STRENGTH | INNOVATION | PERFORMANCE
P R O D U C T C A T A L O G
Company Overview ...............................................1Manufacturing ......................................................2QA/QC ...................................................................2Engineering ..........................................................2Facilities and Service Centers .................................3Standard Stabilizers ..............................................4Directional and Horizontal Stabilizers ...................5Integral Blade Stabilizers ......................................6Sleeve Type Stabilizers...........................................7Custom Motor/MWD and RSS Sleeve Stabilizers ....8Hardfacing ............................................................9Non Magnetic Drill Collars ...................................10Steel Drill Collars .................................................11Roller Reamers .............................................. 12-13Hole Openers ................................................. 14-15Pup Joints/Rotary Subs/Side Entry Subs, Reduced Section Subs, Crossover Subsand Top Drive Saver Subs ....................................16Circulating Subs/Lift Subs/Thread Protectors,Lift Bails and Lift Caps .........................................17
TABLE OF CONTENTS Reduced Section Sub - page 16
Drill Pipe- Premium Tools
Welded Blade Stabilizer - page 4
Steel Drill Collar - page 11
Pup Joint - page 16
Spiral Drill Collar - page 11
Non-Magnetic Drill Collar - page 10
Crossover Sub - page 16
Integral Blade Near Bit Stabilizer - page 4
1
DRILLING TOOLS INTERNATIONAL: AN OVERVIEWSince 1984, Drilling Tools International, Inc. has been the leading provider of downhole drilling tools to the global land and offshore markets. Our commitment to Strength, Performance, and Innovation is what separates us from our competition and drives us to deliver the most superior products and service.
With facilities strategically located throughout the world, we have the inventory and capacity to service our customers in a timely and efficient manner, 24 hours a day, 7 days a week. Our robust fleet includes a complete line of stabilizers, non-magnetic drill collars, pony collars, sub assemblies, steel drill collars, reamers, and drilling accessories.
Our goal is to exceed customer expectation with world class service and support while delivering reliable and innovative products for all drilling applications in today’s market without compromising on performance. That is why Drilling Tools International is on the cutting edge of the oil and gas marketplace, developing performance enhancing tools specifically designed to improve drilling and production operations.
Drilling Tools International is committed to the safety of your employees and operations. We work diligently to ensure that we have identified and controlled exposures in our operations that can injure, interrupt production, or damage property, equipment, and material while remaining compliant with federal, state and local regulations.
2
MANUFACTURING, QA/QC, and ENGINEERINGManufacturing Located in Louisiana on a ten-acre site, our 30,500 square foot product center is a state-of-the-art manufacturing facility offering multiple hollow spindle lathes, CNC mills (accommodating up to 36” inch OD stabilizers), rack systems, lathes – both CNC and manual – and in-house drill collar spiraling services. Our product center also features a machine shop that can rework drill collars and heavy weight drill pipe; spiraling of drill collars, and anti-galling zinc phosphate application of threaded connections. We also have the ability to fabricate welded-blade stabilizers, provide stabilizer blade grinding up to 42” OD, and hardfacing in five different options which ensure precision and increase the life of your downhole tool. Our manufacturing center is committed to producing reliable, quality tools with unparalleled customer service. That’s why more than 70% of our downhole tools utilized on international projects are from repeat customers.
QA/QCOur Quality Management System is certified in compliance with ISO 9001 and API Spec Q1. Our manufacturing center is certified in API Spec 7-1 and complies with the threading and gauging requirements of API Spec 7-2. The scope of our API Spec 7-1 license includes the manufacturing of drill stem subs, drill collars, stabilizers, and threading for rotary shouldered connections. Our commitment to quality guides all of our processes starting with planning and process control to delivery. Our Quality Management System ensures that we consistently manufacture defect-free products and accessories on-time, every time.
Engineering CapabilitiesTechnical oversight of each product’s specifications is provided by our in-house professional engineer and a team of technical staff. Models of each product are generated in 3D using the latest modeling software which are then used to create manufacturing drawings for shop use and inspections. The engineering and quality departments work hand-in-hand to ensure reliability and durability, as well as the efficient manufacturing of all DTI products. The engineering team is also involved in providing technical customer support and participating in forensic investigations.
3
FACILITIES and SERVICE CENTERS With eight domestic US facilities and three international locations, we are uniquely positioned to efficiently satisfy the needs of our customers. Due to our network of locations and inventory across the globe, we are able to deliver unsurpassed quality and 24/7 service. We understand how costly it can be when drilling operations are put on hold. That’s why we work diligently to ensure our customers always have access to the products and tools that they need to complete their projects on time.
Through our state-of-the-art manufacturing facilities we are able to manufacture innovative and quality products to enhance your drilling performance. We also have the ability to refurbish and rent a wide variety of downhole tools and accessories for the global market.
Casper, WY
Charleroi, PA
Dubai, UAE
Broussard, LA
Midland, TX
Newfoundland, Canada
Oklahoma City, OK
Houston, TX
4
STANDARD STABILIZERS*
Specifications • Three blades x 270-degree wrap • Longer crown lengths • Typically highest total flow area (TFA) • Most meet API 7-1 stabilizer dimensional requirements • Hardfacing on crown and leading edges
Used primarily in rotating application
INTEGRAL BLADE SPIRAL STRING STABILIZER
Only used at the bit Specifications • Like a three-blade spiral string, but with: - Box connections both ends - Bore for float on bottom end • Typically highest total flow area (TFA) • Most meet API 7-1 stabilizer dimensional requirements • Hardfacing on crown and leading edges
INTEGRAL BLADENEAR BIT STABILIZER
For large diameter holes Specifications • Three or four blades, usually straight • Hardfacing on crown and leading edges
WELDED BLADESTRING STABILIZER
* There are other types of integral and welded stabilizers that are used less frequently
5
DIRECTIONAL and HORIZONTAL STABILIZERS*
INTEGRAL BLADEAUTOTRAC STABILIZER
Integral blade spiral stabilizer with short crown length and long smooth taper angles
Used to reduce vibration and torque leading to great reliability of downhole tool life on MWD, LWD, Mud Motor, and RSS assemblies
Integral blade spiral stabilizer with medium crown length and shorter taper angles
Straight blade stabilizer used to maintain directional control during sliding operations
Specifications • Four or five blades x tighter spiral with 300–330 degrees • Short crown length • Low flow area (TFA) • Smooth transitions each end of crown • Hardfacing on crown and both leading and trailing taper angles • Used in rotating and sliding applications (used in both directional and horizontal applications)
Specifications • Three blades with 270-degree spiral • Medium crown length • Medium flow area ( TFA) • Hardfacing on crown and both leading and trailing taper angles • Used in both directional and horizontal applications
Specifications • Three or four straight blades • Short crown length • Medium to high flow area (TFA) • Hardfacing on crown and both leading and trailing taper angles • Used in both directional and horizontal applications
INTEGRAL BLADED-TRAC STABILIZER
INTEGRAL BLADENORTRAC STABILIZER
* There are other types of integral and welded stabilizers that are used less frequently
6
INTEGRAL BLADE STABILIZERSOur integral blade stabilizer sets the standard in both directional and straight hole drilling applications. The all-in-one construction makes it an industry workhorse – able to perform in the most rugged and abrasive drilling conditions. Milled directly into a steel forging, the one-piece rotating stabilizer can be run near the bit or up in the drill string in soft to medium and abrasive formations.
With our unique hardfacing capabilities, this tool can be dressed with five hardfacing materials, including HF2000 for soft formations and HF3000 for non-magnetic stabilizers. In hard or abrasive formations, HF5000, HF6000 and HF6500 hardfacing will extend this tool’s lifespan by 3x–5x longer making it a very economical choice.
Hole Size(in)
6”– 6 3/4”7 5/8”– 8 1/2”
9 5/8”– 12 1/4”14 3/4”– 17 1/2”
20”– 26”
StandardDC
Size(in)
4 1/2”– 4 3/4”6 1/2”
8”9 1/2”9 1/2”
WallContact
(in)16”16”18”18”18”
BladeWidth
(in)2 3/16”2 3/8”3 1/2”
4”4”
FishingNeck
Length(in)28”28”30”30”30”
BladeUndergauge
(in)-1/32”-1/32”-1/32”-1/16”-1/16”
String
74”75”83”92”
100”
Near-bit
70”70”78”87”95”
ApproximateWeight
(kgs)160340750
10001800
Overall Length(in)
7
RIG REPLACEABLE SLEEVE TYPE STABILIZERS and MANDRELS
Our sleeve stabilizers are the product of simple design coupled with engineered technology. We understand the need to swiftly change out a sleeve on the rig floor which is why our sleeve and mandrel design is virtually foolproof. Our one-piece mandrel is manufactured from high strength 4145 heat treated alloy with ample tong space for connection recuts.
Easily interchanged with other brands, our sleeve and mandrel design is long-wearing and extremely economical. When they wear out, they can simply be thrown away – a must for remote areas where there is limited access to a field shop and inventory must be kept light.
Due to our hardfacing abilities, our sleeves can be stocked in the same sizes to meet different formation demands while being interchangeable to fit the same mandrel.
• Easily changed out on the rig floor • Sleeve and mandrel design is interchangeable with similar brands • Sleeves can be discarded when worn out
SLEEVE SPECIFICATIONS
MANDREL SPECIFICATIONS
SLEEVE
MANDREL
REAMCOSleeve
Series/Size475625775775963
Hole Sizeor
Blade O.D. Range(in)
6 1/4”– 6 3/4”8 3/8”– 9 7/8”8 7/8”– 12 1/4”
10 5/8”– 17 1/2”12 1/4”– 17 1/2”
SleeveBody
Diameter(in)5 3/4”7 1/2”9 1/4”10”11”
SleeveI.D.(in)4 3/4”6 1/4”7 3/4”7 3/4”9 5/8”
Sleeve Length
(in)14”14”18”18”18”
BladeWidth
(in)2”
2 1/2”3”3”
3 1/2”
MinimumCrownLength
(in)12 1/5”11 1/10”14 3/5”11 1/10”11 9/10”
MaximumSleeveWeight
(lbs)4384
162294253
REAMCOMandrel
Series47627796
MaximumFishing Neck
Diameter(in)
4 3/4”–5”6 1/2”–7”
8 1/4”10”
MandrelUpset
Diameter(in)
5 1/8–5 3/4”7 1/2”9 1/4”11”
SleeveEnd
Diameter(in)
4 3/4”6 1/4”7 3/4”9 5/8”
FishingNeck
Length(in)23”23”27”27”
SleeveEnd
Length(in)32”32”37”37”
TotalOverallLength
(in)62”62”71”71”
NearBit
1 1/2”2 1/4”
2 13/16”2 13/16”
String2 1/4”
2 13/16”2 13/16”2 13/16”
MaximumMandrelWeight
(lbs)302500893
1400
Bore I.D.
MAKE-UP TORQUESeries
Make-upTorque (ft-lbs)
41
2000–2500
47
2000–2500
62
4500–5500
65
5000–6000
77
7000–8000
85
10000–12000
96
10000–12000
8
CUSTOM MOTOR / MWD and RSS SLEEVE STABILIZERS
Using client supplied drawings and specifications, Drilling Tools International is able to manufacture any type of 4145 HT steel sleeve stabilizer or non-magnetic type sleeve.
Utilizing our in-house engineering team and the latest 3D modeling software, we are alsoable to assist with the design process. Coupled with the latest CNC milling equipment we are able to produce any blade configuration or dimensional requirement a client might need.
With a large inventory of steel and non magnetic heavy wall tubing and custom forgings, we are able to deliver custom sleeves with relatively short lead times.
This ability coupled with the application or our latest hardfacing technology assures optimal run time and durability.
9
HARDFACINGTo meet a variety of the most demanding drilling conditions, we offer hardfacings in five different options for our stabilizer blades. We are constantly working to develop improvements on wear characteristics and matrix hardness. Our extensive research has increased reliability in bonding. Each hardmetal is tailored to your specific needs and our expert application ensures exceptional resistance to wear and tear, prolonging the life of your tool.
HF2000 Geothermal hardfacing utilizes tungsten carbide bricks, brazed to the stabilizer blade and surrounded by tungsten impregnated composite rod.
HF3000 A hardfacing method that applies the maximum amount of premium tungsten carbide on any wear surface. It can be applied in varied thickness and uses tungsten carbide inserts to maximize abrasive and impact durability.
HF5000 Most common hardfacing technique that utilizes crushed tungsten in a nickel bronze matrix for soft to medium drilling applications.
HF6000 A premier hardfacing which suspends fine tungsten carbide pellets or crushed material in a hard, ferrous matrix. The matrix attains a hardness of approximately 45 HRC and is completely saturated with carbide. It is typically used with non-magnetic stabilizers due to lower application temperature.
HF6500 This slag-free material features a high density of hard-cast tungsten carbide particles evenly distributed in a nickel allow matrix. It offers exceptional resistance to abrasive and erosive particles with moderate impact and is applicable with all body materials. This matrix attains a hardness of approximately 55 HRC.
HF2000
HF3000
HF5000
HF6000
HF6500
ASTM G65 Abrasion Test
HF2000 Geothermal
HF3000 HF5000 Crushed Carbide
HF6000 HF6500 Cast WC
Abrasion testing completed per ASTM G65 – 16 using the dry sand/rubber wheel test method and quantitative values determined from adjusted weight loss.
10
NON-MAGNETIC DRILL COLLARS
MECHANICAL PROPERTIES
As you drill in areas closer to the earth’s magnetic poles, it is essential to use a non-magnetic drill collar. Our non-mag drill collars offer strength and hardness while neutralizing magnetic interference. Compatible with standard drill string tools and stabilizers, our non-mag drill collars are manufactured to API Spec 7-1. Inventory includes: • Slick • Flex • Spiral • Pony
We treat our non-mag material ID with a shot peening operation to compress the inside diameter which prevents stress corrosion while drilling in H2S environments. • Resistant to stress corrosion in sour gas environments • Compatible with standard drill string tools and stablizers • Spiraling available on request
SPECIFICATIONS
NON-MAGNETICSLICK
DRILL COLLAR
NON-MAGNETICSPIRAL
DRILL COLLAR
Impact TestCHARPY V. notch
J (min.) ft-lbs(min.)
81 60
Drill CollarOD Range
(in)
3 1/2” through 6 7/8”7” through 11”Larger than 7”
Min.Elongation
%
252525
Min.Reduction
%
505050
Min. YieldStrength(at 0.2%)
Min.Tensile
Strength
MPa
760690620
MPa
900830760
PSI
110 000100 00090 000
PSI
130 000120 000110 000
Room Temperature. ASTM A 370
CommonConnections
2 7/8 Reg 3 1/2 Reg
3 1/2 IF NC384 FH NC40
4 1/2 FH 4 1/2 XH NC 464 1/2 IF NC 505 1/2 FH NC 56
6 5/8 Reg 6 5/8 FH
7 5/8 Reg
OD(in)
3 1/2 to 3 7/8” 4 1/8 to 4 1/2”4 3/4 to 5 1/2”
5 to 6”5 1/2 to 6 1/2”5 3/4 to 6 3/4”6 1/4 to 7 1/2”
7 to 7 3/4”7 1/4 to 8”
7 1/2 to 8 1/4” 8 1/2 to 9 1/2”
ID(in)
1 1/4 to 1 3/4”1 1/4 to 2 1/4”
1 3/4 to 2 13/16” 1 3/4 to 2 13/16”
2 to 3”2 1/4 to 3”
2 1/4 to 3 1/4”2 1/4 to 3 1/4”2 1/2 to 3 1/4”2 1/2 to 3 1/4” 2 1/2 to 3 3/4”
ApproximateWeight
(lbs)760–1114989–1490
1350–22501552–27261759–3166 1992–3352 2359–42373182–45523476–47803782–5116 4816–6953
11
STEEL DRILL COLLARS
STANDARD SPECIFICATIONS FOR SLICK OR SPIRAL DRILL COLLARS
RECOMMENDED SLIP AND ELEVATOR RECESS DIAMETERS FOR DRILL COLLARS*low torque face available
MECHANICAL PROPERTIES
We can provide you with the technical assistance necessary to assist you in properly using drill collars in the bottom hole assembly.
• Stress relieved connections • Spiraling on OD (RH standard) • Hardbanding • Slip and elevator recesses • Manufactured to DS-1 specifications
Used to add weight to the bit and stiffness to bottom hole assembly, our drill collars are an invaluable downhole tool.
To keep you drilling in the right direction, run our drill collars in combination with our stabilizers to resist buckling. Manufactured from an AISI 4145H modified heat treated alloy steel, our strict quality assurance guidelines assure metallurgical integrity of each and every bar.
Our drill collar bars are batch or continuous line heat treated and have both cold-worked and phosphate coated connections.
7” OD and Less 7-1/4” OD - 12” OD
ID ID
Depthof Cut
Depthof Cut
OD OD
120° 120°70°
SLICKDRILL COLLAR
SPIRALDRILL COLLAR
O.D.(in)3 1/2”4 1/8”4 3/4”
5”6”6”
6 1/4”6 1/4”6 1/2”6 1/2”6 3/4”
7”7”
7 1/4”8”
8 1/4”9 1/2” *9 3/4” *11” *
I.D.(in)1 1/2”
2”2 1/4”2 1/4”2 1/4”
2 13/16”2 1/4”
2 13/16”2 1/4”
2 13/16”2 1/4”2 1/4”
2 13/16”2 13/16”2 13/16”2 13/16”
3”3”3”
Weightin Air(lbs)
826.81076.21447.01648.52558.02322.32811.22575.63074.82839.13348.73632.93397.23691.84637.54973.46718.07116.09260.6
UnitWeight(lbs/ft)
26.734.746.753.282.574.990.783.199.291.6
108.0117.2109.6119.1149.6160.4216.7229.5298.7
StandardEnd
ConnectionsNC-26 thru 35NC-31 thru 41NC-38 thru 47NC-38 thru 50NC-44 thru 60NC-44 thru 60NC-44 thru 62NC-46 thru 65NC-46 thru 65NC-46 thru 65NC-46 thru 67NC-50 thru 70NC-50 thru 70NC-50 thru 72
6 5/8 Reg6 5/8 Reg7 5/8 Reg7 5/8 Reg8 5/8 Reg
CollarO.D.(in)4 1/8”4 3/4”
5”6”
6 1/4”6 1/2”6 3/4”
7”7 1/4”
8”8 1/4”9 1/2”9 3/4”11”
ElevatorRecess Dia
(in)3 11/16”4 1/4”4 1/2”5 3/8”5 5/8”5 7/8”
6”6 1/4”6 1/2”7 1/4”7 1/2”8 5/8”8 7/8”
10 1/8”
SlipRecess Dia
(in)3 3/4”4 3/8”4 5/8”5 1/2”5 3/4”
6”6 1/4”6 1/2”6 3/4”7 1/2”7 3/4”
9”9 1/4”
10 1/2”
ElevatorRecess Radius
(in) 1/8” 1/8” 1/8” 1/8” 1/8” 1/8”
3/16” 3/16” 3/16” 3/16” 3/16” 1/4” 1/4” 1/4”
Top ElevatorBore(in)
3 13/16”4 3/8”4 5/8”5 1/2”5 3/4”
6”6 3/16”6 7/16”6 11/16”7 7/16”7 11/16”8 7/8”9 1/8”
10 3/8”
Lower Half Elevator Bore
(in)4 1/4”4 7/8”5 1/8”6 1/8”6 3/8”6 5/8”6 7/8”7 1/8”7 3/8”8 1/8”8 3/8”9 5/8”9 7/8”
11 1/8”
Ultimate tensile strength (UTS)
Yield Strength (YS)
Elongation (L = 4 D)Reduction of areaImpact strength
(ASTM A 370 Charpy - V)Hardness (Brinell)
(one inch below surface)
135,000 to 140,000938 to 973
100,000 to 110,000695 to 764
13 min45 min52 min
285 to 341
PSIMpaPSI
Mpa%%J
BHN
(4145 H Modified)
12
ROLLER REAMERSWe manufacture, sell, and rent roller reamers in three-point and six-point configurations. Another versatile downhole drilling component, roller reamers complement our broad range of downhole stabilization products. They can be used in straight and directional drilling applications when a side wall cutting action is necessary and/or for point stabilization near the bit or further up in the drill string.
Our roller reamers make the difference downhole when used to maintain hole gauge, wipe out key seats, and smooth out rough and troublesome ledges which will cause the drill stem to stick and bind. Our roller reamers also help to reduce drill stem torque in highly deviated (horizontal) boreholes and can greatly assist the operator in maintaining drill stem stability.
You have the flexibility to use the style that suits your drilling needs best and provides you with the maximum reaming and side wall cutting action. Combining three or six point stabilization with reaming keeps the hole to size, the bit on track, and ensures smoother drilling operations.
• Available in soft, medium, hard, and smooth • Available in three-point and six-point configurations • Cutters can easily be replaced on rig floor
Heat treated and machined with precise dimensional control, our roller reamer parts are inspected in the pre- and post- manufacturing process phases and checked again for conformance to interchangeability needs and requirements.
SEALED BEARING ROLLER REAMER
The improved reliability of a sealed bearing cutter and compression fit blocks has helped mitigate the effects of side load impacts and effectively withstands the high rates of rotation placed on the reamer during drilling. Adding the seals to the cutter has allowed us to meet customers performance expectations and provide a value competitive product in the high-performance reamer market.
SIX-POINT REAMER
THREE-POINT REAMER
SOFTlimestonesand shales
MEDIUMdolomites,hard limes,
cherts
HARDvery hard sands,
granites, and other abrasive
materials
ROLLERS
13
ROLLER REAMERS ORDERING INFORMATION:To order spare parts or to request quotes on complete reamer assemblies, please specify: • Three- or six-point style • String or nearbit application • Roller cutter type • Connections top and bottom • Preferred fishing neck diameter and length • Hole size • Reamer inside diameter • Bore for float
Bearing Pin
Cutter Upper Block
Lower Block
Cross Pin
Secondary Lock Bolt
Three-pointString Roller Reamer Body
SPECIFICATIONS
Roller
ReamerSeriesR3750R4250R4250R5000R5000R5500R5500R5500R5501R5501R5501R7001R7001R7751R7751R7751R7751R8750R8750R8750R9500R9500
R10500R10500R11750R12750R12750R15000R16375R16375R2200R2200
HoleSize(in)4 1/8”4 5/8”4 3/4”5 5/8”5 7/8”
6”6 1/8”6 1/4”6 1/2”6 5/8”6 3/4”7 5/8”7 7/8”8 3/8”8 1/2”8 5/8”8 3/4”9 1/2”9 5/8”9 7/8”
10 5/8”11”12”
12 1/4”13 3/4”14 3/4”
15”17 1/2”18 1/2”
20”24”26”
UpsetDiameter
(in)3.75”4.25”4.25”5.00”5.00”5.50”5.50”5.50”5.50”5.50”5.50”7.00”7.00”7.75”7.75”7.75”7.75”8.75”8.75”8.75”9.50”9.50”
10.50”10.50”11.75”12.75”12.75”15.00”16.38”16.38”22.00”22.00”
MaximumFishing Neck
Diameter(in)3 1/2”
4”4”
4 1/2”4 1/2”
5”5”5”5”5”5”
6 1/4”6 1/2”6 3/4”6 3/4”6 3/4”6 3/4”
8”8”8”8”8”
10”10”10”10”10”11”11”11”11”11”
MaximumInside
Diameter(in)
1.000”1.000”1.000”1.000”1.000”1.250”1.250”1.250”1.875”1.875”1.875”2.250”2.250”2.250”2.250”2.250”2.250”2.250”2.250”2.250”2.250”2.250”2.812”2.812”2.812”2.812”2.812”3.000”3.000”3.000”3.000”3.000”
Cutter Size(in)1 3/8”1 1/2”1 1/2”
2”2”2”2”2”2”2”2”
2 1/4”2 1/4”2 5/8”2 5/8”2 3/4”2 3/4”3 1/8”3 1/8”3 1/8”3 1/4”3 1/4”
4”4”4”
5 1/2”5 1/2”5 1/2”5 1/2”5 1/2”
7”7”
BlockSize3/4A7/8A7/8B
1A1C1A1B1C1C1D1E
1 1/8A1 1/8C1 3/8A1 3/8B1 3/8B1 3/8C1 3/4A1 3/4B1 3/4D1 3/4A1 3/4D2 1/4C2 1/4E2 1/4E2 1/2A2 1/2C2 1/2E2 1/2A2 1/2M
3A3C
SecondaryLocking BoltOD x Length
N/AN/AN/AN/AN/A
1/2” x 1/2”1/2” x 1/2”1/2” x 1/2”
N/AN/AN/A
1/2” x 1/2”1/2” x 1/2”1/2” x 1/2”1/2” x 1/2”1/2” x 1/2”1/2” x 1/2”1/2” x 3/4”1/2” x 3/4”1/2” x 3/4”1/2” x 3/4”1/2” x 3/4”3/4” x 3/4”3/4” x 3/4”3/4” x 3/4”1” x 1”1” x 1”1” x 1”1” x 1”1” x 1”
1” x 2 1/2”1” x 2 1/2”
Cross PinSize
OD x Length1/4” x 1 3/4”1/4” x 1 3/4”1/4” x 1 3/4”6/16” x 2”5/16” x 2”5/16” x 2”5/16” x 2”5/16” x 2”5/16” x 2”5/16” x 2”5/16” x 2”
1/2” x 2 1/2”1/2” x 2 1/2”1/2” x 2 1/2”1/2” x 2 1/2”1/2” x 2 1/2”1/2” x 2 1/2”
1/2” x 3”1/2” x 3”1/2” x 3”1/2” x 3”1/2” x 3”
1/2” x 3 3/4”1/2” x 3 3/4”1/2” x 3 3/4”7/8” x 4 3/4”7/8” x 4 3/4”7/8” x 4 3/4”7/8” x 4 3/4”7/8” x 4 3/4”7/8” x 4 3/4”7/8” x 4 3/4”
3PT(lbs)150300300350350425425425425425425750750950950950950
125012501250130013002000200022002400240028003300330050005000
3PT(lbs)484848797979797979797979798282828284848484848989899393939393
100100
6PT(lbs)200400400600600700700700700700700
1200120015001500150015002000200020002200220033003300370044004400550065006500N/AN/A
6PT(lbs)747474
114114114114114114114114114114124124124124129129129129129140140140148148148148148N/AN/A
Bearing PinSize(in)3/4”7/8”7/8”1”1”1”1”1”1”1”1”
1 1/8”1 1/8”1 3/8”1 3/8”1 3/8”1 3/8”1 3/4”1 3/4”1 3/4”1 3/4”1 3/4”2 1/4”2 1/4”2 1/4”2 1/2”2 1/2”2 1/2”2 1/2”2 1/2”
3”3”
Assembly WeightOverall Length
14
HOLE OPENERS
Devil Drill Features • Machined out of AISI 4140HT/4145HT • Blade structures may be integral spiral, integral straight, or welded straight • Blades are dressed with tungsten carbide chips to allow for backreaming • Slick blade OD helps reduce vibrations and ensures full gauge hole • Three-field changeable jets allow for effective blade and hole cleaning • May be box down, integral bull nose, or fitted with the spherical pilot bit • Note: May be dressed with PDC
Bladed Hole OpenerDevil Drill
SPECIFICATIONS: DEVIL DRILL HOLE OPENER
All measurements are in inches unless otherwise noted
Bladed Hole Opener – Devil Drill The bladed hole opener is used for wellbore enlargement where roller cones are not necessary or applicable. Integral body construction provides extra strength. Blades are dressed with tungsten carbide chips and inserts for gauge protection. For use in reaming soft to hard formations. Hole sizes from 3-1/2” through 30”.
IB PDC Devil-DrillEnables the operator to use a rotating steerable directional system while simultaneously opening the hole.
3 1/2”– 4 1/4”
4 3/8”– 4 3/4”
5 7/8”– 6 7/8”
7 1/2”– 8 3/4”
9 5/8”– 10 5/8”
12 1/4”–13 1/2”
14 1/2”–14 3/4”
17 1/4”– 17 3/4”
18 1/2”– 26”
3”
3 3/4”
3 7/8”
4 3/4”
6 3/4”
8 1/8”
8 1/8”
9 7/8”
11 1/2”
2 3/8” Reg
2 7/8” Reg
3 1/2” Reg
4 1/2” Reg
6 5/8” Reg
6 5/8” Reg
6 5/8” Reg
6 5/8” / 7 5/8” Reg
7 5/8” Reg
2 3/8” Reg/Bull Nose
2 7/8” Reg/Bull Nose
3 1/2” Reg/Bull Nose
4 1/2” Reg/Bull Nose
6 5/8” Reg/Bull Nose
6 5/8” Reg/Bull Nose
6 5/8” Reg/Bull Nose
6 5/8” / 7 5/8” Reg/Bull Nose
7 5/8” Reg/Bull Nose
24”– 42”
24”– 42”
36”– 42”
36”– 48”
42”– 60”
42”– 60”
42”– 60”
42”– 60”
42”– 60”
SizeRange
Pilot HoleSize
Standard TopConnection (Pin)
Standard BottomConnection (Box)
Standard Bull NoseLength
15
SPECIFICATIONS: DEVIL DRILL HOLE OPENER
HOLE OPENERS
Security Features • Quick change cutter assembly to allow fast, easy changes on rig floor using hand tools • High velocity jet circulation for efficient hole cleaning and longer cutter life • “Nail-Lock” retained nozzles can be changed quickly and easily for matching particular pump capacities or hydraulics programs • One piece body eliminates unnecessary threaded connections • Cutters can be changed quickly and easily • Cutter Types: - Type S: Tooth type for soft formations - Type MG: Tooth type for medium to hard formations. Carbide inserts for gauge protection, sealed bearing - Type S6: Insert type for soft to medium formations, sealed bearing - Type H8: Insert type for hard formations, sealed bearing - Type H10: Insert type for extremely hard, abrasive formations, sealed bearing
The security custom hole openers are designed to handle big-hole drilling projects, offshore well conductor holes and other drilling needs where speed and reliability are important.
Security Type Hole Opener
Security CustomHole Opener
SECURITY CUSTOM HOLE OPENER SPECS
Sizes are most common, however security custom hole openers are available any size up to 42” with different saddle quantities and arrangements for varying pilot hole sizes.
PopularHoleSizes(in)
26”
36”
42”
RecommendedPilotHole(in)
14 3/4” – 17 1/2”
17 1/2” – 26”
26” – 36”
Numberof
Cutter Saddles
3
4
4
StandardBottom
Connection(Box)
7 5/8” Reg
7 5/8” Reg
7 5/8” Reg
StandardTop
Connection(Pin)
7 5/8” Reg
7 5/8” Reg
7 5/8” Reg
16
PUP JOINTS
ROTARY SUBS
Key components in special drilling operations, our pup joints are manufactured from AISI 4145H alloy steel to meet API specifications. Our pup joints can be ordered with an 18-degree taper or square shoulder and with pressed or cast steel thread protectors.
Drilling Tools International offers cross-over subs, top driver saver subs, and bit subs for any drill string connection size and function need. Manufactured from alloy heat treated steel, our subs meet API specifications.
Used to go from one diameter to another.
Crossover subs adapt to different size drill pipe connections to drill collars, or drill collars to drill collars.
REDUCED SECTION SUB
TOP DRIVE SAVER SUBS
CROSSOVERSUB
Used to protect wear on the top drive system, these subs are manufactured to client specifications in any configuration from 4145 HT steel.
INTEGRAL SIDE-ENTRY SUBS
All single side-entry subs are integral one-piece designtested to 1 1/2 times safe working pressure.
INTEGRAL SINGLESIDE-ENTRY SUBS
All double side-entry subs are integral, one-piece design tested to 1 1/2 times safe working pressure.Designed with a solid ID on one end made to pump thru or pressure test
INTEGRAL DOUBLESIDE-ENTRY SUBS
SINGLESIDE-ENTRY
SUB
DOUBLESIDE-ENTRY
SUB
PUP JOINT
PUP JOINT SPECIFICATIONS
OD(in)
4 3/4”6 1/2”6 3/4”
7”– 7 1/4”8”– 8 1/4”
8 1/2”
IDAs requiredAs requiredAs requiredAs requiredAs requiredAs required
Connection Size
As requiredAs requiredAs requiredAs requiredAs requiredAs required
OverallLength
42”42”42”42”42”42”
OD(in)
4 3/4”6 1/2”6 3/4”
7”– 7 1/4”8”– 8 1/4”
8 1/2”
IDAs requiredAs requiredAs requiredAs requiredAs requiredAs required
Connection Size
As requiredAs requiredAs requiredAs requiredAs requiredAs required
OverallLength
54”54”54”54”54”54”
Nominal Drill Pipe Size (in)
3 1/2”
4”
4”
4 1/2”
4 1/2”
4 1/2”
5”
5”
6 5/8”
StandardEnd
ConnectionsNC-38NC38NC-40NC-40NC-40NC-40NC-46NC-46NC-46NC-46NC-46NC-46NC-46NC-46NC-50NC-50NC-50NC-50
6 5/8”FH6 5/8”FH
ToolJoint
Dia (in)4 3/4”
5”5 1/4”5 1/2”5 3/4”
6”6”
6 1/4”6 1/8”6 1/4”6 3/8”6 1/8”6 1/4”6 3/8”6 3/8”6 1/2”6 3/8”6 1/2”8 1/4”8 1/2”
PipeI.D.(in)2 3/8”
2 11/16”2 13/16”2 13/16”3 1/4”3 1/4”3 1/2”3 1/4”3 1/2”3 1/2”3 1/2”3 3/4”3 3/4”3 3/4”3 1/2”3 1/2”3 3/4”3 3/4”4 3/4”4 1/4”
Nominal WallThickness
(in)9/16”13/32”17/32”17/32”3/8”3/8”5/8”5/8”1/2”1/2”1/2”3/8”3/8”3/8”3/4”3/4”5/8”5/8”
15/16”1 3/16”
Box9 1/2”9 1/2”10”10”10”10”10”10”10”10”10”10”10”10”10”10”10”10”10”10”
Pin7”7”7”7”7”7”7”7”7”7”7”7”7”7”7”7”7”7”7”7”
Elevator Upset
Dia (in)3 7/8”3 7/8”4 3/16”4 3/16”4 1/2”4 1/2”
4 11/16”4 11/16”
5”5”5”5”5”5”
5 1/8”5 1/8”5 1/8”5 1/8”6 3/4”6 3/4”
ApproximateUnit Weight
(lbs/ft)331937244128503248283043232658335328
25.2027.70
Tong SpaceLength (in)
17
CIRCULATING SUBS
Circulating subs are made with a pin or box connection and includes a WECO figure 1502 union. All circulating/pump-in subs are integral, one-piece design.
INTEGRAL CIRCULATING SUBSOR PUMP-IN SUBS
LIFT SUBSDrilling Tools International lift subs are manufactured from heat treated AISI 4145H alloy steel. Upon request, connection threads can be kemplated to prevent galling during make-up.
For handling ease while tripping, lift subs are screwed into the drill collar and used to lift the collars from the hole. The sub’s elevator recess and connections are machined to fit the elevator and drill collar connections.
LIFT SUB DIMENSIONS
LIFT SUB
LIFT BAIL DIMENSIONS
BOX LIFT BAIL
PIN LIFT BAIL
LIFT CAP BOX CONNECTION
LIFT CAP PIN CONNECTION
THREAD PROTECTORS
LIFT CAPS
INTEGRAL CIRCULATING SUBS, LIFT SUBS, STEEL THREAD PROTECTORS/LIFT BAILS, and LIFT CAPS
OD(in)
4 3/4”6 1/2”6 3/4”
7”– 7 1/4”8”– 8 1/4”
8 1/2”
ID2”2”2”2”2”2”
Connection Size
As requiredAs requiredAs requiredAs requiredAs requiredAs required
OverallLength
18”18”18”18”18”18”
DrillCollar
Size (in)3 1/2”4 1/8”4 3/4”
5”6”
6 1/4”6 1/2”6 3/4”
7”7 1/4”
8”8 1/4”9 1/2”9 3/4”11”
ApproxWeight
(lbs)40508488
150168168168169167257257320320368
ConnectionSize and Type
NC 232 3/8 Reg
NC 262 3/8 IF2 7/8 IF2 7/8 XHNC 31
3 1/2 RegNC 35
3 1/2 XHNC 383 1/2 IF
3 1/2 H-90NC 404-FH
4 H-904 1/2 Reg
NC 444 1/2 FH
4 IFNC 46
4 1/2 H-905 H-90
5 1/2 Reg5 1/2 H-90
NC 504 1/2 IF5 1/2 FH
6 5/8 Reg6 5/8 H-90
NC 567 H-90NC 61
7 5/8 Reg7 5/8 H-90
NC 708 5/8 Reg
8 5/8 H-90
Max. DrillCollar Size (in)
3 1/2”
4 3/8”
5 1/8”
5 3/4”
6 1/4”
6 3/4”
7 1/2”
8 1/4”
9”
10”
11”
Pin ProtectorWeight (lbs)
66669999
121212121515152121212120202023232323233333333332326666667777
Box ProtectorWeight (lbs)
66669999
121212121515152121212120202023232323233333333332326666667777
drillingtools.com
North America Land Operations 20104 E Hardy RdHouston, TX 77073281.645.2010
Offshore/International & Manufacturing1149 Smede HwyBroussard, LA 70518337.856.0333
Product Sales337.364.9244
Midland, TX • 432.563.0676
Odessa, TX • 432.248.8350
New Iberia, LA • 337.256.5848
Oklahoma City, OK • 405.604.2763
Bakersfield, CA • 661.869.1752
Casper, WY • 307.237.5248
Charleroi, PA • 724.565.5682
Watford City, ND • 701.482.6500
Nisku, Canada • 877.570.1962
Newfoundland, Canada • 709.782.0087
Dubai, UAE • +9714 813 8000
Corporate3701 Briarpark Dr • Ste 150Houston, TX 77042832.742.8500
What, Where, and When You Need Us
Drilling Tools International, Inc. is a leading provider of downhole tools to the land and offshore drilling markets. For more than 30 years our company has been guided by the principals of Strength, Innovation and Performance. We consistently deliver world class customer service while providing quality products that meet the demanding drilling applications of today’s market.
Our Quality Management System is certified in compliance to ISO 9001, and API Spec Q1 and our manufacturing is licensed to API Spec 7-1. Our Quality Management System governs all of our processes from planning, to process control, to delivery. This ensures that we consistently manufacture products that not only meet API standards but also meet the ever-changing needs of our customers.
©2018 Drilling Tools International, Inc. All rights reserved. v10-2018
Top Related