15

Features• High power brushless motor• Adjustable speed control for machine or tapping screws• Programmable three stage speed control• Bulilt-in screw counting function• Configures setting with optional remote controller• ESD(electrostatic discharge) protected housing• Detachable power code for easy maintenance

S Series (Variable speed Type) Model DLV30S/45S/70S For Machine Screws #3 - #5/16 (2.6 - 8.0 mm)

®

DLV30S06P DLV30S12P DLV30S20LDLV30S06P DLV30S12P DLV30S20L DEA0151N-AZ DEA0241N-AZ

Programmable Three Stage Speed Control Function

Built-in Screw Fastening Counter

<Step 2><Step 1>

<Step 3>High speed drive increases productivity.

• Batch counting• Fastening time monitoring, OK(Pass)/Fail(NG) decision

LEDs and Setting Buttons on the Screwdriver Part Names of the Remote Controller

Parameter LED Main LED

Workpiece LED

Mode LED Setting Buttons Setting Buttons

LCDPower Switch

Specifications

DLV30S06L-AYKDLV30S12L-AYKDLV30S20L-AYKDLV30S06P-AYKDLV30S12P-AYKDLV30S20P-AYKDLV45S06L-AYKDLV45S12L-AYKDLV45S06P-AYKDLV45S12P-AYKDLV70S06P-AYKDLV70S12P-AYK

Model StartingMethod Power Source Power

Consumption

Lever Start

Lever Start

Push to Start

Lever StartPush to Start

44 WPush to Start

Bit

Hex 1/4”

17.7 - 39.8(2.0 - 4.5)

33.6 - 62.0(3.8 - 7.0)

Torque Adjustment Lb-in(Nm)

3.5 - 14.2(0.4 - 1.6)

Low Torque Spring(Standard Accessory)

High Torque Spring(installed)

Screw Size (for reference)Weight lbs(g)

#3 - #11 2.6 - 5.0 mm

Inch Thread Metric Coarse Thread

1.57 (710)

1.85 (840)

1.90 (860)with Pistol Grip#9 - #13

#12 - #5/16”

4.5 - 6.0 mm

5.0 - 8.0 mm

10.6 - 26.6(1.2 - 3.0)

DEA0151N-A /DEA0241N-AZ

DEA0151N-A /DEA0241N-AZ

DEA0151N-A / DEA0241N-AZDEA0241N-AZ

DEA0151N-A / DEA0241N-AZ

DEA0241N-AZ

DEA0241N-AZ

DEA0241N-AZ

Setting Range of Speed and Torque (for reference only)

*Speed and torque are for reference only. The actual values depend on the fastening material and size of screws. The values are not guaranteed.

DLV30S06SpeedLevel

Speed(rpm)

Lv1Lv2Lv3Lv4Lv5Lv6Lv7Lv8Lv9

160220280340410470530590650

3.5 - 11.5 [0.4 - 1.3]3.5 - 17.7 [0.4 - 2.0]3.5 - 23.9 [0.4 - 2.7]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]

DLV45S06

Torque (Lb-in [Nm])

-17.7 - 21.2 [2.0 - 2.4]17.7 - 30.9 [2.0 - 3.5]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]

DLV70S06

- -

33.6 [3.8] 33.6 - 40.7 [3.8 - 4.6] 33.6 - 47.8 [3.8 - 5.4] 33.6 - 54.9 [3.8 - 6.2] 33.6 - 62.0 [3.8 - 7.0] 33.6 - 62.0 [3.8 - 7.0] 33.6 - 62.0 [3.8 - 7.0]

DLV30S12SpeedLevel

Speed(rpm)

Lv1Lv2Lv3Lv4Lv5Lv6Lv7Lv8Lv9

300420530640750860980

1,0901,200

3.5 - 5.3 [0.4 - 0.6]3.5 - 10.6 [0.4 - 1.2]3.5 - 15.9 [0.4 - 1.8]3.5 - 21.2 [0.4 - 2.4]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]

DLV45S12

Torque (Lb-in [Nm])

--

17.7 [2.0]17.7 - 23.0 [2.0 - 2.6]17.7 - 28.3 [2.0 - 3.2]17.7 - 33.6 [2.0 - 3.8]17.7 - 38.9 [2.0 - 4.4]17.7 - 39.8 [2.0 - 4.5]17.7 - 39.8 [2.0 - 4.5]

DLV30S20SpeedLevel

Speed(rpm)

Lv1Lv2Lv3Lv4Lv5Lv6Lv7Lv8Lv9

500690880

1,0601,2501,4401,6301,8102,000

3.5 [0.4]3.5 - 7.0 [0.4 - 0.8]

3.5 - 10.6 [0.4 - 1.2]3.5 - 14.1 [0.4 - 1.6]3.5 - 17.7 [0.4 - 2.0]3.5 - 21.2 [0.4 - 2.4]3.5 - 24.7 [0.4 - 2.8]3.5 - 26.6 [0.4 - 3.0]3.5 - 26.6 [0.4 - 3.0]

Torque (Lb-in [Nm])

DC, Brushless MotorDC, Brushless Motor

Power Supply

DEA0151N-AZDEA0241N-AZ

Model Input Ouput Maximum Rated Power100 - 240 V AC,50/60 Hz, 60 W 40 V DC

Weight lbs(g) Standard Accessory1.23 (560)1.98 (900)

150 W240 W

80” (2 m) cord withUL three-prong plug

Low speed start-up minimizes cross-threading, stripped screws.

Low speed at torque-up minimizes stripped screw and overshott torque.

16

S Series (Variable speed Type) Model DLV30S/45S/70S

Lead wire colors are the ones used in the optional signal cable ass’y DLW9090.

Pin No. Lead wire color Signal Input / outputRed

WhiteGreen

Yellow

BrownBlue

Gray

OrangePeachPurple

Yellow GreenBlack

123

4

56

7

89101112

+24 V DC power (supplied from outside)Workpiece SignalReset signal LINK-INForced stop signalOK SignalNG SignalLINK-OUTChannel switching signalTorque-up (count) signalChannel AChannel BChannel C0 V DC

InputInput

Input

OutputOutput

Output

OutputInputInputInput

*Either Pin No.4 or 7 must be selected, but not both.

Setting Range for Standard Models

*Graphs are for reference only. The actual values depend on usage conditions.

The low speed level is effective in hard-to-fasten applications such as tapped holes in sheet metal, stainless steel, and plastic.The high speed level is effective in shortening the cycle time in an assembly line.

Equipped with the External Signal ConnectorThe screwdriver can accept an external signal or output a signal externally through the external signal connector.

98

7

654

3

21

10

1211

Optional AccessoriesRemote ControllerRC1000

Standard Accessories

Signal Cable Ass’yDLW9090 (3 m)

Connection CordDLW9073 (1.5 m)

Relay Cord(To connect DLW9073 and DLW9073)DLW9074

*Standard accessory of screwdrivers

(Nm)

®

For DLV30S

. Bit NK35 x 2 x 7 x75

. Suspension Bail

. Low Torque Spring

. Connection Cord (DLW9073)

For DLV45S DLV70S

. Bit NK35 x 2 x 7 x75

. Suspension Bail

. Connection Cord (DLW9073)

. Pistol Grip (DLW2300ESD)

70.8

62.0

53.1

44.2

35.4

26.6

17.7

8.8

8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

21 43 65 7 8 9

DLV45S

DLV70S

DLV45S

DLV70S

DLV30SLow Torque Spring

DLV30SHigh Torque Spring

Torque Diagrams(for reference)

Torque Scale

Bit Torque (Lb-in)

200 400 600 800 1000 1200 1400 1600 1800 2000 2200

70.8

62.0

53.1

44.2

35.4

26.6

17.7

8.8

0

DLV30S06

DLV45S06

DLV70S06

DLV30S12

DLV45S12

DLV30S20

Speed (min-1)

Bit Torque (Lb-in)