General Equipment

CHAMBER FURNACES

Standard features: ✓ 1100°C maximum operating temperature✓ 6, 14 or 23 litre chamber volumes✓ Tilt forward, drop down door with air gap to minimize

external temperature✓ Carbolite 301 controller, with single ramp to set-point facility✓ Delayed start & process timer function as standard✓ Vacuum formed, low thermal mass insulation✓ Hard ceramic hearth fitted as standard✓ Ventilated via top mounted ceramic chimney 

ELF

GENERAL PURPOSE CHAMBER FURNACES

Standard features: ✓ 1100°C, 1200°C or 1300°C maximum operating tempera

ture✓ 5, 13 or 23 litre chamber volumes✓ Up & away door keeps heated surface away from the user✓ Carbolite 301 controller with single ramp to set-point

facility✓ Delayed start & process timer function✓ Hard wearing alumina element carriers, furnace entrance &

hearth✓ Energy efficient low thermal mass insulation✓ Free radiating wire wound elements pitched for optimum

uniformity✓ Easy access to elements & controls simplifies maintenance

& servicing 

CWF

HIGH TEMPERATURE SINGLE ZONE TUBE FURNACE

Standard Features: ✓ 1500°C & 1600°C maximum operating temperatures✓ Using worktubes of 60 or 90mm outer diameter✓ Accepts worktubes with 180, 450 or 610mm heated tube

length✓ Silicon carbide heating elements✓ Horizontal configuration✓ Carbolite 301 controller, with single ramp to set-point

facility✓ Delayed start / process timer function as standard 

STF

General Equipment

Freeze Dryer ALPHA 1-2 LDplus

What is freeze drying (Lyophilisation)?Freeze drying means: Extraction of water from frozen material.The drying process takes place by avoiding the liquid state through sublimation, i. e. direct conversion from ice to vapor. This happens under vacuum and the temperature in the product is normally less than -10°C

The freeze dryer ALPHA 1-2 LDplus is suitable for drying of e. g. bacteria and virus cultures, blood plasma, serum fractions, antibodies, sera, vaccines and pharmaceutical products such as chloramphenicol, streptomycin, vitamins, ferments as well as plant extracts for biochemical tests.

Specification:Ice condenser : capacity max. 2.5 kg

: performance: max. 2 kg / 24 h: temperature: approx. –55oC

Physical data (without vacuum pump)Dimensions of the unit : width: 315 mm(ind. Vacuum flange connection) : height: 345 mm, dept: 460 mmWeight : approx. 28 kgNoise emissions : according to DIN 45635:49 dB(A)Electrical connection : 230 v / 50Hz (others upon request)Power consumption : 1,2 kVAMax. current : 5AFuse protection : 6,3 AAmbient temperature : Climate category: SN +10oC to +25oC,

higher temperatures upon request)

Consist of : Alpha 1-2 / LD Plus (cat #: 101021)Vacuum Pump RZ2 (cat #: 125302)Vacuum hose (cat #: 125702)Vacuum sensor TPR265 (cat #: 125479)Exhaust filter (cat #: 125501)Base plate (cat #: 120890)Acrylic Chamber (cat #: 121455)

General Equipment

ROTATIONAL VACUUM CONCENTRATOR FOR LABORATORYRVC SERIES

The Christ RVC-series is well structured in size and combination with different cooling traps and vacuum pumps. This gives the customer a maximum benefit for every application.

Examples for multiple applications:

Efficient concentration of DNA/RNA-samples, proteins etc. BioTech and Genetic Engineering Sample preparation in HPLC, GC, MS, Electrophoresis ... Isolation and synthesis of natural compounds Storage and handling of drugs (chemical libraries) Combinatorial Chemistry High-Throughput-Screening (HTS)

Rotational-Vacuum-Concentrator RVC 2-25 CD

 the mid-size concentrator: all-purpose table-top cencentrator for the routine concentration of larger sample volumes

 rotor capacity 108 x 1,5/2,2 ml tubes up to 2 x microtiter-plates standard acrylic glass cover, optional stainless steel/glass compound cover with window

(corrosion proof, e. g. for DCM/ACN) chemical resistant diaphragm pumps (2 m3/h suction capacity, 9 mbar final vacuum), standard,

vacuum systems with lower vacuum and vacuum controls, optional optional combination with cooling traps (2 or 4 litres) for increased evaporation

RVC 2-25 CD

General Equipment

Ultrasonic Cleaners Baths

Elmasonic P The most professional way to use ultrasound Digital displays, self-explanatory operation, clear indication of all

parameters, set and actual values at a glance.  Two different ultrasonic frequencies in one unit (frequency can be

changed during operation): 37 kHz - for coarse contaminations, for dissolving, blending, dispersing and degassing 80 kHz – noise-reduced operation, ideal for quiet work

areas, prolonged ultrasonic cleaning cycle, perfect for the cleaning of hollow spaces, e.g. capillaries

 7 special ultrasonic features (Normal, Pulse, Sweep, Degas, Power control, Pause, Auto Start)

Elmasonic S Series Offers... Sweep function for an optimized sound field distribution in the

cleaning liquid by frequency modulation Degas function for the efficient degassing of the cleaning liquid

and for laboratory purposes Electronic timer from 1 to 30 minutes Plastic carrying handles

Parameter S40H S60H S70H S100H S300H

Tank Volume 4.25 lt 5.75 lt 6.9 lt 9.5 lt 28 lt

Internal dimension 240x137x150mm 300x151x150mm 505x137x100mm 300x240x150mm 505x300x200

Ultrasonic frequency 37 kHz 37 kHz 37 kHz 37 kHz 37 kHz

Heating Power 200 W 400 W 600 W 600 W 1200 W

Drain duct diameter 3/8” 3/8” 3/8” 3/8” 3/8”

Transonic type P 30 H P 60 H P 70 H P 120 H P 180 H P 300 H

Outer Dimensions (mm)Inner Dimensions (mm)Tank capacityDrain duct V4A (‘’)Power consumption total (W)Ultrasonic FrequencyHeating power (W)SweepPulse

300x179x221240x137x1002.75 L3/8320/30037/80 kHz200integratedactivatable

365x186x271300x151x1505.75 L3/8580/55037/80 kHz400integratedactivatable

568x179x221505x137x1006.9 L3/882037/80 kHz600integratedactivatable

365x278x321300x240x20012.75 L3/8113037/80 kHz800integratedactivatable

390x340x321327x300x20018 L3/8113037/80 kHz800integratedactivatable

568x340x321505x300x20028 L3/8158037/80 kHz1200integratedactivatable

General Equipment

RESEARCH PLUS PIPETTEAvailable Volume: Adjustable: 0.1-2.5 µL, 0.5-10 µL, 2-20 µL, 10-100 µL, 20-

200 µL, 30-300 µL, 100-1,000 µL, 0.5-5 mL, 1-10 mL.  Multichannel: 0.5-10 µL, 10-100 µL, 30-300 µL. Fixed volume: 10 µL, 20 µL, 25 µL, 50 µL, 100 µL, 200 µL,

250 µL, 500 µL, 1,000 µL

Ultra light pipette with highest precision and accuracy, low operating force, ultimate ergonomics and flexibility, 4 digits volume display with magnifying shape, fully autoclavable, resistance to chemical, thermal and mechanical stress.

EPPENDORF ep T.I.P.S

Choose from a wide range of ep T.I.P.S. :Purity level (Eppendorf quality, Eppendorf PCR clean, Eppendorf biopur), filter (standard or dual filter), and packaging (box, reloads, set, singles, or rack).

MULTIPETTE PLUS, STREAM & XSTREAM

Positive displacement dispenser: Ideal for dispensing volume in long series, contamination-free (eliminates aerosol formation) application eg. PCR application, toxic, infectious or radioactive liquids, aggressive liquids (e.g. concentrated acids), also ideal for problematic liquids such as viscous, high vapor pressure and high/low density liquid.

VARISPENSER, VARISPENSER PLUS, TOP BURET, EASYPET

 MICROLITER 600, 700, 800 and 900 Series2.5 µL to 500 µLThis type of syringe*, for use with liquids, incorporates a stainless steel plunger that is individually fitted to its matching syringe barrel. The plunger is not interchangeable or replaceable. 600 Series• 2.5 µL and 5 µL• Reinforced plungers prevent plunger bending• Rugged, durable and long lasting 700 Series• 5 µL to 500 µL• Economical; great for chromatography• Also available: ground glass tip (luer tip, LT) termination 800 Series• 5 µL to 250 µL• Reinforced plungers• Plunger stop prevents plunger blow-out 900 Series• 5 µL and 10 µL• Reinforced plungers• Perfect for students: rugged and durable MODIFIED MICROLITER 7000 Series0.5 µL to 5 µL• Positive displacement syringe has a tungsten plunger wire that travels inside the needle• The needle essentially acts as the glass syringe barrel; no dead volume

General Equipment

Syringe size

600 series 700 series 800 series 900 series 7000 series 1000 series 1700 series 1800 series

0.5-5 μl  

2.5-5 μl  

5-10 μl  

5-250 μl    

10-250 μl    

10-500μl    

1-100 ml  

Purge & Trap Syringes 5 mL and 25 mL These syringes are designed for the analysis of drinking water Samples according to EPA purge and trap concentration techniques.

Carbon Analyzer Syringes 50 µL to 250 µL For water analysis with Total Organic Carbon (TOC) analyzers. Wetted parts are stainless steel and borosilicate glass. Syringes have a metal luer tapered hub cemented over a MICROLITER 700 Series N syringe. The luer hub fits precisely into the inlet of a total carbon analyzer.

PB600 Repeating Dispensers 10 µL to 10 mL Consistently dispense sample up to 50 times with the push of a button.The repeating dispenser works with MICROLITER or GASTIGHT syringes from 10 µL to 10 mL.

SampleLock™ Syringes 50 µL to 100 mL Lock your sample in the SampleLock syringe with the easy-to-use twist valve. An internal standard can be injected through the valve port into samples contained in the SampleLock syringe. Also, pre-pressurize gaseous samples prior to GC injection. The positive rear plunger stop prevents loss of sample and plunger blowout at elevated pressures.

Digital Syringe™ .5 µL to 500 µL • The only N.I.S.T. traceable, calibrated syringe device available• Comes completely calibrated with its own “Certificate of Calibra

tion”• Easy-to-read LCD screen displays volume dispensed within ±0.5 % of the syringe volume• Used with Hamilton syringes with total volumes of 0.5 to 500 µL

Super Syringes 5 L to 2 L For air sampling, preparing gas standards; or calibrating reservoirs,pneumographs, and spirometers. Used in industries such as: mining,chemical production, grinding and mineral processing. Syringe barrel is made of a clear acrylic material.

OTHER SYRINGES AVAILABLEPlease call us to request any of the following syringe:• LIFE SCIENCE SYRINGES, • CHROMATOGRAPHY SYRINGES, • INSTRUMENT SYRINGES

HAMILTON SPECIAL SYRINGE

General Equipment

General Equipment

COOLING CIRCULATORS  Refrigerated Heating Bath with air-cooled refrigerating unit. Consisting of isolated cooling bath made of stainless steel with immersion thermostat. Pump and wetted parts made from stainless steel or high-resistant plastics.

MPC-Controller:Modern and easy to use microprocessor controller with a large temperature display. Limited to essential functions only: * Large temperature display

* LED indicators for pump, cooling and heating

* Simple operation using only 3 keys

CC-Pilot: controller with new innovative E-grade technology for extended functionality without swapping the controller. An activation code is entered via the control panel and the proven Plug & Play technology for professional service. The bright TFT display shows all the process relevant data. User friendly interface: The functions self-explanitory and are listed in alphabetical order in each of the selected languages. Easy-Control: Is virtually identical to the unistats. Display resolution in the basic version is 0,1K. Set point limits, optical and acoustical alarm, mains failure automatic function. Sensor calibration, control via RS232 interface and Com.G@te Namur (option) e.g. for connection to a process control system, remote control via data cable.

K12-cc-NRK12-mpc-NR

Specification :Operating temperature range-20...40 °C Temperature adjustment ; digital Temperature indication : digital Internal temperature sensor : Pt 100 Resolution of display : 0.1 K Temperature stability at -10°C : 0.2 K Safety classification : Class I / NFL Cooling power at 15°C : 0.3 kW at 0°C : 0.2 kW at -10°C : 0.14 kW at -20°C : 0.07 kW Refrigeration machineair-cooled, natural refrigerant Refrigerant : R290 Refrigerant quantity 0.04 kg

Minichiller-NR

Model

Temp. Range (oC)

Heating Power (kW)

Bath Pump Data Cooling Powet (kW) at

Dimensions (WxDxH) (mm)

Opening (mm)

Depth (mm) Vol (ltr)

max. Pressure (l/min)

max. Suction (l/min)

0oC -10oC -20oC

K12-cc-NR -20...200 2 290x152 150 12 27 25 0.2 0.12 0.05 350x560x430

K12-mpc-NR -20...200 2 290x152 150 12 20 17

0.2

0.12 0.05 350x560x430

K15-cc-NR -20...200 2 290x152 200 15 27 25 0.2 0.12 0.05 350x560x430

K15-mpc-NR -20...200 2 290x152 200 15 20 17 0.2 0.12 0.05 350x560x430

K20-cc-NR -30...200 2 290x329 150 20 27 25 0.35 0.27 0.16 350x555x615

K20-mpc-NR -30...200 2 290x329 150 20 20 17 0.35 0.27 0.16 350x555x615

K25-cc-NR -30...200 2 290x329 200 25 27 25 0.35 0.27 0.16 350x555x615

K25-mpc-NR -30...200 2 290x329 200 25 20 17 0.35 0.27 0.16 350x555x615

Picture

Model Lab disc C-MAG MS 7 Midi MR digital

Max volume 0.8 L 10 L 50 L

Speed range 15-1500 rpm 100－1500 rpm 0-1000 rpm

Plate polyester Ceramic stainless steel

Advantage Thin12mm;Automatic positive &

negative rotationSolenoid drive

Strong motor；Anti rust；

Control panel is higher, anti-splash。

Big volume mix；Digital speed display；

Timer function（0－56min).

Picture

Model C-MAG HS 7 RCT basic RET basic RET control/t

Max volume 10 L 20 L 20 L 20 L

Speed range 100-1500 rpm 50-1500 rpm 50-1700 rpm 50-1200 rpm

Max temp. 500 oC 310 oC 340 oC 340 oC

Plate Ceramic Aluminium alloy

Stainless steel Stainless steel

Advantage Strong motor；Anti-corrosion plate ；Control panel is higher, anti-splash

PT1000 sensor；Digital temp. display：Error code；Membrane。

PT1000 sensor；Ultra-fast heating speed；Protection membrane。

Ultra-fast heating speedProtection membraneAble be PC controlled；Timer function

General Equipment

MAGNETIC STIRRER & HOT PLATE

Single P oint M agnetic S tirrer

Single P oint Heating Magnetic Stirrer

General Equipment

Multi-point Heating Magnetic Stirrer 

Model MTS 2/4 digital

KS130 basic/control

KS260 basic/ control

HS260 basic/ control

HS501 digital

Shaking movement

circular orbital orbital Reciprocating Reciprocating

Orbital diameter

3 mm 4 mm 10 mm 20 mm 30 mm

Max weight 2 or 4 microtiter plates

2 kg 7.5 kg 7.5 kg 15kg

Speed display scale LED/Digital LED LED Digital

Speed range 0-1100 rpm 80-800 rpm 20-500 rpm 20-300 rpm 0-300 rpm

Others KS130 control: PC Control

KS260 control: PC Control

HS260 control: PC Control

General Equipment

Vortex Mixer VORTEX Genius 3 (VG 3)

General Equipment

DISPERSERS

Model T18 T25

Volume（ml) 1－1500ml 1－2000ml

Speed range 3500－24000 rpm

3400－24000 rpm

Speed display Scale Digital

Model RW 20 digital RW 28 basic RW 47 D

Max. quantity 20 L 80 L 200 L

Max. viscosity 10,000 mPas 50,000 mPas 100,000 mPas

Max. torque 150 Ncm 900 Ncm 3000 Ncm

Speed range 60-2000 rpm 60-1400 rpm 57-1300 rpm

Advantage Strong motor;

High & Low speed

Low speed for high viscosity, high speed for strong stirring

IP20

Strong motor;

High & Low speed

Low speed for high viscosity, high speed for strong stirring

IP42

Strong motor;

High & Low speed

Three-phase motor;

High IP：IP54

General Equipment

Electronic overhead stirrers

Electronic overhead stirrers

General Equipment

ROTARY EVAPORATOR

Model RW16basic

Eurostardigital

EurostarPower basic

EurostarPower control-visc

Max Quant. 10 L 20 L 40 L 40 L

Max visc. 10,000mPas

10,000mPas

50,000mPas

50,000mPas

Max torque 40 Ncm

30 Ncm

60 Ncm

60 Ncm

Speed (rpm) 40-1200 50-2000 50-2000

50-2000

Advantage Small footprint

Micro-processor control

Power Relative torque display; RS232

General Equipment

General Equipment

Measurement method Volumetric titration method

Measuring range 1. Titration volume : 0.005 to 99.995 mL2. Water content : 0.1mg to 500 mg H2O3. Water concentration 10ppm to 100% H2O

Burette Single burette

Endpoint detection Polarized potential level detection with twin platinum electrode

Endpoint sense method EP is determined when preset polarized potential elapses waiting timeWaiting time range : 1 ~ 99 sec

Titration form Normal titration

Burette precision 1. Capacity : 10 mL burette2. Dispense precision : ±0.015 mL3. Repeatability : ±0.005 mL

Key entry Direct input with keys on the touch screenCable between the panel and titration unit can be extended

Display 1. 8-inch (163.2 x 122.4 mm) 256-color Liquid Crystal Display with 800 x 600 dots2. Language : English or Japanese3. Real-time display of titration and evaporation curve

Calculation Water concentration , Statistics (Mean, SD and RSD),Auto averaging, Blank level and Factor value

Other features 1. Stirrer with auto reagent dispenser as standard equpment2. Auto drift cancellation with potential stat to maintain EP level3. Auto titration start by sensing sample discharge into the flask4. Up to 10 storage of blank values and factor values.

GLP conformance Check with standards : Notice of check date and record of check results.Reagent factor calibration : Prior notice of date for calibration and reagent, change and record of calibration resultsOperator registration : Up to 50 operators can be registered

External I/O COM port (Mini-DIN) x 2 channels for printer, balance and PC (Data capture software)

Power source 100~120 VAC / 200~240VAC, 50/60 Hz

Power consumption 1. Touch-screen control unit : 20W2. Measuring unit and stirrer : 30W

Dimensions 1. Touch-screen control unit : 230W x 280D x 255H (mm)2. Measuring unit : 120W x 363D x 610H (mm)3. Stirrer : 118W x 225D x 320H (mm)4. Solvent change unit : 240W x 170D x 280H (mm)5. Power burette : 120W x 363D x 610H (mm)

Standard components and parts Volumetric Karl Fischer measuring unitSolvent unit changeTouch screen main control unitMagnetic stirrerS-type titration vesselTwin platinum electrode M714Operation manualOthers

General Equipment

General Equipment

ModelKERN

Weighing range

(Max) g

Verific. Value

mg

Min. Loadmg

Reproducibilitymg

Linearitymg

ABJ 120-4M 120 1 10 0.1 +/- 0.2

ABJ 220-4M 220 1 10 0.1 +/- 0.2

ABT 320-4M 320 1 10 0.1 +/- 0.2

ModelKERN

Weighing range (Max) g

Readoutg

Linearityg

440-33N 200 0.01 +/- 0.02

440-35N 400 0.01 +/- 0.03

440-45N 1000 0.1 +/- 0.2

440-47N 2000 0.1 +/- 0.2

General Equipment

POLARIMETER—PS 8000

General Equipment

GLASSWARE WASHER-DRYER

Washer Model

Wash Levels

Internal Dimensions Features Drying (type)

820 LX 2 508 x 535 x 510 mm

Fitur tambahan: user bisa setting 2 program tambahan, eksternal chamber drying (heating element) dan internal glassware drying (injector+hepa filter)

Super Drying; washer-dryer with injection

drying

1300 LX 3 634 x 525 x 500 mm

Fully automatic washer/dryer has an electronic programmablemicroprocessor capable of storing upto 42 programs (4 pre-programmed,38 user definable, password protected) for pre-wash, wash, rinse, purified/ DI rinse, HEPA filtered drying & cooling.

Super Drying; washer-dryer with injection

drying

1800 LX 1-6 770 x 1064 x 510 mm

1-6 level wash, rack actuated via automatic manifold connection , two stainless still filter protect recirculation and drain pump from debris

Drying system : HEPA filtered chamber and direct injection drying

General Equipment

WATERBATH

General Equipment

WATERBATH

General Equipment

General Equipment

Specifications MS – DM :

- Digital temperature controller- Case construction : Steel, with chemically resistant coating- Thermal insulation : Molded silica powder- Heating element : Nichrome wire- Sensor probe : CA (K) Type, Φ 4.8mm dia x 200mm long : 1.5mm lead- Power supply : 220V AC- Temp. range options : Low to 100˚C max, Medium to 200˚C

General Equipment

General Equipment

Standard Benchtop Meter - pH METER

Specification Lab 850 Lab 860

mV measurement Range: -999.9 ... +999.9 mV; -1999 ... +1999 mV √ √

Accuracy (±1digit) in mV √ √

pH measurement Range: -2.000 ... +19.999 pH √ √

Accuracy (±1digit) √ √

Temperature measurement Range: -5.0°C to + 120.0 °C √ √

Unit °C / °F selectable √ √

Interfaces RS-232-C interface, bidirectional √

USB interface (slave) √

Diagnostic plug √

Data storage 800 records √

Additional features Supports all GLP needs √

PH Range

-2.000 … +20.000 pH-2.00 … +20.00 pH-2.0 … +20.0 pH

PH Accuracy (for each measuring area)(± 1 digit)

± 0.003 pH± 0.01 pH

mV Range-1999.9 … +1999.9 mV-1999 … +1999 mV

mV Accuracy (for each measuring area)(± 1 digit)

± 0.2 mV± 1 mV

ISERange 1.0E-40 … 9.9E39 mg/l

Temperature Range / AccuracyAccuracy (± 1 digit)

-35.0 … +150.0 °C± 0.1 °C

DisplayQVGA colour graphic display120 x 90 mm with CFL lighting

Measuring value storage (manual/automatic)

> 10 000 data sets,storage intervals from1 s … 60 min

General Equipment

General Equipment

Model Evolution 201

Spectral Bandwidth 1nm

Optical Design Double Beam with sample and reference cuvet positions; Czerny-Turner Monochromator

Light Source Xenon flash lamp, 3-year warranty (Typical lifetime: 5 years)

Detector Dual Silicon Photodiodes

Wavelength

Range 190 to 1100nm

Accuracy ±0.8nm (full range 190 to 1100nm)± (546.11nm mercury line)

Scan Speed <1 to 6000nm/min.; variable

Photometric

Range >3.5A

Accuracy

0.5A: ±0.0004A1A: ±0.006A2A: ±0.010AMeasured at 440nm using neutral density filters traceable to NIST*/NLPL

• Local Control or PC configurations – with INSIGHT software provides compete set of data collection and processing tools• Wide accessory range with various temperature control options sample changers, sippers and solid sampling devices• System calibration, validation and data security tools• Complete set of BIO applications and accessories (Evolution 260)

General Equipment

Specifications :Capacity 24 x 1.5/2.0mL

Timer 1 to 99 min.Noise Level <56dbAMax. Speed

MicroCL 17/17R 13,300rpm

MicroCL 21/21R 14,800rpm

Max. RCF

MicroCL 17/17R 17,000xg

MicroCL 21/21R 21,100xg

TemperatureTemperature Range (17R and 21R only)

-9°C to +40°C, ±1°C

Dimensions

MicroCL 17/21 13.75 x 9.63 x 8.88 in. (25.2 x 24.3 x 22.5cm)

MicroCL 17R/21R 17.5 x 11.63 x 12.88 in. (44.5 x 29.5 x 33cm)

Net Weight

MicroCL 17 and 21 24.2 lbs. (11kg)

MicroCL 17R and 21R 61.7 lbs. (28kg)

General Equipment

SpecificationsCapacity 300mL (6x 50mL)

Display [LCD] 4-character LCD

Control Microprocessor

Speed Control 1000 to 5200rpm, ±100rpm

Max. Speed 5200rpm

Max. RCF 3350 x g

Timer5 sec. to 1 min. in 15 sec. increments; 1 to 5 min. in 5 sec. increments, 5 to 30 min. in 1 min. increments; HOLD to 99 min. 59 sec.

Noise <65dBA

Dimensions (L x W x H) 15.75 x 13.25 x 10.75 in. (40 x 34 x 27.5cm)

Height (Cover Open) 24 in. (61cm)

Net Weight 24 lb. (11kg)

Specifications

Capacity 4 x 135mL

Display Digital

Control Microprocessor

Control Speed Set/Step/Display 300 to 6500rpm, ±10rpm

Max. Speed 6500rpm

Max. RCF 3684xG

Feature(s) High/Low acceleration and braking

Timer 1 to 99 min. plus HOLD

Motor Direct-drive brushless induction

Noise <57dBA

Dimensions18.1L x 14.6W x 11 in.H (46 x 37 x 28cm)

Net Weight 61.7 lb. (28kg)

General Equipment

Specifications

Capacity 1.6L (4 x 400mL)

Control Microprocessor

Display Digital

Max. Speed 15,200rpm

Max. RCF 25,830 x g

Memory 6 programs, direct access

Timer 9 hr. 99 min. plus HOLD

Other FeaturesAuto-Lock III rotor locking system, SMARTspin imbalance detection system, Certified ClickSeal biocontainment system, language selection, 9 acceleration/10 braking profiles, motorized lid latch

Motor Direct, brushless induction low-profile motor

Noise <61dBA

TemperatureSet renge (for SL16R) -10°C to 40°C

Specifications

Timer 0 to 30 min. plus HOLD

Fixed SpeedFixed RCF

2700rpm920xG

Noise ~65dBA

Dimensions 14.75L x 11.5W x 9.5 in.H (37.5 x 29.2 x 24.1cm)

Net Weight 16 lb. (7.2kg)

Specifications

Capacity 3L (4 x 750mL)

Control Microprocessor

Display Digital

Max. Speed 15,200rpm

Max. RCF 25,314 x g

Timer 9 hr. 99 min. plus HOLD

Memory 6 programs, direct access

Other Features

Auto-Lock III rotor locking system, SMARTspin imbalance detection system, Certified ClickSeal biocontainment system, language selection, 9 acceleration/10 braking profiles, motorized lid latch

Motor Direct, brushless induction low-profile motor

Temp. set range (for SL40R)

-10°C to 40°C

Package of SL16/16R, complete with Swing Rotor bucket TX-200 # 75003658 ( 4-Place x 100 ml), round buckets # 75003659, Sealing caps # 75003660 and Adaptor # 75003801 (100 ml)

Specification : Measuring principle : Manometric, mercury free,

electronic pressure sensor Range 0-40, 0-80, 0-200, 0-400, 0-800, 0-2000,

0-4000 mg/l O2 Accuracy : 0.5% full scale at 20˚C Measurement parameter display : BOD range,

volume, duration, time

BOD Measurement System – BOD OxiDirect

BOD Incubator – ET 618-4

Specification :  Temperature range : +2˚C to 40˚C, in step 1˚C Resolution : 0.1˚C Net Capacity 135 liters LCD display fan output 320m3/h, come with 3

shelves Weight 39 kg Internal dimension : 515L X 430W X 700H mm External dimension : 600L X 600W X 820H mm

Technical Data :Optics : LEDs, interference filters (IF) and photo sensor in transparent sample chamberWavelength specification : 430 nm interference filter

610 nm interference filterWavelength Accuracy : 1 NMPhotometric Accuracy : 3% FS (T=20 C-25 C)

MD 200-COD VARIO SET UP

General Equipment

NEW

Technical Data :Optics : LEDs, interference filters (IF) and photo sensor in transparent sample chamberWavelength specification : 430 nm interference filter

610 nm interference filterWavelength Accuracy : 1 NMPhotometric Accuracy : 3% FS (T=20 C-25 C)

General Equipment

WATER PURIFICATION SYSTEM

GENPURE UF/UV

Specification: Flow rate, up to : up to 2 l/min Operating pressure in bar, min/max : 2 – 6 bar Conductivity : 0.055 µS/cm Resistance at 25 °C : 18.2 MΩxcm TOC value : 1 – 5 ppb Bacterial content in KbE/ml : <1 Particles : < 1Endotoxines in EU/ml : 0,001 Electrical requirements : 230 V / 50Hz Power consumption : 1 kWFeedwater connector : R 3/4" Dimensions B x T x H in mm : 372 x 330 x 615 Weight : 23 kg  

LAB TOWER EDI-15

Specification : Ultra-pure water specifications ASTM type I:Conductivity in µS × cm : 0.055Resistance in MΩ × cm : 18.2Removal performance l/min. : up to 2TOC-Value in ppb : < 10TOC-Value in ppb (models with UV) : 1 – 5Bacteria content in KbE/ml with sterile filter : < 1

Specification : Ultra-pure water specifications ASTM type I:Conductivity in µS × cm : 0.055Resistance in MΩ × cm : 18.2Removal performance l/min. : up to 2TOC-Value in ppb : < 10TOC-Value in ppb (models with UV) : 1 – 5Bacteria content in KbE/ml with sterile filter : < 1

General Equipment

ME 2C NT

Technical Data : Number of heads / stages : 1 / 1Max. pumping speed at 50/60 Hz m3/h : 2.1 / 2.4Max. pumping speed at 50/60 Hz cfm : 1.2 / 1.4Ultimate vacuum (abs.) mbar/torr : 70 / 52Ambient temperature range (operation)°C : 10 - 40Ambient temperature range (storage)°C : -10 - 60Max. back pressure (EX) (abs.) bar : 1.1Inlet connection (IN) : Hose nozzle DN 10 mmOutlet connection (EX) : Hose nozzle DN 10 mmRated motor power kW : 0.18Rated speed at 50/60 Hz min-1 : 1500/1800Degree of protection : IP 40Dimensions (L x W x H) mm : 243 x 211 x 198Weight kg : 10.2Noise level at 50 Hz, typ. dBA : 45

One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors at low vacuum requirement. In contrast to waterjet pumps they do not consume water and therefore do not produce any contaminated waste water in daily use. Typical applications are vacuum ovens, filtrations and multi-port manifolds for medium throughput, as well as pumping of gases and oil-free evacuation in general. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar.

Vacuum controller CVC 3000E C3

Performance features:-controls vacuum, cooling water and venting on demand-intuitive operation with turn-and-tap jog wheel and clear text menus in 14 languages-interactive communication (PC) through RS 232C serial interface-manual/semi-automatic determination of vacuum setting-automatic setting of hysteresis with manual override Item Consist of:-CVC 3000 work station controller with mounted-in-line solenoid vacuum valve C3 and mounting rod.-With hose nozzles DN 6/10 mm towards pump and application.

Ordering data :Product name Mains voltage and frequency Plug Order no.CVC 3000E C3 100-230 V~ 50-60 Hz CEE/CH/UK/US/AUS 2614120

General Equipment

ROTARY VACUUM PUMPRE 2.5 / RZ 2.5 The one-stage RE 2.5 and two-stage RZ 2.5 are high-performance rotary vane pumps with extra compact design and low weight. They are the ideal solution for a wide range of laboratory and process applications that require low ultimate vacuum at medium gas flow rate.The pumping unit is compact, user-friendly, and well-arranged, with oil mist filter at the outlet, a valve, and a T-connection for a gauge. The RZ 2.5 is also available combined with the oil mist filter (FO) and the VS 16 valve as a package.

Technical data Unit RE 2.5 RZ 2.5

Number of stages 1 2

Max. pumping speed at 50/60 Hz m3/h 2.3 / 2.8 2.3 / 2.8

Max. pumping speed at 50/60 Hz cfm 1.4 / 1.6 1.4 / 1.6

Ultimate partial vacuum (abs.) mbar 3 x 10-1 4 x 10-4

Ultimate vacuum (abs.) mbar/torr 3 x 10-1 / 2.3 x 10-1 2 x 10-3 / 1.5 x 10-3

Ultim. vac. (abs.) with gas ballast mbar/torr 8 x 10-1 / 6 x 10-1 1 x 10-2 / 0.75 x 10-2

Water vapor tolerance mbar 40 40

Ambient temperature range (operation) °C 12 - 40

12 - 40

Ambient temperature range (storage)

°C -10 - 60 -10 - 60

Oil capacity (B-Oil) min / max l 0.18 / 0.51 0.1 / 0.28

Max. back pressure (EX) (abs.) bar 1.1 1.1

Inlet connection (IN) Small flange KF DN 16 Small flange KF DN 16

Outlet connection (EX) Hose nozzle DN 10 mm Hose nozzle DN 10 mm

Rated motor power kW 0.18 0.18

Rated speed at 50/60 Hz min-1 1500/1800 1500/1800

Degree of protection IP 40 IP 40

Dimensions (L x W x H) mm 316 x 125 x 190 316 x 125 x 190

General Equipment

VARIO® chemistry diaphragm pump MZ 1C VARIO  

 Technical data Vacuum controller : CVC 3000Number of heads / stages : 2 / 2Max. pumping speed (m3/h) : 1.0Max. pumping speed (cfm) : 0.6Ultimate vacuum (abs.) mbar/torr : 12 / 9Ultim. vac. (abs.) with gas ballast mbar/torr : 20 / 15Ambient temperature range (operation) °C : 10 - 40Ambient temperature range (storage) °C : -10 - 60Max. back pressure (EX) (abs.) bar : 1.1Inlet connection (IN) : Hose nozzle DN 10 mmOutlet connection (EX) : Hose nozzle DN 10 mmRated motor power kW : 0.16

VARIO® chemistry diaphragm pump MZ 1C VARIO  

 Technical data Vacuum controller : CVC 3000Number of heads / stages : 2 / 2Max. pumping speed (m3/h) : 1.0Max. pumping speed (cfm) : 0.6Ultimate vacuum (abs.) mbar/torr : 12 / 9Ultim. vac. (abs.) with gas ballast mbar/torr : 20 / 15Ambient temperature range (operation) °C : 10 - 40Ambient temperature range (storage) °C : -10 - 60Max. back pressure (EX) (abs.) bar : 1.1Inlet connection (IN) : Hose nozzle DN 10 mmOutlet connection (EX) : Hose nozzle DN 10 mmRated motor power kW : 0.16

Ordering dataProduct name Mains voltage and frequency Plug Order no.MZ 1C VARIO 200-230 V~ 50-60 Hz CEE 696670

100-120 V~ 50-60 Hz

General Equipment

Chemistry DIAPHRAGM PUMP MZ 2C NT

Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The two-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum. All major parts in contact with pumped media are made of chemically resistant fluoroplastics.The new NT-series features further improved performance data and superior vapor tolerance.

Technical data

Number of heads / stages : 2 / 2Max. pumping speed at 50/60 Hz m3/h : 2.0 / 2.3

Max. pumping speed at 50/60 Hz cfm : 1.2 / 1.4

Ultimate vacuum (abs.) mbar/torr : 7 / 5

Ultim. vac. (abs.) with gas ballast mbar/torr : 12 / 9

Ambient temperature range (operation) °C : 10 - 40

Ambient temperature range (storage) °C : -10 - 60

Max. back pressure (EX) (abs.) bar : 1.1

Inlet connection (IN) : Hose nozzle DN 10 mm

Outlet connection (EX) : Hose nozzle DN 10 mm

Rated motor power kW : 0.18

Rated speed at 50/60 Hz min-1 : 1500/1800

Degree of protection : IP 40

Dimensions (L x W x H) mm : 243 x 243 x 198

Weight kg : 11.1

CE mark : Yes

NRTL certification :Canada and the USA

Items supplied :Pump completely mounted, ready for use, with manual

Accessories : Rubber vacuum tubing DN 10 mm

(686002)

This chemistry vacuum system has a wide range of applications like evacuation, evaporation and pumping of gases and vapors in chemical, biological and pharmaceutical laboratories. Typical applications are rotary evaporators, vacuum concentrators and vacuum drying ovens. The separator at the inlet (AK), made of glass with protective coating, retains particles and liquid droplets. The waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near-100-percent solvent recovery, efficient recycling, and active protection of the environment.

MZ 2C NT +AK+EK

General Equipment

 Capacity : 1 liter Switch setting : two speed : high 22,000 and low 18,000 60 second mechanical timer Base : die cast epoxy coated base (8010BU) Container : stainless steel container with handle and stainless steel

cover (SS610) Overall height : 15 inches (38 cm) Weight : 9.4 lbs (4.3 kg) Rated volts : 230 volts, 50/60 Hz

Base Unit : 8010BUContainer : SS610

 Capacity : 4 liter Switch setting : Off – Lo – Med – Hi – Pulse RPM : 16,800 – 18,800 – 21,500 – 21,500 Rating : 230 Volts – 50/60Hz – Single phase – AC -7.5Amps Base : Die cast gray epoxy coating Container : Stainless steel with Stainless steel blades – Stainless steel

clamp on lid with rubber gasket & stopper Bearing : High performance ball bearings Overall height : 22.25 inches (56.5 cm) Weight : Net shipping weight 38 lbs (17.24 kg)

24 CB10C

LABORATORY BLENDER