Litelab Corp. 251 Elm Street Buffalo, NY 14203 USA • 716-856-4300 • F 716-856-0156 • www.litelab.com © 06.2016
Extrusion:
ALSHousing/Aperture Size:
H01 (wide)For lamp sizes:
C ®
▲ View from below
Voltage/Circuiting Options
6.56”[167]
17.19”[436]
10.2
5”[2
61]
Trimless look for gypsum ceilings
Hat channelor similar
Threadedrod to
buildingstructure
(by others)
1 circ. (120V)1-hot, 1-neutral
1A2 circ. (120V)2-hot, 1-neutral
2A2 circ. (240V)2-hot, 1-neutral
2D1 circ. (277V)1-hot, 1-neutral
3C1 circ. (240V)1-hot, 1-neutral
3D
MBBlack
PWhite
CPCustom Paint
Amperage Options
(240V)
1 16AMP
2 20AMP
3 30AMP
Color Options
To build a slot model number - fill in the boxes below based on your overall slot length.
Specify: H 0 1A L S - - 0 2 1- -VOLTAGE/
CIRCUITINGAMPSLENGTH IN INCHES COLOR
Model Number Guide
Knife edge finishat ceiling plane
Fully adjustable and repositionable BusRun mounted fixtures
Integral and Retro�t LED, Metal Halide and Halogen PAR30, AR111, and R111
Designed to work with adjustable
track style heads (A60PAR30) shown
-COMPONENT
OPTIONS (PAGE 3)
For Litelab Fixtures:Integral LEDPAR30 LEDPAR30 HalogenPAR30 Metal HalideAR111 LEDAR111 HalogenR111 Metal Halide
Refer to litelab.comfor fixture specifications.
Provided with 1 or 2 circuit BusRun.
JOB NAME: FIXTURE TYPE:
Litelab Corp. 251 Elm Street Buffalo, NY 14203 USA • 716-856-4300 • F 716-856-0156 • www.litelab.com © 06.2016
Standard System Components
Housing/Aperture Size:
H01 (wide)Extrusion:
ALSC ®
Adjustable Lite Slot Components
Part Number: Description
ALS-09-H01-021-MB 9” [229] Housing
ALS-24-H01-021-MB 24” [610] Housing
ALS-12-H01-021-MB 12” [305] Housing
ALS-36-H01-021-MB 36” [914] Housing
ALS-48-H01-021-MB 48” [1219] Housing
ALS-72-H01-021-MB 72” [1829] Housing
ALS-AJ-H01-021-MB Adjustable Housing
ALS-BC-12-H01-021-MB Beam Cover
ALS-EC-H01-021-MB Endcap
ALS-EL-H01-021-MB 15” x 15” Corner
ALS-AUX-MB Auxiliary Fixture
ALS-LF-H01-021-MB 15” x 15” ALS Corner Feed Housing
ALS-RF-H01-021-MB 9.5” Refeed Housing
EEF-19W1Axx2-030MB 30” [762] End End Feed
EEF-19W1Axx2-060MB 60” [1524] End End Feed
BUS-19W1Axx2-120MB 120” [3048] Joiner
BUS-19W1Axx2-096MB 96” [2438] Joiner
BUS-19W1Axx2-072MB 72” [1829] Joiner
BUS-19W1Axx2-048MB 48” [1219] Joiner
End/Feed UnitALS-EC-H01-021-MB
9.5”[242]
17.19”[436]
10.25”[261]
6.56”[167]
Standard ModuleALS-XX-H01-021-MB
17.19”[436]
6.56”[167]
Refer to chart
Corner UnitALS-EL-H01-021-MBFeed CornerALS-LF-H01-021-MB
19.56”[496]
19.56”[496]
10.25”[261]
6.56”[167]
15”[381]
15”[381]
Adjustable UnitALS-AJ-H01-021-MB
Unit allows for field adjustments up to 12”
Endcap/Feed
Adjustable Housing
15”x15” Corner
Beam Cover
Standard Housing
Endcap/Feed
BUS-19
Litelab Corp. 251 Elm Street Buffalo, NY 14203 USA • 716-856-4300 • F 716-856-0156 • www.litelab.com © 06.2016
Optional System Components
Housing/Aperture Size:
H01 (wide)Extrusion:
ALSC ®
Beam Cover UnitALS-BC-xx-H01-021-MB
9.5” Refeed HousingALS-RF-H01-021-MB(For use with beam cover)
17.19”[436]
12, 24, 36”
BUS-19 Mounting
Feed Options
EEF-19W
EEC-19W (CL) (includes current limiter)
End End Feed:Standard feed for Bus-19 is 30” long
Max Load30 amp at 12v, 120v,240v, 277v
ALS Mounting Spring Clip
Clip installed within ALS housing at factory. Bus 19 spring loads into clip on-site.
9.5”[242]
6.56”[167]
Available Amperages
Current Limiter (CL) (120v only)
1.0A 120VA1.5A 180VA2.0A 240VA3.0A 360VA4.0A 480VA5.0A 600VA6.0A 720VA8.0A 960VA
12.0A 1440VA
Auxiliary Light Unit for remote power supplyALS-AUX-MB20ALR12/SP18 lamp(BA15d base) not included
Auxiliary or battery powerand switching to be supplied by others. ALS-AUX-MB light unit is attached non-electrically to ALS BusRun.
BCBeam Cover Unit
AUXAuxiliary Light Unit
RFReFeed Housing
Components Options
Top Related