Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
1
Ethernet Basics
Ethernet BasicsEthernet <> Industrial
EthernetPROFINET
< The open standard for Realtime Industrial Ethernet >
Ruud Welschen
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
2
Ethernet BasicsHistory
First Drawing by Bob Metcalfe
1980 Digital, Intel and XEROX (DIX) publish the specification of a network technology called Ethernet I IEEE 802.3 publishes the first standard that contains parts of the DIX procedure in 1982 1984: DIX passes Ethernet II, since Ethernet I and IEEE 802.3 were incompatible Today‘s components are based on IEEE 802.3
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
3
Ethernet BasicsEthernet in the ISO / OSI reference model
The Ethernet specification encompasses Layers 1 and 2 of the reference model:
Data Link Layer: Logical Link Control (LLC)
Connection to higher sub-layers Media Access Control MAC)
Grouping of the data (into frames)
Error checking (CRC) CSMA/CD
Physical Layer: Current, voltage Frequency Half/full duplex Physical features (cables, connectors, etc.)
Layer 7
Layer 6
Layer 5
Layer 4
Layer 3
Layer 2
Layer 1
Application
Presentation
Session
Transport
Network
Data Link
Physical
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
4
Ethernet BasicsEthernet in the ISO / OSI reference model
The TCP/IP specification encompasses Layers 3 and 4 of the reference model:
Transport Layer: TCP transport of data
Network Layer: IP Find the way trough the net
Layer 7
Layer 6
Layer 5
Layer 4
Layer 3
Layer 2
Layer 1
Application
Presentation
Session
Transport
Network
Data Link
Physical
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
5
Ethernet BasicsNetwork access procedures CSMA/CD
CS - Carrier Sense
MA - Multiple Access
CD - Collision Detection
Collision
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
10
Ethernet BasicsStructuring of networks with repeaters
Segment A
7
6
5
4
3
2
1
7
6
5
4
3
2
1Repeater
Transmission medium Transmission medium
Segment B
Collision domain
Expansion: 4.5km 1) Number of stations: 1024Access procedure: CSMA/CD
Expansion: 4.5km 1) Number of stations: 1024Access procedure: CSMA/CD
1) In the 10 Mbit/s network
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
12
Ethernet BasicsStructuring of networks with bridges
Collision domain
7
6
5
4
3
2
1
7
6
5
4
3
2
1
Transmission medium Transmission medium
Bridge
Segment A Segment B
Collision domain
Expansion: 4.5km 1) Number of stations: 1024Access procedure: CSMA/CD
Expansion: 4.5km 1) Number of stations: 1024Access procedure: CSMA/CD
1) In the 10 Mbit/s network
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
15
Ethernet Basics3 routes to increased performance on the network
Switching for parallel communication
Full duplex for increasing data throughput
100 Mbit/s for high-speed transport of the data
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
16
Ethernet BasicsWhy 100 Mbit/s ?
High bandwidth guaranteedNon-lag data traffic
even in bursts of data traffic activity (e.g. from workstation/server)
Increased data throughput in the network
Clean network:invalid data packages are minimized
High bandwidth guaranteedNon-lag data traffic
even in bursts of data traffic activity (e.g. from workstation/server)
Increased data throughput in the network
Clean network:invalid data packages are minimized
10 Mbit/s
10 Mbit/s
100 Mbit/s
t
t
t
The 100 Mbit/s network
The 10 Mbit/s network
100 Mbit/s -The Big Pipe!
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
21
Ethernet BasicsBridge/switch
Bridge Multiport-bridge Switch
Differences in the internal architecture have decisive influence on performance
CPU
RAM
CPU
RAM
RAM
CPU
CPU
CPU
CPU
CPU
CPU
CPU
CPU
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
22
Ethernet BasicsParallel networking
Server
Switch
Segment ASegment C
Segment B
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
25
Ethernet BasicsShared LAN/switched LAN
Switched LANEach individual segment has the full
performance/data rateSimultaneous data traffic in several
segments; several message framesFiltering:
Local data traffic remains local;only selected data packets cross segment boundaries
Switched LANEach individual segment has the full
performance/data rateSimultaneous data traffic in several
segments; several message framesFiltering:
Local data traffic remains local;only selected data packets cross segment boundaries
Shared LANAll nodes on the network share network
performance/data rateAll data packets go through all segmentsOnly one message frame on the network at
any one timeCollisions reduce the efficiency of the
network to approximately 40%
Shared LANAll nodes on the network share network
performance/data rateAll data packets go through all segmentsOnly one message frame on the network at
any one timeCollisions reduce the efficiency of the
network to approximately 40%
LAN
Segment A
Segment B
Segment C
Segment D
LAN
Segment A
Segment B
Segment C
Segment D
Data traffic
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
28
Ethernet BasicsFull duplex and parallel networking
100 Mb
it/s 10 M
bit/s
10 Mbit/s
100
Mb
it/s
100 Mbit/s
100 Mbit/s
Parallel networking:Several frames simultaneously
Full duplex:Send and receive datasimultaneously
100 Mbit/s 100 Mbit/s
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
29
Industrial Ethernet Increase in performance
*) Effective data throughput because of collisions
4Mbit/s4Mbit/s
10Mbit/s10Mbit/s
20Mbit/s20Mbit/s
40Mbit/s40Mbit/s
100Mbit/s100Mbit/s
100Mbit/sswitched
full duplex
100Mbit/sswitched
100Mbit/sshared
10Mbit/s switched
full duplex10Mbit/sswitched
10Mbit/sshared
*)
*)
Data throughputData throughput
Net
wo
rk t
ech
no
log
yN
etw
ork
tec
hn
olo
gy
200Mbit/s200Mbit/s
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
31
Ethernet BasicsStructuring of networks with routers
Collision domain
7654321
7654321
Transmission medium Transmission medium
Bridge
Segment A Segment B
Collision domain Collision domain
7654321
7654321
Transmission medium Transmission medium
Bridge
Segment C Segment D
Collision domain
Router
IP subnet IP subnet
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
32
Ethernet BasicsStructuring of networks with routers
Routers Coupling of subnets with identical protocols at the network level (terminal device requires an IP address) Transport decision on Layer 3 (network address), Finding the optimal connection between two subnets Coupling via WAN Requirements: use of "routable" protocols (active Layer 3; ISO protocol is not routable) Hierarchical structures possible through logical subnet formation
Layer 3 switch An extremely fast router thanks to hardware support
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
36
Ethernet BasicsWhat is Industrial Ethernet?
Basic idea Industrial Ethernet components are based on the
familiar IEEE Standards
Supplementation of special features that are especially important for industrial communication
Designed for IndustryComponents have been designed for harsh industrial operation
Industrial Ethernet takes account of the differences in marginal conditions between industrial environments and the office world
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
37
Ethernet BasicsDifferences between office/industrial networksFeature Industry Office
Availability Extremely high requirements Mid-range requirements
Network downtimes < 500 ms Network downtimes in the
required to avoid plant seconds to minutes range
standstills acceptable
Response Guaranteed response times Best-possible r. w/o guarantee
times (already commenced low-priority
transfer is completed before
processing of a higher priority)
Installation By plant commissioning By specialist network personnel
personnel (semi-skilled
personnel)
Network Component part of plant By trained specialists
monitoring monitoring (network administrators)
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
38
Ethernet BasicsDifferences between office/industrial networksFeature Industry Office
Used in Local control cabinet Separate floor distribution boxes
Planning and building measures
for network infrastructure
DIN rail installation 19” assembly
24 V supply 110 / 230 V supply
0-60°C ambient temperature 0-45°C
Some vibration load
Device Low, switches with High, switches with
density fewer ports high number of ports
Topology Linear cabling Star cabling
(optional ring) with higher- Structured
level plant bus and control Floor, building, company site
room
Network Low number High number
modifi- Direct connection between Wide-area infrastructure cabling
cations switches and terminal devices with patch panels and
connection sockets
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
39
Clearly structured network topologies with Ethernet
BDB
FDB FDB FDB
SDB
MDB
DTE DTE DTE DTE
BDB BDB
FDB
SDB
BDB
SDB = Site distriution board FDB = Floor distribution boardBDB = Building distribution board MDB = Machine distribution boardDTE = Data terminal
Office (EN 50173) Industry
Site
Building
Floor,hall
MDB
FDB
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
40
Ethernet in automation Line topology in production hall
Industrial networking
– Line topology at cell and field level
BDB
BDBSDB
Primary cabling
Tertiarycabling
Production hallSecondary cabling
Tertiarycabling
MDBMDB Tertiarycabling
MDB
SDB = Site distribution board, BDB = Building distribution board; MDB = Machine distribution boardDistribution boards are designed as switches or routers in full-duplex mode
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
41
4-poort IE switch, met 2 integrale FastConnect aansluitelementen voor 2 poorten. (Automatische crossing)
Realisatie van low-cost Ethernet lineaire bus topologie met 4-draads FastConnect twisted-pair kabel.
Tot 100 meter per segement.
Aansluiten tot 2 data terminal devices of een data terminal device met een programmeerapparaat d.m.v. RJ45 poorten.
Alle poorten geschikt 10/100 Mbit/s autosensing/autonegotiation.
ELS voeding via externe voeding.
ELS TP 40Electrical lean switch voor Ethernet
Overzicht
Jargon
Configuratie
Mobic
Ethernet I/O
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
42
24V DC
IE FC TP kabel tot 100 m, aan te sluiten d.m.v. Isolatie-doordringingselement
Fiber-opticLAN
Schakelkast
Verbinden van terminal devices of PG met TP kabel tot 10 m.PG koppeling
24V DC
OSM TP40
Lineaire topologie met de ELS TP40
Overzicht
Jargon
Configuratie
Mobic
Ethernet I/O
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
43
Industrial Ethernet Designed for Industry
Design Rugged full-metal housing Module design for DIN-rail mounting, Especially resistant to vibration
Impervious to EMI Guarantees reliable data traffic even in
environments subject to electromagnetic interference
Permanently secure connections Sub-D for Industrial twisted-pair RJ45 full-metal connectors with additional
interlocking BFOC for fiber optic
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
44
Industrial Ethernet Designed for Industry
Diagnostics LEDs (link status, power, collisions, data) Signal contact Simple, low-cost monitoring and function control of
the INCs via a digital signal contact Integration of signals from the network into any
available HMI system (e.g. Win CC) No special monitoring software required No separate network management station required No special training required
SNMP OPC server Web based management SNMP RMON
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
45
Industrial EthernetDesigned for Industry
Wide temperature range 00C to 60°C
Network topologies Linear bus, star, tree Redundant electrical/optical ring
High level of availability High-speed media redundancy in millisecond range
in electrical/optical ring topologies (ESM/OSM) Redundant power supply:
safe low voltage 2 x 24 V DC for ELS, ESM, OSM
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
46
Industrial Ethernet Designed for Industry
Spanning tree algorithm
(IEEE 802.1d)
Spanning tree algorithm
(IEEE 802.1d)
Network reconfiguration
> 30 seconds
Network reconfiguration
> 30 seconds
High-speed redundancy
SIMATIC NET
High-speed redundancy
SIMATIC NET
Network reconfiguration
< 0.3 seconds
Network reconfiguration
< 0.3 seconds
12
3
6
9
12
3
6
9
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
49
user interface on a view
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
50
Industrial Communication
CP343-1Lean Preisgünstiger Ethernet Anschluss für
SIMATIC S7 300 Einfachbreite Baugruppe spart Einbauplatz
im Rack und im Schaltschrank. Für PG-Betrieb sofort Einsatzbereit, da
Vergabe der IP-Adresse direkt aus der Projektierung (DCP Protokoll lt. PROFINET Spezifikation V2).
Baugruppentausch ohne PG durch Configuration-Plug
CP443-1 Advanced Aufbau kleiner lokaler Netzwerke über
integrierten 4-Port Switch Zugriff auf Prozessinformationen mit
Standard-Webbrowser Einfache webbasierte Diagnose auch ohne
STEP 7 Einfache universelle Kopplung über FTP Filesystem als preisgünstiger Massenspeicher Übertragung von ereignisgesteuerten
Meldungen mit E-Mail Baugruppentausch ohne PG durch
Configuration-Plug
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
51
PROFINET
IE/PB Link PN IO Proxy-Funktionalität Investitionsschutz durch Anbindung von
PROFIBUS Slaves an PROFINET IO S7-Routing für PG/OP-Kommunikation Netzübergang als DP-Master Klasse 2 / Vertikale Integration
Softnet PN IO Software für PROFINET IO-Controller
mit OPC-Server und NCM PC
Systemanschlüsse für SIMATIC S7 CP 343-1 und CP 443-1 Advanced mit PROFINET IO
und PROFINET CBA Funktionalität
SCALANCE X 200 Industrielle Switches optimiert für den Einsatz mit PROFINET Einfache Diagnose und Administration durch Integration in die SIMATIC Engineering Tools
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
52
Praktijk
Overzicht
Jargon
Configuratie
Mobic
Ethernet I/O
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
53
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
54
FastConnect RJ45 plug 180/90
Simple connection technique (insulation displacement contacts)for 4-core copper twisted-pair installation cables (100 Mbit/s)
Failsafe connections thanks to good view of connection area
Industrialized design (rugged metal housing, no loose parts)
Good EMI shielding and dispersion (metal housing)
Integral strain relief for installation cables
Additional strain relief of the plug connector possible on the housing
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
55
PREPARE WIRE PREPARE WIRE BY STRIPPING ACCORDINGBY STRIPPING ACCORDINGINSTRUCTION SHEETINSTRUCTION SHEETWITH STRIPPING TOOL WITH STRIPPING TOOL
AND OPEN PLUGAND OPEN PLUG..
11
CLOSE UPPER SHIELDING COVER.CLOSE UPPER SHIELDING COVER.PRESS UPPER AND LOWER PRESS UPPER AND LOWER
SHIELDING COVER SHIELDING COVER TOWARDS EACH OTHERTOWARDS EACH OTHER
44
SHIELDING COVER
LOCK PLUG AND ACTIVATE STRAIN LOCK PLUG AND ACTIVATE STRAIN RELIEF BY TURNING LOCKING DEVICE RELIEF BY TURNING LOCKING DEVICE
180° USING SCREW DRIVER OR SPANNER180° USING SCREW DRIVER OR SPANNER
55
22INSERT WIRE INSERT WIRE TOWARDS TOWARDS STOPPING STOPPING POSITION.POSITION.
STOPPINGPOSITION
22TERMINATE WIRE TERMINATE WIRE BY PRESSING DOWN BY PRESSING DOWN
PIVOT COVERPIVOT COVER..
33
FastConnect RJ45 Plug 180/90
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
56
Industrial Ethernet FastConnect modular outlet
RJ45 outlet for gigabit Ethernet
Category 6 of the international cabling standards ISO/IEC 11801 and EN 50173
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
57
Industrial Ethernet FastConnect Modular Outlet
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
58
Industrial Ethernet FastConnect Modular Outlet
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
59
Industrial Ethernet FastConnect Modular Outlet
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
60
Industrial Ethernet FastConnect Modular Outlet
Systemkonfiguration mit FC Modular Outlet 100 Mbit/s und 1000 Mbit/s
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
61
PROFINET
PROFINET - The Industrial Ethernet standard for automation
Data IOMotion
Safety
Process
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
62
PROFINET – the solution!
PROFINET is the open Industrial Ethernet standard for Automation
PROFINET is based on Industrial Ethernet
PROFINET utilizes TCP/IP and IT-Standards
PROFINET is Real-Time Ethernet
PROFINET allows seamless integration of fieldbus systems
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
63
Distributed Field Devices
PROFINETIT-Standards& Security
Process
Distri-buted
Automation
Distributedfield devices
MotionControl
NetworkInstallation
Safety Real-timecommunication
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
64
Real-Time Communication
<1ms10ms100ms
InternetInternet
Factory Automation Motion Control
PROFINET
TCP/IP
Real-TimeProcess data
Uniform communication und quick reaction times
Simultaneous real-time and IT-service on one cable
Scaleable real-time communication from non-critical time applications up to high performance applications
Unlimited TCP/IP communication
IT-services
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
65
real-time communication with PROFINET
Ethernet
TCP
Real-
tim
e
PROFInet applications
1
IT appli-cationse.g. HTTP SNMP DHCP...
2
Open Channel for TCP/UDP/IP
Device parameterisation and configuration
Reading of diagnostics data
Negotiation of the communication channel for user data
Real Time Channel for SRT
High-performance cyclic data transmission
Event-controlled signals
1
2
Standard data
Real-time data
IP SRT
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
66
Configuration in STEP7
Same configuration view for PROFIBUS and PROFINET
Quick start in PROFINET through the use of existing user know-how
GSDML
GSD + XML = GSDML
STEP7 / HW-Config
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
67
PROFIBUS PROFINET
Configuring/programming Same user views for IOs
Hardware configuring
Diagnostics
Program creation
Hardware Same IO modules alternatively behind
PROFIBUS
PROFINET
PROFIBUS devices are transparent behind the IE/PB link on PROFINET
Same user handling, that is, existing knowledge/experience can be used
Existing investment can be integrated
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
68
Scalance X 108
• 8-port switch with diagnostics via LED
• Establishment of low-cost copper star topologies
• Connection of up to 8 terminal devices via RJ45 sockets
• Rugged IP20 metal housing for direct wall or DIN rail mounting
• Redundant voltage supply
• Integral signal contact
• S7 300 design concept
Scalance X 108
• 8-port switch with diagnostics via LED
• Establishment of low-cost copper star topologies
• Connection of up to 8 terminal devices via RJ45 sockets
• Rugged IP20 metal housing for direct wall or DIN rail mounting
• Redundant voltage supply
• Integral signal contact
• S7 300 design concept
Scalance X 108
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
69
Network management through SNMP (Simple Network Management Protocol)
Agent
Polling
Trap
Event-controlled through agent
Manager
MIB
MIB
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
70
Industrial Wireless LAN
SCALANCE W
Zuverlässig durch Redundanzfunktion und Datenratenreservierung Sicher durch neueste Verschlüsselungsstandards Industriegerecht durch robustes Gehäusedesign (IP 65) Outdoorfähig durch Temperaturbereich von –20°C bis +60°C selbst bei
Betauung
Automation and Drives
EK2002
(C) Siemens AG, 1999-2003, Automation & Drives
SIMATIC NET Networking for Industry
Introduction
Reference model
CSMA/CD
Collision
10Mbit/s Ethernet
Repeater
Bridge
100Mbit/s Ethernet
Switch
Router
Gateway
Gigabit Ethernet
Industrial Ethernet
75
Thanks for your attention.Thanks for your attention.
Ruud WelschenRuud Welschen
Top Related