© NEC Electronics Corporation 2003, 2006 Printed in Japan
Document No. PX10427EJ04V0TN (4th edition)
Date Published December 2006 NS CP(N)
Technical Note
Design Kit (for AWR Microwave Office)User’s Manual
Technical Note PX10427EJ04V0TN 2
Windows XP is either a registered trademark or a trademark of Microsoft Corporation in the United
States and/or other countries.
The information in this document is current as of December, 2006. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information.No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document.NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information.While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features.NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application.
(Note)
•
•
•
•
•
•
M8E 02. 11-1
(1)
(2)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries."NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
Computers, office equipment, communications equipment, test and measurement equipment, audioand visual equipment, home electronic appliances, machine tools, personal electronic equipmentand industrial robots.Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disastersystems, anti-crime systems, safety equipment and medical equipment (not specifically designedfor life support).Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, lifesupport systems and medical equipment for life support, etc.
"Standard":
"Special":
"Specific":
Technical Note PX10427EJ04V0TN 3
Major Revisions in This Edition
Page Description
p.5 1. INTRODUCTION
• Change the name of our corporation to NEC Electronics Corporation Compound Semiconductor
Devices Division
• Modification of Microwave Office Version
• Modification of Microwave Office installation directory C:\Program Files\AWR\AWR2006\
• Change the name of directory “XML Library” to “Libraries”
pp.6, 7 3. DESIGN KIT INSTALLATION
• Modification of Microwave Office installation directory C:\Program Files\AWR\AWR2006\
• Addition of directory .\Library\NEC_DEVICES\IC\3LNA
pp.9, 10, 11 4. DESIGN KIT APPLICATION
• Change the name of directory “XML Libraries” to “Libraries”
• Addition of directory .\Library\NEC_DEVICES\IC\3LNA
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
Technical Note PX10427EJ04V0TN 4
CONTENTS
1. INTRODUCTION..................................................................................................................................... 5 2. DESIGN KIT DOWNLOAD AND UNZIPPING FILE.......................................................................... 5
3. DESIGN KIT INSTALLATION .............................................................................................................. 6
4. DESIGN KIT APPLICATION ................................................................................................................ 8
5. SIMULATION EXAMPLE..................................................................................................................... 13
Technical Note PX10427EJ04V0TN 5
1. INTRODUCTION
This manual describes how to use the design kit (kit that provides the device model parameters and layout
information for NEC Electronics Corporation Compound Semiconductor Devices Division products for use in
Microwave Office, hereafter referred to as “design kit”) from installation to performing simulation on the Designer
schematic screen.
Although the required operations can basically be performed by operating the design kit in accordance with the
figures in this manual, some operations may differ partially depending on the environment used.
This manual is described based on the following environment. See the manuals for the PC, etc. used in the actual
environment.
<Environment used in this manual>
Platform :PC
OS :WindowsTM XP Professional
Microwave Office :Version 7.0
Microwave Office installation directory :C:\Program Files\AWR\AWR2006\
Caution If you are using Microwave Office in an environment that is always connected to the Internet, then
you do not need to install this design kit. Device parameters and layout information that is
identical to that provided by this design kit can be used by selecting Circuit Elements – Libraries
– *AWR web site in the Microwave Office element browser. (However, it may not be possible to
use the XML Library depending on the network environment.)
2. DESIGN KIT DOWNLOAD AND UNZIPPING FILE
Download the design kit and unzip it using the compression/extraction application included with the kit.
<R>
<R>
<R>
<R>
Technical Note PX10427EJ04V0TN 6
3. DESIGN KIT INSTALLATION
(1) Move the unzipped design kit (all files in \NEC_DEVICES) to C:\Program Files\AWR\AWR2006\Library.
Caution If the NEC_DEVICES folder already exists in this Library folder, delete the NEC_DEVICES folder
before moving the decompressed design kit.
The directory in the figure above is included in
\NEC_DEVICES.
<R>
Technical Note PX10427EJ04V0TN 7
(2) Open lib.xml in C:\Program Files\AWR\AWR2006\Library using a text editor such as MemoPad and add the
line shown in the figure below. Save this file and close the text editor.
Caution If the design kit has been installed before and this added line already exists, do not change
lib.xml.
<R>
Technical Note PX10427EJ04V0TN 8
4. DESIGN KIT APPLICATION
(1) Start up Microwave Office (or restart it if it is already running) and open a circuit diagram screen (Schematic).
Technical Note PX10427EJ04V0TN 9
(2) Open the element browser and select [Circuit Elements] → [Libraries] → [NEC_DEVICES]. The device model
categories included in this design kit are displayed in the upper panel. When a category is selected, a list of the
device models included in that category is displayed in the lower panel.
<R>
Technical Note PX10427EJ04V0TN 10
(3) Drag the device model and place it on the schematic.
Select the device to be simulated from the lower frame of the element browser and drag it to the schematic.
The device can be placed as shown below by clicking it.
<R>
Technical Note PX10427EJ04V0TN 11
(4) When the layout display command is selected, the corresponding package is displayed.
<R>
Technical Note PX10427EJ04V0TN 12
Caution When the NEC_DEVICES library is called on the circuit diagram, the following warning message
may be displayed. This warning message is displayed as a result of a mismatch between the size
of the layout database currently in use and the database size of the NEC_DEVICES library.
The database size of the NEC_DEVICES library is 0.0005 mm.
Otherwise, the basic part usage is the same as for the standard component of Microwave Office.
Technical Note PX10427EJ04V0TN 13
5. SIMULATION EXAMPLE
NEC Electronics Corporation1753, Shimonumabe, Nakahara-ku,Kawasaki, Kanagawa 211-8668, JapanTel: 044-435-5111http://www.necel.com/
[America]
NEC Electronics America, Inc.2880 Scott Blvd.Santa Clara, CA 95050-2554, U.S.A.Tel: 408-588-6000 800-366-9782http://www.am.necel.com/
[Asia & Oceania]
NEC Electronics (China) Co., Ltd7th Floor, Quantum Plaza, No. 27 ZhiChunLu HaidianDistrict, Beijing 100083, P.R.ChinaTel: 010-8235-1155http://www.cn.necel.com/
NEC Electronics Shanghai Ltd.Room 2511-2512, Bank of China Tower,200 Yincheng Road Central, Pudong New Area, Shanghai P.R. China P.C:200120Tel: 021-5888-5400http://www.cn.necel.com/
NEC Electronics Hong Kong Ltd.12/F., Cityplaza 4,12 Taikoo Wan Road, Hong KongTel: 2886-9318http://www.hk.necel.com/
NEC Electronics Taiwan Ltd.7F, No. 363 Fu Shing North RoadTaipei, Taiwan, R. O. C.Tel: 02-8175-9600http://www.tw.necel.com/
NEC Electronics Singapore Pte. Ltd.238A Thomson Road, #12-08 Novena Square, Singapore 307684Tel: 6253-8311http://www.sg.necel.com/
NEC Electronics Korea Ltd.11F., Samik Lavied’or Bldg., 720-2,Yeoksam-Dong, Kangnam-Ku,Seoul, 135-080, KoreaTel: 02-558-3737http://www.kr.necel.com/
For further information, please contact:
G06.11A
[Europe]
NEC Electronics (Europe) GmbHArcadiastrasse 1040472 Düsseldorf, GermanyTel: 0211-65030http://www.eu.necel.com/
Hanover OfficePodbielskistrasse 166 B30177 HannoverTel: 0 511 33 40 2-0
Munich OfficeWerner-Eckert-Strasse 981829 MünchenTel: 0 89 92 10 03-0
Stuttgart OfficeIndustriestrasse 370565 StuttgartTel: 0 711 99 01 0-0
United Kingdom BranchCygnus House, Sunrise ParkwayLinford Wood, Milton KeynesMK14 6NP, U.K.Tel: 01908-691-133
Succursale Française9, rue Paul Dautier, B.P. 5278142 Velizy-Villacoublay CédexFranceTel: 01-3067-5800
Sucursal en EspañaJuan Esplandiu, 1528007 Madrid, SpainTel: 091-504-2787
Tyskland FilialTäby CentrumEntrance S (7th floor)18322 Täby, SwedenTel: 08 638 72 00
Filiale ItalianaVia Fabio Filzi, 25/A20124 Milano, ItalyTel: 02-667541
Branch The NetherlandsSteijgerweg 65616 HS EindhovenThe NetherlandsTel: 040 265 40 10
专注于微波、射频、天线设计人才的培养 易迪拓培训 网址:http://www.edatop.com
射 频 和 天 线 设 计 培 训 课 程 推 荐
易迪拓培训(www.edatop.com)由数名来自于研发第一线的资深工程师发起成立,致力并专注于微
波、射频、天线设计研发人才的培养;我们于 2006 年整合合并微波 EDA 网(www.mweda.com),现
已发展成为国内最大的微波射频和天线设计人才培养基地,成功推出多套微波射频以及天线设计经典
培训课程和 ADS、HFSS 等专业软件使用培训课程,广受客户好评;并先后与人民邮电出版社、电子
工业出版社合作出版了多本专业图书,帮助数万名工程师提升了专业技术能力。客户遍布中兴通讯、
研通高频、埃威航电、国人通信等多家国内知名公司,以及台湾工业技术研究院、永业科技、全一电
子等多家台湾地区企业。
易迪拓培训课程列表:http://www.edatop.com/peixun/rfe/129.html
射频工程师养成培训课程套装
该套装精选了射频专业基础培训课程、射频仿真设计培训课程和射频电
路测量培训课程三个类别共 30 门视频培训课程和 3 本图书教材;旨在
引领学员全面学习一个射频工程师需要熟悉、理解和掌握的专业知识和
研发设计能力。通过套装的学习,能够让学员完全达到和胜任一个合格
的射频工程师的要求…
课程网址:http://www.edatop.com/peixun/rfe/110.html
ADS 学习培训课程套装
该套装是迄今国内最全面、最权威的 ADS 培训教程,共包含 10 门 ADS
学习培训课程。课程是由具有多年 ADS 使用经验的微波射频与通信系
统设计领域资深专家讲解,并多结合设计实例,由浅入深、详细而又
全面地讲解了 ADS 在微波射频电路设计、通信系统设计和电磁仿真设
计方面的内容。能让您在最短的时间内学会使用 ADS,迅速提升个人技
术能力,把 ADS 真正应用到实际研发工作中去,成为 ADS 设计专家...
课程网址: http://www.edatop.com/peixun/ads/13.html
HFSS 学习培训课程套装
该套课程套装包含了本站全部 HFSS 培训课程,是迄今国内最全面、最
专业的HFSS培训教程套装,可以帮助您从零开始,全面深入学习HFSS
的各项功能和在多个方面的工程应用。购买套装,更可超值赠送 3 个月
免费学习答疑,随时解答您学习过程中遇到的棘手问题,让您的 HFSS
学习更加轻松顺畅…
课程网址:http://www.edatop.com/peixun/hfss/11.html
`
专注于微波、射频、天线设计人才的培养 易迪拓培训 网址:http://www.edatop.com
CST 学习培训课程套装
该培训套装由易迪拓培训联合微波 EDA 网共同推出,是最全面、系统、
专业的 CST 微波工作室培训课程套装,所有课程都由经验丰富的专家授
课,视频教学,可以帮助您从零开始,全面系统地学习 CST 微波工作的
各项功能及其在微波射频、天线设计等领域的设计应用。且购买该套装,
还可超值赠送 3 个月免费学习答疑…
课程网址:http://www.edatop.com/peixun/cst/24.html
HFSS 天线设计培训课程套装
套装包含 6 门视频课程和 1 本图书,课程从基础讲起,内容由浅入深,
理论介绍和实际操作讲解相结合,全面系统的讲解了 HFSS 天线设计的
全过程。是国内最全面、最专业的 HFSS 天线设计课程,可以帮助您快
速学习掌握如何使用 HFSS 设计天线,让天线设计不再难…
课程网址:http://www.edatop.com/peixun/hfss/122.html
13.56MHz NFC/RFID 线圈天线设计培训课程套装
套装包含 4 门视频培训课程,培训将 13.56MHz 线圈天线设计原理和仿
真设计实践相结合,全面系统地讲解了 13.56MHz线圈天线的工作原理、
设计方法、设计考量以及使用 HFSS 和 CST 仿真分析线圈天线的具体
操作,同时还介绍了 13.56MHz 线圈天线匹配电路的设计和调试。通过
该套课程的学习,可以帮助您快速学习掌握 13.56MHz 线圈天线及其匹
配电路的原理、设计和调试…
详情浏览:http://www.edatop.com/peixun/antenna/116.html
我们的课程优势:
※ 成立于 2004 年,10 多年丰富的行业经验,
※ 一直致力并专注于微波射频和天线设计工程师的培养,更了解该行业对人才的要求
※ 经验丰富的一线资深工程师讲授,结合实际工程案例,直观、实用、易学
联系我们:
※ 易迪拓培训官网:http://www.edatop.com
※ 微波 EDA 网:http://www.mweda.com
※ 官方淘宝店:http://shop36920890.taobao.com
专注于微波、射频、天线设计人才的培养
官方网址:http://www.edatop.com 易迪拓培训 淘宝网店:http://shop36920890.taobao.com
Top Related