Portable And Above Ground Wash RackSmall Wash Racks To Large Wash Racks
Hydropads Are Easily Customized For Your Application
Confidentiality Notice: This presentation is for the sole use of the intended recipients and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited.
Different Sizes and Weight Ratings2 ton per axle to 30 ton per axle
2438mm to 6096mm width 2286 length. bolt together to make a Hydropad as long as you choose
7315mm width to accommodate ultra class machines requires special order
Why Hydropads™ Versus Concrete ConstructionA wash pad that can be placed on any compacted surface
In Most Cases:
No ConstructionNo ArchitectureNo Permitting
No Delays
Replaces the need for a cement wash pad Won’t crack like a cement wash pad Safer than a cement wash pad. Oils and solid contaminants flow from the work area. Can handle the weight of an Ultra Class machine Ships in a container, Transports on a flatbed Manufactured under strict tolerances and shipped to the jobsite to be assembled. Bolt together Sustainable: Re-locatable in the event mining operations move or mine site is depleted. No
monument is left behind.
How Does A Hydropad™ Work
It’s simple! As you wash vehicles or equipment, dirt, dirty water, soap and oils fall to the solid top surface of the Hydropad. Everything that falls onto the Hydropad first flows into channels just below the standing area. These channels then take fluids and debris into a side gutter.
Because , dirt, dirty water, soap and oils flow off the Hydropad via channels, this provides a much safer non skid walking surface than any solid flat surface could. The Hydropad solid top is coated with an abrasive non skid surface.
There are many gutter configurations designed to assist in the removal of solids that have reached the gutter. These range from manual removal to fully automatic.
• Hand shovel gutters• Gutter flushing into drive in clean out trays• Drag conveyors in the gutter
HYDROBLASTERHIGH-PRESSURE CLEANING SYSTEMS
• From 2GPM to 10GPM
• 1000PSI to 5000PSI
• Electric, Gas or Diesel Powered
• Stationary or Portable, trailer mounted
• NG, LPG,OIL fired
• Variable Pressure Dual Wand
• Local and Remote Operation
• Full Safety Features
• UL-1776, CSA and CE Certified
Hot or cold water cleaning systems
LOW PRESSURE HIGH VOLUME DEMUCK SYSTEM
60GPM 200PSI
Hydrokleen Water Filtration SystemsOur Reclaim / Recycling Or Pretreatment Systems Are Expandable High Flow oil/water separator, bacterial odor
control, coalescing, skimming, hydrocarbon, heavy metals and light fuels removal in dual polishing loops.Systems are design to meet your needs and specifications using our standard design and customized using our
option tree
Numerous Configurations and Components Designed To Meet Your Operational Needs
Certified to CE and UL standards Overflow protection Self-cleaning tanks Gravity flow-through design Cone bottom primary solids settling tank 76,896 sq. in. of oil coalescing plates Several different media choices are
available in each of the two polishing loops. Media choices are determined by the waste stream being treated and include specialized materials to remove solids, hydrocarbons, and metals.
Oil belt skimmer with oil/water decanter PLC controls daily operation and
maintenance functions Optional remote operation monitoring, with
data logging and alert messages delivered by e-mail to your computer or phone.
Hydro BiodigestersWastewater filtration systems generally cannot remove odors present in processed or filtered water. Decomposition of matter by
naturally occurring bacteria and/or chemical reactions will release gases (H2S) to the atmosphere that have a very offensive smell .Hydro
Engineering’s Hydro Biodigesters (HBD) is the answer to control of odor in waste water.
In compliment to Hydro Engineering’s superior filtration products, our Hydro- Biodigesters (HBD) product eliminates industrial wastewater odors by out competing the natural occurring bacteria.
Biodigesters (affectionately referred to as “bugs”) are a combination of all natural bacteria, lab grade purified enzymes with micro and macro nutrients. HBD bacteria and enzymes are targeted to the food sources available in a wastewater treatment system. By out competing the natural occurring bacteria for the food sources, odor causing bacteria die off and thus the objectionable smell is eliminated.
Biodigesters are so prolific they multiply by double every 15-20 minutes. Start out with one cell in fifteen minutes you have two and so on. In 8 hours you have 17-million and in twenty-four hours you have a 1 with one hundred and twenty six zeros behind it. They simply out number any existing bacteria.
Suspension liquid enables programmable dosing Safe to use. All Hydro-Biodigester products are guaranteed pathogen free; every batch is checked for it's purity. Our bacterial
strains are Not Genetically Engineered , they are all naturally occurring strains. They are FDA and GRAS listed as safe Benefits Ozone and Corrosives Don’t Provide:
Ozone, chlorine and hydrogen peroxide do nothing to aid the wastewater treatment system. HBD’s breakdown and consumption of contaminants such as organic matter, oils, grease and other hydrocarbons like dissolved solvents, heavy and light fuels are an added side benefit to using our product.
They propagate the sumps bottom solids reducing them and liberating oils and grease. In most cases making the sludge removal process non-hazardous, eliminating waste hauling fees. Our bacteria take up residence in the entire system constantly eating it clean, media filter changes are reduced, coalescing plates are kept clean, pipes and valves don’t plug up.
Hydro-Biodigesters enzymes and microorganisms work in concert to digest long chain hydrocarbons, light fuels, sludge, grease and any decomposing organic matter. The result is a significant reduction of BOD/COD and TSS. The byproducts produced from this biological transformation are absolutely harmless and “stink” free – only carbon dioxide and water remain.
Hydrosite
The Hydrosite Enclosure is a portable, transportable, insulated, Environmentally Controlled Equipment Enclosure specially designed to contain, support and protect equipment used for high‐pressure hot water/cold water decontamination, wastewater pre‐treatment, wastewater filtration/polishing, associated equipment, and commodities
Hydrosite System Enclosure Manufacturing Standards:
•ISO/TC‐104•668 ‐ Dimensions and Ratings, 1496/2 ‐ Specifications and Testing, 1171 ‐ Specification of Corner Fittings•CSC – In compliance with “International Convention for Safe Containers”•U.I.C. – Registered with “International Union of Railways”•Compliance with B.S. 3755‐1964 or equivalent•Heat Leakage: Maximum 22 Kcal/hr. ºC at mean insulation wall temperature of 20ºC•Applicable Federal and Military Specification Standards:•While not limited to, the following Federal and Military specifications and standards are specifically incorporated by reference to ensure compliance of the product with military operation requirements:•ASTM A 36/A, 36M•ASTM D 1785•MSS SP‐69•NEMA ICS 1•NEMA MG 1
Hydrosite Portable Equipment Enclosure
• Equipment mounted at factory•Wired complete•Plumbed complete•Factory installed and tested•Portable •Insulated•HVAC•Installation is, Place on level surface, Supply Power and Water to the Utility Hub on the Outside.
•Sustainable•No construction. Replaces the need for a brick and mortar equipment room•No monument left behind when mine site is depleted.
Pick Points Four CornersFour easy transportation :
Solids Removal System
Once the mud, dirt and other contaminants are washed from the equipment and flow from the top deck
of the Hydropad to the side gutter a number of options are available. In Gutter Conveyor System In Ground Solid Settling Tank with Automatic Drag Conveyor Above Ground Drive in Clean out Tray Above Ground Multiple Weir Solid Settling Tank SST Solid Settling Tank as part of your filtration system
When selecting a solids removal system we need to consider the amount of solids and contaminants
Collected along with the water volume generated by the wash system.
On a scale of 1 to 5 how will you rate the amount of solids being collected? 1 being the least?
AUWSAutomatic Undercarriage Wash
88 Nozzles/4.5GPM(17lpm) Ea/37PSI (2.5bar) 3 dimensional spray patternSolids Settling and Removal System
Solids Removal SystemDrag Conveyor in the Side Gutter
A Complete Above Ground Collection and Solids Removal System
Top Related