Seite 1 von 7
Certificate of Conformity self-generation unit
Manufacturer / applicant: SMA Solar Technology AG
Sonnenallee 1
34266 Niestetal
Germany
Type of power generation unit: Grid-tied photovoltaic inverter
Name of PGU: SHP75-10
Active power (nominal power at reference conditions) [kW]:
75
Rated voltage: 400 V (3 phase + PE)
Firmware version: 1.90
Connection rule: VDE-AR-N 4105:2011-08 – Power generation systems connected to the low-voltage distribution network
Technical minimum requirements for the connection to and parallel operation with low-voltage distribution networks.
Applicable standards /
directives:
DIN VDE V 0124-100 (VDE V 0124-100): 2012-07 – Grid integration of power generation systems – low voltage
Test requirements for power generation units to be connected and operated parallel with the low-voltage distribution networks
The above mentioned generation unit have been tested and certified according to the test guideline VDE 0124-100. The electrical properties required in the connection rule are satisfied.
Verification of permissible system perturbations
Verification of the symmetry characteristics of three-phase inverter modules
Verification of the characteristics of the power generation unit on the network
Verification of the possibility to take part in the generation management / network security management
The certificate contains the following information:
Technical specifications of the power generation unit, the deployed auxiliary equipment and the software version used.
Schematic structure of power generation unit
Summarized information about the characteristics of the power generation unit (mode of operation)
BV project number: 14TH0075-VDE-0124-100_1
Certificate number: U18-0168
Date of issue: 2018-05-16
Certification body
Holger Schaffer
(A partial representation of the certificate requires the written permission of Bureau Veritas Consumer Products Services Germany GmbH)
Certification body of Bureau Veritas Consumer Products Services Germany GmbH Accredited according to DIN EN ISO/IEC 17065
Annex to the Certificate of Conformity self-generation unit No. U18-0168
Seite 2 von 7
F.3 Requirements for the test report for power generation units
Extract from the test report for unit certification Nr. 14TH0075-VDE-0124-100_1
„Determination of electrical properties“
Description of the power generation unit
Manufacturer / applicant: SMA Solar Technology AG
Sonnenallee 1
34266 Niestetal
Germany
Type of power generation unit: Grid-tied photovoltaic inverter
Name of PGU: SHP75-10
Max. active power PEmax [kW]: 75
Max. apparent power SEmax [kVA]: 75
Rated voltage: 400 V (3 phase + PE)
Firmware version: 1.90
Measurement period: 2018-03-12 to 2018-03-22
Description of the structure of the power generation unit:
The Solar converter converts DC voltage into AC voltage. The input and output are protected by varistors to Earth. The unit is providing EMC filtering at the output toward mains. The unit does provide galvanic separation from input to output (transformer). The output is switched off redundant by the high power switching bridge and a relay in series. This assures that the opening of the output circuit will also operate in case of one error.
Annex to the Certificate of Conformity self-generation unit No. U18-0168
Seite 3 von 7
F.3 Requirements for the test report for power generation units
Extract from the test report for unit certification Nr. 14TH0075-VDE-0124-100_1
„Determination of electrical properties“
Active power
(tested according to VDE 0124-100 point 5.3.2.1)
Name of PGU: SHP75-10
PEmax [kW] at cos φ = 1 75,13
SEmax [kVA] at cos φ = 1 75,13
PEmax [kW] at cos φ under-excite = 0,9 68,35
SEmax [kVA] at cos φ under-excite = 0,9 75,31
PEmax [kW] at cos φ over-excited = 0,9 67,55
SEmax [kVA] at cos φ over-excited = 0,9 75,20
Note:
At cosφ = 1 the active power is equal to the rated apparent power.
For the implementation of a reactive power set point assignment, the active power is reduced if necessary.
Reactive power supply
(tested according to VDE 0124-100 point 5.3.6.1)
Active power 40 – 60 %PEmax SEmax
Name of PGU: SHP75-10
cos φ under-excite: 0,891 0,907
cos φ over-excited 0,893 0,901
The self-generation unit is approved for self-generation systems larger than 13,8 kVA. The self-generation unit has the possibility for regulation of the displacement factor in the range from cos φ 0,90 over-excited to cos φ 0,90 under-excited.
Reactive power transfer function – standard cos φ (P)-characteristic curve
(tested according to VDE 0124-100 point 5.3.6.4)
Active power PEmax setpoint [%] 20 30 40 50 60 70 80 90 100*
Name of PGU: SHP75-10
Active power PEmax [%] 19,9 29,6 39,7 49,8 59,9 69,9 79,9 89,7 93,4*
cos φ setpoint of PEmax 1,000 1,000 1,000 1,000 0,980 0,961 0,940 0,921 0,913
cos φ measured 1,000 1,000 1,000 1,000 0,987 0,966 0,946 0,925 0,914
According to VDE 0124-100, an accuracy of cos φ 0,01 is required for testing the Reactive power transfer function. The standard cos φ-(P)-characteristic curve is respected. To provide the set point of the reactive power, active power will be reduced at 100 % P / Pn.
*For the implementation of a reactive power set point assignment, the active power is reduced.
Annex to the Certificate of Conformity self-generation unit No. U18-0168
Seite 4 von 7
F.3 Requirements for the test report for power generation units
Extract from the test report for unit certification Nr. 14TH0075-VDE-0124-100_1
„Determination of electrical properties“
Switching operations
(tested according to VDE 0124-100 point 5.1.2)
Switch-on without specification (to the primary energy source) ki 0,03
Switch-on at auxiliary conditions (of the primary energy source) ki 0,08
Switch-off for nominal capacity ki 0,14
Worst value of all switching operations ki 0,14
Flicker
(tested according to VDE 0124-100 point 5.1.3)
Line impedance angle ψk: 32°
System flicker coefficient cψ: 2,594
Annex to the Certificate of Conformity self-generation unit No. U18-0168
Seite 5 von 7
F.3 Requirements for the test report for power generation units
Extract from the test report for unit certification Nr. 14TH0075-VDE-0124-100_1
„Determination of electrical properties“
Harmonics
(tested according to VDE 0124-100 point 5.1.4)
P/Pn [%] 5 10 20 30 40 50 60 70 80 90 100
Order Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%]
1 4,89 9,82 19,62 29,38 39,10 48,77 58,42 68,96 78,52 88,05 100,36
2 0,14 0,19 0,35 0,33 0,32 0,32 0,35 0,37 0,39 0,41 0,47
3 0,04 0,05 0,05 0,05 0,05 0,05 0,05 0,07 0,08 0,08 0,39
4 0,04 0,05 0,10 0,06 0,06 0,07 0,09 0,11 0,11 0,12 0,19
5 0,02 0,03 0,04 0,04 0,04 0,04 0,04 0,04 0,04 0,05 0,11
6 0,02 0,02 0,03 0,02 0,02 0,03 0,03 0,03 0,03 0,04 0,10
7 0,03 0,03 0,06 0,07 0,06 0,05 0,05 0,05 0,05 0,05 0,07
8 0,02 0,02 0,05 0,04 0,03 0,02 0,02 0,02 0,02 0,02 0,07
9 0,04 0,04 0,07 0,07 0,07 0,07 0,06 0,07 0,08 0,08 0,10
10 0,01 0,01 0,01 0,03 0,03 0,02 0,02 0,02 0,02 0,02 0,05
11 0,05 0,07 0,06 0,14 0,16 0,14 0,13 0,11 0,11 0,10 0,10
12 0,01 0,01 0,01 0,01 0,02 0,02 0,02 0,02 0,02 0,02 0,04
13 0,05 0,07 0,09 0,11 0,16 0,16 0,14 0,13 0,12 0,12 0,10
14 0,01 0,01 0,02 0,01 0,02 0,02 0,01 0,01 0,01 0,01 0,03
15 0,02 0,02 0,02 0,02 0,02 0,03 0,03 0,03 0,04 0,04 0,04
16 0,01 0,01 0,02 0,01 0,02 0,02 0,02 0,02 0,01 0,01 0,02
17 0,03 0,05 0,13 0,08 0,13 0,18 0,19 0,19 0,18 0,18 0,15
18 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02
19 0,02 0,04 0,05 0,07 0,09 0,12 0,14 0,15 0,14 0,14 0,11
20 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02
21 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02 0,02 0,02 0,03
22 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02
23 0,01 0,02 0,02 0,07 0,06 0,07 0,08 0,09 0,09 0,09 0,07
24 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02
25 0,02 0,02 0,04 0,06 0,05 0,06 0,06 0,07 0,07 0,08 0,06
26 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02
27 0,01 0,01 0,01 0,01 0,01 0,02 0,02 0,02 0,02 0,02 0,03
28 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
29 0,01 0,01 0,01 0,03 0,04 0,04 0,04 0,04 0,04 0,05 0,04
30 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
31 0,01 0,01 0,01 0,02 0,04 0,04 0,04 0,04 0,04 0,04 0,03
32 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
33 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
34 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
35 0,01 0,01 0,01 0,01 0,03 0,03 0,04 0,04 0,03 0,03 0,02
36 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
37 0,01 0,01 0,01 0,01 0,02 0,02 0,03 0,04 0,03 0,03 0,02
38 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
39 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02 0,01
40 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
Annex to the Certificate of Conformity self-generation unit No. U18-0168
Seite 6 von 7
F.3 Requirements for the test report for power generation units
Extract from the test report for unit certification Nr. 14TH0075-VDE-0124-100_1
„Determination of electrical properties“
Inter-harmonics
(tested according to VDE 0124-100 point 5.1.4)
P/Pn [%] 5 10 20 30 40 50 60 70 80 90 100
f [Hz] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%]
75 0,23 0,21 0,20 0,19 0,20 0,20 0,21 0,22 0,22 0,22 0,53
125 0,29 0,31 0,33 0,30 0,28 0,27 0,26 0,25 0,26 0,27 0,51
175 0,19 0,24 0,28 0,21 0,20 0,20 0,20 0,21 0,20 0,21 1,67
225 0,14 0,15 0,17 0,16 0,18 0,19 0,20 0,21 0,23 0,25 0,30
275 0,06 0,06 0,08 0,08 0,09 0,09 0,09 0,09 0,09 0,08 0,47
325 0,11 0,10 0,11 0,12 0,13 0,14 0,14 0,15 0,17 0,19 0,28
375 0,03 0,02 0,03 0,04 0,03 0,03 0,03 0,03 0,03 0,04 0,13
425 0,05 0,06 0,07 0,07 0,07 0,07 0,08 0,08 0,09 0,10 0,18
475 0,02 0,02 0,03 0,02 0,02 0,02 0,02 0,02 0,03 0,03 0,24
525 0,06 0,06 0,07 0,06 0,06 0,07 0,07 0,08 0,09 0,10 0,13
575 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,03 0,07
625 0,07 0,07 0,06 0,07 0,08 0,08 0,09 0,10 0,11 0,12 0,15
675 0,02 0,02 0,03 0,02 0,02 0,02 0,03 0,03 0,03 0,03 0,05
725 0,03 0,03 0,03 0,03 0,03 0,03 0,04 0,04 0,05 0,05 0,08
775 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,03 0,03 0,03 0,07
825 0,01 0,01 0,02 0,01 0,01 0,01 0,02 0,02 0,02 0,02 0,05
875 0,02 0,01 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,03 0,05
925 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,03
975 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02 0,03
1025 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,04
1075 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,05
1125 0,01 0,01 0,01 0,01 0,01 0,01 0,02 0,02 0,02 0,02 0,04
1175 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,03
1225 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,03 0,03 0,03 0,04
1275 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02
1325 0,01 0,01 0,01 0,01 0,01 0,01 0,02 0,02 0,02 0,02 0,03
1375 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,03
1425 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02
1475 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,03
1525 0,01 0,01 0,01 0,01 0,01 0,02 0,02 0,02 0,02 0,02 0,03
1575 0,02 0,02 0,02 0,02 0,02 0,02 0,03 0,03 0,03 0,04 0,05
1625 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,03 0,03
1675 0,04 0,04 0,04 0,04 0,04 0,05 0,05 0,05 0,06 0,06 0,07
1725 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02 0,02 0,02 0,03
1775 0,03 0,03 0,03 0,03 0,03 0,03 0,04 0,04 0,04 0,05 0,05
1825 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,03 0,03 0,04
1875 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,03 0,03 0,04
1925 0,01 0,01 0,02 0,01 0,02 0,02 0,02 0,02 0,02 0,02 0,03
1975 0,04 0,04 0,03 0,04 0,04 0,04 0,04 0,04 0,04 0,05 0,06
Annex to the Certificate of Conformity self-generation unit No. U18-0168
Seite 7 von 7
F.3 Requirements for the test report for power generation units
Extract from the test report for unit certification Nr. 14TH0075-VDE-0124-100_1
„Determination of electrical properties“
Higher frequencies
(tested according to VDE 0124-100 point 5.1.4)
P/Pn [%] 5 10 20 30 40 50 60 70 80 90 100
f [kHz] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%] Ih [%]
2,1 0,06 0,06 0,06 0,06 0,07 0,07 0,07 0,08 0,08 0,08 0,09
2,3 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,05 0,06 0,06 0,07
2,5 0,05 0,05 0,06 0,05 0,05 0,05 0,05 0,06 0,06 0,06 0,06
2,7 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,03 0,04 0,04
2,9 0,02 0,02 0,02 0,02 0,03 0,03 0,02 0,02 0,02 0,02 0,03
3,1 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,03
3,3 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,02 0,03
3,5 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02 0,02 0,02 0,03
3,7 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02 0,02 0,02 0,02
3,9 0,01 0,01 0,01 0,01 0,01 0,01 0,02 0,01 0,02 0,02 0,03
4,1 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02
4,3 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,02
4,5 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
4,7 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
4,9 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
5,1 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
5,3 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
5,5 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
5,7 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
5,9 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
6,1 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
6,3 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
6,5 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
6,7 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
6,9 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
7,1 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
7,3 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
7,5 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
7,7 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
7,9 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
8,1 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
8,3 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
8,5 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
8,7 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
8,9 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01 0,01
Note: The reference current is 108,7A. The harmonic values are average values from all phases.
Page 1 of 2
Certificate of conformity NS protection
Manufacturer / applicant: SMA Solar Technology AG
Sonnenallee 1
34266 Niestetal
Germany
Type of grid and plant protection:
Integrated NS protection
Assigned to generation unit type:
SHP75-10
Firmware version: 1.90
Connection rule: VDE-AR-N 4105:2011-08 – Power generation systems connected to the low-voltage distribution network
Technical minimum requirements for the connection to and parallel operation with low-voltage distribution networks.
Applicable standards /
directives:
DIN VDE V 0124-100 (VDE V 0124-100): 2012-07 – Grid integration of power generation systems – low voltage
Test requirements for power generation units to be connected and operated parallel with the low-voltage distribution networks
The above mentioned grid and plant protection has been tested and certified according to the test guideline VDE 0124-100. The electrical properties required in the connection rule are satisfied.
Setting values and disconnect times
Properly functioning functional chain "NS protection – interface switch"
Technical requirements of the switching device
Active detection of stand-alone power systems
Single-fault tolerance
The certificate contains the following information:
Technical specifications of the NS protection and corresponding power generation types
Setting values of the protection functions
Trip values of the protection functions
BV project number: 14TH0075-VDE-0124-100_1
Certificate number: U18-0270
Date of issue: 2018-05-16
Certification body
Holger Schaffer
(A partial representation of the certificate requiresthe written permission of Bureau Veritas Consumer Products Services Germany GmbH)
Certification body of Bureau Veritas Consumer Products Services Germany GmbH Accredited according to DIN EN ISO/IEC 17065
Annex to the Certificate of Conformity self-generation unit No. U18-0270
Page 2 of 2
F.4 Requirements for the test report for the NS protection
Extract from test report for NS protection Nr. 14TH0075-VDE-0124-100_1
“Determination of electrical properties”
NS protection as integrated NS protection
Manufacturer / applicant: SMA Solar Technology AG
Sonnenallee 1
34266 Niestetal
Germany
Type of grid and plant protection: Integrated NS protection
Assigned to generation unit type: SHP75-10
Firmware version: 1.90
Integrated interface switch: Type of switching equipment 1: Relay ABB AE75-30-00 65V DC
Type of switching equipment 2: Relay ABB AE75-30-00 65V DC
Measurement period: 2018-03-12 to 2018-03-22
Protection function Setting value Trip value Disconnection time a
Voltage drop protection U < 318 V 318,8 V 192 ms
Rise-in-voltage protection U> 438 V - 468 sb
Rise-in-voltage protection U>> 458 V 457,2 V 195 ms
Frequency decrease protection f< 47,50 Hz 47,50 Hz 199 ms
Frequency increase protection f> 51,50 Hz 51,50 Hz 195 ms
a proper time of interface switch 15 ms b longest disconnection of the rise-in-voltage protection as a moving 10-minute-average, tested according clause 5.4.5.3.3 measurement a) of VDE 0124-100
The disconnect time (sum of trip time of grid and plant protection and delay time of interface switch) must not exceed 200 ms.
A check of the overall functional chain "NS protection – interface switch" resulted in a successful disconnection.
The above mentioned grid and plant protection with the assigned power generation units has met the requirements for islanding detection with the help of the active method (resonant circuit test).
The above mentioned NS protection meets the requirements for synchronization.
Top Related