KISTNER GmbH & Co. KG | Industriestraße 7 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
DECKEL MAHO DMF 180
5 axes simultaneous machining center
Make and model DECKEL MAHO DMF 180 Manufacturer year 2011 Control HEIDENHAIN iTNC 530 mit SmarT.NC Machine number 15175181414 Travels X - 1.800 mm / Y - 700 mm / Z - 700 mm Rotary table C-axis Ø 750 mm / nx 360° Swivel head B-axis 18.000 rpm / +/- 110°
LINK to the machine
2 - DECKEL MAHO DMF 180
TECHNICAL DATA
Milling head Speed, stepless programmable 20 – 18.000 1/min
Speed, in operation mode 20 – 800 1/min
Drive power max. 40% DC 35 kW
Rated power 100% 25 kW
Max. spindle torque 40% DC 130 Nm
Rated torque 100% DC 87 Nm
Tool attraction force 9 kN
Performance chart
3 - DECKEL MAHO DMF 180
Feed drive AC-Servomotors for axes X, Y, Z, B, C
Feed speed, stepless programmable (X,Y,Z) bis 20.000 mm/min
Rapid traverse (X,Y,Z) 40 m/min
Set up operation (mode 2) (X,Y,Z) 20 – 2.000 mm/min
Set up operation (mode 3) (X,Y,Z) 20 – 5.000 mm/min Working area X-axis 1.800 mm
Y-axis 700 mm
Z-axis 700 mm
Swivel head B-axis min./max. +/- 110°
Integrated rotary table Ø 750 mm C-axis nx 360°
4 - DECKEL MAHO DMF 180
Measuring system Resolution (X,Y,Z) 0,01 μm
Resolution (B,C) 0,02 μm
Working area dimensions Swivel milling head
1 Table center 2 Door opening
5 - DECKEL MAHO DMF 180
Collision space at the tool changer
Tool change in the work area The tool change takes place at any programmed X position. This is to be selected by the operator depending on the table layout. Alternatively, a fixed X position for the tool change can be defined by parameter. The tool is inserted vertically from below into the spindle by the gripper.
Collision topic The double gripper is positioned by linear movement of the swing stroke unit in the working space under the spindle. By vertical movement, the tool is inserted or removed. The tool is forcibly released from the swing stroke unit ejector right of the spindle nose.
The swivel radius of the double gripper with the tool creates an interference circuit of 290 mm above the work table, depending on the tool diameter and tool length, while the support bracket near the table has a fixed interference radius of 35 mm above the work table.
1 Focus point
6 - DECKEL MAHO DMF 180
7 - DECKEL MAHO DMF 180
Integrated NC rotary table Axis type C-Achse
Clamping surface rotation axis (Ø) 750 mm
Distance of the T-grooves 100 mm
Number of the clamping grooves / size 6 pieces / 18H12
Aligning groove / size 1 piece / 18H7
Centering bore (Ø) 30 H6 mm
Table torque 100% DC 2.000 Nm
Table torque 40% DC 2.400 Nm
Max. rotation of the table plate (rotation axis) 50 rpm
Turning range 360°
Loading max. (table center) 500 kg
8 - DECKEL MAHO DMF 180
Max. tool in the magazine Length 300 mm Diameter 130 mm
1 Tool radius max. 2 Swivel radius
Rigid table 2.100 x 700 mm with integrated rotary table Ø 750 mm Swivel head B-axis 18.000 rpm 18.000 min-1 / SK 40 Form A 120 tool places Probe infrared TS 649 Chip conveyor IKZ 40 bar / 600 l Rinsing gun Electronic hand wheel Direct measuring systems 3D QuickSet Operating mode 4 Oil and emulsion mist separator Blowing air 2 rotary inspection glasses Sealing air Rotary leadthrough for spindle User manual / Documentation Machine parameters
9 - DECKEL MAHO DMF 180
EQUIPMENT
MACHINE PICTURES
10 - DECKEL MAHO DMF 180
without clamping device
11 - DECKEL MAHO DMF 180
12 - DECKEL MAHO DMF 180
Weight, approx.
Machine 12.850 kg
FLOOR PLAN
13 - DECKEL MAHO DMF 180
FOUNDATION PLAN
14 - DECKEL MAHO DMF 180
1 Min. size of the bottom plate 2 Installation elements 3 Position of the adjusting screw
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
Thank you very much for your interest
KISTNER GmbH & Co. KG | Industriestrasse 7 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
LINK to the machine
Top Related