rfi.com.auCopyright RF Industries Pty Ltd 2018. Subject to change without notice.
Asia Pacific | EMEA | Americas
POWER · CONNECTIVITY · SIMPLICITYDC SPLICE
The Digital Drift DC Splice is installed immediately after a DC power supply to:
• Adapt regular DC power cable to the coaxial cable format;
• Protect the power supply from short circuits on the coaxial cable;
• Protect the coaxial cable and communications devices from reverse voltage beingapplied to the system.
P-43157-1
Specifications
SIZE AND WEIGHT
Height 80mm
Width 160mm / 220mm (housing / incl. glands)
Depth 80mm
Weight 1.0kg
ENVIRONMENTAL
Operating Temp -40 to 60°C
Operating Humidity 5% to 95% (Non-condensing)
Ingress Protection IP66 (Dust tight and protection against powerful water jets)
PROTECTION
Over Current Integrated magnetic circuit breaker
Reverse Voltage Internal 10A diode
ORDERING CODES
DD210-DC-SPL-5 Protected DC Splice, 5A breaker
DD210-DC-SPL-10 Protected DC Splice, 10A breaker
IN THE BOX
DC Splice Digital Drift DC Splice
POWER
Voltage Capability Up to 90V DC
Top Related