Growing concerns over poor air quality and the government’s drive to reduce carbon emissions are leading to increased interest in Hydrogen fuel cell technology. Chemical energy in the Hydrogen is stored under high pressure and converted into electrical energy via an electrochemical process produced by the fuel cell.

Reducing the pressure from high pressure containers, typically 350bar (5,075psi) or 700bar (10,150psi), down to lower pressures to feed the fuel cell requires a pressure regulator with a range of features that provide accurate and stable control under varying operating conditions.

Pressure Tech’s range of regulators cover various applications depending on factors such as flow rates to the fuel cells, and ultimately, energy output requirements. The MF-101 and MF-230 provide stable outlet pressure under decaying supply conditions, ensuring maximum use of the stored Hydrogen.

DRIVING THE FUTURE: Hydrogen Fuel Cell Regulators

Pressure Tech have also developed a compact regulator weighing less than 300g for use on UAV Drones. Its unique design accurately controls from 300bar (4,350psi) to 0.5bar (7psi) in a single-stage pressure reduction, and has been tested down to -40°C.

To discuss how Pressure Tech can support your Hydrogen fuel cell application, call the office directly on +44 (0)1457 899 307 or send an email to sales@pressure-tech.com.

Unit 24, Graphite Way, Hadfield, Glossop, Derbyshire, UK, SK13 1QHT +44 (0)1457 899 307 E sales@pressure-tech.com W www.pressure-tech.com

MF-101Max Inlet: 414bar (6,000psi)Max Outlet: 35bar (500psi)Port Size: 1/4” NPTCV: 0.5Self-Venting / Non-Venting

MF-230Max Inlet: 230bar (3,300psi)Max Outlet: 10bar (145psi)Port Size: 1/2” NPTCV: 1.0Non-Venting

MINI-300Max Inlet: 300bar (4,350psi)Max Outlet: 100bar (1,450psi)Port Size: 1/8” NPTCV: 0.06Non-Venting

DESIGNED AND BUILT IN THE UK

MINI-301: DRONE REGULATOR

MINI-300

MF-101

MF-230

LIGHTWEIGHT DRONE REGULATOR STABLE OUTLET PRESSURE UNDER DECAYING SUPPLY CONDITIONSMF-101 / MF-230:

REV

B