Download - An Acoustic Demonstration Model for CW and Pulsed Spectroscopy Experiments Torben Starck, Heinrich Mäder Institut für Physikalische Chemie Christian-Albrechts-Universität.

An Acoustic Demonstration Model for

CW and Pulsed Spectroscopy Experiments

Torben Starck, Heinrich Mäder

Institut für Physikalische Chemie

Christian-Albrechts-Universität zu Kiel, Germany

1

Trevor Trueman, Wolfgang Jäger

Department of Chemistry

University of Alberta, Edmonton, Canada

OSU International Symposium on Molecular Spectroscopy, 64th meeting 2009, Paper RH01

2

Overview

• Introduction

Principles of CW and pulsed (FT) spectroscopy experiments

Some remarks on the history of CW- and FT-MW spectroscopy

• An acoustic demonstration model

The sweep absorption experiment (CW spectroscopy)

The emission experiment (FT spectroscopy)

3

CW- vs. FT-techniques

CW: continuous wave excitation

: slowly varying

sample

FT: pulsed excitation

: fixed

sample

() : absorption signal

S(t) : emission signal

t

Fourier transformation (FT)

4

Spectroscopic applications

• CW- and FT-NMR spectroscopySample : molecules containing nuclei with spin > 0

Radiation frequency : RF (several 100 MHz)

Type of interaction : magnetic-dipole interaction

Sample response : macroscopic magnetic dipole moment (FID)

• CW- and FT-MW spectroscopySample : polar molecules in a static gas or a supersonic beam

Radiation frequency : MW (GHz to THz)

Type of interaction : electric-dipole interaction

Sample response : macroscopic electric dipole moment (transient emission)

For NMR and MW spectroscopy, FT-techniques hold considerable advantagesin both resolution and sensitivity over CW-techniques.

5

MW spectroscopy: some remarks on its history

CW-techniques (sweep absorption experiments):

In the first thirty years of microwave spectroscopy, starting after World War II, rotational spectra of polar molecules were recorded only as absorption spectra, employing powerful modulation techniques, such as Stark-modulation (Hughes and Wilson, 1947). Further important developments of absorption spectrometers were particularly achieved in the mm- and sub-mm wavelength range, e.g. the FASSST spectrometer (de Lucia et al., 1997).

Initially, spontaneous emission signals were not considered to be strong enough to be usable for spectroscopic applications. Even in a modern textbook on Molecular Physics (2004), one can find the sentence :The rotational spectra of molecules are observed almost exclusively as absorption spectra, because the emission probability is very small as a result of low transition frequencies.This argument is based on the ν3-dependence of (incoherent) spontaneous emission probability.

6

MW spectroscopy: some remarks on its history

• Early work on pulse techniques in MW spectroscopy Dicke and Romer (1955)

• Stark switching techniques Harrington (1968), Macke et al. (1972), Brittain et al. (1973), Flygare et al. (1974)

• First demonstration of FTMW spectroscopy McGurk, Mäder, Hofmann, Schmalz and Flygare (1974)

• Pulse-induced waveguide (WG)-FTMW- spectroscopy Ekkers and Flygare (1976)

• Molecular beam (MB)-FTMW- spectroscopy Balle and Flygare (1981)

FT-techniques (emission experiments) :The pulse-induced emission experiments are based on coherent spontaneous emission of the molecular sample, originating from a macroscopic polarization.

• Broadband chirped pulse (CP)-FTMW- spectroscopy Pate et al. (2005)

7

FTMW spectroscopy: some remarks on its history

First demonstration of FTMW spectroscopy:

J. Chem. Phys. 61 , 3759 (1974)

Referee's comment :

J,K

3,3

2,1

3,1

4,1

8

FTMW spectroscopy: laboratories all over the world

... and more than 2000 papers published

9

The acoustic demonstration model

Schematic:

CW- and FT-acoustic spectroscopy

Sample : any acoustically resonant object, e.g. a tuning fork Sound waves, generated by a speaker : 20 Hz to 20 kHzType of interaction : excitation of object’s natural frequencies of vibrationSample response : mechanical vibrations of the objectDetector : microphone

In our experimental setup, the speaker and the microphone are both controlled by a computer sound card and the whole setup is housed in a plexiglass box, which serves as resonator.

10

The acoustic demontration model

Experimental setup

11

The sweep absorption (CW) experiment

Screen display at start of experiment

12


Frequency sweep without sample (background spectrum)

13


14

The sweep absorption (CW) expermient

Frequency sweep with beer glass

15


Result for empty beer glass

16

The pulsed emission (FT) experiment

Screen display at start of experiment

17


Realignment of the setup

18


Pulse excitation experiments with different pulse carrier frequencies

19


Screen shots, showing results for different pulse lengths

80 ms

t

200 ms

tpulse spectrum

sample spectrum

20


Screen shots, showing results for different recording times

t3 s

t1 s

Time domain signal

Spectrum

21

The pulsed (FT) experiment: "beer resonances"

22


23


24

The pulsed (FT) experiment: "testing beer content"

25

Danke ! Thanks !

- to the workshops

of the Institut für Physikalische Chemie

at the University of Kiel and

of the Chemistry Departmentat the University of Alberta

- for funds

from the Land Schleswig-Holstein and

from the Natural Sciences and Engineering Research Council

of Canada