Flatblade screwdrivermedium
Philips screwdriverUK size #3 pozi head
0 0 20 30 40 50 60 70 80 90 00 0 20 30 40 50
0 2 3 4 5 6
Ruler/tapemeasure
Smallhammer
CordlessDrill
Eye protection
KND 12 rev. 01 Date: 10/05/19
Corner Conversion Kit (Creates A Corner Robe)
DIMENSIONS
Width
Depth
Height
5,8 cm
49,8 cm
226 cm
256002
Pre-Assembly Preparation: please check the pack contents before starting to assemble this product.
Clean hands or light coloured protective gloves should be used. Please don’t wear dark protective gloves, as may mark the products.
Product is heavy. TAKE CARE when lifting to avoid personal injury and (or) damage to the product.
The fittings packs will contain SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Necessary Tools
Safety and care advice
IMPORTANT - PLEASE READ THESE INSTRUCTIONS FULLY BEFORE STARTING ASSEMBLY
• Check you have all the components and tools listed on pages 1 and 3.
Remove all fittings from theplastic bags and separate them into their groups.
• Keep children and animals away from the work area, small parts could choke if swallowed.
• Make sure you have enough space to layout the parts beforestarting.
• Do not stand or put weight on the panels, this could cause damage.
• Assemble the unit as close to its final position (in the same room) as possible.
• It is our recommendation touse a hand screw-driver when inserting screws for handles to prevent over-tightening
• Assemble on a soft level surface to avoid damaging the unit or your floor.
• Parts of the assembly will be easier with 2 people.
• If using power tools, please follow the safety instructions supplied with the tools.
• Skin contact: Removecontamination by washing with soap and water. This procedureshould also be followed prior to eating and drinking.
• Eye contact: Rinse immediately with clean water for 15 minutes and seek medical advice.
GLUE SAFETY - TAKE CARE WHEN USING GLUE, PLEASE FOLLOW THE ADVICE BELOW
CLEANING INSTRUCTIONS
• This product has been manufactured using modern manufacturing methods and materials. With appropriate in-home care and mainte-nance it will provide trouble free performances. Many domestic multi-purpose cleaning agents are unsuitable for use on this product.
• The use of aggressive chemicals can result in irreversible damage. Please follow these guidelines care-fully.
• To clean the internal and external area of yourwardrobe and chest of draw-ers, use only 5% soap, 95% water solution, wiping with a damp (not wet) cloth. Dry with a clean cloth.
• Dust your furniture with a soft clean cloth.
• For stubborn stains, on the exterior face of your furniture, we recommend the use of a solvent cleaner designed to remove dirt from furniture without harming the finish.
•
• Please dispose of all packaging carefully and responsibly.
Warning: Before attempting to fix to the wall, check the wall for hidden pipes and cables.
• If swallowed: Seek medical advice immediately. If possi-ble show product information label to your doctor
We recommend our own branded cleaning agent, which can be purchased through your retailer. If you wish to use an alternative product, it is advisable to test a small non visible area first, and then only treat the stained area.
• DO NOT USE wax furniture polish, abrasive or aggressive cleaners, bleach or hypochlo-rate (chlorine) based cleaners, multi-purpose cleaners, dilutes, acetone, alcohol, solvent or similar products.
2
Components - Panel + ProfilesPlease check you have all the panel, profiles listed below
1 2
3
A B
Note: The quantities below are the correct amount to complete the assembly. In some cases morefittings may be supplied than are required.
35mm Screw x 22
Components - FittingsPlease check you have all the fittings listed below
170° clip hinge x 4 soft closing x 2 cover x 2 hinge mounting plate x 4
RP Q1 Q
SO
LD S
EP
AR
ATL
Y
3
Step 1
1
A
A
A
A
A
A
A
A
2
3
1
A A
2
3
Assembly Instructions Corner Conversion Kit Assembly
Plan view
Fit together the three components to create a single panel
4
structionsStep 2
AAA
A
A
1000mm
A A A
A
A
1000mm
Assembly Instructions Fitting To Wardrobe #1
LH Version RH Version
Plan viewPlan view
Panel will fit to exact height of robe and should finish flush with top panel of robe.There are not pre drilled holes in the front edge of the top or base panels.
5
Step 3
35mm
22mm
385mmAA
A
A
A
A
A
A
A
A
A
Assembly Instructions Fitting To Wardrobe #2 To Panel
1150mm
Fix screws through side panel of robe #2 into corner + back posts
robe #2
robe #1
22 mm must be left clear from the front edge of the corner post
Measure carefully, there are no drill hole positions marked inside the connecting robe.
6
Step 4
R
R
R
R
P
P
P
PR
R
R
R
P
P
P
P
RP
R
P
CLASSIC
MODERN
Assembly Instructions Application Of Hinges To Door
7
Step 5
not used
not used
Classic
Modern
Assembly Instructions Hanging Of Doors
Take careful note of which hinge hole to use according to style of door
8
Step 6
Step 7
Step 8
Q1
Q
Assembly Instructions Door Adjustment
Soft closing
Apply hinge plate cover
9
Top Related