We Supply Amfor flushable anode Cell used in electro coating
(ED) paint system with most types of paint. It serves as the opposition
electrode and simultaneously removes solubilizer (usually a common
organic acid) from the paint to maintain chemical balance. Anode
cell's anolyte injection systems distribute the anolyte evenly across
the anodes in anocel box and semi-circular. And the delivery system
in Anocel tubular cells increases dirt and oxygen removal by a
minimum factor of three over conventional designs.
CIRCULAR ANODE MEMBRANE CELLS
·
·
·
·
·
Safe and Esay Handing
Hard to Damage Design
Low Electrical Resistance
Quick and Easy Inspection
Procedure
Maintenance Friendly
Advantages
CED Accessories
ELECTRIC TERMINAL
ELECTROLYTE SUPPLY HOSE
ELECTRODE SS316MEMBRANE
P.P. PERFORATED PIPE
PROTECTIVE COVER CLOTH
ELECTROLYTEOUTLET
ACID MIGRATION ELECROLYTE FLOW
Pre-engineered and factory assembled package systems for circulating anolyte through the Cells (each Cell requires 2 to 3.6 lpm)
Includes:
Tanks: 304 SS or Polypropylene tanks from 120 to 300 Litres.
Pump: Sealless Magnetic Drive Polypropylene or CPVC pumps from 40 to 280 lpm with safety features.
Conductivity monitor/controller and solenoid valve for deionized water addition.
Ultraviolet Rays Bacterial disinfection system prior to discharge.
PN 16 U - PVC anolyte supply piping with flow control valve, check valve, bypass, and SS pressure gauge.
Drain valve, low level switch, and anolyte return filter
·
·
·
·
·
·
ANOLYTE CIRCULATION SYSTEMS:
3 Separation SystemsYour Purification Partner
3 Separation SystemsYour Purification Partner
Ultrafilters +
Electrophoretic
Electrocoating
Membranes
Anolyte Circulation
Instrumentation
105, Vakharia Industrial Estate
Ram Mandir Road, Goregaon (W)
Mumbai - 400104, INDIA.
Tel : +91-22-32201863
Cell: +91-98923 45754
www.separationsystems.in
3 Separation SystemsYour Purification Partner
System Includes :
·
·
·
·
·
·
·
·
·
·
Membranes : 4” & 8” High Flow PVDF
Membrane Housings: High Grade PVC/ SS
Automation :Control Panel with/without PLC
Pumping: Feed/Cleaning Pressure Pumps
CIP : 'Cleaning In Place' PP Tank for Membrane
Filtration: Bag Filters – S.S./PP Fabricated
Monitors: Pressure Monitors – Glycerin Filled
Flow Monitors - Digital & Rotameter
Switches: Pressure Switches
Level Switches
Piping: Std PVC/ PVC-U - +George Fischer+ or Equivalent
Stainless Steel - Fabricated.
Frame : S.S./ M.S. Powder Coated
Features :
System Construction
Clean In Place (CIP) System
Bag Filters
Frame
We designs systems to produce 10 lpm (2.5 gpm) +/- 10% from each 8” (8040) UF element. The system is manufactured to provide reliable, steady long-term performance, the customer avoids the frustration of unexpected system performance after start-up. Our systems are robust — an element can be taken off line for cleaning, replacement, or “rest” without placing stress on the remaining elements.
Our CIP has superior design features that make for reliable performance. A Flush and Drain valve is part of the clean return piping, allowing heavier paint solids to flow back to the ED tank and not into the CIP clean tank, thus saving paint solids. A low level switch installed inside the CIP tank will stop the pump when the tank's liquid level is below minimum tank depth to protect the pump from cavitations. The CIP is included with a solenoid valve also for DI water flow. UF membranes are also protected by a filter bag vessel installed in the CIP piping that removes dirt from the cleaning solution before it flows back into the UF Elements.
Our systems include individual bag filters (one filter for each Element), each with its own isolation valve(s). This is a standard feature with 2 membrane system also. So that bag filters can be serviced without interrupting paint flow to any Element. The use of several bag filters provides a duplex system where filtered paint is always being sent to the UF Elements.
The sturdy powder-coated frame is constructed to support the piping and UF Housings during shipment and operation at your plant
Optionals :
Cooling Coil
Process Instrumentation
Filter Bag & Housings
Deionization Plants
1 inch stainless steel serpentine coil cools cleaning solution, increasing cleaning cycle time by as much as one additional hour.
Digital Pressure Sensor - Conductivity meter - pH meter - Analog Temperature Gauge - Total Permeate flowmeter - Bypass Valves and Piping, and other process gauges can be installed on the UF System upon requested
We provide Clamping system Bag filter housing even standard swing bolt type vessels are also available, with filter bags available from 10 µ to 100 µ.
Pure water production plants like reverse osmosis, Demineralization and other similar water treatment and waste water treatment products are also core area of the company.
CED Ultrafilters
3 Separation SystemsYour Purification Partner
Features HF - 43 SW - 4020 SW - 4040
Lacquer Applications
Membrane
Membrane Make
Membrane Size
Permeate Rate(Ltrs per Hour)
Pump
Cartridge Housing
Cartridge
Pressure Guage
Piping
Polyeurahene/ Acrylic Base
Hollow Fibre
Koch, US
L : 43” D:3
60 - 75 LPH
1 hp, Lowara/ Ebara1 Phase/3 Phase
10” StandardPC
Wound/Spun10” Std
Yes
PVCStd. +GF+ or PRINCE
Polyeurahene/ Acrylic Base
Spiral Wound
Amfor, US
L : 20”
D:4”
60 - 75 LPH
1 hp, Lowara/ Ebara1 Phase/3 Phase
10” StandardPC
Wound/Spun10” Std
Yes
SS - Fabricated SS - Fabricated
Yes
Wound/Spun10” Std/Jumbo
10” Standard/JumboPC/PP
1.5 hp, Lowara/ Ebara
1 Phase/3 Phase
300 - 400 LPH
L : 40”D:4”
Amfor, US
Spiral Wound
Polyeurahene/ Acrylic Base
Optionals
Demineralization Plants Ion Exchanger Unit Cartridges/Hsg
Refractometer pH Meter Conductivity Meter
Electrophoretic Ultrafilters
Top Related