www.krisbow.com 1www.kawanlama.com
2 www.kawanlama.com
MANUAL ROTARY MACHINE
SMALL ROTARY MACHINE
IM3
TXL
M20 M40 M40G
Specifications : IM3 TXL
PackagingSize : 580 x 510 x 280 mmNet weight : 11 kgGross weight : 13,6 kg
Size : 770 x 620 x 660 mmNet weight : 50 kgGross weight : 66 kg
PantographNumber of reduction ratios 25character reduction from1/2 To 1/7
Number of reduction ratios 25character reduction from1/2 To 1/7
Spindle and spindle motor power
Motor technology : universalSpindle rotation 18000 r.p.m.Cutter diameter 3.17 mm
Motor technology :asynchronous motorRotary speed 1 : 9500 r.p.m.Rotary speed 2 : 18000 r.p.m.Speed change :Manual by pulley/beltCutter diameter 4.36 mm
Engraving depth
Depth setting micrometric vernier with depth Regulating nose,Precision 0.025 mm
Setting micrometric indexPrecision 0.025 mm
Table Copy slide 150 x 405 mm Copy slide 150 x 405 mm
Optional accessories
• Special holding jigs• Vice for cylindrical items 65 mm ø• Depth regulating noses• Copy slides• Over 40 character fonts
• 500 mm tubular pedestral• Cup vice for cylinders up to Diameter 200 mm• Large-capacity vice for plates up to 335 mm in width• Prehension jigs• Depth regulating noses• Copy slides• More than 40 international character fonts availables
Specifications : M20Machine size/dimensions 310 X 340 x 310 mm
PowerConsumption 180 Watt
Spindle
- Diameter 3,17 mm hollow shaft (Gravograph patented innovation)- Brushless motor 20000 rpm- Spindle pressure adjustment
Weight Machine : 10 kgEngraving area 100 X 100 mm
Z Stroke30 cmClearance (nose to bottom of vice) : 40 mm
Self centering vice
Max opening capacity : 105 mm
Flatness 0.1 mm
Repeatibility 0.05 mmPen attachment Maximum diameter : 20 mm
Noise level
- Standby : LA eq = 51 dB(A) (± 1)- Engraving = LA eq = 69 dB(A) (± 2)- Peak in engraving Lp cpeak = 89 dB(C)
Specifications : M40 M40GMachine size/ dimensions 550 X 510 x 320 mm 730 X 540 x 540 mm
Engraving area 305 X 210 mm (A4+) 305 X 210 mm (A4+)
Weight Vice version : 18 kgTable version : 19 kg Machine : 35 kg
Z Axis
40 mm- Vice : unlimited x 5 x 21 cm- Table : 33 x 3.5 X 26 cm
40 mm- Motorized vice : 45 x 24 x 19 cm- Cylinder : ø 17 cm- Length : 45 cm- Cone : ± 10º
PowerConsumption - 125 Watt - 125 Watt
Sound level
- Off load : LA eq dB(A) < 73- Nominal engraving : LA eq dB(A) 80+/- 2- Peak when engraving : Lp cpeak dB (C) < 95
- Off load : LA eq dB(A) < 73- Nominal engraving : LA eq dB(A) 80+/- 2- Peak when engraving : Lp cpeak dB (C) < 95
Accessories
• Vice • Flat work table• Pen attachment• Range of jigs• Range of depth regulating noses• Chip collector
• Pen engraving device• Range of jigs• Range of depth regulating noses• Chip collector
www.krisbow.com 3www.kawanlama.com
MEDIUM ROTARY MACHINE
IS400 IS400 Volume
IS200IS200 TX
Specifications : IS200 / IS200 TX IS400 IS400 VOLUME
X and Y Axes Engraving area : 80 x 225 mm Engraving area : 305 x 210 mm Engraving area : 305 x 210 mm
Z Axis
Spindle travel 15 mmSpindle travel at bottom of vice :48 mm (IS200), 210 mm(IS200 TX)
Spindle travel 40 mmSpindle travel at bottom of vice120 mmMax. spindle travel with clamping table 33 mm
Spindle travel 40 mmMax. spindle travel at bottom of vice400 mm
PowerConsumption 90 Watt 300 Watt 300 Watt
SpindleTool diameter 4.36 mmRotation speed 17000 rpmMotor power : DC 20 W
Tool diameter 4.36 mmRotation speed 11-20000 rpmMotor power : DC 70 W
Tool diameter 4.36 mmRotation speed 11-20000 rpmMotor power : DC 70 W
PackagingNet weight : IS200 : 22 kg IS200 TX : 52 kg
Net weight : 50 kg Net weight : 90 kg
Noise level
Empty : LA eq dB(A) < 60 ±1When engraving : LA eq dB(A) 81 ±2Peak when engraving :Lp cpeak dB(C), <105In accordance with gravograph standards
Empty : LA eq dB(A) < 72 ±1When engraving : LA eq dB(A) 80 ±2Peak when engraving :Lp cpeak dB(C), <95In accordance with gravograph standards
Empty : LA eq dB(A) < 72 ±1When engraving : LA eq dB(A) 80 ±2Peak when engraving :Lp cpeak dB(C), <95In accordance with gravographstandards
Optional accessories
• 15 mm diameter pen vice• Jewellery vice and prehension jigs• Range of spindles and depth regulating noses• Divider ice for cylinders with maximum diameter 200 mm• Range of mandrel and cones for cylinder prehension• Glass engraving kit
• 380 X 280 mm clamping table• Volume base and 350 mm ø cylinder drive• 15 mm ø pen drive• 120 mm ø cylinder drive• Glass engraving kit• Range of spindles (Collet, diamond, HF)• Relay kit box• Lubrication system
• Clamping table• 15 mm ø pen drive• 120 mm ø cylinder drive• 350 mm ø cylinder drive• Glass engraving kit• Range of spindles (Collet, diamond, HF)• Automatic input / output control• Lubrication system
4 www.kawanlama.com
IndustrialLARGE ROTARY MACHINE
IS900
Specifications : IS900
X & Y Ax1s
- Engraving Area 635 X 432 mm- Table Surface 660 X 450 mm- Flatness Tolerance 0.2 mm Maximum Clearance In Y axis Unlimited- Maximum Engraving Speed 100 mm/S Max. Dimension Of The Item To Be Engraved
Z Axis- Spindle Travel 80 mm- Spindle Clearance With Clamping Table 80 Mm
Spindle
- Tool Diameter 4.36 mm- Rotation Speed 13-20000 rpm- Servo Motor 90W Advanced Functions As Standard- Automatic Z Ref- Point & Shoot- iQ+ Terrain Follower
Clamping Device Aluminum T-Slot Table Streamlined Clamping
Noise Level
- Respects Iso 11201- Empty * La Eq Db(A) <72±1- When Engraving * La Eq Db(A) 80±2- Peak When Engraving * Lp Cpeak Db(C) <95* In Accordance With Gravograph Standards
Net Weight - 90 Kg
Optional Accessories
- 200 Watt Continuous Power Spindle Motor- Collets Spindle- 150 W Regulated Hfs Spindle- Concentric Tightening Vice- Lubrication System- Chip Collector- Machine Stand- Automatic Braille Dispenser
www.krisbow.com 5www.kawanlama.com
IndustrialPOWERFULL ROTARY MACHINE
CO2 Laser
IS7000/IS8000
LS100 LS100EX LS900
IS7000 XP / IS8000 XP
Specifications : IS7000/IS8000 IS7000 XP/IS8000 XPX & Y Axis Engraving area 610 x 815 mm/610 x 1220 mm Engraving area 610 x 815 mm/610 x 1220 mm
Z Axis Spindle travel 80 mmSpindle clearance with clamping table 80 mmSpindle clearance with vice 140 mm
Spindle travel 80 mmSpindle clearance with clamping table 80 mmSpindle clearance with vice 140 mm
SpindleTool diameter 4,36 mmRotation speed 13-20000 tr/mnServo motor 70 W
Tool diameter 4,36 mmRotation speed 13-20000 tr/mnTool clamping with a collet, servo motor 200 w
Noise level – according toISO 11201 regulation
Empty LA eq dB(A) <72±1When engraving LA eq dB(A) 80±2Peak when engraving Lp cpeak dB(C) <95* In accordance with gravograph standards
Empty LA eq dB(A) <72±1When engraving LA eq dB(A) 80±2Peak when engraving Lp cpeak dB(C) <95* In accordance with gravograph standards
Net weight IS7000 : 220 kgIS8000 : 265 kg
IS7000 XP : 230 kgIS8000 XP : 280 kg
Optional accessories
- 200 Watts continuous power spindle motor- Concentric tightening vice- Cylinder attachment ø 120 mm- Range of spindles (collet, diamond, HF)- Automatic input/output control- Lubrication system
- Standard concentric tightening vice- Industrial vice- 300 W high frequency spindle- Complete range of spindles (standard, collet, diamond, HF)- Automatic input/output control- Table supports- Protection strips for cutting out operations
Specifications : LS100 / LS100EX LS900
Engraving capacitiesEngraving area LS100 : 460 x 305 mm (18 x12”)Engraving area LS100EX : 610 x 305 mm (24 x 12”)Z axis travel : 145 mm (5.71”)
Engraving area : 610 x 610 mm (24 x 24”)Z axis travel : 250 mm (9.84”)
Size and weight
Dimensions LS100 : 760 x 440 x 725 mm (30 x 18 x 29”)Dimensions LS100EX : 1025 x 725 x 450 mmWeight LS100 : 43 kgWeight LS100EX : 70 kg
Dimensions : 1080 x 810 x 945 mm (37 x 32 x 42”)Weight : 180 kg (400 lbs)
Laser
Co² laser source (10,6 µm)Power range LS100 : 30 WPower range LS100EX : 30, 40, 55 WSafety CDRH class 2 (EN60825)
Co² laser source (10,6 µm)Power range 30, 40, 60 and 80 WSafety CDRH class 2 (EN60825)
Energy and power supply
100V-240V AC supplyMax. Speed LS100EX : 2,54 m/sec
100V-240V AC supply (30 and 40 W)200V-240V AC supply (60 and 80 W)
Option and Accessories
- Integrated and various independent exhaust systems- Alternate lenses (1.5, 2.5, 3.5, 4” Focal length)- Honeycomb cutting table- Floating pin table h = 30 mm (1.18”)- Integrated compressor for air assist- Rotary device to engrave round parts, Maximum dia. 130 mm (5.1”)
- Base stand, mecano-welded- Integrated exhaust system, with pre-filter, Z filter, and active carbon filter (replaces the machine base)- Various independent exhaust options- Alternate lenses (1.5, 2.5, 3.5, 4” Focal length)- Honeycomb cutting table- Floating pin table (h = 30 mm)- Integrated compressor for air assist- Rotary device to engrave round parts (max ø200 mm, L = 483 mm,Weight = 10 kg (7.9” Diameter, 16.3” Length, 19.8 lbs)
6 www.kawanlama.com
Multi Applications
Multi Applications
GALVANOMETRIC LASER YAG
FIBRE LASER
Specifications : YAG200Weight anddimensions
- Enclosure dimensions : 590 x 827 x 806 mm
Laser included- Enclosure weight: 75 kg- CCU dimensions: 483 x 184 x 376 mm- CCU weight: 21 kg
Laser
- Diode pumped laser: 1064 nm- Average power: 12 W- Peak power: > 25 KW- Security: CDRH class 1 (EN60825)
Utilityrequirements
- Power supply 115/240 V AC- No external cooling system
Interface
- Laserstyle 5 graphic level- OS : Windows XP, Vista- Options :- Fume and dust extractor- Cylindrical attachment- Integrable version (without enclosure)- Customised enclosure- Numerical Z axis display- Focusing pointer- GravoStyle 5
Marking capacities- Z range up to 280mm- Working table with marking areas in red
Specifications : FIBRE100/FIBRE200
Size and weight
- Casing dimensions : 590x827x806mm- Casing weight : 75kg- CCU dimensions : 483x184x376 mm- CCU weight : 17kg
Fibre100/Fibre200 lasers
- Pulsed Fibre Laser 1,064 nm- Average power : 10 W / 20 W- Peak power : 6 KW / 12 KW- Safety : CDRH class 1 (EN60825)
Energy andpower supply
- 110V-240V AC supply- No external cooling system
Interface
- Laserstyle discovery- OS : Windows® 2000, XP or Vista- Optional accessories:- Exhaust system- Cylindrical attachment- OEM version (without casing)- Customised casing- Numerical Z Axis- Second red pointer for focusing- GravoStyle 5
Marking capabilities- Z stroke : 280mm- Working table
YAG200
LS100EX FIBRE
FIBRE100/FIBRE200
FIBRE200
Specifications : LS100EX Fibre
Engraving Capacities
Engraving Area : 610x305mm Z-Clearance : 145mmMaximum Item Size : 760x330x145mmMaximum Item Weight : 20 kgRaster speed : 1,50 m/s
Laser SourcePulsed fibre : -1,06pmPower : 20WSecurity : CDRH Class II
Interface Software Laserstyle Graphic as standard
Dimensions & Utilities Overall Machinesize : 1025x725x450mmNet weight : 75 kg
Optics * 2.0 in lens as standard* 3.0-4.0 in Optional
Machine Support Floor stand support which can integrate the ES device
Fumes Exhausts * ES10, ES30 (floor stand devices)* LE150HP (intergrated device)
Working Tables* Vacuum table for thin material* Floating pin tables* Honeycomb table
Cylindrical Attachment* Diam. 3-130mm* Max length item 500mm
www.krisbow.com 7www.kawanlama.com
Cutter Grinding MachineACCESSORIES
TABLE SHEARS FOR ENGRAVING MATERIALS
Specifications : CG30
PackagingNet weight 10.5 kgGross weight 12 kgDimensions 415 x 335 x 270 mm
Grinding Angles from 0 to 90ºTruncature without disassembling the collet holder
Grinding wheel
Abrasive : corundumFixing by nut – quick changeProtection housingRotation speed 10.000 rpm
Collets Diameters of the collets available 3.00 to 6.35 mm
CG30
CSM/CSP CSC
Specifications : Csp Plastics Csm Metals
Dimensions 530 x 380 x 240 mm 530 x 380 x 240 mm
Table area 345 x 300 mm 345 x 300 mm
Material recommended Plastics(ABS, PS, PVC)
Metals(aluminum, bross)
Maximum thickness 2.4 mm max. 1 mm max. or 2 mm max.
Maximum width 320 mm 320 mm or 155 mm
Outside stop 200 mm max. 200 mm max.
Inside stop 250 mm max. 250 mm max.
Net weight 11 Kg 11 Kg
Specifications : Csc for Corners
Dimensions 240 x 150 x 120 mm
Maximum thicknessAluminumBrassPlastics (ABS, PVC, PS Type)
0.8 mm0.8 mm3 mm
Blades Machined, ground and coated
Table thickness 9.5 mm
Net weight 1.5 kg
8 www.kawanlama.com
CIRCULAR SAW
Specifications : VA10 VA11 VA21-7 VA21-15
Saw Blade 24/32 toothed blade in tungsten carbide dia. 120x1.7mm
Swaft extraction device with collection bag
Automatic lubrication with tank mounted on a housing
Mobile stop
with spring operated return and graduated Rule to cut up to 200 mm widematerials
Dual stop (on right hand side)with spring Operated return andgraduated rule to supportthe material to be sawn
Dual stop (on right hand side) with spring mounted return and graduated ruleto support the material to be sawn
Side stop - (on left hand side) withadjustment and material support
(on left hand side) with adjustment andmaterial support
Universal motor 110 or 220 Volts – 50/60 Hz 110 or 220 Volts – 50/60 Hz
Max. cutting length 620 mm 665 mm 1030 mm
Max. cutting thickness- Plastics- Light metals- Aluminum profiles
6.3 mm4 mm-
7 mm5 mm15 mm
7 mm4 mm-
7 mm4 mm15 mm
Net weight 18 Kg 28 Kg 30 Kg 31 Kg
Gross weight 22 Kg 36 Kg 38 Kg 39 Kg
VA10
VA21
Material Cutter Machine
www.krisbow.com 9www.kawanlama.com
BEVELLING MACHINE
B4
B6
VA2
Specifications : VA2
Saw bladedia. 120 mmintegrated into a protection guard
Blade rotation 15.000 rpm
Universal motor 110 or220 volts – 50/60 Hz
Net weight 5 Kg
Gross weight 6 Kg
Specifications : B4 B6
Spindle On ball bearings dia. 3,17 mm On ball bearings dia. 6,35 mm
Cutters
2 cutters dia. 3.17 mm(steel or carbide)with 2 types of bevelling 45° and 90°
dia. 6.35 mm with 2 bevelling types 45° and 90°
Vertical travel 9 mm 4 mm
Horizontal travel 5 mm 15 mm
Spindle speed 14.000 rpm 24.000 rpm
Universal motor 110 or 220 volts 110 or 220 volts
Cast iron base 198 x 53 mm -
Net weight 6,5 Kg 8,2 Kg
Gross weight 8 Kg 9,5 Kg
Radius devices - 5-10 and 15 mm
Table - 450 x 90 mm
10 www.kawanlama.com
SMALL ROTARY MACHINEJewelry-Inside and Outside-Ring and Bracelet
Specifications : M20 JEWELMachine size 345 x 315 x 305 mmWeight 11,5 kg
Sound characteristics
Waiting for engraving : < 51 dB (A)Off load : < 60 dB (A)Nominal engraving : < 69 dB (A)Nominal engraving peak : < 89 dB (C)
Flat engravingFlat engraving (X-Y) : 100 x 100 mmSelf centering vice : 105 mm opening capacitySpindle clearance (Z) : 40 mm
Ring engravingcharacteristics
Min-max inside diameter : 12-24 mmMin-max outside diameter : 12,5-27 mmMin-max width : 1-20 mm
M20 JEWEL
M20 PEN
M20 PIX
Specifications : M20 PEN
Size 310 x 340 x 310 mm
Weight 10 Kg
Engraving area 100 x 100 mm
Pen attachmentMaximum diameter : 28 mmLength max : 160 mmLength min : 70 mm
Specifications : M20 PIX
Overall machine size 345 x 315 x 305 mm
Engraving area 100 x 100 mm
Weight 10 kg
Z Stroke 35 mm
Max dimensions of engraving object 115 x 200 x 42 mm
Engravable materialsgold, silver, copper, platinum,aluminum, stainless steel, etc.
www.krisbow.com 11www.kawanlama.com
MANUAL ROTARY MACHINE
RING ENGRAVING MACHINE
Jewelry-Inside and Outside-Ring and Bracelet
Easy to use
B-ENGRAVER
RING CUBE ENGRAVING M10 Jewel
Specifications : B-Engraver
Packaging Dimensions : 530 x 400 x 400 mmNet weight : 5.8 KgGross weight : 6.8 Kg
Pantograph Number of reduction ratios 1Character reduction from 1/5
Chuck with grip Grip type : concentricNumber of jaws : 3Rotation : automatic
Disc for types Material watch making quality brass
Copying stylus Material tempered steel
Engraving tool Material : diamond
Optional accessories • Set of standard jigs• Adjustable jaw for rings with large stones• Chrome brass disc for intensive use• Special stylus with tungsten carbide point for hard chrome discs
Specifications : Ring Cube Engraving
225 x 270 x 385 mm
7,5 kg
5,7” touch-screen
Automatically adjusted engraving height
Text and symbol engraving
Ring : width 1,5 - 8 mm ; Ø 12-25 mmBracelet : width 3-20 mm ; Ø 45-80 mmOptional outside ring/bracelet engraving accessories
< 60 dB
Standards : CE-RoHS
COMPACT ANDBEST VALUE
Specifications : M10 Jewel
Dimensions 230 x 293x 290 mm
Weight 6,5 kg
Maximal Engraving Precision 0,05 mm
Noise LevelEngraving : LAeq = 60 dB (A)
Peak when Engraving = Lp Cpeak = 81,3 dB (C )
Items to be engraved dimension
Rings
Internal Engraving : width = 1,5 – 8 mm, dia. 12 – 25 mm
External Engraving : width = 1,5 – 6 mm, dia. 13,5 – 25 mm
Bracelets
Internal Engraving : width = 3 – 20 mm, dia. 45 – 74 mm
External Engraving : width = 3 – 20 mm, dia. 50 – 80 mm
12 www.kawanlama.com
ACCESSORIES AND APPLICATION
www.kawanlama.comwww.kawanlamaonline.com
kls/p&
a.21
7/2k/tv.12
/nin.uni/11.12
Gravograph is the world’s leading manufacturer of marking solutions, offering of a full range of equipment: C.N.C. (Computer Numerical Controlled) engraving machines, CO2, Fibre and YAG lasers, engraving materials, consumables and services. For over 60 years, Gravograph has remained the industry benchmark thanks to its high quality equipment.
Top Related