COMMERCIAL INDUSTRIAL
LIGHTING
Edition 6a
LED CFL INDUCTION
… Leading the way in energy saving
Dear Customer Welcome to Edition 6a of our brochure containing our expanded range of LED lamps and fittings together with our range of compact fluorescent lamps.
As a specialist supplier of energy saving lighting products to industry and commerce, we aim to provide quality products at competitive prices to suit a wide range of applications and budgets. This year through close cooperation with our manufacturing partners and review of our logistics, we have been able to lower the prices of many of our products whilst maintaining consistent quality in the range.
Our products continue to be rigorously tested at our overseas and UK facilities and we are pleased to announce that our product guarantee on the LED range is to increase to 3 years as a consequence of our diligent work. Our local stockholding is being increased to meet the additional demand generated by our LED range.
Lighthouse continue to offer a complimentary lighting design service and can assist with energy saving and payback calculations to support our wholesalers and end users. Further product information can be found on our website www.ltc-ni.com, which includes technical specifications on our entire product range including our range of induction lamps.
We would like to extend thanks to our many existing customers and ex-tend a warm welcome to those seeking Lighthouse lighting products for the first time.
With best wishes
David Martin
Managing Director
INDEX
Page 1 Introduction
Page 2 LED Corn Lights
Page 3 LED Highbays
Page 4 LED Floodlights
Page 5 LED Floodlights
Canopy Conversion Kit
Page 6 LED Lowbay
LED T8 Tubes
Page 7 LED Downlights and Panels
Page 8 LED Non Corrosive Fittings
LED Ceiling Lights LED Wall Packs
Page 9 CFLs - Lustar Range
Compact Fluorescent Lamps
Page 10 CFL and LED Corn Light
Fittings
Page 11 Energy Saving Comparison
& Contact Details
… Leading the way in energy saving
Introduction
1
The Lighthouse range of LED Corn Lights uses the high efficiency Epistar 3528 chips with lumen outputs in
excess of 100 lms per watt. Each chip is encapsulated on to ventilated aluminium board with positive
airflow cooling on wattages over 60 watts. All lamps now have heat sinks on the aluminium boards and
have heat and surge protected ballasts for added durability. High power factor internal ballasts in E27 or
E40 size caps allow our lamps to be used with Lighthouse Alumstar, Polystar and appropriately ventilated
Lowbay fittings. Alternatively the lamps may be retrofitted into suitable SON or Metal Halide fittings.
… Leading the way in energy saving 2
LED Corn Lights
NOW WITH SURGE, HEAT PROTECTION & ADDITIONAL HEAT SINKS
ON THE LED BOARDS
NEW WATTAGES AVAILABLE
Product Watts Fitting Size mm Lumen Output
Current mA
Mounting Height
Alternative to
CL 20
CL 30
CL 40
CL 60
CL 80
CL 100
20
30
40
60
80
100
E27
E27
E27
E27
E40
E40
73 x 170
90 x 215
90 x 255
90 x 275
105 x 295
110 x 315
2000
3000
4000
6000
8000
10000
85
140
165
250
330
450
2-3 m
3 m
3 m
4-5 m
4-6 m
4-6 m
70w MH/ SON
70w MH/ SON
70w MH/ SON
150w MH/ SON
250w MH/ SON
250w MH/ SON
180 - 240V AC 50Hz, Power Factor 0.95, Lamp life up to 50,000 hours
Optional E27 - E40 converters available
Colour temperature 6400k as standard
Warranty 3 years/ 15,000 hours subject to terms & conditions
CL 80 - 100 CL 20 - 60
The Lighthouse LED Highbay range is designed specifically for industrial warehousing and commercial
applications where high efficiency characteristics are required. Based on branded chips with high power
factor ballasts, each fitting features heat conducting aluminium heat sinks and either 90 degree aluminium
or polycarbonate reflectors with optional bottom covers. A 2m tail is supplied for quick installation The
150 Watt fitting is offered with an optional adjustable microwave sensor which allows part of the fitting to
be switched on when movement is detected in the target area.
… Leading the way in energy saving 3
LED Highbays
NEW WATTAGES AVAILABLE
Product
Watts
Fitting mm
Lumen Output
Current mA
Beam Angle
Mounting Height
Alternative to
HL 100
HL 150
HL 200
100w
150w
200w
500 x 495
550 x 495
580 x 495
10000
13500
17500
450
650
800
120 Deg
120 Deg
120 Deg
4 - 9 m
6 - 10 m
6 - 12 m
250w MH/ SON
400w MH/ SON
400w MH/ SON
240V AC 50Hz, Power Factor 0.95, Lamp life up to50,000 hours
Colour temperature 5000 as standard
Warranty 3 years/ 15,000 hours subject to terms & conditions
P C
BALLAST
CHIP 50W
PIR
BALLAST
CHIP 50W CHIP 50W
Highbay/ Floodlight Duo Lighting Control
HL 100 HL 150 HL 200
The Lighthouse range of LED Floodlights are supplied with a powder coated alloy fitting with up to 3mm
mounting brackets on fittings above 50 watts and stainless steel bolts. Branded chips are used with high
power factor commercial grade ballasts. Our 2015 range is supplied with surge protected ballasts with
automatic current control giving better stability and performance. All floods are IP65 rated and are
supplied in black or grey bodies. Optional photocell and PIRs are available.
… Leading the way in energy saving 4
LED Floodlights
NOW WITH SURGE & HEAT PROTECTION
NEW WATTAGES AVAILABLE
Product
Watts
Size H x W x D mm
Lumen Output
Current mA
Lighting Distance
Alternative to
FL 10
FL 20
FL 30
FL 50
FL 80
FL 100
FL 150*
FL 200*
10
20
30
50
80
100
150
200
115 x 87 x 82
180 x 140 x 100
225 x 180 x 120
285 x 235 x 130
285 x 360 x 100
285 x 360 x 100
455 x 320 x 195
520 x 325 x 210
900
1850
2700
4100
6500
8000
13200
16000
50
90
140
225
365
450
650
900
10 m
15 m
15 m
20 m
25 m
30 m
40 m
45 m
150w T/ HAL
300w T/ HAL
500w T/ HAL or 70w MH/SON
150w MH/ SON
250w MH/ SON
250w MH/ SON
400w MH/ SON
400w MH/ SON
110 - 240V AC 50Hz, Power Factor 0.95, Lamp life up to 50,000 hours
Colour temperature 6400k as standard
*Wide angle reflector as standard. Use suffix FPIR and PC for PIRs and Photocells
Warranty 3 years/ 15,000 hours subject to terms & conditions
FL 150 and FL 200 supplied in Black as standard, other wattages available in Grey or Black
FL 10 FL 50 FL 80/ 100 FL 30 with PIR
FL 150 (front) FL 150 (back) FL 200 (front) FL 200 (back)
Our 150w and 200w Floodlights are offered with an optional adjustable microwave sensor which allows
part of the fitting to be switched on when movement is detected within targeted area.
FL 150 - Standby 50w Controllable 100w Total 150w FL 200 - Standby 50w Controllable 150w Total 200w
… Leading the way in energy saving 5
LED Floodlights
Product
Watts
Size H x W x D mm
Lumen Output
Current mA
Lighting Distance
Alternative to
Colour Temp
FL 150*
FL 200*
150
200
455 x 320 x 195
520 x 325 x 210
13200
16000
650
900
40 m
45 m
400w MH/ SON
400w MH/ SON
6400k
6400k
110 - 240V AC 50Hz, Power Factor 0.95, Lamp life up to 50,000 hours
*Wide angle reflector as standard. Use suffix FPIR and PC for PIRs and Photocells
Warranty 3 years/ 15,000 hours subject to terms & conditions
FL 150 External Photocell
Highbay/ Floodlight Duo Lighting Control
P C
Ballast
Chip 50w
PIR
The Lighthouse canopy conversion kit houses our energy saving 50, 80 or 100 watt flood lights. This can
be retrospectively fitted into an existing canopy mounting point to create a modern crisp visual appear-
ance. Each fitting should take around 20 minutes to fit using our bespoke fitting tool. This conversion
offers significant annual energy savings.
Based on 8 lights used for 4,000 hours charges at 12p, 17p and 17c. Prices in comparison to 250 w MH/ SON. Assumes standard canopy height 0f 4.4m
Ballast
Chip 50w Chip 50w
Watts UK NI EIRE Average Lux at pump height
50 w £896 £1224 €1224 175
80 w £752 £1064 €1064 260
100 w £692 £952 €952 300
AVERAGE ENERGY SAVING
Lighthouse Canopy Conversion Kit
The Lighthouse LED Lowbay is specifically designed for industrial warehousing and commercial
applications where high efficiency characteristics are required. Based on the Bridgelux 45mil chip with
high power factor ballast, each fitting features heat conducting aluminium heat sinks with a 120 degree
beam angle. A 2m tail is supplied for quick installation.
… Leading the way in energy saving 6
LED Lowbay
NEW FITTING
IP 65 RATED
SURGE PROTECTION
Product
Watts
Size W x L x D mm
Lumen Output
Current mA
Mounting Height
Alternative to
LB 100 100 580 x 295 x 10 10000 450 3 - 6 m 250w MH/ SON
240V AC 50Hz, Power Factor 0.95, Lamp life up to 50,000 hours
Colour temperature 6400k as standard
Warranty 3 years/ 15,000 hours subject to terms & conditions
NEW RANGE
The Lighthouse range of LED T8 Tubes can easily be retrofitted in to existing T8 fittings. The tubes are
supplied complete with opaque diffusers and optional swivel end caps.
LED T8 Tubes
Product
Watts
Size L mm
Lumen Output
Current mA
Colour Temp
TL 9
TL 18
TL 25
TL 30
9
18
25
30
600
1200
1500
1800
900
1800
2400
2800
40
80
105
125
4000k
4000k
4000k
4000k
240V AC 50Hz, Power Factor 0.95, Lamp life up to 30,000 hours
Swivel end caps optional, use suffix S
Warranty 3 years/ 15,000 hours subject to terms & conditions
The Lighthouse range of LED Down Lights is specifically designed for commercial, retail and office
applications. Based on the Epistar 5730 chip with high power factor ballasts, each fitting features white
powder coated bodies with integrated heat conducting aluminium alloy heat sinks, spring loaded clips and
externally mounted ballasts. Emergency options providing 50% output for 3 hours are available on the
16w and 24w fittings.
… Leading the way in energy saving 7
LED Downlights
EMERGENCY PACKS NOW AVAILABLE
Product
Watts
Diameter mm
Lumen Output
Current mA
Mounting Height
Alternative to
Colour Temp
Cut Out mm
DL 9W
DL 12W
DL 16W*
DL 24W*
9
12
16
24
125
140
190
230
720
1050
1440
1920
37
50
70
116
3 m
3 m
3 m
3 m
50w HAL
18w PL
2 x 18w PL
2 x 26w PL
4000k
4000k
4000k
4000k
115
125
165
195
240V AC 50Hz, Power Factor 0.95, Lamp life up to 30,000 hours
Warranty 3 years/ 15,000 hours subject to terms & conditions
*Use suffix EM for Emergency options
The Lighthouse range of LED Panels are supplied edge lit on 2 sides
using the Epistar 2835 chip, and feature aluminium edge frames with
integrated fixing brackets for surface mounted applications. The panels
are also supplied with detachable external drivers with quick
connectors. Emergency options providing 50% output for 3 hours are
available on the 42w fittings.
LED Panels
Product
Watts
Size W x L mm
Lumen Output
Current mA
Mounting Height
Colour Temp
Alternative to
PL 42S*
PL 42L*
PL 84L
42
42
84
600 x 600
300 x 1200
600 x 1200
3000
3000
6000
175
175
350
2 - 4 m
2 - 4 m
2 - 4 m
4000k
4000k
4000k
4 x 18w T8
2 x 36w T8
4 x 36w T8
240V AC 50Hz, Power Factor 0.95, Lamp life up to 30,000 hours
Warranty 3 years/ 15,000 hours subject to terms & conditions
*Use suffix EM for Emergency options
EMERGENCY PACKS NOW AVAILABLE
… Leading the way in energy saving 8
LED Non Corrosive Fittings/ Ceiling Lights/ Wall Packs
NCL 25/ 50
Product
Watts
Size W x L mm
Lumen Output
Current mA
Mount. Height
Alt. to
NCL 25
NCL 50
25
50
135 x 670
135 x 1570
2400
4500
100
225
2 - 3 m
2 - 3 m
2 x 18w
2 x 58w
240V AC 50Hz, Power Factor 0.95, Lamp life up to 30,000 hours
Colour 4000k as standard
Warranty 3 years/ 15,000 hours subject to terms & conditions
Product
Watts
Size W x L mm
Lumen Output
Current mA
Mount. Height
Alt. to
CF 15 15 330 x 100 1150 65 2 - 3 m 28w 2D
240V AC 50Hz, Power Factor 0.95, Lamp life up to 30,000 hours
Colour 4000k as standard
Warranty 3 years/ 15,000 hours subject to terms & conditions
CF 15
Product
Watts
Size W x L mm
Lumen Output
Current mA
Mount. Height
Alt. to
WP 30 30 210 x 310 x 190 2300 225 2 - 3 m 2 x 26w PL
240V AC 50Hz, Power Factor 0.95, Lamp life up to 30,000 hours
Colour 4000k as standard
Warranty 3 years/ 15,000 hours subject to terms & conditions
WP 30
LED Wall Pack
Based on genuine Epistar chips with high power factor ballasts the wall packs feature black powder coated
bodies with integrated heat conducting aluminium alloy heat sinks and stainless steel screws. Optional
photocells are available. (Rating IP 65)
LED Ceiling Lights
Surface mounted ceiling light is supplied with polycarbonate body and opaque diffuser. The fittings can be
ceiling or wall mounted. (Rating IP 20)
LED Non Corrosive fittings
Supplied with polycarbonate bodies using the Epistar 2835 chips. The fittings come complete with stainless
steel clips in surface mounting or suspension options. (Rating IP 65)
The Lighthouse Lustar Range uses compact fluorescent lamp technology to provide efficient lighting
solutions and is a suitable alternative to Metal Halide and SON lighting.
Our internal ballasted lamps can be retrofitted into existing ventilated fittings by isolating the switch
gear in the fitting and taking the supply directly to the lamp holder.
Alternatively the Lustar Range may be used with our Alumstar and Polystar luminaires specifically
designed for commercial and industrial applications.
The lamps offer a range of benefits including instant start and restart, and can be used in a variety of
applications including warehousing, production, workshops, retails, commercial and leisure environments.
… Leading the way in energy saving 9
Lustar Range - Compact Fluorescent Lamps
NEW WATTAGES AVAILABLE
Product Watts Fitting Size
W x L (mm)
Lumens min.
Colour Temp
Current mA
Mounting Height
Alternative to
LU 30S
LU 45S
LU 60S
LU 75S
LU 95S
LU 125
LU 150
30
45
60
75
95
125
150
E27
E27
E27
E27
E27
E40
E40
68 x 200
78 x 220
78 x 265
100 x 270
100 x 300
125 x 335
125 x 350
1800
2700
3600
4500
6000
7500
9000
6400k
6400k
6400k
6400k
6400k
6400k
6400k
150
225
250
375
475
625
750
3 m
3 m
3 m
3-4m
4-5 m
4-6 m
4-6 m
150w incand/GLS
200w incand/GLS
70w MH/ SON
100w MH/ SON
150w MH/ SON
250w MH/ SON
250/400w MH/ SON
240V AC 50Hz, Power Factor 0.95, Average Lamp life 8,000 hours
Optional E27 - E40 converters available
Warranty up to 1 year/ 2,000 hours subject to terms & conditions
*4000k colour temp—check availability at time of ordering
LU 30S/ 45S/ 60S/ 75S/ 95S LU 125/ 150
Lighthouse has selected a range of luminaires and lowbay fittings designed specifically to maximise the
light output of the Lustar CFL and LED Corn Light range. All fittings are specifically constructed with
suitable ventilation to maximise lamp life.
These fittings are suited to a wide range of applications, warehousing & storage, workshops, production
areas, retail shops/ showrooms, offices, schools and gymnasiums.
… Leading the way in energy saving 10
CFL and LED Corn Light Fittings
Product Size
H x W mm Lamp Options
CFL Cornlight Bottom Cover *
Alumstar 2
Alumstar 3
340 x 420
365 x 490
LU 60S/ 75S/ 95S CL 30/ 40/ 60
LU 125/ 150 CL 60/ 80/ 100
Alumstar 2 BC
Alumstar 3 BC
Spun aluminium luminaires High reflective internal surface increasing light output by 8-10%
Optional polycarbonate bottom cover available * Lamp & Bottom Cover supply and order separately
Alumstar Range
Product Size
H x W mm Lamp Options
CFL Cornlight Bottom Cover *
Polystar 2
Polystar 3
315 x 410
380 x 495
LU 60S/ 75S/ 95S CL 30/ 40/ 60
LU 125/ 150 CL 60/ 80/ 100
Polystar 2 BC
Polystar 3 BC
Polycarbonate luminaires Durable fitting allows maximum light emission Optional polycarbonate bottom cover available
* Lamp & Bottom Cover supply and order separately
Polystar Range
Product Size
H x W x L Lamp
Options Bottom Cover *
Lowbay 1 150 x 290 x 590 LU 95S/ 125/ 150 CL 60/ 80/ 100 Lowbay Glass Cover
Mild Steel body with powder coated white finish Optional Glass cover available
* Lamp & Glass Cover supply and order separately
Product Size
W x L mm Highbay Options
E40 SUSP 140 x 240 (includes hook) Alumstar / Polystar
Suspension lamp holder specifically designed to use with highbays Metal & PVC outer shell with hook and locking screws
Complete with porcelain E40 holder * Highbay supply and order separately
E40 SUSP
Lowbay
Lighthouse energy saving lighting products offer opportunities to save money in many ways:-
1. All lamps offer high lumen outputs;
2. Long lamp life and high lumen maintenance;
3. Instant start and restart capabilities offering opportunities to automate the lamps with suitable PIRs and Photocells.
Typical examples of energy savings against a wide range of lamps:-
Distributor Warranty
Lighthouse offers a ‘WARRANTY’ on all products.
Please refer to our website for terms and conditions of sales.
Warranties are invalidated by inappropriate installations and misuse of products.
Original Lamp
Lighthouse Alternative
Annual Savings (£)
Saving over lamp life (£)
Maintenance Savings (£)
400 w MH/ SON FL 200 125 1562 240
400 w MH/ SON HL 150 149 1862 240
400 w MH/ SON LU 150 149 298 -
250 w MH/ SON HL 100 84 1050 240
250 w MH/ SON LU 125 60 120 -
250 w MH/ SON CL 80 94 1175 240
Savings based on 4000 hours per annum, unit electricity 12p, maintenance based on average lamp life expectancy.
Full Energy Savings Calculator available in the Downloads Section of our website www.ltc-ni.com.
In designing a suitable lighting scheme, it is important not to exceed recommended mounting heights and to provide adequate lux levels for the facility and its application.
Lighthouse offers a complimentary design and technical advice service to provide lighting designs and energy
savings calculations and paybacks. Please contact our head office or your area representative for details.
Lighthouse Trading Company Ltd
Unit 2, 6 Flush Park, Lisburn, Co. Antrim, N. Ireland, BT28 2DX.
UK / Ireland orders & sales info: t - 00 44 (0)28 92673395 f - 00 44 (0)28 92673396 Website: www.ltc-ni.com Email: [email protected]
Product Technical Information
Due to our policy of continuing improvement, products may be subject to alteration or amendments.
Please refer to our website for current product specifications.
Agent
… Leading the way in energy saving
ENERGY SAVING COMPARISON & FURTHER INFORMATION
Top Related