8/22/2019 Bhavani Industries
1/11
INDUSTRIAL VISIT REPORT
ON
BHAVANI INDUSTRIAL
V.P.M.P. POLYTECHNIC
We are studying in three year diploma coerces todaywe are in 3rd semester in MECHANICAL Department in
8/22/2019 Bhavani Industries
2/11
This semester we studying the subject ofMANUFACTURING PROCESS 1 (MP-1) Follow thissubject. We are visited to the BHAVANIINDUSTRIES in HIMMATNAGAR on with the Lecturer
of Mechanical department on this subject we areprepares a project report on Work Shop on Following.
INTRODUCTION
We are visited to the BHAVANI INDUSTRES on
Himmatnagar this Industries make a S.S. & M.S. Parts
of machine & Engine parts to make a finishing,Cutting, lathing, Milling, etc. This is a Medium Scale
unit.
There are some products of machine of in Bhavani
Industries.
Lathe Machine
ALL-GEARED-LATHE-MACHINE
CNC-Lathe Machine
Medium Duty Machine
Milling Machine
Hacksaw Machine
Shaping Machine
Drill Machine
8/22/2019 Bhavani Industries
3/11
Threading Machine
LATHE MACHINE
8/22/2019 Bhavani Industries
4/11
8/22/2019 Bhavani Industries
5/11
Lathe machine is used to make a finished material
and Removing to the outer matel of the component &
Part of machine.
Mounted on a small lathe can be adjusted to turnoutside or inside tapers on work mounted betweencenters or in a chuck for taper boring. Attachment ismade entirely from stock materials. Turning a taperby offsetting the tailstock of the lathe is a commonpractice but the method has several disadvantages.In turning a taper by offsetting, the lathe centers areout of alignment which can result in inaccuracies due
to burring of the center holes in the work, alsopossible scoring of the lathe tail center. Only workmounted between centers can be tapered by theoffset method; taper boring cannot be done. In smallshops where the amount of taper work does notwarrant the outlay for a conventional taperattachment, it is possible, using stock materials, tomake one to fit nearly all small lathes. The taper
attachment in this set of plans was made to fit a 9-inch lathe. As a rule, the parts dimensioned will besuitable for various makes of 9-in. lathes andpossibly those of slightly larger or smaller swing.
8/22/2019 Bhavani Industries
6/11
Milling Machine
As with all the different machine tools and machining operations, theaccessories that are used along with the machine play in important
role in machine tool operation. Most of the accessories you will seewithin this information sheet pertain to the vertical milling machine,
although there are some accessories that can be used on other types
of machines as well.
If using a solid collet do nottighten the set screw medgefinder shank will ruin it. The edgefinder should
spinning edge finder is brought into contact with th
eccentricity gradually disappears. When the head ofwith the body, slow your table movement to 0.001 o
kicks out, the edge of the part is located and the spin
of the head of the edgefinder away from the edge of
8/22/2019 Bhavani Industries
7/11
8/22/2019 Bhavani Industries
8/11
Figure 4: Vertical Milling Machine Head Contr
Quill Feed Selector-This crank is used tfeed. The feed rates include 0.0015", 0.0
8/22/2019 Bhavani Industries
9/11
rates.
Power Feed Engagement Lever-This l
gear. When the lever is in the proper posengaged.
Feed Reverse Knob-The position of thisdirection. The quill feed reverse knob pos
direction. The three positions of the knobmiddle position is the neutral position. Ch
workpiece before engaging the power fee
DRILLING MACHINE
Drill machine is useful to shape a hollow part or
a small hole on drilling machine there are one motor
8/22/2019 Bhavani Industries
10/11
on a head of the machine parts and that connected
to the shaft of the drill chack
8/22/2019 Bhavani Industries
11/11
Top Related