Door compliance with AS1428
225 SERIES HINGED/PIVOT DOORS ■ 1
Capral 225 Series Hinged/Pivot DoorDoor Thresholds
100
15EP13539100mm x 15mm RAMPED THRESHOLD
P.P.
150
15
EP13540150mm x 15mm RAMPED THRESHOLD
P.P.
Ramped thresholds are typically used with hinge and pivot doors. These thresholds provide a compliant (less than 1:8 gradient) transition from outside to inside.
Opening WidthA clear opening width of 850mm is required.
Hinged Doors
Suite Door Min Opening
400 series 225 1020mm
425 series 225 1031mm
419 SG series 225 1034mm
419 DG series 225 1044mm
440TB series 46D 1054mm
419TB series 46D 1054mm
100mm Ramped Threshold: 150mm similar No Threshold
DOOR
REB
ATE
HEIG
HT (D
RH)
16
DG RAILEP14899
GLAZINGWEDGE
F/D WEATHERSTRIPEPD0284
WEATHERSTRIP CLIP308233
POLYPILE 11mm301865
100mm x 15mmRAMPEDTHRESHOLDEP13539
DOOR
REB
ATE
HEIG
HT (D
RH)
8
850mm
Min. Opening
Hardware - Door Controls ■ Door handle to be 1000mm +/- 100mm from fl oor level■ Door handle to allow door to be unlocked and opened with one hand■ Clearance between the handle and back plate or door face to be between 35 to 45mm■ Min 22mm return on handle required to ensure the person who cannot grip the handle will
not slip during the operation of the latch
Maximum force required to operate a door when a door closer is fi tted■ Initially open the door = 20N■ Swing or slide the door = 20N■ Hold the door open = 20N
SUITABLE HANDLES
SELECTOR - HINGED LOCK SET OR
319492 - CYL & KNOB319491 - SINGLE CYL319480 - DOUBLE CYL30mm BACK SET LOCK KITINCLUDES HANDLE, CYLINDER & STRIKEEACH(M5782-KIT04/05/01)
WIDE STILES ONLY
315947 - CYL & KNOB315948 - SINGLE CYL315946 - DOUBLE CYL23mm BACK SET LOCK KITINCLUDES HANDLE,CYLINDER & STRIKEEACH(3782-KIT04/05/01)
NOT COMPATIBLE WITH MEETING STILES
GIDGEE HANDLE WITH OPTIMUM LOCK KIT
315524 - BLACK315525 - SATIN CHROMEPALLADIUM HANDLE KITGIDGEE #37DOUBLE CYLINDEREACH(SPD03260)
PURCHASE TO ORDER315527 - WHITE315526 - SILVER
2 ■ 225 SERIES HINGED/PIVOT DOORS
min.
22mm
35 to
45mm
Luminance ContrastAll doorways shall have a luminance contrast of 30% provided between ■ Door leaf and door jamb■ Door leaf and adjacent wall■ Architrave and wall■ Door leaf and architrave: or■ Door jamb and adjacent wall■ Visual Indicators on glazing.
Finish suppliers now list the Light Refl ective Value LRV on the colour cards. Please refer to suppliers’ websites for a full listing.
Colour Name Technology Code Finish Colour Group LRVAlmond Ivory D1000 GD016A Gloss Living Series 54%
Anodic Bronze D1000 GY114A Satin Anodic 12%
Anodic Champagne D1000 GY276A Matt Anodic 42%
Anodic Clear D1000 GY221A Matt Anodic 55%
Anodic Dark Grey D1000 GL213A Matt Anodic 7%
Anodic Natural D1000 GY235A Matt Anodic 42%
Anodic Off White D1000 GD227A Matt Anodic 74%
Common Colours LRVClear Anodised 70%
Light Bronze Anodised (Portland Stone) 27%
Black Anodised (Ebony) 5%
Pearl White Powder coat 89%
Black Satin Powder coat 4%
If the door panel was clear anodised (LRV 70%), then you would need a door jamb with an LRV 53% or less. i.e. 30% contrast.
Visual Indicators on GlazingWhere there is no chair rail, handrail or transom, all frameless or fully glazed doors, sidelights, including any glazing being mistaken for a doorway or opening;
■ Shall be clearly marked for the full width with a solid and non-transparent contrasting line■ Shall be no less than 75mm wide and extend across the full width of the glazing panel■ Lower edge of the contrasting line shall be between 900 and 1000mm above the fl oor; and■ Shall provide a minimum luminance contrast of 30%.
For buildings where AS1428.1 is not required to be met such as houses, then the manifestation requirements of AS1288 should be applied.
OTHERElectronic closer. Electronic door closers are also an option for hinged doors, details on these options are available from hardware suppliers.
225 SERIES HINGED/PIVOT DOORS ■ 3
4 ■ 225 SERIES SLIDING DOORS
Thresholds - top track systemThe following threshold options are compliant
■ No threshold■ 1021 recessed track■ 1030 slider guide■ 1031 slider guide■ 1061 slider guide
Sliding 1021 recessed trackNo Threshold
DOOR
REB
ATE
HEIG
HT (D
RH)
8
SECURITY ANGLE(25 x 40 x 3mm - OPTIONAL)
10
1021 FLOOR ROLLER300375
1021 RECESSEDSLIDER TRACKEK8593
100mm LONG FLAT BARFIXED @ 600 CTRS TO KEY
EXTENDED RAILS SHOWN AS EXAMPLEEPOXY NONSHRINK GROUT
1030 Slider Guide
1030 SLIDER GUIDEEK7621100mm AT JAMB/MULLION
10.5
1031 Slider Guide
SLIDER GUIDEE18687100mm AT JAMB/MULLION
10.5
1061 Slider Guide
SLIDER GUIDEE18687100mm AT JAMB/MULLION
10.5
225 SERIES SLIDING DOORS ■ 5
Capral 225 Series Sliding Door
Thresholds - auto closerNo threshold below the auto sliding door is compliant.
Sliding single automatic sill Sliding double automatic sill
10mm
SILL FIXED WITH APPROPRIATEFIXINGS AT 600 CTRS
15
SILL FIXED WITH APPROPRIATEFIXINGS AT 600 CTRS
10mm
6 ■ 225 SERIES SLIDING DOORS
Standard stile or wide stile
Wide stile only
Opening WidthA clear opening width of 850mm is required with a 60mm clearance between the handle and the jamb when opened.
Sliding Doors - Aria D Handle
Suite Door Min Opening
300 series 225 1065mm
400 series 225 1083mm
425 series 225 1095mm
419 SG series 225 1095mm
419 DG series 225 1105mm
Sliding Doors - Caprico D Handle
Suite Door Min Opening
300 series 225 1090mm
400 series 225 1108mm
425 series 225 1120mm
419 SG series 225 1120mm
419 DG series 225 1130mm
225 SERIES SLIDING DOORS ■ 7
850mm
60mm
Min. Opening
850mm
60mm
Min. Opening
8
Hardware - Door Controls ■ Door handle to be 1000mm +/- 100mm from fl oor level■ Door handle to allow door to be unlocked and opened with one hand■ Clearance between the handle and back plate or door face to be between 35 to 45mm■ D type handles shall be provided on sliding doors
Maximum force required to operate a door when a door closer is fi tted■ Initially open the door = 20N■ Swing or slide the door = 20N■ Hold the door open = 20N
SUITABLE HANDLES
OPTIMUM MORTICE LOCK & ARIA HANDLE KIT
OR
316491EACH(SPD03927)
3115163541 LEVER HANDLEEACH(HL406)
3144693541 TURN KNOBEACH(SPD02887)
317691CAPRIO FLUSH PULLHANDLEEACH(MCA15002SS)
SLIDINGOPTIMUM & 3541 LOCKS
8 ■ 225 SERIES SLIDING DOORS
Luminance ContrastAll doorways shall have a luminance contrast of 30% provided between ■ Door leaf and door jamb■ Door leaf and adjacent wall■ Architrave and wall■ Door leaf and architrave: or■ Door jamb and adjacent wall■ Visual Indicators on glazing.
Finish suppliers now list the Light Refl ective Value LRV on the colour cards. Please refer to suppliers’ websites for a full listing.
Colour Name Technology Code Finish Colour Group LRVAlmond Ivory D1000 GD016A Gloss Living Series 54%
Anodic Bronze D1000 GY114A Satin Anodic 12%
Anodic Champagne D1000 GY276A Matt Anodic 42%
Anodic Clear D1000 GY221A Matt Anodic 55%
Anodic Dark Grey D1000 GL213A Matt Anodic 7%
Anodic Natural D1000 GY235A Matt Anodic 42%
Anodic Off White D1000 GD227A Matt Anodic 74%
Common Colours LRVClear Anodised 70%
Light Bronze Anodised (Portland Stone) 27%
Black Anodised (Ebony) 5%
Pearl White Powder coat 89%
Black Satin Powder coat 4%
If the door panel was clear anodised (LRV 70%), then you would need a door jamb with an LRV 53% or less. i.e. 30% contrast.
Visual Indicators on GlazingWhere there is no chair rail, handrail or transom, all frameless or fully glazed doors, sidelights, including any glazing being mistaken for a doorway or opening;
■ Shall be clearly marked for the full width with a solid and non-transparent contrasting line■ Shall be no less than 75mm wide and extend across the full width of the glazing panel■ Lower edge of the contrasting line shall be between 900 and 1000mm above the fl oor; and■ Shall provide a minimum luminance contrast of 30%.
For buildings where AS1428.1 is not required to be met such as houses, then the manifestation requirements of AS1288 should be applied.
OTHERElectronic closer. Electronic door closers are also an option for hinged doors, details on these options are available from hardware suppliers.
225 SERIES SLIDING DOORS ■ 9
10 ■ 900 SERIES SLIDING DOORS
OUTSIDE
100mm low profi le sill (external slider shown)
150mm low profi le sill (internal slider shown)
OUTSIDE
900 SERIES SLIDING DOORS ■ 11
Thresholds
Capral 900 Series Sliding Door
The following threshold options are compliant.
Threshold - Sill Applications
100mm x 44mm Sill Application
150mm x 44mm Sill Application
12 ■ 900 SERIES SLIDING DOORS
EPD0209
308064
EPD0212
Ø56 (DN50)
EPD0220
308064
EPD0212
Ø56 (DN50)
900 SERIES SLIDING DOORS ■ 13
Opening WidthA clear opening width of 850mm is required with a 60mm clearance between the handle and the jamb when opened.
Framing Suite
400 series 425 series 419SG series 419DG series
Lock Width mm
DS930 2260 2270 2270 2280
ONYX 2230 2240 2240 2250
OPTIMUM 2180 2190 2190 2200
ALBANY 2210 2220 2220 2230
Framing Suite
400 series 425 series 419SG series 419DG series
Handle Width mm
Caprio D 2210 2210 2210 2200
Wide Stile must be used when Caprio D handles are selected
60mm850mm
6mm
6mm
6mm
6mm
Min. Opening
60mm850mm
Min. Opening
6mm 6mm
6mm 6mm
Hardware - Door Controls ■ Door handle to be 1000mm +/- 100mm from fl oor level■ Door handle to allow door to be unlocked and opened with one hand■ Clearance between the handle and back plate or door face to be between 35 to 45mm■ D type handles shall be provided on sliding doors
Maximum force required to operate a door when a door closer is fi tted■ Initially open the door = 20N■ Swing or slide the door = 20N■ Hold the door open = 20N
SUITABLE HARDWARE
317081 DS930 LOCK KIT10 PACK(MDS930CAP584BLACK)
- BLACK
314862 - BLACK314873 - WHITE314872 - SILVER314874 - SATIN CHROMEONYX LOCK D INNER &SLIM OUTER HANDLE+ UNIVERSAL STRIKEEACH(SPD03155)
316491OPTIMUM MORTICELOCK KITEACH - NO CYLINDERSTRIKE INCLUDED(SPD03927)
306963 - BLACKALBANY MORTICE LOCKEACH(SPD00802)
317693CAPRIO 800mm PULL HANDLEEACH(MCA16000SS)
USE WITH 3541 MORTICE OROPTIMUM LOCK 319582
14 ■ 900 SERIES SLIDING DOORS
Luminance ContrastAll doorways shall have a luminance contrast of 30% provided between ■ Door leaf and door jamb■ Door leaf and adjacent wall■ Architrave and wall■ Door leaf and architrave: or■ Door jamb and adjacent wall■ Visual Indicators on glazing.
Finish suppliers now list the Light Refl ective Value LRV on the colour cards. Please refer to suppliers’ websites for a full listing.
Colour Name Technology Code Finish Colour Group LRVAlmond Ivory D1000 GD016A Gloss Living Series 54%
Anodic Bronze D1000 GY114A Satin Anodic 12%
Anodic Champagne D1000 GY276A Matt Anodic 42%
Anodic Clear D1000 GY221A Matt Anodic 55%
Anodic Dark Grey D1000 GL213A Matt Anodic 7%
Anodic Natural D1000 GY235A Matt Anodic 42%
Anodic Off White D1000 GD227A Matt Anodic 74%
Common Colours LRVClear Anodised 70%
Light Bronze Anodised (Portland Stone) 27%
Black Anodised (Ebony) 5%
Pearl White Powder coat 89%
Black Satin Powder coat 4%
If the door panel was clear anodised (LRV 70%), then you would need a door jamb with an LRV 53% or less. i.e. 30% contrast.
Visual Indicators on GlazingWhere there is no chair rail, handrail or transom, all frameless or fully glazed doors, sidelights, including any glazing being mistaken for a doorway or opening;
■ Shall be clearly marked for the full width with a solid and non-transparent contrasting line■ Shall be no less than 75mm wide and extend across the full width of the glazing panel■ Lower edge of the contrasting line shall be between 900 and 1000mm above the fl oor; and■ Shall provide a minimum luminance contrast of 30%.
For buildings where AS1428.1 is not required to be met such as houses, then the manifestation requirements of AS1288 should be applied.
OTHERElectronic closer. Electronic door closers are also an option for hinged doors, details on these options are available from hardware suppliers.
900 SERIES SLIDING DOORS ■ 15
1616 ■ URBAN SERIES SLIDING DOORS
URBAN SERIES SLIDING DOORS ■ 17
Thresholds
Capral Urban Series Sliding Door
The following threshold options are compliant.
OUTSIDE
18 ■ URBAN SERIES SLIDING DOORS
Opening WidthA clear opening width of 850mm is required with a 60mm clearance between the handle and the interlocking stile when opened.
Jamb
Standard Commercial
Lock Opening Width mm
DS930 2010 2026
ONYX 2010 2026
MORTICE 2015 2030
900 SERIES SLIDING DOORS ■ 19
Hardware - Door Controls ■ Door handle to be 1000mm +/- 100mm from fl oor level■ Door handle to allow door to be unlocked and opened with one hand■ Clearance between the handle and back plate or door face to be between 35 to 45mm■ D type handles shall be provided on sliding doors
Maximum force required to operate a door when a door closer is fi tted■ Initially open the door = 20N■ Swing or slide the door = 20N■ Hold the door open = 20N
SUITABLE HARDWARE
317081 DS930 LOCK KIT10 PACK(MDS930CAP584BLACK)
- BLACK
314862 - BLACK314873 - WHITE314872 - SILVER314874 - SATIN CHROMEONYX LOCK D INNER &SLIM OUTER HANDLE+ UNIVERSAL STRIKEEACH(SPD03155)
- LH BLACK - RH BLACK (SHOWN)
LEICHHARDT MORTICE LOCK - D HANDLE + STRIKEEACH(SPD03731)
Luminance ContrastAll doorways shall have a luminance contrast of 30% provided between ■ Door leaf and door jamb■ Door leaf and adjacent wall■ Architrave and wall■ Door leaf and architrave: or■ Door jamb and adjacent wall■ Visual Indicators on glazing.
Finish suppliers now list the Light Refl ective Value LRV on the colour cards. Please refer to suppliers’ websites for a full listing.
Colour Name Technology Code Finish Colour Group LRVAlmond Ivory D1000 GD016A Gloss Living Series 54%
Anodic Bronze D1000 GY114A Satin Anodic 12%
Anodic Champagne D1000 GY276A Matt Anodic 42%
Anodic Clear D1000 GY221A Matt Anodic 55%
Anodic Dark Grey D1000 GL213A Matt Anodic 7%
Anodic Natural D1000 GY235A Matt Anodic 42%
Anodic Off White D1000 GD227A Matt Anodic 74%
Common Colours LRVClear Anodised 70%
Light Bronze Anodised (Portland Stone) 27%
Black Anodised (Ebony) 5%
Pearl White Powder coat 89%
Black Satin Powder coat 4%
If the door panel was clear anodised (LRV 70%), then you would need a door jamb with an LRV 53% or less. i.e. 30% contrast.
Visual Indicators on GlazingWhere there is no chair rail, handrail or transom, all frameless or fully glazed doors, sidelights, including any glazing being mistaken for a doorway or opening;
■ Shall be clearly marked for the full width with a solid and non-transparent contrasting line■ Shall be no less than 75mm wide and extend across the full width of the glazing panel■ Lower edge of the contrasting line shall be between 900 and 1000mm above the fl oor; and■ Shall provide a minimum luminance contrast of 30%.
For buildings where AS1428.1 is not required to be met such as houses, then the manifestation requirements of AS1288 should be applied.
OTHERElectronic closer. Electronic door closers are also an option for hinged doors, details on these options are available from hardware suppliers.
20 ■ URBAN SERIES SLIDING DOORS
21
Notes
AS1428.1 Design for access and mobility – Part 1: General requirements for access – New building work.
DDA The Disability Discrimination Act, makes it against the law for public places to be inaccessible to people with a disability. This applies to existing places as well as places under constructions (https://www.humanrights.gov.au/our-work/disability-rights/dda-guide-ins-and-outs-access).
Capral LimitedABN 78 004 213 692
1800 ALUMINIUM (258 646)capral.com.au
Download the Capral Hub Appfor all the latest
architectural product andtechnical information.
Volume 2 | April 2021
Top Related