C104
1/3rd A4 brochure holderOpening dimension 104mm x 32mm
2C112
Double DL & 1/3rd A4brochure holder
Opening dimension 112mm x 32mm x 2
2C110
2 compartment DL 1/3rd A4high back brochure holder
deep pocket (240mm)
Opening dimension 110mm x 45mm x 2
3C104
3 compartment 1/3rd A4brochure holder
(also for wall mounting)Opening dimension 104mm x 32mm x 3
3C110H
3 compartment DL 1/3rd
A4 counter standing(also for wall mounting)
Opening dimension 110mm x 32mm x 3
1/3
A4 S
IZE
STAN
DS
CL230
1/3rd A4 landscapebrochure holder
Opening dimension 230mm x 32mm
4C104
4 compartment 1/3rd A4brochure holder
Opening dimension 104mm x 32mm x 4
FP110
1/3rd Flat Pack brochure holderOpening dimension 110mm x 32mm. Comes flat and clips together easily to make a counter stand.
C160
A5 brochure holderOpening dimension 160mm x 32mm
2C160
2 compartment A5 deep pockets
(also for wall mounting)Opening dimension 160mm x 45mm x 2
2C155H
2 compartment A5counter standing
(also for wall mounting)Opening dimension 160mm x 32mm x 2
3C160
3 compartment A5brochure holder
Opening dimension 160mm x 32mm x 3
4C160
4 compartment A5brochure holder
Opening dimension 160mm x 32mm x 4
A5 S
IZE
STAN
DS
C230
A4 brochure holderOpening dimension
230mm x 32mm
C330
Landscape A4 Counter standing
(also for wall mounting)Opening dimension
330mm x 32mm
3C230
3 compartment A4brochure holder
Opening dimension 230mm x 32mm x 3
4C230
4 compartment A4 brochure holder
(also for wall mounting)Opening dimension 230mm x 32mm x 4Optional dividers allow for conversation
to 8 pockets DL 1/3rd A4
Multi-Use 4C330
4 compartment A4 landscapebrochure holder
(also for wall mounting)Opening dimension 330mm x 32mm x 4Optional dividers allow for conversion
to pocket sizes A4, A5, 1/3rd A4
A4 S
IZE
STAN
DS
CC104
12 pocket 1⁄3 rd A4 Rotarythis unit is also available with the ad-dition of the optional CAP210 header
unit - item code is CC104H
CC230
6 pocket A4 Rotarythis unit is also available with the ad-dition of the optional CAP210 header
unit - item code is CC230H
CC160
6 pocket A5 Rotarythis unit is also available with the ad-dition of the optional CAP210 header
unit - item code is CC160H
CC104H, CC160H, CC230H
Choice of A4, A5 or 1/3rd A4 RotaryIncluding a centre pole
and header(Image shows CC104H)
12C230
12 pocket A4 desktop carouselOverall height: 550mm
Optional divider available to dividepockets into 1/3 A4 if required
LAZY
SUS
ANS
Counter Standing: S I N G L E , D U A L A N D M U LT I - C O M PA RT M E N T L E A F L E T H O L D E R S
BC93
Landscape businesscard holder
Opening dimension 93mm x 18mm
VBC56
Portrait businesscard holder
Opening dimension 56mm x 18mm
4BC93
4 compartment businesscard holder
Opening dimension 93mm x 18mm x 4
8BC93
8 compartment businesscard holder
Opening dimension 93mm x 18mm x 8
WBC93
Wall mounted landscapebusiness card holder
Opening dimension 93mm x 18mm
W104
1/3rd A4 brochure holderOpening dimension
104mm x 32mm
W110
DL & 1/3rd A4brochure holder
Opening dimension 110mm x 32mm
3W110H
3 compartment DL 1/3rd
A4 pocket side by sideOpening dimension 110mm x 32mm x 3
4W104
4 compartment 1/3rd A4brochure holder
Opening dimension 104mm x 32mm x 4
WL230
1/3rd A4 landscapebrochure holder
Opening dimension 230mm x 32mm
W230
A4 brochure holderOpening dimension
230mm x 32mm
W330
Landscape A4brochure holder
Opening Dimension330mm x 32mm
3W230
3 compartment A4stacked wall mount
brochure holderOpening dimension 230mm x 32mm x 3
W160
A5 brochure holderOpening dimension
160mm x 32mm
2W155H
2 compartment A5brochure holder
Opening dimension 160mm x 32mm x 2
W104-B/W110-B
DL & 1/3 A4 brochure holder(with angle bracket for
counter standing)W110 - Opening dimension 110mm x 32mmW104 - Opening dimension 104mm x 32mm
AB1
Free standing adaptor clip
Adapts to W104, W110, W160,W230, 4W104
W160-B
A5 brochure holder (with angle bracket for
counter standing)Opening dimension 160mm x 32mm
W230-B
A4 portrait style brochure holder
(with angle bracket forcounter standing)
Opening dimension 230mm x 32mm
4W104-B
4 compartment 1/3rd A4brochure holder
(with angle bracket for counter standing)
Opening dimension 104mm x 32mm x 4
Wall Mounted: S I N G L E , D U A L A N D M U LT I - C O M PA RT M E N T L E A F L E T H O L D E R S
Business Card Holders:
A 4 S I Z E WA L L H O L D E R S
1 / 3 A 4 S I Z E WA L L H O L D E R S
D U A L WA L L M O U N T E D - E A S I LY C O N V E RT E D T O C O U N T E R
A 5 S I Z E WA L L H O L D E R S
WS8-D8 WS16-D16
CD-1 DividerTo Divide A4 pocketsinto 1/3rd A4 pockets.Included with kitsWS16-D16, WS16-D8WS8-D8, WS8-D4
95 cm
64 cm
16 cmCLW Clip
All Wall Systems are simple to install with first row mounting onto a Wall Strip and subsequent rows
mounting onto previous holders. Diagram depicts WS16
32 compartment 1/3rd A4 wall systemOpening dimension 104mm x 32mm x 32
16 compartment 1/3rd A4 wall system
Opening dimension 104mm x 32mm x 16
1/3
A4 S
IZE
STAN
DS
WS9 WS18-95
18 compartment A5 wall systemOpening dimension 160mm x 32mm x 18
9 compartment A5 wall systemOpening dimension 160mm x 32mm x 9
A5 S
IZE
STAN
DS
WS8 WS16
16 compartment A4 wall systemOpening dimension 230mm x 32mm x 16
8 compartment A4 wall systemOpening dimension 230mm x 32mm x 8
A4 S
IZE
STAN
DS
WS8-D4 WS16-D8
24 compartment wall system8 x A4 pockets
16 x 1/3 A4 pockets
12 compartment wall system4 x A4 pockets
8 x 1/3 A4 pockets
COM
BINA
TION
SWall Systems:
Unique AdjustableA superbly innovative product allowing forinfinite flexibility in displaying literature
A product which can be set up tohold any size material, this systemhas the bonus that single piecescan be added as required, witheach additional module creatingan extra 3 pocket display at lessthan half the cost of a standardbrochure holder.
The unique system has been de-veloped for use in all types of lo-cations, especially where wallspace is limited.
Three versions have been developed:
3PAS - For use with our unique clip-on aluminium strip, AL95. Thissystem can turn whole walss into an adjustable display system whichcan be changed to accommodate any size of material - standard ornot - at any time. Cut aluminium strip to required length and screwto wall or display board through the holes provided.
3PSW - For use with slat wall displays; modules clip into standard slatand slide to required position.
3PFB - For gluing; ideal for permanent displays.
A5 brochures(1/2 letterhead)
A4 (letterhead) landscapebrochures
1/3 A4 (trifold)landscapebrochures
and so on...
Each additionalmodule provides 3
more pockets
3PAS-5
L100
1/3rd A4 informationholder (angled)(Shown with PVC top)
V100
1/3rd A4 information holder(Double-sided - shown with
PVC top)
M120
Small information holder(Supplied with PVC cover)to hold 135mm x 120mm
VAP210
A4 information holder(double-sided - portrait style)
210mm x 297mm
WAP210-B
A4 information holder(Single-sided - wall mounted)
WAP210-B (black frame), WAP210 -C(clear frame), WAP210-W (white frame)
M210
A4 information holder(Double-sided - supplied with PVC cover)
to hold material 297mm x 210mm
AP210
A4 ad-print holder (70 deg. angle)
(Single-sided - to hold material 297mm x 210mm
L210
A4 information holder (angled)
(Shown with PVC top)
LAP210
A4 information holder (double-sided - landscape style)
210mm x 297mm
M150
A5 information holder (Double-sided - supplied with PVC cover)
to hold 210mm x 150mm
V150
A5 information holder(Double-sided - shown with
PVC top)
L150
A5 information holder (an-gled)
(Shown with PVC top)
AP150
A5 ad-print holder(70 deg. angle)
(Single-sided - to hold material 210mm x 148mm)Can also be displayed landscape
Information & Menu Holders:
Accessories:
Overprinting:
1 / 3 A 4 S I Z E H O L D E R S
A 4 S I Z E H O L D E R S ( c o n t i n u e d )
A 5 S I Z E H O L D E R S
S M A L L H O L D E R A 4 S I Z E H O L D E R S
SW1Slat wall clips attach wallmount to
slatwalls
HB1Wire grid clipsattach wall mount to
wire grids/AL95
CLWWall mount clip to attach wall mount
unit to AL95 & AL47 &W230 holders
Ring ClipRing & Screw
to secure the carouselbrochure holder to pole
PC260Placecard holder
to hold 260gsm card 90 x 60mm
CL1 & CL2Clip to attach
BC93 to brochure holders CL2 to attach
wall mounted units
CD1 DividerConverts A4 size holder to 1/3rd A4(Use with W230,
3W230, 4C230, 6CA230)CD2 Divides 4C330
pockets
Add that little bit extra toyour display!
Personalise holders with your company logo,a message or advertising slogan.
We can offer you a customised screenprint-ing service to apply your message etc di-rectly onto the brochure/information holderof your choice.
AL95950mm Aluminium Wall Hanger Strip(AL47 also avail. in 470mm size)
Carousels: MIX AND MATCH REVOLVING CAROUSEL STANDS
• A unique modular sys-tem which allows youto design your own�oor standing carousel.
• Three sizes of pocketsare available, and can bemixed and matched foryour choice ofbrochure sizes.
• Easily assembled in min-utes with the Allen keyprovided.
• Each module ofbrochure holders maybe rotated independ-ently.
• Brochure pockets are atan angle of 120o formaximum viewing.
SPECIFICATIONSCarousel height is 1460mm
Brochure modules clearplastic. Base and pole lightgrey.
Unit illustrated showsthree di�erent brochureholder modules.
CAP210 Header accessoryavailable.
Base with castors is alsoavailable on request (op-tional extra). FS1CW1
12 pocket 1/ 3 rd A4 tier for usewith any carousel
12CA104
6 pocket A4 tier for use withany carousel
(Shown with optional CD1 divider)
6CA230
6 pocket A5 tier for use withany carousel
6CA160
Optional A4 header foruse with carousel units
CS2, CS3, CS4
CAP210
Mini carousel supplied w/header & choice of tier
Height: 1210mm inc. CAP 210
MSC1CS3
A two tier �oor carouselwith two modules of
your choiceHeight: 1500mm
CS2
A four tier �oor carouselwith two modules of
your choiceHeight: 1500mm
CS4
12 pocket A4 ‘Classic’carousel
Overall height: 1500mm
12F230
24 pocket A4 ‘Classic’carousel
Overall height: 1500mm
24F230
6 pocket 1/ 3 rd A4 tier foruse with 12F230 & 24F230
(Shown with optional CD1 divider)
3W230
Mini-carousel withtray and A4 header
included
Tray carousel - 4 trays(A4 header included)
Height: 1500mm excluding headerpanel - 1900mm with header)
MCT1 CAT 4
CT460 Round tray forcarousel units
MCT1 & CAT-4
Distributor:
P and M Plastics and RubberTelephone: 07 5535 7544Facsimile: 07 5535 [email protected]
Top Related