unit frame
Please state colour option
InForm bi·mobile units
4_Inform_Mobile+.indd 63 02.05.2007 10:33:17 Uhr
L 64
Ela
boIn
Fo
rm
303030
Functional shelf Technical details Width Depth Height Order no.
77-5E 786 x 400 x 34InForm functional shelf, infinite height adjustment, can be tilted by ± 30°, both longitudinal sides with aluminium extruded profiles with screw channels, integrated anti-slip edge, incl. fastening materialColour light grey,approx. installation height 3 HU
Functional shelf
Low version
Technical details Width Depth Height Order no.
77-5F 786 x 600 x 34InForm functional shelf, large, design as above but not tilting, without anti-slip edge.Colour light grey,approx. installation height 2.5 HU
Functional shelf
Slanting version
Technical details Width Depth Height Order no.
77-5G 786 x 340 x 208
Dimensions in mm
InForm slanting functional shelf, for storing cables, chutes, tools, etc. with 2 longitudinal aluminium profiles with screw channel, rounded off aluminium bottom plate, all parts powder-coated.Colour light grey,approx. installation height 3 HU
InForm bi·mobile unit shelves
4_Inform_Mobile+.indd 64 02.05.2007 10:33:20 Uhr
L 65
7
∅199
7
∅199
7
∅199
InForm bi·mobile unit bin rails, cable roll magazine
Small bins Technical details Width Depth Height Order no.
77-5J
95 x 160 x 75 786
InForm bin rail, small, complete with 7 storage bins made of plastic, mounting rail made of steel plate, can be mounted on one or both sides of vertical profile, colour light grey
Storage bin outer dimensions Chute rail
approx. installation height 1.5 HU
Large bins Technical details Width Depth Height Order no.
77-5K
140 x 230 x 130 786
InForm bin rail, large,complete with 5 storage bins made of plastic, mounting rail made of steel plate, can be mounted on one or both sides of vertical profile, colour light grey
Storage bin outer dimensions Chute rail
approx. installation height 2 HU
Roller rail Technical details Width Depth Height Order no.
77-5L
77-5M
786 x 200 x 70
25.4 x 10
Dimensions in mm
InForm cable roll magazine with 3 x roller rail for 8 cable rolls of 200mm ø, can be adjusted for 8 cable rolls of 150mm ø, suitable for plastic rolls with uniform roll width of 79mm, approx. installation height 3 HU189 labels on DIN A4 sheet, incl. felt-tip pen (no illustration).
4_Inform_Mobile+.indd 65 02.05.2007 10:33:30 Uhr
L 66
Ela
boIn
Fo
rm
R
For organisation elements for wide drawers, please see Elabo Cabinet Systems.
R
R
InForm bi·mobile units measurement line holder, System 110 power supply duct
Measurement line holder
Technical details Width Depth Height Order no.
77-5P77-5Q
786 x 220 x 320 786 x 420 x 320
InForm measurement line holder with storage tray 83-6L, cable holder 83-6J and hanging device 83-6K
Equipped on one sideEquipped on both sides
approx. installation height 3.5 HU
Power supply duct Technical details Width Depth Height Order no.
77-5R77-5S
786 x 120 x 115 786 x 120 x 115
System 110 power supply duct suitable for 5 WU110 .Complete with 2.5m connecting cable, incl. cable holder 78-4E.
Connecting cable with:Schuko (type F) plugCEE plug
approx. installation height 1.5 HU
Wide drawer Technical details Width Depth Height Order no.
77-5U 786 x 450 x 160
Dimensions in mm
With security lock, wooden body made of 19mm impact-resistant edge veneer, post-formed face with steel handle, organisation drawer made of steel plate with telescopic full extension.
approx. installation height 2.5 HU
4_Inform_Mobile+.indd 66 02.05.2007 10:33:36 Uhr
L 67
InForm bi·mobile units hanger profile, perforated hanging plate
Hanger profile Technical details
InForm aluminium hanger profile, anodised with fastening fitting, for mounting on vertical profile(e.g. 3 profiles for 2 levels of DIN A4 or for perforated hang-ing plate)
Width Depth Height
786 x 18 x 35
Order no.
77-5W
Perforated hanging plate
Technical details
InForm perforated hanging plate made of 1.5mm steel plate with 5 x 10mm perforation, vertical standing and 3mm bar, panel white powder-coated, fits in 2-level frame.(3 hanger profiles 77-5W required)
Width Depth Height
766 x 45 x 690
Order no.
77-5X
4_Inform_Mobile+.indd 67 02.05.2007 10:33:39 Uhr
L 68
Ela
boIn
Fo
rm
R
R
Mobile unit 1 Mobile unit 2 Mobile unit 3
Mobile unit 4 Mobile unit 5 Mobile unit 6
Mobile unit 7 Mobile unit 8 Mobile unit frameH = 1000mm (8 HU)
Mobile unit frame + vertical profile 1H = 1450mm (12.5 HU)
Mobile unit frame + vertical profile 2H = 1700mm (15 HU)
Mobile unit frame + 2 x vertical profile 1H = 1900mm (17 HU)
InForm bi·mobile units example orders
4_Inform_Mobile+.indd 68 02.05.2007 10:33:43 Uhr
L 69
InForm bi·mobile units example orders
Mobile unit 1
1 InForm mobile unit frame2 roller rails2 slanting shelves
Page
636564
Order no.
77-5A77-5L77-5G
Mobile unit 2
1 InForm mobile unit frame6 chute rails, small4 chute rails, large
Page
636565
Order no.
77-5A77-5J77-5K
Mobile unit 3
1 InForm mobile unit frame1 functional shelf, large2 wide drawers
Page
636466
Order no.
77-5A77-5F77-5U
Mobile unit 4
1 InForm mobile unit frame1 vertical profile 2 (7 HU)6 roller rails1 reinforcement beam
Page
63636571
Order no.
77-5A77-5C77-5L77-5V
Mobile unit 5
1 InForm mobile unit frame1 vertical profile 2 (7 HU)3 aluminium profiles (DIN A4)1 perforated plate frame1 functional shelf, large2 slanting shelves
Page
6363676764 64
Order no.
77-5A77-5C77-5W77-5X77-5F77-5G
Mobile unit 6
1 InForm mobile unit frame1 vertical profile 2 (7 HU)1 measurement line holder
Page
636366
Order no.
77-5A77-5C77-5P
Mobile unit 7
1 InForm mobile unit frame1 vertical profile1 (4.5 HU)1 roller rail1 power supply duct1 functional shelf1 wide drawer1 reinforcement beam
Page
63636566646671
Order no.
77-5A77-5B77-5L77-5R77-5E77-5U77-5V
Mobile unit 8
1 InForm mobile unit frame1 vertical profile 1 (4.5 HU)2 chute rails, small1 roller rail 1 power supply duct2 slanting shelves1 wide drawer1 reinforcement beam
Page
636365656664 6671
Order no.
77-5A77-5B77-5J77-5L77-5S77-5G77-5U77-5V
4_Inform_Mobile+.indd 69 02.05.2007 10:33:48 Uhr
10
2
10
21
02
31
02
3
10
10
21
02
10
23
10
10
23
10
2
1000
1450
1700
700 860
10
23
45
67
8HE
34160
208
115
34170
212
320
130
75
1011
1213
1415
67
89
1011
12HE
1
1
3
5
2
4
6
7
9
8
2
3
4
5
6
7
8
8
9
10
10
6HE
78
9
700
67
8H
E
10
235
The patented design of Elabo InForm Open Space Technology allows the InForm vertical profiles to be continued upwards endlessly using force-fit and positive-fit. Thus the extendable mobile unit frame can be adapted with vertical profiles 1 or 2 at any time.
The available attachments and accessories can be mounted within the system profile at any height you wish, meaning that the configuration of the InForm mobile units always remains unrestricted and vari-able.
InForm bi·mobile units
Available installation height in HU(1 HU = 1 height unit equals approx. 100mm)
Total size in mm
To help you with planning and defining your concept, mobile unit frames, vertical profiles and modules are divided into height units (suggested installation space).If required, InForm bi-mobile units can also be set up to be much more compact, thanks to the unlimited assembly pos-sibilities (please see construction height dimensions).
Functional shelf, large77-5F (2.5 HU)
Slanting functional shelfCan be used from both sides77-5G (3 HU)
Power supply duct77-5R/S (1.5 HU)
Chute rail, large77-5K (2 HU)
Measurement line holder77-5P/Q (3.5 HU)
Functional shelf, tilting77-5E (3 HU)
Wide drawer77-5U (2.5 HU)
Chute rail, small77-5J (1.5 HU)
Cable roll magazine 77-5L (3 HU)
Reinforcement beam(only necessary in exceptional cases)
Practical installation space in HU for modules
Construction element height in mm
L 70
4_Inform_Mobile+.indd 70 02.05.2007 10:33:50 Uhr
Elabo InForm mobile units can be supplemented with accessories ac-cording to your needs.
Special sliding nuts allow positioning at any point of the system profile.
InForm mobile units can be con-structed in a highly individual way thanks to unrivalled design flexibility.
Handle78-4UMade of black plasticLength 170mm
ShelfFolding78-3P/QSee page 106
Multiple socket outlet 81-2CZ01 /2DZ01See page 109
Cable hanging device 83-6KSee page 107
Line holder83-6JSee page 107
Pivoting socket78-3D /78-4B
See page 102/103Clamp adapter or
swivel adapter78-3E/78-4D
See page 102/103
Storage tray83-6L
See page 96
Tool holder81-8P/8Q
See page 96
Slanting shelf75-6N
See page 93
Reinforcement beamMade of steel plate
Light grey powder-coated77-5V
L 71
4_Inform_Mobile+.indd 71 02.05.2007 10:33:51 Uhr
Top Related