Supplier Profile
CanTech International September 2011
Imeta
Imeta Srl
Strada Burla 279A 43122 Parma ItalyTel: + 39 0521 1688811Fax: + 39 0521 1688819 E-mail: [email protected]: www.imetasrl.com
Key Personnel
AdministratorsGuerrino Greci & Monica Greci
Sales ManagerRoberto Baroni
Technical ManagerGino Arturi
Company DescriptionIMETA has been designing and producing chucks
and rolls, upgrading kits and spare parts for seam-
ers since 1964. The company’s products for can
making and canning industries are the result of
in depth studies calling on extensive data banks
of 1,500 seaming profiles. Imeta has an operating
structure that brings together the passion for detail,
typical and emblematic of the craftsman culture,
and the technological element of an industrial
concern.
FacilitiesIMETA’s headquarters and manufacturing facili-
ties are located in Parma, Italy. Technical skilled
agents are available worldwide.
Company News & StatisticsFounded in 1964, IMETA has about 50 employees
and has been ISO 9002 certified since 1999.
ProductsProduction of chucks and rolls, spare parts and
change parts for any brand of seamer. Engineering
and production of up-grading kits for seamers:
special cover feeders, gear driven lower lifters,
inverter kit, end downstakers and much more.
Manufacturing of tools for can and cover produc-
tion: curling disks and sectors, beading sector
and roller, spin-flangers, dies for open top ends.
Overhauling and trade of second-hand seamers
and any can making machines.
Recent DevelopmentsAs shown at Metpack, IMETA has recently devel-
oped the new ‘DESMO KIT’ for Angelus 60L seamer.
The Kit includes: A ‘Box-style’ seaming cam that
controls both the opening and the return paths of
the seaming levers at any speed.
• A ‘Box-style’ ejector cam to ensure the correct
return of the Ejector Rods at any speed.
• A set of Seaming Cam Levers, that allow a simpli-
fied smg roll setting and a faster can size change
without the need to dismount the smg levers.
An Angelus 60L equipped with the new ‘DESMO
KIT’, the Gear Driven Lifters and the Single Knife
Cover Feeder will have performances pretty close
to that of an Angelus 61H.
55
P.55-IMETA SP 2011√.indd 61 7/9/11 11:18:30
Supplier Profile
September 2011 CanTech International 56
InnoScan K/S
Sødalsparken 118220 BrabrandDenmarkTel: +45 86 26 56 77Fax: +45 86 26 56 78E-mail: [email protected]: www.innoscan.dk
Key Personnel
Manager, Inspection SystemsGert Nielsen
InnoScan
Company DescriptionInnoScan K/S, founded in 1988, specialises in
dedicated inspection systems for easy-open ends
and DRD cans for the can making industry as well
as high-tech inspection systems for automatic qual-
ity control for pharmaceutical vials and ampoules.
FacilitiesFrom its headquarters with offices, laboratories, production and assembly facilities covering an area of 1700 sq m, InnoScan handles in-house multi-disciplinary development and design of mechanics, optics, lightning, electronic hardware, and software under strict Quality Control.
ProductsThe company’s main products for the can industry
are optical leak detection systems. The OptoScan
5000 for on-press EO-end testing. The self-indexing
stackable OptoScan 7000 modules for DRD cans
and the OptoScan 6000 for direct clamping to a
DRD press outlet.
Recent Developments & ServicesNEW! OptoScan 8500 end inspection system
for both interior and exterior surfaces has been
installed in Asia. The system inspects for defects in:
compound, curl, perimeter, surface, tab and rivet.
The system is designed for extended lifetimes at
elevated temperatures and has no fans and no
rotating HDs. One operator panel is networked
with multiple inspection modules.
Improved sensitivity of 2µm on full panel and 1µm
in rivet area – guaranteed, is offered with the most
recent OptoScan 5000 EOE leak detection system.
InnoScan provides full engineering support includ-
ing installation, commissioning and running in.
Standard products are customer adapted as
required.
Supplier Profile
September/October 2009 CanTech International 52
InnoScan K/S
Sødalsparken 118220 BrabrandDenmarkTel: +45 86 26 56 77Fax: +45 86 26 56 78E-mail: [email protected]: www.innoscan.dk
Key Personnel
Manager, Inspection SystemsGert Nielsen
InnoScan
Company DescriptionInnoScan K/S, founded in 1988, specialises in
dedicated inspection systems for easy-open ends
and DRD cans for the can making industry as well
as high-tech inspection systems for automatic qual-
ity control for pharmaceutical vials and ampoules.
FacilitiesFrom its headquarters with offices, laboratories, production and assembly facilities covering an area of 1700 sq m, InnoScan handles in-house multi-disciplinary development and design of mechanics, optics, lightning, electronic hardware, and software under strict Quality Control.
ProductsThe company’s main products for the can industry
are optical leak detection systems. The OptoScan
5000 for on-press EO-end testing. The self-indexing
stackable OptoScan 7000 modules for DRD cans
and the OptoScan 6000 for direct clamping to a
DRD press outlet.
Recent Developments & ServicesNEW! OptoScan 8500 end inspection system
for both interior and exterior surfaces has been
installed in Asia. The system inspects for defects
in: compound, curl, perimeter, surface, tab, and
rivet. The system is designed for extended lifetimes
at elevated temperatures and has no fans and
no rotating HDs. One operator panel is networked
with multiple inspection modules.
Improved sensitivity of 2µm on full panel and 1µm
in rivet area – guaranteed, is offered with the most
recent OptoScan 5000 EOE leak detection system.
InnoScan provides full engineering support includ-
ing installation, commissioning and running in.
Standard products are customer adapted as
required.
������������������������������ ������������������P.56-Innoscan-SP 2011√.indd 56 7/9/11 11:19:31
Supplier Profile
CanTech International September 2011
Intercan Group
YOUR CHOICEFor 2-piece can decorating
57
Intercan Group Limited38 Burners LaneKiln FarmMilton KeynesMK11 3HB, UKTel: +44 1908 270041Fax: +44 1908 270043E-mail: [email protected]: www.intercan.co.uk
Key Personnel
Managing DirectorPeter Strode
Design AssociatesJim Jeter, Doug Newman, Pieter Uithoven, Frank Fielding
Customer Service ManagerMarion Dumbleton
Warehouse and Logistics ManagerPeter Hughes
Senior Technical EngineerDarren Wiggins
Service EngineerMatt Roberts
Personnel ManagerCharlotte Silverthorn
Customer LiaisonLorraine Jagger
Company FormationIntercan is a privately owned company
based in Milton Keynes, UK. Founded in
1986 by Managing Director, Peter Strode,
Intercan specialises in supplies to the
beverage can making industry and par-
ticularly on improving and upgrading
equipment and systems. Intercan gained
ISO9002 quality certification in 1995.
ProductsFrom the early days of supplying replace-
ment parts for decorators, Intercan has
gone on to upgrade and develop com-
ponents and systems for improving print
quality and speed, through to supplying
complete decorator machines.
Intercan has worked closely with TD
Wright Company USA and helped in
developing and distributing its leading
edge products to the industry worldwide.
Recently celebrating the sale of its 25th
IPP8 Print Proofing Machine, Intercan has
become the industry standard for off-
line proofing and label development.
Reconditioned Rutherford Decorators
and Basecoaters are available.
The new Sovereign Advantage eight col-
our decorator is state of the art and will
set the standard for the next 10 years of
beverage can decorating.
The Sovereign Advantage programme is
forging ahead with the licensing agree-
ment that Intercan have with CMB
Engineering and we look forward to fur-
ther co-operation and development in
this area.
The Future Intercan is always working on new ideas
to improve the efficiency and quality of
beverage can decorating equipment.
These ideas will be announced over the
coming months.
If you print cans WATCH THIS SPACE
Contact us for:
• SOVEREIGN High Speed Can Decorator
• IPP8 Beverage Can Proofing Machine
• MK2010 Linear Bearing Spindle Disc
• ENOC® Taper Mounting Plate Cylinders
• Replacement Parts for Rutherford and Concord Decorators
• MONARCH 3-piece Can Decorator
• MT250 Mandrel Trip Spindle Disc
• MT350 Dual Track Linear Bearing Mandrel Trip Spindle Disc
• Upgrades for all 2-piece Decorators
• SOVEREIGN 8 Colour ADVANTAGE Decorator
Tel: +44 1908 270041
Fax: +44 1908 270043
E-mail: [email protected]
Visit us at: www.intercan.co.uk
P.57 SP INTERCAN 2011√.indd 63 7/9/11 11:20:34
I N T E R N A T I O N A L T H E R M A L S Y S T E M Swww.itsllcusa.com
USA � UNITED KINGDOM � CHINA
Create Your Own Stimulus Profit Package...
IBO
Cap End Drying Oven End Drying Oven Synthetic BeltRetrofit Kit
IBO with IntegratedOxidizer
Pin Oven Sigma Six®
Can Washer & Dry-off Oven
...when you contact us
to reserve your ITS
equipment and
preserve your profits!
All Rights Reserved. Copyright 2010.
P.26-ITS.indd 1 20/4/11 15:13:32
Supplier Profile
CanTech International September 2011
World Headquarters International Thermal Systems LLC
4697 W. Greenfield AvenueMilwaukee, WI 53214, USATel: +1 414 672 7700Fax: +1 414 672 8800E-mail: [email protected] or [email protected]: www.itsllcusa.com
European OfficeInternational Thermal Systems LtdQuatro House, Lyon Way, Frimley Road, Camberley, Surrey, GU16 7ER, UKTel: +44 7900 191352 E-mail: [email protected] or [email protected]
Asian OfficeIndustrial Thermal Systems (Shanghai) Co LtdNo 725 Peng Feng Road, Bldg 2, Da Gang, Town of Xiao Kunshun, Songjiang District, Shanghai, China, 201614Tel: +86 21 6774 1033Fax: +86 21 6774 2860E-mail: [email protected] or [email protected] Web: www.itsllcusa.com
International Thermal Systems
Company DescriptionInternational Thermal Systems (ITS) is a global origi-nal equipment manufacturer of industrial process ovens, furnaces, washers and associated material handling equipment for applications in automo-tive, aerospace, power generation, battery manu-facturing, building products, foundry and metal packaging industries.The ITS core foundation lies in the design, manu-facture, upgrade or retrofit of an integrated heat processing system. Equipped with proprietary tech-nologies, ITS works with the customer, to meet precise requirements while maximising productivity and providing cost-effective space and energy conserving solutions. The ITS team is honoured to have been awarded patents for ingenuity in process dryers, air flow circulation and product transfer applications. In a few cases, ITS equipment has revolutionised the entire industry heat processing methodology.ITS was established with the merging of three well-known and well respected names in the heat processing, finishing and metal decorating industries; Industrial Heat Enterprises International (IHEI), Oven Systems Incorporated (OSI), and LTG Technologies, Inc.
Metal Packaging Equipment DivisionRecognised for innovative technology. ITS installs a host of ovens, dryers, washers, thermal and ther-mal-regenerative exhaust air purification systems, catalytic exhaust air purification systems and sec-ondary heat recovery systems specifically for the
metal packaging industry.
ITS Can Washers Will Not Let Your Profits Leak Down the DrainPrecious chemical resources are recovered and re-used with our exclusive Belt Vacuum System. Roof mounted doors allow access to entire length of interior washer chamber so maintenance time and cost are lessened. Spray risers designed with ITS patented quarter-turn quick disconnects with full guide rails for easy maintenance and ensures operator safety.
59
The World’s Most Popular Pin OvenThe patented Sigma Six is designed to produce product faster and more efficiently than any other Pin Oven on the market today. The design incor-porates 60% fewer chain passes with 30% reduction in fuel consumption than a conventional pin oven and 2400 can per minute capacity without damage to can production.
We Stand Behind Our ConvectionsInternal Bake Ovens (IBO) utilises ITS air flow control above and below the tin line resulting in greater can stability and increased can output. Automated and manually adjusted supply duct systems avail-able to accommodate various can heights. Boasts reduced energy consumption through the use of synthetic conveyor belt technology with 100% metal fine elimination.
P.59 ITS THERMAL SP 2011√.indd 67 7/9/11 11:25:07
Supplier Profile
September 2011 CanTech International
INX International Ink Co
Metal Decorating Division10820 Withers Cove Park DrCharlotte, NC 28278, USATel: +1 704 372 2080Fax: +1 704 414 6491E-mail: [email protected]: www.inxinternational.com
Key Personnel
President & CEORick Clendenning
VP Sales – Metal Decorating DivisionDave [email protected]
VP Operations, Metal Deco DivisionDan [email protected]
VP International DivisionJonathan [email protected]
INX International Ink Co
Company DescriptionINX International Ink Co is the third largest producer
of ink in North America and a global supplier as
part of Sakata INX worldwide operations. We are
an industry leader offering a full line of ink and
coating technology for packaging, commercial
and digital print applications.
Our products include metal decorating, flexo-
graphic, gravure, heatset, no-heat commercial,
lamination, corrugated, sheetfed and UV/EB inks
as well as UV/EB and aqueous coatings.
Company Statistics• World’s leading producer of metal decorating inks
• Industry leader in water-based flexographic inks
• ISO certification
• Headquartered in Schaumburg, Illinois, INX has
over 20 facilities worldwide.
Products• AP No-Var two-piece metal decorating inks
• AP LoVOC two-piece metal decorating inks
• AP Tactile two-piece metal decorating inks
• AP Fluorescent two-piece metal decorating inks
• AP Phosphorescent two-piece metal decorating
inks
• INXCure TP ITX-free UV inks for two-piece food
cans
Recent Developments• AP Poly NoVar II next generation, non-varnish-
able two-piece ink system
• TP UV Fusion Hybrid ink system for applications
which require low migration (LM) and low odour
• TP LEC thermoset ink system for low temperature
cure
• MD UV Flatbed printer series, the first short run
digital production solution for flatsheet and three-
piece metal decorations
• CP100 UV digital cylindrical printer for short-run
production of two-piece cans and bottles.
60
P.60 INX SP 2011√.indd 64 7/9/11 11:27:38
Supplier Profile
CanTech International September 2011 61
KON-TEK Automation Co
405 Street N:8 Pınarbai,Izmir, Turkey
Tel: +90 232 479 10 10 pbxFax: +90 232 479 91 91Web: www.kontekotomasyon.com.tr
Contacts:
Business Development ManagerLütfi YÜCELFood & BeverageTel: +90 533 961 93 96E-mail:[email protected]
Project Sales ManagerAyhan ŞAHIN Tel: +90 532 262 26 65E-mail:[email protected]
KON-TEK Automation
Company DescriptionKON-TEK AUTOMATION has 15 years’ experience
in automation and electrical engineering industry
with its skilled electrical and electronic engineer-
ing team.
Our mission is to find the best ELECTRICAL
ENGINEERING solution for our customers in their
can line investments. Thus, KON–TEK has been
continiously designing its organisational structure
according to our customers’ demands and serving
them with success since 1994.
We can supply turnkey solutions for all Electrical
and Automation needs for a can line, which makes
life easier for the investors.
Our scope of work includes:
• MV Switchgear & Transformer
• LV Distrubution Panels
• Line Control Drive Panels
• Line Control Automation Panels
• Line Control PLC SW&HW
• IT SW Integration
• Complete Line Communication SW&HW
• Electrical Installation of a Complete Line
• Commissioning of all above mentioned
equipments and services.
Our slogan to investors and Equipment
Manufacturers is “WE CAN REDUCE YOUR
COST” by fulfilling your requirements on the
basis of standards. Our work with can lines
leads us everywhere in the world, including:
• Rexam Egypt 2008; complete line (MV-LV Panels,
PLC/SCADA Automation, Total Site Installation,
Total Commissioning)
• Val De Morillo Spain; Line Control MCC Panels, Spray
Machines MCC Panels, PLC/SCADA Automation,
Total Commissioning
• Rexam Turkey 2005; Line Control MCC Panels, MDP,
Site Installation (renewing the system)
• Rexam La Selva/Spain 2007; Printer MCC and
Automation Modernisation
• Rexam Egypt 2010; Complete Additional Line
Control Panels for Steel to Aluminium Conversion
& Complete Waste Water Treatment Plant
• Rexam Manisa 2011; Bodymaker Machine Panel
& Automation Software & Commissioning Energy
Saving Application Software Improvements for
Line
Nowhere is too far – we are at the crossroads of the continents.
Just call us, and we will be at your office with our experienced team.
P.61-KONTEK-SP2011√.indd 61 7/9/11 11:29:49
P.68-KBA.indd 10 14/7/11 13:32:05
Supplier Profi le
KBA-MetalPrint GmbH
Wernerstr 119-129D-70435 StuttgartTel: +49 711 69971 0Fax: +49 711 69971 670E-mail: [email protected]: www.kba-metalprint.de
Key Personnel
ManagementRalf Gumbel (CEO)
Financial DirectorAndreas Brand
Service DirectorMartin Heinemann
KBA-MetalPrint
Company ProfileKBA-MetalPrint is the leader in technical innova-
tions regarding metal decorating coating and
drying equipment for sheets as well as two-piece
cans. The name stands for quality, innovation and
continual technical development.
KBA-MetalPrint offers a complete service from the
initial concept to final printed metal sheets: multi-
colour printing and coating lines, thermal and UV
drying equipment as well as the corresponding air
purification solutions. KBA-MetalPrint supports the
customer starting with the concept of the installa-
tion up to the commissioning of the product.
FacilitiesKBA-MetalPrint has its headquarters in Stuttgart
and is a member of the KBA group, one of the
leading printing press manufacturers in the world.
Products• MetalStar series continuous grip, multicolour printing presses with speeds up to 10,000 sph, offered from two up to 10 colours.• Mailänder 222 printing presses, tough, fast, reliable, with speeds up to 7,000 sph, proven quality, robust design, outstanding reliability even with thick sheets up to 0.5 mm.• MetalCoat 470 and 480 coating machines for excellent coating quality. • HighEcon energy efficient drying ovens, based on the successful ECO-TNV module with energy savings up to 70%.• BeltStar and PinStar, two-piece drying ovens improve both curing quality and energy efficiency. Via advanced air flow technology it is possible to reduce the energy consumption by up to 25%. • UV curing systems.• Ovens for the drum industry. • Sheet management systems. Stackers in modular design (single, double or triple box).• Pile turners.• Prepress service• KBA CleanAir - Exhaust air purification systems.• Used machinery.
Recent Developments• MetalCoat 480 - the new coating generation. Individual drives for lacquer head, coating cylinder and bottom cylinder provide maximum flexibility and hence achieve the optimum and even lac-quer application. Whether applying conventional coatings or UV varnishes, the new MetalCoat 480 has the ideal solution. Through reinforced bearings it is also possible to use a lacquer plate cylinder. The standard two cylinder lacquer head can be replaced by a flexocoat system for the optimum UV varnish application. New features especially designed to reduce changeover times make this machine the most efficient coater on the market.
• Down gauging to 0.100 mm on tin sheets As part of the ‘Technology Network’, consist-ing of the companies ThyssenKrupp Rasselstein, Soudronic and KBA-MetalPrint, we will support customers to reduce material costs. While KBA-MetalPrint printing and coating lines for 0.12 mm tin sheets are already running successfully, we would like to point out that the technology to handle 0.100 mm tin sheets is now available for our new printing and coating lines.
• KBA-MetalPrint’s service offering includes four dif-ferent modules that are all aimed at insuring opti-mum availability and reli-ability of the production line for the entire service life of the plant, as well as upgrades that will future-proof the production line for changing market con-ditions. The service can be customised to suit the individual requirements of the customer.
63CanTech International September 2011
P.63-KBA-SP 2011√.indd 61 7/9/11 11:31:31
Supplier Profi le
September 2011 CanTech International 64
Lieb Precision Tool Inc.
1819 S. Murray BlvdColorado Springs, CO 80916USATel: +1 719 355 2600Fax: +1 719 596 3019Toll free +1 877 785 9609E-mail: [email protected]: www.liebpt.com
Wallram GroupThe WALLRAM Group is specialised in
hard material applications offering
products and service for different
business areas.
Our main focus is on the metal pack-
aging industry with the production
sites of Wallram in Germany and
Poland and LPT in the USA.
Lieb Precision Tool Inc.
The CompanyLPT Lieb Precision Tools Inc started years ago as a
specialist in providing ceramic tools and engineer-
ing for the metal container industry.
Today the recognised leader of ceramic necker
tooling to the can industry worldwide, LPT also pro-
vides a full range of can tooling “from the front of
the line to the back” using ceramic, carbide and
tool steel.
To meet the increasing demand for our products,
LPT has just relocated to a larger facility and is con-
tinuing to invest to increase capacity and product
range.
The BenefitWe have the ability to provide your “Design til
Implementation” needs. Our engineering staff has
a unique knowledge that encompasses can man-
ufacturing, tool design and material sciences.
This unique mixture of backgrounds allows us to do
more than meet our customers’ needs. It gives us
the ability to deliver performance that exceeds
them!
Our Products And ServiceLPT offers a full range of ceramic and carbide tool-
ing for can making operations, including Necker,
Bodymaker and Decorator tooling. We provide
new and reworked and/or refurbished tooling to
required quality standards.
We are an experienced technical resource to help
find solutions to whatever problems our customers
are experiencing. We troubleshoot not just tooling,
but also quality, spoilage, productivity and cost
problems.
We develop partnerships and processes to ensure
the successful design of tooling systems. Through
our dedicated employees and state of the art
equipment, we guarantee the highest precision
quality tooling to our customers.
LIEB PRECISION TOOL INC.1819 S. Murray Blvd · Colorado Springs · CO 80916 · USAtel +1 719 355 2600 · fax +1 719 596 3019 · toll free +1 877 785 9609 · www.liebpt.com · [email protected]
Can Tools & Engineering… from Design t i l Implementation
P.64-LIEB PRECISION-SP 2011√indd.indd 70 7/9/11 11:34:45
Supplier Profile
CanTech International September 2011 65
Lin Der Sheng Canmaking Machinery Co, Ltd
500 No. 135, Puu-Ne StYeh-Her LiChang Hua CityTaiwan Tel: +886 4 711 8143 or +886 4 711 9110 Fax: +886 4 711 6487 E-mail: [email protected]: www.can-making.com
Key Personnel
PresidentLin Gin-Sheng
Sales ManagerJoey Liu
Company Description
Lin Der Sheng Canmaking Machinery Co, Ltd was
founded in 1975. We specialise in the development
and manufacture of complete line machinery for
irregular can manufacturing.
In order to achieve the goal of lowering customers’
production costs improving quality and productivity,
the entire company is geared to developing new
machinery that improves can making technology.
To continue to offer excellent products, we insist on
improving and developing mechanical perform-
ance, decreasing the amount of waste material,
simplifying the working procedure and reducing
manpower.
Our aim is excellent communication and good serv-
ice to our customers.
Products• Various designs and sizes of cans in round, square, oval, rectangular and irregular shapes
• 5 gallon (17kg) square cans (straight or taper)• 5 gallon (20 litre) round pail cans (double or triple seam)
Lin der Sheng
• Biscuit/cookie cans in different sizes• Muffler pipes for automobiles• Cooking oil, paint and oil cans in different sizes• Moulds and spare parts• 1 gallon round taper cans• 200 litre steel drums
Recent Developments
New 5 gallon (17Kg) square can–square necking can
- smart-fit design provides stable canstack-up
without tilt, for easy transfer and transportation
- when the cans are side by side, only the seams
are in contact. The can bodies make no direct
contact, resulting in no wear on printing.
New 5 gallon (17Kg) square can – additional
paneling bars at R corners
- increased stack-up strength (30-40 per cent
higher)
- the same strength but with thinner can wall.
P.65-LIN DER SHENG-SP 2011√.indd 71 7/9/11 11:35:34
P.72-LITTELL AD.indd 72 26/8/11 16:25:49
Supplier Profile
CanTech International September 2011 67
Littell, LLC
1211 Tower RoadSchaumburgIllinois 60173USATel: +1 630 622 4700Fax: +1 630 622 4748E-mail: [email protected]: www.littell.com
Key Personnel
Vice President Sales & MarketingPaul Raimondi
Littell, LLC
Company DescriptionLittell is the world leader in sheeting line systems.
With over 300 systems installed worldwide, Littell’s
proven reliability of design together with factory
supported service engineers, assures continuous
and productive operation to the user.
FacilitiesLittell’s main factory is located in Schaumburg
(near Chicago, Illinois, USA) with additional capa-
bilities in Piqua, Ohio and Gaylord, Michigan. Our
Representative Network has offices in the USA,
Mexico, Europe, South America and the Far East.
StatisticsFounded in 1918, Littell employs a full staff of
sales, engineering, aftermarket and manufactur-
ing employees.
ProductsWith over 300 scroll lines installed worldwide, Littell
sets the standard for the container industry in
speed, accuracy, quality, and reliability. Supplying
over 90% of the worldwide demand for this spe-
cialised equipment, our commitment to continual
product development ensures process superior-
ity and investment advantages for our customers.
Recognised as the world leader in scroll sheeting
systems, Littell continues to provide the industry
with the latest in performance technology.
With speeds of up to 225 mpm providing output
ranging from 50-225 sheets per minute and the
ability to handle coils weighing up to 13.6 metric
tons, Littell’s RSL-1, LM-1E & 2E and BR-4E & 5E
models are designed to respond to the industry’s
demand for economical, high quality, continuous
production.
Recent DevelopmentsLittell is wholly owned by the Roberts family, based
in Gaylord Michigan, which also owns Perfecto
Industries.
Littell and Perfecto will be working together to
focus on customer service and product offerings
that meet the needs of the International markets
they serve.
Littell’s new precision straightener with small rolls
and full length backups is now standard equip-
ment on all new line shipments.
New non contact laser thickness gauge is now
available as an option. This new device is a
cost effective alternative to the typical contact
gauge.
Services• Supply of complete systems and auxiliary
equipment
• Rebuild and upgrading of existing equipment
• Spare parts
• Line audits
• Installation and start-up services
• Customer training
Littell, LLCWWW.LITTELL.COM
P.67 SP-LITTELL 2011√.indd 73 7/9/11 11:37:04
Minster Presses are well known in the metal packaging industryworldwide for their quality, durability, accuracy and excellent servicesupport. It only makes sense to include Minster Automationproducts with your Minster cupping press. By doing so, you canexpect the same performance from your Minster coil handlingequipment that you have enjoyed with your Minster cuppingpresses. To bring it all together, a Minster PMC control can integrateboth the press and coil handling equipment. This provides a singlesource of responsibility for your press and coil handling equipmentas well as aftermarket support. So when you are considering yournext cupping line, ask your cupping system provider to include boththe press and coil handling equipment from Minster.
Minster can now equip your entire line with Minster designed andmanufactured products including: • High Speed Servo Feeds, or Mechanical Cam Feeds • Pull Off Stands, • Stock Lubricators, • Reels, • Coil Cars, • Upenders, and • Pallet Decoilers.
240 West Fifth Street • Minster, OH 45865 U.S.A. • (419) 628-2331 • www.minster.com
CanTech_Layout 1 8/26/10 8:13 AM Page 1
Supplier Profile
CanTech International September 2011 69
The Minster Machine Company
240 W. Fifth StreetMinsterOhio 45865-0120USATel: +1 419 628 2331Fax: +1 419 628 3517Web: www.minster.com
Divisions• Machinery Division• Services Division• Automation Division• Midwest Manufacturing & Logistics
Key Personnel
President & CEOJohn Winch
Executive Vice President, Machinery and Automation Divisions David Winch
General Manager, Packaging GroupGreg Stueve
Director, Minster ServicesSteve Gruber
General Manager, Marketing & Sales – Automation DivisionRobert Allred
Minster Machine Co
Company DescriptionHeadquartered in Minster, Ohio for more than 115
years, The Minster Machine Company has become
a world leader in producing high quality products,
integrated systems and services to the material
forming industry. Minster’s product offering is tar-
geted to three distinct market segments: Contract
Stamping/OEM, Energyl/Electrical and Packaging.
FacilitiesMinster maintains a 75,000 sq ft metal casting plant,
a 30,000 sq ft heavy fabrications facility and a
270,000 sq ft precision machining and high quality
assembly area in Minster, Ohio as well as a preci-
sion machining and component assembly plant in
Beaufort, South Carolina. The company has sales
and service offices located throughout the world.
Company StatisticsMinster was founded in 1896, and employs approxi-
mately 500 people.
ProductsMinster produces a complete line of mechani-
cal power presses and related material handling
equipment. The presses are rated from 45 to
2,200 tons, with speeds of up to 1,000 strokes
per minute. For the packaging market segment,
products include cupping presses for two-piece
beer/beverage cans, presses for two-piece drawn
and redrawn sanitary food cans, presses for high
or low volume end (shell) production, easy open
end conversion presses and associated material
handling equipment. Material handling equipment
includes feeds, lubricators, reels, coil cars, upend-
ers/downenders and pallet decoilers.
ServicesMinster provides press and component remanu-
facturing, clutch conversions, field service, training,
equipment relocation, applied research, repair
parts and upgrade kits.
P.69-MINSTER SP 2011√.indd 77 7/9/11 11:39:30
P.70-ABI AD.indd 77 7/9/11 11:51:22
Supplier Profi le
CanTech International September 2011 71
Nordson Corporation300 Nordson DriveAmherst, Ohio 44001, USATel: +1 440 985 4000E-mail: [email protected]: www.nordson.com/container
Key Personnel
Global Sales ManagerAndreas TrouvainNorth America Sales ManagersMark Novotny and Andreas TrouvainLatin American Sales ManagerCarlos SanchezEUROPE, AFRICA and MIDDLE EAST:European Sales Manager Jose Manuel GorrizASIA: Container Sales ManagerChris LuiJAPAN: Container Sales ManagerShigenori KitasakoGlobal Marketing ManagerMark Novotny
Nordson offers a complete line of container coating and curing systems that can help you save money, improve productivity and meet ever-increasing environmental demands for sustainability.
From spray guns, controls and nozzles to induction curing ovens, our green solutions can provide savings of up to 15% in production costs through:
• Better quality• Higher manufacturing efficiency• Less downtime• Lower coating material consumption• Faster line speeds
What’s more, continued innovation allows us to spray new types of coatings, creating solutions that meet industry needs now and in the future.
Going green is easy when you trust the precision dispensing experts – Nordson. Call our specialists today for an evaluation of your processes and a demonstration on how we can help improve them.
We’ve got GREENsolutions for metal packaging.
© Nordson Corporation 2010 nordson.com � +1.440.985.4000
Company DescriptionNordson Container Systems Group is a leader in
providing complete system solutions for applying and
curing adhesives, sealants, lubricants and coatings to
two- and three-piece cans. Nordson also offers ultra-
violet curing and induction drying systems.
Nordson Corporation is headquartered in Westlake,
Ohio with manufacturing facilities throughout the
world. Nordson is a global sales and service organ-
isation with facilities for research and development,
lab testing and technical support.
Products• Advanced spray systems for two-piece and three- piece can lines include MEG® high speed spray
guns, SPC fluid controls, iTrax®spray controller and
process monitoring systems
• Specialised Dispensing Guns with fast, accurate material disposition
• High-performance Eco-Liner™ Compound Gun• Temperature Conditioning Unit (TCU) heats and cools• CleanSpray® system to clean airless spray nozzles automatically on line
Nordson
• UV Curing systems for can manufacturing• Powder coating equipment for metal tubes and cans
• Customised Lube systems to extend die life and greatly reduce amount of lube.
Recent Developments• Integrated iTrax® system that combines spray monitoring, timing control and spray pressure
control into one system
• iDry® Induction Compound Dryer for applying water-based end compounds at speeds up to
2,200 ends per minutes for aluminium beer and
beverage ends. New Spin Speed Monitor
function measures and monitors the rotational
speed of each chuck on the spray machine
• CoolWave® 2 UV Rim Cure system for coating bottom rim of two-piece D&I cans for increased
mobility and improved throughput
• ISC2 Induction Heating system for curing powder and liquid side-seam coatings on three-piece
cans.
P.71-NORDSON-SP 2011.√indd.indd 77 7/9/11 12:00:37
Division of Perm Machine & Tool Co. ‘inc.9660 Industrial Drive, PO Box 660, St. John, IN 46373-0660, U.S.A.
Tel: +1 219 365 5000 Fax: +1 219 365 4847www.permmachine.com [email protected]
MAILANDER/LTG COLOR LINE· (2) MAILANDER 122 PRESSES· MAXIMUM PRINT AREA 44 11/16” X 37 13/16” (1135mm X 960mm)· MICROGRAPHIC INK FOUNTAIN EACH UNIT· EPIC DAMPENING SYSTEMS· INTERDECK U.V. CURE (2 LAMPS)· MAILANDER 469 TRAIL COATER WITH ANILOX· 33 METER LTG 3 ZONE OVEN· LTG AUTOMATIC DOUBLE STACKER· LINE RATED AT 6600 SPH· ALL MANUALS AND DRAWINGS INCLUDED
MAILANDER/LTG COLOR LINEMAILANDER/LTG COLOR LINEONLY 6 YEARS RUN TIME
MAILANDER/LTG COATING LINE· MAILANDER 466 COATER WITH ANILOX· MAXIMUM SHEET SIZE 45 1/16” X 38 3/16” (1144mm X 976mm)· LTG 33 METER 3 ZONE OVEN WITH WICKET WASHER· LTG AUTOMATIC DOUBLE STACKER· LINE RATED AT 7500 SPH· ALL MANUALS AND DRAWINGS INCLUDED
PLEASE CONTACT US FOR DETAILED SPECIFICATIONS, PHOTOS AND QUOTATIONS
USED METAL DECORATINGEQUIPMENT
PERM w-pv3.indd 1 9/9/11 09:37:41
Supplier Profi le
CanTech International September 2011 73
Perm Machine & Tool
Company DescriptionSince 1970 Perm Machine & Tool Company has
been a worldwide supplier of replacement parts
for the metal decorating industry. With family ties
connected to the can making industry since the
late 1940s, Perm has the experience to deliver
innovative, solution based products to the market.
Products and Services• Oven Chain
• Wickets
• Oven Rail
• Lubrication systems
• Wagner Coaters
• Wagner Coater spares
• Hoe printing presses
• Magnetic Side gauging systems
• Robo roller storage system
• Accu-laser alignment tool
• Used Metal Decorating Equipment
• Rebuilding service
• Field technicians
• Equipment audits
• Over 500,000 spare parts in stock
Recent DevelopmentsFour years after the acquisiton of the HOE Printing
Press Company, Perm has revitalised the HOE
through upgrades and innovation. Perm has
begun a rebuild and exchange program as well
as offering new HOE presses.
For the past 40 years Perm hasbeen supplying replacement parts
to the can industry throughinnovative design, strict quality
standards, and utilization ofthe fi nest raw materials.Perm routinely produces
products that far exceed original equipment standards
2011 “Excellence in Exporting” Exporter of the year-
state of Indiana presented by Senator Richard Lugar
U.S. Dept. of Commerce
Export Achievement Award
Meet the presses that do 95% of all the metaldecorating in America
P.73-PERM-SP 2011√.indd 79 9/9/11 09:01:03
September 2011 CanTech International 74
Supplier Profile
CanTech International September 2011
P.74,75 PRESSCO SP 2011√.indd 80 7/9/11 12:09:51
Supplier Profi le
CanTech International September 2011 75CanTech International September 2011
P.74,75 PRESSCO SP 2011√.indd 81 7/9/11 12:09:55
Supplier Profi le
September 2011 CanTech International 76
Prime Controls, Inc
4528 Gateway CircleDayton, Ohio 45440-1712 USATel: +1 937 435 8659Fax: +1 937 435 2091E-mail: [email protected]
Key Personnel:PresidentLarry Tucker
Sales ManagerMark Mohn
Production CoordinatorStephanie Miller
Senior EngineerChuck Connor
Prime Controls
Company DescriptionPrime Controls is a world leader in
metal thickness detection for flat
sheet metal production. With years
of experience in the can making
industry, we provide a wide range of
high precision sensors and controls
for varous two and three-piece can
production applications.
Our single and dual-probe double
sheet detectors are industry stand-
ards for steel can and end fabrica-
tion, and our new Fluximity single
probe system is uniquely suited for
detecting double steel ends on a
magnetic conveyor belt.
Prime Controls double shell and missing tab detectors
can be found on most easy-open end conversion systems
around the world. Our other products for can making
include high output LED light sources for can and end leak
detectors, as well as high sensitivity transducers and controls
for air leak detectors.
Our exciting new TestAlert system updates older air leak
tester machines with higher test accuracy and many more
control and reporting capabilities. It features a touch screen
control and graphical interface that shows test results in PSI
for each pocket, and tracks the results to predict trends and
impending maintenance issues.
P.76-PRIMECONTROLS-SP 2011√.indd 54 7/9/11 12:11:29
Supplier Profi le
Roeslein & Associates, Inc.
9200 Watson Road, Suite 200St. Louis, Missouri 63126-1528, USATel: +1 314 729 0055Fax: +1 314 729 0070E-mail: [email protected]: www.roeslein.com
Key Personnel
CEORudi Roeslein
PresidentDave May
VP & CFOBrian Sneed
VP – OperationsRob Campbell
VP – Construction & EngineeringCharles Reneski
VP – EngineeringTerry Leebolt
VP Operations – DenverSteve Martin
Director – Business Development Ronald Ragan
Roeslein & Associates, Inc.
Company DescriptionRoeslein & Associates, Inc., headquartered in St.
Louis, Missouri, USA, provides a wide range of tech-
nical services and engineered products to the D&I
container manufacturing and filling industries.
Operating under the same ownership for over
twenty years, Roeslein has implemented over 80
new capital projects, including complete design
and integration of green field plants for the glo-
bal can manufacturers, production efficiency
modeling and upgrades, and metal conversion
projects.
Roeslein has provided technical support for the
ongoing operations of existing facilities through
training, technical audits, and long-term technol-
ogy and operations support contracts.
Roeslein Branch Offices & Manufacturing
Locations:
• Roeslein & Associates, Inc. –
Saint Louis, Missouri / Central Engineering Offices
• Roeslein & Associates, Inc. -
Denver, Colorado / Engineering Offices
• Roeslein & Associates, Ltd. -
Birmingham, England / Sales Office
• Integrated Manufacturing Technologies -
Red Bud, Illinois / Manufacturing Location
• Roeslein & Associates, Inc. -
Shanghai, China / Manufacturing Location
Products
Roeslein’s Consulting Services –
Initially used in the conceptual design and feasibil-
ity phases of projects, Roeslein’s consulting services
are also instrumental in the support of plant opera-
tions and training for facilities that are starting up
or already in a production mode. Services typically
include: capital budgeting, power audits, simula-
tion, process improvement studies and market
planning.
Equipment Manufactured –
• Coolant Filtration Systems
• Ultra Violet Bottom Coat Systems
• Process Automation, Data Management and
Line Control Systems
• Unitized and Modularized Process Systems
• Construction, Installation and Start-up
• Technical and Operational Management
Recent Developments
Celebrating twenty years of service to the D&I
industry under the same ownership, Roeslein &
Associates is proud to announce the opening of
Roeslein China operations.
Roeslein’s new state of the art engineering and
manufacturing facility (pictured below) com-
prises a brand new, 3000 square meter facility
located thirty minutes from the Shanghai Pudong
International Airport.
Roeslein’s ability to provide local engineer-
ing and manufacturing of their unitized/pre-
assembled project approach demonstrates
Roeslein’s continuing commitment to their
China and Pacific Rim customers. Two years
in the planning, Roeslein took occupancy
of the new facility on December 15th, 2010
to signify the beginning of Roeslein’s opera-
tions in China. A formal grand opening
ceremony took place in July 2011.
The new organization will be staffed with
local engineering resources and local
manufacturing resources augmented
by Roeslein staff from both the USA and
European offices to insure they maintain the
quality control and operational standards
which have contributed to Roeslein’s track
record of success implementing projects
globally for their valued customers.
77CanTech International September 2011
Roeslein Management pictured from Left: Brian Sneed,Vice-President & CFO; Ron Ragan, Director of Business Development; Ganwei Wu, China Business Unit Manager; Rob Campbell, Vice President - Operations
P.77 ROESLEIN SP 2011√.indd 45 7/9/11 12:12:52
Supplier Profile
September 2011 CanTech International 78
Sandvik Hard Materials
Company DescriptionSandvik offers a full range of tooling for two-piece bev-erage cans (including out-of-round cupper tooling and ceramic/carbide necker tooling) and is the only sup-plier with a fully-integrated manufacturing process from raw material to the finished tool, as well as capability to develop new materials like corrosion resistance and lightweight grades.
Quality managementsAs a fully-integrated supplier, we manage the full manufacturing life cycle of our products, from tungsten carbide raw material powder to finished tools assuring the best quality in every step of the production.
Increase customer productivitySandvik invests 4% of invoiced sales in R&D to optimise the productivity and profitability of each tooling appli-cation. As a result of this continuous effort, Sandvik leads the development and introduction of new carbide grades and other materials based on the analysis of the failure mode.
Sandvik Hard Materials
HeadquartersVilla Strand811 81 SandvikenSweden
Canning Europe, Asia & Middle EastPol. Ind. Roca C/ Verneda, s/n08107 Martorelles (Barcelona), SpainTel: +34 93 571 7500Fax: +34 93 571 7650
Canning Americas1600 Freeway BoulevardBrooklyn Center, MN 55430, USATel: +1 763 560 4600Fax: +1 763 560 4611E-mail: [email protected]: www.hardmaterials.sandvik.com
Innovative PartnershipAt Sandvik Hard Materials, we are committed to contin-uously bringing solutions to the can tooling industry. We believe in providing our customers customised solutions that not only help them overcome their challenges, but also help them reach their goals. We work closely with every one of our customers to fully understand their can tooling needs and help us develop the best solution.
Our industry expertise and market knowledge helps us further support the development of these solutions. Our product specialists have extensive backgrounds in the can tooling industry. Their knowledge gives us keen insight into the needs and current offerings of the market. This allows us to develop unique and localised solutions for our customers and the can tooling industry. It also means we can offer customised services, includ-ing engineering, tooling and consulting.
We also work in partnership with main coolant suppliers to ensure corrosion resistance of our carbide and with main can sensor suppliers to secure the best sensor compatibility with our tools.
Sandvik has sustainability high on the agenda and is offering to the can tooling industry a full service pro-gram for the recycling of customers’ used tools.
P.78-SANDVIK-SP 2011√.indd 84 7/9/11 12:14:41
Supplier Profi le
CanTech International September 2011 79
Schuler Pressen GmbH
About the Schuler GroupAs the technological and global market leader in metalforming, Schuler supplies
machines, production lines, dies, process know-how and services for the entire
metal-working industry. The company employs around 5,000 people and is repre-
sented by its own facilities and sales offices in 40 nations around the world.
The Schuler Group can trace its roots back to a locksmith shop founded by Louis
Schuler in 1839. The company has produced metal-working machines since 1852.
Schuler subsequently emerged as the international flagship company in the press
manufacturing industry.
Schuler’s product range for the packaging industryThe Schuler Group has installed around 2,500 lines for the global packaging
industry since the 1960s.
Beverage can productionSchuler offers complete cupping press systems from a single source for beverage
can manufacturers. The range is based on the DA 140 cupping press with a press
force of 140 metric tons for the production of two-piece beverage cans, which is
designed for maximum output performance. Schuler has developed a complete
production system tailored to this machine type, which includes a control system,
decoilers, feed units, lubrication units and cupping diesets. These cupping press
systems can be operated at speeds of up to 300 strokes per minute and thus
reach outputs of around 3,000 to 4,500 cans per minute.
“More and more of the world’s leading beverage can manufacturers are using
Schuler cupping systems. The market has been impressed by their high degree of
reliability, precision and performance, based on innovative technology.”
Aerosol can productionSchuler offers the XS-series. These are impact extrusion presses with press forces of
150 to 400 metric tons for the production of aerosol cans. The X-250S for aerosol
cans with diameters of up to 59 millimeters is a high-tech line capable of oper-
ating at 240 strokes per minute – a speed which until now was still regarded as
unachievable.
NewsIn spring 2011, Schuler launched the Schuler ICON V-DRIVE which delivers a new
and revolutionary machine design with production advantages for manufactur-
ers of aerosol cans and aluminium beverage bottles.
The ICON V-DRIVE is a vertical machine for the forming of can bodies (body-
maker) which boasts compact dimensions, extremely low material consumption
and the possibility to process recycled materials. It generates up to 40% more
material savings than extruded cans. The intelligent design and efficient drive
system mean the machine only uses energy where it’s really needed. Recyclable
aluminium alloy has replaced pure aluminium as the raw material.
Schuler ICON V-DRIVE is perfectly suited for the use of drawing and ironing dies
with a maximum height of 290 mm and a maximum can diameter of 74 mm. The
prototype will be installed shortly at the production plant of a German aerosol
can manufacturer.
www.schulergroup.comJoin the Revolution
Could a cupper and bodymaker be combined to make a space-
saving drawing and ironing press? How could raw materials for
aerosol can production be reduced by up to 40 %? What if the
starting material was not a coil, but a circular blank?
Have you ever asked yourself these questions?
We’ve found the answer – and the new Schuler ICON V-DRIVE will
be presented in Goeppingen to our customers soon. Want to know
more? Please contact us: + 49 7161 66 548
Schuler ICON V-DRIVEThe vertical bodymaker
10_183_RZ_Anzeige_92x223.indd 1 30.08.11 18:53
Schuler Pressen GmbH
Bahnhofstr. 41, 73033 Göppingen,GermanyTel: +49 71 61 66548 Fax: +49 71 61 66659 E-mail: [email protected]
More NewsThe Schuler Group’s range of prod-ucts for the packaging industry isrounded out by Schuler’s Swiss sub-sidiary Beutler Nova for forming alu-minium and tinplate. Applications include innovative capsule systems used for coffee and other hot bev-erages or light metal containers for food and pet meals.
P.79-Schuler SP 2011√.indd 85 7/9/11 12:29:53
Supplier Profi le
September 2011 CanTech International 80
Seven-Ogun International
670 Lakeview Plaza BlvdSte KWorthingtonOH, 43085 USTel: +1 614 888 8939Fax: +1 614 888 8938E-mail: [email protected]: www.sevenogun.com
Key Personnel
VP OperationsFernanda Aler
Seven-Ogun International
Company DescriptionWFB Brazil has offices in Sao Paulo and Bauru, Brazil
while Seven-Ogun International has its office and
warehouse located in Columbus, Ohio. We are a
family business and we have been in the plate
and blanket market for over 17 years. Our com-
panies employ seven engineers and technicians
and 12 other representatives located throughout
the world.
ExpertiseFor almost 20 years, we have dealt exclusively in the blanket and plate industry and our team attends dozens of trade shows, seminars and workshops each year to ensure we are at the cutting edge of technology and service when it comes to this industry.
Inventory ManagementWe believe this is where we really separate our-
selves from our competitors. Seven-Ogun custom-
ises an inventory management system for each
and every client. This means that we actually
stock up to three months of inventory for each of
our clients at our warehouse depending on the
needs of such client. This means your company
can respond in DAYS versus MONTHS to additional
inventory requests.
Customer ServiceOne of the biggest differences between Seven
and our larger competitors is RED TAPE. They have
it, we don’t. When you call in you deal directly with
the manager if you have questions, concerns or
issues and we are available to our clients 24/7. Our
engineers and technicians are also available 24/7
and will travel to sites all over the world to address
your immediate needs.
We sincerely view ourselves as a service provider
which also happens to sell great products. We
have also recently implemented a new program
where we send out technicians and engineers to
train our clients’ employees, if requested, when it
comes to new products or equipment.
Our team at Seven believe that we can offer
superior customer services, expertise and products
compared to the competition.
OGUN
Seven-Ogun International, LLC
Photopolymer Printing Plates
Printing Blankets
Pre-press equiptments/services
BOUTIQUE SERVICE QUALITY WITH LARGE OPERATION CAPABILITIES
www.sevenogun.com
Seven-Ogun International670 Lakeview Plaza Blvd · Suite K
Worthington, Ohio 43085
t 614 888 8939 · f 614 888 8938 [email protected]
P.80-Seven Ogun-SP 2011√.indd 86 7/9/11 12:21:27
Supplier Profile
CanTech International September 2011 81
Shin-I Machinery Works Co Ltd
43 Chung Cheng St. Chingshui Taicung Taiwan R.O.C.Tel: +886 4 2623 8181 Fax: +886 4 2623 2129E-mail: [email protected] Web: www.shinican.com
Key Personnel
PresidentH.H.Lin
Vice President SalesKevin Lin
Sales ManagerLarry Hsu
Company Description
Shin-I Machinery Works Co Ltd, established in 1956
specialises in manufacturing of tin can making, food
canning machines, twist-off cap and PT cap making
machinery. Products have been exported to over
75 countries worldwide. With precise various CNC
machine tools and facilities, Shin-I with 300 skilled
employees can absolutely control the quality of all
parts and master the quality of machine products.
Shin-I keeps developing new products and state-of-
the-art techniques aggressively to satisfy international
customers’ requirements. Besides, new machine tools
and inspection device purchasing is always under
evaluation.
Main Products1. Complete line tin can making machinery for food,
beverage, aerosol, DRD, paint, milk powder and
other cans.
Shin-I Machinery Works Co Ltd
2. Food canning machinery including vacuum
seamer, liquid filler etc.
3. Twist off cap, PT cap production line.
4. Aerosol cone/dome forming and lining
machines.
5. Punch dies for end and two-piece cans and
other toolings for can industry.
New Developments
1. Multiple dies CNC sheet feed press for end and
two-piece cans.
2. Four stations in one combination machine for
aerosol can body.
3. High-speed multiple guns rotary lining machine.
4. Transfer press for aerosol top end.
5. Multiple dies two rows CNC sheet feed press
for end.
✓Suitable for harder and thinner tinplate
✓Digital ruler for can height adjustment
✓Best choice for aerosol can making
✓Recyclable central control lubricating system
✓ Up to 400CPM
✓Twin separating knives on each end magazine
✓Variable speed control on turning spindle SHIN-I MACHINERY WORKS CO.,LTD Taiwan
Automatic Vertical Spin Flow Necker, Flanger with Twin Seamers
www.shinican.comSHINCAN halfv2.indd 1 11/7/11 12:00:14
P.81-SHIN I-SP 2011√.indd 87 7/9/11 12:25:23
Soudronic AG Industriestrasse 35 8962 Bergdietikon Phone + 41 44 743 66 66 [email protected] Switzerland
TECHNOLOGY THAT KEEPS YOU AHEAD.
The kingfisher is coming back: a sure sign that in some parts of the world at least the ecological
balance is improving. One reason is the contribution made by the metal packaging industry.
Downgauging has radically reduced can weight and the raw material requirement. Infinite-loop
recycling means lower use of resources and even lower energy consumption. Together, these factors
reduce our carbon footprint and make cans a genuinely eco-friendly form of packaging. So no one
can say to us: «Go tell it to the birds».
A sight that meanswe’re getting it right
Soudronic_Ad_CanTech_SeptOct_CanTech Full Bleed 231 x 306 mm 23.08.2011 10:23 Seite 1
Supplier Profile
CanTech International September 2011 83
Technology that keeps you ahead
SOUDRONIC AG
Industriestrasse 35CH-8962 BergdietikonSwitzerlandPhone +41 44 743 66 66Fax +41 44 743 66 [email protected]
Key Personnel
CEOJakob Guyer
CFORocco Statunato
COOPeter Schreiber
Soudronic
Cantec
Cepak
Ocsam
Sabatier
Soudronic is the undisputed technology and market leader for canbody welders
worldwide. Its installed welder base of over 5.000 systems is producing over
90 per cent of the total world production of three-piece cans.
Founded in 1953, Soudronic’s headquarters are located in Bergdietikon, Switzer-
land. Today, the company employs a staff of around 550 people in its develop-
ment and production facilities all over the world. The company’s sales and service
network covers more than 120 countries, reflecting a large and globally diverse
customer base.
Together with its group companies, Soudronic is also the benchmark for com-
plete production systems for two- and three-piece canmaking, endmaking, lines
for industrial packaging and systems for the production of peel-off ends.
For some years now Soudronic has championed the claim of steel tinplate to
be one of the most economical, environment-friendly and sustainable forms
of packaging available to manufacturers today. And there is no shortage of
reasons.
First and foremost is the fact that metal cans today require far less raw ma-
terial than in the past. Soudronic leads the way in the development of the ad-
vanced canmaking machines needed to work with downgauged tinplate, i.e.
sheet metal stock of as little as 0.01 mm in thickness. Lighter cans mean
more containers per ton of tinplate, savings on natural resources and, over-
all, a significant reduction in the world’s carbon emissions footprint.
At Soudronic, we believe the canmaking industry has a responsibility to en-
lighten consumers about the largely unperceived ecological benefits of our
products. If this helps to change consumer perceptions about metal packag-
ing – and push up recycling rates still further – we will already have taken a
major step forward.
P.83-SOUDRONIC-SP 2011√.indd 89 7/9/11 12:33:35
Supplier Profi le
September 2011 CanTech International 84
Sprimag
Company DescriptionSprimag Spritzmaschinenbau GmbH & Co KG is one of the world’s leading manufacturers of:• Internal coating and outside bottom coat-ing machines for two-piece steel and aluminium beverage cans• Internal coating and drying plants for three-piece steel cans• Internal coating and drying plants for alumini-um monobloc aerosol cans as well as aluminium bottles• Annealing, internal coating, drying and latexing plants for collapsible tubes.
In addition to machinery for the packaging industry, Sprimag also manufactures surface coating equip-ment for mass-produced parts made of metal, plastics, rubber, wood, glass etc. Capabilities range from supply and commissioning of stand-alone machines to complete coating banks in various sizes and capacities.The Quality Management System is certified through ISO 9001 and VDA 6.4 as well as the Environmental Management System through ISO 14001.
Sprimag Spritzmaschinenbau GmbH & Co KGHenriettenstrasse 90D-73230 Kirchheim/TeckGermanyTel: +49 7021 5790Fax: +49 7021 579 107E-mail: [email protected]: www.sprimag.de
Key Personnel
Managing DirectorsMichael AngerPhilippe Nollet
Sales Manager Beverage CansMatthias Allar
Sales Manager Aerosol Cans, Aluminium TubesJoachim Baumann
FacilitiesSprimag is located in Kirchheim/Teck, approxi-mately 15 minutes by car from Stuttgart airport at the Autobahn Stuttgart-Munich.
StatisticsOtto Heinrich, who gained patents for a ‘Spraying device with hand handle’ in 1906, founded the company in Leipzig on 31 July 1925. Sprimag moved to Kirchheim/Teck in 1949 and has expand-ed steadily since then. Today, it employs 150 peo-ple and annual turnover is around €24 million.
ServicesSprimag believes that innovative technologyis the key to positve partnerships. The company’scustomers can draw upon its extensive experience of spraying, to find solutionsto specific technical problems. Do you have a new idea for your company’s products? Do you need to increase the productivity of a production line? Do you need technical assistance? If you do, contact Sprimag, who are at your service worldwide.
Internal coating of bottles and cans?
www.sprimag.com
P.84-SPRIMAG-SP 2011√.indd 90 7/9/11 12:36:27
Supplier Profi le
CanTech International September 2011 85
Stolle Machinery Company LLC
6949 S. Potomac StreetCentennial, CO 80112-4036USA
Tel: +1 303 708 9044Fax: +1 303 708 9045E-mail: [email protected]: www.stollemachinery.com
Stolle Machinery Company LLC
Company DescriptionStolle is the world’s leading supplier of two-piece can and end-making machinery for the global can making industry. In addition to supplying indi-vidual machines, Stolle designs, installs and supports complete can and end lines for beverage and food cans. Stolle supports their large installed base of machinery with the highest quality OEM parts and responsive serv-ice, as well as a continuing stream of product upgrades and innovations. In addition to can machinery, Stolle serves the food processing industry by building customised container filling machines.
Global OperationsStolle has three major manufacturing and assembly centers in the US as well as their Global Parts and Service headquarters and North American Distribution Center. Stolle also has a full ISO-9001 manufacturing center in Indaiatuba, Brazil, with other glo-bal manufacturing centers coming fully online in 2012. The Stolle Systems Group is headquartered in Carlisle, England, which is also the location of Stolle’s European Parts and Service distribution facility.
ProductsStolle Machinery offers nearly every value-added piece of equipment available, including products formerly made by Alcoa, Borden, Can Industry Products (CIP), Formatec, Omnitech, Preferred, Ragsdale, Randolph, Redicon, Reynolds, Rutherford, Standun and Stolle.
Brand PromotionStolle products and services allow can makers to promote their customers’ brands by producing the highest qual-ity cans efficiently and economically – and do it reliably millions of times every day. To meet the growing demand for unique packaging solutions, our machines and services are at work in our customers’ plants around the world producing the best cans and ends at near impossible speeds. And Stolle’s commitment to superior cus-tomer support and creative solutions positions them to continue this tradi-tion long into the future.
P.85-SP-Stolle 2011√.indd 91 7/9/11 12:37:40
Supplier Profile
September 2011 CanTech International 86
T D Wright, Inc
292 Walnut StreetSt Paul MN 55102USATel: +1 651 227 1302Fax: +1 651 227 4465 E-mail: [email protected]: www.magneticcylinders.com
PresidentDavid McEachern
T D Wright
Company DescriptionSetting the standard for innovative plate cylinder
design in the metal decorating industry, T D Wright
continues to invest in state of the art technology,
process control, and CNC machine tools in order
to bring customers the best products and service
possible.
NewsLow maintenance, fast label changes, and
improved repeatability are the hallmarks of the
ENOC system. Hundreds of inkers have been
successfully converted to the ENOC system as it
continues to adapt to current production needs.
For example, new developments include the intro-
duction of heavy duty 24 and 32 oz versions.
ProductsTDW has developed a full line of precision plate
cylinder assemblies and related accessories for the
Rutherford, Concord, and other metal decorat-
ing machines. Its objective is to meet customers’
needs for products that provide improved graphics
at lower cost. Examples of these products include:
the ENOC System, modular magnetic lightweight
Concord cylinders, modular magnetic lightweight
Rutherford cylinders, modular clamp cylinders,
ENOC clamp cylinders, lightweight modular mag-
netic cylinders for Computer-To-Plate units, and
accessories.
P.86-TD Wright-SP 2011√.indd 92 7/9/11 12:38:42
Supplier Profile
CanTech International September 2011
Trac Measurement Systems
87
Trac Measurement Systems
Nedge Hill Science ParkTelfordTF3 3AJUK
Tel: +44 (0) 1952 210020Fax: +44 (0) 1952 299894Email: [email protected]: www.tms.trac-group.com
Trac Americas Inc700 Corporate CircleSuite MGoldenColorado80401USA
Tel: +1 303 384 0279Fax: +1 303 279 7551E-mail: [email protected]: www.tms.trac-group.com
Key Contacts
General Manager – SalesDaniel Pettitt
Project Contracts EngineerDarren Hawkings
USA Regional Managing Director/ Customer Support EngineerGreg Schultz
Company DescriptionTrac Inspection Systems are used extensively within the metal pack-
aging industry for dimensional and destructive testing of two-piece
food and beverage cans. Our systems offer a flexible and modular
approach to virtually all of today’s metal packaging inspection
requirements. Using specialised contact transducers, laser and
optical technologies, the range of automated can inspection
systems from TMS offer an outstanding price/performance ratio
and easily justified ROI. Our automatic inspection systems can be
line-fed or batch loaded through our multi-lane In-feed conveyor
systems. Using our state-of-the-art Microsoft Windows compliant
GaugeXplorer software, data acquisition and distribution is made
easy through local and wide area networks.
ProductsTwo-piece beer/beverage can inspection
Z301 Universal gauge
Z301 Front end gauge
Z302 Back end gauge
Z311 Punch gauge
Z313 Enamel rater
Z314 Semi automatic wall thickness analyser
Z338 Manual front end trimmed can gauge
Z339 Reform scanner
Z340 Automatic coating analyser
Z341 Manual coating analyser
Food can inspection
Z304 Two-piece food can gauge
Shells/Ends inspection
Z401 Shell Inspection
Z601 Automatic progression gauge
Z603 Tabulator
Recent InnovationThe Z340 Automatic Coating
Analyser & Z341 Bench Top
Manual Internal Coating
Analyser both offer optical
inspection of the critical
internal and external coat-
ings found in today’s beverage and food cans. The Z340 automat-
ic gauge can be fitted with a variety of options including; LSM /ISG
recognition camera for “colour- spray dot” identification ensuring
SPC data is tagged with the relevant traceability.
The Z301 Front End and Z302 Back End Gauges may also be fit-
ted with the following gauge options; body maker I.D recognition
cameras (for in-line variant) and axial load and dome reversal /
growth stations for destructive testing. A scanning reform tooling
option is also available for plants reforming light weight aluminum
cans giving detailed analysis of the internally reformed diameter
and height.
An optional grain alignment system can now be supplied for our
automatic shell inspection systems further enhancing the systems
capability.
ServiceAt Trac, we believe our job isn’t
finished until you can do your job
better. We do that by supplying
the highest-quality products possi-
ble, and then backing them up with
service and support dedicated to
meeting your needs.
Trac Measurement Systems offers a
comprehensive customer service
facility from a dedicated techni-
cal support and administration team
based at our Telford UK office plus a
number of global customer service
partners based at strategic loca-
tions.
P.87 TRAC SP2011√.indd 93 7/9/11 12:42:13
Supplier Profile
September 2011 CanTech International 88
Versatile Technology
Versatile Technology P/LHeadquarters 35 Cleeland RoadOakleigh South, Victoria, 3167AustraliaTel: +61 3 9548 8983Fax: +61 3 9548 8958E-mail: [email protected]: www.versatiletechnology.com.au
Key Personnel
UK/EuropeTim BulmanTel: +44 7 5304 65680E-mail: [email protected]
North AmericaRegal Metrology IncBrian RohlederTel: +1 502 968 7993E-mail: [email protected]
ChinaGuangzhou Stolle-Denuo Machinery Co, LtdFenny GongTel: +86 20 34789252E-mail: [email protected]
Company Description
Versatile Technology manufactures a wide
range of test and measurement equipment
for the metal packaging industry. Having
been a key supplier for over 20 years we
are well known throughout the world for our
technical innovation, reliable build quality,
world class GR&R performance and com-
petitive pricing. Of course we are also very
happy to tailor equipment to your exact
needs. Our equipment range is extensive,
covering most semi-automatic and auto-
matic needs. Please call or visit our website
for more details.
Our complete range of bench top gauges
such as the pictured JC010B Axial Load
Gauge are now fitted with our proprietary
ME262 Microprocessor providing real-time
graphing, alpha-numeric keypad, data
tabulation, colour out of specification toler-
ances, custom test-mode library, advance
diagnostics, network data port and USB serv-
ice port that allows easy program updates,
back-up/restore of settings and data log-
ging capture for use in programs such as
Microsoft Excel.
P.88 VERSATILETECH 2011√.indd 94 7/9/11 12:43:24
Supplier Profi le
CanTech International September 2011 89
Wallram
WALLRAM GROUPHerborner Strasse 45, D-35745 Herborn, GermanyISO Certification 9001:2008E-mail: [email protected]: www.wallram.com
Plant Essen:WALLRAM Werkzeugtechnik GmbHSchuermannstrasse 40, D-45136 Essen, GermanyTel: +49 201 89 636 0 Fax: +49 201 89 636 30E-mail: [email protected]
Plant Krakow:WALLRAM CanToolEurope S.p.z o.o.Ul. Spokojna 10PL-32-080 Zabierzów, Kraków, PolandTel/Fax: +48 1228 53828E-mail: [email protected]
Plant BresciaLIZZINI - WALLRAM Grindtec SrlVia Leonino da Zara, 54, 25018 Montichiari - BS, ItalyTel: +39 030 967 2582 Fax: +39 030 967 2983E-mail: [email protected]: www.lizzini.it
The CompanyWALLRAM provides high precision tools and
wear parts made of sintered metal carbides,
ceramics and tool steel.
WALLRAM is known for its innovative and qual-
ity-orientated products since the founders of the
company filed their first patent for sintered
carbides in 1914.
We have been supplying the metal packaging
industry for decades. The principle of our busi-
ness is to develop a long-term relationship with
our customers by providing top quality products
coupled with support from concept to imple-
mentation.
The BenefitWith our high quality products, produced on
specially developed grinding machines, we
achieve long tool life, which decreases the
operation costs and supports sustainable
production.
We are also offering cost-savings with qualified
refurbishment of tooling.
Our ProductsWe offer the full range of products for cupper,
bodymaker and necker and any other tooling
which is needed for can making production.
We offer tailor-made tooling based on your
process needs. With our expertise in complete
tool design and processing we work with our
customers to provide improved performance
– for example choosing the correct carbide
binder or ceramic type based on application
requirements.
Wallram GroupThe WALLRAM Group is specialized for hard
material applications offering products and
service for different business areas.
Our main focus is on the metal packaging
industry with the production sites of Wallram in
Germany and Poland, LPT in the USA and LIZZINI
(Precision Grinding Machines) in Italy.
P.89 WALLRAM SP 2011√.indd 95 7/9/11 12:44:51
November/December 2010 CanTech International
360º Powder Coating for Aerosol Cans and Tubes
Frei AGHofenstrasse 18CH-9300 WittenbachSwitzerlandTel: +41 71 292 3434Fax: +41 71 292 3400E-mail: [email protected]: www.frei-ag.com
Aerosol Manufacturing Equipment
Germann + Frei AGMartinsbruggstrasse 92CH-9016 St. Gallen, SwitzerlandTel: +41 71 282 16 40Fax: +41 71 282 16 50E-mail: [email protected]: www.germannfrei.ch
Lanico Maschinenbau Otto Niemsch GmbHPO Box 3065D-38020 Braunschweig, GermanyTel: +49 531 809 060Fax: +49 531 809 0627E-mail: [email protected]: www.lanico.de
Shin-I Machinery Works Co Ltd No 43 Chung Cheng St Chingshui Taichung, Taiwan ROC Tel: +886 4 2623 8181 Fax: +886 4 2623 2129 E-mail: [email protected] Web: www.shinican.com Anilox Cleaning Systems
Flexo Concepts100 Armstrong Rd, Suite 103PlymouthMA 02360, USATel: +1 508 830 9506Fax: +1508 830 0277E-mail: [email protected]: www.flexoconcepts.com
Anilox Coating Systems
Anilox Metering TechnologyUnit NM10, The New Mill,George Street, MilnsbridgeHuddersfieldHD3 4JD, UKTel: +44 1484 652 680Fax: + 44 1484 652 228E-mails: [email protected] [email protected] [email protected]: www.aniloxmt.com
ANILOX SUPPLIES/ ANILOX WORLDWIDE
Sole Suppliers of Hayneswood Coating SystemsAmericas and AsiaSteve [email protected]: +1 831 464 3445 Fax +1-831 464 3445UK and EuropeDeborah [email protected]: +44 161 620 5337 Fax +44 161 621 5974
Bailing Machines
Sargiani SpAVia Farnesiana 8429100 PiacenzaItalyTel: +39 0523 615 250Fax: +39 0523 593 938E-mail: [email protected]: www.sargiani.com
Base Reforming Machines
Belvac Production Machinery Inc237 Graves Mill Road LynchburgVA 24502-4203USATel: +1 434 239 0358Fax: +1 434 239 1964E-mail: [email protected]: www.belvac.com
CarnaudMetalbox Engineering plcDockfield RoadShipleyWest Yorkshire BD17 7AY, UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com
Beading Units
CarnaudMetalbox Engineering plcDockfield Road, ShipleyWest Yorkshire BD17 7AY, UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com
Germann + Frei AGMartinsbruggstrasse 92CH-9016 St. GallenSwitzerlandTel: +41 71 282 16 40Fax: +41 71 282 16 50E-mail: [email protected]: www.germannfrei.ch
Ruey I Machinery Co Ltd No 173 Sec 1 Kong Pu RoadWu Chi DistrictTaichung 435Taiwan Tel: +886 4 2639 7261-2 Fax: +886 4 2639 7263E-mail: [email protected] Web: www.rueyi.com.tw
Body Makers D+I
CarnaudMetalbox Engineering plcDockfield Road, ShipleyW Yorkshire BD17 7AY, UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com
OKL Can Line Inc11235 Sebring DriveCincinnatiOH 45240, USATel: +1 513 825 1655Fax: +1 513 825 1948E-mail: [email protected]: www.oklcan.com
Bodymaker Spares & Repairs
OKL Can Line Inc11235 Sebring DriveCincinnatiOH 45240, USATel: +1 513 825 1655Fax: +1 513 825 1948E-mail: [email protected]: www.oklcan.com
Can Conveyors/Conveying
Arrowhead Systems, Inc.Arrowhead/Busse/SJI Corporation124 N Columbus StreetRandolph, WI 53956, USATel: +1 920 326 3131Fax: +1 866 580 3212E-mail: [email protected]: www.arrowheadsystems.com
Codi Manufacturing Inc.14352 W 44th AvenueGoldenCO 80401, USATel: +1 303 277 1542Fax: +1 303 271 3894E-mail: [email protected]: www.codimfg.com
FleetwoodGoldcoWyard1305 Lakeview DriveRomeovilleIL 60446 , USATel: +1 630 759 6800Fax: +1 630 759 2299E-mail: [email protected]: www.fgwa.com
September 2011 CanTech International 90
To advertise, contact Victoria Deakins on +44 1474 532202. Fax: +44 1474 532203
Email: [email protected] guide
P.90-105 BUYERS GUIDE SEPT11.indd 90 9/9/11 11:09:06
CanTech International September 2011 91
To advertise, contact Victoria Deakins on +44 1474 532202. Fax: +44 1474 532203Email: [email protected] Buyers guide
XETERA (Thailand) Co Ltd1/8, TFD Industrial Estate, Moo 5Tambon Thasa-anAmphur, Bang Pakong,Chacheongsao Province 24130Thailand Tel: +66 38 578 512-4Fax: +66 38 578 520E-mail: [email protected]
Can Decorating Equipment
Intercan Group Ltd38 Burners Lane, Kiln Farm, Milton Keynes , MK11 3HB, UKTel: +44 1908 270041Fax: +44 1908 270043E-mail: [email protected]: www.intercan.co.uk
Can & Double Seam Testing Equipment
CMC-KUHNKE, Inc1060 Broadway, AlbanyNY 12204, USATel: +1 518 694 3310Fax: +1 518 694 3311E-mail: [email protected]: www.cmc-kuhnke.comCMC-KUHNKE, GmbHColditzstr. 34-36, Bau 18D-12099 Berlin, GermanyTel: +49 30 2300 660Fax: +49 30 2300 6666E-mail: [email protected]: www.cmc-kuhnke.com
Can End Dies
Amador Varas SAc/Montalegre 3208915 Badalona, Barcelona, SpainTel: +34 933 952 954Fax: +34 933 954 904E-mail: [email protected]: www.amador-varas.com
Apex Tool Works Inc3200 Tollview DriveRolling Meadows, IL 60008, USATel: +1 847 394 5810Fax: +1 847 394 2739E-mail: [email protected]: www.apextool.com
Can Line Control Systems
KON-TEK Automation405 Street N:8 PınarbaiIzmir, TurkeyTel: +90 232 479 10 10 pbxFax: +90 232 479 91 91E-mail: [email protected]: www.kontekotomasyon.com.tr
Roeslein & Associates Inc9200 Watson Road, Suite 200St Louis, MO 63126-1528, USATel: +1 314 729 0055Fax: +1 314 729 0070E-mail: [email protected]: www.roeslein.com
Can Making Machines and Complete Lines
Lin Der Sheng Can Making Machinery
Co LtdNo.135, Puu-ne street, Yen-her LiChang Hua City, Taiwan, ROCTel: +886 4 7118143Fax: +886 4 7116487Web: http:/can-making.comE-mail: [email protected]
Sargiani SpAVia Farnesiana 8429100 Piacenza, ItalyTel: +39 0523 615 250Fax: +39 0523 593 938E-mail: [email protected]: www.sargiani.com
Shin-I Machinery Works Co Ltd No 43 Chung Cheng St Chingshui , TaichungTaiwan ROC Tel: +886 4 2623 8181 Fax: +886 4 2623 2129 E-mail: [email protected] Web: www.shinican.com
Soudronic AGIndustriestrasse 35CH-8962 BergdietikonSwitzerlandTel: +41 44 743 66 66 Fax: +41 44 743 66 99E-mail: [email protected]: www.soudronic.com
Stuurman BVPO Box 35 1520 AA WormerveerThe NetherlandsTel: +31 75 6283551Fax: +31 75 6286037E-mail: [email protected]: www.stuurmanbv.com
SWISSCAN NetworkMuelisacker 221CH-5705 HallwilSwitzerlandTel: +41 62 777 44 40Fax: +41 62 777 44 41E-mail: [email protected]: www.swisscan.net
Can Seamer Manufacturer
Varin Food Machinery Co Ltd57/22 Moo 5, Soi Thamsiri,Bangna-Trad Rd KM 26 T BangsaothongA Bangsaothong, Samutprakarn 10540ThailandTel: +662 708 5522Fax: +662 708 5528E-mail: [email protected]: www.varinfood.com
Can Testing Equipment
BA.SCO srlVia Borgognone 910090 Trana (Torino)ItalyTel: +39 0119 33620Fax: +39 0119 355 763E-mail: [email protected]: www.basco-testers.com
Bonfiglioli Engineering SpAVia Rondona 3344049 Vigarano PieveFerrara, ItalyTel: +39 0532 715 631Fax: +39 0532 715 625E-mail: [email protected]: www.bonfiglioliengineering.com
CMC-KUHNKE, Inc1060 BroadwayAlbany, NY 12204, USATel: +1 518 694 3310Fax: +1 518 694 3311E-mail: [email protected]: www.cmc-kuhnke.com
CMC-KUHNKE, GmbHColditzstr. 34-36, Bau 18D-12099 Berlin, GermanyTel: +49 30 2300 660Fax: +49 30 2300 6666E-mail: [email protected]: www.cmc-kuhnke.com
InnoScan K/SSødalsparken 118220 Brabrand, DenmarkTel +45 86 26 5677Fax +45 86 26 5678E-mail: [email protected]: www.innoscan.dk
SenconNORTH, CENTRAL & SOUTH AMERICA6385 W 74th StreetBedford ParkIL 60638, USATel: +1 708 496 3100Fax: +1 708 496 3105E-mail: [email protected]: www.sencon.comEUROPE – MIDDLE EAST – ASIAStonebridge Cross Business ParkDroitwich Spa, WR9 0LW, UKTel: +44 1905 827800Fax: +44 1905 795876E-mail: [email protected] – SPAIN – GERMANYFrance, Tél: +33 176 641 287España, Tél: +34 937 549 526 Deutschland. Tel: +49 30 87333 3807 Fax: +44 1905 795876 E-mail: [email protected]
P.90-105 BUYERS GUIDE SEPT11.indd 91 9/9/11 11:09:16
November/December 2010 CanTech International
To advertise, contact Mark Woods on +44 1474 532202. Fax: +44 1474 532203
Email: [email protected] guide
September 2011 CanTech International 92
To advertise, contact Victoria Deakins on +44 1474 532202. Fax: +44 1474 532203
Email: [email protected] guide Can Testing Equipment
Trac Measurement Systems LimitedTrac House, Nedge Hill Science ParkTelford TF3 3AJ, UKTel: +44 1952 210020Fax: +44 1952 299804Email: [email protected]: www.trac-group.com
Versatile Technology2 Industrial AvenueNotting HillVictoria 3168, AustraliaTel: +61 3 9548 8983Fax: +61 3 9548 8958E-mail: [email protected]: www.versatiletechnology.com.au
Wilco AGRigackerstr 11CH-5610 Wohlen, SwitzerlandTel: + 41 56 618 4343Fax: +41 56 618 4344E-mail: [email protected]: www.wilco.com
Can Tooling Services
Seal Precision Co Ltd57/33 Moo 5, Soi ThamsiriBangna-Trad Rd KM 26, T BangsaothongA Bangsaothong, Samutprakarn 10540, ThailandTel: +662 708 5585Fax: +662 708 5755E-mail: [email protected]: www.varinfood.com
Can Trimmers
Belvac Production Machinery Inc237 Graves Mill Road Lynchburg, VA 24502-4203, USATel: +1 434 239 0358Fax: +1 434 239 1964E-mail: [email protected]: www.belvac.com
CarnaudMetalbox Engineering plcDockfield RoadShipley, West Yorkshire BD17 7AY, UKTel: +44 1274 846 200Fax: +44 1274 846 201E-mail: [email protected]: www.canlinespares.com
Can Washer Holdown Mats & Belts
Ashworth Bros, Inc 450 Armour DaleWinchester, VA 22601, USA Tel: +1 540 662 3494Fax: +1 540 662 3150E-mail: [email protected]: www.ashworth.com
Can Washers/Ovens
Worldwide Headquarters:International Thermal Systems LLC4697 W Greenfield AvenueMilwaukee, WI 53214, USATel: +1 414 672 7700Fax: +1 414 672 8800E-mail: [email protected] Web: www.itsllcusa.comEuropean Office:International Thermal Systems Ltd11 Ham Common, RichmondLondon TW10 7JB, UKTel: +44 7900 191 352E-mail: [email protected] Office:ITS Industrial Thermal Equipment Co LtdTel: +86 21 6774 1033Fax
Top Related