Download - CASEMENT 15 Pushout hd… · casement window applications. The standard lock bar system is available in either steel or stainless steel and allows up to four locking points on sash

15 PUSH OUT HARDWARE

20.1

When your project requires hardwarethat looks like casement window fromthe turn of the century, turn to TruthHardware for our new line of hardwarefor push-out windows which combinesthe aesthetic characteristics fromyesteryear with the performancerequirements of today.

Push-out window systems have seen aresurgence in recent times with thepopularity of timber frame, log andcraftsman style homes, and builders arealso incorporating this manual stylewindow into sidelights for doors.

Following extensive research andengineering, Truth is launching a fullline of hinges, locks and related push-out hardware to meet the requirementsof this popular market segment.

Available in both “classic” and “retro”looks, Truth’s hardware systems forpush-out windows are designed to meetyour historic application needs.

LOCK BAR SYSTEMS

Truth has designed two types of lockbar systems – one for standard push-out windows and the other specificallydesigned for French style doublecasement window applications.

The standard lock bar system isavailable in either steel or stainlesssteel and allows up to four lockingpoints on sash heights up to 7 feethigh. With a standard backset of22mm, this lock bar is a singleintegrated unit which allows for quickinstallation by the windowmanufacturer.

The locking systems provide a range ofhandle activation heights whichpermits the manufacturer to place thehandle wherever they would like,including centered low on the windowsash to help comply with ADArestricted applications.

The French locking system is evenmore flexible since the lock drive boxis separate from the driven lock bars.This allows the upper and lower lockbars to be selected from a wide rangeof lengths and then cut to specific sizefor applications. All French lock barsincorporate a shoot bolt for addedsecurity. The French locking system isavailable in steel with a coastal platingpackage as an option.

CASEMENT

HINGES

Truth also offers special high frictionhinges which were engineered to fit thestandard hinge cavity to help provideresistance to wind moving the sashwhile in the open position. Availablein stainless steel as a standard, thesehinges are available in two sizes (10”and 14”). With egress or washabilityoptions to choose from, these hingesuse the same snap-stud design asTruth’s standard 2-Bar hinges andoptional hinge stops are available forlarger window applications.

STAY BARS

If even more wind resistance isrequired, or the window sash is toolarge to reach the activation handle onthe lock bar system, then Truthrecommends using our sill mountedStay Bars. Available in 2 lengths, thishardware provides more stability whenopen and will assist the homeownerwhen closing a wider sash. One uniquefeature of our stay bar is the ability tohold the sash in any position and notinterfere with the closed screen.

OPTIONAL HARDWARE

Truth Hardware also offers a fullcomplement of swing screen hardwareincluding hinges which allow easyseasonal removal of the screens. Inaddition, Truth offers an assortment ofscreen handle options to complementthe sash hardware.

PRODUCT APPLICATION

ASSISTANCE:

If you are designing a new windowprofile, or are having difficultyselecting hardware for your window,please contact Truth. Our highlytrained Product Specialists can assistyou with the selection of theappropriate hardware to meet yourperformance requirements, as well asproviding personalized applicationdrawings.

WARRANTY:

Protected under the terms of the TruthWarranty for Window & DoorManufacturers & AuthorizedDistributors. Refer to Truth’s Terms &Conditions for further details.

MATERIALS:

Locking bars: Steel with zinc platingor 300 series Stainless Steel

Locking handles: High pressure zincdiecast, powder coated or decorativeplate

Hinges: 300 series Stainless Steel

Stay Bars: Solid brass with powdercoat or decorative plate

Screen Handles: High pressure zincdiecast, powder coated or decorativeplate

Screen Hinges: Solid brass withpowder coat or decorative plate

PUSH OUT HARDWARE

20.1a

FINISH:

Available in a wide range of powder

coat paint or decorative plating

ORDERING INFORMATION:

Because of the variety of push outwindow profile designs on the market,Truth suggests that you contact TruthHardware’s Product Specialists to helpyou identify the components that willbest meet your requirements and toprovide application assistance whenrequested. To assist us in helping youidentify the product that need, pleasebe prepared to provide Truth with thetype and style of profile that you aremounting your hardware to.

RECOMMENDED SCREWS:

Types of screws required determinedby material of profile used. See TechNote #11. Refer to drawings forcomplete information on screw typeand quantity needed (sold separately).

TRUTH TIPS

1. Screen hinges are designed to bedetachable to allow seasonal screenremoval, therefore orientation of thehinges must be considered whenselecting and mounting hingecomponents.

2. The Stay Bar utilizes a loose rivet atthe sash bracket to allow easy sashdisconnection for maintenance.Orientation of the sash bracket and pinmust be considered to avoid the pinfalling out and becoming lost.

3. Friction hinges and Stay barsprovide only limited resistance to winddriven sash movement. Push outwindows using this hardware shouldnot be left unattended in windyconditions.

4. A construction handle (PN 23377)is available for operation of the lockingsystems without having the decorativehandles in place.

5. The tongued version of the “classic”or “retro” handles are intended foraesthetic purposes only, they areintended to be used in conjunction witha locking bar system to carry weatherand forced entry loads applied to thesash. Use of these handles as singlepoint locks is not recommended.

6. Truth recommends that whendesigning a casement window the sashwidth should be limited to no greaterthan 66% of the sash height. A sashwidth that exceeds 66% could developsash sag over the life of the window.Refer to Truth Technical Note # 3 formore information dealing with sash sagprevention.

7. The Concealed Casement Hingewith snap stud attachment wasdesigned to be used on a casementwindow only. Under no circumstancesshould a casement hinge with a snapstud be used on an awning window

8. With the flat bottom track, screwheads will be raised above the trackwhen installed. Truth’s Delrin shoenow has a higher bridge to clear screwheads (.060” high).

9. A standard 3/8” wrench can be usedto adjust a hinge equipped with theadjustable stud, however this willrequire detaching the support armsfrom the track. To adjust this hingewithout detaching the support arms it isnecessary to use Truth’s slim-linewrench #31887

10. When selecting mounting screwsfor Truth hardware, coatingcompatibility is one of the mostimportant criteria. For best corrosionresistance the coating on the screwsshould be the same as the coating onthe hardware. For more informationsee Tech Note #11.

11. On some window designs, bindingcan be experienced on the hinge side ofthe window between the outermostedge of the sash and the jamb. Thisproblem often occurs when switchingfrom standard to and “egress” hinge.If a window system is designed towork with an “egress” hinge, thewindow system will work with allother Truth Concealed CasementHinges. When binding is encountered,three solutions are available: a) movehinge location toward outside of sash,b0 increase the clearance between thesash and jamb, and c) decrease thethickness of the sash.

INCLUDE TRUTH SPECS ON

YOUR NEXT WINDOW PROJECT

Push out window hinges shall beprovided which allow easy adjustmentof window position and maintainposition in light wind conditions. Thelocking system will provide acraftsman period aesthetic with hiddenmultiple security points. The Stay barmust allow a 90° open sash projectionand not interfere with the screen in anyposition.

Push out window hardware shall beprovided by Truth Hardware,Owatonna, MN.

PUSH OUT HARDWARE

20.1b

FIG.1CLASSICMULTI-POINT60.00.XX.001/.002

3.85

NOTE:

1.220

3.77

3.85

3.77

SCREWS: 19146 10-32 X 1 PH OH MS




1.12.67

1.70

.75

2.26

7 mm

7 mmCUSTOM LENGTHS

OFFERED

CLEARANCE HOLE IS Ø.4375

1.70

.75

1.27

2.26

1.12.67

L.H. SHOWN L.H. SHOWN

L.H. SHOWN L.H. SHOWN

.75

1.70 2.26

1.09

.79

1.70

.75

2.26

1.09.79

1.27

.34.59.90

.34.59

.90

FIG.2CLASSICSINGLEPOINT60.01.XX.001/.002

FIG.3RETROMULTI-POINT60.02.XX.001/.002 FIG.4RETROSINGLEPOINT60.03.XX.001/.002

FIG.5SPINDLE22852

PUSH OUT HARDWARE

20.1c

FIG.6LOCKBARCENTERHANDLE(SEECHARTABOVE)

"E"

"E"

3.80

.635

.430

"A"+.125

"A"-1.80

.250

"D"

Ø.219

Ø.4375

1.70

1.25

.080 +.010-.000

6.75

4.00

4.00

.47

.47

.63

.40

"A"

"B"

"C"

"C"

"D"

1.70

3.29

1.18

.12

SPINDLE HOLEFOR HANDLE

FIG.7APPLICATIONOFLOCKBARINTOSASHROUTINGANDDRILLINGPATTERN

% %%K<K%L%??MM G*N-O,%

G<!%;I.&9>J%%K<K%L%??MM G*N-O,G,23P+

MM 2N ;.II! ;;. KIK?EB 7A5F 4DE7F 4DCB? FA7?FBB 4EA@E 44A?C 4DE7E 4DCBD @A55CBB ?DAC? 47A4D 4DE7C 4DCBF 44A545BB D4AEB ?@AB4 4DE7@ 4DCBE 4EA@E4BBB D7AD@ DFA55 44AE@ 4DE75 4DCBC 47AC74?BB F@A?F F?A@C 4EAE4 4DE77 4DCB@ ?DAC?4FBB EEA44 EBAC? 47AFE 4DCBB 4DCB5 ?DAC?4CBB CDABB E5AE4 ?DAD7 4DCB4 4DCB7 ?DAC?

&9=%!I#$.G%K9K?%Q.A%

!">9.:"#;%K&K

F%Q.A%!">9.:"#;%

K>K7MM%="!!I=

PUSH OUT HARDWARE

20.1d

"B"

"C"

"C"

"D"

1.70

3.29

1.18

.12

SPINDLE HOLEFOR HANDLE

2.24

8.00

"A"6.75

4.00

4.00

.47

.47

.63

.40

.250

"D"

Ø.219

Ø.4375

1.70

1.25

.080 +.010-.000

3.80

.635

.430

"A"+.030

"A"-1.80

FIG.8LOCKBARLOW HANDLE(SEECHARTABOVE)


G<!%;I.&9>J%%K<K%L%??MM G*N-O,%G,23P+

MM 2N ;.II! ;;.CBB ?DAC? 47A4D 4D@EB 4D@CB 5ABB5BB D4AEB ?@AB4 4D@E4 4D@C4 5ABB4BBB D7AD@ DFA55 44AE@ 4D@E? 4D@C? 5ABB4?BB F@A?F F?A@C 4EAE4 4D@ED 4D@CD 5ABB4FBB EEA44 EBAC? 47AFE 4D@EF 4D@CF 5ABB4CBB CDABB E5AE4 ?DAD7 4D@EE 4D@CE 5ABB

&9=%!I#$.G%K9K?%Q.A%

!">9.:"#;%K&K

F%Q.A%!">9.:"#;%

K>K7MM%="!!I=

PUSH OUT HARDWARE

20.1e

FIG.10KEEPER-JAMB23230

.38

.09 TYP.

.29

.55

.25

.25

.25

.75

.50

1.75

.37

.25

.28

2.75

.72

.15

.181.94

.42

1.54

2X .24

1.75

2X .25

.35

2X .25

.39

2X .18

.12

.57

.09 TYP.

.07

NOTE: ALSO FUNCTIONS AS SHOOT BOLT KEEPER

SCREWS: 19240 - 8 X 1 PH FH SMSSCREWS: 19240 - 8 X 1 PH FH SMS

SCREWS: 19240 - 8 X 1 PH FH SMS


.37

.28

.75

1.92

2X .21

.12

3.62

.82

.27

.40

SCREWS: 19110 - 7 X 3/4 PH FH SMS

2X .25

2X .41

2.02

2X .37

.07

.05

.502X .34

2.94

COLOR: BLACK

NOTE: FITS BELOW 23323 SHOOT BOLT KEEPER

1.50

1.00.25

.29.57

Ø.44.10

.41

.54

FIG.11KEEPER-JAMB23321

FIG.12SHOOTBOLTKEEPER23323 FIG.13KEEPER-JAMB33004

FIG.14SHOOTBOLTINSERT23298 FIG.15KEEPER-SINGLEPOINT30569

PUSH OUT HARDWARE

20.1f

FIG.16FRENCHLONGLOCKBOX13485

LOCK BAR

1.403

3.75

6.06

2X .843

1.875

[22].866

.237

2.18

LOCK BAR

6.500

1.228

.6253.250

2X .838

.475

.100

6.100

[22].866

.29

.785

.630



.800

3.23

AMOUNT OF TRAVEL

AMOUNT OF TRAVEL

SLIDE CLIPS OUTTO COVER LOCK BAR

LOCK BAR COVER INCLUDED

.628

.254 .916

.255

FIG.17FRENCHSHORTLOCKBOX7COVER13875

PUSH OUT HARDWARE

20.1g

.63

"A"-.160

6.78

.635

.430

.250

[22 mm].866

Ø.219

Ø.4375

1.68

1.25

.080 +.010-.000

.40

"A"

"D"

"I"

6.500

"B"

"C"

"E"

"F"

"G"

"H"

"B"

.570

.570 2.360 .093

2.360 .093

2.0061.178

.667

FIG.18FRENCHCASEMENTLOCKBAR-LONGBOX(SEECHARTABOVE)


!"# !$%!! $% $% &'(()& %'*&'(()&

+,-.+ +/. 0.-10 2-00 013/. 014/5 01-20 4-0, 0-3,1,-+/ 15. 02-41 0.-+1 013/0 014,. 03-/1 5-1. 0-3, /-534,-1/ 2+. +.-43 02-+3 013/+ 014,0 +1-/3 04-+0 0-3, 2-,. 0+-.42,-,/ /2. +2-/3 +.-43 013/1 014,+ +3-33 05-44 0-3, 3-1/ 0,-+//,-3/ ,3. 1.-,1 +2-21 013/4 014,1 11-51 4-13 +4-/2 +-./ 0+-0+ ++-1/,3-0+ 50. 12-3/ 1.-// 013/2 014,4 15-./ 4-+1 +5-/1 +-./ 04-/3 +,-4,33-13 0.4. 4.-55 12-,5 013// 014,2 44-05 4-13 14-35 +-./ 0,-++ 1+-2/

676 686 696 6$6

:":9*:$;)*6"6******

9<=>?@*A@=B@C@>

D"&*()%8E9*************************************6D6 ('AF*G'$%E*9)$89E*********************6A6

9"%H()*9)$89E*6H6

('AF$%8*************G'$%E:

:A&)I*******************************************9'():

5!!6)6

PUSH OUT HARDWARE

20.1h

.570

"D"

.63

.570

"B"

"I"

2.85

.635

.430

"E"

"F"

.250

[22 mm].866

Ø.219

Ø.4375

1.68

1.25

.080 +.010-.000

.40

"A"

"G"

"A"-.160

"B"

3.750

"H"

"C"

2.0061.178

.667

2.360.093

2.360 .093

FIG.20FRENCHCASEMENTLOCKBAR-SHORTBOX(SEECHARTABOVE)


!"# !$%!! $% $% &'(()& %'*&'(()&

+,-./ +01 21-.2 3-22 2./01 2.,04 2+-24 ,-25 2-/5.,-02 .41 23-,. 21-+. 2./02 2.,51 25-.2 4-.1 2-/5 0-4/,,-,2 3+1 +1-,/ 23-+/ 2./0+ 2.,52 ++-+2 2,-+2 2-/5 3-51 2+-1,33-2 031 +3-0/ +1-,/ 2./0. 2.,5+ +5-33 24-,, 2-/5 /-.0 25-+003-+2 5/1 .1-5. +3-3. 2./0, 2.,5. .+-02 ,-./ +,-03 +-10 2+-2+ ++-.053-,0 421 .3-/0 .1-00 2./03 2.,5, .5-5. ,-+. +4-0. +-10 2,-0/ +5-,5/3-5+ 21,1 ,1-44 .3-54 2./00 2.,53 ,+-/0 ,-./ .,-/4 +-10 25-++ .+-30

6"67*6$8)*9"9******

7:;<=>*?>;@>A><

B"&*()%CD7*************************************9B9

9$9

('?E*F'$%D*7)$C7D*********************9?94!!

7"%G()*7)$C7D*9G9

('?E$%C*************F'$%D6

6?&)H*******************************************7'()6

9)9 9I9 9C9 979

PUSH OUT HARDWARE

20.1i

FIG.22SCREENHINGE-METAL29.20.XX.00/.002

L.H. SHOWN

1.50

.75

2.00

1.50

.25

.25

SCREWS: 19051 - 6 X 1 T17 PH FH SMS

L.H. SHOWN

1.021.03

LOOSE PIN

.50

.65

1.25

SCREWS: 1914610-32 X 1 PH OH MS

SCREW INCLUDED: 8-32 X 1 PH/SL TH MS

SCREWS: 19187 - 7 X 1 T17 PH FU SMS

.58.30

.70

1.00.50

.25

.88

.31

.25

.03

3.98

1.80

.62

1.24

.62

.28

.31

.68

.89

.69

.15

L.H. SHOWN

.06

.24

FIG.23SCREENHINGE-WOOD29.21.XX.001/.002

FIG.24SCREENKNOB13301.XX FIG.25SCREENPULL41678.XX/41679.XX

PUSH OUT HARDWARE

20.1j

FIG.2612.81STAYBAR

2.12

12.81.XX.00112.81.XX.002

"A"

"B"

"A" "B"17.0012.00

12.007.00

PART NUMBER

.93

SCREWS: #8 X 1 FH WS (QTY:2(INCLUDED) #8 X 1.5 FH WS (QTY:4)

1.00

1.25

.61

PUSH OUT HARDWARE

20.1k

FIG.2712.81STAYBAR

.875

4X .35

4X .30

1.500

2X .401.25

2X 1.002X 1.15

4X .19

15.40

2.12

.80.80

.93

.39

"B"

"A"

PIN IS REMOVABLETO DISCONNECT SASH

.93

12.81.XX.00112.81.XX.002

"A" "B"17.0012.00

12.007.00

PART NUMBER

2.00

2X .252X .27

.54

1.00

.625.50

PUSH OUT HARDWARE

20.1l

FIG.2814.61FRICTIONHINGE14”-STANDARDWASH

OPTIONALSTOP 33045

1.2505.250

9.25013.625

1.25

2.625

4.25

7.19

.7180

.4430

LEFT HAND SHOWN

RECOMMENDED SCREWS: (LENGTH AND THREAD TYPEDETERMINED BY PROFILE) FOR SASH ARM:(QTY:8) #7 X 3/4 FH SMS FOR TRACK:(QTY:8) #7 X 3/4 FU SMS SST

86° MAX.

6.5660

PUSH OUT HARDWARE

20.1m

FIG.2914.60FRICTIONHINGE10”-STANDARDWASH

1.2545.254

9.629

1.25

2.625

4.94

7.19

OPTIONALSTOP33047(LH)33048(RH)

85° MAX.

5.2460 .7180

.4430

LEFT HAND SHOWN


PUSH OUT HARDWARE

20.1n

FIG.3014.60FRICTIONHINGE10”-EGRESS

1.2505.250

9.625

1.25

2.945

4.94

7.19

84.5° MAX.

2.648OPTIONALSTOP 33045

.7180

.4430

LEFT HAND SHOWN


PUSH OUT HARDWARE

20.1o 700 WEST BRIDGE STREET, OWATONNA, MN 55060 n 507.451.5620 800.866.7884 n TRUTH.COM

%

% % % %

678%9'.(## 6:);7)77)77<=77; 6:);7)77)77>=77? @2%A."BC%*$2&# 6? D? EF G2HH(.B,"3678%9'.(## 6:);7)77)77<=77; 6:);7)77)77>=77? @2%A."BC%*$2&# E7 :E EF I(#,J(0/"36:8%K"#+ 6:);6)77)77<=77; 6:);6)77)77>=77? @2%A."BC%*$2&# E: :; :> G2HH(.B,"36:8%K"#+ 6:);6)77)77<=77; 6:);6)77)77>=77? @2%A."BC%*$2&# E; <: :> I(#,J(0/"3678%K"#+ 6:);7)77)776=77E 6:);7)77)77D=77: @2%A."BC%*$2&# E: <: <: G2HH(.B,"3678%K"#+ 6:);7)77)776=77E 6:);7)77)77D=77: @2%A."BC%*$2&# E? <; <: I(#,J(0/"3678%K"#+ 6:);7)77)776=77E 6:);7)77)77D=77: DD7:>=? D: ;7 ?E G2HH(.B,"3678%K"#+ 6:);7)77)776=77E 6:);7)77)77D=77: DD7:>=? D; ;; ?E I(#,J(0/"3678%9'.(## 6:);7)77)77<=77; 6:);7)77)77>=77? DD7:< D; ;; F7 G2HH(.B,"3678%9'.(## 6:);7)77)77<=77; 6:);7)77)77>=77? DD7:< D; >E F7 I(#,J(0/"36:8%K"#+ 6:);6)77)77<=77; 6:);6)77)77>=77? E;667 D; >E 677 G2HH(.B,"36:8%K"#+ 6:);6)77)77<=77; 6:);6)77)77>=77? E;667 D? >; 677 I(#,J(0/"3

!"#$%%&#''$'()*+%#,)-%.!/0%

'12#3#!1456#'77%289/##:.;

,&"07#<7%=

(>?(#@A>B!>C;#:<,(C<!#(>;?D#E,&4)*9%77#,&%%9#)7#,&4*=41=F $4G)2H2#A%5"22%*=%=#E747IF

J)=&I#E)*KF (%)+I&#E)*KFJ%)+I&#E987F

LM#'12#'77%289/##:.;

FIG.31HINGESASHSIZETABLE