1. How to use ClusterDesktop Note: Before connecting to your
computer, download and install ClusterDesktop for your operating
system. For more information see Tutorials on how-to install/run
ClusterDesktop. To start working remotely on your computer use one
of the following methods VNC, RDP, SCP or noVNC connection,
described in tutorials on How- to use ClusterDesktop:
ClusterDesktop I. Audio and video streaming using VLC and FTP /with
this method the file is streamed directly from your remote
computer/
2. How to use ClusterDesktop ClusterDesktop 1. To be able to
transfer sound with ClusterDesktop, you need an ordinary audio
cable /as the one on the picture/ 2. You should connect one end of
this cable to the audio output port and the other to the microphone
port /as shown on the picture/
3. How to use ClusterDesktop ClusterDesktop Exsample:
[email protected]:1031 4. Set up ConnectBot
Install and run ConnectBot on device from which you are accessing
your computer Type your Remote computer User Name, ClusterDesktop
server and SCP port as shown in the picture below on it if closed /
when the button is white the port is closed, and when the button is
blue the port is open for one connection / 3. Check on your account
if SCP port is open click once
4. How to use ClusterDesktop ClusterDesktop Type your remote
computer password and click Enter Click Yes
5. How to use ClusterDesktop ClusterDesktop Click on Port
Forwards Click on Add port forward
6. How to use ClusterDesktop ClusterDesktop Set up as shown in
the picture 1 On Nickname type: 58080 2. On Source port type: 58080
3. On Destination type: localhost:58080 4. Click Create port
forward
7. How to use ClusterDesktop ClusterDesktop Check Use VideoLAN
VLC for streaming on next restart and click on Restart 5. Set up
VLC on your remote computer. If your remote computer is Windows
based - setup as shown in 5.1 and skip 5.2. If your remote computer
is Linux or Mac based skip 5.1 and setup as shown in 5.2. 5.1
Windows based remote computer
8. How to use ClusterDesktop ClusterDesktop Open VLC media
player 1. Click on Media 2. Click on Open Capture Device 5.2 Linux
or Mac based remote computer After the restart of ClusterDesktop,
your remote computer will be ready and you can go to 6. to start
streaming.
9. How to use ClusterDesktop ClusterDesktop 1 Select Microphone
(High Definition Aud) 2 Click as shown in the picture 3 Click on
Stream Click Next
10. How to use ClusterDesktop ClusterDesktop Set up as shown in
the picture - Port: 58080 - Path: /pl.mpg Type stream and click
Next
11. How to use ClusterDesktop ClusterDesktop Select Audio-MP3
and click Next Check Stream all elementary streams
12. How to use ClusterDesktop ClusterDesktop Set up as shown in
the picture 6. Start streaming Open VLC on the device from which
you are accessing your computer and set up as shown in the picture
/URL: http://localhost:58080/pl.mpg /