URBAN LIGHTING2010
3
ECLATEC’s offer is the result of the close attention the company pays to social, urban and technical
change.
These trends mean that life, the city and nature are at the heart of the development process
ECLATEC applies to Urban Lighting.
The fi rst part of this catalogue describes the complete lighting solutions, divided up into different
uses:
- «Image» Collection for urban applications.
- «Lumière» Collection for road lighting.
After that you will fi nd the detailed technical descriptions of each luminaire, then a section
dedicated specifi cally to LED lighting.
A multiple-entry alphabetical table of contents will help you fi nd your way around this
catalogue.
Happy reading.
ECLATEC,
life, the city, nature
In a rapidly changing context, the
www.eclatec.com
website is where you will fi nd information on ECLATEC’s latest developments..
Innovation 14% of the company’s workforce (design
offi ce, laboratory, prototyping) are directly
involved in R&D.
Two design offi ces (mechanical and
photometric), a huge database, a
laboratory with dedicated measuring
and test equipment, and a prototyping
department guarantee an active, creative
approach.
The introduction of multiple solutions over
the last few years, integrating the latest
technologies (sources, LEDs, control gear)
has been the tangible result of this policy.
This approach was recognised in 2009
when the company was awarded the INPI
innovation trophy.
Integrated production
ECLATEC, in its immediate scope
(subsidiary or parent company), has the
integrated industrial resources that enable
it to control the design and manufacturing
of its solutions entirely.
And what’s more, these resources
are mainly located in the surrounding
Departements.
ECLATEC, life, the city, nature
Since the company was created in Lorraine in 1927, ECLATEC has been mastering light and its applications in urban settings.Life, the city, nature are the themes at the heart of its approach to design.
To this end exclusively, the company is constantly enriching its human, technical and industrial resources and adapting its solutions.
To provide quality, effi cient products that respect the urban atmosphere and the environment, that is the company’s goal.
5
Eclairage citoyen®
«Eclairage citoyen»® is an ECLATEC concept - socially responsible
lighting is perhaps the best way to express the notion in English
- which prioritises the production of solutions that respect the
environment.
This approach involves the nature of the products offered (a wide range
of wind and solar-powered lighting for example), their design (ULOR
compliance…), the choice of the materials used (RoHS) or the recovery
of end-of-life products (member of the RECYLUM scheme).
«Right lighting», providing the right amount of light in the best
possible way means the right dimensioning of the light sources and
combining them with effi cient control devices such as dual power,
telemanagement, astronomical clock and detection systems.
Eligibility for energy effi ciency certifi cates is a constant for ECLATEC
luminaires.
This approach also applies to the ECLATEC LED programme.
ECLATEC also aims to achieve the same coherence in its production
process, by limiting its environmental footprint; this led to the company
being awarded ISO 14001 certifi cation in 2009.
Style
The resolutely contemporary style of the collections translates the
intentions of designers recognised in the urban planning world - which
is why most of the products in this catalogue bear the signature of the
some of the greatest of them.
The development of the products, their different versions and their
suggested combinations with each other also emanate from the
company’s in-house designers.
The renewal of the ranges combines the best technologies with a
timeless style, to enable them to blend long-term into a variety of
architectural settings.
Presence
ECLATEC, one of the rare French-owned companies in the sector -
and one that manufactures in France - gives particular importance to
its original market.
Some fi fteen agencies spread across the regions study and propose
solutions adapted to each situation.
But ECLATEC luminaires have also always met with great success on
the export markets, sometimes being selected in the most competitive
contexts... Who is aware, for example, that almost 100,000 light points
were supplied by ECLATEC for the lighting of Rome and its suburbs?
Brussels, London, Stockholm, Budapest, Rabat, Kuala Lumpur or
Canberra, so many capitals that are loyal to ECLATEC’s products and
their quality.
ISO 9001:2008
J-M Wilmotte
M. Aurel
L. Davy
Forma 6
Cabinet STOA
J. Nissou
M. Sindall
J. Schnell - Urbanica
EC
LAIRAGE
CITOYE
N®
The ECLATEC range includes 11 standard models:
MULTITEC®, a range of 4 refl ectors (MULTITEC® 53, 73, 83 and
101), covering all the powers in High Pressure Sodium
and Metal Halide.
OPTITEC®, a range of 7 refl ectors for every street lighting situation
and integrating all types of lamps.
The latest additions to the range, on top of the
OPTITEC® 28 and 34, keep up with the changes in
sources and the multiplicity of lighting situations:
- OPTITEC® 17 and OPTITEC® 20, small refl ectors for lamps with G12, E27 or PGZ12
bases, giving excellent photometric properties to
products intended for decorative purposes, such as
luminaires for ambient lighting or lighting columns.
- OPTITEC® 25, reduces the height of the lighting, which translates
into a high width-height ratio.
- OPTITEC® 35, allows the spacing-height ratio to be increased, whilst
meeting the photometric criteria required for road
lighting, in particular in terms of controlling dazzle and
longitudinal uniformity.
- OPTITEC® 27, a development of the OPTITEC® 28 refl ector, gives
excellent performances when combined with metal
halide lamps.
Photometry and optical unitsECLATEC has always stood out thanks to the quality of its photometric solutions.
This reputation is due to the quality of its design offi ce, its technical resources (laboratory, software, databases) and a massive Research & Development effort, applied in particular to the design of optical solutions.
Refl ectors for discharge lamps
ECLATEC has developed a wide range of refl ectors in response to the imperatives of
its markets and developments in light sources.
The performances of these refl ectors are obtained by:
- a rigorous development methodology, concerning in particular the determination of
the optical properties of the materials and the optimisation of the intensity curve
- a geometry based on fl uid, continuous shapes and not on faceted surfaces, which
generate visual defects
- careful selection of materials and surface treatments. The aluminium used to
make the refl ectors is characterised by very high purity. Polishing, anodising and
sealing treatments are used to increase their performances. These solutions provide
properties that are durable over time, whilst at the same time being 100% recyclable.
- a programme of laboratory and on-site testing to check the simulations against
the practical results (lamp fl ux, device effi ciency, intensity of illumination, photometric
brightness, dazzle... ).
- horizontal and vertical adjustment systems, with precise and easily readable
position markers, providing the best compromise between quantitative results
(average intensity of illumination, average photometric brightness, utilisation factor)
and qualitative results (uniformities, dazzle, visual comfort).
an overall design taking into account the arc voltage. An increase in arc voltage
would in fact give higher performances, by artifi cially increasing the lamp fl ux, but it
would penalise the operating life.
Multitec® 73
Eclapak®
Optitec® 34
Optitec® 20
7
Optics for LEDs
The development of LEDs requires a specifi c
approach.
One of the advantages of the LED resides in the
possibility of treating 100% of the luminous fl ux by
refraction.
And the geometry of the lens associated with the LED
must be adapted to guarantee a lighting distribution
suited to street lighting.
The miniaturisation of the source (typically 1 mm²
for the LED chip) imposes tight tolerances on
manufacturing, precision of assembly, surface
condition of the lens and quality of the material used:
ORALENS, a range of lenses developed specially by
ECLATEC, meets all these criteria.
ORALENS allows for excellent photometric
distribution, with spacing at 4 times the height whilst
simultaneously keeping glare to a minimum.
ORALENSThe «Lighting Consultancy» service: Right lighting
Quality urban lighting, energy effi ciency and the safety of the different
users require quality luminaires.
This imperative justifi es ECLATEC’s efforts to develop better optical units
and to produce quality products in general.
But this necessary condition is not suffi cient: an accurate and intelligent
study of the installation is indispensable to optimise the technical,
economic, energy-related and environmental criteria.
With its Lighting Consultancy service, ECLATEC provides customised
responses to multiple lighting situations every day.
A team of lighting engineers works in this fi eld, using dedicated
simulation software, combined with databases of ECLATEC products
in all their confi gurations (refl ectors, bowls, light sources, photometric
adjustments...).
The calculation rules and references applied by the Lighting Consultancy
service follow the requirements of standard EN 13201, which defi nes
the quantitative and qualitative performances specifi c to different lighting
situations.
IMA
GE
RA
NG
E
P
age 1
3
LUM
IER
E R
AN
GE
P
age 6
9
LUM
INA
IRE
S
P
age 1
45
LED
LU
MIN
AIR
ES
Page 1
99
CO
LUM
NS
AN
D B
OLL
AR
D
P
age 2
29
WO
OD
EN
RA
NG
E
P
age 2
45
FLO
OD
LIG
HT
S A
ND
BU
ILT-
IN L
IGH
TIN
G
P
age 2
61
STA
ND
ALO
NE
LIG
HT
ING
Page 2
77
SP
EC
IALI
TIE
S
P
age 2
89
Glossary
A
B/C
D/E
F/G/H
I/K/L
abys 38 156
airport 270
alex 232
aloa 14 202
altaïs 250
alubois 238
amarante 230
applique béton 290
astris 264
atlante 234
auris 62 175
btx 136 192
cadix 236
catelux 296
chorus 98 162 216
climat 134 191
clip evolution 116 178
cytise 106 166
domino 297
duplex 132 190
eclat 128 184
elipt 40 90 158 212
eliptec 294
elyxe 30 150 210
enjoliveurs 298
enza 70 146
forvil 64 195
garig 237
gloria 176
havane 233
helisol 284
idylle 58 172 222
Impact 273
indice 44 94 160 214
kiowa 252
luna 50 170
mamba 224
metro 102 164 218
multibox 300
murena 120 180
nantua 110 168
oblic 56 186
orastar 140 194
orient 60 174
orion 266
paleo 124 182
pantheon 268
pixel 18 74 148
pixel S 22 204
pixel R 22 206
pointes décoratives 299
prioritec 295
quadrilux 138 193
refl ex 52 188 220
refl ex GM 52 189
rochelongue 114 171
script 272
sileo 34 82 152
stralis 262
stratus 48 86 154
stuff 254
sungate 280
sunpole 282
syrio 293
tls 292
totem borne 240
totem mât 248
transfert borne 239
transfert mât 256
tsana 26 78 208
yria 54 187
TECHNICAL ANNEX // p. 305
BRACKET AND SUPPORT GLOSSARY // p. 318
9
IMA
GE
RA
NG
E
P
age 1
3
LUM
IER
E R
AN
GE
P
age 6
9
LUM
INA
IRE
S
P
age 1
45
LED
LU
MIN
AIR
ES
Page 1
99
CO
LUM
NS
AN
D B
OLL
AR
D
P
age 2
29
WO
OD
EN
RA
NG
E
P
age 2
45
FLO
OD
LIG
HT
S A
ND
BU
ILT-
IN L
IGH
TIN
G
P
age 2
61
STA
ND
ALO
NE
LIG
HT
ING
Page 2
77
SP
EC
IALI
TIE
S
P
age 2
89
N/O
P
Q/R
S
T/Y
M
11
Image Range
Image rangeLumiere rangeLuminairesLED luminairesColumns and bollards
Wooden range Floodlights and built-in lightingStandalone lighting SpecialitiesTechnical annex
13
Image Range
The «Image» collection suggests combinations for town centre and residential settings.These solutions constitute a modern compromise taking account of decorative, energy-related and environmental constraints.Several luminaires are offered with conventional sources and in LED versions.Most often, the assemblies in this collection correspond to lighting heights of 3.5 to 6 metres.Finally, some of the luminaires included in this section also feature as back lighting alongside the units in the «Lumière» collection.
Contents
Aloa // p. 14
Pixel // p. 18
Pixel LED // p. 22
Tsana // p. 26
Elyxe // p. 30
Sileo // p. 34
Abys // p. 38
Elipt // p. 40
Indice // p. 44
Stratus // p. 48
Luna // p. 50
Refl ex // p. 52
Yria // p. 54
Oblic // p. 56
Idylle // p. 58
Orient // p. 60
Auris // p. 62
Forvil // p. 64
ALOA
Aloa brings a touch of plant-inspired charm to the city; its transparent lightness draw its inspiration from wide-leaved
tropical plants.
When night falls, this leaf of light spreads its protective veil and no passer-by will fail to be bewitched by the
atmosphere it creates.
In essence, Aloa is a luminaire designed
for urban centres and is obviously part of
the «Image» collection
Its strong personality means it can
be combined with the most sober of
supports
Aloa contains 42 LEDs associated with
ORALENS lenses, providing an effective
photometric distribution at low cost
IMAGE RANGE LED // page 202
ALOAImage Range | Luminaire designed by: J-M WILMOTTE
AL
OA
Image R
ange | L
um
inaire
desig
ned
by : J
-M W
ILM
OTTE
15
ALOAImage Range
Luminaire designed by: J-M WILMOTTE
6 m
5 m
4 m
3 m
m
m
m
Aloa assembly
Design J-M Wilmotte
Confi guration: single bracket assembly
Recommended height: 4 to 5m
Bracket: aluminium
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
ALOA
AL
OA
Image R
ange | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
Aloa assembly
Design J-M Wilmotte
Confi guration: double bracket assembly
Recommended height: 4 to 6m
Bracket: aluminium
Pole top mounted
Pole: cylindroconical steel Ø 60/62mm
Aloa Altaïs assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket, double
bracket
Bracket: aluminium
Pole top mounted
Altaïs pole: consists of a square
galvanised steel base, a conical octagonal
glued-laminated larch wood shaft
Pole heights 4m, 5m and 6m
(cf. page 250)
ALOA ALTAÏS ALOA DOUBLE
17
PIXEL BY ECLATEC
Image Range | Luminaire designed by: STOA consultancy
PIXEL
In lighting, the fi rst material is light itself. It is natural light in the daytime, but at night we have to make
it… this is the only reason we have «lighting equipment» in our towns: to make light!
The Pixel range offers:
- sober, elegant design, absolute discretion; so that in the daytime, the design merges into the urban background;
- a wide choice of high quality lights suited to different urban situations - so that at night the light highlights the city;
- a technology that is economical to manufacture, to maintain and in terms of power consumption; so that it lasts in the city,
day and night.
STOA consultancy
Pixel comes in two sizes and is included
in the «Image» (town centres) and
«Lumière» (road lighting) collections
It can be combined with a wide range
of brackets and arms, as well as square
section or cylindroconical poles
Pixel contains a Multibox® module,
integrating all the control gear
components assembled on integrated
circuits. This removable monobloc
compartment facilitates maintenance
and makes multiple functionalities
possible
Pixel exists in a LED version
LUMIERE RANGE // page 74
IMAGE RANGE LUMINAIRES // page 148 LED // pages 204, 206
PIX
EL
Image R
ange | L
um
inaire
desig
ned
by: S
TO
A c
onsulta
ncy
19
PIXEL BY ECLATEC
Image Range
Luminaire designed by: STOA consultancy
PIXEL REZZO PIXEL CAMARO
Pixel PM Camaro assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Recommended height: 4 to 6m
Camaro bracket: steel
Outreach 200mm, 500mm and 1000mm
Tilt 2°, 5° and 10°
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm,
Ø 76mm
Wall bracket: steel
Outreach 500mm
Pathway bracket: steel
Outreach 500mm
Pixel PM Rezzo assembly
Luminaire designed by STOA
consultancy
Confi guration: single bracket assembly
Recommended height: 4 to 6m
Rezzo bracket: steel
Outreach 640mm
Option 1: PMMA veil
Option 2: PMMA veil and LEDs
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm,
Ø 76mm
6 m
5 m
4 m
3 m
PIX
EL
Image R
ange | L
um
inaire
desig
ned
by: S
TO
A c
onsulta
ncy
PIXEL CURVED POLE PIXEL MAKA PIXEL ORKID PIXEL LINEA
Pixel PM Maka assembly
Design STOA consultancy
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Recommended height: 4 to 6m
Maka bracket: curved steel
Outreach 200 mm (2°, 5° and 10°),
500mm (2°) and 1000mm (5°)
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: square section steel
120 x 120mm or 140 x 140mm (depen-
ding on confi guration)
Wall bracket: steel
Outreach 500mm
Pathway bracket: steel
Outreach 500mm
Pixel PM Orkid assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket, rear bracket
Recommended height: 4 to 6m
Orkid bracket: steel
Outreach 800mm and 1000mm
Tilt 5°
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Pathway bracket: steel
Outreach 500mm
Pixel PM curved pole assembly
Luminaire designed by STOA
consultancy
Confi guration: single bracket assembly
Bracket: steel
Outreach 400mm
Tilt 2°
Pole: curved cylindroconical steel
Pole height 7m
Pixel PM Linea assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket, rear bracket
Recommended height: 4 to 6m
Linea bracket: steel
Outreach 800mm and 1000mm
Tilt 5°
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Pathway bracket: steel
Outreach 500mm
21
PIXEL LEDImage Range | Luminaire designed by: STOA consultancy
PIXEL LED
In lighting, the fi rst material is light itself. It is natural light in the daytime, but at night we have to
make it… this is the only reason we have «lighting equipment» in our towns: to make light!
The Pixel range offers:
- sober, elegant design, absolute discretion; so that in the daytime, the design merges into the urban background;
- a wide choice of high quality lights suited to different urban situations - so that at night the light highlights the city;
- a technology that is economical to manufacture, to maintain and in terms of power consumption; so that it lasts in the city,
day and night.
STOA consultancy
Pixel LED is part of the «Image»
collection (town centres)
Two versions are available:
- version S, with symmetrical lighting
- version R, for road lighting (ORALENS
lenses)
Pixel LED can be combined with multiple
arms, brackets and cylindroconical or
square section poles
IMAGE RANGE LED // pages 204, 206
PIX
EL
LE
D Im
age R
ange | L
um
inaire
desig
ned
by: S
TO
A c
onsulta
ncy
23
PIXEL LEDImage Range | Luminaire designed by: STOA consultancy
PIXEL LED CHROME PIXEL LED CHROME
Pixel LED Chrome assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket, rear bracket
Recommended height: 4 to 6m
Chrome bracket: steel
Outreach 500mm and 1000mm
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Pathway bracket: steel
Outreach 200mm
PIXEL LED CAMARO
Pixel LED Camaro assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Recommended height: 4 to 6m
Camaro bracket: steel
Outreach 200mm, 500mm and 1000mm
Tilt 2°, 5° and 10°
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm,
Ø 76mm
Wall bracket: steel
Outreach 500 mm
Pathway bracket: steel
Outreach 500 mm
6 m
5 m
4 m
3 m
PIXEL LED PICO PIXEL LED PICO PIXEL LED MAKA
PIXEL LED MAKA ALTAÏS
PIX
EL
LE
D Im
age R
ange | L
um
inaire
desig
ned
by: S
TO
A c
onsulta
ncy
Pixel LED Maka assembly
Design STOA consultancy
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Recommended height: from 4 to 6m
Maka bracket: steel
Outreach 200mm (2°, 5° and 10°), 500mm
(2°) and 1000 mm (5°)
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: square section steel
120 x 120mm or 140 x 140mm (depen-
ding on confi guration)
Wall bracket: curved steel
Outreach 500mm
Pathway bracket: steel
Outreach 500mm
Pixel LED Maka wall bracket
Luminaire designed by STOA
consultancy
Confi guration: single bracket assembly
Recommended height: 4 to 5m
Maka wall bracket: steel
Outreach 500mm
Pixel LED Pico assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket, wall bracket
Recommended height: 4 to 6m
Pico bracket: steel
Outreach 800mm and 1000mm
Tilt 5°
Presentation with LED luminous tip
(optional, cf. page 299)
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 500mm
Pathway bracket: steel
Outreach 500mm
Pixel LED Maka Altaïs assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket
Maka bracket: steel
Outreach 500mm
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Mounted on the top of the pole
Altaïs pole: consists of a square
galvanised steel base, a conical octagonal
glued-laminated larch wood shaft
Pole heights 4m, 5m and 6m
(cf. page 250)
PIXEL LED MAKA
25
PIXEL LED
TSANAImage Range
TSANA
Could it be said that the Tsana design squares the circle? With Tsana, the latest technical solutions take on an intangible, immu-
table form to fi t neatly inside the magic ratio of the perfect circle.
Compact, discreet, Tsana’s silhouette, enriched with combinations that enhance its sober geometry, becomes an urban pheno-
menon. And in its simplest expression, Tsana is also suitable for mainly functional applications.
Tsana comes in two sizes, in the
«Image» (town centres) and «Lumière»
(road lighting) collections
It comes with a complete range of arms,
brackets and trims
Tsana also benefi ts from the latest
developments in ECLATEC LED
technology (ORALEDS module, ORALENS
lenses, ORADRIVE driver)
LUMIERE RANGE // page 78
IMAGE RANGE LED // page 208
TS
AN
AIm
age R
ange
27
TSANAImage Range
TSANA CHROME
TSANA HEAD
Tsana Chrome assembly
Confi gurations: single bracket, double
bracket, rear bracket
Recommended height: 4 to 6m
Chrome bracket: steel
Outreach 500mm and 1000mm
Tsana luminaire side-mounted on a cast
aluminium fi tting
Male mounting bracket for pole top fi tting
Shown with Tsana cast aluminium trim
(optional, cf. page 298)
Pole: cylindroconical steel Ø 60/62mm
Pathway bracket: aluminium
Outreach 200mm and 500mm
Tsana Head assembly
Confi gurations: single bracket, double
bracket
Recommended height: 4 to 6m
Head bracket: aluminium
Outreach 300mm
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
6 m
5 m
4 m
3 m
TS
AN
A Im
age R
ange
29
TSANA KARMA
TSANA PARA
TSANA TOP TSANA TRACK
Tsana Para assembly
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Recommended height: 4 to 6m
Para bracket: curved aluminium
Outreach 800mm and 1000mm
Luminaire side-mounted with a swivel joint
Bracket top mounted on the pole
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 800mm
Pathway bracket: aluminium
Outreach 500mm
Tsana Top assembly
Confi gurations: single bracket, double
bracket
Recommended height: 4 to 6m
Top fi tting: cast aluminium
Tilt 10°
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Tsana Track assembly
Confi gurations: single bracket (Track 11),
double bracket (Track 24)
Recommended height: 4 to 6m
Track 11 and Track 24 tips: steel tubes
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Shown with LED luminous tip
(Optional cf. page 299)
Pole: cylindroconical steel Ø 60/62mm
Tsana Karma assembly
Confi gurations: single bracket, double
bracket
Recommended height: 4 to 6m
Chrome Karma: steel
Outreach 500mm and 1000mm
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Shown with “Friday” cast aluminium trim
(optional, cf. page 298)
Pole: cylindroconical steel Ø 60/62mm
ELYXE
Elyxe cultivates a sense of paradox; on the one hand, rigorous, tight, elementary forms drawn together to
construct a volume, evoking a personality with, on the other hand, a resolutely contemporary balance.
Elyxe offers - always in a modern register - a choice of lighting effects, whether you are seeking a marked
atmosphere or functional effi ciency.
Elyxe is presented in the «Image»
collection
Elyxe comes in top mounted or
suspended versions and combines with
an appropriate range of brackets and
wall brackets
Elyxe LED also benefi ts from the
latest developments in ECLATEC LED
technology (ORALEDS module, ORALENS
lenses, ORADRIVE driver)
ELYXEImage Range | Luminaire designed by: L. DAVY
IMAGE RANGE LUMINAIRES // page 150 LED // page 210
ELY
XE
Image R
ange | L
um
inaire
desig
ned
by: L
. DA
VY
31
ELYXEImage Range
Luminaire designed by: L. DAVY
ELYXE TOP MOUN-TED WALL BRACKET ELYXE KIOWA
Elyxe top mounted wall bracket
Design L. Davy
Confi guration: top mounted wall bracket
Recommended height: 3.5 to 5m
Elyxe top mounted wall bracket: cast
aluminium
Outreach 660mm
Integrated connection box
Elyxe Kiowa assembly
Luminaire designed by L. Davy
Confi guration: single light assembly
Kiowa wooden pole: consists of a tubular
galvanised steel base and a cylindroconi-
cal glued-laminated larch wood shaft
Pole height 4m
(cf. page 252)
TT ELYXE KIO
6 m
5 m
4 m
3 m
ELYXE POST TOP MOUNTED
ELYXE BRACKET TOP MOUNTED
ELYXE SUSPENDED WALL BRACKET
ELY
XE
Image R
ange | L
um
inaire
desig
ned
by: L
. DA
VY
Elyxe suspended wall bracket:
Design L. Davy
Confi guration: suspended wall bracket
Recommended height: 3 to 5m
Elyxe suspended wall bracket: cast
aluminium
Outreach 660mm
Integrated connection box
Elyxe top mounted bracket assembly
Design L. Davy
Confi gurations: single bracket, double
bracket
Recommended height: 3.5 to 6m
Elyxe top mounted wall bracket: cast
aluminium
Outreach 660mm
Pole: cylindroconical steel Ø 76mm
ELYXE BRACKET SUSPENDED
Elyxe suspended bracket assembly
Design L. Davy
Confi guration: single light assembly
Recommended height: 3.5 to 5m
Elyxe suspended wall bracket: cast
aluminium
Outreach 660mm
Pole: cylindroconical steel Ø 76mm
Elyxe top mounted assembly
Design L. Davy
Confi guration: single light assembly
Recommended height: 3.5 to 5m
Pole: cylindroconical steel Ø 60/62mm
or special pole Ø 76mm with reducing
connector Ø 60mm x 85mm
33
SILEOImage Range | Luminaire designed by: J-M WILMOTTE
SILEO
Sileo merges bracket and luminaire in a continuous momentum, integrated and coherent, pointing to the
future.
At dusk, the material comes alive when the light distributed by Sileo is fi nely emphasised by the extra strip
of LEDs, which transfi gure the function and add a soothing presence.
Sileo comes in two sizes in the «Image»
and «Lumière» collections
The Sileo unit includes its own bracket
and comes with a cylindroconical pole
From a technical point of view, the
underside of the bracket-luminaire unit,
made of translucent PMMA, is edged
with a decorative strip of LEDs, which
are available in a choice of colours
SILEO
LUMIERE RANGE // page 84
IMAGE RANGE LUMINAIRES // page 152
SIL
EO
Image R
ange | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
35
SILEOImage Range
Luminaire designed by: J-M WILMOTTE
SILEO
Sileo PM assembly
Design J-M Wilmotte
Confi guration: single light assembly
Recommended height: 3.5 and 4.5m
Fitting: decorative fl uted motif in alumi-
nium
Fitting post top mounted
Pole: cylindroconical steel special pole
Ø 90mm with reducing connector
Ø 70 x 100mm
Sileo PM tilted pole assembly
Design J-M Wilmotte
Confi guration: single light assembly
Recommended height: 3.5 and 4.5m
Mounting: surface-mounted on the pole
Decorative fl uted motif in aluminium
Pole: special cylindroconical steel
Ø 90 mm, tilted
Presentation with decorative aluminium tip
(optional, cf. page 299)
SILEO TILTED POLE
6 m
5 m
4 m
3 m
SIL
EO
Image R
ange | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
3737
WALL BRACKET SILEO SILEO DOUBLE
Sileo PM Double assembly
Design J-M Wilmotte
Confi guration: double light assembly
Recommended height: 3.5 and 4.5m
Fitting: decorative fl uted motif in alumi-
nium
Fitting post top mounted
Pole: cylindroconical steel special pole
Ø 90mm with reducing connector
Ø 70 x 100mm
Sileo PM wall bracket
Design J-M Wilmotte
Confi guration: wall bracket
Recommended height: 3.5 to 4.5m
Decorative fl uted motif in aluminium
SILEO DOU
ABYSImage Range | Luminaire designed by: J. SCHNELL - Urbanica
4 m
3 m
2 m
Abys assembly
Design J. SCHNELL - Urbanica
Confi guration: single light
Recommended height: 4 to 5m
Pole: cylindroconical steel special
pole Ø 90mm
LUMINAIRES // page 156
AB
YS
Image R
ange | L
um
inaire
desig
ned
by: J
. SC
HN
ELL - U
rbanic
a
39
ELIPT Image Range | Luminaire designed by: J-M WILMOTTE
ELIPT
Elipt is a well-born luminaire, a cross between just the right lines and a millimetric measuring of its volumes.
Combined with a rich range of brackets, Elipt maintains a timeless effect of balance in all circumstances.
Its subtly modern look blends easily with all environments, providing a dose of energy and dynamism.
Elipt comes in three sizes, which can
be found in the «Image» and «Lumière»
collections
The palette of combinations is
completed by a multitude of brackets
and arms underscoring the undeniable
appeal of this luminaire
Elipt LED also benefi ts from the latest
developments in ECLATEC LED
technology (ORALEDS module, ORALENS
lenses, ORADRIVE driver)
The 45 and 55 versions of the Elipt were entirely redesigned in 2008 (V3), whilst retaining the basic aesthetics: the main
aluminium components are now cast by injection, which has improved the quality of execution, ingress protection and overall
functionality
LUMIERE RANGE // page 90
IMAGE RANGE LUMINAIRES // page 158 LED // page 212
EL
IPT
Image R
ange | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
41
ELIPTImage Range
Luminaire designed by: J-M WILMOTTE
Elipt Top assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket, double
bracket
Recommended height: 4 to 6m
Top bracket: cast aluminium
Tilt 10°
Post Top Mounted
Pole: cylindroconical steel Ø 60/62mm
Elipt Track assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket (Track 11),
double bracket (Track 24)
Recommended height: 4 to 6m
Track 11 and Track 24 tips: tubular steel
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
ELIPT TOP ELIPT TRACK
6 m
5 m
4 m
3 m
EL
IPT
Image R
ange | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
Elipt Chrome assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket, double
bracket, rear bracket, wall bracket
Recommended height: 4 to 6m
Chrome bracket: steel
Outreach 500mm and 1000mm
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Pathway bracket: aluminium
Outreach 500mm
Optional: pathway bracket with fastening
plate
Wall bracket: aluminium
Outreach 500mm
Elipt Totem assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket, double
bracket
Pole height: 4.7m
Fastening plate: cast aluminium
Luminaire side-mounted with a swivel joint
Totem pole: consists of a tubular galvani-
sed steel base and a cylindrical glued-la-
minated larch shaft Ø 140mm
(cf. page 248)
Elipt Head assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket, double
bracket
Recommended height: 4 to 6m
Head bracket: aluminium
Luminaire side-mounted with a swivel joint
Bracket top mounted on the pole
Outreach 300mm
Pole: cylindroconical steel Ø 60/62mm
Elipt Para assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Recommended height: 4 to 6m
Para bracket: curved aluminium
Outreach 800mm and 1000mm
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 800mm
Pathway bracket: aluminium
Outreach 500mm
ELIPT CHROME ELIPT HEAD ELIPT TOTEM ELIPT PARA
43
INDICEImage Range
INDICE
This is a luminaire that plays it cards close to its chest, and this was the intention that inspired the creation
of Indice, launched in 2005.
Behind its apparent soberness, when you look closer this luminaire reveals a more playful temperament,
offering a cheerful range of domes, bowls, brackets and fastenings.
Faced with different uses, different contexts, different intentions, the lighting designer has an «interactive»
choice, enabling him to play with the amusing simplicity of the Indice components to compose his solu-
tions.
Indice comes in two sizes and is
included in the «Image» and «Lumière»
offers
There is a wide choice of versions,
brackets and arms
Indice LED also benefi ts from the
latest developments in ECLATEC LED
technology (ORALEDS module, ORALENS
lenses, ORADRIVE driver)
LUMIERE RANGE // page 94
IMAGE RANGE LUMINAIRES // page 160 LED // page 214
IND
ICE
Image R
ange
45
GraGraphiphic Vc Verse iononooos Spiral VeVersirsion on iiiS eeeersirr onVeVeVVVVVVolVoluteuteuteuteuteu VV VVeee Parabol Verser ionara
InIndidicec RRaaanngegea
INDICEImage Range
Indice «Latéral Top» assembly
Assembly possible with Indice versions:
Spiral, Graphic, Volute, Parabol
Confi gurations: single bracket, double
bracket, wall bracket
Recommended height: 4 to 6m
«Lateral Top» bracket: aluminium
Luminaire side-mounted onto the bracket
Male mounting bracket for pole top Þ tting
Pole: cylindroconical steel ¯ 60/62mm
Wall bracket: aluminium
Indice Cilia assembly
Assembly possible with Indice versions:
Spiral, Graphic, Volute, Parabol
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Recommended height: 4 to 6m
Cilia bracket: aluminium
Outreach 800mm and 1000mm
Luminaire suspended by ¯ ¾Ó Thread
Bracket post top mounted.
Pole: cylindroconical steel ¯ 60/62mm
Wall bracket: aluminium
Outreach 800mm
Pathway bracket: aluminium
Outreach 500mm
6 m
5 m
4 m
3 m
INDICE «LATERAL TOP» INDICE CILIA
IND
ICE
Image R
ange
Indice Top assembly
Assembly possible with Indice versions:
Spiral, Graphic, Volute, Parabol
Confi gurations: single bracket, double
bracket
Recommended height: 4 to 6m
Arm: aluminium
Side mounting with integrated arm
Male mounting bracket for pole top Þ tting
Pole: cylindroconical steel ¯ 60/62mm
Indice curved pole assembly
Assembly possible with the Indice Graphic
luminaire
Confi guration: single light assembly
Recommended height: 5 to 6m
Bracket: steel
Outreach 400mm
Pole: cylindroconical curved steel
Pole height 6 to 7m
Indice Para assembly
Assembly possible with the Indice Graphic
luminaire
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Recommended height: 4 to 6m
Para bracket: aluminium
Outreach 800mm and 1000mm
Close coupled mounting of the luminaire
Pole top mounting
Pole: cylindroconical steel ¯ 60/62mm
Wall bracket: aluminium
Outreach 800mm
Pathway bracket: aluminium
Outreach 500mm
Indice U-bracket assembly
Assembly possible with Indice versions:
Spiral, Graphic, Volute, Parabol
Confi guration: single light assembly
Recommended height: 4 to 6m
U-bracket: aluminium
Top mounting of the bracket on the pole
Pole: cylindroconical steel ¯ 60/62mm
INDICE CURVED POLE INDICE PARA
INDICE U-BRACKET INDICE TOP
47
Stratus assembly
Confi gurations: single bracket, double bracket,
wall bracket, rear bracket
Recommended height: 4 to 6m
Noa bracket: aluminium
Outreach 700mm
Luminaire suspended with a swivel joint
Bracket post top mounted
Salomé bracket: aluminium
Outreach 700mm
Bracket height: 2m
Luminaire suspended with a swivel joint
Male mounting bracket for pole top Þ tting
Saxo bracket: aluminium
Outreach 650mm and 1200mm
Tilt 15¡
Luminaire suspended with a swivel joint
Fixed to pole by a collar clamp
Poles: special steel pole and Totem type cylindrical
wooden pole (cf. page 248)
STRATUSImage Range
6 m
5 m
4 m
3 m
2 m
e bracket, double bracket,
ket
: 4 to 6m
ge
Noa Salomé Saxo - Totem pole
LUMIERE RANGE// page 86
LUMINAIRES // page 154
ST
RA
TU
S Im
age R
ange
49
LUNAImage Range | Luminaire designed by: J-M WILMOTTE
6 m
5 m
4 m
3 m
2 m
Luna assembly
Design J-M Wilmotte
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Total heights: 4.5 / 4.7m
Mounting: cast aluminium clamping collar
Poles:
- Pole : cylindroconical steel ¯ 60/62mm
height 4.5m
- Totem wooden pole consists of a tubular
galvanised steel base and a cylindroconical
glued-laminated larch wood shaft:
¯ 140mm for 4.7m pole (cf. page 248)
Wall bracket: aluminium
Pathway bracket: aluminium
Totem Pole
LUMINAIRES // page 170
LU
NA
Image R
ange | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
51
REFLEXImage Range | Luminaire designed by: J-M WILMOTTE
6 m
5 m
4 m
3 m
2 m
Refl ex PM assembly
Design J-M Wilmotte
Confi guration: single light assembly
Poles:
- Special steel pole ¯ 90mm, with spigot ¯ 70 x 100mm
Luminaire post top mounted
Pole height: 3.5m
- Kiowa wooden pole: consists of a tubular galvanised steel
base and a cylindroconical glued-laminated larch wood
shaft
Pole height: 4m (cf. page 252)
Refl ex GM assembly
Design J-M Wilmotte
Confi guration: single light assembly
Total height: 6m
Poles:
- Special cylindroconical steel pole ¯ 110mm, with spigot
¯ 90 x 165mm
Luminaire mounted on top of the pole
Pole height 4.5m
Refl ex PM - Kiowa PoleRefl ex PMRefl ex GM
LUMINAIRES // pages 188, 189
LED // page 220
RE
FL
EX
Image R
ange | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
53
YRIAImage Range
6 m
5 m
4 m
3 m
2 m
Yria assembly
Confi gurations: single light assembly, wall
bracket
Poles:
- Pole : cylindroconical steel ¯ 60/62mm
Height: 3.5m, 4m
Luminaire post top mounted
- Kiowa wooden pole: consists of a tubular
galvanised steel base and a cylindroconical
glued-laminated larch wood shaft
Pole height: 4m (cf. page 252)
Wall bracket: aluminium
Outreach 600mm
Kiowa Pole
LUMINAIRES // page 187
YR
IA Im
age R
ange
55
OBLICImage Range | Luminaire designed by: J-M WILMOTTERange | Luminaire designed by: J-M WILMOTTE
6 m
5 m
4 m
3 m
2 m
Oblic assembly
Design J-M Wilmotte
Confi gurations: single light assembly, wall
bracket
Poles:
- Special cylindroconical steel pole
¯ 90mm with spigot ¯ 70 x 100mm
Luminaire post top mounted
Pole height: 3.5m
- Kiowa wooden pole: consists of a tubular
galvanised steel base and a
cylindroconical glued-laminated larch
wood shaft
Pole height: 4m
(cf. page 252)
Wall bracket: aluminium
Outreach 700mm
Kiowa Pole Wall Bracket
LUMINAIRES // page 186
OB
LIC
Image R
ange | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
57
IDYLLEImage Range
Idylle assembly
Confi gurations: single bracket, double
bracket
Top Clip bracket: aluminium
Outreach 600mm
Poles:
- Pole : cylindroconical steel ¯ 60/62mm
Heights: 3.5m and 4m
- Stepped tubular steel pole
Aluminium trims
Heights: 3.5m and 4m
6 m
5 m
4 m
3 m
2 m
Top Clip double bracketStepped Pole
LUMINAIRES // page 172
LED // page 222
IDY
LL
E Im
age R
ange
59
ORIENTImage Range
6 m
5 m
4 m
3 m
2 m
Orient assembly
Confi gurations: single bracket, double brac-
ket, wall bracket
Recommended height: 3.5m
Orient top mounted bracket: aluminium
Outreach 650mm
Luminaire post top mounted on the bracket
Bracket post top mounted on the pole
Orient suspended bracket: aluminium
Outreach 700mm
Suspended luminaire
Bracket post top mounted on the pole
Pole: cylindroconical steel ¯ 60/62mm
Orient post top mounted wall bracket:
aluminium
Outreach 650mm
4
3
2
LUMINAIRES // page 174
Orient Top Mounted Orient Orient Suspended Wall Bracket
OR
IEN
T Im
age R
ange
61
AURISImage Rangenge
6 m
5 m
4 m
3 m
2 m
Auris assembly
Confi gurations: single bracket, double
bracket
Recommended height: 3.5m, 4m
Top Clip bracket: aluminium
Outreach 600mm
Luminaire post top mounted on the bracket
Bracket post top mounted on the pole
Orient top mounted wall bracket:
aluminium
Outreach 650mm
Pole: steel Ø 60 or 76mm
Top Clip double bracket Wall BracketTop Clip
LUMINAIRES // page 175
AU
RIS
Image R
ange
63
FORVILImage Range
6 m
5 m
4 m
3 m
2 m
Forvil assembly
Confi gurations: single bracket, double brac-
ket, wall bracket, pathway bracket
Recommended height: 4 to 6m
Forville bracket: aluminium
Outreach 590mm
Luminaire suspended by Ø ¾” Thread
Male mounting bracket for pole top fi tting
Track 11 and Track 24 tips: tubular steel
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Forville wall bracket: aluminium
Outreach 590mm
Forville Wall BracketTrack 11
LUMINAIRES // page 195
FO
RV
IL Im
age R
ange
65
67
Lumière Range
Image RangeLumière RangeLuminairesLED LuminairesColumns and bollards
Wooden range Floodlights and built-in lightingStandalone lighting SpecialitiesTechnical annex
69
Lumière Range
The «Lumière» collection includes assemblies more specifi cally for lighting roads.These combinations have a decorative dimension when used in urban settings, or translate a more functional vocation when the context justifi es it.Photometric performance, reliability and economy are the main factors considered in designing this collection.Several LED lighting solutions are available.The heights of the lights vary from 6 and 12 metres.
Contents
Enza // p. 70
Pixel // p. 74
Tsana // p. 78
Sileo // p. 82
Stratus // p. 86
Elipt // p. 90
Indice // p. 94
Chorus // p. 98
Metro // p. 102
Cytise // p. 106
Nantua // p. 110
Rochelongue // p. 114
Clip Evolution // p. 116
Murena // p. 120
Paleo // p. 124
Eclat // p. 128
Duplex // p. 132
Climat // p. 134
BTX // p. 136
Quadrilux // p. 138
Orastar // p. 140
ENZALumière Range | Luminaire designed by: M. AUREL
ENZA
«Today the city, with its sophisticated public spaces, looks more and more like an
extension of our domestic space; quality of the materials, the surface treatments, the lighting…
The design of a new luminaire can do nothing else but follow this qualitative logic. imagine a smooth,
compact object with clearly defi ned lines.
Continuity in the form, discontinuity in the materials for a luminaire with an Image close to our domestic
universe. Sophisticated materials and surface treatments ensure the lantern is a strong presence both
day and night. Cohesion in the technical and formal design create an object that meets the quality and
performance requirements of today’s cities.»
Marc Aurel
Enza comes in two sizes and is included
in the «Lumière» collection
The Enza range is enriched by several
mechanically welded steel and cast
aluminium brackets
Beyond its special shape, Enza is also a technological treasure trove, as it contains a Multibox® compartment with all the control
gear components assembled on integrated circuits.
This removable monobloc compartment facilitates maintenance and makes multiple functionalities possible.
The Easylink® process allows easy fi tting on any support.
These innovations won ECLATEC the INPI trophy for innovation in 2009.
LUMIERE RANGE LUMINAIRES // page 146
EN
ZA
Lum
ière
Range | L
um
inaire
desig
ned
by: M
. AU
RE
L
71
ENZALumière Range
Luminaire designed by: M. AUREL
9 m
10 m
8 m
7 m
6 m
5 m
ENZA DONNA ENZA KCA
Enza Donna assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Donna bracket: cast aluminium
Outreach 600mm, 800mm and 1000mm
Tilt 5°
Luminaire side-mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 600mm, 800mm and 1000mm
Pathway bracket: aluminium
Outreach 600mm
Enza KCA assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
KCA bracket: aluminium
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire side-mounted onto the bracket
Bracket post top mounted
Shown with “CITY” trim (optional, cf. page
298)
Pole: cylindroconical steel Ø 60/62mm
EN
ZA
Lum
ière
Range | L
um
inaire
desig
ned
by: M
. AU
RE
L
ENZA PRIMA ENZA SAÏAN ENZA CYTISE ENZA ORKID
Enza Saïan assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket, wall bracket
Saïan bracket: aluminium
Outreach 800mm, 1000mm and 1200mm
Tilt 5°
Luminaire side-mounted onto the bracket
Bracket post top mounted
Pole: steel Ø 110mm,
spigot Ø 90/110mm
Pole heights: 6.5m, 7.5m, 8.5m and 9.5m
Wall bracket: aluminium
Outreach 1000mm
Enza Cytise assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Cytise bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire side-mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm
Enza Orkid assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket, pathway bracket
Recommended height: 6 to 9m
Orkid bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 5°
Luminaire side-mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Enza Prima assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Prima bracket: steel
Outreach 800mm, 1000mm and 1200mm
Luminaire side-mounted onto the bracket
Male mounting bracket for pole top fi tting
Shown with decorative aluminium tip
(optional, cf. page 299)
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm
73
PIXEL BY ECLATEC
Lumière Range | Luminaire designed by: STOA CONSULTANCY
PIXEL
In lighting, the fi rst material is light itself. It is natural light in the daytime, but at night we have to make
it… this is the only reason we have «lighting equipment» in our towns: to make light!
The Pixel range offers:
- sober, elegant design, absolute discretion; so that in the daytime, the design merges into the urban background;
- a wide choice of high quality lights suited to different urban situations - so that at night the light highlights the city;
- a technology that is economical to manufacture, to maintain and in terms of power consumption; so that it lasts in the city,
day and night.
STOA consultancy
Pixel comes in two sizes and is included
in the «Image» (town centres) and
«Lumière» (road lighting) collections
It can be combined with a wide range
of brackets and arms, as well as square
section or cylindroconical poles
Pixel exists in a LED version
Pixel contains a Multibox® module, integrating all the control gear components assembled on integrated circuits. This
removable monobloc compartment facilitates maintenance and makes multiple functionalities possible
LUMIERE RANGE
IMAGE RANGE // page 18 LUMINAIRES // page 148 LED // pages 204, 206
PIX
EL
Lum
ière
Range | L
um
inaire
desig
ned
by: S
TO
A C
ON
SU
LTA
NC
Y
75
PIXEL BY ECLATEC
Lumière Range
Luminaire designed by: STOA CONSULTANCY
PIXEL CAMARO PIXEL MAKA
Pixel GM Maka assembly
Design STOA consultancy
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Maka bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 2°, 3° and 4°
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: square section steel 120 x 120mm
or 140 x 140mm (depending on confi gu-
ration)
Wall bracket: steel
Outreach 500mm
Pathway bracket: steel
Outreach 500mm
Pixel GM Camaro assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Camaro bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 2°, 5° and 10°
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm,
Ø 76mm and Ø 89mm
Wall bracket: steel
Outreach 500mm
Pathway bracket: steel
Outreach 500mm
9 m
10 m
8 m
7 m
6 m
5 m
PIXEL MUSA PIXEL ORKID PIXEL CHROME PIXEL SAMOA
PIX
EL
Lum
ière
Range | L
um
inaire
desig
ned
by: S
TO
A C
ON
SU
LTA
NC
Y
Pixel GM Samoa assembly
Luminaire designed by STOA
consultancy
Confi guration: single light assembly
Recommended height: 6 to 9m
Samoa bracket: steel
Outreach 1000mm
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Pixel GM Chrome assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket, rear bracket
Recommended height: 6 to 9m
Chrome bracket: steel
Outreach 500mm and 1000mm
Tilt 5°
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Pathway bracket: steel
Outreach 200mm
Pixel GM Musa assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Musa bracket: steel
Outreach 800mm, 1000mm and 1200mm
Pole: cylindroconical steel Ø 60/62mm
Pixel GM Orkid assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Orkid bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 5°
Luminaire fi xed onto the bracket by a cast
aluminium adapter piece
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
77
TSANALumière Range
TSANA
Could it be said that the Tsana design squares the circle?
With Tsana, the latest technical solutions take on an intangible, immutable form to fi t neatly inside the
magic ratio of the perfect circle.
Compact, discreet, Tsana’s silhouette, enriched with combinations that enhance its sober geometry,
becomes an urban phenomenon. And in its simplest expression, it is also suitable for mainly functional
applications.
Tsana comes in two sizes and is
included in the «Image» (town centres)
and «Lumière» (road lighting) collections
It comes with a complete range of arms,
brackets and trims
Tsana also benefi ts from the latest
developments in ECLATEC LED
technology (ORALEDS module, ORALENS
lenses, ORADRIVE driver)
LUMIERE RANGE
IMAGE RANGE // page 26 LED // page 208
79
TS
AN
ALum
ière
Range
TSANALumière Range
TSANA MUSA TSANA NOA
Tsana Musa assembly
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 8m
Musa bracket: steel
Outreach 800mm, 1000mm and 1200mm
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Shown with “Friday” cast aluminium trim
(optional, cf. page 298)
Pole: cylindroconical steel Ø 60/62mm
Tsana Noa assembly
Confi gurations: single bracket, asymme-
trical double bracket, pathway bracket
Noa bracket: aluminium
Outreach 700mm and 1200mm
Luminaire side-mounted onto the bracket
Bracket post top mounted
Shown with “Tsana” cast aluminium trim
(optional, cf. page 298)
Pole: cylindroconical steel Ø 110mm,
spigot Ø 90 x 110mm
Heights: 6.5m, 7.5m and 8.5m
Pathway bracket: aluminium
Outreach 700mm
9 m
10 m
8 m
7 m
6 m
5 m
TS
AN
ALum
ière
Range
TSANA ORKID TSANA PRIMA TSANA TONGA TSANA VOLTA
Tsana Prima assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 8m
Prima bracket: steel
Outreach 800mm, 1000mm and 1200mm
Luminaire side-mounted onto the bracket
Male mounting bracket for pole top fi tting
Shown with “Tsana” cast aluminium trim
(optional, cf. page 298)
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm
Tsana Tonga assembly
Confi gurations: single bracket
double bracket, wall bracket
Recommended height: 6 to 8m
Tonga bracket: steel
Outreach 1000mm
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 500mm
Optional: pathway bracket with fastening
plate
Tsana Volta assembly
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 8m
Volta bracket: steel
Outreach 1000mm and 1200mm
Luminaire side-mounted onto the bracket
Male mounting bracket for pole top fi tting
Shown with “Tsana” cast aluminium trim
(optional, cf. page 298)
Pole: cylindroconical steel Ø 60/62mm
Tsana Orkid assembly
Confi gurations: single bracket, double
bracket, pathway bracket
Recommended height: 6 to 8m
Orkid bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 5°
Luminaire side-mounted onto the bracket
Male mounting bracket for pole top fi tting
Shown with “Tsana” cast aluminium trim
(optional, cf. page 298)
Pole: cylindroconical steel Ø 60/62mm
Pathway bracket: steel
Outreach 500mm
81
SILEOLumière Range | Luminaire designed by: J-M WILMOTTE
SILEO
Sileo merges bracket and luminaire in a continuous momentum, integrated and coherent, pointing to the
future.
At dusk, the material comes alive when the light distilled by Sileo is fi nely emphasised by the extra strip of
LEDs, which transfi gure the function and add a soothing presence.
Sileo comes in two sizes in the «Image»
and «Lumière» collections
The Sileo unit includes its own
bracket and is generally mounted on a
cylindroconical pole
From a technical point of view, the
underside of the bracket-luminaire unit,
made of translucent PMMA, is edged
with a decorative strip of LEDs, which
are available in a choice of colours
LUMIERE RANGE
IMAGE RANGE // page 34 LUMINAIRES // page 152
SIL
EO
Lum
ière
Range | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
83
SILEOLumière Range
Luminaire designed by: J-M WILMOTTE
SILEO SILEO DOUBLE
SIL
EO
Lum
ière
Range | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
Sileo GM assembly
Design J-M Wilmotte
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Recommended height: 6.5 to 9.5m
Sileo bracket: aluminium
Outreach 1700mm, 2050mm and
2400mm
Luminaire side-mounted onto the bracket
Bracket post top mounted
Pole: special cylindroconical steel
Ø 110mm with spigot Ø 90 x 110mm
Sileo PM wall bracket:
aluminium
Sileo PM pathway bracket:
aluminium
9 m
10 m
8 m
7 m
6 m
5 m
85
SILEO DOU
STRATUSLumière Range
STRATUS
Stratus dispenses a luminous fl ux outlined by a discrete halo, like a fairy light illuminating city life.
Its overall balance, combined with a contemporary design, makes Stratus an original and always appre-
ciated product; its different brackets contribute to a large extent to the success of a solution that is often
found in modern urban settings.
Stratus comes in only one size and is
included in the «Image» and «Lumière»
collections
Stratus combines with a wide array of
steel and aluminium brackets
The photometric design of the luminaire has been completely overhauled, and it now has an asymmetrical Optitec® 20 refl ector
(«Lumière» collection) which is compatible with all the most recent sources; at the same time, the ULOR performance of this
new version of the Stratus has been considerably improved by these changes
LUMIERE RANGE
IMAGE RANGE // page 48 LUMINAIRES // page 154
ATUS
tus dispenses a luminous flux outlined by a discrete halo like a fairy
ST
RA
TU
SLum
ière
Range
87
STRATUSLumière Range
STRATUS CYTISE
Stratus Cytise assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Cytise bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire suspended with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm
9 m
10 m
8 m
7 m
6 m
5 m
ST
RA
TU
SLum
ière
Range
8989
STRATUS KARMA
STRATUS SAXO
STRATUS SAXO
STRATUS RETRO
Stratus Rétro assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Retro bracket: steel
Outreach 750mm and 1100mm
Luminaire suspended with a swivel joint
Male mounting bracket for pole top fi tting
Shown with LED luminous tip
(optional, cf.page 299)
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 750mm
Pathway bracket: steel
Outreach 500mm, 750mm and 1100mm
Stratus Saxo assembly
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Recommended height: 6 to 9m
Saxo bracket: aluminium
Outreach 650mm and 1200mm
Tilt 15°
Luminaire suspended with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 650mm and 1200mm
Pathway bracket: aluminium
Outreach 650mm
Stratus Saxo assembly
Confi guration: wall bracket
Recommended height: 6 to 9m
Saxo bracket: aluminium
Outreach 650mm and 1200mm
Tilt 15°
Luminaire suspended with a swivel joint
Stratus Karma assembly
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Karma bracket: steel
Outreach 800mm, 1000mm and 1200mm
Luminaire suspended with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
ELIPTLumière Range | Luminaire designed by: J-M WILMOTTE
ELIPT
Elipt is a well-born luminaire, a cross between just the right lines and a millimetric measuring of its volumes.
Combined with a rich range of brackets, Elipt maintains a timeless effect of balance in all circumstances.
Its subtly modern look blends easily with all environments, providing a dose of energy and dynamism.
Elipt comes in three sizes, which can
be found in the «Image» and «Lumière»
collections
The palette of combinations is
completed by a multitude of brackets
and arms underscoring the undeniable
appeal of this luminaire
Elipt also benefi ts from the latest
developments in ECLATEC LED
technology (ORALEDS module, ORALENS
lenses, ORADRIVE driver)
The 45 and 55 versions of the Elipt were entirely redesigned in 2008 (V3), whilst retaining the basic aesthetics: the main
aluminium components are now cast by injection, which has improved the quality of execution, ingress protection and overall
functionality
LUMIERE RANGE
IMAGE RANGE // page 40 LUMINAIRES // page 158 LED // page 212
EL
IPT
Lum
ière
Range | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
91
ELIPTLumière Range
Luminaire designed by: J-M WILMOTTE
ELIPT TONGA ELIPT ACCORD
Elipt Accord assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Accord bracket: aluminium
Outreach 600mm, 1315mm
Luminaire side-mounted with a swivel joint
Bracket post top mounted
Pole: special cylindriconical steel
Ø 110mm with spigot
Ø 90 x 110mm
Heights: 6.5m, 7.5m, 8.5m and 9.5m
Wall bracket: aluminium
Outreach 400mm and 1315mm
Pathway bracket: aluminium
Outreach 40 mm on a collar clamp
Elipt Tonga assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket, double
bracket, wall bracket
Recommended height: 6 to 9m
Tonga bracket: steel
Outreach 1000mm
Luminaire side-mounted with a swivel joint
Bracket post top mounted on the pole
Wall bracket: steel
Outreach 500mm
Pole: cylindroconical steel Ø 60/62mm
9 m
10 m
8 m
7 m
6 m
5 m
EL
IPT
Lum
ière
Range | L
um
inaire
desig
ned
by: J
-M W
ILM
OTTE
ELIPT ARCHITEK
ELIPT CYTISE ELIPT PROFIL
ELIPT VECTEUR
Elipt Architek assembly
Design J-M Wilmotte
Confi gurations: single bracket, double
bracket, wall bracket, rear bracket
Architek bracket: aluminium
Outreach 615mm, 915mm and 1315mm
Luminaire side-mounted with a swivel joint
Bracket post top mounted
Pole: special cylindroconical steel
Ø 110mm with spigot
Ø 90 x 110mm
Heights: 6.5m, 7.5m, 8.5m and 9.5m
Wall bracket: aluminium
Outreach 1000mm
Pathway bracket: aluminium
Outreach 400mm on a collar clamp
Elipt Profi l assembly
Design J-M Wilmotte
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Profi l bracket: aluminium
Outreach 1200mm
Luminaire side-mounted with a swivel joint
Bracket post top mounted
Pole: special cylindroconical steel
Ø 110mm with spigot
Ø 90 x 110mm
Heights: 6.5m, 7.5m, 8.5m and 9.5m
Wall bracket: aluminium
Outreach 1200mm
Pathway bracket: aluminium
Mounted on a fastening plate
Elipt Cytise assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Cytise bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Shown with decorative aluminium tip
(optional, cf. page 299)
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm and 800mm
Elipt Vecteur assembly
Design J-M Wilmotte
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Vecteur bracket: aluminium
Outreach 1200mm and 1800mm
Luminaire mounted on a U-bracket adjus-
table by lateral crankpins
Bracket post top mounted
Pole: special cylindroconical steel
Ø 110mm with spigot
Ø 90 x 110mm
Heights: 6.5m, 7.5m, 8.5m and 9.5m
Wall bracket: aluminium
Outreach 700mm and 1200mm
Pathway bracket: aluminium
Outreach 700mm
93
INDICELumière Range
INDICE
This is a luminaire that plays it cards close to its chest, and this was the intention that inspired the creation
of Indice, launched in 2005.
Behind its apparent soberness, when you look closer this luminaire reveals a more playful temperament,
offering a cheerful range of domes, bowls, brackets and fastenings.
For different uses, different contexts, different intentions, the lighting designer has an «interactive» choice,
enabling him to play with the amusing simplicity of the Indice components to compose his solutions.
Indice comes in two sizes, both included
in the «Image» and «Lumière» offers
There is a extensive choice of brackets,
arms and poles for combination with the
luminaires
Indice also benefi ts from the latest
developments in ECLATEC LED
technology (ORALEDS module, ORALENS
lenses, ORADRIVE driver)
LUMIERE RANGE
IMAGE RANGE // page 44 LUMINAIRES // page 160 LED // page 214
IND
ICE
Lum
ière
Range
95
INDICELumière Range
INDICE CATELUX
INDICE CILIA
Indice Cilia assembly
Assembly possible with Indice versions:
Graphic, Spiral and Volute
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Cilia bracket: aluminium
Outreach 800mm, 1000mm and 1200mm
Tilt 0°
Suspended version of the luminaire fi xed
by Ø ¾” thread onto the bracket
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Pathway bracket: aluminium
Outreach 500mm
Wall bracket: aluminium
Outreach 800mm and 1000mm
Indice Catelux assembly
Assembly possible with Indice versions:
Graphic, Spiral, Volute and Parabol
Confi guration: single light
Recommended height: 6 to 9m
Catelux catenary mounting:
see page 296
9 m
10 m
8 m
7 m
6 m
5 m
IND
ICE
Lum
ière
Range
INDICE CURVED POLE
INDICE NOA
INDICE PARA
INDICE SAÏA
Indice Para assembly
Assembly possible with the Indice Graphic
model
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Para bracket: aluminium
Outreach 800mm, 1000mm and 1200mm
Tilt 0°
Suspended spoon mounting of the
luminaire on the bracket
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 800mm
Pathway bracket: aluminium
Outreach 500mm
Indice Noa assembly
Assembly possible with the Indice Graphic
model
Confi gurations: single bracket, asymme-
trical double bracket, pathway bracket
Noa bracket: aluminium
Outreach 700mm and 1200mm
Close coupled mounting of the luminaire
on the bracket
Bracket post top mounted
Pole: special cylindroconical steel
Ø 110mm with spigot
Ø 90 x 110mm
Heights: 6.5m, 7.5m and 8.5m
Pathway bracket: aluminium
Outreach 700mm
Indice curved pole assembly
Assembly possible with the Indice Graphic
model
Confi gurations: single bracket, pathway
bracket
Recommended height: 6 to 9m
Bracket: steel
Outreach 800mm, 1000mm and 1200mm
Pole: cylindroconical curved steel
Pathway bracket: steel
Outreach 500mm
Indice Saïa assembly
Assembly possible with the Indice Graphic
model
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Saïa bracket: aluminium
Outreach 800mm, 1000mm and 1200mm
Tilt 5°
Indice luminaire mounted on a swivel-type
side U-bracket
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Pathway bracket: aluminium
Outreach 300mm
Wall bracket: aluminium
Outreach 800mm
97
CHORUSLumière Range
CHORUS
Chorus is disconcertingly simple and ruse-free, but beyond this apparent straightforwardness it soon be-
comes apparent that discretion has to be earned.
Its silhouette escapes banality thanks to a reassuring balance; it attracts just the right amount of attention
in the urban panorama, without exaggeration, by offering a versatile, ever-renewed modernity.
Chorus comes in two sizes, both
included in the «Lumière» collection
Multiple bracket and arm combinations
are suggested
Chorus also benefi ts from the latest
developments in ECLATEC LED
technology (ORALEDS module, ORALENS
lenses, ORADRIVE driver)
LUMIERE RANGE LUMINAIRES // page 162 LED // page 216
CH
OR
US
Lum
ière
Range
99
CHORUSLumière Range
CHORUS BASALT CHORUS KCA
Chorus Basalt assembly
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Basalt bracket: aluminium
Outreach 800mm, 1000mm and 1200mm
Luminaire side-mounted with a swivel joint
Bracket post top mounted
Shown with decorative aluminium tip
(optional, cf. page 299)
Pole: cylindroconical steel Ø 60/62mm
Chorus KCA assembly
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
KCA bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Shown with “Friday” cast aluminium trim
(optional, cf. page 298)
Pole: cylindroconical steel Ø 60/62mm
9 m
10 m
8 m
7 m
6 m
5 m
CHORUS LIMA CHORUS TRACK CHORUS SAÏAN
Chorus Lima assembly
Bracket designed by: M. Sindall
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Lima bracket: bracket consisting of alumi-
nium profi le arm with a decorative tie-rod
on a central cast iron piece
Outreach 1000mm
Tilt 45°
Luminaire side-mounted with a swivel joint
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Chorus Saïan assembly
Bracket designed by: M. Sindall
Confi gurations: single bracket, double
bracket
Saïan bracket: aluminium
Outreach 1000mm and 1500mm
Tilt 5°
Luminaire side-mounted with a swivel joint
Bracket top mounted on the pole
Pole: special cylindroconical steel
Ø 110mm with spigot
Ø 90 x 110mm
Heights: 6.5m, 7.5m, 8.5m and 9.5m
Pathway bracket: aluminium swivel
fastening plate
Wall bracket: aluminium
Outreach 1000mm
Chorus Track 24 assembly
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Track 11 and Track 24 tips: tubular steel
Luminaire side-mounted with a swivel joint
Male mounting bracket for pole top fi tting
Shown with decorative aluminium tip
(optional, cf. page 299)
Pole: cylindroconical steel Ø 60/62mm
101
CH
OR
US
Lum
ière
Range
METROLumière Range
METRO
Metro sets the tone in a magical score. Behind this note, this line, this arch, this outline there is a soul,
which invites you to compose; and Metro can be sung to the music of a series of different brackets.
Metro, in these combinations, provides the modern, lively beat that softly accompanies the urban
symphony.
Metro comes in three sizes, included in
the «Lumière» collection
Multiple bracket and arm combinations
are possible
Metro also benefi ts from the latest
developments in ECLATEC LED
technology (ORALEDS module, ORALENS
lenses, ORADRIVE driver)
LUMIERE RANGE LUMINAIRES // page 164 LED // page 218
METRO
ME
TR
O L
um
ière
Range
103
METRO MASSAI METRO TECLA
Metro Técla assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Técla bracket: aluminium
Outreach 800mm, 1000mm and 1200mm
Luminaire suspended with a swivel joint
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 800mm
Pathway bracket: aluminium
Outreach 800mm
Metro Massaï assembly
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Maka bracket: tubular aluminium
Ø 60mm curved
(shown here without the ringed trim)
Outreach 650mm
Luminaire suspended by Ø ¾” thread
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
9 m
10 m
8 m
7 m
6 m
5 m
METROLumière Range
ME
TR
OLum
ière
Range METRO CILIA METRO NOA
METRO SALOME METRO SAXO
Metro Noa assembly
Confi gurations: single bracket, asymme-
trical double bracket, pathway bracket
Noa bracket: aluminium
Outreach 700mm and 1200mm
Luminaire suspended with a swivel joint
Bracket post top mounted
Pole: cylindroconical steel Ø 110mm, with
spigot Ø 90 x 110mm
Heights: 6.5m, 7.5m and 8.5m
Pathway bracket: aluminium
Outreach 700mm
Metro Salomé assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Salomé bracket: aluminium
Outreach 700mm
Bracket height: 2m
Luminaire suspended with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 89mm
Heights: 5m, 6m and 7m
Wall bracket: aluminium
Outreach 700mm
Pathway bracket: aluminium
Outreach 700mm
Metro Saxo assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Saxo bracket: aluminium
Outreach 650mm and 1200mm
Tilt 15°
Luminaire suspended with a swivel joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 650mm and 1200mm
Pathway bracket: aluminium
Outreach 1200mm
Metro Cilia wall bracket
Confi guration: wall bracket
Recommended height: 6 to 9m
Wall bracket: aluminium
Outreach 800mm and 1000mm
Tilt 0°
Luminaire suspended by Ø ¾” thread
105
CYTISELumière Range
CYTISE
Cytise is a surge, an outburst, with a strong urban message, almost biting, certainly quick to liven up an
atmosphere.
Its candid personality punctuates the space, and its balanced, ever up-to-date lines make a city favourite.
Cytise comes in two sizes, both included
in the «Lumière» collection
Multiple bracket and arm combinations
are possible
LUMIERE RANGE LUMINAIRES // page 166
CY
TIS
ELum
ière
Range
107
CYTISE KINO
CYTISE SHAMA
Cytise Kino assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Kino bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 20°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 800mm
Pathway bracket: steel
Outreach 800mm
Cytise Shama assembly
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Shama bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 20°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
9 m
10 m
8 m
7 m
6 m
5 m
CYTISELumière Range
CY
TIS
ELum
ière
Range
APPLIQUE CYTISE
CYTISE CYTISE KINO
Cytise wall bracket
Confi guration: wall bracket
Recommended height: 6 to 9m
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Luminaire side mounted onto the bracket
CYTISE
Cytise assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Cytise bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm, 1000mm and
1200mm
Pathway bracket: steel
Outreach 600mm and 800mm
Cytise Kino assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Kino bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 20°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 800mm
Pathway bracket: steel
Outreach 800mm
APPLIQUE CYTISE
109
NANTUALumière Range | Design: FORMA 6
NANTUA
Nantua marks a discrete presence in our urban landscape, dotting the city traffi c and its swirling ballet with
a thousand lights.
Always up-to-date, its pointed shape becomes a discrete landmark in urban life, among the unceasing
toing and froing of passers-by and city dwellers.
When night falls, this precious triangle guides our path, providing indispensable light and thus completing
its task.
Nantua comes in two sizes, both
included in the «Lumière» collection
Nantua is proposed in combination with
an aluminium U-bracket, holding the
body of the luminaire by pins in the side
LUMIERE RANGE LUMINAIRES // page 168
NA
NT
UA
Lum
ière
Range | D
esig
n: F
OR
MA
6
111
NANTUALumière Range | Design: FORMA 6
NANTUA PARDO
NANTUA SCADA
Nantua Scada assembly
Luminaire designed by Forma 6
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Scada bracket: steel
Outreach 1000mm
Luminaire held by lateral pins
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Nantua Pardo assembly
Luminaire designed by Forma 6
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Pardo bracket: aluminium
Outreach 440mm
Luminaire held by lateral pins
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 440mm
Pathway bracket: aluminium
Outreach 440mm
9 m
10 m
8 m
7 m
6 m
5 m
NA
NT
UA
Lum
ière
Range | D
esig
n: F
OR
MA
6
NANTUA SCADA
NANTUA SORINIERES
NANTUA SORINIERES
NANTUA SORINIERES
Nantua Sorinières assembly
Design by Forma 6
Confi gurations: single bracket, double
bracket, triple bracket, wall bracket,
pathway bracket
Recommended height: 6 to 9m
Sorinières bracket: aluminium
Outreach 1750mm
Luminaire held by lateral pins
Bracket fi xed onto the pole by cast alumi-
nium collar clamps
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 1500mm
Pathway bracket: aluminium
Nantua Sorinières wall bracket
Design by Forma 6
Confi guration: wall bracket
Recommended height: 6 to 9m
Wall bracket: aluminium
Outreach 1500mm
Luminaire held by lateral pins
Nantua Scada assembly
Luminaire designed by Forma 6
Confi gurations: single bracket, double
bracket, pathway bracket
Recommended height: 6 to 9m
Scada bracket: steel
Outreach 1000mm
Luminaire held by lateral pins
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Pathway bracket: steel
113
ROCHELONGUELumière Range | Design: J-M WILMOTTE
9 m
8 m
7 m
6 m
5 m
Rochelongue assembly
Design J-M Wilmotte
Confi gurations: single bracket, double brac-
ket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Rochelongue bracket: aluminium with
tie-rod
Outreach 1200mm and 1400mm
Luminaire side mounted onto the bracket
Bracket fi xed onto the pole by cast collar
clamps
Pole: special cylindroconical steel
Wall bracket: aluminium
Outreach 1200mm
Luna pathway bracket: aluminium
LUMINAIRES // page 171
Lumière Range | Design: J-M WILMOTTE
LUMINAIRES // page 171
RO
CH
EL
ON
GU
E L
um
ière
Range | D
esig
n: J
-M W
ILM
OTTE
115
CLIP EVOLUTIONLumière Range | Luminaire designed by: M. AUREL
CLIP
Clip remains an acknowledged precursor in the lighting world.
Its basic qualities, a design that is at once assertive, contemporary and elegant, make this a model that
cannot be overlooked.
Ever-ready to take up the challenge of functional lighting, Clip can also adopt a more urban style, combi-
ned with the Cliptown and Clipart brackets.
Its bold design, a skilful union of the concepts of rupture and continuity, has earned ECLATEC a «Janus de
l’Industrie» prize.
Clip is available in two dimensions, both
included in the «Lumière» collection
Multiple combinations of steel and
aluminium brackets and arms are
possible
Clip Evolution has kept up with the latest changes in sources and takes the new refl ectors (Optiotec® 27), but also innovative
technical solutions taking advantage of the luminaire housing (camera, …)
LUMIERE RANGE LUMINAIRES // page 178
CL
IP E
VO
LUT
ION
Lum
ière
Range | L
um
inaire
desig
ned
by: M
. AU
RE
L
117
CLIP EVOLUTION
Lumière Range
Luminaire designed by: M. AUREL
CLIPART CLIPTOWN
Cliptown assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Cliptown bracket: cast aluminium
Outreach 820mm and 1300mm
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Poles:
- cylindroconical steel pole, Ø 76mm for
Cliptown bracket, outreach 1300mm
- cylindroconical steel pole, Ø 60/62mm
for Cliptown bracket, outreach 820mm
Wall bracket: aluminium
Outreach 1500mm
Pathway bracket: aluminium
Outreach 500mm
Clipart assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Clipart bracket: cast aluminium
Outreach 1000mm
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
9 m
10 m
8 m
7 m
6 m
5 m
CL
IP E
VO
LUT
ION
Lum
ière
Range | L
um
inaire
desig
ned
by: M
. AU
RE
L
CLIP CYTISE CLIP ETIA CLIP GOLF CLIP PRIMA
Clip Golf assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Golf bracket: steel
Outreach 800mm, 1000mm and 1500mm
Tilt 5°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 500mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 500mm, 800mm and 1000mm
Clip Prima assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Prima bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 15°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Shown with LED luminous tip (optional, cf.
page 299)
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm
Clip Etia assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Etia bracket: aluminium
Outreach 800mm, 1000mm and 1200mm
Tilt 5°
Luminaire side mounted onto the bracket
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 800mm
Pathway bracket: aluminium
Outreach 800mm
Clip Cytise assembly
Luminaire designed by M. Aurel
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Cytise bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm
119
MURENALumière Range
MURENA
Offering more than just functionality, Murena’s lines provide elegance in discretion.
Inspired by Italian design, it has a resolutely modern and dynamic silhouette.
And yet Murena is still formidably effi cient, simple to fi t and offering easy access to its components.
Murena comes in a single size; the
luminaire is part of the «Lumière»
collection
Multiple combinations of arms, brackets
and trims are available
LUMIERE RANGE LUMINAIRES // page 180
MU
RE
NA
Lum
ière
Range
121
MURENALumière Range
MURENA BERRY
MURENA CYTISE
Murena Cytise assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Cytise bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm
Murena Berry assembly with trim
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Berry bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Shown with Murena cast aluminium trim
(optional, cf. page 298)
Pole: cylindroconical steel Ø 60/62mm
9 m
10 m
8 m
7 m
6 m
5 m
MU
RE
NA
Lum
ière
Range
MURENA LAZIO MURENA PARA MURENA PRIMA MURENA TOP
Murena Para assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Para bracket: aluminium
Tilt 0°
Outreach 800mm, 1000mm and 1200mm
Luminaire side mounted onto the bracket
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 800mm
Pathway bracket: aluminium
Outreach 500mm
Murena Top assembly
Confi guration: single light assembly
Recommended height: 6 to 9m
Pole: cylindroconical steel Ø 60/62mm
Murena Prima assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Prima bracket: steel
Outreach 800mm, 1000mm and 1200mm
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: aluminium
Outreach 600mm
Murena Lazio assembly
Confi guration: single light assembly
Recommended height: 6 to 9m
Lazio bracket: steel
Outreach 1000mm
Tilt 5°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
123
PALEOLumière Range
PALEO
Paleo is the successful synthesis of principle and reality. Its accomplished and up-to-date shape also talks
functionality - and in this respect, Paleo offers a multitude of advantages, adaptability, easy opening and a
spacious control gear compartment.
Its sober silhouette conveys a genuine sense of effi ciency, and it is perfectly suited the lighting of main
roads as well as the outskirts of cities.
Paleo comes in just one size, and can
take sources up to 400 W; it is part of
the «Lumière» collection
Multiple bracket and arm combinations
are offered
Since 2009, Paleo has had a tray made of glass fi bre-reinforced polyamide, for greater durability and better insulation.
LUMIERE RANGE LUMINAIRES // page 182
Lumière Range
PA
LE
OLum
ière
Range
125
PALEOLumière Range
PALEO CURVED POLE PALEO CYTISE
Paleo Top assembly on curved pole
Confi guration: single light assembly
Pole: curved cylindroconical steel
Pole height: 6 to 9m
Paleo Cytise assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Cytise bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm
9 m
10 m
8 m
7 m
6 m
5 m
PA
LE
OLum
ière
Range
PALEO ETNA PALEO PRIMA PALEO TOP PALEO PRIMA
Paleo Top assembly
Confi guration: single light assembly
Recommended height: 6 to 9m
Pole: cylindroconical steel Ø 60/62mm
Paleo Prima wall bracket
Confi guration: wall bracket
Recommended height: 6 to 9m
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Luminaire side mounted onto the wall
bracket
Paleo Etna assembly
Confi gurations: single bracket, double
bracket, wall bracket
Recommended height: 6 to 9m
Etna bracket: steel
Outreach 500mm, 1000mm and 1200mm
Tilt 5°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 500mm and 1000mm
Paleo Prima assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Prima bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 15°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm
127
ECLATLumière Range
ECLAT
When the function creates the object ...
Eclat is the result of an approach that prioritises the qualities of functionality and robustness.
The solutions chosen are simple and have proved their worth, and we can expect this luminaire to continue
to serve as a faithful auxiliary.
Eclat comes in a single size; the
luminaire belongs to the «Lumière»
collection
Several combinations of brackets and
arms are offered
LUMIERE RANGE LUMINAIRES // page 184
Lumière Range
EC
LA
TLum
ière
Range
129
ECLATLumière Range
Eclat Berry assembly
Confi gurations: single bracket, double
bracket
Recommended height: 6 to 9m
Berry bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 10°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Eclat Pico assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Pico bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 5°
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 500mm
Pathway bracket: steel
Outreach 500mm
ECLAT BERRY ECLAT PICO
9 m
10 m
8 m
7 m
6 m
5 m
EC
LA
TLum
ière
Range
Eclat Cytise wall bracket
Confi guration: wall bracket
Recommended height: 6 to 9m
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Luminaire side mounted onto the wall
bracket
Eclat Prima assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Prima bracket: steel
Outreach 800mm, 1000mm and 1200mm
Tilt 15°
Luminaire side mounted onto the bracket
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: steel
Outreach 600mm, 800mm and 1000mm
Pathway bracket: steel
Outreach 600mm
Eclat KCR assembly
Confi gurations: single bracket, double
bracket, wall bracket
Recommended height: 6 to 9m
KCR bracket: aluminium
Outreach 750mm and 1000mm
Tilt 15°
Luminaire side mounted onto the bracket
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 750mm
Eclat Para assembly
Confi gurations: single bracket, double
bracket, wall bracket, pathway bracket
Recommended height: 6 to 9m
Para bracket: aluminium
Outreach 800mm, 1000mm and 1200mm
Luminaire side mounted onto the bracket
Bracket post top mounted
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 800mm
Pathway bracket: aluminium
Outreach 500mm
ECLAT CYTISE ECLAT PARA ECLAT PRIMA ECLAT KCR
131
DUPLEXLumière Range | Design: J-M WILMOTTE
9 m
8 m
7 m
6 m
5 m
Duplex assembly
Design J-M Wilmotte
Confi gurations: single bracket, double
bracket, wall bracket
Recommended height: 7 to 9m
Bracket: aluminium with stay wire
Outreach 850mm
Tilt 10°
Luminaire fastened onto the bracket by
decorative connector
Male mounting bracket for pole top fi tting
Pole: special cylindroconical steel
Wall bracket: aluminium with stay wire
Outreach 850mm
Double Simple Wall Bracket
LUMINAIRES // page 190
Lumière Range | Design: J-M WILMOTTE
LUMINAIRES // page 190
DU
PL
EX
Lum
ière
Range | D
esig
n: J
-M W
ILM
OTTE
133
CLIMATLumière Range
9 m
8 m
7 m
6 m
5 m
Climat assembly
Confi gurations: single bracket, double bracket, wall
bracket, rear bracket
Climat bracket: aluminium
Outreach 600mm, 800mm and 1000mm
Luminaire side mounted onto the bracket
Bracket post top mounted
Bracket fastened onto the Jump pole by a cast clamp
Poles:
- cylindroconical steel Ø 60/62mm
Height: 6 to 9m
- tapered galvanised steel Jump pole Ø 114mm
Heights: 6.2m and 7.2m
Wall bracket: aluminium
Outreach 600mm and 800mm
Pathway bracket: aluminium
Outreach 600mm
LUMINAIRES // page 191
Steel pole Jump pole Steel pole
LUMINAIRES // page 191
CL
IMA
T L
um
ière
Range
135
BTXLumière Range
9 m
8 m
7 m
6 m
5 m
BTX assembly
Confi gurations: single bracket, double bracket,
wall bracket, pathway bracket
Recommended height: 6 to 9m
BTX U-bracket arm on curved pole: steel
Luminaire fastened by an adjustable lateral
U-bracket onto the fi tting
BTX U-bracket: steel
Luminaire fastened by an adjustable lateral
U-bracket onto the fi tting
Bracket post top mounted
BTX Top: aluminium fi tting
Luminaire fastened by a lateral U-bracket onto
the fi tting
Bracket post top mounted
BTX U-bracket wall mounting: aluminium
Tilt 0°
Luminaire fastened by an adjustable lateral
U-bracket onto the wall bracket
LUMINAIRES // page 192
Curved pole BTX TopBTX U-bracket
arm
BTX U-bracket
wall mounting
BT
X L
um
ière
Range
137
12 m
11 m
10 m
9 m
QUADRILUX assembly
Confi gurations: single bracket, double
bracket, quadruple bracket
Recommended height: 12 to 16m
Bracket: Directly mounted on a tubular
bracket Ø 60mm or on a multi-holder fi tting
(square 70 x 70mm)
Pole: steel
Shown with decorative aluminium tip
(optional, cf. page 299)
QUADRILUXLumière Range
LUMINAIRES // page 193
QU
AD
RIL
UX
Lum
ière
Range
139
ORASTARLumière Range
9 m
8 m
7 m
6 m
5 m
EMERAUDE assembly
Confi gurations: single bracket, double bracket,
wall bracket, pathway bracket
Recommended height: 6 to 9m
Emeraude bracket: aluminium
Outreach 590mm, 1200mm and 1500mm
Tilt 15°
Luminaire side mounted or suspended with a swivel
joint
Male mounting bracket for pole top fi tting
Pole: cylindroconical steel Ø 60/62mm
Wall bracket: aluminium
Outreach 590mm and 1500mm
Pathway: aluminium
Outreach 590mm
Optional: Emeraude base
LUMINAIRES // page 194
Wall bracketEmeraude base
Lumière Range
ERAUDE assembly
LUMINAIRES // page 194
OR
AS
TA
R L
um
ière
Range
141
143
Luminaires
Image RangeLumière RangeLuminairesLED LuminairesColumns and bollards
Wooden range Floodlights and built-in lightingStandalone lighting SpecialitiesTechnical annex
145
Luminaires
Contents
Enza // p. 146
Pixel // p. 148
Elyxe // p. 150
Sileo // p. 152
Stratus // p. 154
Abys // p. 156
Elipt // p. 158
Indice // p. 160
Chorus // p. 162
Metro // p. 164
Cytise // p. 166
Nantua // p. 168
Luna // p. 170
Rochelongue // p. 171
Idylle // p. 172
Orient // p. 174
Auris // p. 175
Gloria // p. 176
Clip Evolution // p. 178
Murena // p. 180
Paleo // p. 182
Eclat // p. 184
Oblic // p. 186
Yria // p. 187
Refl ex // p. 188
Refl ex GM // p. 189
Duplex // p. 190
Climat // p. 191
BTX // p. 192
Quadrilux // p. 193
Orastar // p. 194
Forvil // p. 195
ENZA Luminaires
Designed by M. AUREL
Information for specifi ers
Luminaire available in 2 sizes: Enza 25 and Enza 35
IP66
IK09 (Enza 25)
IK08 (Enza 35)
Class I or II
Injection die cast aluminium body
Refl ectors in polished, anodised aluminium: Optitec® 25 and Optitec® 35
Thermally toughened pressed glass bowl
Optional: self-cleaning glass
Multibox® control gear box (cf. page 300)
Power-on LED indicates main voltage presence
Easylink® fastening system enabling Top or Side mounting
Luminaire opens without tools
Polyester powder coating, any RAL colour available
ENZA
Eco design
Enza includes ferromagnetic and electronic
ballasts and dimming solutions
Enza is eligible for the Energy Effi ciency
Certifi cate, ULOR < 3%
Complies with the European RoHS directive
High recyclability rate
Material analysis
Enza 25: Aluminium 66%, Glass 16%,
Polyamide 12%, Others 5%, Steel 1%
Enza 35: Aluminium 60%, Glass 23%,
Polyamide12%, Others 4%, Steel 1%
Weight - Windage (with max. control
gear)
Enza 25: 14.2 kg - 0.037m² - 150W
Enza 35: 19.2 kg - 0.050m² - 400W
Sources
Model HPS MH MH G12 MH PGZ12 MH PGZ18 Fluocompact
Enza 25
Optitec® 25
50W (E27) 35W (E27) 35W 45W / 26W
70W (E27) 70W (E27) 70W 60W / 32W
100W (E40) 100W (E40) 100W 90W / 42W
150W (E40) 150W (E40) 150W 140W / /
Enza 35
Optitec® 35
100W (E40) 100W (E40) / 90W / /
150W (E40) 150W (E40) / 140W / /
25 W (E40) 250W (E40) / / 210W * /
400W (E40) 400W (E40) / / 315W * /
*: available as soon as the lamp comes onto the market
845
213
394
687
188
334
ENZA 25 ENZA 35
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature extruded silicone pneumatic seal on the top and bottom parts
Luminaire breathes through activated carbon fi lter
Cable gland with anchoring device
IP 67 cable grommet for other cable
EN
ZA
Lum
inaire
s | Desig
n b
y M
. AU
RE
L
Photometric distributions _ Multiple lamp adjustment possibilities. Typical photometric data
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
400
0
I max = 656 cd/klm
0%
10%
20%
50%52%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Enza 25 - Optitec® 25 - MH 150W E40
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
400
0
I max = 384 cd/klm
0%
10%
20%
50%48,7%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Enza 25 - Optitec® 25 - HPS 150W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
400
0
I max = 734 cd/klm
0%
10%
20%
50%56,3%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Enza 35 - Optitec® 35 - CW 140W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
400
0
I max = 414 cd/klm
0%
10%
20%
50%49,1%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Enza 35 - Optitec® 35 - HPS 250W
Mechanical interfaces
The Easylink® fastening system is an Eclatec innovation
It allows quick, easy installation and precise adjustment of the tilt angle thanks to its two
sets of angle markings with a scale graduated in 5° steps
Top mounting on Ø 60 and
62mm
Side mounting on tube up to Ø 60mm
Trim for Enza luminaire
(cf. page 298)
Air flows out when luminaire turns on
Air flows in when luminaire turns off
filter
Maintenance
- Opening and closing of the luminaire
Opens without tools by pressing the push-
strip on the top casting
Opening the luminaire gives direct access
to the Multibox® control gear box
- Control gear maintenance
Tipping up the Multibox® disconnects the
luminaire electrically
The control gear can be replaced in total
safety simply by swapping the Multibox®
- Maintenance of the lamp
Access to the lamp holder by tipping up
the Multibox®
The lamp is released after activating the
handle
The lamp can be replaced and adjusted
easily and in total safety
147
PIXEL Luminaires
Designed by STOA consultancy
Information for specifi ers
Luminaire available in 2 sizes: Pixel PM and Pixel GM
IP66
IK09
Class I or II
Injection die cast aluminium body
Reß ectors in polished, anodised aluminium
4 reß ectors: Optitec¨ 20 (Pixel PM), Optitec¨ 30 (Pixel GM),
Asymmetrical PM (Pixel PM), asymmetrical GM (Pixel GM)
Silkscreen printed, thermally toughened ß at glass
Multibox¨ control gear box (cf. page 300)
Power-on LED indicates main voltage presence
Top or Side version of luminaire mounting
Luminaire pre-wired in the factory
Luminaire opens without tools
Polyester powder coating, any RAL colour available
Eco design
Pixel includes ferromagnetic and electronic ballasts and dimming solutions
Pixel is eligible for the Energy EfÞ ciency CertiÞ cate, ULOR < 0 for 0¡ tilt
Complies with the European RoHS directive
High recyclability rate
PIXEL BY ECLATEC
Material analysis
Pixel PM: Aluminium 65%, Glass 15%,
Plastic 9%, Steel 7%, Other 4%
Pixel GM: Aluminium 72%, Glass 14%,
Plastic 9%, Steel 3%, Other 2%
Weight - Windage (with max. control
gear)
Pixel PM
11kg - 0.075m² - 150W
Pixel GM
18.7kg - 0.135m² - 250W
500
420
297
110
100
25
120
34
558
396
667
133
147
160
PIXEL PM
PIXEL GM
IP rating
Degree of protection IP66 according to standard EN 60 529
High temperature pneumatic extruded silicone gasket on cover
High temperature extruded silicone gasket on glass
Luminaire breathes through activated carbon Þ lter
IP67 cable grommet
PIX
EL
Lum
inaire
s | D
esig
ned
by S
TO
A c
onsulta
ncy
Photometric distributions Multiple lamp adjustment possibilities
Typical photometric data
Pixel GM - Optitec® 30 - HPS 250W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
500
0
cd/klm
0%
10%
20%
43,8%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 2°
Imax = 302 cd/klm
PIXEL PM - Optitec® 20 - MH 150W G12
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
640
0
cd/klm
0%
10%
20%
43,7%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 2°
Imax = 409 cd/klm
PM Top and Bitop:
For poles Ø 60 and 76mm
Luminaire tilted 2°, 5° and 10°
GM Top and Bitop:
For poles Ø 60, 76 and 89mm
Luminaire tilted 2°, 5° and 10°
L :
Side entry coupled with sleeve for
bracket ¯ 60mm
LAR :
Side entry coupled with sleeve for
rectangular tube 50 x 70mm (Pixel
PM) and 60 x 80mm (Pixel GM)
Maintenance
- Opening and closing of the luminaire
Opens without tools by pressing on the
press bar on the upper lid
Cover mechanically blocked in the open
position by a safety stay
Direct access to the Multibox¨ control gear
box and the lamp when the luminaire is
opened
- Control gear maintenance
Tipping up the Multibox¨ disconnects the
luminaire electrically
The control gear can be replaced in total
safety simply by swapping with the new
Multibox¨
- Maintenance of the lamp
The power is cut off as soon as the
luminaire is opened
Access to the lamp and its adjustments
- Multibox¨ (cf. page 300)
Sources
Modèle HPS MH MH G12 MH PGZ12 MH PGZ18 Fluocompact
Pixel PM
Optitec® 20
/ 35W (E27) 35W 45W / 26W
50W (E27) 50W (E27) 70W 60W / 42W
70W (E27) 70W (E27) 100W 90W / /
/ / 150W 140W / /
Pixel PM
asymmetrical PM
/ 35W (E27) 35W 45W / /
50W (E27) 50W (E27) 70W 60W / /
70W (E27) 70W (E27) 100W 90W / /
/ / 150W 140W / /
Pixel GM
Optitec® 30
/ 35W (E27) / / / /
70W (E27) 70W (E27) / / / 26W
100W (E40) 100W (E40) / 90W / 42W
150W (E40) 150W (E40) / 140W / /
250W (E40) 250W (E40) 250W / 210W* /
Pixel GM
asymmetrical GM
70W (E27) 70W (E27) / 90W / /
/ / 250W 140W / /
*: available as soon as the lamp comes onto the market
Mechanical interfaces
149
ELYXE Luminaires
Designed by L. DAVY
Information for specifi ers
6 versions: LX-R, LX-C, LX-A, LX-P, LX-I and LX-D
IP66
60 joules, versions with polycarbonate protective globe - IK08, other versions
Class I or II
Injection die cast aluminium body
Extruded aluminium arm
Reß ectors in polished, anodised aluminium
Control gear in the upper luminaire body
Thermally toughened glass
Clear polycarbonate protective globe on louvre and Domino versions
Luminaires pre-wired in the factory
Luminaire available in top mounted or suspended versions
Eco design
Elyxe includes ferromagnetic and electronic ballasts and dimming solutions
Elyxe is eligible for the Energy EfÞ ciency CertiÞ cate:
ULOR LX-R, LX-C, LX-A < 3%
ULOR LX-P, LX-I, LX-D < 20%
Complies with the European RoHS directive
Recyclability rate over 95 % for LX-A, C, I, R
Material analysis
LX-R, LX-C, LX-A: Aluminium 83%, Steel 9%, Glass 5%, Other 2%, Plastic 1%
LX-D: Aluminium 75%, Plastic 13%, Glass 6%, Steel 4%, Other 2%
LX-I: Aluminium 93%, Steel 5%, Other 2%
LX-P: Aluminium 79%, Plastic 14%, Steel 5%, Other 2%
Weight - Windage (with max. control
gear)
Weight: 16.5kg
LX-A, C, I, R: 0.08m² - 150W
LX-D, P: 0.16m² - 150W
ELYXE
Ø 680
720
669
Ø 680
ELYXE ELYXE SUSPENDED
LX-D LX-I
LX-R, C, ALX-P (Louver version)
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature pneumatic extruded silicone gasket on
cover
High temperature extruded silicone gasket on base
Luminaire breathes through activated carbon Þ lter
Cable gland with anchoring device
ELY
XE
Lum
inaire
s | D
esig
ned
by L
. DA
VY
Photometric distributions _ Multiple lamp adjustment possibilities. Typical photometric data
Elyxe, Circular reflector version - CW 60W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
160
0
10.00m0.00
10.00m
0.00
Imax = 262 cd/klm
Elyxe, Indirect version - MH G12 150W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
100
0
10.00m0.00
10.00m
0.00
Imax = 116 cd/klm
Elyxe, Road reflector version - MH 60W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
250
0
10.00m0.00
10.00m
0.00
Imax = 308 cd/klm
Mechanical interfaces
Mounting on standard pole ¯ 60/62mm or special pole ¯ 76mm with spigot
¯ 60 x 85mm
Top or suspended mounting on wall bracket with integrated connection box
Maintenance
- Upper body
Access to the lamp (except LX-I) and the control gear after opening the upper body by
undoing an invisible locking device
Safe maintenance thanks to electrical disconnection as soon as the upper body is ope-
ned and is held in the open position by a safety stay
- Lower body
This is opened and closed by means of two locking screws
The upper body swivels on a hinge to give free access to the lower body and therefore
the power supply cable secured by a cable
gland with anchoring device
Opening the lower body, for an LX-I, gives
direct access to the lamp after removing the
quarter turn sealing plug
Sources
Refl ector HPS (E27) HPS (E40) MH G12 MH (E27) MH (E40) MH PGZ12 Fluocompact
LX-R (road refl ector) 50W 70W 100W 150W 35W 70W 100W 150W 35W 70W 100W 150W 45W 60W 90W 140W / / /
LX-C (circular refl ector) 50W 70W 100W 150W 35W 70W 100W 150W 35W 70W 100W 150W 45W 60W 90W 140W / / /
LX-A (asymmetrical refl ector) 50W 70W / / 35W 70W 100W 150W 35W 70W / / 45W 60W 90W 140W / / /
LX-P (Louver) 50W 70W 100W 150W / / / / 35W 70W 100W 150W 45W 60W 90W 140W 36W 42W 57W
LX-I (Indirect) / / / / 35W 70W 100W 150W / / / / 45W 60W 90W 140W / / /
LX-D (Domino) / / / / 35W 70W 100W 150W / / / / / / / / / / /
Elyxe, Asymmetrical reflector version - CW 60W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
800
0
10.00m0.00
10.00m
0.00
Imax = 776 cd/klm
Elyxe, Domino version - MH G12 70W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
160
0
10.00m0.00
10.00m
0.00
Imax = 172 cd/klm
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
80
0
10.00m0.00
10.00m
0.00
Elyxe, Louvre version - MH 100W E40
Imax = 112 cd/klm
151
SILEO Luminaires
Design : J-M WILMOTTE
SILEOInformation for specifi ers
Luminaire available in 2 sizes:
Sileo PM and Sileo GM
IP65
IK07
Class I or II
Cast aluminium body
Reß ectors in polished, anodised aluminium, Optitec¨ 20, Optitec¨ 34
Pre-wired integrated control gear
Thermally toughened ß at glass
White opal PMMA underside
Lit by coloured LEDs (white, blue, red, green and amber)
PM = 8W
GM = 22W
Separate switching of the lighting of the underside and the main source is possible
Sources
Model HPS MH MH G12 MH PGZ12
Sileo PM 35W (E27) 35W (E27) 70W 60W
70W (E27) 70W (E27) 100W 90W
/ / 150W /
Sileo GM 100W (E40) 100W (E40) / 90W
150W (E40) 150W (E40) / 140W
250W (E40) 250W (E40) / /
400W (E40) 400W (E40) / /
Eco design
Sileo includes ferromagnetic and electronic
ballasts and dimming solutions
Sileo is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3%
Complies with the European RoHS
directive
High recyclability rate
Material analysis
Sileo PM: Aluminium 89%, Glass 4%,
Steel 1%, Plastic 2%, Other 4%
Sileo GM: Aluminium 86%, Glass 5%,
Steel 1%, Plastic 4%, Other 4%
Weight - Windage (with max. control
gear)
Sileo PM: 16.2kg - 0.07m² - 150W
Sileo GM: 43.1kg - 0.19m² - 400W
375
2181707
98¡
646
166
457
284
SILEO PM SILEO GM
IP rating
Degree of protection IP65 according to standard EN 60529
High temperature pneumatic extruded silicone gasket on underside
Cable gland with anchoring device
SIL
EO
Lum
inaire
s | D
esig
n : J
-M W
ILM
OTTE
Photometric distributions _ Multiple lamp adjustment possibilities. Typical photometric data
Sileo - CW 140W
0%
10%
20%
51,8%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 8°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270Imax = 444 cd/klm
Sileo - HPS 150W
0%
10%
20%
61%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 8°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270Imax = 514 cd/klm
Mechanical interfaces
Direct mounting onto Sileo aluminium bracket
Possibility of extending the bracket by means of a 350mm or 700mm long aluminium
casting extension piece (Sileo GM only)
Sileo GM
Bracket top mounted on the special pole ¯ 110mm
Sileo PM
Decorative spigot top mounted on the special pole ¯ 90mm
Support
Sileo GM
Special cylindroconical steel pole, ¯ 110mm with spigot
¯ 90 x 110mm
Aluminium bracket with ß uted design
Tilt 8¡
Sileo PM
Special cylindroconical steel pole, ¯ 90mm with spigot
¯ 70 x 100mm
Fluted decorative spigot
Finitions
Pole with colourless anodised aluminium
Þ nish
Eclatec grey (cast iron grey) or sandy Þ nish
luminaire:
grey brown - RAL 8019
steel blue - RAL 5011
forest green - RAL 6009
Umbra grey - RAL 7022
white aluminium - RAL 9006
Annapurna white - RAL 1036
Maintenance
- Opening and closing of the luminaire
Luminaire opens by hinging open the
lower body
The power is cut off as soon as the
luminaire is opened
- Control gear maintenance
Control gear integrated on a removable
tray
Electrical connection using connectors
- Maintenance of the lamp
Direct access to the lamp by swivelling the
lower body after removing the 2 plugs and
2 quarter turn screws
153
RAL 9006 Annapurna
white
RAL 7022
RAL 6009
ECLATEC
grey
RAL 5011RAL 8019
STRATUS Luminaires
STRATUSInformation for specifi ers
2 versions: Stratus R and Stratus C
IP66
IK10
Class I and II
Injection die cast aluminium body
Reß ectors in polished, anodised aluminium, Optitec¨ 20
Sealed optical unit consisting of a polycarbonate prismatic crystal diffuser-
reß ector and a sealed ß at glass
Control gear integrated on a removable tray
Luminaire available in suspended or catenary versions
Polyester powder coating, any RAL colour available
Eco design
Stratus includes ferromagnetic and elec-
tronic ballasts and dimming solutions
Complies with the European RoHS
directive
Recyclability rate of over 90%
ULOR < 20%
Material analysis
Stratus: Aluminium 62%, Steel 1%, Plastic
31%, Others 6%
Weight - Windage (with max. control
gear)
Stratus : 5kg - 0,13m² - 150W
Sources
Model HPS MH MH PGZ12
Stratus R
Optitec¨ 20
/ 35W (E27) 45W
70W (E27) 70W (E27) 60W
/ / 90W
/ / 140W
Stratus C 70W (E27) 70W (E27) /
100W (E40) 100W (E40) /
150W (E40) 150W (E40) /
398
201
455
¯ 153
¯ 411
STRATUS
IP rating
Degree of protection IP66 according to standard EN 60529
Luminaire breathes through activated carbon Þ lter
High temperature pneumatic extruded silicone gasket on body
ST
RA
TU
S L
um
inaire
s
Photometric distributions _ Multiple lamp adjustment possibilities. Typical photometric data
Imax = 435 cd/klm
Stratus C - MH G12 150W
0%
10%
20%
34%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270 Imax = 530 cd/klm
Stratus R - Optitec® 20 - CW 90W
0%
10%
20%
45,2%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270
Mechanical interfaces
SRL: Stratus Suspended with plain swivel pivot
SR: Stratus Suspended with swivel pivot
SC: Stratus Suspended Catenary
Refl ector
Diffuser
Prismatic crystal diffuser-reß ector
Maintenance
Stratus C
- Opening and closing of the luminaire
Luminaire opens by means of a fast acting
thread screw and tipping the lower section
Access to all the components as soon as
the luminaire is opened
- Maintenance of the lamp
Lamp mounted on a quarter turn sealed
box removable without tools
Stratus R
- Opening and closing of the luminaire
Luminaire opens by means of a fast acting
thread screw
- Control gear maintenance
Removable tray
Lamp mounted on removable optical
compartment which can be removed
without tools
155
ABYS Luminaires
Design : J. SCHNELL - Urbanica
Imax = 77 cd/klm
Abys - MH G12 150W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
80
0
15.00m0.00
15.00m
0.00
Information for specifi ers
IP 54
IK07
Class II
Spherical transparent ribbed polycarbonate bowl ¯ 500mm
ÇHand-blownÈ self coloured glass trim which integrates the lighting system.
Other colours on request
Polished, anodised aluminium reß ector
Supplied pre-wired with lamp and control gear
Special box with electronic control gear in the bottom of the pole
Accessory: coloured Þ lter
Optional: trim lit by LEDs
Photometric distributions Typical photometric data
Sources
Model MH G12
Abys 35W
70W
100W
150W
Mechanical interfaces
Cylindriconical special pole ¯ 90mm
Heights: 3m, 3.5m and 4m
ABYS
1000
¯ 500
ABYS
LED system
AB
YS
Lum
inaire
s | D
esig
n : J
. SC
HN
ELL - U
rbanic
a
157
ÇIlluminating the half-light, revealing unsuspected
textures and colours, mastering the luminous ß ux ...
Whether it is on the ocean ß oor or on earth, nature
is full of organisms that use light to transform and
sublimate their environment.
An airy, luminous bubble, Abys has been designed to
provide a different lighting sensation. Its quality lies in
the unusual combination of unique, hand blown glass
parts with carefully machined aluminium parts.
Like a luminescent jewel, Abys is an urban lamp
pole whose design will provide a contemporary and
resolutely cheerful touch wherever it is installed.È
Julien Schnell
architect DPLG - Urbanica
ELIPT Luminaires
Design: J-M WILMOTTE
ELIPTInformation for specifi ers
Luminaire available 3 homothetic sizes: Elipt 45, Elipt 55, Elipt 65
IP66
Truncated-cone shape PMMA bowl IK07
Truncated-cone shape polycarbonate bowl IK10
Flat glass and rounded thermally toughened glass bowl IK08
Eclapak® version available, with sealed optical unit
Class I or II
Cast aluminium frame
Spun aluminium dome
Reß ectors in polished, anodised aluminium, Optitec¨ 20, 27 and 34
Control gear integrated on a removable tray
Luminaire available in top, side mounted, suspended or catenary versions
Luminaire opens without tools
Options: louver in mat black aluminium (truncated-cone shape and curved bowls
only), ß at silkscreen printed glass
Polyester powder coating, any RAL colour available
SourcesModel HPS MH MH PGZ12
Elipt 45 50W (E27) 35W (E27) 45W
70W (E27) 50W (E27) 60W
100W (E40) 70W (E27) 90W
150W (E40) 100W (E40) 140W
/ 150W (E40) /
Elipt 55 100W (E40) 100W (E40) 60W
150W (E40) 150W (E40) 90W
250W (E40) 250W (E40) 140W
Elipt 65 150 W(E40) 150W (E40) /
250W (E40) 250W (E40) /
400W (E40) 400W (E40) /
Eco design
Elipt includes ferromagnetic and electronic
ballasts and dimming solutions
Elipt is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3 %
Complies with the European RoHS
directive
Recyclability rate of over 95%
Material analysis
Elipt 45 curved bowl: Aluminium 68%,
Glass 19%, Steel 8%, Other 5%
Elipt 55 curved bowl: Aluminium 60%,
Glass 29%, Steel 7%, Other 4%
Elipt 65 truncated-cone shape bowl:
Aluminium 81%, Steel 8%, Plastic 7%,
Others 4%
Weight - Windage (with max. control
gear)
Elipt 45: 9.3kg - 0.07m² - 150W
Elipt 55: 11.5kg - 0.09m² - 250W
Elipt 65: 15.0kg - 0.13m² - 400W
450
156
550
183
650
183
450
205
550
237
650
243
450
190
550
270
650
260
ELIPT 45
Curved bowl
Truncated-cone
shape bowl
Flat glass
ELIPT 55 ELIPT 65
IP rating
Degree of protection IP66 according to
standard EN 60529
High temperature extruded silicone
pneumatic seal on bowl
Luminaire breathes through activated
carbon Þ lter
Cable gland with anchoring device
EL
IPT
Lum
inaire
s | D
esig
n : J
-M W
ILM
OTTE
Photometric distributions Multiple lamp adjustment possibilities
Typical photometric data
Elipt - Eclapak® 27 - MH 150W E40
0%
10%
20%
51,2%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 10°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270Imax = 508 cd/klm
Imax = 367 cd/klm
Elipt - Optitec® 27 -MH 150W E40
0%
10%
20%
49,1%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 10°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270
Imax = 444 cd/klm
Elipt - Optitec® 20 - CW 140W
0%
10%
20%
52,2%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 10°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270
Imax = 574 cd/klm
Elipt - Optitec® 34 - HPS 250W
0%
10%
20%
52,3%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 10°
- 90 ° 90 °
0 °- 45 ° 45 °640
0
cd/klm
C0 - C180C90 - C270
Mechanical interfaces
LRL: Elipt side entry with plain swivel joint coupled with sleeve for bracket
end with external ¯ 60mm
LR: Elipt side entry with swivel joint and ¯ ¾Ó thread for female boss
welded onto pole or bracket
Maintenance
- Opening and closing of the luminaire
Luminaire opens without tools by means
of 3 quarter turn wing screws
Protector swivels on an aluminium hinge
- Control gear maintenance
Direct access to the control gear by
hinging down the reß ector
The control gear is mounted in the
luminaire body on a removable tray
Electrical connection using quick
connectors
- Maintenance of the lamp
Direct access to the lamp after opening
the bowl diffuser, by means of 3 quarter
turn wing screws
Top: Elipt Top or Bitop Þ tting
for pole ¯ 60/62mm
Luminaire tilted to 10¡
LL: Elipt side entry coupled
with sleeve for bracket end
with external ¯ 60mm
Elipt LR on cast aluminium
fastening plate
Elipt LR on cast aluminium
wall bracket
SR: Elipt suspended with
swivel joint
CATELUX
cf. page 296
SCO: Elipt on catenary
mounting
159
Air expelled
when luminaire is
switched on
Air taken in
when luminaire is
switched off
INDICE Luminaires
INDICEInformation for specifi ers
Luminaire available in 2 homothetic sizes:
Indice 500 and Indice 620
IP66
Choice of bowls: curved, deeply curved and Çwater dropÈ bowls made of PMMA
IK07, ß at glass and curved bowl made of thermally toughened glass IK08
Class I or II
Injection die cast aluminium body
Reß ectors in polished, anodised aluminium, Optitec¨ 20, 27, 34 and
Multitec¨ 73 and 83
Control gear integrated on removable tray
Luminaire pre-wired in the factory
Choice of aluminium domes: Graphic, Spiral, Volute and Parabol
3 PMMA bowl Þ nishes: clear, opal and frosted
Opening without tools
Polyester powder coating, any RAL colour available
Sources
Model HPS MH MH PGZ12 Fluocompact
Indice 500 50W (E27) 35W (E27) 45W 26W
70W (E27) 70W (E27) 60W 32W
100W (E40) 100W (E40) 90W 42W
150W (E40) 150W (E40) 140W /
Indice 620 150W (E40) 150W (E40) 90W /
250W (E40) 250W (E40) 140W /
400W (E40) / / /
Eco design
Indice includes ferromagnetic and
electronic ballasts and dimming solutions
Indice is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3 % (except opal
bowl)
Complies with the European RoHS
directive
Recyclability rate of over 95%
Material analysis
IIndice Graphic 500: Aluminium 67%,
Glass 16%, Steel 10%, Plastic 2%, Other
5%
Indice Graphic 620: Aluminium 61%, Glass
25%, Steel 9%, Plastic 1%, Other 4%
Weight - Windage (with max. control
gear)
Indice Graphic 500:
11.2kg - 0.08m² - 150W
Indice Graphic 620:
16.5kg - 0.12m² - 400W
¯ 500 / ¯ 620
230 /
282
183 /
222
INDICE GRAPHIC
INDICE SPIRAL
INDICE VOLUTE
INDICE PARABOL
220 /
270
267 /
330
251 /
306
298 /
366
373 /
459
420 /
519
IND
ICE
Lum
inaire
s
Photometric distributions Multiple lamp adjustment possibilities
Typical photometric data
Imax = 512 cd/klm
Indice - Multitec® 73 - MH 150W E40
0%
10%
20%
49,4%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
- 90 ° 90 °
0 °- 45 ° 45 °640
0
cd/klm
C0 - C180C90 - C270
Imax = 651 cd/klm
Indice - Optitec® 20 - CW 60W
0%
10%
20%
52,6%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
- 90 ° 90 °
0 °- 45 ° 45 °320
0
cd/klm
C0 - C180C90 - C270
Imax = 544 cd/klm
Indice - Optitec® 34 - HPS 150W
0%
10%
20%
51,2%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
- 90 ° 90 °
0 °- 45 ° 45 °640
0
cd/klm
C0 - C180C90 - C270
Mechanical interfaces
SC: Indice Suspended spoon coupled with sleeve
to suit ¯ 60mm bracket arm (Graphic dome)
Choice of bowls
Maintenance
- Opening and closing of the luminaire
Opening of the luminaire without tools by
pressing the pushbutton integrated in the
luminaire body
Totally safe maintenance as power is cut
off when the luminaire is opened
Luminaire held open by a safety stay
- Control gear maintenance
Access to the electrical control gear and
optical unit as soon as the luminaire is
opened
- Maintenance of the lamp
Access to the lamp and the bowl by
hinging open the lantern
IP rating
Degree of protection IP66 according to standard EN 60 529
High temperature extruded silicone pneumatic seal on bowl
Luminaire breathes through activated carbon Þ lter
Cable gland with anchoring device
EL: Indice side entry Þ tting for bracket
end with external ¯ 60mm (any dome)
Top: Post top mounting
¯ 60mm
LL: Indice lateral U-
bracket (any dome)
LP: Indice top moun-
ted U-bracket (any
dome)
SM: Indice Suspended
with ¯ ¾Ó thread (any
dome)
SR: Indice suspended with
swivel joint (Graphic, Spiral
domes)
SC: Indice Suspended
Catenary (any dome),
CATELUX (cf. page 296)
Flat glass Curved glass Water drop
PMMA
Deeply curved
PMMA
161
CHORUS Luminaires
CHORUSInformation for specifi ers
Luminaire available in 2 homothetic sizes: Chorus 45, Chorus 55
IP66
Class I or II
Curved PMMA bowl IK07
Curved polycarbonate bowl IK10
Injected cast aluminium frame
Spun aluminium dome
Reß ectors in polished, anodised aluminium, Optitec¨ 27, 34, Multitec¨ 73, 83
Control gear integrated on a removable tray
Luminaire available in Top, lateral and suspended mounting
Luminaire opens without tools
Optional: coloured light strip integrated in the optical unit
Polyester powder coating, any RAL colour available
Sources
Model HPS MH MH PGZ12
Chorus 45 50W (E27) 35W (E27) 45W
70W (E27) 50W (E27) 60W
100W (E40) 70W (E27) 90W
150W (E40) 100W (E40) 140W
/ 150W (E40) /
Chorus 55 100W (E40) 100W (E40) 60W
150W (E40) 150W (E40) 90W
250W (E40) 250W (E40) 140W
Eco design
Chorus includes ferromagnetic and
electronic ballasts and dimming solutions
Chorus is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3 %
Complies with the European RoHS
directive
High recyclability rate
Material analysis
Chorus 45: Aluminium 77%, Steel 10%,
Plastic 7%, Others 6%
Chorus 55: Aluminium 78%, Steel 10%,
Plastic 7%, Others 5%
Weight - Windage (with max. control
gear)
Chorus 45: 9.3kg - 0.07m² - 150W
Chorus 55: 11.5kg - 0.09m² - 250W
453
207
556
251
CHORUS 45
CHORUS 55
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature extruded silicone pneumatic seal on bowl
Luminaire breathes through activated carbon Þ lter
Cable gland with anchoring device
Optional
Coloured light strip integrated in the optical unit
CH
OR
US
Lum
inaire
s
0%
10%
20%
50%
45,6%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Chorus - Multitec® 73 - MH 150W E40
- 90 ° 90 °
0 °500
0
- 45 ° 45 °
cd/klmC0 - C180C90 - C270Imax = 371 cd/klm
0%
10%
20%
50%
44,6%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Chorus - Multitec® 73 - HPS 150W E40
- 90 ° 90 °
0 °500
0
- 45 ° 45 °
cd/klmC0 - C180C90 - C270Imax = 315 cd/klm
Mechanical interfaces
LRL: Chorus lateral entry with plain swivel joint coupled with sleeve for
bracket end external ¯ 60mm
LR: Chorus lateral entry with swivel joint and ¯ ¾Ó thread
Top: Chorus Top or Bitop mounting for pole ¯ 60/62mm
Luminaire tilted to 10¡
LL: Chorus Lateral entry coupled with sleeve for bracket end external
¯ 60mm
SC: Chorus Suspended Catenary mounting,
CATELUX (cf. page 296)
Rotule crantée permettant l’inclinaison
du luminaire
Maintenance
- Opening and closing of the luminaire
Luminaire opens without tools by means
of 3 quarter turn wing screws
Bowl diffuser swivels on an aluminium
hinge
- Control gear maintenance
Direct access to the control gear by
hinging the reß ector
The control gear is mounted in luminaire
body on a removable tray
Electrical connection using quick
connectors
- Maintenance of the lamp
Direct access to the lamp after opening
the bowl diffuser by means of 3 quarter
turn wing screws
163
Photometric distributions _ Multiple lamp adjustment possibilities. Typical photometric data
Air expelled
when luminaire is
switched on
Air taken in
when luminaire is
switched off
METRO Luminaires
METROInformation for specifi ers
Luminaire available 3 homothetic sizes: Metro 45, Metro 55, Metro 65
IP65
IK07
Curved PMMA bowl
Flat glass or curved thermally toughened glass bowl IK08 (Metro 45 et 55)
Class I or II
Spun aluminium body
Injection die cast aluminium summit swivel joint
Reß ectors in polished, anodised aluminium, Multitec¨ 53, 73 and 83
Control gear integrated on a removable tray
Luminaire available in suspended or catenary versions
Luminaire opens without tools
Polyester powder coating, any RAL colour available
Sources
Model HPS MH MH PGZ12
Metro 45 / 35W (E27) /
50W (E27) 50W (E27) /
70W (E27) 70W (E27) /
100W (E40) 100W (E40) /
Metro 55 / / 45W
100W (E40) 100W (E40) 60W
150W (E40) 150W (E40) 90W
250W (E40) 250W (E40) 140W
Metro 65 150W (E40) 150W (E40) 140W
250W (E40) 250W (E40) /
400W (E40) 400W (E40) /
Eco design
Metro includes ferromagnetic and electronic
ballasts and dimming solutions
Metro is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3 %
Complies with the European RoHS directive
High recyclability rate
Material analysis
Metro 45 curved glass diffuser: Aluminium
58%, Glass 32%, Other 10%
Metro 55 curved glass diffuser: Aluminium
53%, Glass 39%, Other 8%
Metro 65: Aluminium 67%, Plastic 23 %,
Other 10%
Weight - Windage (with max. control
gear)
Metro 45: 8.5kg - 0.06m² - 100W
Metro 55: 12kg - 0.09m² - 250W
Metro 65: 19kg - 0.13m² - 400W
32
3
¯ 450
¯ 550
¯ 663
388
410
METRO 45
METRO 55
METRO 65
IP rating
Degree of protection IP65 according to standard EN 60529
High temperature extruded silicone pneumatic seal on bowl
ME
TR
O L
um
inaire
s
Photometric distributions Multiple lamp adjustment possibilities
Typical photometric data
Metro - Multitec® 73 - HPS 150W
0%
10%
20%
47,8%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 10°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270Imax = 368 cd/klm
Imax = 570 cd/klm
Metro - Multitec® 83 - MH 250W E40
0%
10%
20%
56,3%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 10°
- 90 ° 90 °
0 °- 45 ° 45 °640
0
cd/klm
C0 - C180C90 - C270
Mechanical interfaces
SRL: Metro Suspended with plain swivel joint
coupled with sleeve for bracket end external
¯ 60mm
SR: Metro Suspended with swivel joint and
¯ ¾Ó thread for female boss welded onto bracket
SC: Metro Suspended Catenary mounting
Maintenance
- Opening and closing of the luminaire
Luminaire opens without tools by means
of 3 quarter turn wing screws
Bowl diffuser swivels on an aluminium
hinge
- Control gear maintenance
Access to the control gear after removing
the reß ector by means of 4 quarter turn
screws
Control gear integrated on a removable
tray
- Maintenance of the lamp
Direct access to the lamp after opening
the bowl diffuser by means of 3 quarter
turn wing screws
165
CYTISE Luminaires
CYTISEInformation for specifi ers
Luminaire available in 2 sizes: Cytise PM and Cytise GM
IP66 (optical compartment)
IP44 (electrical compartment)
Flat glass and curved thermally toughened glass bowl IK08
Class I or II
Cast aluminium body
Reß ectors in polished, anodised aluminium, Eclapak¨ 27 and 34
Eclapak¨ sealed optical system
Control gear integrated on a removable tray
Luminaire opens without tools
Polyester powder coating, any RAL colour available
Sources
Model HPS MH MH PGZ12
Cytise PM / / 45W
70W (E27) 70W (E27) 60W
100W (E40) 100W (E40) 90W
150W (E40) 150W (E40) 140W
Cytise GM 150W (E40) 150W (E40) 90W
250W (E40) 250W (E40) 140W
400W (E40) 400W (E40) /
Eco design
Cytise includes ferromagnetic and electronic
ballasts and dimming solutions
Cytise is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3 %
Complies with the European RoHS directive
Recyclability rate of over 95%
Material analysis
Cytise PM: Aluminium 82%, Glass 11%,
Steel 4%, Other 3%
Cytise GM: Aluminium 82%, Glass 11%,
Steel 4%, Other 3%
Weight - Windage (with max. control
gear)
Cytise PM: 18kg - 0.094m² - 150W
Cytise GM: 23kg - 0.135m² - 400W
800
530
210
330
1000
700
245
430
CYTISE PM
CYTISE GM
IP rating
Degree of protection IP66 Eclapak¨ 27 (PM) and Eclapak¨ 34 (GM) sealed optical
units
Degree of protection IP44 control gear
Degrees of protection according to standard EN 60529
Luminaire breathes through activated carbon Þ lter
CY
TIS
E L
um
inaire
s
Imax = 508 cd/klm
Cytise - Eclapak® 27 - MH 150W E40
0%
10%
20%
51,2%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 10°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270 Imax = 736 cd/klm
Cytise - Eclapak® 34 - HPS 150W
0%
10%
20%
58%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 10°
- 90 ° 90 °
0 °- 45 ° 45 °480
0
cd/klm
C0 - C180C90 - C270
Mechanical interfaces
Lateral mounting on bracket ¯ 60mm
Maintenance
- Opening and closing of the luminaire
Luminaire opens without tools by means
of 2 quarter turn wing screws
- Control gear maintenance
Control gear integrated on a removable
tray
Access to the electrical control gear and
Eclapak¨ optical unit as soon as the
luminaire is opened
- Maintenance of the lamp
Lamp mounted on a quarter turn sealing
plug, can be removed without tools
Photometric distributions _ Multiple lamp adjustment possibilities. Typical photometric data
167
NANTUA Luminaires
Design : FORMA 6
NANTUAInformation for specifi ers
Luminaire available in 2 sizes: Nantua PM and Nantua GM
IP66 (optical compartment)
IP44 (electrical compartment)
Flat glass curved thermally toughened glass bowl IK08
Class I or II
Cast aluminium body
Reß ectors in polished, anodised aluminium, Eclapak¨ 27 and 34
Eclapak¨ sealed optical system
Control gear integrated on a removable tray
Luminaire opens without tools
Polyester powder coating, any RAL colour available
Eco design
Nantua includes ferromagnetic and elec-
tronic ballasts and dimming solutions
Nantua is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3 %
Complies with the European RoHS
directive
Recyclability rate of over 95%
Material analysis
Aluminium 72%, Glass 13%, Steel 11%,
Other 4%
Weight - Windage (with control gear)
Nantua PM: 16kg - 0.07m² - 150W
Nantua GM: 20kg - 0.09m² - 400W
Sources
Model HPS MH MH PGZ12
Nantua PM 70W (E27) 70W (E27) 45W
100W (E40) 100W (E40) 60W
150W (E40) 150W (E40) 90W
Nantua GM 150W (E40) 150W (E40) 90W
250W (E40) 250W (E40) 140W
400W (E40) 400W (E40) /
332
568
432
762
NANTUA GM
NANTUA PM
NA
NT
UA
Lum
inaire
s | D
esig
n : F
OR
MA
6
Nantua - Eclapak® 27 - HPS 150W
- 90 ° 90 °
0 °- 45 ° 45 °
Plan B = 30 °Plan ß = 0 °
600
0
I max = 592 cd/1000 Lms
0%
10%
20%
50%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 15°
Nantua - Eclapak® 34 - HPS 150W
0%
10%
20%
50%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 15°
- 90 °
0 °- 45 ° 45 °
Plan B = 25 °Plan ß = 0°
700
0
I max = 695 cd/1000 Lms
90 °
Mechanical interfaces
Nantua on U-bracket with lateral crank-pins
IP rating
Degree of protection IP66 Eclapak¨ 27 (PM) and Eclapak¨ 34 (GM) sealed optical
units
Degree of protection IP44 control gear
Degrees of protection according to standard EN 60529
Luminaire breathes through activated carbon Þ lter
Photometric distributions _ Multiple lamp adjustment possibilities. Typical photometric data
Maintenance
- Opening and closing of the luminaire
Luminaire opens without tools by means
of 2 quarter turn wing screws
- Control gear maintenance
Control gear integrated on a removable
tray
Access to the electrical control gear and
Eclapak¨ optical unit as soon as the
luminaire is opened
- Maintenance of the lamp
Lamp mounted on a quarter turn sealing
plug can be removed without tools
169
LUNA Luminaires
Design : J-M WILMOTTE
Information for specifi ers
IP65
Thermally toughened ß at glass IK08
Class I or II
Cast aluminium body
Version with reß ector: polished, anodised aluminium and silkscreen printed glass,
Multitec¨ 53
Version without reß ector: inner casting white painted and sanded glass
Control gear integrated on a removable tray
Polyester powder coated
Standard colour: white RAL 9002
Sources
Model HPS MH MH PGZ12
Luna / 35W (E27) /
/ 50W (E27) /
70W (E27) 70W (E27) 45W
100W (E40) 100W (E40) 90W
Photometric distributions _ Typical photometric data
l/h0%
10%
20%
50%
27,4%
70%
1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Luna - HPS 70W (sanded glass)
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
300
0
Imax = 281 cd/klm
Eco design
Luna is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3 %
Complies with the European RoHS directive
Recyclability rate of over 95%
Material analysis
Luna: Aluminium 79%, Glass 12%, Steel 7%,
Other 2%
Weight - Windage (with max. control gear)
Luna: 10kg - 0.07m² - 100W
IP rating
Degree of protection IP65 according to standard
EN 60529
Silicone pneumatic gasket
Mechanical interfaces
Cylindroconical steel pole ¯ 60/62mm
Fixed to pole by a collar clamp
Maintenance
Access to the lamp and the control gear by
opening the glass by means of 3 quarter turn
screws
LUNA
752
200
376
529
LUNA
Information for specifi ers
IP65
Truncated-cone shape thermoformed PMMA bowl IK07
Class I or II
Spun aluminium body
Reß ectors in polished, anodised aluminium, Multitec¨ 73 and 83
Control gear integrated on a removable tray
Assembly polyester powder coated
Standard colour: white RAL 9002
Sources
Model HPS MH MH PGZ12
Rochelongue 100W (E40) 100W (E40) 90W
150W (E40) 150W (E40) 140W
250W (E40) 250W (E40) /
Photometric distributions Multiple lamp adjustment possibilities . Typical photometric data
RO
CH
EL
ON
GU
E L
um
inaire
s | D
esig
n : J
-M W
ILM
OTTE
ROCHELONGUE
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
400
0
I max = 421 cd/klm
0%
10%
20%
50%48,5%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Rochelongue - CW 140W
Eco design
Rochelongue is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3 %
Complies with the European RoHS directive
High recyclability rate
Material analysis
Rochelongue: Aluminium 88%, Plastic 9%,
Steel 3%
Weight - Windage (with max. control
gear)
Rochelongue: 14kg - 0.17m² - 250W
IP rating
Degree of protection IP65 according to
standard EN 60529
Silicone pneumatic gasket
Mechanical interfaces
Cylindroconical steel pole
Bracket with aluminium tie-rod on clamp
Luminaire fastened onto the bracket by
decorative connector
Tie-rod fastened onto pole by a clamp
171
660
235
323
ROCHELONGUE
IDYLLE Luminaires
Information for specifi ers
1 size with 3 versions: Idylle Louver, Idylle Refractor, Idylle Domino
IP66
IK: 60 Joules
Class I or II
Polycarbonate or PMMA diffuser
Injected aluminium base
Spun aluminium cap
Integrated control gear
Luminaire supplied pre-wired
Optional: Translucent PMMA cap: blue, red, yellow or green (excluding
Domino version)
Polyester powder coated, any RAL colour available
Sources
Model HPS MH MH G12 MH PGZ12
Idylle Louver / 35W (E27) 35W /
50W (E27) 50W (E27) / 45W
70W (E27) 70W (E27) / 60W
100W (E40) 100W (E40) / 90W
Idylle Refractor / 35W (E27) 35W /
50W (E27) 50W (E27) / 45W
70W (E27) 70W (E27) / 60W
100W (E40) 100W (E40) / 90W
Idylle Domino / / 35W /
/ / 70W /
/ / 150W /
Eco design
Idylle includes ferromagnetic and electronic
ballasts and dimming solutions
Idylle is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 20%
Complies with the European RoHS
directive
High recyclability rate
Material analysis
Idylle Domino: Aluminium 48%, Plastic
30%, Glass 13%, Steel 7%, Other 2%
Idylle Louver: Aluminium 54%, Plastic
34%, Steel 7%, Other 5%
Idylle Refractor: Aluminium 48%, Plastic
46%, Others 5%, Steel 1%
Weight - Windage (without max.
control gear)
Idylle: 8.5kg - 0.15m² - 150W
IDYLLE
¯ 522
IDYLLE
628 336
182
¯ 60/62
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature moulded silicone gasket on base
Cable gland with anchoring device
IDY
LL
E L
um
inaire
s
Photometric distributions Typical photometric data
Idylle Domino - MH 70W G12
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
160
0
10.00m0.00
10.00m
0.00
Idylle Refracto - MH 100W E40
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
160
0
10.00m0.00
10.00m
0.00
Imax = 208 cd/klm
Idylle Louver - MH 100W E40
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
120
0
10.00m0.00
10.00m
0.00
Imax = 114 cd/klm
Mechanical interfaces
Post top mounted, fastened by 4 screws
Maintenance
- Opening and closing of the luminaire
Opening by removing the diffuser by
means of 4 safety screws located in the
base
- Maintenance of the lamp
Removal of the louver or refractor (quarter
turn system)
Domino version: removal of top aluminium
cap by 2 screws
- Control gear maintenance
Removal of control gear cover (quarter
turn system) for louver and refractor
Domino version: removal of assembly by
3 screws
173
ORIENT Luminaires
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
80
0
10.00m0.00
10.00m
0.00
I max = 54 cd/klm
Orient - MH 70W E27
Information for specifi ers
IP65
IK07
Opal PMMA diffuser, ¯ 170mm
Class I or II
Cast aluminium base and rings
Aluminium deß ector cap (underside painted in white color)
Frame made up of injected aluminium rings, ¯ 210mm
Control gear integrated on a removable tray
Polyester powder coated, any RAL colour available
Sources
Model HPS MH
Orient / 35W (E27)
50W (E27) 50W (E27)
70W (E27) 70W (E27)
100W (E40) 100W (E40)
Photometric distributions _ Typical photometric data
Eco design
Orient is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 20%
Complies with the European RoHS directive
High recyclability rate
Weight - Windage (with max. control
gear)
Orient: 10kg - 0.09m² - 100W
Mechanical interfaces
Post top mounted on steel pole ¯ 60mm
Suspended version, special mounting on
aluminium bracket ¯ 60mm
Maintenance
Access to the lamp by removing the cap
ORIENT
535
¯ 559
ORIENT
¯ 210
AU
RIS
Lum
inaire
s
AURIS
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
160
0
10.00m0.00
10.00m
0.00
I max = 153 cd/klm
Auris - MH 100W E40
175
Information for specifi ers
IP 55
IK10 (polycarbonate)
IK07 (PMMA)
Polycarbonate or clear PMMA diffuser, ¯ 150mm
Class II
Polycarbonate base
Aluminium cap
Polished aluminium deß ector
Integrated control gear
Cap: top part, anthracite grey RAL 7016, bottom part, white RAL 9016
Deß ector: aluminium coating RAL 9016
Sources
Model HPS MH
Auris 70W (E27) 70W (E27)
100W (E27) 100W (E27)
Photometric distributions _ Typical photometric data
Eco design
Auris is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 20%
Complies with the European RoHS directive
High recyclability rate
Weight - Windage (with max. control
gear)
Auris: 5.5kg - 0.13m² - 100W
Mechanical interfaces
Steel pole ¯ 60mm or 76mm
Maintenance
Access to the lamp and the control gear by
removing the globe, by quarter turning the
base
¯ 600
AURIS
580
GLORIA Luminaires
GLORIA
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
160
0
10.00m0.00
10.00m
0.00
Gloria - MH 100W E40
Information for specifi ers
IP65
IK10
Class I
Clear polycarbonate diffuser ¯ 200mm
Cast aluminium base
Reinforced steel deß ector cap, (underside painted in white color)
Louver-deß ector consisting of 5 painted steel disks, ¯ 170mm
Integrated control gear
Polyester powder coated, grey RAL 9006
Sources
Model HPS MH
Gloria 70W (E27) 70W (E27)
100W (E40) 100W (E40)
Photometric distributions Typical photometric data
Eco design
Gloria is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 20%
Complies with the European RoHS directive
Weight - Windage (with max. control
gear)
Gloria: 8.5kg - 0.13m² - 100W
Mechanical interfaces
Steel pole 76mm or ¯ 60mm (with adaptor
part)
Maintenance
Access to the lamp and the control gear by
removing the top cover and deß ector cap
¯ 205
¯ 598
GLORIA
569
GL
OR
IA L
um
inaire
s
177
CLIP EVOLUTION Luminaires
Design : M. AUREL
CLIP EVOLUTION
Information for specifi ers
Luminaire available in 2 homothetic sizes Clip 28 and Clip 34
IP66
Flat glass IK08 or curved thermally toughened glass bowl IK10
Curved PMMA bowl IK07
Curved polycarbonate bowl IK10
Class I or II
Injection die cast aluminium body
Reß ectors in polished, anodised aluminium: Optitec¨ 27, 34
Eclapak¨ version available (sealed optical unit)
Control gear integrated on a removable tray, disconnectable without tools
Fastening system enabling Top or lateral mounting
Luminaire opens without tools
Options: photoelectric cell, self-cleaning glass, motion sensor, front and rear
louver, camera
Polyester powder coating, any RAL colour available
Sources
Model HPS MH MH PGZ12
Clip 28 / 35W (E27) /
50W (E27) 50W (E27) 45W
70W (E27) 70W (E27) 60W
100W (E40) 100W (E40) 90W
150W (E40) 150W (E40) 140W
Clip 34 150W (E40) 150W (E40) 140W
250W (E40) 250W (E40) /
400W (E40) 400W (E40) /
Eco design
Clip includes ferromagnetic and electronic
ballasts and dimming solutions
Clip is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3%
Complies with the European RoHS
directive
Recyclability rate of over 95%
Material analysis
Clip 28 curved glass: Aluminium 76%,
Glass 10%, Steel 7%, Other 4%,
Plastic 3%
Clip 34 curved glass: Aluminium 77%,
Glass 12%, Steel 6%, Other 3%,
Plastic 2%
Weight - Windage (with max. control
gear)
Clip 28: 7.4kg - 0.05m² - 150W
Clip 34: 14.0kg - 0.07m² - 400W
219
650
CLIP 28 CLIP 34
341
800
243
380
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature extruded silicone pneumatic gasket on bowl
diffuser and lower casting
Luminaire breathes through activated carbon Þ lter
Protected Microswitch for safety
CL
IP E
VO
LUT
ION L
um
inaire
s | D
esig
n : M
. AU
RE
L
Photometric distributions _ Multiple lamp adjustment possibilities. Typical photometric data
Imax = 662 cd/klm
Clip 28 - Optitec® 27 - MH 100W E40
0%
10%
20%
50%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270
Imax = 528 cd/klm
Clip 34 - Optitec® 34 - HPS 250W
0%
10%
20%
55%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270
Mechanical interfaces
Options
- Photoelectric cell
- Self-cleaning glass
- Motion sensor
- front and rear louvers
- Camera
Luminaire lateral mounted on
bracket ¯ 42, 49 and 60mm
Luminaire post top mounted on
¯ 60 and 76mm
Luminaire adjustable from 0 to 15¡
in 5¡ steps
15 °
0 °
5 °
10 °
Maintenance
- Opening and closing of the luminaire
Ergonomic opening handle, easily
accessible at the front of the luminaire
Automatic disconnection when opening
the luminaire
Canopy held open by a locking safety stay
- Control gear maintenance
Control gear on removable tray,
disconnectable without tools, released by
simple hand pressure
A microswitch cuts off the power as soon
as the luminaire is opened
- Maintenance of the lamp
Direct access to the lamp and its
adjustments as soon as the canopy is
opened
Air expelled
when luminaire is
switched on
Air taken in
when luminaire is
switched off
Clip 28 - Optitec® 27 - CW 90W
0%
10%
20%
50,3%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270Imax = 672 cd/klm
Imax = 443 cd/klm
Clip 28 - Optitec® 27 - HPS 100W
0%
10%
20%
48,3%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
- 90 ° 90 °
0 °- 45 ° 45 °320
0
cd/klm
C0 - C180C90 - C270
179
MURENA Luminaires
MURENAInformation for specifi ers
IP66
IK09
Class I or II
Injection die cast aluminium body
Reß ectors in polished, anodised aluminium M60
Thermally toughened ß at glass
Control gear integrated on a removable tray, disconnectable without tools
Fastening system enabling Top or lateral mounting
Luminaire opens without tools
Optional: self-cleaning glass
Polyester powder coating, any RAL colour available
Sources
Model HPS MH MH PGZ12
Murena / 35W (E27) /
50W (E27) 50W (E27) 45W
70W (E27) 70W (E27) 60W
100W (E40) 100W (E40) 90W
150W (E40) 150W (E40) 140W
250W (E40) 250W (E40) /
400W (E40) / /
Eco design
Murena includes ferromagnetic and
electronic ballasts and dimming solutions
Murena is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3%
Complies with the European RoHS
directive
High recyclability rate
Material analysis
Murena: Aluminium 75%, Glass 10%,
Other 7%, Plastic 5%, Steel 3%
Weight - Windage (with max. control
gear)
Murena: 11.5kg - 0.075m² - 400W
676
MURENA
18
23
51
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature extruded silicone pneumatic gasket on lower casting
High temperature extruded silicone gasket on glass diffuser
Luminaire breathes through activated carbon Þ lter
Cable gland with anchoring device
MU
RE
NA
Lum
inaire
s
Photometric distributions _ Multiple lamp adjustment possibilities. Typical photometric data
Imax = 412 cd/klm
Murena - M60 - HPS 150W
0%
10%
20%
52,4%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270 Imax = 394 cd/klm
Murena - M60 - HPS 250W
0%
10%
20%
54,1%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270
Mechanical interfaces
Luminaire post top mounted on
pole ¯ 60mm
Tilts 0¡ and 10¡
Decorative trim for Murena
luminaire
cf. page 298
Reversible mounting sleeve to change from lateral mounted version to Top
mounted version (fastened by 2 screws)
Luminaire lateral mounted on
bracket ¯ 60mm
Tilts 0¡, 10¡ and 15¡
Maintenance
- Opening and closing of the luminaire
Luminaire opens without tools by means
of a press bar located on the top casting
of the luminaire
Luminaire held open by a safety stay
Power cuts off when luminaire is opened
- Control gear maintenance
Control gear integrated on a removable
tray, disconnectable without tools
Electrical connection using quick
connectors
- Maintenance of the lamp
Lamp mounted on a quarter turn sealing
plug which can be removed without tools
181
PALEO Luminaires
PALEOInformation for specifi ers
Luminaire available with 2 Þ nishes: Paleo 440 and Paleo 441
IP66
Flat glass or curved thermally toughened glass bowl IK10
Curved PMMA bowl IK07
Curved polycarbonate bowl IK10
Class I or II
Injection die cast aluminium body
Reß ectors in polished, anodised aluminium, Optitec¨ 34
Control gear integrated on a removable tray, disconnectable without tools
Power cuts off when luminaire is opened
Fastening system enabling Top or lateral mounting
Luminaire opens without tools
Polyester powder coating, any RAL colour available
Sources
Model HPS MH MH PGZ12
Paleo 70W (E27) 70W (E27) 45W
100W (E40) 100W (E40) 60W
150W (E40) 150W (E40) 90W
250W (E40) 250W (E40) 140W
400W (E40) 400W (E40) /
Eco design
Paleo includes ferromagnetic and
electronic ballasts and dimming solutions
PalŽo is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3%
Complies with the European RoHS
directive
High recyclability rate
Material analysis
Paleo 440: Aluminium 69%, Glass 18%,
Plastic 5%, Other 7%, Steel 1%
Paleo 441: Aluminium 73%, Glass 17%,
Plastic 2%, Other 7%, Steel 1%
Weight - Windage (with max. control
gear)
Paleo: 12.7kg - 0.07m² - 400W
754
240
333
PALEO
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature extruded silicone pneumatic gasket on lower
casting and bowl diffuser
Luminaire breathes through activated carbon Þ lter
Cable gland with anchoring device
PA
LE
O L
um
inaire
s
Photometric distributions Multiple lamp adjustment possibilities .
Typical photometric data
Paleo - Optitec® 34 - HPS 150W
0%
10%
20%
60,3%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270Imax = 514 cd/klm
Mechanical interfaces
15¡
0¡
5¡
10¡
Luminaire Post Top mounted on
pole ¯ 60/62mm
Tilts 0¡, 5¡, 10¡ and 15¡
Luminaire lateral mounted on
bracket ¯ 42, 49 and 60mm
Tilts 0¡, 5¡, 10¡ and 15¡
Maintenance
- Opening and closing of the luminaire
Luminaire opens without tools by pressing
on 2 hooks at the back of the luminaire
Luminaire held open by a safety stay
Power cuts off when luminaire is opened
- Control gear and lamp maintenance
Direct access to the control gear and the
lamp when opening the luminaire.
Compact module including the control
gear, the lamp holder and the lamp,
removable without tools
Paléo 440 / Paléo 441
PalŽo 440 PalŽo 441
bowl holder black polyamide reinforced with glass Þ bre painted injected aluminium
opening hooks black polyamide reinforced with glass Þ bre stainless steel
fastening sleeve black injected aluminium painted injected aluminium
183
ECLAT Luminaires
ECLATInformation for specifi ers
IP66
Thermally toughened ß at glass or thermally toughened pressed curved glass
diffusers, IK08
Curved PMMA bowl, IK07
Curved polycarbonate bowl, IK10
Class I or II
Injection die cast aluminium body
Reß ectors in polished, anodised aluminium, Optitec¨ 27
Control gear integrated on a removable tray, disconnectable without tools
Fastening system enabling Top or lateral mounting
Luminaire opens without tools
Disconnecting switch for class II, optional for class I
Accessory: external louver
Polyester powder coating, any RAL colour available
Sources
Model HPS MH MH PGZ12
Eclat / 35W (E27) /
50W (E27) 50W (E27) 45W
70W (E27) 70W (E27) 60W
100W (E40) 100W (E40) 90W
150W (E40) 150W (E40) 140W
250W (E40) 250W (E40) /
Eco design
Eclat includes ferromagnetic and electronic
ballasts and dimming solutions
Eclat is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3%
Complies with the European RoHS
directive
Recyclability rate of over 95%
Material analysis
Eclat curved glass: Aluminium 79%, Glass
11%, Steel 6%, Other 4%
Weight - Windage (with max. control
gear)
Eclat: 10.3kg - 0.08m² - 250W
34
6
584
ECLAT
20
8
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature extruded silicone pneumatic gasket on the
bowl and the lower casting
Luminaire breathes through activated carbon Þ lter
Cable gland with anchoring device
EC
LA
T L
um
inaire
s
Photometric distributions Multiple lamp adjustment possibilities
Typical photometric data
Eclat - Optitec® 27 - MH 100W E40
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270
50%
Imax = 662 cd/klm
Mechanical interfaces
20¡
5¡
Luminaire Post Top mounted on
pole ¯ 60/62mm by a pressure
screw
Penetration of 70mm onto the
pole
Luminaire tilts 5¡ and 20¡
Luminaire lateral mounted onto
brackets ¯ 42/49/60mm by 2
pressure screws
Bracket penetrates 90mm onto
the lantern
Maintenance
- Opening and closing of the luminaire
Luminaire opens without tools by means of
a quarter turn lock located on the canopy
at the back of the luminaire
Luminaire held open by a safety stay
Direct access to all the components when
opening the luminaire: electrical control
gear, optical unit, bowl, lamp
- Control gear maintenance
Control gear integrated on a removable
tray
Electrical connection using quick
connectors
- Maintenance of the lamp
Direct access to the lamp and its
adjustments when opening the canopy
185
OBLIC Luminaires
Design : J-M WILMOTTE
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
160
0
10.00m0.00
10.00m
0.00
I max = 123 cd/klm
Oblic - MH 70W G12
OBLICInformation for specifi ers
IP66
Thermally toughened ß at glass IK08
Class I or II
Cone and arm made of cast aluminium
Asymmetrical reß ector in polished, anodised aluminium
Reß ector wing made of composite material
Control gear integrated on a removable tray
Metal parts polyester powder coated, any RAL colour available
Sources
Model MH G12
Oblic 70W
100W
150W
Photometric distributions _ Typical photometric data
Eco design
Oblic is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 20%
Complies with the European RoHS directive
High recyclability rate
Material analysis
Oblic: Composite material 57%, Aluminium
38%, Steel 3%, Glass 2%
Weight - Windage (with max. control
gear)
Oblic: 18kg - 0.32m² - 150W
Mechanical interfaces
Special steel pole ¯ 90mm, with spigot
¯ 70 x 100mm
Luminaire post top mounted
IP rating
Degree of protection IP66 according to
standard EN 60529
Silicone pneumatic gasket
Maintenance
Access to the lamp and the control gear by
opening the glasss
1032
OBLIC
634
650
1050
352
YR
IA L
um
inaire
s
187
Yria - MH 150W G12
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
120
0
Imax = 98 cd/klm
10.00m0.00
10.00m
0.00
Information for specifi ers
IP66
Thermally toughened glass IK08
Class I or II
Stepped, grooved body and lens holder arms made of injected aluminium
Circular reß ector in polished, anodised aluminium
Top lens reß ector made of composite material
Control gear integrated on a removable tray
Metal parts polyester powder coated, any RAL colour available
Sources
Model MH G12
Yria 70W
100W
150W
Photometric distributions _ Typical photometric data
Eco design
Yria is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 20%
Complies with the European RoHS directive
High recyclability rate
Material analysis
Yria : Aluminium 77%, Composite material
18%, Steel 3%, Glass 2%
Weight - Windage
Yria: 15kg - 0.10m² - 150W
Mechanical interfaces
Post top mounted
Cylindroconical steel pole, ¯ 60/62mm
Maintenance
Access to the lamp and the control gear by
removing the glass, after quarter turning
YRIA
689
YRIA
250
120 ¡ ¿ 680
REFLEX Luminaires
Design : J-M WILMOTTE
10.00m0.00
10.00m
0.00
I max = 90 cd/klm
Reflex - MH 150W G12
- 90 ° 90 °
0 °100
0
- 45 ° 45 °
C0 - C180
C90 - C270
Information for specifi ers
IP66
Curved thermally toughened glass IK08
Class I or II
Bladed cone and arms made of injected aluminium
Circular reß ector in polished, anodised aluminium
Top lens reß ector made of composite material
Control gear in separate box housed in the bottom of the pole
Metal parts polyester powder coated, any RAL colour available
Sources
Model MH G12 MH PGZ12
Refl ex 70W 90W
100W 140W
150W /
Photometric distributions _ Typical photometric data
Eco design
Reß ex is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 20%
Complies with the European RoHS directive
High recyclability rate
Material analysis
Reß ex: Aluminium 56%, Composite material
39%, Steel 3%, Glass 2%
Weight - Windage (with max. control
gear)
Reß ex: 18kg - 0.12m² - 150W
Mechanical interfaces
SpeciÞ c steel pole ¯ 90mm, with spigot
¯ 70 x 100mm
Luminaire post top mounted
IP rating
Degree of protection IP66 according to
standard EN 60529
Maintenance
Access to the lamp is by tipping the glass
636
REFLEX
901
¯ 900
REFLEX
RE
FL
EX
GM
Lum
inaire
s | D
esig
n : J
-M W
ILM
OTTE
Reflex GM - MH 150W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
240
0
0%
10%
20%
50%
40%
33,2%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
REFLEX GM
¯ 1400
REFLEX GM
1465
Information for specifi ers
IP65
Circular PMMA diffuser
Class I or II
Bladed cone and arm made of cast aluminium
Upper reß ector in polished, anodised aluminium, Multitec¨ 73
Lower circular reß ector in polished, anodised aluminium
Upper lens reß ector made of composite material with integrated direct light unit
Control gear in separate box housed in the bottom of the pole
Metal parts polyester powder coated, any RAL colour available
Sources
Model Source Indirecte Source Directe
Refl ex GM MH 150W (G12) MH 150W (E40)
Photometric distributions Typical photometric data
Eco design
Reß ex is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 20%
Complies with the European RoHS directive
High recyclability rate
Material analysis
Reß ex GM: Aluminium 77%, Other 18%,
Steel 3%, Glass 2%
Weight - Windage (with max. control
gear)
Reß ex GM: 36kg - 0.37m² - 150W
Mechanical interfaces
Cylindroonical steel or aluminium pole
¯ 110mm with spigot ¯ 90 x 165mm
Luminaire post top mounted
IP rating
Degree of protection IP65 according to
standard
189
DUPLEX Luminaires
Design : J-M WILMOTTE
DUPLEX
I max = 482 cd/klm
0%
10%
20%
50%
39%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Duplex - MH 100W E40
- 90 ° 90 °
0 °250
0
- 45 ° 45 °
C0 - C180
C90 - C270
Information for specifi ers
IP66
Class I or II
Luminaire made of an aluminium plate, a spun aluminium dome and a diffuser wing
made of composite material
Flat thermally toughened glass
Polished, anodised aluminium reß ector, Optitec¨ 34
Control gears integrated on a removable trays
Luminaire allowing direct and indirect lighting (LEDs)
Polyester powder coated Standard colour: Eclatec grey
Sources Model HPS MH LEDs
Duplex direct 100W (E40) 100W (E40) /
150W (E40) 150W (E40) /
250W (E40) 250W (E40) /
Duplex wing / 70W 8W (LEDs)
Photometric distributions Multiple lamp adjustment possibilities . Typical photometric data
Eco design
Reß ex is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3%
Complies with the European RoHS directive
High recyclability rate
Weight - Windage (with max. control
gear)
Duplex: 44kg - 0.36m² - 250W
IP rating
Degree of protection IP66 according to
standard EN 60529
Mechanical interfaces
SpeciÞ c cylindroconical steel pole
interior ¯ 112mm
Luminaire mounted on the bracket by a
decorative connection
Male mounting bracket for pole top Þ tting
729
1000
DUPLEX
CL
IMA
T L
um
inaire
s
¯ 550 ¯ 650 ¯ 750
CLIMAT 55 CLIMAT 65 CLIMAT 75
CLIMAT
Climat - HPS 150W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
400
0
I max = 382 cd/klm
0%
10%
20%
40,4%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Information for specifi ers
3 sizes of luminaire: Climat 55, Climat 65, Climat 75
IP65
Flat thermally toughened glass IK08
Class I or II (up to 150W)
Conical shaped aluminium body
Polished, anodised aluminium reß ectors,
Multitec¨ 53, 73 and 83 (according to the model)
Control gear integrated on removable tray
Luminaire opens without tools
Polyester powder coated, any RAL colour available
Sources Model MH HPS
Climat 55 70W (E27) 70W (E27)
Climat 65 100W (E40) 100W (E40)
150W (E40) 150W (E40)
Climat 75 150W (E40) 150W (E40)
250W (E40) 250W (E40)
Photometric distributions Multiple lamp adjustment possibilities . Typical photometric data
Eco design
Climat is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR = 0
Complies with the European RoHS directive
High recyclability rate
Material analysis
Climat 55
Aluminium 65%, Plastic 23%, Other 12%
Climat 65
Aluminium 67%, Plastic 23%, Other 10%
Climat 75
Aluminium 66%, Plastic 24%, Other 10%
Weight - Windage (with max. control
gear)
Climat 55: 12kg - 0.06m² - 70W
Climat 65: 16kg - 0.08m² - 150W
Climat 75: 22kg - 0.11m² - 250W
Mechanical interfaces
Cylindroconical steel Pole ¯ 60/62mm
Luminaire lateral mounted on the bracket
191
BTX Luminaires
BTX
BTX - HPS 150W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
400
0
I max = 327 cd/klm
0%
10%
20%
43,8%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Information for specifi ers
Luminaire available in 3 sizes: BTX 153, BTX 173, BTX 183
Twin reß ector version available: BTX 273, BTX 283
IP65
IK08
Class I or II
Thermally toughened ß at glass
Aluminium body
Reß ectors in polished, anodised aluminium,
Multitec¨ 53, 73 and 83 (according to the version)
Version available with sealed optical unit, Eclapak¨ Optitec¨ 27
Control gear integrated on a removable tray
Luminaire opens without tools
Luminaire available in Top and Bi-Top versions (pole ¯ 60/62mm),
U-bracket and lateral mounted (bracket ¯ 60mm)
Polyester powder coating, any RAL colour available
Photometric distributions Multiple lamp adjustment possibilities . Typical photometric data
Sources
Model HPS MH MH PGZ12
BTX 153 70W (E27) 70W (E27) /
BTX 173 100W (E40) 100W (E40) 60W
150W (E40) 150W (E40) 90W
250W (E40) 250W (E40) 140W
BTX 183 150W (E40) 150W (E40) 140W
250W (E40) 250W (E40) /
400W (E40) 400W (E40) /
Eco design
BTX includes ferromagnetic and electronic
ballasts and dimming solutions
BTX is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 0 %
Complies with the European RoHS directive
Recyclability rate of over 95%
Material analysis
BTX 153 U-bracket: Aluminium 49%, Steel
38%, Glass 12%, Other 1%
BTX 173 U-bracket: Aluminium 48%, Steel
34%, Glass 16%, Other 2%
BTX 183 U-bracket: Aluminium 48%, Steel
31%, Glass 19%, Other 2%
Weight - Windage (with max. control
gear)
BTX 153: 12kg - 0.11m² - 70W
BTX 173: 14kg - 0.13m² - 250W
BTX 183: 16kg - 0.15m² - 400W
BTX 273: 21kg - 0.13m² - 250W
BTX 283: 29kg - 0.15m² - 250W
FO
B
A
173
FO
mm A B
BTX 153BTX 173BTX 273BTX 183BTX 283
432556556656656
267346556406656
BTX
QU
AD
RIL
UX
Lum
inaire
s
QUADRILUX
692
QUADRILUX
85
692
85
527
Information for specifi ers
IP65
IK08
Class I or II
Thermally toughened ß at glass
Body made of:
- a cast aluminium bearing structure
- a sheet aluminium cover
Reß ectors in polished, anodised aluminium: Road, Circular, Asymmetrical
Control gear integrated on removable tray, disconnectable, or separate in a box
housed in the bottom of the pole
Opens without tools
Polyester powder coating, any RAL colour available
Photometric distributions Multiple lamp adjustment possibilities . Typical photometric data
Weight - Windage (without control gear)
Quadrilux: 38 kg - 0,36m²
Sources
Modèle HPS MH
Quadrilux
Circular
250W 250W
400W 400W
600W 1000W
1000W /
Quadrilux Road 250W 250W
400W 400W
600W /
Quadrilux
Asymmetrical
250W 250W
400W 400W
600W 1000W
1000W /
Eco design
Quadrilux is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR =0
Complies with the European RoHS directive
Recyclability rate of over 95%
Material analysis
Quadrilux: Aluminium 72%, Glass 15%,
Steel 10%, Other 3%
Maintenance
Opens by means of 3 quarter turn wing
screws
IP rating
Degree of protection IP65 according to
standard EN 60529. Extruded silicone
gasket
I max = 286 cd/klm
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
400
0
20.00m0.00
20.00m
0.00
Quadrilux - HPS 250W - Circular
193
ORASTAR Luminaires
ORASTAR
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
400
0
I max = 380 cd/klm
0%
10%
20%
50%
45,4%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Orastar - HPS 150W
Information for specifi ers
IP66
IK07
Class I or II
Injected aluminium frame
Spun aluminium dome
Curved clear PMMA bowl
Reß ectors in polished, anodised aluminium, Multitec¨ 73 and 83
Control gear integrated on a removable tray
Luminaire opens without tools
Luminaire available in Top, lateral, Suspended mountings
Polyester powder coating
Photometric distributions Multiple lamp adjustment possibilities . Typical photometric data
Sources
Model HPS MH
Orastar 70W (E27) 70W (E27)
100W (E40) 100W (E40)
150W (E40) 150W (E40)
250W (E40) 250W (E40)
Eco design
Orastar is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3%
Complies with the European RoHS directive
Weight - Windage (with max. control
gear)
Orastar: 10kg - 0,13m² - 250W
Mechanical interfaces
SR: Suspended with swivel joint,
¯ 3/4Ó thread
SM: Suspended Nipple, ¯ ¾Ó thread
(optional 1Ó thread)
LR: Lateral mounted with swivel joint,
¯ ¾Ó thread
LL: Side entry coupled with sleeve
TOP: Mounted vertically on pole
¯ 60/62mm, 5¡
SC: Suspended Catenary
LD: Lateral fork mounting, adjustment
0¡ to 20¡
40
3
¯ 550
ORASTAR
FO
RV
IL L
um
inaire
s
FORVIL
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
400
0
I max = 354 cd/klm
0%
10%
20%
50%
46,5%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Forvil - HPS 150W
Information for specifi ers
IP66
IK07
Class I or II
Injected aluminium frame
Spun aluminium dome
Clear or opal PMMA bowl
Polished, anodised aluminium reß ector, Multitec¨ 73
Control gear integrated on a removable tray
Luminaire available in Top, lateral mounted, Suspended
Polyester powder coating, any RAL colour available
Photometric distributions Multiple lamp adjustment possibilities . Typical photometric data
Sources
Model HPS MH
Forvil 70W (E27) 70W (E27)
100W (E40) 100W (E40)
150W (E40) 150W (E40)
Eco design
Forvil is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 3%
Complies with the European RoHS directive
Weight - Windage (with max. control
gear)
Forvil: 9kg - 0.08m² - 150W
Mechanical interfaces
SR: Suspended with swivel joint,
¯ 3/4Ó thread
SM: Suspended Nipple,
¯ ¾Ó thread (optional 1Ó thread)
LR: Lateral mounted with swivel joint,
¯ ¾Ó thread
LL: Side entry coupled with sleeve
TOP: Mounted vertically on pole
¯ 60/62mm, 5¡
SC: Suspended Catenary
27
5
¯ 550
FORVIL
195
197
LED Luminaires
Image RangeLumière RangeLuminairesLED LuminairesColumns and bollards
Wooden range Floodlights and built-in lightingStandalone lighting SpecialitiesTechnical annex
199
LED Luminaires
Contents
LED lighting // p. 200
Aloa // p. 202
Pixel S // p. 204
Pixel R // p. 206
Tsana // p. 208
Elyxe // p. 210
Elipt // p. 212
Indice // p. 214
Chorus // p. 216
Metro // p. 218
Reß ex // p. 220
Idylle // p. 222
Mamba // p. 224
Upgradeability
The intrinsic performance of LEDs
is progressing rapidly, which is why
the design of ECLATECÕs solutions
concentrates on upgradeability.
For many existing ECLATEC products, it
will therefore be possible to:
- replace, when justiÞ ed, the
conventional sources and control gear in
luminaires already installed, with an LED
light source.
- replace, in the future, existing LED
lights with new generations, as and
when LED performance develops.
Modularity
The variety of ECLATEC luminaires and
their different options justiÞ es the use
of solutions common to the different
models in the range. Moreover, this has
been the logic of our approach for years
(ORATEC, ORALUM frames, etc É).
Also the operating life of LEDs requires
fewer maintenance visits, the likelihood
of some replacement of LEDs is
inevitable, given the number of LEDs in
each lighting unit.
For these two reasons, ECLATEC has
therefore deliberately designed modular
solutions for both the LEDs and the
drivers.
The ORALEDS module, common to the
Tsana, Elipt, Metro, Chorus, Indice, Elyxe
and Reß ex (direct version) luminaires,
meets this objective.
Optical performance
The ß ux emanating from a LED retains a
spherical distribution; this is particularily
suited to certain applications.
Lighting a street, on the other hand,
requires an asymmetrical distribution.
To this effect, ECLATEC has developed
its own reß ector solution (ORALENS),
which meets the extensive lighting
criteria required by such situations.
LED lightingSince 2005, ECLATEC has offered LED lighting solutions.
Recent progress in LED performances has led ECLATEC to invest considerably in a highly efÞ cient line of products.This ECLATEC development is based on several guiding notions:
ORALEDS
ORALENS
201
Right lighting, lighting well
«Right lighting» remains a constant, including for
LED solutions.
In each context, ECLATEC selects the best
compromise between the number of LEDs, utilised
fl ux, power supply, cooling and depreciation.
The combination of ORALENS refl ectors, optimised
calibration parameters and control methods together
allows us to achieve remarkable levels of effi ciency
(expressed in lumens per watt), in an environmentally
friendly way, without sacrifi cing colour temperature.
«Lighting well» means limiting the systematic use of
lighting that is too cold - cold lighting, although most
effi cient, can generate dazzle and visual discomfort.
Quality of components
ECLATEC solutions use the very best components
(LEDs, power unit, electronic components), with the
dual aim of optimising performance and prolonging
operating life.
Particular care is taken in manufacturing the
products, with strict assembly and control
procedures for every part.
Multifunctionality
ORADRIVE drivers are designed to be combined with
various control devices.
This predisposition favours the upgradeability of
solutions and is more economical.
The offer
Finally, ECLATEC offers a wide palette of solutions,
ranging from background lighting (bollards and
columns) to the lighting of city centres or roads.
A total of some fi fteen luminaires provide a choice of
styles and applications.
ALOA LED Luminaires
Design : J-M WILMOTTE
Applications
Urban roads, pedestrian walkways, cycle paths, squares,
parks and pavements
Recommended heights:
from 4 to 5m - single bracket
from 4 to 6m - double bracket
Information for specifi ers
IP66
IK08
Class I or II
Injection die cast aluminium body
ORALENS integrated injected PMMA lenses
Luminaire pre-wired
Top or Bi-top mountings
Polyester powder coating, any RAL colour available
Optional: motion sensor with dimmable option and timer
Sources
42 LEDs units
Each LED has an individual ORALENS lens for asymmetrical
lighting distribution
Colour temperature: 4300K (neutral white)
Total power consumption with 350 mA power supply: 57W
ALOA
Eco design
Complies with the European RoHS directive
Eligible for the Energy Effi ciency Certifi cate
High recyclability rate
Material analysis
Aloa: Aluminium 84%, Other 7%, Steel 6%, Plastic 3%
Weight - Windage
Aloa: 8.1kg - 0.05m²
1258
ALOA
364
1288
208
320
Ø 60Ø 53
Ø 42
2510
364
225
320
80
Ø 60Ø 53
Ø 42
IP rating
Degree of protection IP66 according to standard EN 60529
Extruded silicone gasket
IP66 cable grommet for wiring
Luminaire breathes through activated carbon fi lter
AL
OA
LE
D L
um
inaire
s | D
esig
n : J
-M W
ILM
OTTE
Distribution photométrique
Imax = 518 cd/klm
Aloa - 42 LEDs
- 90 ° 90 °
0 °400
0
- 45 ° 45 °
cd/klmC0 - C180C90 - C270
0%
10%
20%
30%
40%
55,8%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 1°
Mechanical interfaces
Optional
Top or Bitop
Steel pole Ø 60/62mm
203
Maintenance
- Opening and closing
Opening by 7 quick-picth screws
- Control gear maintenance
Direct access to the power unit and
controller card
- Maintenance of the sources
Direct access to interchangeable LED
modules on site without tools
Quick connections
Motion sensor with dimmable option
and timer
PIXEL S LED Luminaires
Design : cabinet STOA
Pixel S provides symmetrical lighting and is particularly suited to cycle paths, lanes, parks and gardens.Combined with Pixel GM, Pixel S is also ideal for pathway lighting.
Pixel S contains a 24 or 48-LED module equipped with an integrated refl ector for extensive illumination.
Pixel has a screen printed fl at glass. This design ensures both an aesthetically pleasing line and visually comfortable lighting.
PIXEL S BY ECLATEC
Applications
Pavements (roadlight or pathway light)
Cycle paths
Paths through parks or car parks
Recommended heights:
from 4 to 5m - single bracket
from 4 to 6m - double bracket
Information for specifi ers
IP66
IK09
Class I or II
Injection die cast aluminium body
Integrated lenses made in injected PMMA
Tray of 24 or 48 LEDs
Luminaire pre-wired
Top, Bitop or lateral mounting
Screen printed, thermally toughened fl at glass
Polyester powder coating, any RAL colour available
Sources
Pixel S 24:
24 LEDs with a total power consumption of 33W
Pixel S 48:
48 LEDs with a total power consumption of 60W
Colour temperature: 4300K (neutral white)
Power supply 350mA
Eco design
Complies with the European RoHS
directive
Eligible for the Energy Effi ciency Certifi cate
ULOR < 3%
Recyclability rate of over 95%
Material analysis
Pixel S: Aluminium 67%, Glass 18%, Steel
11%, Other 4%
Weight - Windage
Pixel S: 6.6kg - 0.06m²
500
75
420
29725
PIXEL S
PIX
EL
S L
ED
Lum
inaire
s | D
esig
n : C
ab
inet S
TO
A
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
640
0
cd/klm
Pixel S - 24/48 LEDs
0%
10%
20%
39,6%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 2°
Imax = 494 cd/klm
205
Distribution photométrique
Mechanical interfaces
Maintenance
- Opening and closing
Open by pressing on the button on the
canopy
Cover held in place by mechanical locking
system
- Control gear maintenance
Direct access to the power unit and
controller card
- Maintenance of the sources
Immediate access to the LED tray after
removing 6 fastening screws
Top and Bitop
For poles Ø 60 and 76mm
Luminaire tilted 2°, 5° and 10°
L: Side entry coupled with sleeve for tube
Ø 60mm
LAR: Side entry coupled with sleeve for
rectangular tube 50 x 70mm
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature pneumatic extruded silicone gasket on canopy
High temperature extruded silicone gasket on diffuser
Luminaire breathes through activated carbon fi lter
IP67 cable grommet
PIXEL R LED Luminaires
Design : Cabinet STOA
Pixel R is specially designed for lighting wide roadways at heights of 4 to 6 m.
Pixel R is available in 2 ver-sions: Pixel R 24 and Pixel R 46.Each LED is equipped with a specifi c injection-moulded ORALENS refl ector.The refl ectors are pre-tilted to 7° to allow the illumination of wide roadways.
PIXEL R BY ECLATEC Applications
Wide roadways
Cycle paths
Recommended heights:
from 4 to 5m - single bracket
from 4 to 6m - double bracket
Information for specifi ers
IP66
IK08
Class I or II
Injection die cast aluminium body
Individual injected PMMA ORALENS lenses
4 or 9 LED modules
Luminaire pre-wired
Injected aluminium LED module holder plate
Top, Bitop or lateral mounting
Optional: motion sensor with dimmable option and timer
Polyester powder coating, any RAL colour available
Sources
Pixel R 24: 24 LEDs with a total power consumption of 33W
Pixel R 46: 46 LEDs with a total power consumption of 64W
LED colour temperature: 4300K (neutral white)
Power supply 350mA
Eco design
Meets the European RoHS Directive
Eligible for the Energy Effi ciency Certifi cate,
with ULOR < 3%
High recyclability rate
Material analysis
Pixel R 24: Aluminium 83%, Steel 9%,
Plastic 2%, Other 6%
Pixel R 46: Aluminium 81%, Steel 9%,
Plastic 2%, Others 8%
Weight - Windage
Pixel R 24: 7.9kg - 0.06m²
Pixel R 46: 8.2kg - 0.06m²
500
75
420
29725
PIXEL R
PIX
EL
R L
ED
Lum
inaire
s | D
esig
n : C
ab
inet S
TO
A
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
400
0
cd/klm
Pixel R - 24/46 LEDs
0%
10%
20%
54,3%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 2°
I max = 427 cd/klm
207
Distribution photométrique
Maintenance
- Opening and closing
Open by pressing on the canopy
Cover held open by a mechanical locking
system
- Control gear maintenance
Direct access to the power unit and
controller card
Module can be changed on site without
tools
- Maintenance of the sources
Direct access to the LED module
Quick connectors
Interchangeable on site
Mechanical interfaces
Top and Bitop:
For poles Ø 60 and 76mm
Luminaire tilted 2°, 5° and 10°
L: Side entry coupled with sleeve for tube
Ø 60mm
LAR: Side entry coupled with sleeve for
rectangular tube 50 x 70mm
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature pneumatic extruded silicone gasket on canopy
High temperature extruded silicone gasket on diffuser
Luminaire breathes through activated carbon fi lter
IP67 cable grommet
TSANA LED Luminaires
TSANAApplications
Main roads, secondary urban and inter-urban roads
Cycle paths, pedestrian walkways, residential areas
Recommended heights:
Tsana 45: 4 to 6m
Tsana 55: 4 to 8m
Information for specifi ers
Luminaire available in 2 sizes: Tsana 45 and Tsana 55
IP66
IK08
Class I or II
Body and frame in injected aluminium
Spun aluminium dome
Luminaire available with Top and Lateral mounting
Polyester powder coating, any RAL colour available
ORALEDS Module
Standardised module including:
- injected aluminium optical plate, each LED with an individual ORALENS lens for
asymmetrical lighting distribution. Two tilt angles available according to type of mounting:
pre-tilted to 7° (R7), or tilt 0° (R0)
Plate available in two colours: sand grey 150 and sand grey 900
- Injected aluminium heat cooler
- power unit, ORADRIVE multifunctional driver, dimmer and power connection
Road type distribution (highly extensive)
Colour temperature 4300K (neutral white)
ORADRIVE driver with integrated thermal protection
Optional functionalities:
- motion sensor (ORALEDS 46) with
dimmable option and timer
- control options (astronomical clock,
telemanagement)
Sources
Tsana 45 takes the ORALEDS 46 module
(46 LEDs) in version R0 or R7
Total power consumption with 350mA
power supply: 64W
Tsana 55 takes the ORALEDS 66 module
(66 LEDs) in version R0 or R7
Total power consumption with 350mA
power supply: 88W
Eco design
Complies with the European RoHS
directive
Eligible for the Energy Effi ciency Certifi cate
with ULOR < 3%
High recyclability rate
Material analysis
Tsana 45: Aluminium 84%, Others 9%,
Steel 4%, Plastic 3%
Tsana 55: Aluminium 86%, Others 7%,
Steel 4%, Plastic 3%
Weight - Windage
Tsana 45: 9.9kg - 0.07m²
Tsana 55: 13.7kg - 0.09m²
TSANA 55 ORALEDS
TSANA 45 ORALEDS
Ø 555
11
5
Ø 455
11
5
TS
AN
A L
ED
Lum
inaire
s
- 90 ° 90 °
- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Tsana 45/55 - ORALEDS R0 - 46/66 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Imax = 640 cd/klm
400 0 °
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
400
0
cd/klm
Tsana 45/55 - ORALEDS R7 - 46/66 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Imax = 567 cd/klm
209
Photometric distributions
Mechanical interfaces
LRL: Tsana side entry with plain swivel joint coupled with
sleeve for bracket end with external Ø 60mm
LR: Tsana side entry with swivel joint and Ø ¾” thread for
female boss welded onto pole or bracket
LL: Tsana side entry coupled with sleeve for bracket end
with external Ø 60mm
Top: Tsana Top or Bitop fi tting for pole Ø 60/62mm
Luminaire tilted to 10°
Tsana on cast aluminium fastening plate
Tsara on cast aluminium
wall bracket
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature extruded pneumatic silicone gasket
Anchored cable gland
Luminaire breathes through activated carbon fi lter
Maintenance
- Opening and closing
Opening of luminaire by 3 quarter turn
screws
LED plate swivels on an aluminium hinge
- ORALEDS maintenance
Direct access to the ORALEDS module
Quick connectors for power unit
ORALEDS module interchangeable on site
Optional: special cast alumi-
nium adaptor part for tube
Ø 60mm
ELYXE LED Luminaires
Design : L. DAVY
ELYXEApplications
Urban roads, pedestrian walkways, cycle paths, squares, parks and pavements
Recommended height: 4 to 5m
Information for specifi ers
IP66
IK08
Class I or II
Injection die cast aluminium body
Extruded aluminium arms
Control gear in the upper luminaire body
Luminaires pre-wired
Luminaire available in top mounted or suspended versions
Polyester powder coating, any RAL colour available
ORALEDS Module
Standardised module including:
- injected aluminium optical plate, each LED with an individual ORALENS lens for asym-
metrical lighting distribution. Two tilt angles available according to type of mounting:
pre-tilted to 7° (R7), or tilt 0° (R0)
Plate available in two colours: sand grey 150 and sand grey 900
- Injected aluminium heat cooler
- power unit, ORADRIVE multifunctional driver, dimmer and power connection
Road type distribution (highly extensive)
Colour temperature 4300K (neutral white)
ORADRIVE driver with integrated thermal protection
Optional functionalities:
- motion sensor with dimmable option and
timer
- control options (astronomical clock,
telemanagement)
Sources
Elyxe 45 takes the ORALEDS 46 module
(46 LEDs) in versions R7, R0 and S
Total power consumption with 350mA
power supply: 64W
Eco design
Complies with the European RoHS
directive
Eligible for the Energy Effi ciency Certifi cate
with ULOR < 3%
High recyclability rate
Material analysis
Elyxe: Aluminium 89%, Others 5%, Steel
4%, Plastic 2%
Weight - Windage
Elyxe: 15.8kg - 0.08m²
680
720
670
Ø 680
ELYXE ELYXE SUSPENDED
ELY
XE
LE
D L
um
inaire
s | D
esig
n : L
. DA
VY
- 90 ° 90 °
- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Elyxe - ORALEDS R0 - 46 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Imax = 640 cd/klm
400 0 °
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Elyxe - ORALEDS S - 46 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Imax = 405 cd/klm
400
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
400
0
cd/klm
Elyxe - ORALEDS R7 - 46 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Imax = 567 cd/klm
211
Photometric distributions Typical photometric data
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature pneumatic extruded silicone gasket on top casting
Cable gland with anchoring device
Luminaire breathes through activated carbon fi lter
Mechanical interfaces
Mounting on standard pole Ø 60/62mm or specifi c pole Ø 76mm with
spigot Ø 60mm x 85mm or suspended wall mounting bracket with inte-
grated connection box
Maintenance
- Opening and closing
Opening of luminaire by opening an invisible locking device
Upper body held open by a safety stay
- ORALEDS maintenance
Direct access to the ORALEDS module
Quick connectors for power unit
ORALEDS module interchangeable on site
ELIPT LED Luminaires
Design : J-M WILMOTTE
In the LED version, ELIPT is available in 2 homothetic sizes: Elipt 45 and Elipt 55
These LED luminaires use mainly the same components as the Elipt models with dis-charge lamps.
The combinations of brackets and arms are the same as for the versions with traditional lamps in order to allow aesthe-tic continuity with items already in place.
The lighting is provided by ORALEDS module. The re-fl ectors and control gear are interchangeable with existing items.
ELIPTApplications
Main roads and secondary urban and distributor roads
Cycle paths, pedestrian walkways, residential areas
Recommended heights:
Elipt 45: 4 to 6m
Elipt 55: 6 to 8m
Information for specifi ers
Luminaire available in 2 sizes: Elipt 45 and Elipt 55
IP66
IK08
Class I and II
Spun aluminium dome
Injected aluminium body and frame
Luminaire available with Top, Side entry and Suspended mountings
Polyester powder coating, any RAL colour available
ORALEDS Module
Standardised module including:
- injected aluminium optical plate, each LED with an individual ORALENS lens for
asymmetrical lighting distribution. Two tilt angles available according to type of mounting:
pre-tilted to 7° (R7), or tilt 0° (R0)
Plate available in two colours: sand grey 150 and sand grey 900
- Injected aluminium heat cooler
- power unit, ORADRIVE multifunctional driver, dimmer and power connection
Road type distribution (highly extensive)
Colour temperature 4300K (neutral white)
ORADRIVE driver with integrated thermal protection
Optional functionalities:
- motion sensor (ORALEDS 46) with
dimmable option and timer
- control options (astronomical clock,
telemanagement)
Sources
ELIPT 45 takes the ORALEDS 46 module
(46 LEDs) in version R0 or R7
Total power consumption with 350mA
power supply: 64W
ELIPT 55 takes the ORALEDS 66 module
(66 LEDs) in version R0 or R7
Total power consumption with 350mA
power supply: 88W
Eco design
Complies with the European RoHS
directive
Eligible for the Energy Effi ciency Certifi cate
with ULOR < 3%
High recyclability rate
Material analysis (with power unit)
Elipt 45: Aluminium 84%, Others 9%, Steel
4%, Plastic 3%
Elipt 55: Aluminium 86%, Others 7%, Steel
4%, Plastic 3%
Weight - Windage
Elipt 45: 9.9kg - 0.07m²
Elipt 55: 13.7kg - 0.09m²
Ø 455
175
ELIPT 45 ORALEDS
ELIPT 55 ORALEDS
Ø 555
215
EL
IPT
LE
D L
um
inaire
s | D
esig
n : J
-M W
ILM
OTTE
- 90 ° 90 °
- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Elipt 45/55 - ORALEDS R0 - 46/66 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Imax = 640 cd/klm
400 0 °
213
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature extruded pneumatic silicone gasket
Cable gland with anchoring device
Luminaire breathes through activated carbon fi lter
Photometric distributions _ Typical photometric data
Mechanical interfaces
Maintenance
- Opening and closing
Opening of luminaire by 3 quarter turn
screws
LED plate swivels on an aluminium hinge
- ORALEDS maintenance
Direct access to the ORALEDS module
Quick connectors for power unit
ORALEDS module interchangeable on site
LRL: Elipt side entry with plain swivel joint coupled with
sleeve for bracket end with external Ø 60mm
LR: Elipt side entry with swivel joint and Ø ¾” thread for
female boss welded onto pole or bracket
Top: Elipt Top or Bitop fi tting for pole Ø 60/62mm
Luminaire tilted to 10°
LL: Elipt side entry coupled with sleeve for bracket end
with external Ø 60mm
Elipt on cast aluminium fastening plate
Elipt on cast aluminium
wall bracket
SR: Elipt suspended
with swivel joint
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
400
0
cd/klm
Elipt 45/55 - ORALEDS R7 - 46/66 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Imax = 567 cd/klm
CATELUX
cf. page 296
SCO: Elipt on catenary mounting
INDICE LED Luminaires
INDICEIn the LED version, INDICE is available in 2 sizes: Indice 500 and Indice 620 55
These LED luminaires use mainly the same components as the INDICE models with discharge lamps.
The combinations of brackets and arms are the same as for the versions with traditional lamps in order to allow aesthetic continuity with items already in place.
The lighting is provided by ORALEDS module. The refl ectors and control gear are interchangeable with existing items.
Applications
Main roads and secondary urban and inter-urban roads
Cycle Paths, pedestrian walkways, residential areas
Recommended heights:
Indice 500: 4 to 6m
Indice 620: 6 to 8m
Information for specifi ers
Luminaire available in 2 sizes: Indice 500 and Indice 620
IP66
IK08
Class I or II
Body and frame in injected aluminium
Luminaire pre-wired
Choice of aluminium domes: Graphic, Spiral, Volute and Parabol
Opening without tools
Polyester powder coating, any RAL colour available
ORALEDS Module
Standardised module including:
- injected aluminium optical plate, each LED with an individual ORALENS lens for asym-
metrical lighting distribution. Two tilt angles available according to type of mounting:
pre-tilted to 7° (R7), or tilt 0° (R0)
Plate available in two colours: sand grey 150 and sand grey 900
- Injected aluminium heat cooler
- power unit, ORADRIVE multifunctional driver, dimmer and power connection
Road type distribution (highly extensive)
Colour temperature 4300K (neutral white)
ORADRIVE driver with integrated thermal protection
Optional functionalities:
- motion sensor (ORALEDS 46) with dimmable
option and timer
- control options (astronomical clock, telema-
nagement)
Sources
Indice 500 takes the ORALEDS 46 module (46
LEDs) in version R0, R7 and S (top mounted
Indice 500)
Total power consumption with 350mA power
supply: 64W
Indice 620 takes the ORALEDS 66 module (66
LEDs) in version R0 or R7
Total power consumption with 350mA power
supply: 88W
Eco design
Complies with the European RoHS directive
Eligible for the Energy Effi ciency Certifi cate
with ULOR < 3%
High recyclability rate
Material analysis (with power unit)
Indice 500: Aluminium 86%, Plastic 6%,
Others 7%, Steel 1%
Indice 620: Aluminium 87%, Plastic 6%,
Others 6%, Steel 1%
Weight - Windage
Indice 500: 10.7kg - 0.08m²
Indice 620: 15kg - 0.12m²
Ø 500
19
2
INDICE 500 ORALEDS
INDICE 620 ORALEDS
Ø 620
23
3
IND
ICE
LE
D L
um
inaire
s
215
Photometric distributions _ Typical photometric data
Maintenance
- Opening and closing
Opening of the luminaire without tools by
pressing the pushbutton on the luminaire
body
Luminaire held open by a safety stay
- ORALEDS maintenance
Direct access to the ORALEDS module
Quick connectors for power unit
ORALEDS module interchangeable on site
IP rating
Degree of protection IP66 according to
standard EN 60529
High temperature extruded pneumatic
silicone gasket
Cable gland with anchoring device
Luminaire breathes through activated
carbon fi lter
SQ: Indice spoon suspended mounting
external Ø 60mm (Graphic dome)
L: Indice side entry mounting for bracket end with external Ø
60mm (any dome)
Top: Indice Top fi tting
Ø 60mm
(any dome)
LL: Indice lateral U-
bracket (any dome)
LP: Indice top mounted
U-bracket (any dome)
SM: Indice suspended
with nipple Ø ¾” thread
(any dome)
- 90 ° 90 °
- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Indice 500/620 - ORALEDS R0 - 46/66 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Imax = 640 cd/klm
400 0 °
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
400
0
cd/klm
Indice 500/620 - ORALEDS R7 - 46/66 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Imax = 567 cd/klm
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Indice 500 - ORALEDS S - 46 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Imax = 405 cd/klm
400
Mechanical interfaces
SR: Indice suspended
with swivel joint (Graphic,
Spiral domes)
SC: Indice suspended
catenary mounting (any
dome),
CATELUX (cf. page 296)
CHORUS LED Luminaires
CHORUSApplications
Main roads and secondary urban and inter-urban roads
Cycle paths, pedestrian walkways, residential areas
Recommended heights:
Chorus 45: 4 to 6m
Chorus 55: 6 to 8m
Information for specifi ers
Luminaire available in 2 homothetic sizes: Chorus 45 and Chorus 55.
IP66
IK08
Class I or II
Body and frame in injected aluminium
Spun aluminium dome
Luminaire available in Top, lateral mounted or Suspended versions
Polyester powder coating, any RAL colour available
ORALEDS Module
Standardised module including:
- injected aluminium optical plate, each LED with an individual ORALENS lens for
asymmetrical lighting distribution. Two tilt angles available according to type of mounting:
pre-tilted to 7° (R7), or tilt 0° (R0)
Plate available in two colours: sand grey 150 and sand grey 900
- Injected aluminium heat cooler
- power unit, ORADRIVE multifunctional driver, dimmer and power connection
Road type distribution (highly extensive)
Colour temperature 4300K (neutral white)
ORADRIVE driver with integrated thermal protection
Optional functionalities:
- motion sensor (ORALEDS 46) with
dimmable option and timer
- control options (astronomical clock,
telemanagement)
Sources
Chorus 45 takes the ORALEDS 46 module
(46 LEDs) in version R0 or R7
Total power consumption with 350mA
power supply: 64W
Chorus 55 takes the ORALEDS 66 module
(66 LEDs) in version R0 or R7
Total power consumption with 350mA
power supply: 88W
Eco design
Complies with the European RoHS
directive
Eligible for the Energy Effi ciency Certifi cate
with ULOR < 3%
High recyclability rate
Material analysis (with power unit)
Chorus 45: Aluminium 84%, Others 9%,
Steel 4%, Plastic 3%
Chorus 55: Aluminium 86%, Others 7%,
Steel 4%, Plastic 3%
Weight - Windage
Chorus 45: 9.9kg - 0.07m²
Chorus 55: 13.7kg - 0.09m²
In the LED version, CHORUS is available in 2 sizes: Chorus 45 and Chorus 55
These LED luminaires use mainly the same components as the CHORUS models with discharge lamps.
The combinations of brackets and arms are the same as for the versions with traditional lamps in order to allow aesthe-tic continuity with items already in place.
The lighting is provided by ORALEDS module. The re-fl ectors and control gear are interchangeable with existing items.
CHORUS 45 ORALEDS
CHORUS 55 ORALEDS
Ø 455
175
Ø 555
210
CH
OR
US
LE
D L
um
inaire
s
217
Photometric distributions _ Typical photometric data
- 90 ° 90 °
- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Chorus 45/55 - ORALEDS R0 - 46/66 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Imax = 640 cd/klm
400 0 °
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
400
0
cd/klm
Chorus 45/55 - ORALEDS R7 - 46/66 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Imax = 567 cd/klm
Mechanical interfaces
Notched swivel joint allowing the lumi-
naire to be tilted
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature extruded pneumatic silicone gasket
Cable gland with anchoring device
Luminaire breathes through activated carbon Þ lter
Maintenance
- Opening and closing
Opening of luminaire by 3 quarter turn
screws
LED plate swivels on an aluminium hinge
- ORALEDS maintenance
Direct access to the ORALEDS module
Quick connectors for power unit
ORALEDS module interchangeable on site
LRL: Chorus side entry with swivel joint cou-
pled with sleeve for bracket end with external
¯ 60mm
LR: Chorus Side entry with swivel joint and
¯ ¾Ó thread
TOP: Chorus Top or Bitop Þ tting for pole
¯ 60/62mm
Luminaire tilted to 10¡
LL: Chorus side entry coupled with sleeve for
bracket end with external ¯ 60mm
SC: Chorus Suspended Catenary mounting
CATELUX (cf. page 296)
METRO LED Luminaires
METROApplications
Main roads and secondary urban and inter-urban roads
Cycle paths, pedestrian walkways, residential areas.
Recommended heights:
Metro 45: 4 to 6m
Metro 55: 6 to 8m
Information for specifi ers
Luminaire available in 2 homothetic sizes: Metro 45 and Metro 55
IP65
IK08
Class I or II
Spun aluminium body
Frame and summit swivel joint made of cast aluminium
Luminaire available in a Suspended version
Polyester powder coating, any RAL colour available
ORALEDS Module
Standardised module including:
- injected aluminium optical plate, each LED with an individual ORALENS lens for asym-
metrical lighting distribution. Two tilt angles available according to type of mounting:
pre-tilted to 7¡ (R7), or tilt 0¡ (R0)
Plate available in two colours: sand grey 150 and sand grey 900
- Injected aluminium heat cooler
- power unit, ORADRIVE multifunctional driver, dimmer and power connection
Road type distribution (highly extensive)
Colour temperature 4300K (neutral white)
ORADRIVE driver with integrated thermal protection
Optional functionalities:
- motion sensor (ORALEDS 46) with dim-
mable option and timer
- control options (astronomical clock,
telemanagement)
Sources
Metro 45 takes the ORALEDS 46 module
(46 LEDs) in version R0 or R7
Total power consumption with 350mA
power supply: 64W
Metro 55 takes the ORALEDS 66 module
(66 LEDs) in version R0 or R7
Total power consumption with 350mA
power supply: 88W
Eco design
Complies with the European RoHS
directive
Eligible for the Energy EfÞ ciency CertiÞ cate
with ULOR < 3%
High recyclability rate
Material analysis (with power unit)
Metro 45: Aluminium 83%, Other 13%,
Plastic 4%,
Metro 55: Aluminium 86%, Other 10%,
Plastic 4%,
Weight - Windage
Metro 45: 6.6kg - 0.06m²
Metro 55: 9.3kg - 0.09m²
In the LED version, Metro is available in two sizes: Metro 45 and Metro 55.
These LED luminaires use mainly the same components as the Metro models with discharge lamps.
The combinations of brackets and arms are the same as for the versions with traditional lamps in order to allow aesthe-tic continuity with items already in place.
The lighting is provided by ORALEDS module. The re-fl ectors and control gear are interchangeable with existing items.
METRO 45 ORALEDS
METRO 55 ORALEDS
Ø 565
Ø 465
270
245
ME
TR
O L
ED
Lum
inaire
s
219
Photometric distributions _ Typical photometric data
- 90 ° 90 °
- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Metro 45/55 - ORALEDS R0 - 46/66 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Imax = 640 cd/klm
400 0 °
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
400
0
cd/klm
Metro 45/55 - ORALEDS R7 - 46/66 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 5°
Imax = 567 cd/klm
IP rating
Degree of protection IP65 according to standard EN 60529
High temperature extruded pneumatic silicone gasket
Maintenance
- Opening and closing
Opening of luminaire by 3 quarter turn
screws
LED plate swivels on an aluminium hinge
- ORALEDS maintenance
Direct access to the ORALEDS module
Quick connectors for power unit
ORALEDS module interchangeable on site
Mechanical interfaces
SRL: Metro Suspended with swivel joint coupled
with sleeve for bracket end
with external Ø 60 mm
SR: Metro Suspended with swivel joint and
Ø ¾” thread for female boss welded onto
bracket
SC: Metro Suspended Catenary mounting
REFLEX LED Luminaires
Design : J-M WILMOTTE
REFLEXApplications
Car parks, parks and gardens
Recommended height: 4 to 5m
Information for specifi ers
IP66
IK08
Class I or II
Bladed cone and arms made of cast aluminium
Lens-refl ector made of composite material
Polyester powder coated, any RAL colour available
Module ORALEDS
Standardised module including:
- injected aluminium optical plate, each LED with an individual ORALENS lens for
asymmetrical lighting distribution. Two tilt angles available according to type of mounting:
pre-tilted to 7° (R7), or tilt 0° (R0)
Plate available in two colours: sand grey 150 and sand grey 900
- Injected aluminium heat cooler
- power unit, ORADRIVE multifunctional driver, dimmer and power connection
Road type distribution (highly extensive)
Colour temperature 4300K (neutral white)
ORADRIVE driver with integrated thermal protection
Optional functionalities:
- motion sensor with dimmable option and timer
- control options (astronomical clock, telemanagement)
- LED Indirect lighting integrated in the base
Sources
Refl ex 45 takes the ORALEDS 46 module
(46 LEDs) in versions R0, R7 and S
Total power consumption with 350mA
power supply: 64W
Eco design
Complies with the European RoHS
directive
Eligible for the Energy Effi ciency Certifi cate
with ULOR < 3%
High recyclability rate
Material analysis
Refl ex: Aluminium 57%, Polyester 38%,
Steel 3%, Glass 2%
Weight - Windage
Refl ex: 15.1kg - 0.08m²
REFLEX ORALEDS
Ø 900
900
RE
FL
EX
LE
D L
um
inaire
s | D
esig
n : J
-M W
ILM
OTTE
221
Photometric distributions _ Typical photometric data
IP rating
Degree of protection IP66 according to standard EN 60529
Extruded silicone gasket
Cable grommet
Mechanical interfaces
Luminaire mounted on the top of a speciÞ c steel pole ¯ 90mm with a
spigot ¯ 70mm x 100mm
Maintenance
- ORALEDS maintenance
ORALEDS frame removable by 4 screws ORALEDS module interchangeable on site
- 90 ° 90 °
- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Reflex - ORALEDS R0 - 46 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Imax = 640 cd/klm
400 0 °
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
400
0
cd/klm
Reflex - ORALEDS R7 - 46 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Imax = 567 cd/klm
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Reflex - ORALEDS S - 46 LEDs
0%
10%
20%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 0°
Imax = 405 cd/klm
400
Option : Eclairage indirect
IDYLLE LED Luminaires
IDYLLEApplications
Car parks, parks and gardens
Residential areas
Recommended height: 4 to 5m
Information for specifi ers
IP66
IK: 60 Joules
Class I or II
Injected aluminium base
Spun aluminium cap
Polycarbonate or PMMA diffuser
Luminaire supplied pre-wired
Polyester powder coated, any RAL colour available
Sources
- Top part:
set of 18 LEDs with ORALENS lens arranged horizontally
- Bottom part:
set of 18 LEDs with circular collimators at a 60¡ angle
Colour temperature 4300K (neutral white)
Total power consumption with 350mA power supply: 46W
Eco design
Idylle is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 20%
Complies with the European RoHS
directive
High recyclability rate
Material analysis
Idylle: Aluminium 65%, Plastic 28%, Steel
1%, Other 6%
Weight - Windage
Idylle: 7.2kg - 0.15m²
Ø 60/62
Ø 522
IDYLLE
628 33
618
2
IDY
LLE L
ED
Lum
inaire
s
10.00m0.00
10.00m
0.00
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C1800
cd/klm
Idylle - 36 LEDs
320
223
Distribution photométrique
IP rating
Degree of protection IP66 according to standard EN 60529
High temperature moulded silicone gasket on base
Cable gland with anchoring device
Mechanical interfaces
Post top mounted, fastened by 4 screws
Maintenance
- Opening and closing
Opening by removing the diffuser by
means of 4 safety screws located in the
base
- Control gear maintenance
Access to the control gear by removing
the complete 36 LED module
- Maintenance of the sources
36 LED module interchangeable on site
MAMBA LED Luminaires
MAMBAInformation for specifi ers
IP66 for the luminaire part
IK08
Class I or II
Pole/luminaire made of hot dipped galvanised rectangular section steel, bent
Lighting by 5 modules of 6 LEDs with ORALENS lenses
Electronic power supply for each module
Polyester powder coating, any RAL colour available
ORALENS
Road type distribution (highly extensive)
Colour temperature 4300K (neutral white)
Sources
5 module of 6 LEDs with individual ORALENS lens for asymmetrical lighting distribution
Colour temperature 4300K (neutral white)
Total power consumption with 350mA power supply: 42W
Eco design
Eligible for the Energy EfÞ ciency CertiÞ cate
with ULOR < 3%
Recyclability rate over 95%
Material analysis
Mamba: Steel 99%, Other 1%
Weight - Windage
Mamba: 90kg - 1.13m²
MA
MB
A L
ED
Lum
inaire
s
225
Distribution photométriqueTypical photometric data
Support
Height: 4.5m section 180 x 80 mm
Maintenance
- Control gear maintenance
Shunt in the die cast aluminium rectangular cap with cable
clamp
Connection box accessible through the pole inspection
door.
- Maintenance of the sources
Replacement of a 6-LEDs module by unscrewing and
disconnecting the quick connector.
IP rating
Degree of protection IP66 according to standard EN 60529
Silicone gaskets
Mechanical interfaces
Flange plate Þ xing centers 200 x 200 mm
4 anchor bolts JT-M18 x 400
260
260
1450
Mamba - 30 LEDs
0%
10%
20%
50%
70%
l/h 1.5-1 -0.5 0 0.5 1
500
- 90 ° 90 °
0 °- 45 ° 45 °
0
C90 - C270C0 - C1800
cd/klmImax = 602 cd/klm
4512
1320
80
83°
10°
180
227
Columns and Bollards
Image RangeLumière RangeLuminairesLED LuminairesColumns and bollards
Wooden range Floodlights and built-in lightingStandalone lighting SpecialitiesTechnical annex
229
Columns and bollards
Contents
Amarante // p. 230
Alex // p. 232
Havane // p. 233
Atlante // p. 234
Cadix // p. 236
Garig // p. 237
Alubois // p. 238
Transfert bollard // p. 239
Totem bollard // p. 240
AMARANTE Columns and bollards
Information for specifi ers
IP66
IK09
Class I or II
Direct refl ectors: Road distribution: Optitec® 17, Asymmetrical, Circular
Refl ectors in polished, anodised aluminium
Total height 4m
Clear PMMA tube, Ø 170mm
Cast aluminium base
Control gear integrated on removable tray, placed in the base of the luminaire
Direct refl ector option: decorative screen printing for PMMA tube
Polyester powder coated, any RAL colour available
Sources
Amarante direct refl ectors:
Model MH G12 MH PGZ12
Amarante Road distribution 35W /
70W /
100W /
Amarante Circular and Asymmetrical
distribution35W 45W
70W 60W
100W 90W
Amarante LED:
4 modules of 6 LEDs
3 different types of modules:
- Type 1 module: 6 individual ORALENS lenses providing asymmetrical distribution
- Type 2 module: 6 medium beam lenses
- Type 3 module: 6 wide beam lenses
Total power consumption with 350mA power supply: 31W
AMARANTE
Support
Tubular galvanised steel pole, Ø 168mm
Height: 3m
1050
794
Ø 168
Ø 182
AMARANTE
AM
AR
AN
TE
Colu
mns a
nd
bolla
rds
IP rating
Degree of protection IP66 according
to standard EN 60529
Extruded silicone gasket on the base
Option
Screen print 1 available on
asymmetrical AMARANTE
Screen print 2 available on circular
AMARANTE
Standard colours: sand grey 150 and
sand grey 900
Photometric distributions _ Typical photometric data
Imax = 194 cd/klm
Amarante - asymmetrical reflector - CW 90W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
640
0
10.00m0.00
10.00m
0.00
C90 - C270C0 - C180
AMARANTE LEDRoad distribution ORALENS
400
500
300
200
100
90.0° 90.0°67.5° 67.5°45.0° 45.0°22.5° 22.5°0.0°
C90 - C270C0 - C180
AMARANTE LEDMedium beam distribution
1000
1200
800
600
400
200
90.0° 90.0°67.5° 67.5°45.0° 45.0°22.5° 22.5°0.0°
C90 - C270C0 - C180
AMARANTE LEDWide beam distribution
1000
1200
800
600
400
200
90.0° 90.0°67.5° 67.5°45.0° 45.0°22.5° 22.5°0.0°
Imax = 222 cd/klm
Amarante - circular reflector - CW 90W
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
250
0
10.00m0.00
10.00m
0.00
Imax = 627 cd/klm
Amarante - Optitec® 17 - MH 70W G12
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
320
0
10 00m0 00
10.00m
0.00
Mechanical interfaces
Male mounting bracket for post top mounting
Module KIDLEDS
Adjustable LED module (± 40°)
Maintenance
- Opening and closing of the luminaire
Direct version: removal by 2 screws and
tipping the cover
LED version: removal of the diffuser
assembly by pressure screw and quarter
turn system
- Maintenance of the lamp
Access to the lamp and KIDLEDS modules
by removing the diffuser
Interchangeable KIDLEDS module
Quick connectors
Screen print 1 Screen print 2
231
ALEX Columns and bollards
Information for specifi ers
IP65 (Optical unit)
IP44 (electrical unit)
IK07
Class I
Optitec® 17 refl ector in polished, anodised aluminium
Total height 4.5m
Clear PMMA diffuser, Ø 180mm
Cast aluminium base
Control gear in separate box housed in the bottom of the pole
Polyester powder coated, any RAL colour available
Sources
Model MH G12
ALEX (main refl ector for road distribution) 35W
70W
100W
ALEX (secondary refl ector for illumination of leafy areas) 35W
Photometric distributions _ Typical photometric data
ALEX
IP rating
Degree of protection IP65 (optical unit) and
IP44 (electrical unit), according to standard
EN 60529
High temperature extruded silicone gasket
on the base
Pole
Tubular galvanised steel pole, Ø 180mm
Height 3.6m
Wall bracket on steel base also available
Outreach 300mm
Separate control gear
Mechanical interfaces
Male mounting bracket for post top
mounting
Maintenance
Access to the 2 lamps by removing the
diffuser
Imax = 627 cd/klm
Alex - Optitec® 17 - MH 35W G12
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
320
0
10.00m0.00
10.00m
0.00
15 20
10
15 10
5
899
Ø 180
Ø 180
ALEX
HA
VA
NE
Colu
mns a
nd
bolla
rds
IP rating
Degree of protection IP65 (refl ector) and
IP44 (control gear), according to standard
EN 60529 Silicone gaskets
Support
Inverted steel conical pole, Ø 180mm at
the top, Ø 125mm at the base
Height 3.5m
Mechanical interfaces
Luminaire mounted post top mounted and
fastened by stainless steel screws
Maintenance
Access to the tube by removing the cap,
disconnection and partial removal of each
refl ector
Information for specifi ers
IP65 (optical unit)
IP44 (electrical unit)
IK09
Class I
Opal PMMA diffuser, Ø 170mm, protected by decorative rings made of
injected aluminium
Sliding aluminium refl ectors, removable separately
Cast aluminium cap and base
Total height 5m
Control gear in separate box housed in the bottom of the pole
Polyester powder coated, any RAL colour available
Sources
4 36W fl uorescent tubes
Distribution photométrique _ Typical photometric data
HAVANE
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270CO - C180
80
0
10.00m0.00
10.00m
0.00
I max = 55 cd/klm
Havane - 4x36 W
1360
210
HAVANE
233
ATLANTE Columns and bollards
Information for specifi ers
IP66
IK09
Class I or II
Refl ectors in polished, anodised aluminium
Opal PMMA diffuser, Ø 170mm
Top of diffuser protected by an aluminium cap
Cast aluminium base
Total height 4.5m
Control gear integrated on removable tray, placed in the base of the luminaire
Polyester powder coated, any RAL colour available
Sources
Model MH G12
ATLANTE 70W
100W
Photometric distributions _ Typical photometric data
IP rating
Degree of protection IP66 according to
standard EN 60529
Silicone gasket
Mechanical interfaces
Male mounting bracket for post top
mounting
Support
Tubular galvanised steel pole, Ø 168mm
Height 3.2m
Maintenance
Diffuser removed by quarter turn system and
locking screw
Direct access to the lamp
ATLANTE
Imax = 74 cd/klm
Atlante - MH 100W G12
- 90 ° 90 °
0 °- 45 ° 45 °
C90 - C270C0 - C180
100
0
10.00m0.00
10.00m
0.00
13
00
90
Ø 168
Ø 170
ATLANTE
AT
LA
NT
E C
olu
mns a
nd
bolla
rds
235
CADIX Columns and bollards
Information for specifi ers
Available in 2 sizes: Cadix 600, Cadix 1000
IP44
IK07
Class I or II
Aluminium section tube, Ø 200mm
Cast aluminium cap
Opal PMMA diffuser, protected by decorative rings made of injected
aluminium
Control gear integrated on a removable tray
Polyester powder coated, any RAL colour available
Optional: LED lighting
Sources
Model HPS MH FLUOCOMPACT
CADIX 70W (E27) 70W (E27) 20W
/ / 23W
Installation
Cast aluminium base
Internal fastening by 3 anchor bolts, Ø 12mm on Ø 134mm
IP rating
Degree of protection IP44 according to standard EN 60529
Silicone gaskets
CADIX
10
00
60
0
120°
120°
Ø 134
CADIX
Maintenance
Access to the lamp and the control gear
is by removing the section tube
GA
RIG
Colu
mns a
nd
bolla
rds
Information for specifi ers
2 models:
- Garig 1 with decorative external rings made of injected aluminium
- Garig 2 with polycarbonate diffuser and internal louvers
Available in 2 heights, 600 mm and 1050 mm
IP66
IK08 (Garig 1) - IK10 (Garig 2)
Class I
Aluminium section tube and cast aluminium cap, Ø200 mm
Integrated control gear
Polyester powder coated
Standard colour: cast iron grey
Sources
Model HPS MH FLUOCOMPACT
GARIG 70W (E27) 70W (E27) 42W
/ / 57W
Installation
Internal fastening by anchoring kit
IP rating
Degree of protection IP66 according to standard EN 60529
Silicone gaskets
Maintenance
Access to the lamp and the control gear by
removing the head
GARIG
10
50
60
0
GARIG 2GARIG 1
120°Ø 10Ø 125
120°
237
ALUBOIS Columns and bollards
Information for specifi ers
Available in 2 versions:
- Alubois 1: with decorative external rings made of injected aluminium
- Alubois 2: with polycarbonate diffuser and internal louvers
IP65
IK08 (Alubois 1) - IK10 (Alubois 2)
Class I
Aluminium section tube and cast aluminium cap, Ø 200mm
Cylindrical glued-lamellated larch wood shaft, Ø 200mm
Control gear integrated on a removable tray
Finish:
- Metal parts: polyester powder coating, standard colour cast iron grey
- Wooden shaft: satin varnished chestnut colour, please enquire for other
colours
Sources
Model HPS MH FLUOCOMPACT
ALUBOIS 70W (E27) 70W (E27) 42W
/ / 57W
Installation
Cast aluminium base
External fastening by 4 anchor bolts, Ø 12mm with fi xing centre
section 200 x 200mm
IP rating
Degree of protection IP65 according to standard
EN 60529
Silicone gaskets
Maintenance
Access to the lamp and the control gear is by
removing the head
ALUBOIS
800
ALUBOIS 1 ALUBOIS 2
200
200
Ø 14
TR
AN
SF
ER
T C
olu
mns a
nd
bolla
rds
Information for specifi ers
IP44
IK07
Class I
Cast aluminium base and cap
Opal PMMA diffuser
Injected aluminium decorative rings
Cast aluminium decorative side trim
Cylindrical glued-lamellated larch wood shaft, Ø 200mm
Integrated control gear
Finish:
- Metal parts: Polyester powder coating
- Wooden shaft: satin varnished chestnut colour, please enquire for other
colours
Sources
Model HPS MH FLUOCOMPACT
TRANSFERT 50W (E27) 50W (E27) 20W
70W (E27) 70W (E27) 23W
Installation
Cast aluminium base
External fastening by 4 anchor bolts, Ø 12mm with fi xing centre
section 200 x 200mm
IP rating
Degree of protection IP44 according to standard EN 60529
Silicone gaskets
TRANSFERT
Maintenance
Access to the lamp and the control gear by
removing the cap and the 3 tamper-proof
stainless steel screws
800
200
200
Ø 14
TRANSFERT
239
TOTEM Columns and bollards
Information for specifi ers
IP44
IK07
Class I
Cast aluminium base and cap
Opal PMMA diffuser
Injected aluminium decorative rings
Cylindrical glued-lamellated larch wood shaft, Ø 200mm
Integrated control gear
Finish:
- Metal parts: Polyester powder coating
- Varnished wooden shaft: chestnut colour, please enquire for other
colours
Sources
Model HPS MH FLUOCOMPACT
TOTEM 50W (E27) 50W (E27) 20W
70W (E27) 70W (E27) 23W
Installation
Cast aluminium base
External fastening by 4 anchor bolts, Ø 12mm with fi xing centers
200 x 200 mm
IP rating
Degree of protection IP44 according to standard EN 60529
Silicone gaskets
TOTEM
Maintenance
Access to the lamp and the control gear by
removing the cap and the 3 tamper-proof
stainless steel screws
800
TOTEM
200
200
Ø 14
TO
TE
M C
olu
mns a
nd
bolla
rds
241
243
Wooden range
Image RangeLumière RangeLuminairesLED LuminairesColumns and bollards
Wooden range Floodlights and built-in lightingStandalone lighting SpecialitiesTechnical annex
245
Wooden Range
Contents
The Wooden range // p. 246
Totem // p. 248
Altaïs // p. 250
Kiowa // p. 252
Stuff // p. 254
Transfert // p. 256
Environmental advantages
Glue-lamellated wood uses species grown in
managed European forests.
Its rational management ensures forest resources
are reconstituted.
Growing 1kg of wood in a developing forest absorbs
1.5 kg of CO2 and produces 1kg of oxygen.
The environmental impact relating to the use of glues
is reduced by the use of decantation techniques and
biological treatment.
Manufacturing technique
ECLATEC uses larch wood, a species grown in
managed forests. This species is particularly suited
to the production of glue-lamellated poles.
Shaft production involves several stages:
- Logs cut into square edged planks.
- Hygroscopic and thermal stabilisation.
- Machining of the joints, abutting and gluing to
constitute the laminated strips.
- Assembly of the strips to constitute a beam with
the dimensional and mechanical properties required.
- After the glue has set, the shaft is planed and
turned before applying the varnish.
Glue-lamellated wooden solutions,a modern, environmentally friendly concept applied to lighting.Combining aesthetic and mechanical qualities, wood is a durable, renewable material whose use is a must if we want to protect nature.
Offering multiple possibilities, the wooden units can be used in the most demanding locations.
GENERAL Wooden Range
1
5 6 7 8
2 3 4
Stages in the manufacturing of ECLATEC wooden poles
cutting the trunks
gluing the strips
cutting the square edged planks cutting the strips
planing the beam applying the treatment installation on site
purging and abutting
Standardisation
Species used perfectly suited to the glue-lamella-
ted process.
Class 3 resistance in accordance with standard
EN 335
Elimination of defects, knots, sapwood in accor-
dance with standards EN 518 - EN 519
Fungicidal treatment
ACERBOIS GLULAM certiÞ cation:
- resistance class in accordance with standards
EN 386 and EN 1194
- use class in accordance with standard EN 350
- anti-termite treatment
- type of adhesive used in accordance with EN
301 Ð EN 302
- use of timber from sustainably managed forests
ECLATEC wooden assemblies, with steel bases,
comply with standard EN 40
Finishing treatment
- Sealing varnish with an acrylate dispersion base
and alkyd resins.
Three-coat application.
Decorative satin Þ nish.
- Aqueous phase impregnation, solvent-free.
Three-coat application.
Non-Þ lm forming.
Colours: Willow, Pine, Chestnut, Walnut, Ro-
sewood
Maintenance
A maintenance coat of varnish will need to be ap-
plied at regular intervals, depending on conditions
of exposure
GE
NE
RA
L W
ood
en R
ange
RosewoodWalnutChestnutPineWillow
247
TOTEM Wooden Range
Information for specifi ers
Cylindrical wooden pole
Glue-lamellated larch wood
Total height:
4.7m for pole ¯ 140mm
6.7m for pole ¯ 168mm
Wooden shaft assembled on base by press Þ tting and screwing
Tubular galvanised steel base, height 1.5m
Inspection door for electrical connection
FinishesMetal parts: polyester powder coating, any RAL colour available
Aluminium cap
Wooden shaft: satin varnished chestnut colour, please enquire for other colours
Fastening interface
Height 4.7m
Fastening by 4 anchor bolts JT 16/14 x 300mm with Þ xing centres 200 x 200 mm
Height 6.7m
Fastening by 4 anchor bolts JT 20/18 x 400mm with Þ xing centres 300 x 300 mm
Colour chart
TOTEMMechanical interfaces
Pole mounting by fastening plate
Fixed to pole by collar clamp
RosewoodWalnutChestnutPineWillow
TO
TE
M W
ood
en R
ange
6 m
5 m
4 m
TOTEM ELIPT TOTEM STRATUS SAXO
TOTEM INDICE SAÏA TOTEM ORION
Totem Stratus Saxo fi tting
Confi gurations: single bracket, double
bracket. Total height: 4.7 and 6.7m
Luminaire: Stratus, page 154
Saxo bracket: aluminium
Outreach 650mm and 1200mm
Luminaire suspended version with swivel
joint
Bracket fastened onto the pole by collar
clamp
Totem Indice Saïa fi tting
Confi gurations: single bracket, double
bracket
Total height: 4.7 and 6.7m
Luminaire: Indice Graphic,
pages 160, 214
Saïa bracket: aluminium
Luminaire lateral mounted with U-bracket
Totem Orion fi tting
Confi gurations: single bracket, double
bracket
Total height: 4.7 and 6.7m
Luminaire: Orion, page 266
Orion bracket: aluminium
Floodlights mounted on the bracket by
steel U-bracket
Totem Elipt Assembly
Luminaire designed by J-M Wilmotte
Confi gurations: single bracket, double
bracket
Total height: 4.7 and 6.7m
Luminaire: Elipt, pages 158, 212
Fastening plate: cast aluminium
Luminaire lateral mounted with swivel joint
249
ALTAÏS Wooden Range
ALTAÏS
Mechanical interfaces
Fastened on pole by a fastening plate
Fastened by lateral top spigot
Information for specifi ers
Conical octagonal-section wooden pole
Glue-lamellated larch wood
Total height: 4m, 5m and 6m
Wooden shaft assembled on base by press Þ tting and screwing
Square section galvanised steel tubular base:
140mm galvanised steel, height 1.3m for pole height 4m;
150mm galvanised steel, height 1.5m for pole height 5m;
160mm galvanised steel, height 1.5m for pole height 6m;
Inspection door for electrical connection
FinishesMetal parts: polyester powder coating, any RAL colour of your choice
Galvanised steel cap
Wooden shaft: satin varnished chestnut colour, please enquire for other colours
Fastening interface
Height 4 and 5m
Fastening by 4 anchor bolts JT 16/14 x 300mm with Þ xing centres 200 x 200mm
Height 6m
Fastening by 4 anchor bolts JT 20/18 x 400mm with Þ xing centres 300 x 300mm
Colour chart
RosewoodWalnutChestnutPineWillow
ALTA
ÏS W
ood
en R
ange
ALTAÏS INDICE PARA
ALTAÏS TSANA PICO
ALTAÏS PIXEL MAKA
ALTAÏS METRO RETRO
Altaïs Tsara Pico Assembly
Confi gurations: single bracket, double
bracket
Recommended height: 4 to 6m
Luminaire: Tsana, page 208
Pico bracket: steel
Outreach 500mm and 1000mm
Tilt 5¡
Luminaire lateral mounted on a cast
aluminium spigoy (optional: cf. page 298)
Bracket plate mounted on the pole
Altaïs Pixel Maka Assembly
Luminaire designed by STOA
consultancy
Confi gurations: single bracket, double
bracket
Recommended height: 4 to 6m
Luminaire: Pixel LED, pages 204, 206
Maka bracket: steel
Outreach 500mm and 1000mm
Tilts 2¡, 5¡ and 10¡
Luminaire lateral mounted onto the
bracket
Bracket post top mounted
Altaïs Metro Retro Assembly
Confi gurations: single bracket, double
bracket
Recommended height: 4 to 6m
Luminaire: Metro, pages 164, 218
Retro racket: steel
Outreach 780mm
Luminaire suspended with swivel joint
Bracket plate mounted on the pole
Altaïs Indice Para Assembly
Confi gurations: single bracket, double
bracket
Recommended height: 4 to 6m
Luminaire: Indice Graphic, pages 160,
214
Para bracket: aluminium
Outreach 500mm
Spoon mounting version of the luminaire
Bracket plate mounted on the pole
6 m
5 m
4 m
251
KIOWA Wooden Range
KIOWA
Mechanical interfaces
Fastening plate mouting
Top spigot mounting, ¯ 60 x 100mm
Information for specifi ers
Conical wooden pole
Glue-lamellated larch wood
Total height: 4m, 5m and 6m
Cylindroconical wooden shaft, assembled on the base by press Þ tting and screwing
Tubular galvanised steel base
¯ 140mm, height 1.3m for 4m pole,
¯ 140mm, height 1.5m for 5m pole,
¯ 168mm, height 1.5m for 6m pole,
Trap door for electrical connection
FinishesMetal parts: polyester powder coating, any RAL colour at your choice
Galvanised steel cap
Wooden shaft: satin varnished chestnut colour, please enquire for other colours
Fastening interface
Height 4 and 5m
Fastening by 4 anchor bolts JT 16/14 x 300mm with Þ xing centres 200 x 200mm
Height 6m
Fastening by 4 anchor bolts JT 20/18 x 400mm with Þ xing centres 300 x 300mm
Colour chart
RosewoodWalnutChestnutPineWillow
KIO
WA
Wood
en R
ange
KIOWA CHORUS KIOWA ELYXE
KIOWA TSANA GOLF
KIOWA INDICE LYRE
Kiowa Elyxe Assembly
Luminaire designed by L. Davy
Confi guration: single
Total height: 4 to 6m
Luminaire: Elyxe, pages 150, 210
Spigot: aluminium
Top mounting
Kiowa TsaNa Golf Assembly
Confi gurations: single bracket, double
bracket
Total height: 4 to 6m
Luminaire: Tsana, page 208
Golf bracket: steel
Outreach 500mm and 1000mm
Tilts 0¡ and 5¡
Luminaire side mounted on a cast
aluminium Þ tting (optional decorative trim;
cf. page 298)
Bracket plate mounted on the pole
Kiowa Indice U-bracket Assembly
Confi guration: single
Total height: 4 to 6m
Luminaire: Indice Graphic, pages 160,
214
Fitting: aluminium
Post top mounting
Kiowa Chorus Assembly
Confi gurations: single bracket, double
bracket
Total height: 4 to 6m
Luminaire: Chorus, pages 162, 216
Fastening plate: cast aluminium
Luminaire lateral mounted with swivel joint
on a fastening plate
6 m
5 m
4 m
253
STUFF Wooden Range
Information for specifi ers
Single bracket, double bracket, rear bracket assembly
Recommended height: 5m, 7m, 8m and 9m
Luminaire Elipt 45, Elipt 55, pages 158, 212
Stuff PoleConical wooden shaft
Glue-lamellated larch wood
- lighting height 5m: ¯ at the bottom: 140mm, ¯ at the top: 110mm
- lighting height 7m: ¯ at the bottom: 194mm, ¯ at the top: 150mm
- lighting heights 8 and 9m: ¯ at the bottom: 219mm, ¯ at the top: 150mm
Tubular galvanised steel base, height 1.5m
Inspection door for electrical connection
Stuff BracketAluminium bracket with decorative spigot, outreach 500mm, 1000mm and 1500mm
FinishesPolyester powder coating
Standard colour: RAL 9006
Wooden shaft: satin varnished chestnut colour, please enquire for other colours
Colour chart
STUFF
Fastening interface
Height 5m
Fastening by 4 anchor bolts JT 16/14 x
300mm with Þ xing centres 200 x 200mm
Heights 7m, 8m and 9m
Fastening by 4 anchor bolts JT 20/18 x
400mm with Þ xing centres 300 x 300mm
Mechanical interfaces
Luminaire lateral mounted with a swivel joint
Bracket top mounted on the pole
Pathway bracket with fastening plate
RosewoodWalnutChestnutPineWillow
ST
UF
F W
ood
en R
ange
255
TRANSFERT Wooden Range
Design : J-M WILMOTTE
TRANSFERTInformation for specifi ers
Wall bracket, single bracket, double bracket
Heights: 4m, 5m and 6m
Luminaires Elipt 45, Elipt 55, pages 158, 212
Transfert poleCylindrical wooden shaft
Glue-laminated larch wood
¯ 140mm for 4m pole
¯ 168mm for 5m pole
¯ 194mm for 6m pole
Aluminium section decorative trim
Tubular galvanised steel base, height 1.5m
Access door for electrical connection
Transfert bracketStructured cast aluminium bracket, outreach 380mm, 695mm, 1000mm
Tilt 0¡
Colour chart
Finishes
Polyester powder coating
Standard colour: Eclatec grey
Wooden shaft: satin varnished chestnut colour,
please enquire for other colours
Fastening interface
Heights 4m, 5m and 6m
Fastening by 4 anchor bolts JT 20/18 x 400mm
with distance between centres 300 x 300mm
Mechanical interfaces
Luminaire mounted with a speciÞ c decorative
connection
Bracket top mounted on the pole
RosewoodWalnutChestnutPineWillow
TR
AN
SF
ER
T W
ood
en R
ange | D
esig
n : J
-M W
ILM
OTTE
257
25925252525252525255252525252525525252552525252525252525252525555252225552525552252525255525252252555255555525555555552525252525252222525222222222522252222555999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999
Floodlights
and built-in lighting
Image RangeLumière RangeLuminairesLED LuminairesColumns and bollards
Wooden range
Floodlights andbuilt-in lightingStandalone lighting SpecialitiesTechnical annex
261
Floodlights and built-in lighting
Contents
Stralis // p. 262
Astris // p. 264
Orion // p. 266
PanthŽon // p. 268
Airport // p. 270
Script // p. 272
Impact // p. 273
STRALIS Floodlights and built-in lighting
Information for specifi ers
IP66
IK09
Class I
Injection die cast aluminium body
Thermally toughened ß at glass
Very high purity, hydroformed, anodised and sealed aluminium reß ector
Galvanised steel stirrup bracket with azimuth angle marking
Separate control gear on a remote tray in the bottom of the pole or in a cabinet
Ignitor box mounted on the stirrup bracket
Handle integrated in the body of the luminaire
Luminaire opens without tools
Options: Eclatec adjustable sight, precision adjustment system
Body: high temperature black paint
Sources
Metal halide double ended lamp:
- 1000W and 2000W short arc (extensive distribution)
(type POWERSTAR¨ HQI-TS 2000/D/S, OSRAM)
- 2000W long arc (intensive distribution)
(type POWERSTAR¨ HQI-TS 2000/N/L, OSRAM)
STRALIS
Material analysis
Stralis : Aluminium 55%, Steel 22%, Glass
15%, Other 8%
Weight - Windage
Stralis : 10.5kg - 0.19m² (tilt 65¡)
274
329
461
560
474
531
STRALIS
IP rating
Degree of protection IP 66 according to standard EN 60529
Silicone gaskets on body, glass and breathing system
Activated carbon Þ lter
Breathing system: situated on the lamp holder cover of the ß oodlight, the
breathing system serves to balance the internal and external pressures
during the switching on and switching off phases
Stainless steel cable gland ¯ 13mm
ST
RA
LIS
Flo
od
lights
and
built-in
lightin
g
Photometric distributions _ Typical photometric data
C90 - C270C0 - C180
STRALIS POWERSTAR HQI TS 2000 W/D/SI max = 1906 cd/klm
2000
1600
1200
800
400
90.0° 90.0°67.5° 67.5°45.0° 45.0°22.5° 22.5°0.0°
STRALIS POWERSTAR HQI TS 2000 W/N/LI max = 2216 cd/klm
90.0° 90.0°67.5° 67.5°45.0° 45.0°22.5° 0.0° 22.5°
2400
2000
1600
1200
800
400
C90 - C270C0 - C180
Mechanical interfaces
Stirrup mounting bracket, suspended or top mounted
ß oodlight
3 holes ¯ 19, distance between Þ xing centres 50mm
Maintenance
- Opening and closing the luminaire
SimpliÞ ed opening and closing without
tools by means of a tilting lamp holder
cover (release 2 snap fasteners)
- Maintenance of the lamp
Direct access to the lamp, which can be
changed without tools by means of a wing
screw
- Adjustments
Tilt angle can be read directly on the
graduated angle scale stirrup bracket.
For precision adjustment, an optional
separate sight can be Þ tted to the Þ tting.
Adjustment of the angle by protractor
device and of the direction by means of
the sight.
50 50
¯ 19
¯ 19
¯ 19
30
263
ASTRIS Floodlights and built-in lighting
Information for specifi ers
3 models: Astris AS1, Astris AS2 and Astris AS3
IP65
Ik08
Class I
Body and frame in injected die-cast aluminium
Screen printed ß at thermally toughened glass, articulated and
locked by stainless steel latches
Connection by 1 or 2 cable glands ¯ 13mm
Asymmetrical reß ector in polished, anodised aluminium
Galvanised steel stirrup bracket with angle marking
Control gear integrated on a removable tray
Luminaire opens without tools
Polyester powder coated
Standard colour: grey RAL 7035
Sources
Model HPS MH
Astris AS1 250W (E40) 250W (E40)
400W (E40) 400W (E40)
600W (E40) /
Astris AS2 1000W (E40) 1000W (E40)
Astris AS3 2 x 250W (E40) 2 x 250W (E40)
2 x 400W (E40) 2 x 400W (E40)
2 x 600W (E40) /
ASTRIS
Eco design
Astris is eligible for the Energy EfÞ ciency
CertiÞ cate, ULOR < 0 for 0¡ tilt
Complies with the European RoHS directive
High recyclability rate
Weight - Windage (with max. control
gear)
Astris AS1:
15.5kg - 0.09m² - 600W
Astris AS2 (1 source):
23kg - 0.10m² - 1000W
Astris AS2 (2 sources):
23.5kg - 0.10m² - 2 x 600W
Material analysis
Astris 1 x 400: Aluminium 50%, Glass 21%,
Steel 21%, Other 8%
Astris 1 x 1000: Aluminium 52%, Glass 22%,
Steel 20%, Other 6%
Astris 2 x 400: Aluminium 52%, Glass 20%,
Steel 20%, Other 8%
600
ASTRIS AS1
3822
16
122
492
439
521
400
495
551
645
510
655
436
216
175
ASTRIS AS2
551
510
717
495
436
216
175
655
ASTRIS AS3
IP rating
Degree of protection IP 65 according to standard EN 60529
High temperature extruded silicone gasket
2 cable glands ¯ 13mm with anchoring device
Activated carbon Þ lter
Breathing system: situated on the left side of the ß oodlight, the breathing
system serves to balance the internal and external pressures during the
switching on and switching off phases
AS
TR
IS F
lood
lights
and
built-in
lightin
g
Photometric distributions _ Typical photometric data
Mechanical interfaces
Floodlight mounted on a galvanised steel stirrup
bracket
Maintenance
- Opening and closing the luminaire
Access to the lamp by opening the two
latches (Astris AS1) or 4 latches (Astris
AS2 and AS3) and tilting of the glass on 2
stainless steel hinges
- Control gear maintenance
Access to the control gear by opening the
box (2 screws on Astris AS1 and 3 screws
on Astris AS2 and AS3) situated at the
back of the ß oodlight.
Articulates on a hinge
Connection by cable gland with anchoring
device
- Adjustments
Stirrup bracket equipped with an angular
indexing ring for a precise adjustment of
the angle by 5¡ steps
Ø 11,5Ø 10,5
Ø 13,5
Ø 11,5Ø 10,5
17080
265
100
200
300
400
500
600
22.5° 45.0° 67.5° 90.0°
C90 - C270C0 - C180
67.5° 45.0° 22.5° 0.0°90.0°
ASTRIS 400 W MH E40I max = 574 cd/klm
160
320
480
640
800
22.5° 45.0° 67.5° 90.0°
C90 - C270C0 - C180
67.5° 45.0° 22.5° 0.0°90.0°
ASTRIS 1000 W HPSI max = 780 cd/klm
100
200
300
400
500
600
700
22.5° 45.0° 67.5° 90.0°
C90 - C270C0 - C180
67.5° 45.0° 22.5° 0.0°90.0°
ASTRIS 1000 W MH E40I max = 650 cd/klm
ASTRIS 400 W HPS I max = 595 cd/klm
100
200
300
400
500
600
700
22.5° 45.0° 67.5° 90.0°
C90 - C270C0 - C180
67.5° 45.0° 22.5° 0.0°90.0°
ORION Floodlights and built-in lighting
Information for specifi ers
2 models: Orion Junior and Orion Senior
IP66
IK07
Class I
Injected die cast aluminium body
Thermally toughened ß at glass
Large range of reß ectors in polished, anodised aluminium:
symmetrical, asymmetrical or circular, intensive or extensive
Galvanised steel stirrup bracket with angle markings (Senior)
Control gear integrated on a removable tray
Accessories: hood, adjustable visor, louvres, stainless steel Þ lter
holder, coloured Þ lter (red, blue, green, yellow)
Polyester powder coated
Colour: black RAL 9005
Sources
Model HPS MH
Orion Junior 70W (E27) 70W (E27)
150W (RX7s) 150W (RX7s)
Orion Senior 250W (E40) 250W (E40)
400W (E40) 400W (E40)
ORION
Refl ectors
Polished, anodised aluminium:
- Symmetrical Intensive SI or Extensive SE
- Asymmetrical Intensive AI or Extensive AE
- Circular Intensive CI
Weight - Windage (with max. control
gear)
Orion Junior: 9kg - 0.08m² - 150W
Orion Senior: 17.5kg - 0.18m² - 400W
Asymmetrical reflector Symmetrical reflector Circular reflector
ORION JUNIOR
245
13248
332
123
ORION SENIOR
412
13248
432
153
OR
ION
Flo
od
lights
and
built-in
lightin
g
Photometric distributions _ Typical photometric data
267
Maintenance
Opening the front gives access to the lamp and the electrical
control gear
Mechanical interfaces
Painted galvanised steel stirrup bracket
Elevation and azimuth adjustment
IP rating
Degree of protection IP 66 according to standard EN 60529
Cable glands Ø 11mm
Orion Junior 70 W Symmetrical Extensive RX7s
100
200
300
400
500
22.5° 45° 67.5° 90°
C90 - C270
C0 - C180
67.5° 45° 22.5° 0°90°
Imax = 451 cd/klm
Orion Senior 400 W Asymmetrical Extensive
100
200
300
400
500
22.5° 45° 67.5° 90°
C90 - C270
C0 - C180
67.5° 45° 22.5° 0°90°
Imax = 471 cd/klm
Orion Junior 70 W Symmetrical Intensive RX7s
250
500
750
1000
1250
22.5° 45° 67.5° 90°
C90 - C270
C0 - C180
67.5° 45° 22.5° 0°90°
Imax = 1105 cd/klm
Orion Senior 250 W Symmetrical Intensive
100
200
300
400
500
22.5° 45° 67.5° 90°
C90 - C270
C0 - C180
67.5° 45° 22.5° 0°90°
Imax = 455 cd/klm
Accessories
- Hood
- Adjustable visors
- Louvre
- Stainless steel fi lter holder
- Coloured fi lters
PANTHEON Floodlights and built-in lighting
Information for specifi ers
2 models: Pantheon 1 and Pantheon 2
IP67
IK08
Class II
Injected die cast aluminium body
Thermally toughened fl at glass
Large range of refl ectors in anodised high purity aluminium: diffusing,
medium beam, semi-intensive, intensive
Integrated control gear
Galvanised steel stirrup bracket with angle marking
External screws stainless steel
Polyester powder coated
Colours available: metallic grey and aluminium grey
Sources
Model Refl ector MH G12 MH - RX7s HPS - RX7s HPS - GX12-1 MH - FC2 HPS - FC2
Pantheon 1 Diffusing / 150W 250W / 150W / 150W / / 250W 400W 250W 400W
Medium beam / 150W 250W / 150W / 150W / / 250W 400W 250W 400W
Semi-Intensive / 150W 250W / 150W / 150W / / 250W 400W 250W 400W
Intensive / 150W 250W / 150W / 150W / / 250W 400W 250W 400W
Pantheon 2 Diffusing 70W 150W / 70W 150W 70W 150W 50W 100W / / / /
Semi-Intensive 70W 150W / 70W 150W 70W 150W 50W 100W / / / /
Intensive 70W 150W / 70W 150W 70W 150W 50W 100W / / / /
Weight - Windage (with max. control
gear)
Pantheon 1: 16.5kg - 0.15m² - 400W
Pantheon 2: 10.5kg - 0.09m² - 150W
Accessories
Aluminium hood
Circular louvre
Chromed steel protection grid
PANTHEON
75
557
500
Ø 4
20
PANTHEON 1
°
Ø399
276
PANTHEON 2
Ø 3
16
75°
418
425235
Ø299
PA
NT
HE
ON
Flo
od
lights
and
built-in
lightin
g
Photometric distributions _ Typical photometric data
Pantheon 1 150 W IM Semi intensif
2000
4000
6000
8000
10000
12000
22.5° 45° 67.5° 90°67.5° 45° 22.5° 0°90°
C90 - C270
C0 - C180
Imax = 9820 cd/klm
Pantheon 2 150W MH Diffusing
100
200
300
400
500
600
22.5° 45° 67.5° 90°67.5° 45° 22.5° 0°90°
C90 - C270
C0 - C180
Imax = 532 cd/klm
Pantheon 2 150W MH Intensive
1000
2000
3000
4000
5000
6000
7000
22.5° 45° 67.5° 90°67.5° 45° 22.5° 0°90°
C90 - C270
C0 - C180
Pantheon 2 150W MH Semi-Intensive
1000
2000
3000
4000
5000
22.5° 45° 67.5° 90°
C90 - C270
C0 - C180
67.5° 45° 22.5° 0°90°
Pantheon 1 250W MH Intensive
2000
4000
6000
8000
10000
12000
14000
22.5° 45° 67.5° 90°67.5° 45° 22.5° 0°90°
C90 - C270
C0 - C180
Pantheon 1 250W MH Diffusing
400
800
1200
1600
2000
22.5° 45° 67.5° 90°67.5° 45° 22.5° 0°90°
C90 - C270
C0 - C180
269
Mechanical interfaces
Galvanised steel stirrup mounting bracket
Maintenance
- Opening and closing the luminaire
Cover removal by 4 fastening screws
- Maintenance of the lamp
Direct access to the lamp
- Control gear maintenance
Control gear cover removal by 4 fastening screws
Direct access to the control gear
235
PANTHEON 2PANTHEON 1
276
Ø 116666 6666 Ø 11
AIRPORT Floodlights and built-in lighting
AIRPORTInformation for specifi ers
2 models: Airport Junior and Airport Senior
IP65
IK10
Class I
Stainless steel fl oodlights
Integrated bladed louvre
Locking by triangular insert quarter turn key
Flat thermally toughened sealed glass
Refl ectors in polished, anodised aluminium: symmetrical intensive or extensive
Control gear integrated on a removable tray
Galvanised steel sealing frame
Optional stainless steel decorative sealing frame
Sealing frame must be installed in ground with a drainage system
Raw stainless steel insetting box
Brushed stainless steel cover
Sources
Model HPS MH
Airport Junior / 70W (RX7s)
150W (RX7s) 150W (RX7s)
Airport Senior 150W (RX7s) 150W (RX7s)
250W (FC2) 250W (FC2)
400W (FC2) 400W (FC2)
Refl ectors
Adjustable angle
Polished, anodised aluminium:
- Symmetrical Intensive (SI)
- Symmetrical Extensive (SE)
Maintenance
Removing the cover gives access to the
lamp and the electrical control gear
473 x 374
400 x 300
700 x 500
600 x 400
170
96
AIRPORT SENIOR
AIRPORT JUNIOR
AIR
PO
RT
Flo
od
lights
and
built-in
lightin
g
271
SCRIPT Floodlights and built-in lighting
SCRIPTInformation for specifi ers
2 models: Script 1 (uni-directional) and Script 2 (bi-directional)
2 possible sources: Script LED (colours: white, red, amber, green, blue) and
Script refl ector
IP67
IK08
Class I
Stainless steel body equipped with 2 cable glands Ø 13mm
Cast aluminium cover, equipped with frosted glass diffusers
Integrated control gear
Galvanised steel insetting box
Fastened in the ground by screws in an insetting box
Insetting box must be installed in ground with a drainage system
Exclusively for use in pedestrian areas
FinishCover polyester powder coated
Sources
Model MH
Script 70W (E27)
Refl ectors
Polished, anodised aluminium, circular
symmetrical (for MH)
Maintenance
Removing the cover gives access to the
lamp and the electrical control gear
SCRIPT LEDs SCRIPT REFLECTOR
28018
0
IMP
AC
T F
lood
lights
and
built-in
lightin
g
IMPACT273
Information for specifi ers
2 models: Impact 29 and Impact 41
IP67
IK10
Class I
Stainless steel body equipped with 2 cable glands Ø 13mm
Cast aluminium cover
Thermally toughened fl at glass
Refl ectors in polished, anodised aluminium: asymmetrical intensive, circular
symmetrical, circular asymmetrical
Optional louvre for circular refl ector
Integrated control gear
Galvanised steel insetting box
Fastened in the ground by screws in an insetting box
Insetting box must be installed in ground with a drainage system
Resists light vehicles at 20 km/h
FinishCover polyester powder coated
Sources
Model HPS MH
Impact 29 70W (E27) 70W (E27)
Impact 41 100W (E40) 100W (E40)
150W (E40) 150W (E40)
250W (E40) 250W (E40)
Refl ectors
Polished, anodised aluminium
Impact 29
Circular Symmetrical (CS) or Asymmetrical
(CA)
Asymmetrical Intensive (AI) for source MH
70W (G12)
Impact 41
Circular Symmetrical (CS) or Asymmetrical
(CA)
Asymmetrical Intensive (AI) for source MH
150W (G12)
Maintenance
Removing the cover gives access to the
lamp and the electrical control gear
Asymmetrical Circular Asymmetrical Circular Symmetrical
2752727227272727272727272727272727227272227272722272727272727277272227222227222227227772227777727772772727277727222727222727272727777272727227277772722727272727272727272772777277722272727727777772222227277272727272222722272772727272727222277727755555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555555
Standalone Lighting
Image RangeLumière RangeLuminairesLED LuminairesColumns and bollards
Wooden range Floodlights andbuilt-in lightingStandalone LightingSpecialitiesTechnical annex
277
Standalone Lighting
Contents
Standalone Lighting // p. 278
Sungate // p. 280
Sunpole // p. 282
Helisol // p. 284
From principles to solutions
There will be almost 10 billion humans on Earth by
2100 and energy consumption will exceed the pla-
net’s renewal capacities.
Seen from this point of view, urban lighting is signi-
fi cant consumer of energy, with immediate impacts
in terms of budgets and, indirectly, in environmental
terms.
With these issues in mind, ECLATEC has in particu-
lar striven to design optimised standalone lighting
solutions.
The approach
Many technical approaches, in what is as yet only an
emerging market, remain experimental in nature.
However, ECLATEC is already providing an industrial
response. Its approach, using an immediate diagno-
sis tool (LOL software) and modular solutions, aims
to provide a solution that can be used in a majority
of situations.
LOL diagnosis tool
Faced with the huge number of different cases,
ECLATEC has created a piece of software – LOL.
This enables us, from input data such as operating
time
and power required or geographical exposure, to
defi ne realistic solutions and the assess the most
effi cient design confi guration required.
Standalone LightingSustainable product development is integrated into every part of our business to solve ecological issues that are vital to not only us, but our successive generations & the pla-net’s future.
GENERAL Standalone Lighting
Installation of Ludic luminaires.
Place de l’Arbennoise. Lille
2005
LOL software
The solutions
ECLATEC’s Standalone Lighting offer includes three solutions:
- SUNGATE, a mechanically welded frame, which contains
integrated batteries and a solar power unit to provide lighting,
and a lit information board
- SUNPOLE, a cylindroconical pole, with or without battery
housing, with a solar power unit
- HELISOL, a cylindroconical pole, with or without battery
housing, with a solar power and (horizontal axis) wind power
unit
The dimensioning and orientation of the solar panels are
determined (possibly by the LOL software) according to the
situation.
Generally speaking, wind power serves only as a top-up, as
wind conditions are rarely suffi cient to drive the generator hard
enough.
The choice of luminaires and sources (high effi ciency lamps,
LEDs), coupled with motion sensors, complete the range of
lighting solutions; indeed, when the power is generated by a
solar or wind source, every watt counts.
«Eclairage citoyen®»
-socially responsible lighting
The «Eclairage Citoyen®» concept developed by ECLATEC is
further justifi ed when it is applied to energy-saving systems:
- the right choice of refl ectors and sources and a constant
concern for «right lighting» (optimised photometric studies)
limit energy consumption
- the use of noble materials (aluminium, glass…) allows for a
high level of recycling
- eco-design is an integral part of ECLATEC’s approach to
design and manufacturing
The applications
These are not a substitute for the «traditional» lighting offer, but
a complement, suited to specifi c applications such as:
- school bus pick-up points in diffuse zones
- car-pooling car parks
- waste recycling centres
- cemeteries
- motorway rest areas
- military applications
- residential areas (in certain confi gurations)
- generally, any areas that are away from the mains
GE
NE
RA
LIT
ES
Sta
nd
alo
ne L
ightin
g
Sungate Sunpole Helisol
279
SUNGATE Standalone Lighting
Carrying Frame
Aluminium carrying frame
Polyester powder coating, any RAL colour
available
Optional: PMMA information board
Luminaire
2 types of luminaire:
- Pixel, Pixel LED luminaire
- Elipt 45 luminaire
Solar generator
Consists of polycrystalline solar panels
(nominal unit output 70 Wc) mounted on an
adjustable support
(1 or 2 panels depending on the
dimensioning study)
Batteries
Power stored in maintenance-free gel
batteries (number of batteries according to
dimensioning study)
SUNGATESources
Model LEDs Fluo MH
Pixel adjustable 15W , 30W 20W , 35W
Elipt 45 adjustable 15W , 30W 20W , 35W
Options
Coupled with a motion sensor, astronomical clock, manual
control
Information board lit by LEDs
Maintenance
Battery recycling: 95% recyclable by an approved specialised
organisation (please enquire)
SU
NG
AT
E S
tand
alo
ne L
ightin
g
281
SUNGATE ELIPT
SUNGATE PIXEL
SUNGATE PIXEL
SUNGATE ELIPT
2
4 m
Sungate Elipt fi tting
Luminaire designed by: J-M Wilmotte
Confi guration : single light fi tting
Lighting height: 4 m
Luminaire : Elipt LED, page 212
Mounting : Luminaire mounted onto the
frame by its summit with a Ø ¾” thread
Sungate Elipt fi tting
Luminaire designed by: J-M Wilmotte
Confi guration : single light fi tting
Lighting height: 4 m
Luminaire : Elipt, page 158
Mounting : Luminaire mounting to the
carrying frame by its summit with a Ø ¾”
PDG thread
Sungate Pixel fi tting
Luminaire designed by: STOA consul-
tancy
Confi guration : single light fi tting
Lighting height: 4 m
Luminaire : Pixel, page 148
Mounting : Luminaire side mounted
onto the carrying frame by a specifi c cast
aluminium adaptor piece
Sungate Pixel fi tting
Luminaire designed by: STOA consul-
tancy
Confi guration : single light fi tting
Lighting height: 4 m
Luminaire : Pixel LED, pages 204, 206
Mounting : Luminaire side mounted
onto the carrying frame by a specifi c cast
aluminium adaptor piece
SUNPOLE Standalone Lighting
Carrying Frame
2 solutions :
- Galvanised steel cylindroconical pole with
batteries in an underground chamber (not
supplied)
- Galvanised steel staged base column with
batteries integrated in the column base
Polyester powder coating, any RAL colour
available
Luminaire
This modular system allows the use of any
luminaires that fi t ø 60 mm: Clip 28, Enza
25, Elipt 45, Eclat, Pixel, ...
Brackets
4 types of brackets available:
- Cliptown bracket (500mm)
- Delphi bracket (650mm)
- Pico bracket (500mm)
- Camaro bracket (500mm)
Solar generator
Consists of polycrystalline solar panels
(nominal unit output of 70 Wc) mounted on
an adjustable support (type TS or TH), 1, 2
or 3 panels depending on the dimensioning
study
Batteries
Power stored in maintenance-free gel
batteries (number of batteries according to
application study)
Sources
Model LEDs Fluo MH
Clip 28 - 15W , 30W 20W , 35W
Eclat - 15W , 30W 20W , 35W
Elipt 45 adjustable 15W , 30W 20W , 35W
Enza 25 - 15W , 30W 20W , 35W
Pixel adjustable 15W , 30W 20W , 35W
Options
Coupled with a motion sensor, astronomical clock, manual control
Maintenance
Staged base column version: easy battery change and quick disconnection
thanks to an integrated rack system
Battery recycling: 95% recyclable by an approved specialised organisation
(please enquire)
SUNPOLEH
35W
35W
35W
35W
35W
ol
connection
ganisation
SU
NP
OL
E S
tand
alo
ne L
ightin
g
283
Sunpole Elipt Pico fi tting
Luminaire designed by: J-M Wilmotte
Confi guration : single light fi tting
Recommended height: 4 to 5m
Luminaire : Elipt LED, page 212
Pico bracket : steel
Outreach 500mm Tilt 5°
Luminaire side mounted with a swivel joint
Pole applied bracket
Pole : galvanised steel staged base co-
lumn with batteries integrated in the base
Sunpole Pixel Camaro fi tting
Luminaire designed by: Cabinet Stoa
Confi guration : single light fi tting
Recommended height: 4 to 5m
Luminaire : Pixel LED, pages 204, 206
Camaro bracket : steel
Outreach 500mm Tilt 5°
Side mounted luminaire
Pole applied bracket
Pole : galvanised steel staged base co-
lumn with batteries integrated in the base
SUNPOLE ELIPT PICO
SUNPOLE PIXEL CAMARO
Sunpole Eclat Pico fi tting
Confi guration : single light fi tting
Recommended height: 4 to 5m
Luminaire : Eclat, page 184
Pico bracket : steel
Outreach 500mm Tilt 5°
Side mounted luminaire
Pole applied bracket
Pole : galvanised steel, cylindroconical
Sunpole Clip Delphi fi tting
Luminaire designed by: M. Aurel
Confi guration : single light fi tting
Recommended height: 4 to 5m
Luminaire : Clip, page 178
Delphi bracket : curved steel
Outreach 650mm Tilt 10°
Side mounted luminaire
Pole applied bracket
Pole : galvanised steel staged base co-
lumn with batteries integrated in the base
SUNPOLE CLIP DELPHI
SUNPOLE ECLAT PICO
4,5 m
HELISOL Standalone Lighting
Carrying Frame
2 solutions:
- Galvanised steel cylindroconical pole with
batteries in an underground chamber (not
supplied)
- Galvanised steel staged base column with
batteries integrated in the base
Polyester powder coating, any RAL colour
available
Luminaire
This modular system allows the use of any
luminaires that fi t ø 60mm: Clip 28, Enza
25, Elipt 45, Eclat, Pixel, ...
Brackets
4 types of brackets available:
- Cliptown bracket (500mm)
- Delphi bracket (650mm)
- Pico bracket (500mm)
- Camaro bracket (500mm)
Solar generator
Consists of polycrystalline solar panels
(nominal unit output of 70 Wc) mounted
on an adjustable support (type TH), 1, 2 or
3 panels depending on the dimensioning
study
Wind generator
Generally constitutes a top-up source
alongside the solar generator.
Horizontal wind generator
Output 400W at 12.5m.s-1
Starting speed: 2m.s-1
Output independent of wind direction
Safety system triggers at 22 ms-1
Sources
Model LEDs Fluo MH
Clip 28 - 15W , 30W 20W , 35W
Eclat - 15W , 30W 20W , 35W
Elipt 45 adjustable 15W , 30W 20W , 35W
Enza 25 - 15W , 30W 20W , 35W
Pixel adjustable 15W , 30W 20W , 35W
Batteries
Power stored in maintenance-free gel batteries
(number of batteries according to dimensioning
study)
Options
Coupled with a motion sensor, astronomical
clock, manual control
HELISOL
Maintenance
Easy battery change and quick
disconnection thanks to an
integrated rack system
Annual wind generator service:
- Greasing
- Visual inspection of the condition
of the blades
- Cleaning the blades with soapy
water (a build-up of particles on the
blades can reduce effi ciency)
Battery recycling: 95% recyclable
by an approved specialised
organisation (please enquire)
uick
n
vice:
ondition
soapy
es on the
cy)
yclable
d
e)
HE
LIS
OL
Sta
nd
alo
ne L
ightin
g
285
HELISOL PIXEL CAMARO
HELISOL ENZA DELPHI
HELISOL ECLAT DELPHI
HELISOL ELIPT PICOECLAT DELPHI
2
ELIPT PICO
4,5 m
Helisol Pixel Camaro fi tting
Luminaire designed by: STOA consul-
tancy
Confi guration : single light fi tting
Recommended height: 4 to 5m
Luminaire : Pixel LED, pages 204, 206
Camaro bracket : steel
Outreach 500mm
Tilt 5°
Luminaire side mounted on the bracket
Pole applied bracket
Pole : galvanised steel, cylindroconical
Helisol Elipt Pico fi tting
Luminaire designed by: J-M Wilmotte
Confi guration : single light fi tting
Recommended height: 4 to 5m
Luminaire : Elipt LED, page 212
Pico bracket : steel
Outreach 500mm Tilt 5°
Luminaire side mounted on the bracket
Pole applied bracket
Pole : galvanised steel, cylindroconical
Helisol Eclat Delphi fi tting
Confi guration : single light fi tting
Recommended height: 4 to 5m
Luminaire : Eclat, page 184
Delphi bracket : curved steel
Outreach 650mm Tilt 10°
Luminaire side mounted on the bracket
Pole applied bracket
Pole : galvanised steel staged base co-
lumn with batteries integrated in the base
Helisol Enza Delphi fi tting
Luminaire designed by: M. Aurel
Confi guration : single light fi tting
Recommended height: 4 to 5m
Luminaire : Enza, page 146
Delphi bracket : curved steel
Outreach 650mm
Tilt 10°
Luminaire side mounted on the bracket
Pole applied bracket
Pole : galvanised steel, cylindroconical
ENZA DELPHI
287
Specialities
Image RangeLumière RangeLuminairesLED LuminairesColumns and bollards
Wooden range Floodlights andbuilt-in lightingStandalone LightingSpecialitiesTechnical annex
289
Specialities
Contents
Fastening plates for concrete poles // p. 290
TLS // p. 292
Syrio // p. 293
Eliptec // p. 294
Prioritec // p. 295
Catelux // p. 296
Domino technology // p. 297
Decorative trims // p. 298
Luminous tips, Aluminium tips // p. 299
Multibox technology // p. 300
FASTENING PLATES FOR CONCRETE POLES Special items
Information for specifi ers
Integrated bracket-fastening plate for
concrete poles drilled Ø 18mm or wall
mounting
Galvanised steel bracket
Outreach 800mm, 1000mm and 1200mm
Tilts: 5° and 10°
For side mounting of the luminaire
Plate fastening: 2 holes Ø 16mm, distance
between centres 280mm and tie-rods Ø
14mm
Information for specifi ers
Luminaire holder with integrated control gear
for concrete poles drilled Ø 18mm or wall
mounting
Galvanised steel bracket
Housing for connection box
Outreach 800mm, 1000mm and 1200mm
Tilts: 5° and 10°
For side mounting
Plate fastening: 2 holes Ø 16mm, distance
between centres 350mm and tie-rods Ø
14mm
PREFIX SUFFIX
1300
1000
SUFFIX
325
350
1400
1000
PREFIX
360
280
Information for specifi ers
Galvanised steel bracket with fastening
plate
Outreach: 800mm and 1000mm
Tilts: 10° and 15°
For side mounting of the luminaire
Plate fastening: 2 holes Ø 16mm, distance
between centres 140mm, or by sheet
Information for specifi ers
For all street lighting luminaires, suitable to
all types of supports: wooden, concrete
poles, walls, etc…
Azimuth adjustment
Galvanised steel tube bracket
Two galvanised cast bracelets, with
fastening hole Ø 17mm
Tilts: 10° and 15°
APPLIFIX UNIFIX
FA
ST
EN
ING
PL
AT
ES
FO
R C
ON
CR
ET
E P
OL
ES
Sp
ecia
l item
s
291
1000
UNIFIX
1000
600
r=225
140
1000
APPLIFIX
230
Ø 16
Ø 16
TLS Special items
TLSInformation for specifi ers
5 sizes: TLS 5, TLS 8, TLS 10, TLS 13 and TLS 16
IP 66
IK 08
Class I
Extruded aluminium body closed at both ends by a sealed cast
aluminium end plate
Reß ectors in polished, anodised aluminium: deÞ nition according to
tunnel conÞ guration
Thermally toughened ß at glass
Integrated control gear mounted pre-wired on a removable,
disconnectable tray
Fastened by aluminium or stainless steel stirrup brackets or Þ ttings
Luminaire opens without tools
Optional: 3 or 5 blade louvers
Finish:
- aluminium section: anodised, colourless
- end plates: polyester powder coating, black RAL 9005
Sources
Model HPS MH Fluorescent tube FLUOCOMPACT
TLS 5 100W (E40) 100W (E40) / /
150W (E40) 100W (E40) / /
TLS 8 250W (E40) 150W (E40) / /
/ 250W (E40) / /
TLS 10 400W (E40) 400W (E40) / 2 x 55W (2G11)
TLS 13 2 x 250W (E40) 2 x 250W (E40) 36W TF (G13) /
TLS 16 2 x 400W (E40) 2 x 400W (E40) 58W TF (G13) /
A
A B
281
186B
TLS 5 480 500
780 800
980 1000
1330 1350
1630 1650
TLS 8
TLS 10
TLS 13
TLS 16
TLS - 2x55W
50
100
150
200
250
300
22.5° 45° 67.5° 90°
C90 - C270
C0 - C180
67.5° 45° 22.5° 0°90°
Weight - Windage(depending on model)
TLS: 10 to 15 kg - 0.13 to 0.22m²
Mechanical interfaces
Top mounted or suspended on aluminium
or stainless steel, Þ xed or adjustable
Þ ttings
IP rating
Silicone pneumatic gasket
Photometric distributions Typical photometric data
SY
RIO
Sp
ecia
l item
s
Information for specifi ers
IP 66
IK 08
Class I
Injected aluminium body
Polished, anodised aluminium reß ector, for counter beam (CB)
tunnel lighting
Thermally toughened ß at glass
Integrated control gear mounted pre-wired on a removable tray
Mounted on adjustable Þ ttings
Luminaire opens without tools
Opening the glass gives access to the lamp and the control gear
Optional: louvre
Finish: polyester powder coating, black RAL 9005
Sources
Model HPS MH
Syrio 100W (E40) 100W (E40)
150W (E40) 150W (E40)
250W (E40) 250W (E40)
400W (E40) 400W (E40)
600W (E40) /
SYRIO
548
SYRIO
455
205
Syrio - SHP 400W
200
400
600
800
1000
22.5° 45° 67.5° 90°
C90 - C270
C0 - C180
67.5° 45° 22.5° 0°90°
Weight - Windage
Syrio: 20kg - 0.11m² (horizontal windage) -
0.32m² (vertical windage)
Mechanical interfaces
Top mounted or suspended on adjustable
Þ ttings
IP rating
Extruded silicone gasket
Photometric distributions Typical photometric data
293
ELIPTEC Special items
Information for specifi ers
IP 66
IK 08
Class I and II
Injected cast aluminium body
Crimped spun aluminium dome
Spun aluminium tapered bowl holder
Thermally toughened sealed glass bowl
Reß ector-projector in polished, anodised aluminium
Louver integrated in bowl holder
Integrated control gear (max. 250W)
Separate control gear for 400W in a wall-mounted box or in the
pole base
Luminaire opens without tools
Polyester powder coating, any RAL colour available
Sources
Model HPS MH
Eliptec 150W (E40) 150W (E40)
250W (E40) 250W (E40)
400W (E40) 400W (E40)
Weight - Windage (with control gear)
Eliptec: 11.5kg - 0.09m² - 250W
ELIPTEC
Mechanical interfaces
Eliptec Side entry with swivel joint LR, ¯3/4Ó
PDG thread
Fastening consisting of 2 half-swivel joints, angle
markings
Tilts from 0 to 45¡ by 5¡ steps
IP rating
Degree of protection IP 66 according to standard
EN 60529
High temperature silicone gaskets
Maintenance
Luminaire opens without tools by means of 3
quarter turn wing fasteners
Access to lamp and control gear by hinging
down the tray
446
ELIPTEC
720
Information for specifi ers
IP 66
IK 08
Class I and II
Injected aluminium body
Spun aluminium dome
Spun aluminium bowl holder
Thermally toughened sealed glass bowl
Reß ector in polished, anodised aluminium
Aluminium louvre painted black Þ xed onto the reß ector
Integrated control gear (max. 250W)
Separate control gear for 400W in a wall-mounted box or in the
pole base
Luminaire opens without tools
Polyester powder coating, any RAL colour available
Sources
Model HPS MH
Prioritec 150W (E40) 150W (E40)
250W (E40) 250W (E40)
400W (E40) 400W (E40)
Weight - Windage (with control gear)
Prioritec: 15kg - 0.11m² - 250W
Mechanical interfaces
Prioritec side entry with swivel joint LR, ¯
¾Ó PDG thread
Fastening consists of 2 half-swivel joints,
raised angle markings, tilt from 0 to 45¡ by
5¡ steps
IP rating
Degree of protection IP 66 according to
standard EN 60529
High temperature silicone gaskets
Maintenance
Access to components when opening the
luminaire, by releasing the levers integrated
in the luminaire tray
PR
IOR
ITE
C S
pecial item
s
PRIORITEC
433
PRIORITEC
715
295
Information for specifi ers
Catelux Þ ts any luminaire suitable for summit mounting
(Metro, Indice, Elipt, Chorus,... )
IP66
Mechanical fastening and quick electrical connection
Injected aluminium body
Plug-in disconnecting system for power cut off of the parts
Fastens onto mechanical cable 5 to 14mm
Elevation and azimuth adjustment
Polyester powder coating, any RAL colour available
Mechanical interfaces
Cable locked by 2 M8 screws
Direction of luminaire locked by 1 M8 screw
Swivel joint for horizontal adjustment
IP rating
Degree of protection IP 66 according to standard EN 60529
Extruded silicone gasket. 2 cable glands with anchoring devices
Maintenance
Removable cover Þ xed by 1 screw
Plug-in disconnecting system for power cut off of the
parts
Power cable connected to a terminal block
CATELUX
¯ 27 PDG
245
334
CATELUX
80
CATELUX Special items
DO
MIN
O S
pecia
l item
s
Optical system
Domino provides optimum lighting in
urban settings
The asymmetrical reß ector can be turned
through 360¡ for optical modularity
At night, its sandblasted, ribbed glass
diffuser guarantees visual comfort without
glare
In the daytime, the sandblasted bowl
masks the source and contributes to the
general attractiveness of the luminaire
Construction
The DOMINO module includes:
- a spun aluminium holder integrating the
electrical equipment
- an anodised aluminium reß ector
providing extensive light distribution
- a sandblasted, ribbed blown glass
diffuser
- a galvanised steel cover with a trapdoor
for access to the source, for easy
maintenance
Sources
Metal halide lamps with ceramic burners,
G12 base, powers 35W, 70W, 100W and
150W
Lamp Þ tted in the vertical position
Ferromagnetic or electronic ballast
Class I - Class II
Eco design
Complies with the European RoHS
directive
Eligible for the Energy EfÞ ciency CertiÞ cate
with ULOR < 20%
High recyclability rate
Confi gurations
The DOMINO adapts, as an option, onto
Idylle (cf. page 172) and Elyxe (cf. page
150) luminaires
DOMINO297
DECORATIVE TRIMS Special items
MURENAtrim
Information for specifi ers
Cast aluminium trim
Adapts speciÞ cally to Murena luminaire
Fitting on bracket ¯ 60mm, straight
section 400mm minimum
Held in place by pressure screw
TSANAtrim
Information for specifi ers
Information for speciÞ ers
Cast aluminium trim
Fitting on bracket ¯ 60mm
FRIDAYtrim
Information for specifi ers
Cast aluminium trim
Fits Elipt type swivel joint
Fitting on bracket ¯ 60mm, straight
section 400mm minimum
Held in place by pressure screw
CITYtrim
Information for specifi ers
Cast aluminium trim
Adapts speciÞ cally to Enza luminaire
Fitting on bracket ¯ 60mm, straight
section 400mm minimum.
Held in place by pressure screw
Murena trim
City trim
Friday trim
Tsana trim
p
Murena trim
City trim
Friday trim
Tsana trim
LU
MIN
OU
S T
IPS
, AL
UM
INIU
M T
IPS
Sp
ecia
l item
s
187
287
¯ 60
¯ 60
¯ 60
387
88
8
187
¯ 60
¯ 48
¯ 44
¯ 66
¯ 76
¯ 53
Luminous TipsDescription
4 models available
IP67
Body made of corrosion-resistant aluminium alloy 5083
Translucent PMMA Þ tting screwed onto the body
1 LED power 1W at 350mA Þ tted on a printed circuit (white, blue, red,
green, orange)
Power supply 230V
Supplied with cable 13m / 1.5mm²
Weight / Windage
1kg to 1.4kg depending on model - 0.012m²
Mechanical interfaces
Fits :
- pole ¯ 76mm
- pole ¯ 60mm steel / aluminium
- bracket ¯ 60mm steel / aluminium
Maintenance
Unscrew the translucent Þ tting
Access to the LED and the power unit
IP rating
O ring. Cable gland with anchoring device
Aluminium TipsDescription
4 models available
Cast aluminium body
Penetrating mounting on the pole
Fastened by stainless steel screws depending
on installation
Polyester powder coating
800
152
200
Ø 76
750
150
Ø 60
600
150
Ø 60
Ø 40 Ø 42
Ø 66 Ø 66
800
152
200
Ø 89
299
Multibox Special items
Multibox® is available for ENZA and PIXEL luminaires
Multibox® multi-purpose electrical control gear module
4 compatible models: Enza 25, Enza 35, Pixel PM, Pixel GM
Get the best out of the new generation of sources
Adapt to every lighting project
Optimise maintenance operations
BeneÞ t from upgradeable solutions
Maintain performances
Choose the right power and lighting management system
With this product, Eclatec has developed a clever solution combining high
technology, simplicity and safety
Multibox® offers numerous advantages
Multibox¨ includes a wide variety of electrical equipment
- ferromagnetic ballasts
- electronic ballasts
- dimmer systems
- dual power systems with or without pilot-wire
- ballast communicating by radio-frequency
- ballast communicating by LonWorks protocol
Multibox®
p
Mu
ltibo
x Sp
ecia
l item
s
Multibox® optimum safety
- Tipping up the Multibox¨ disconnects the luminaire electri-
cally
- A LED indicates that the mains power is on
- It is possible to work with the power on as the live parts are
inaccessible without tools
Multibox® simplifi ed connections
The use of printed circuits with clip-on terminals ensures:
- no risk of error when wiring
- risk of wrong contacts is reduced
- different control gear conÞ gurations possibilities
- a more reliable system
The controlled operating temperature of the Multibox¨
optimises the operating life of the electronic components
Multibox® an upgradeable solution
Multibox¨ means that it possible to swap from an electronic
ballast solution to a dual power system without changing the
luminaire, simply by replacing the control gear module
Multibox® is also a range of other equipment that can be integrated on site
Equipment that can be integrated on site:
- telemanagement modules
- photoelectric cells
- fuses
Power-on LED
301
303
Technical Annex
Image RangeLumière RangeLuminairesLED LuminairesColumns and bollards
Wooden range Floodlights andbuilt-in lightingStandalone LightingSpecialitiesTechnical Annex
305
Technical Annex
Contents
Design and laboratory tests // p. 306
Reference regulations and standards // p. 307
Standard 13201 // p. 308
Interpretation of photometric curves // p. 309
Lamp and luminaire compatibility // p. 310
Electrical control gear // p. 312
Standard EN 40, wind speed zones // p. 313
Mechanical interfaces // p. 314
Technical and mechanical characteristics of luminaires // p. 316
Eco-design and recycling // p. 317
Mechanical strength
Each product and each component is subjected to
a batch of tests from IK - impact strength to
vibration tests, conÞ rming the mechanical strength
estimated in the design phase.
Temperature resistance
Temperature directly impacts the operating life of the
electrical equipment.
The choice of the electrical components and their
arrangement are therefore essential.
The luminairesÕ temperature resistance is checked in
line with standard EN 60598.
IP rating
ECLATEC has always designed luminaires that are
durably water and dust-tight.
Almost all ECLATEC luminaires are classed IP 66,
which means that the integrity of the components in
the luminaire are protected.
This integrity is due to the general design of the
parts, but also to the frequent use of silicone
pneumatic gaskets and activated carbon Þ lters for
the breathing system.
Laboratory tests check these ingress protection
levels.
Electrical equipment
Free of any commitment to manufacturers,
ECLATEC uses the electrical and electronic
equipment it needs (ballast, ignitors, capacitors,
lamps, power units,É), always of high quality,
compliant with standards and approved by the
ECLATEC laboratory.
Intellectual property and Protection of trademarks and designs
ECLATEC retains all the intellectual property rights
arising out of its projects, studies and documents of
any nature, as this is elaborated upon later.
Our technology and know-how, whether patented
or not, as well as all the industrial and intellectual
property rights relating to the products and services,
remain our exclusive property. Any licensed or
commissioned usage is granted only a non-exclusive
right to use the products.
All the designs and trademarks relating to luminaires
and assemblies are the subject of Industrial and
Intellectual Property registrations with the INPI
(French National Institute of Industrial Property).
The company is certiÞ ed ISO 9001:2008.
It guarantees to all its clients the quality of the
products and services supplied.
Design and laboratory tests
ECLATEC devotes considerable resources to the design and improvement of its products.
This approach was recognised in 2009 when the company was awarded the INPI innovation trophy.
Throughout the design phase, detailed tests are conducted by the INPI laboratory validating the photometric, mechanical and
electrical properties of ECLATECÕs luminaires.
TECHNICAL ANNEX Design and laboratory tests
General luminaire conception
- NF EN 60598 : luminaires
- NF EN 60598-1 : luminaires : general requirements and rules regarding tests
- NF EN 60598-2-3 : particular requirements : luminaires for road and street lighting
Dust and humidity protection (IP)
- EN 60529 (see details p. 316)
Impact resistance (IK)
- EN 62262 (see details p. 316)
Electromagnetic compatibility and CE marking
- EN 55015: emission testing of luminaires
- EN 61000: electromagnetic compatibility (EMC)
Photometric testing and performances
- EN 13032-1 and EN 13032-2: Photometrical luminaire testing
- EN 13201: photometric performances required by installation conÞ guration
Electrical design
- UTE C 15-100: low voltage electrical installations
-NF C 17-200: Street lighting installations - Rules
- UTE Guide C 17-205: Street lighting installations - Determination of conductor sections and choice of
protection devices
Conception and marking of poles, brackets and supports
- EN 40: lighting supports and columns
- EN 40-1: deÞ nitions and terms
- EN 40-2: dimensions and tolerances
- EN 40-3.1: Conception and veriÞ cation - speciÞ cations for characteristic loads
- EN 40-3.3: Conception and veriÞ cation - veriÞ cation by calculation
- EN 40-5: requirements for steel lighting columns
- EN ISO 1461: hot dip galvanisation
Reference regulations and standards
ECLATEC pays particular attention to compliance with all the regulations and recommendations applicable to its products.
The main references are :
TE
CH
NIC
AL
AN
NE
X R
efe
rence re
gula
tions a
nd
sta
nd
ard
s
307
TECHNICAL ANNEX Standard 13201
Standard EN 13201 and photometric studies
This standard consists of 4 coherent parts:
- Part 1 deÞ nes lighting classes
- Part 2 allows the determination of performance
requirements
- Part 3 describes how to calculate performance
- Part 4 explains the methods of measuring photo-
metric performance.
Defi nition of needs and imposed performances
The category of roadway dictates the photometric
performance required, in quantitative terms (ave-
rage illumination, average luminance) and qualitative
terms (uniformity, glare).
Maintenance factor
The maintenance factor expresses the loss of maxi-
mum luminous ß ux during the operating life of the
installation. It depends in particular on the technical
characteristics of the luminaire (IP, bowl material),
the choice of lamp (type, supplier, electrical power
supply...) and frequency of maintenance.
This factor must be taken into account in order to
guarantee performance over time.
Choice of source, location, adjustment
On these bases, the photometric study will optimise
the location of the luminaires and the choice of opti-
cal systems, sources and photometric adjustments.
Standard 13201
Dry road
Motor vehicles
Average
luminance
General luminance
uniformity
Longitudinal lumi-
nance uniformity
Glare TI
Lighting class cd/m² % % %
ME 1 2,00 40 70 10
ME 2 1,50 40 70 10
ME 3a 1,00 40 70 15
ME 3b 1,00 40 60 15
ME 3c 1,00 40 50 15
ME 4a 0,75 40 60 15
ME 4b 0,75 40 50 15
ME 5 0,50 35 40 15
ME 6 0,30 35 40 15
Dry road Ð Motor
vehicles and other
road users
Average horizontal
illumination
Illumination
uniformity
Lighting class Lux %
CE0 20 40
CE1 15 40
CE2 10 40
CE3 10 40
CE4 10 40
CE5 7,5 40
ECLATECÕs photometric studies follow the recommendations of standard EN 13201.
TE
CH
NIC
AL
AN
NE
X In
terp
reta
tion o
f photo
metric
curv
es
Intensity curves describe the luminous intensity
distribution of the luminaire. Luminous intensity is
the quantity of light emitted in one direction. It is
expressed in candelas. By convention, these curves
refer to a ß ux of 1000 lumens.
The utilisation factor is deÞ ned as the ratio of the
ß ux received by a reference surface over the ß ux
emitted by the light sources assigned to the lighting of
that surface.
The utilisation factor curves presented allow a reading
of the utilisation factor for a part of the roadway (right
part of the curve) or the pavement (left part of the
curve).
Interpretation of photometric curves
Imax = 367 cd/klm
Elipt - Optitec® 27 - MH 150W E40
0%
10%
20%
49,1%
70%
l/h 1.5-1 -0.5 0 0.5 1
Luminaire tilted 10°
- 90 ° 90 °
0 °- 45 ° 45 °400
0
cd/klm
C0 - C180C90 - C270
Example
Assembly height: 10m
Road width: 8m
Light point set back: 1m
The utilisation factor for the roadway will be the diffe-
rence between the utilisation factor value for a value
of 0.9 (that is to say 8m+1m divided by the height of
10m) and the utilisation factor for a value of 0.1m (set-
back/height).
This utilisation factor allows to obtain the average
illumination by calculating:
lamp = lamp ß ux, u = utilisation factor
NB : These curves can be used as a fi rst approach, as a criterion for selecting a luminaire. The conformity of a solution requires, however, a full verifi cation by ECLATEC’s Lighting Consultancy service.
Em=lamp x u
Width x Spacing
309
TECHNICAL ANNEX Lamp and luminaire compatibility
Table of lampsLuminaires Bowl diffuser HPS - Tub. MH - Tub. Ceramic
metal halide G12Cosmo
Abys / / 150W /
Airport Junior VP 150W (1) 150W (1) / /
Airport Senior VP 400W (1) 400W (1) / /
Alex / 35W (2) 100W /
Amarante / / 100W 90W
Astris As1 VP 600W 400W / /
Astris As2 VP 1000W 1000W / /
Astris As3 VP 2 x 600W 2 x 400W / /
Atlante / / 100W /
Auris 100W 100W / /
Alubois bollard 70W 70W / /
Totem bollard 70W 70W / /
Transfert bollard 70W 70W / /
Cadix bollard 70W 70W / /
Btx 153 VP 70W 70W / /
Btx 173 VP 250W 250W / 140W
Btx 183 VP 400W 400W / 140W
Chorus 45 150W 150W / 140W
Chorus 55 250W 250W / 140W
Climat 55 VP 70W 70W / /
Climat 65 VP 150W 150W / /
Climat 75 VP 250W 250W / /
Clip 28 VP 150W 100W 150W 140W
VB 150W 150W 150W 140W
MBC 150W 100W 150W 140W
PBC 150W 150W 150W 140W
Clip 28 Eclapak VP 150W 100W 150W 140W
VB 150W 150W 150W 140W
MBC 150W 100W 150W 140W
PBC 150W 150W 150W 140W
Clip 34 VP 400W 400W / 140W
VB 400W 400W / 140W
MBC 150W 150W / 140W
PBC 250W 250W / 140W
Clip 34 Eclapak VP 400W 400W / 140W
VB 400W 400W / 140W
MBC 150W 150W / 140W
PBC 250W 250W / 140W
Duplex VP 250W 250W 70W (2) /
Eclat 250W 250W / 140W
Elipt 45 150W 150W 150W 140W
Elipt 55 250W 250W / 140W
Elipt 65 400W 400W / /
Eliptec 400W 400W / /
Elyxe Lx-R 150W 150W 150W 140W
Elyxe Lx-C 150W 150W 150W 140W
Elyxe Lx-A 70W 70W 150W 140W
Elyxe Lx-P 150W 150W / 140W
Elyxe Lx-I / / 150W 140W
The powers indicated are maximum powers
TE
CH
NIC
AL
AN
NE
X L
am
p a
nd
lum
inaire
com
patib
ility
Luminaires Bowl diffuser HPS - Tub. MH - Tub. Ceramic metal halide G12
Cosmo
Elyxe Lx-D / / 150W /
Enza 25 150W 150W 150W 140W
Enza 35 400W 400W / 140W
Forvil 150W 150W / /
Garig 70W 70W / /
Gloria 100W 100W / /
Idylle P 100W 100W / 90W
Idylle R 100W 100W 35W 90W
Idylle D / / 150W /
Impact 29 VP 70W 70W / /
Impact 41 VP 250W 250W / /
Indice 500 150W 150W 150W 140W
Indice 620 Verre 400W 250W / 140W
G 250W 250W / 140W
Autre 150W 150W / 140W
Luna VP 100W 100W / 90W
Metro 45 Verre 100W 100W / /
Metro 55 Verre 250W 250W / 140W
Metro 65 MBC 250W 250W / 140W
PBC 400W 400W / /
Murena VP 400W 250W / 140W
Nantua Pm / Cytise Pm VP 150W 150W / 140W
Nantua Gm / Cytise Gm VP 400W 400W / 140W
Oblic VP / / 150W /
Orastar 250W 250W / /
Orient 100W 100W / /
Orion Junior VP 150W (1) 150W (1) / /
Orion Senior VP 400W 400W / /
Paléo VP 400W 400W / 140W
VB 400W 400W / 140W
MBC 150W 150W / 140W
PBC 250W 250W / 140W
Panthéon 1 VP 400W (1) 400W (1) 250W /
Panthéon 2 VP 150W (1) 150W (1) 150W /
Pixel Pm VP 70W 70W 150W 140W
Pixel Gm VP 250W 250W 250W 140W
Prioritec VP 400W 400W / /
Quadrilux Cylindro VP 1000W 1000W / /
Quadrilux Road VP 600W 400W / /
Quadrilux Asymmetrical VP 1000W 1000W / /
Refl ex VP / / 150W 140W
Rochelongue MT 250W 250W / 140W
Script / / 70W /
Siléo Pm VP 70W 70W 150W 140W
Siléo Gm Verre 400W 400W / /
Stratus C PC 150W 150W / /
Stratus R PC 70W 70W / 140W
Syrio VP 600W 400W / /
TLS VP 2 x 400W 2 x 400W / /
Yria VP / / 150W /
(1) = double ended lamp // (2) = secondary source
Key :
HPS - Tub.
Tubular High Pressure Sodium
MH - Tub.
Tubular Metal Halide
VP = Flat glass
MT = PMMA truncated cone shaped
PT = Polycarbonate Truncated cone shaped
MBC = Curved clear PMMA
PC = Polycarbonate
PBC = Curved clear polycarbonate
VB = Curved glass
G = tear drop shaped bowl diffuser (any
fi nish)
311
TECHNICAL ANNEX Electrical control gear
Street lighting uses high effi ciency lamps, such as discharge
lamps (high pressure sodium, metal halide, …), which are
incompatible with direct mains power supply.
Ferromagnetic control gear
A Control gear plate traditionally consists of three
components :
- the ignitor, which sends for a very short time (a few micro-
seconds) a very high voltage to the lamp so as to initiate the
electric arc between the electrodes,
- the ballast, a coil which stabilises the discharge. Its impe-
dance is adjusted to the lamp,
- the capacitor, which compensates for the dephasing of the
current and the voltage
Electronic power supply units
For the last few years, electronic power supply units have
grouped these three components together in a single module.
The main advantage of this technology is that it supplies the
lamp regardless of the fl uctuations in the mains voltage, so
that the lamp’s fl ux remains constant.
Power reduction (dimming)
The level of illumination may be reduced during periods of the
night where there is less traffi c. Various dual power systems
are offered by ECLATEC:
- in the case of ferromagnetic ballasts, the solution consists of
using a ballast with two coils whose impedances correspond
to the two power levels required,
- in the case of electronic ballasts, the latter manage two
power levels and only require a control system.
The dimming system can be controlled by a pilot wire connec-
ted to the cabinet. To avoid the drawbacks of this technology,
ECLATEC recommends the use of self-contained relays, inte-
grated in the luminaire. These relays include an astronomical
clock that controls the lighting at pre-defi ned times of the day.
On the basis of a reduction in the power 6 hours a night, it is
possible to save from 20 to 25% energy.
For low nominal powers, one economical solution recom-
mended consists of using a relay without an astronomical
clock, determining the mid-point of the night and reducing/
increasing the power. The only disadvantage of this solution
is the slippage in the hours of reduced operation by a few
minutes over the year as indicated in the diagram below.
ECLATEC also integrates power variation devices at the
light point as well as communication nodes linked to remote
lighting management systems.
In these situations, ECLATEC validates the integration of the
function in the luminaire by testing its lodgeability and tem-
perature resistance, although performance and reliability are
actually the responsibility of the different manufacturers.
Electrical control gear
23h00
23h15
23h30
23h45
00h00
00h15
00h30
00h45
01h00
01h15
01h30
No
vem
ber
Décem
ber
Octo
ber
Sep
tem
ber
Aug
ust
July
June
May
Ap
ril
Marc
h
Feb
ruary
January
Midnight
Spring SpringSummer
max.
Light sources are constantly changing, as the best compromise is sought between luminous effi ciency (ratio between luminous
fl ux in lumens and power consumption in watts), visual comfort (colour temperature, colour rendering index) and cost (lamp
price and operating life).
TE
CH
NIC
AL
AN
NE
X S
tand
ard
EN
40 a
nd
win
d z
ones
European standard EN 40, imposing the CE marking
of lighting columns and applicable in France since 1
February 2005, was revised in March 2008.
It concerns:
- straight poles with luminaires up to a height of 20m,
- poles with brackets with luminaires up to a height of
18m,
- straight poles with fl oodlights with a height of less
than 15m.
ECLATEC is certifi ed by the CTICM (www.cticm.
com) and therefore authorised to affi x CE marking on:
- straight galvanised steel poles:
certifi cate No. 1166 - CPD - 0059
- galvanised steel poles with brackets:
certifi cate No. 1166 - CPD - 0060
ECLATEC is authorised to fabricate its poles and
supports by calculation of resistance, in accordance
with standard EN 40:
- for the 5 wind speed zones (24, 26, 28, 30 and 34
m/s)
- for the 2 categories of terrain (1 coastal and other
exposed zones - 2 cultivated land)
Note: The calculations with category 3 and 4 terrains
are not used.
NB: when consulting us and placing orders, please
specify the wind zone and category of terrain or the
town where the assemblies will be installed.
Without any other indications, the calculations for
poles with adjustable brackets are done for the least
favourable case, that is to say with the access door
placed on the side.
Note: on request, we are able to do calculations with
the access door in a favourable position, that is to say
positioned underneath or behind the bracket.
Excess loads
Lighting columns are calculated by ECLATEC to resist
a specifi c load in conditions of location at the time of
the order. Any modifi cation of the structure or addition
on the pole of banners, lighting decorations, fl ower
baskets or any other accessory must be submitted to
ECLATEC for verifi cation in advance.
Admissible surfaces and conventional declared values
The conventional declared value is a characteristic of
the support calculated on the basis of conventional
parameters. This is an indicative value. It does not
allow the correct resistance of an assembly for a
given site to be checked.
Limits of use are defi ned by the admissible surfaces
at the top of the pole according to the wind speed
zone and category of terrain. They take account of
the confi guration of the product to be installed.
CE marking of assemblies
When installing its equipment, the client must ensure
that the products received are certifi ed and CE
marked. The assembly of CE marked products of
different origins (poles, brackets) may, not under any
circumstances, be considered as a CE assembly.
Conditions of installation :
Standard EN 40 and wind zones
Guadeloupe
Martinique
Wind mapSource : DTU P06-002 - February 2009
Reunion
Guyane
WIND ZONES12
43
5
5554
88
67
6870
2158
71 39
25
90
74016942
7338
26
83
068413
2B
07
30
34
11
66
4812
46
8182
31
09
32
6564
40
3347
24
1617
1915 43
63
0323
87
867985
4944
53352229
56
50
61
14 27
7660
80
6259
02 08
51
10
895245
2872
4137
1836
57
2A
05
04
ANTI-SHRINKAGE GROUT
DRAIN
4 Ø
max
i
Mounting on stilts
ØGround
CONCRETE BLOCK CONCRETE BLOCK CONCRETE BLOCK
DRAIN
Standard installation
DRAIN
Semi-rigid system
GroundGround
313
TECHNICAL ANNEX Mechanical interfaces Luminaires
MECHANICAL INTERFACES | luminaires
SINDE ENTRY MOUNTINGS
CATENARY FASTENINGS
LR : Side entry with swivel joint
for luminaires Orastar, Oratec, Forvil
AR
… to be welded
… to be welded
LR 27G
LReL : Side entry swivel joint with sleeve
for luminaires Elipt, Métro, Chorus
ARPole Ø 60.3
Steel,
thickness 2,9
Tube Ø 60
Aluminium,
thickness 5
LReL acier
LReL alu
TOP / BITOP
for luminaires Elipt, Chorus
TP BTPSRe : Suspended with swivel joint
for luminaire Métro
27GLRe
Tube Ø 60
Aluminium,
thickness 5
Tube Ø 60.3
Steel, thickness 3,2
SReL : Suspended swivel joint with sleeve
for Stratus, Métro
Mât Ø 60.3
Steel,
thickness 2,9
Tube Ø 60
Aluminium,
thickness 5
LReL acier
LReL alu
SR : Suspended swivel joint
for luminaires Orastar, Oratec, Forvil
LR 27G
Tube Ø 60
Aluminium,
thickness 5
Tube Ø 60.3
Steel, thickness 3,2
SC : Catenary suspension system
for luminaire STRATUS
SC : Catenary suspension system
for luminaires Orastar, Oratec, Forvil,
Chorus, Elipt, Métro
SUSPENDED FASTENINGS
COLLAR CLAMP MOUNTING
LRe : Side entry with swivel joint
for luminaires Elipt, Chorus
AR
Tube Ø 60
Aluminium,
thickness 5
Tube Ø 60.3
Steel, thickness 2,9
Steel, thickness 3,2
LRe 27G
… souder
… souder
LL : Side entry with sleeve,
for luminaires Orastar, Oratec, Forvil
LL steel LL aluminium
LLe : Side entry with sleeve,
for luminaires Elipt, Chorus
LLe aluminiumLLe steel
SM : Suspended with thread
for luminaires Orastar, Oratec, Forvil
Collar clamp mounting
for luminaire LUNA
CLIMAT MOUNTING
SM 27G
Tube Ø 60.3
Steel, thickness 2,9
Steel, thickness 3,2
Tube Ø 60
Aluminium,
thickness 5
Ø c
ab
le Ø
5 t
o 1
4m
m±
2
Catenary suspension system
for luminaires Métro, Indice, Elipt, Chorus
TE
CH
NIC
AL
AN
NE
X M
echanic
al in
terfa
ces C
rosses e
t Mâts
MECHANICAL INTERFACES | brackets and poles
Pole Ø 60/62
Ø 60±2
MALE BRACKET FASTENING
for steel bracket
POST TOP FASTENING
for aluminium bracket
70
102
90°90°
90°
Pole with indents
90° 90°
90°
320
320
100
100
Ø 76 Ø 89
M10
M10
M10 M10
M10
M10
M10
M10
M10
M10
M10
Ø 12
363
19
Ø 52.5
Ø 44.5
500
Ø 64
19
Ø 48
Ø 12
Ø 77
Ø 12
Ø 60
19
500
100
190
90°90°
90°
Ø 60 - 62
M10
M10
M10
M10
M10
M10
M10
120
Ø63
TOP ELIPT
pole Ø 60/62
TOP ORATEC
pole Ø 60/62
Ø 63±2
100
Ø60±2Ø 60±2
Ø 65Ø 52
25
350Ø 42,4
TOP GRAPHIC
11
0
Ø 90
100
Pole top Ø 90 / 110
Ø100
8 screws
HC M10 x 12
stainless steel
2 rows of 4 M10
indents at 90°
400
50
M10
Ø 112
2x3 M8 120°
102
Ø 72
50
20
Ø 70
100
Ø 90
Ø 90
TOP FASTENINGS
ARCHITEK TYPE SPECIFIC POLE
FASTENING SYSTEM for brackets
Saïan, Vecteur, Noa, Architek, Profil
FASTENING ON SPECIFIC
REFLEX AND OBLIC POLES
PENETRATING FASTENING
for aluminium bracket Emeraude
DUPLEX SPECIFIC POLE
FASTENING SYSTEM
240
276
100
100
90°90°
90°
Pole with indents
Ø 40
Ø 54
Ø 54
pole Ø 60/62
Ø 60±2
315
TECHNICAL ANNEX Electrical and technical characteristics of luminaires
Electrical and technicalcharacteristics of luminaires
Electrical classes – Protection against electric shocks
Class Symbole Protection
Class I
luminaires
Functional insulation connecting the accessible me-
tal parts to a protective conductor (earth)
Class II
luminaires
Insulation of the live parts by reinforced double
insulation. These devices do not have a protective
conductor (earth)
Degree of protection IPXX : according to Standard EN 60529
1st digit
Ingress of solid objects
2nd digit
Ingress of water
IP 0X Not protected IP X0 Not protected
IP 1X Protected against solid
materials larger than 50mm
IP X1 Protected against dripping
water (vertically)
IP 2X Protected against solid
materials larger than 12mm
IP X2 Protected against dripping
water when tilted up to a maximal
of 15°
IP 3X Protected against solid
materials larger than 2.5mm
IP X3 Protected against water rain
fall at a maximum tilt of 60°
IP 4X Protected against solid
materials larger than 1mm
IP X4 Protected against splashing
water
IP 5X Protected against dust IP X5 Protected against water jets
IP 6X Dust-tight IP X6 Protected against sea big
wave
IP X7 Protected against immersion
Mechanical resistance IK code: according to Standard EN 62262
Code IK 06 IK 07 IK 08 IK 09 IK 10
Energy 1 joule 2 joules 5 joules 10 joules 20 joules
Mass 0,5kg 0,5kg 1,7kg 5kg 5kg
Height of drop 200mm 400mm 295mm 200mm 400mm
TE
CH
NIC
AL
AN
NE
X E
co-d
esig
n a
nd
recyclin
g
Eco-design and recycling
Eco-design
A socially responsible concept
The spirit of «Eclairage Citoyen®» (socially
responsible lighting) guides ECLATEC in its approach
to design.
Very early in the process of creating a product,
ECLATEC strives to reduce the nuisance induced
by lighting (ULOR, light pollution), in particular by
the choice of refl ectors and the confi guration of the
luminaire.
ECLATEC’s photometric know-how, its commitment
to «right lighting», through in-depth lighting studies
and optimised combinations of refl ectors, sources
and control gear, contributes to reducing local
authorities’ energy consumption.
Choice of materials
ECLATEC chooses noble materials such as
aluminium, steel and glass. for reasons of quality and
product durability.
Polymers are only used to make certain lighting bowls
and for a few technical parts.
These choices mean that ECLATEC products have
high recyclability and regeneration rates, well above
those required by the WEEE Directive.
For example, every tonne of recycled aluminium
generates 900 kg of second melt aluminium ingots.
In accordance with the European RoHS Directive,
Eclatec luminaires (excluding the lamp) do not use
any banned substances (lead, mercury, hexavalent
chromium, cadmium (except for certain electrical
contacts), PBB (polybrominated biphenyl), PBDE
(polybromo diphenyl ethers).
Recycling
Eclatec applies the European WEEE Directives
concerning the recycling of end-of-life products.
Concerning lamps
All the lamps sold by ECLATEC come from
manufacturers who are members of RECYLUM.
In application of the WEEE Directive, ECLATEC
passes on in a totally transparent way the cost of
recycling the lamp.
Concerning luminaires
There is no general system for recovering luminaires,
and responsibility for recycling therefore lies with the
customer.
However, RECYLUM has begun an experimental pilot
scheme in this fi eld and ECLATEC is participating in it.
A controlled manufacturing process
By applying the same concern for the environment
to its industrial process, ECLATEC aims to measure
and reduce the environmental impact of its industrial
activities.
This approach led to the company obtaining ISO
14001 certifi cation in 2009.
317
camaro 20, 24
chrome 20, 24, 43
cilia 46
elyxe porté 32, 33
elyxe suspendu 33
forville 64, 65
head 27, 28, 43
karma 29
lateral top indice 46
linea 21
u-bracket 45, 47
maka 19, 21, 24, 25
maka (wood pole) 23, 25
noa 48
orient top 60, 62
orient suspended 60, 61
orkid 21
para 29, 43, 47
pico 25
rezzo 20
salomé 48
saxo 48, 49
totem patin 28, 41, 43
top clip 58, 62
top elipt 42
top indice 46, 47
top tsana 29
track 29, 42, 64
altaïs pole 17, 23, 25
kiowa pole 32, 52, 54, 56
totem pole 28, 41, 43, 48, 50
curved pole 21, 47
tilted pole 36
aluminium tips 36
luminous tips 25, 29
accord 92
architek 91, 93
basalt 100
berry 72, 122, 131
camaro 76
catelux 96
chrome 77, 80
cilia 96, 105
climat 134
clipart 118
cliptown 118
cytise 73, 88, 93, 107,
108, 109, 119,
122, 126, 131
donna 71, 72
emeraude 140, 141
etia 119
etna 127
golf 99, 119
karma 89
kca 72, 100
kcr 131
kino 108, 109
lazio 121, 123
lima 101
maka 75, 76
massaï 104
musa 77, 80
noa 80, 97, 105, 122
orkid 73, 76, 77, 81
para 95, 96, 97, 123,
131
pardo 112
pico 130
prima 73, 81, 119, 123,
127, 131
profi l 93
retro 89
rochelongue 114, 115
saïa 97
saïan 73, 101
salome 105
samoa 77
saxo 87, 88, 89, 105
scada 112
shama 108
sorinieres 111, 113
tecla 103, 104
tonga 79, 81, 92
track 101
vecteur 93
volta 81
tilted pole 97, 126, 136
luminous tips 89, 107, 119, 136
aluminium tips 73, 93, 100, 101,
138, 139
BRACKETS, SUPPORTSGlossaryIM
AG
E R
AN
GE
P
age 1
3
LUM
IER
E R
AN
GE
P
age 6
9
Communication department ECLATEC - edition 04/2011
Website: www.eclatec.comE-mail: [email protected]
Photo credits: Eclatec, J. Trojanowski, P. Martin , P. Volpez, D. Truffaut, R. Wailliez, H. Berthoule, F. Audinet, B. Porte,
©iStockPhoto [Abejon Photography, Snap!photo, photolumen, LiseGagne, FrankyDeMeyer, Nicholas Monu, Photo Euphoria, Visual Light Photography, Paha_L, DIGIcal, TriggerPhoto, Shelly Perry, visi.
stock, Rich Legg, Digital Savant LLC, Inger Anne Hulbækdal, Rapid Eye Media, Chris Bernard Photography, harmatoslabu, Peter Kim Photography, vgstudio, Helder Almeida, mgkaya, James Tutor@
MatzaBallproductions.com, track5, BellaOra Studios, Frazaz, Khoj Badami, Lumigraphics, Alex Nikada, DSBfoto, Juanmonino, Lattapictures, Maria Pavlova, richterfoto, Georgi Anchev, Jaroslaw
Wojcik, Vladimirovic, Studioxil, izusek, Maridav, techno, Bim, brittak]
319