Success factor industrial remote access – New requirements demand new approaches
Urbanization, globalization, population growth and climate change require new solutions from industry that go far beyond classical remote control and remote monitoring. Industrial communication is vital for high-performance automation applications.With a broad product range for Industrial Remote Communication, we offer the ideal solution for a variety of requirements in terms of availability, flexi-bility and bandwidth. Whether in factory automation, the process industry or public infrastructure sectors – Industrial Remote Communication provides secured and economical remote access to widely distributed machines, plants and applications of all sizes.
Increased productivity with teleservice (remote maintenance/diagnostics)
Machines and plants are increasingly operated in places that are far away from the place of manufacture. Plant manufacturers must nevertheless be able to provide support during commissioning and in the event of a fault. Teleservice or remote maintenance can be used to diagnose and maintain machines and systems from anywhere in the world. This contributes consid-erably to the reduction of on-site service deployments and the associated travel and staff costs. Even plant subsystems and controllers can be remotely programmed or program modules updated with the latest software.
There are a range of possible applications for teleservice, particularly in plant and machine building.
These include:
Remote support during commissioning Remote maintenance of machines Remote support of on-site operating personnel Firmware and program updates Diagnostics, optimization, and fault rectification
SIMATIC NET Selection Tool:www.siemens.com/snst-standalone
Secured remote access for teleservice via SINEMA Remote Connect: remote maintenance of serial machines at different end customers
Mobilewireless network
VPN tunnel
Service Center
Internetconnection
MachineFactoryOfficeCustomer A Customer B Customer C Customer D
Service technician (mobile)
Internet connection Wired internet
OpenVPN Client
SCALANCE M804PB + KEY-PLUG
SINEMA Remote Connect
Industrial Ethernet
SCALANCE M876-4 + KEY-PLUG
G_I
K10
_XX
_303
70
SCALANCE S615 + KEY-PLUG
SCALANCE SC642-2C
PROFIBUS
Industrial Remote Communication
siemens.com/teleservice
Components for TeleserviceOrdering overview – Edition 06/2018
www.siemens.com/teleservice
The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual use do not always ap-ply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifica-tions are subject to change without notice. All product designations may be trademarks or product names of Siemens AG or supplier companies whose use by third parties for their own purposes could violate the rights of the owners.
Siemens AGProcess Industries and DrivesProcess AutomationPostfach 48 4890026 NürnbergGermany
© Siemens AG 2018Subject to change without prior noticeArticle No. 6ZB5530-1CF02-0BA3W-FPN8Z-PD-PA213 / Dispo 26000BR 0518 3. LMB 12 EnPrinted in Germany
Security information
Siemens provides products and solutions with industrial security functions that support the secure operation of plants, systems, machines and networks.In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens’ products and solutions constitute one element of such a concept. Customers are responsible for pre-venting unauthorized access to their plants, systems, machines and networks. Such systems, machines and components should only be connected to an enterprise network or the internet if and to the extent such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation) are in place. For additional information on industrial security measures that may be implemented, please visithttp://www.siemens.com/industrialsecurity
Siemens’ products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customer’s exposure to cyber threats. To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed under http://www.siemens.com/industrialsecurity.
www.siemens.com/teleservice
Ordering overview for Industrial Remote Communication – TeleserviceRemote networks – components for remote communication over public or private, heterogeneous networksApplication Product Comments Article no. 1)
Management platform for secured connections and simple remote access
SINEMA Remote Connect Virtual Appliance Basic software package for 4 VPN connections;SINEMA Remote Connect Client, license key on USB stick
6GK1720-1AH01-0BV0
SINEMA Remote Connect Upgrade 64 Upgrade of 64 VPN connections 6GK1722-1JH01-0BV0SINEMA Remote Connect Upgrade 256 Upgrade of 256 VPN connections 6GK1722-1MH01-0BV0SINEMA Remote Connect Upgrade 1024 Upgrade of 1024 VPN connections 6GK1722-1QH01-0BV0SINEMA Remote Connect Client OpenVPN client for connecting to SINEMA Remote Connect,
license key on USB stick6GK1721-1XG01-0AA0
KEY-PLUG SINEMA RC Swap medium for activating the connection of SCALANCE M-800/ S615 to SINEMA Remote Connect with auto configuration
6GK5908-0PB00
SINEMA Remote Connect connection with auto configurationIndustrial Router SCALANCE M Industrial Security Appliances SCALANCE S Communications Processors (CPs)SCALANCE M804PB SCALANCE M876-3
yes, with KEY-PLUG SINEMA RC
SCALANCE S615 yes, with KEY-PLUG SINEMA RC CP 1243-1 ab FW V3.1SCALANCE M816-1 SCALANCE M876-4 SCALANCE SC632-2C
yes
CP 1243-7 ab FW V3.1SCALANCE M826-2 SCALANCE SC636-2C CP 1543SP-1 ab FW V2.0SCALANCE M874-2 SCALANCE SC642-2CSCALANCE M874-3 SCALANCE SC646-2C
SOFTNET Security ClientSoftware for establishing secured connections
SOFTNET Security Client SIMATIC NET Ind. EthernetSOFTNET Security Client V5; SW for setting up secured IP-based VPN connections from a PC/PG to network segments secured by SCALANCE S, SCALANCE M and Security CPs license key on USB stick
6GK1704-1VW05-0AA0
© Siemens AG 2018
Ordering overview for Industrial Remote Communication – Teleservice
Remote networks – components for remote communication over public or private, heterogeneous networksApplication Product Network
type 1Network type 2
Interfaces Comments Article no. 1)
Modems and routers
SCALANCE M804PB PROFIBUS/ MPI 2 x RJ451 x RS-485
Router for connecting PROFIBUS/MPI automation devices to Ethernet net-works (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration
6GK5804-0AP00-2AA2
SCALANCE M812-1
Industrial Ethernet
Internet (DSL)
1 x RJ451 x RJ12
ADSL2+ ANNEX A 6GK5812-1AA00-2AA2ADSL2+ ANNEX B, J 6GK5812-1BA00-2AA2
SCALANCE M816-1 4 x RJ451 x RJ12
ADSL2+ ANNEX A; SINEMA Remote Connect connection with auto configuration
6GK5816-1AA00-2AA2
ADSL2+ ANNEX B, J; SINEMA Remote Connect connection with auto configuration
6GK5816-1BA00-2AA2
SCALANCE M826-2 2-wire (SHDSL) 4 x RJ452 x terminal block (2-pin)
SHDSL; SINEMA Remote Connect connection with auto configuration
6GK5826-2AB00-2AB2
SCALANCE M874-2 Mobile wireless GSM(2G)
2 x RJ451 x SMA antenna connection
IP router for transparent data transfer between Ind. Ethernet and mobile wireless network 2G (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration
6GK5874-2AA00-2AA2
SCALANCE M874-3 Mobile wireless GSM (2G), UMTS (3G)
IP router for transparent data transfer between Ind. Ethernet and mobile wireless network 3G (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration
6GK5874-3AA00-2AA2
SCALANCE M876-3 Mobile wireless GSM (2G), UMTS (3G)/CDMA2000(EV-DO)
4 x RJ452 x SMA antenna connection
IP router for transparent data transfer between Ind. Ethernet and 3G mobile wireless network (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration
6GK5876-3AA02-2BA2
SCALANCE M876-4 (EU)
Mobile wirelessGSM (2G), UMTS (3G), LTE (4G)
4 x RJ452 x SMAantenna connection
IP router for transparent data transfer between Ind. Ethernet and mobile wireless network 4G (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration
6GK5876-4AA00-2BA2
SCALANCE M876-4 (NAM)(for use in NorthAmerica)
6GK5876-4AA00-2DA2
RUGGEDCOM RX1400
4 x RJ455 x SMA antenna connection (mobile wireless, WLAN and GPS)
Advanced small form factor rugged mobile wireless router with integrated Ethernet Switch, Wireless LAN, Serial Device Ser ver, GPS and Virtual Process-ing Engine for third-party appli ca tions
6GK6014-0MA2..-....
Industrial Security Appliances
SCALANCE SC632-2C
Industrial Ethernet
2 x RJ452 x Combo Port with RJ45 or SFPs
Protection of devices and networks with firewall; additional functions: address translation with NAT/NAPT; SINEMA Remote Connect connection with auto configuration
6GK5632-2GS00-2AC2
SCALANCE SC636-2C 4 x RJ452 x Combo Port with RJ45 or SFPs
6GK5636-2GS00-2AC2
SCALANCE S615 5 x RJ45 Protection of devices and networks with firewall and VPN (VPN with IPsec/OpenVPN 2)); SINEMA Remote Connect connection with auto configuration
6GK5615-0AA00-2AA2
SCALANCE SC642-2C 2 x RJ452 x Combo Port with RJ45 or SFPs
Protection of devices and networks with firewall and VPN (up to 200 IPsec tunnel 2)); additional functions: address translation with NAT/NAPT; SINEMA Remote Connect connection with auto configuration
6GK5642-2GS00-2AC2
SCALANCE SC646-2C 4 x RJ452 x Combo Port with RJ45 or SFPs
6GK5646-2GS00-2AC2
Accessories
SCALANCE M/S615 desktop stand Desktop stand for table mounting of SCALANCE M812/ M816/ M874-x/ M876-x/ S615/ TAP104
6GK5898-8MD00
SCALANCE M-800/S615 19" mounting frame SCALANCE M-800/S615 19" mounting frame for 19" racks for SCALANCE S615/ TAP104
6GK5898-8MR00
Mobile wireless antenna ANT794-3M, flat antenna, 1.2 m connecting cable connected permanently to the antenna
For use in GSM networks 6NH9870-1AA00
Mobile wireless antenna ANT794-4MR, flat antenna, 5 m connecting cable connected permanently to the antenna
For use in GSM/UMTS and LTE networks
6NH9860-1AA00
Mobile wireless antenna ANT896-4MA, direct installation with SMA connection method
6GK5896-4MA00-0AA3
Mobile wireless antenna ANT896-4ME, compact design IP66, incl. 1x N-Connect female connection
6GK5896-4ME00-0AA0
Mobile wireless antenna ANT896-6MH, suitable for railway applica-tions, installation on vehicle roof possible, incl. 1x N-Connect female connection
6GK5896-6MH00-0AA0
Mobile wireless antenna ANT896-6MM, E1 approval, incl. 3 x pigtail with QMA connector, incl. GPS and WLAN connection, installation possible on vehicle roof, appropriate cables for railway applications can be ordered separately
6GK5896-6MM00-0AA0
LP798-1N lightning protector 2 N-Connect female connectors, 0 ... 6 GHz, IP68
6GK5798-2LP00-2AA6
Cabinet feedthroughs N/N female/female 2 N-Connect female connectors, 0 ... 11 GHz, IP68
6GK5798-2PP00-2AA6
Elbow adapter SMA/SMA male/female 6GK5898-1CV00-4AA0SIMATIC NET N-Connect/SMA male/male Flexible connection cable Length 0.3 m 6XV1875-5LE30
Length 1 m 6XV1875-5LH10Length 2 m 6XV1875-5LH20Length 5 m 6XV1875-5LH50
SIMATIC NET N-Connect male/male flexible connection cable Length 1 m 6XV1875-5AH10Length 2 m 6XV1875-5AH20Length 5 m 6XV1875-5AH50Length 10 m 6XV1875-5AN10
SIMATIC NET QMA/N-Connect male/female flexible connecting cable (3 units)
Length 1m 6XV1875-5JH10
Industrial Security communications processors (CPs) with IPsecApplication Product Network
type 1Network type 2
Interfaces Comments Article no. 1)
Security communi-cations processors
CP 1243-1
Industrial Ethernet
1 x RJ45 For connection of SIMATIC S7-1200 as an additional Ethernet interface and for connection to control centers via tele-control protocols (DNP3, IEC 60870, TeleControl Basic), security (firewall, VPN); SINEMA Remote Connect connec-tion with auto configuration
6GK7243-1BX30-0XE0
CP 1243-71 x SMA antenna connection for LTE
For connection of SIMATIC S7-1200 to the 4G mobile wireless network (LTE); note country approvals; SINEMA Remote Connect connection with auto configuration
6GK7243-7KX30-0XE0
CP 1243-7 (US version)
6GK7243-7SX30-0XE0
CP 1543-1 1 x RJ45 For connection of SIMATIC S7-1500 to Ind. Ethernet; integrated security functions (firewall, IPsec) as well as support of FTPS and SNMPv3 protocols for data encryption
6GK7543-1AX00-0XE0
CP 1543SP-1 Industrial Ethernet via BusAdapter (BA), 2 ports (RJ45 or FO) depen-ding on BA type
For connection of distributed control-ler SIMATIC ET 200SP to Ind. Ethernet with 2-port switch (RJ45) and inte grated security functions (firewall, IPsec); SINEMA Remote Connect con-nection with auto configuration
6GK7543-6WX00-0XE0
CP 343-1 Advanced
Industrial Ethernet
PROFINET/Industrial Ethernet
1 x RJ45 + 2 x RJ45
For connection of SIMATIC S7-300 to Ind. Ethernet; integrated security functions (firewall, IPsec); additional integrated switch for Product Notification (2nd interface) and Layer 3 routing functionality
6GK7343-1GX31-0XE0
CP 443-1 Advanced 1 x RJ45 + 4 x RJ45
For connection of SIMATIC S7-400 to Ind. Ethernet; integrated security functions (firewall, IPsec); additional integrated switch for Product Notification (2nd interface) and Layer 3 routing functionality
6GK7443-1GX30-0XE0
CP 1628 IndustrialEthernet
2 x RJ45 For connection of PC/IPC to Industrial Ethernet with 2-port switch (RJ45) and integrated security (firewall, IPsec) via HARDNET-IE S7 and S7-Redconnect
6GK1162-8AA00
SIMATIC TeleService
TeleService Adapters
TS Adapter II Analog Analog
MPI/PROFIBUS 1 x RS 232
SIMATIC S7, TS Adapter IIfor SIMATIC TeleService RS 232 and integrated analog modem, connection to MPT/DP, power supply MPI or exter-nal 24 V, parameterization via USB
6ES7972-0CB35-0XA0
TS Adapter II ISDN ISDN SIMATIC S7, TS Adapter II ISDN for SIMATIC TeleService RS 232 and inte-grated ISDN modem, MPI/DP connec-tion, power supply MPI or external 24 V, parameterization via USB
6ES7972-0CC35-0XA0
TS Adapter IE Basic
By means of TS module
Industrial Ethernet 1 x RJ45
Network type dep.on connected module
6ES7972-0EB00-0XA0
TS Adapter IE Advanced
Network type dep.on connected module
6ES7972-0EA00-0XA0
Additional modules for TeleService Adapter
TS module GSM GSM Connection to TS Adapter IE Basic and TS IE Advanced
6GK7972-0MG00-0XA0
TS module modem AnalogConnection to TS Adapter IE Basic
6ES7972-0MM00-0XA0TS module ISDN ISDN 6ES7972-0MD00-0XA0TS module RS 232 RS 232 6ES7972-0MS00-0XA0
Software for TeleService Adapter
SIMATIC TeleServicesoftware
SIMATIC S7, TeleService V6.1 floating license E-SW, SW and documentation on CD, license key on USB stick
6ES7842-0CE00-0YE0
SIMATIC S7, TeleService V6.1 upgrade floating license E-SW, SW and docu-mentation on CD, license key on USB stick
6ES7842-0CE00-0YE4
Accessories Mounting adapter for S7-300 rail 60 mm
Installation of TS Adapter IE Basic and TS IE Advanced on SIMATIC S7-300 mounting rail
6ES7972-0SE00-7AA0
1) Current ordering data can be found on the Internet at: www.siemens.com/industrymallConditions of sale and delivery can be found at: www.siemens.com/automation/salesmaterial-as/catalog/en/terms_of_trade_en.pdf
2) For connection to SINEMA Remote Connect
© Siemens AG 2018
Top Related