10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Handled by professionals
directional drilling services
www.nt-serv.com
NewTech Services LLC is a rapidly developing Russian service company providing high-technology services during well construction.
The Department provides directional drilling, Measurement-While-Drilling and Logging-While-Drilling services using its own equipment in the Russian Federation, the CIS, and far abroad: Uzbekistan, Serbia, USA, Venezuela and others.
High-skilled personnel, operation experience gained by the company and the use of advanced technologies and world quality standards and industrial safety practices ensure the sustained high performance of the company.
An integrated approach based on detailed planning, monitoring and optimization helps cut down the drilling time and make the services more effective.
NewTech Services: DirecTioNal DrilliNg ServiceS
2
introduction
service centers: Nizhnevartovsk, Almetievsk, Perm, Samara, Houston
plants: Perm, Samara, Houston, Aberdeen
Samara Perm
Saratov
Almetievsk
Muravlenko
Noyabrsk
Nizhnevartovsk
StrezhevoyKhanty-Mansiysk
Orenburg
Izhevsk
UsinskUrengoy
Kogalym
Elista Megion
regions of work
RussiaUzbekistanVenezuelaUSASerbia
NewTech Services: DirecTioNal DrilliNg ServiceS
3
Manufacturing facilities and regional offices
newtecH services Manufactures tHe following equipMent:
Manufactures MWD system components in Houston, USA http://www.smsprecisiontech.com
Assembles MWD systems with a hydraulic communication channel in Houston, USA (NewTech MWD Services, LLC)http://www.newtechmwd.com
Manufactures and assembles MWD systems with an electromagnetic communication channel in Samara (TechGeoBur LLC)http://tehgeobur.ru
Manufactures induction logging tools (RMS Ltd., Aberdeen)
Manufactures downhole drilling equipment at a Perm plant (Gidrobur-service CJSC)http://www.gidrobur-s.ru
– hydraulic downhole motors (HDMs)
– HDM tool faces with solid and adjustable azimuth angles
– impact load devices for releasing stuck drill strings (drilling jars)
NewTech Services: DirecTioNal DrilliNg ServiceS
4
– Mwd systeMs witH a Hydraulic coMMunication cHannel*
– Mwd systeMs witH an electroMagnetic coMMunication cHannel*
– Multiple frequency propagation wave resistivity tool / Mfpwr
* All NewTech Services MWD systems have Instrument Type Approval Certificates issued by the Federal Agency for Technical Regulation and Metrology.
NewTech Services: DirecTioNal DrilliNg ServiceS
5
Mwd and lwd systeMs
MWD systems with a hydraulic communication channel made by NewTech MWD offer high-speed data transmission, are retrievable and can be used for drilling in extreme temperature conditions.
Long battery life (400+ hours) helps minimize the risks of NPT and extra trips.
NewTech Services: DirecTioNal DrilliNg ServiceS
6
Mwd systeMs witH a Hydraulic coMMunication cHannel
idM - intelligent directional Module – specifications
Length 1.36m
Diameter 47mm
Operation Voltage Range 10V-30V
Current at 28V: 100 mA Max, 10 mA Idle
Power Usage: 0.25W Idle, 3W Peak
Shock 1000G, 0.5 mSec, half-sine
Inclination Absolute ±0.1° Spread ±0.1°
Azimuth (Magnetic dip angle at < 70°):
at 5° inclination Absolute ±1.2° Spread ±1.0°
at 10° inclination Absolute ±1.0° Spread ±0.75°
at 90° inclination Absolute ±0.5° Spread ±0.5°
Tool face accuracy, axial rotation, 10 through 90 inclination: ±1.0°
Total g field accuracy, absolute ±5.0 мG
Total H field accuracy, absolute 3.0 mguass
RPM measurement, 10-255 RPM: ±0.5% of value
Flow Rate
5-12 L/sec (for 89mm NMDC)
12-23 L/sec (for 120mm NMDC)
23-49 L/sec (for 172mm NMDC)
30-83 L/sec (for 203mm NMDC)
operational requirements
Vibration Damper Fully Charged
Maximum Pressure 138 MPa
Maximum Operating Temperature 175° C
Minimum and Maximum Critical Temperatures -40° C – 185° C
Vibration 20g RMS 15-200 Hz
Mud Sand Content 1%
Vibration Resistance 20 GRMS, 15-500 Hz
Shock Resistance 1000 G, (1000 G at pulse length 0.5 ms)
Mud Types OBM, WBM
Wireline Retrievable Yes
Drill pipe filter Recommended for use during circulation
Magnetometer and accelerometer data combination tool face setting Adjustable
NewTech Services: DirecTioNal DrilliNg ServiceS
7
pulser specifications ipgM – intelligent pulser gamma Module itpM – intelligent tolteq pulser Module)
Length 1.45 m 1.09 m
Gamma Module Yes None
Diameter 47 mm
Operation Voltage Range 20V-30 V
Current 15 mA Idle 6 mA Idle
Operating Temperature 175 °С
Critical Temperature -40 °С to 185 °С
Vibration 20 g RMS 15-500 Hz
Shock 1000 G, 0.5 mSec, half-sine
NewTech Services: DirecTioNal DrilliNg ServiceS
8
MWD systems with an electromagnetic communication channel NewTech EM help cut down well construction time significantly due to even higher speed data transmission.
These systems are capable of maintaining steady signal transmission at up to 3,000 m down and may be used in coupling with NewTech MWD systems.
NewTech Services: DirecTioNal DrilliNg ServiceS
9
Mwd systeMs witH an electroMagnetic coMMunication cHannel
Mwd system with an electromagnetic communication channel. specifications
Nominal Outside Diameter 178 mm 203 mm
Length 10 m
Weight 1,150 kg 1,700 kg
Flush Fluid Flow Rate 25-70 L/sec 25-70 L/sec
Maximum Operating Temperature 100 °С
Maximum Pressure 60 MPa
Static Mode Yes
Gamma Module Yes (optional)
Inclination Accuracy ±0.1º
Azimuth Accuracy (at inclination more than 3.2º) ±2º
Tool Face Error ±2º
Data Transmission Rate 10 bit/sec
Maximum Signal Transmission Depth 3,000 m vertical (depends on geological conditions)
NewTech Services: DirecTioNal DrilliNg ServiceS
10
Our Multiple Frequency Propagation Wave Resistivity Tool / MFPWR is used for Logging-While-Drilling, it enables measuring specific electromagnetic attenuation and phase-difference resistivity in any type of mud at two frequencies, 400 kHz and 2 MHz.
NewTech Services: DirecTioNal DrilliNg ServiceS
11
Multiple frequency propagation wave resistivity tool / Mfpwr
Mfpwr specifications
Outside Diameter 89 mm, 120 mm, 172 mm, 209 mm, 241 mm
Measurement High-Frequency Logging of Electromagnetic Resistivity
Operating Frequencies 400 kHz, 2 MHz
Measurement Range 0.2 - 2000 ohm-m
Accuracy 50 ohm-m ± 2% 200 ohm-m ± 10%
Depth of Investigation 0.94-1.93 m
Vertical Resolution 20 cm
Power Supply Lithium battery and turbine
Battery Life 400 hours
Maximum Operating Temperature 175 °С
Critical Temperature 200 °С
Maximum Pressure 138 MPa
Vibration Resistance 20 g RMS 30-300 Hz
NewTech Services: DirecTioNal DrilliNg ServiceS
12
SAMPLE LOG
NewTech Services: DirecTioNal DrilliNg ServiceS
13
The Geosteering Department provides geosteering services for all kinds of wells including complex ones, and LWD log interpretation during directional drilling by NewTech Services and outside service companies.
NewTech Services: DirecTioNal DrilliNg ServiceS
14
geosteerin
The downhole drilling motors we make are a line of DSHOTR 95-240 mm motors manufactured by GIDROBUR-SERVICE. They have various power characteristics enabling to select an optimum drilling technique.
The drilling jars we make are double-acting hydromechanical and hydraulic jars made by GIDROBUR-SERVICE and WENzEL.
NewTech Services: DirecTioNal DrilliNg ServiceS
15
downHole drilling Motors and Jars
We use the following software for cross-section modeling and engineering calculations:
– Landmark Software: COMPASS, WELLPLAN– BURSOFTPROEKT
COMPASS is an industry-leading application for planning directional wells, measurement management, graph plotting, and wellbore collision analysis.
WELLPLAN and BURSOFTPROEKT offer drilling engineers an entire range of tools for planning, design and modeling downhole operations.
The use of integrated technologies helps perform engineering studies of the BHA, predict work string loads, analyze drill string sticking and the cementing process, and calculate hydraulic parameters and blowout scenarios.
NewTech Services: DirecTioNal DrilliNg ServiceS
16
software
COMPASS plan editor with three live graphic viewsWallplot composer can produce detailed engineering plots
NewTech Services: DirecTioNal DrilliNg ServiceS
17
THE DIRECTIONAL DRILLING REMOTE MONITORING CENTER WORKS ROUND-THE-CLOCK providing service QC; it receives real-time data on each operation.
High-skilled engineers of the Center keep track and provide real-time technical support of the operations by way of satellite data transmission and full access to the recording PC of the field crew.
key tasks and advantages of tHe reMote Monitoring center:
24/7 control and technical support of the services;
On-line well path design, engineering calculations and modeling;
Simplification of drilling interaction and decision-making;
Drilling management common information space.
NewTech Services: DirecTioNal DrilliNg ServiceS
18
directional drilling reMote Monitoring and control center
organization of tHe newtecH services directional drilling and Mwd center
Technical Director
Directional Drilling Monitoring & Control
Department
Watches DD operations in real-time mode, consults
engineers, coordinators, field crew, and Client
representatives in various process-related situations.
Makes all relevant well plan calculations
promptly.
Monitors signal quality, the measurement process,
log timing and quality and other MWD-related processes in real-time
mode.
Supervises compliance with all Health & Safety
standards. Makes field trips
to check if all standards are complied with.
Provides the technical capability of data transmission, data
visualization and technical support related to data
transmission, and supports 24-hour smooth operation of the Directional Drilling
and MWD Center.
Well Planning Department
Remote MWD Department
Duty Health & Safety Engineer
Online Monitoring and Real-Time Data
Transmission Service
NewTech Services: DirecTioNal DrilliNg ServiceS
19
Drilling horizontal wells of 1000+ m using downhole drilling motors
Drilling vertical wells of 4,500+ m measured depth
Sidetracking off cement plugs and openhole sidetracking
Drilling high-viscous oil wells with 5 m wellbore spacing
Application of a combined MWD system (electromagnetic+hydraulic channel) for deep well drilling without the need of extra trips
Drilling wells of 3,000+ m measured depth with disastrous lost circulation
Drilling wells with a high build-up angle (more than 5 deg./10 m)
NewTech Services: DirecTioNal DrilliNg ServiceS
20
engineering acHieveMents and experience
+7 (495) 363-68-74 +7 (495) 363-68-75 [email protected]
Top Related