PRIMERGY RX200 S2 Configuration Sheets
About this manual
� Abbreviations
The following expressions and abbreviations are used to describe the product names used in this manual.
Microsoft, Windows, MS, Windows Server are registered trademarks of the Microsoft Corporation in the USA and other countries. Intel and Intel are registered trademarks of the Intel Corporation and affiliated companies in the United States and/or other countries.All other hardware and software names used are trademarks or registered trademarks of their respective manufacturers. Other product names are copyrights of their respective manufacturers.
All Rights Reserved, Copyright© FUJITSU LIMITED 2005
A Configuration Sheet
Use this form to record the hardware configuration and various settings of your server.
B Design Sheet
Use this form to record the software settings.
C Accident Sheet
Use this form to record any failures that occur in your server.
Product names Expressions and abbreviations
PRIMERGY RX200 S2 This server, or server
Microsoft® Windows Server™ 2003, Standard Edition Windows Server 2003, Standard Edition or Windows 2003
Microsoft® Windows Server™ 2003, Enterprise Edition Windows Server 2003, Enterprise Edition or Windows 2003
Microsoft® Windows® 2000 Server Windows 2000 Server or Windows 2000
Microsoft® Windows® 2000 Advanced Server Windows 2000 Advanced Server or Windows 2000
1
2
Contents
A Configuration Sheet
A.1 Hardware Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
A.2 BIOS Setup Utility Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
A.3 SCSI Setup Utility Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A.4 System Resource Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A.5 RAID Design Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
B Design Sheet
B.1 RAID Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
B.2 Disk Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
B.3 OS Wizard (Windows 2003 Install Wizard) . . . . . . . . . . . . . . . . . . . . . . . . 15
B.4 OS Wizard (Windows 2000 Install Wizard) . . . . . . . . . . . . . . . . . . . . . . . . 20
B.5 Application Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
C Accident Sheet
A.1 Hardware Configuration
A Configuration Sheet
Use this form to record the hardware configuration and various settings of your
server.
Fill-in (or mark in some way) the checkboxes (�) appropriate for your server.
A.1 Hardware Configuration
� The internal CD-ROM drive unit
� The internal hard disk units
� CPU
� Memory
installed position Product ID
CD-ROM drive bay ❑ CD-ROM ATAPI
10,000rpm 15,000rpm
Bay 1 ❑ 73.4GB ❑ 146.8GB ❑ 300GB ❑ 73.4GB
Bay 2 ❑ 73.4GB ❑ 146.8GB ❑ 300GB ❑ 73.4GB
Installed
position
Installation internal hard disk units
Installation CPU Number
❑ Processor Xeon 3.0GHz / 2MB
❑ Processor Xeon 3.2GHz / 2MB
❑ Processor Xeon 3.6GHz / 2MB
* One CPU is installed.
❑ 1(*) ❑ 2
Installation slot Installation memory
Memory slot A1(*) ❍512MB ❑ 1GB ❑ 2GB
Memory slot B1(*) ❍512MB ❑ 1GB ❑ 2GB
Memory slot A2 ❑ 512MB ❑ 1GB ❑ 2GB
Memory slot B2 ❑ 512MB ❑ 1GB ❑ 2GB
Memory slot A3 ❑ 512MB ❑ 1GB ❑ 2GB
Memory slot B3 ❑ 512MB ❑ 1GB ❑ 2GB
Memory slot A4 ❑ 512MB ❑ 1GB ❑ 2GB
Memory slot B4 ❑ 512MB ❑ 1GB ❑ 2GB
* 512MB is installed in memory slot A1/B1 for all models
(except when custom made service is used).
3
4
A Configuration Sheet
� Expansion cards
1 2
RAID Ctrl 2-Channel 128MB w/BBU (PG-142E3) ❑ -
IB HCA Card (PG-HSC101) ❑ -
Eth. Ctrl 1000-BASE-T Cu (PG-1852) ❑ -
Eth. Ctrl 2 x 1000-BASE-T Cu (PG-1862) ❑ -
Fibre Channel Controller (PG-FC106) ❑ -
Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-1882L) ❑ ❑
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L) ❑ ❑
SCSI Ctrl U160 lp (PG-130L) ❑ ❑
Remote Service Board (PG-RSB103L) ❑ ❑
-: indicates that this item cannot be installed.
PCI slotExpansion card (Product ID)
A.2 BIOS Setup Utility Parameters
A.2 BIOS Setup Utility Parameters
The marks used in each menu indicate: ❑: Parameters ❍ : Settings at time of purchase ♦: Unchangeable settings
� Main menu
Setting
Enter current t ime
Enter current date
❑ Disabled ♦1.44/1.25 MB 3 1/2"
[Enter]
♦Auto ❑ None ❑ CD-ROM ❑ IDE Removable
❑ Other ATAPI ❑ USER ❑ ATAPI Removable
Disabled (only displayed and unchangeable)
Disabled (only displayed and unchangeable)
FPIO4/DMA2 (only displayed and unchangeable)
❑ Disabled ♦Enabled
Mode2 (only displayed and unchangeable)
[Enter]
❑ Disabled ♦Enabled
❑ Disabled ❍Enabled
♦Disabled ❑ Enabled
♦Disabled ❑ Enabled
♦Disabled ❑ Enabled
❑ Disabled ♦Enabled
❑ Disabled ♦Enabled
❑ CD-ROM Drive
❑ Removable Devices
❑ Hard Drive
❑ LSI MPI Boot Support
❑ IBA GE Slot 0330 v1220
❑ IBA GE Slot 0331 v1220
Diskette ❑ Standard
Hard Drive ❑ #50 ID00 LUN0 FUJITSU
❑ Disabled ♦Enabled
Display available base memory size up to 1MB
Display memory size of 1MB or more
Base Memory
Primary Master (Standard CD-ROM)
Boot Options
32 Bit I/O
Type
Transfers Mode
LBA Translation
PIO Mode
Ultra DMA Mode
Extended Memory
POST Errors
Keyboard Check
SM Error Halt
Quick Boot
Quiet Boot
Memory Testing
MultiBoot for HDs
Boot Menu
Boot Sequence
Diskette A
Parameters
System Time
System Date
5
6
A Configuration Sheet
� Advanced menu
(continued)
Setting
[Enter]
❑Disabled ❑Enabled ❍Auto
❍System ❑BMC ❑Shared
♦ Local ❑Remote ❑Remote Once
❑Disabled ❍Enabled
❑Disabled ❑Enabled ❍Auto Detect
[Enter]
[Enter]
❑Disabled ♦ Enabled
Option ROM Scan ❍Disabled ❑Enabled
Latency Timer ❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h
Option ROM Scan ❍Disabled ❑Enabled
Latency Timer ❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h
[Enter]
❑Disabled ♦ Enabled
❑Disabled ❍Enabled
❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h
[Enter]
❑Disabled ♦ Auto ❑ IRQ 3 ❑ IRQ 4 ❑ IRQ 5 ❑ IRQ 9 ❑ IRQ 10
❑ IRQ 11 ❑ IRQ 15
[Enter]
Option ROM Scan ❍Disabled ❑Enabled
Latency Timer ❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h
Option ROM Scan ❍Disabled ❑Enabled
Latency Timer ❑Default ❑0020h ♦ 0040h ❑0060h ❑0080h ❑00A0h ❑00C0h ❑00E0h
[Enter]
[Enter]
❑Disabled ♦ Enabled
❑Disabled ❍Enabled
❑Disabled ♦ Enabled
♦ Disabled ❑Enabled
❑Disabled ♦ Enabled
❑Disabled ♦ Enabled
❑Standard ♦ Enhanced
♦ Standard ❑Enhanced
♦ Disabled ❑Enabled
♦ Disabled ❑Enabled
❑Disabled ❍Enabled
❑Disabled ❍Enabled
❑Disabled ❍Enabled
Top of Base Memory
♦ Disabled ❑Sparing ❑Mirroring
PCI Device, Embedded Ethernet 1 (LANCN2)
NX Memory Protection
USB 2.0 Host Controller
Advanced System Configuration
Device
Option ROM Scan
Latency Timer
PCI Device, Embedded LSI SCSI 1020
Compatible FPU Code
Ethernet on Board
CPU Thermal Management
CPU Halt Mode (C1E)
PCI Slot 2 Configuration
CPU Mismatch Detection
Hyper Threading
CPU Settings
PCI Device, Embedded Ethernet 2 (LANCN1)
PCI IRQ Configuration
PCI Slots Configuration
BIOS Work Space Location
Memory Redundancy
Split Lock operations
Adjacent Sector P refetch
Enhanced SpeedStep
USB 1.1 Host Controller
USB BIOS Legacy Support
Peripheral Configuration
Serial
Floppy Type
PCI Configuration
Diskette Controller
Mouse Controller
Serial Multiplexer
Parameters
Fast String operations
Ethernet on Board
PCI Slot 1 Configuration
PCI IRQ Line 0/VGA
A.2 BIOS Setup Utility Parameters
� Security menu
Setting
[Enter]
❑Disabled ❍Enabled
❍Off ❑On
Enter the time
❑Disabled ❍Enabled
❑Always OFF ❍Previous State ❑Always ON
❑Yes ❍No
♦ Disabled ❑Enabled
❑1.1 ♦ 1.4
❑Other ♦ DOS
Parameters
Power On/Off
Multiprocessor Specification
Large Disk Access Mode
Power On Source
LAN
Resume On Times
Resume Time
Reset Configuration Data
Secured Setup Configurations
Power Failure Recovery
Remote
Parameters Setting
Setup Password Displays the existence or nonexistence of a password
System Password Displays the existence or nonexistence of a password
Set Setup Password Set Setup password
Set System Password Set System password
Setup Password Lock ❍Standard ❑Extended
System Password Mode System
SETUP prompt ❑Disabled ❍Enabled
Virus Warning ♦ Disabled ❑Enabled
System Load ❍Standard ❑Diskette/CDROM Lock
Diskette Write ❑Disabled ❍Enabled
Flash Write ❑Disabled ❍Enabled
7
8
A Configuration Sheet
� Server menu
Setting
❍Disabled ❑Enabled
Mode ❍Continue ❑Reset ❑Power Cycle
Timeout value ❍0 ❑0-100 ( )
❍2 ❑1-30 ( )
♦ 5 ❑0-15 ( )
❍3 ❑0-7 ( )
♦ Disabled ❑Remote Image Disk ❑LAN
♦ Disabled ❑Enabled
❑Disabled ♦ Enabled
❑Disabled ♦ Enabled
❍5 ❑0-31 ( )
[Enter]
IPMI Specification Version Display IPMI Specification version
BMC Firmware Display BMC Firmware version
Clear System Event Log ❍Disabled ❑Enabled
Event Log Full Mode ❍Overwrite ❑Maintain
Existing Event Log number Display number of recorded logs
Remaining Event Log number Display number of remained recordable logs
System Event Log Display contents of the system event log
System Event Log (list mode) Display contents of the system event log in list mode
Realtime Sensor Data Display sensor data including temperature and voltage
[Enter]
CPU 0 Status ❑Failed ❑Disabled ❍Enabled
CPU 1 Status ❑Failed ❑Disabled ❍Enabled
[Enter]
DIMM A1 ❑Failed ❑Disabled ❍Enabled
DIMM A2 ❑Failed ❑Disabled ❍Enabled
DIMM A3 ❑Failed ❑Disabled ❍Enabled
DIMM A4 ❑Failed ❑Disabled ❍Enabled
DIMM B1 ❑Failed ❑Disabled ❍Enabled
DIMM B2 ❑Failed ❑Disabled ❍Enabled
DIMM B3 ❑Failed ❑Disabled ❍Enabled
DIMM B4 ❑Failed ❑Disabled ❍Enabled
[Enter]
Local IP Address Enter IP address
Subnet Mask Enter subnet mask
Gateway Address Enter gateway address
User ID 1 Password Not available for this server
[Enter]
Console Redirection Port ❍Disabled ❑Enabled
Port Serial
Media Type ❍Serial ❑LAN
Console connection ♦ Direct ❑Via modem
Baud Rate ❑300 ❑1200 ❑2400 ❍9600 ❑19.2K ❑38.4K ❑57.6K ❑115.2K
Protocol ❑VT100 ❑VT100, 8bit ❑PC-ANSI, 7bit ❑PC ANSI ❍VT100+ ❑VT-UTF8
Flow Control ❍None ❑XON/XOFF ❑CTS/RTS
Mode ❑Standard ❍Enhanced
LAN Settings
Clear Screen Delay (sec)
Memory Status
Console Redirection
Memory Scrub
Power Cycle Delay
IPMI
Parameters
CPU Status
ASR&R Boot Delay (min)
Boot Retry Counter
Diagnostic System
O/S Boot Timeout
BIOS runtime logging
Critical Temperature Monitoring
A.3 SCSI Setup Utility Parameters
A.3 SCSI Setup Utility Parameters
The marks used in each menu indicate:
❑: Parameters ❍ : Settings at time of purchase ♦: Unchangeable settings
� Boot Adapter List menu
� Global Properties menu
� Adapter Properties menu
� Device Properties Submenu
Setting
♦ 0
❍ON ❑OFFNext Boot
Boot Order
Parameters
Setting
❑No ♦ Yes
♦ Verbose ❑Terse
♦ Supported ❑All
❍Color ❑Monochrome
♦ Hook Interrupt, the Default ❑Bypass Interrupt hook
Pause When Boot Alert Displayed
Parameters
Boot Information Display Mode
Negotiate with devices
Video Mode
Support Interrupt
Setting
♦ 7 ❑0-15
♦ Low to High (0..Max) ❑High to Low(0..Max)
♦ None ❑Boot Drive Only ❑With Media Installed
♦ SCSI P lug and P lay Mupping
❑Alternate CHS Mapping
♦ 2 ❑1-15
♦ No ❑Yes
♦ Auto ❑off
Secondary Cluster Server
Termination Control
Host SCSI ID
Parameters
SCSI Bus Scan Order
Removable Media Support
CHS Mapping
Spinup Delay (Secs)
Setting
Not available for this server
❍160 ❑80 ❑40 ❑20 ❑10 ❑5 ❑0
Display maximum transfer speed supported by host adapter
♦ 16 ❑8
❍Yes ❑No
♦ Yes ❑No
♦ On ❑OFF
♦ 10
♦ On ❑OFF
MT/Sec
MB/Sec
Data Width
Scan ID
Restore Defaults
Parameters
Scan LUNS >0
Disconnect
SCSI Time out
Queue Tags
9
1
A Configuration Sheet
� RAID Properties Submenu
Setting
❑Yes (Array type/ Linux array type)
❑No (Other than Array type/Linux array type)
Not available for this server
Display hard disk status during disk array configuration
Display hard disk capacity
Status
Size(MB)
Hot Spare
Array Disk?
Parameters
0
A.4 System Resource Chart
A.4 System Resource Chart
The following charts list the I/O port addresses which can be selected for each expansion card.
� I/O port addresses
| | | | | | | | | | | | | | | | | | | | | | | |
Serial port | | | | | | | | | | | | | | | | | | | | | | | | BIOS setup
* indicate the I/O port address space that can be selected in the expansion card.
indicates that some or all of the 16 bytes that follow the marker address may be used
( space selected for default)
indicates that some or all of the 32 bytes that follow the marker address may be used
( space selected for default)
280 2C0100 140 180 1C0 400Product nameI/O port address (h)
Setup method300 340 380 3C0200 240
11
1
A Configuration Sheet
A.5 RAID Design Sheet
� Logical drive information
RAID
levelCapacity
1
1
1
Physical drive (CH=0 (fixed)
73.4GB (CH=0) ID= 0, 1,
(CH=0) ID= 0, 1,
(CH=0) ID= 0, 1,
2
B.1 RAID Wizard
B Design Sheet
When setting up the server using ServerStart, set the default values in advance to
ensure setup is performed smoothly.
B.1 RAID Wizard
Setting
❑ No RAID ❑ Automatic ❑ Manual
❑ Use existing array
RAID Controller ❑ Onboard SCSI array controller
Controller Number (Default - 0)
RAID Level ❑ RAID1
Number of Disks Number:
For manual and
auto settingExisting RAID Array ❑ Delete
For manual
setting
Configuration mode
For manual and
auto setting
Parameters
13
1
B Design Sheet
B.2 Disk Wizard
Parameters Setting
Controller Type ❑ RAID
Disk Number (Default - 0)
File System ❑ NTFS ❑ FAT
Quick Format ❑ Yes ❑ No
Label (Default - SYSTEM)
Partit ion Size ❑ Auto setting ❑ MB
Partit ion Usage ❑ BOOT ❑ OS ❑ DATA
File System ❑ NTFS ❑ FAT
Quick Format ❑ Execute ❑ Do not execute
Label (Default - DATA)
Partit ion Size ❑ Auto setting ❑ MB
Partit ion Usage ❑ BOOT ❑ OS ❑ DATA
File System ❑ NTFS ❑ FAT
Quick Format ❑ Execute ❑ Do not execute
Label (Default - DATA)
Partit ion Size ❑ Auto setting ❑ MB
Partit ion Usage ❑ BOOT ❑ OS ❑ DATA
File System ❑ NTFS ❑ FAT
Quick Format ❑ Execute ❑ Do not execute
Label (Default - DATA)
Partit ion Size ❑ Auto setting ❑ MB
Partit ion Usage ❑ BOOT ❑ OS ❑ DATA
Erase all existing partit ions on all displayed
disks❑ Delete
Make copies when installing multiple disks or more sheets are needed.
4
B.3 OS Wizard (Windows 2003 Install Wizard)
B.3 OS Wizard (Windows 2003 Install Wizard)
(continued)
Setting
❑ Windows Server 2003, Standard Edition
❑ Windows Server 2003, Enterprise Edition
❑ per Seat
❑ per Server
(Only when concurrent users are selected)
❑ a work group ❑ a domain
(Default - MYUSERGROUP)
❑ Install Operating System from Local CD
❑ Install Operating System from Remote Server
(Default -(GMT+01:00) Amsterdam, Berlin,
Bern, Rome, Stockholm, Vienna)
❑ Use Default ❑ Drive Letter
❑C: ❑ D: ❑ E: ❑ F: ❑ G: ❑ H: ❑ I: ❑ J: ❑K: ❑L: ❑ M: ❑ N:
❑O: ❑P: ❑ Q: ❑ R: ❑ S: ❑ T: ❑ U: ❑ V: ❑W: ❑ X: ❑ Y: ❑ Z:
❑ Use default ❑ Prompt User
❑ Specify now
(Default - \winnt)
❑ - - - -
❑ 640 * 480 ❑ 800 * 600 ❑ 1024 * 768
❑ 1156 * 864 ❑ 1280 * 1024 ❑ 1600 * 1200
❑ 60 ❑ 70 ❑ 72 ❑ 75 ❑ 80 ❑ 85 ❑ 100
❑ 16 colors ❑ 256 colors ❑ High Color (16bits)
❑ True Color (24bits) ❑ True Color (32bits)
Parameters
Install Windows 2003
Installation Directory and Time zone
Computer Identification
OS
License Mode
User permitted
will participate in
Workgroup or Domain Name
Password for Administrator account
Installation Directory
Remote Password
Organization
User Name
Display settings
Product-ID
User Name
Computer Name
BitsPerPel
Resolution
VRefresh
Time Zone
Installation Drive
Installation destination
When selecting drive name
When installing OS from remote server
User account to create computer account
Password
Remote Source Path
Remote Username
User account
Installation method
15
1
B Design Sheet
Copy to install multiple adapters.
(continued)
Setting
❑ Install Unattended
❑ Install Manually
❑ T CP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple T alk
❑ DLC ❑ NetMon ❑ PPT P
❑ Use DHCP
IP-Address
Subnet Mask
Default Gateway
IP-Address (additional) (only when added)
Subnet Mask (additional) (only when added)
Default Gateway (additional) (only when added)
DNS domain name (only when specified)
DNS server address (only when specified)
Use WINS ❑ Use
WINS server address DHCP (only when selected to use)
❑ Use NetBIOS sett ing from the DHCP Server
❑ Use NetBIOS over T CP/IP
❑ Do not use NetBIOS over T CP/IP
Internal network number 0x
Network number 0x
Packet T ype❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3
❑ Ethernet SNAP ❑ Auto-detect ion
❑ T CP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple T alk
❑ DLC ❑ NetMon ❑ PPT P
❑ Use DHCP
IP-Address
Subnet Mask
Default Gateway
IP-Address (additional) (only when added)
Subnet Mask (additional) (only when added)
Default Gateway (additional) (only when added)
DNS domain name (only when specified)
DNS server address (only when specified)
Use WINS ❑ Use
WINS server address DHCP (only when selected to use)
❑ Use NetBIOS sett ing from the DHCP Server
❑ Use NetBIOS over T CP/IP
❑ Do not use NetBIOS over T CP/IP
Internal network number 0x
Network number 0x
Packet T ype❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3
❑ Ethernet SNAP ❑ Auto-detect ion
Network protocol
Network protocol property (for install unat tended)
Installation method
Parameters
Only when NWIPX is selected
NetBIOS option
Connection name
Use of DHCP (T CP/IP selected)
Available protocols
D
o
n
o
t
u
s
e
D
H
C
P
A
d
a
p
t
e
r
1
D
o
n
o
t
u
s
e
D
H
C
P
NetBIOS option
Connection name
Use of DHCP (T CP/IP selected)
Only when NWIPX is selected
A
d
a
p
t
e
r
2
Available protocols
6
B.3 OS Wizard (Windows 2003 Install Wizard)
(continued)
Setting
❑ Install default Components
❑ Install customized Components
Accessories
❑ clipboard viewer
❑ Desktop Wallpaper
❑ Document Template
❑ Paint
❑ All available mousepointers
❑ Word pad
❑ Calculator
❑ Character Map
Accessibility Wizard ❑ Install
Communications❑ Chat
❑ Hyper Terminal
ASP.NET web development platform ❑ Install
Application server console ❑ Install
Internet information services (IIS)
❑ FrontPage 2002 Server Extensions
❑ FTP (File Transfer Protocol) service
❑ NNTP Service - NNTP Service
❑ SMTP Service - SMTP Service
❑ World Wide Web Server
- Internet Information Services ASP support
- Internet Information Services web DAV publishing
- World Wide Web (WWW) Service
- Internet Information Services internet data connector
- Internet Information Services web user interface
❑ Management Console - based administration tools for IIS
❑ Internet Information Services
Network COM + access ❑ Install
DTC network access ❑ Install
❑ Install
❑ Install
❑ Install
❑ Install
❑ Install ❑ Server components of the Certificate Services
❑ Web client component of the Certificate Services
❑ Install ❑ POP3 main service ❑ POP3 web user interface
(Default - \Inetpub\Ftproot)
(Default - \Inetsrv\WWWroot)
Software Components
WWW server directory
Parameters
Application and utilit ies
Application server
FTP site directory
Indexing Server Files
Select installation method
Only when selecting components to install
FTP service property (only when FTP service is selected)
WWW service property (only when WWW service is selected)
Terminal Services
Terminal Services licensing
Remote Installation Services
Certificate Service
POP3 root component
17
1
B Design Sheet
(continued)
Setting
❑ Permit remote desktop during unattended setup
❑ Access permit compatible with Windows 2000 Users
❑ Access permit compatible with Terminal Server 4.0 Users
❑ Number of simultaneous users
❑ Number of connected sessions
❑ Application server mode ❑ Remote management mode
❑ Services for Macintosh (SFM)
❑ Print Service for Macintosh
❑ Print Service for UNIX
❑ WINS Server
❑ Internet Authentication Service (IAS)
❑ MS DNS Server
❑ Simple TCP/IP Service
❑ MS DHCP Server
❑ Network Monitor tools
❑ SNMP Service (Required to install SNMP-ServerView)
❑ Send
❑ Receive
(only when specified)
❑ Physical ❑ Datalink and sub network
❑ End-to-End ❑ Application ❑ Internet
Parameters
Terminal service
License Mode
Current mode for terminal serevice
Authorize the following access permits to
terminal service users
Networking Services
Receive SNMP packet from all hosts
Trap
Security
Send authentication trap
Receivable community name
Community name
Trap destination
SNMP details (only when SNMP is selected)
Management and Monitoring Tools
Host name
Contact
Address
Agent
Service
Terminal server property (only when terminal server is selected)
Services
Other network file and Print Services
8
B.3 OS Wizard (Windows 2003 Install Wizard)
Setting
❑ Install
❑ Create a domain in a new forest
❑ Additional domain controller of the existing domain
❑ Create a new child domain under the existing domain tree
❑ Create a new domain tree in the existing forest
❑ Permit
Database folder
Active Directory type
Active Directory details setting (only when DNS is selected)
Parameters
Log folder
SYSVOL folder location
Install Active Directory
Complete DNS name of the new domain
Create a domain in a new forest (only when selected)
Compatibility with Windows 2000 or
earlier server OS
User name
Password
Domain
Additional domain controller of the existing domain (only when selected)
Domain NetBIOS name
Complete DNS name of the parent domain
New child domain name
Domain NetBIOS name
User name
Create a new domain tree in the existing forest (only when selected)
Password
Domain name
Complete DNS name of the new domain
Complete DNS name of the new domain
User name
Password
Domain
Create a new child domain under the existing domain tree (only when selected)
Domain NetBIOS name
19
2
B Design Sheet
B.4 OS Wizard (Windows 2000 Install Wizard)
(continued)
Setting
❑ Windows 2000 Server
❑ Windows 2000 Advanced Server
❑ per Seat
❑ per Server
(Only when concurrent users are selected)
❑ Work group ❑ Domain
(Default - MYUSERGROUP)
❑ Install the OS from the local CD
❑ Install the OS from the remote server
(Default - (GMT+01:00) Amsterdam, Berlin,
Bern, Rome, Stockholm, Vienna)
❑ Use default ❑ Drive name
❑ C: ❑ D: ❑ E: ❑ F: ❑ G: ❑ H: ❑ I: ❑ J: ❑ K: ❑ L: ❑ M: ❑ N:
❑ O: ❑ P: ❑ Q: ❑ R: ❑ S: ❑ T: ❑ U: ❑ V: ❑ W: ❑ X: ❑ Y: ❑ Z:
❑ Use Default ❑ Prompt User
❑ Specify now
(Default - \winnt)
❑ - - - -
❑ 640 * 480 ❑ 800 * 600 ❑ 1024 * 768
❑ 1156 * 864 ❑ 1280 * 1024 ❑ 1600 * 1200
❑ 60 ❑ 70 ❑ 72 ❑ 75 ❑ 80 ❑ 85 ❑ 100
❑ 16 colors ❑ 256 colors ❑ High Color (16bits)
❑ T rue Color (24bits) ❑ T rue Color (32bits)
Computer Name
Resolution
Product-ID
VRefresh
Remote Source Path
Remote Username
User Name
Organization
Remote Password
User Name
User account to create computer account (only when Domain is selected)
Installation Destination
Installation directory
When selecting drive name
Installation method
When installing OS from remote server
T ime Zone
Password
Installation Drive
User account
Parameters
Install Windows 2000
Installation Directory and Time zone
Computer identification information
License mode
OS
Password for Administrator
Number of simultaneous connection
Participation
Work group or domain name
Display settings
BitsPerPel
0
B.4 OS Wizard (Windows 2000 Install Wizard)
Copy to install multiple adapters.
(continued)
Setting
❑ Install Unattended
❑ Install Manually
❑ TCP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple Talk
❑ DLC ❑ NetMon ❑ PPTP
❑ Use DHCP
IP-Address
Subnet Mask
Default Gateway
IP-Address (additional) (only when added)
Subnet Mask (additional) (only when added)
Default Gateway (additional) (only when added)
DNS domain name (only when specified)
DNS server address (only when specified)
Use WINS ❑ Use
WINS server address (only when selected to use WINS)
❑ Use NetBIOS setting from DHCP server
❑ Enable NetBIOS over TCP/IP
❑ Disable NetBIOS over TCP/IP
Internal network number 0x
Network number 0x
Packet Type❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3
❑ Ethernet SNAP ❑ Auto-detection
❑ TCP/IP ❑ NWIPX ❑ NetBEUI ❑ Apple Talk
❑ DLC ❑ NetMon ❑ PPTP
❑ Use DHCP
IP-Address
Subnet Mask
Default Gateway
IP-Address (additional) (only when added)
Subnet Mask (additional) (only when added)
Default Gateway (additional) (only when added)
DNS domain name (only when specified)
DNS server address (only when specified)
Use WINS ❑ Use
WINS server address (only when selected to use WINS)
❑ Use NetBIOS setting from DHCP server
❑ Enable NetBIOS over TCP/IP
❑ Disable NetBIOS over TCP/IP
Internal network number 0x
Network number 0x
Packet Type❑ Ethernet II ❑ Ethernet 802.2 ❑ Ethernet 802.3
❑ Ethernet SNAP ❑ Auto-detection
NetBIOS option
Only when NWIPX is selected
NetBIOS option
Use of DHCP (When TCP/IP selected)
Connection name
A
d
a
p
t
e
r
1
Available protocols
D
o
n
o
t
u
s
e
D
H
C
P
Installation method
Connection name
A
d
a
p
t
e
r
2
Available protocols
D
o
n
o
t
u
s
e
D
H
C
P
Only when NWIPX is selected
Use of DHCP (When TCP/IP selected)
Network protocol
Network protocol property (for install unattended)
Parameters
21
2
B Design Sheet
(continued)
Sett ing
❑ Install default Components
❑ Install customized Components
❑ (IIS) common component
❑ (IIS) online help
❑ FT P (File T ransfer Protocol) server
❑ Internet service manager (HT ML)
❑ Internet information service snap-in
❑ NNT P Service
❑ SMT P Service
❑ WWW (World Wide Web) server
❑ Remote install service
❑ Remote storage
❑ T erminal Services
❑ T erminal Services licensing
❑ T erminal Services client creator file
❑ Indexing Server Files
❑ COM Internet service proxy
❑ FrontPage 2000 Server Extensions
❑ Cert ificate Service
❑ Web client component of the Cert ificate Services
❑ Server components of the Cert ificate Service
(Default - \Inetpub\Ftproot)
(Default - \Inetsrv\WWWroot)
❑ Hyper T erminal ❑ Dialler
❑ Chat ❑ Message queue service
❑ Other network file and print service
❑ CD player ❑ Medial player
❑ Utopia sound set t ing ❑ Sound recorder
❑ Volume control ❑ Sample sound
❑ Accessibility set t ing wizard ❑ Character Map
❑ Calculator ❑ Paint
❑ Word pad ❑ Document T emplate
❑ Script debugger ❑ Object packager
❑ Desktop Wallpaper ❑ Mousepointers
❑ Free cell ❑ Mine sweeper ❑ P inball ❑ Solitaire
❑ Simple Network Management Protocol (SNMP)
❑ Domain Name System (DNS)
❑ Dynamic Host Configurat ion Protocol (DHCP)
❑ Windows Internet Name Service (WINS)
❑ Simple T CP/IP service
❑ Network monitor tool
❑ Internet authenticat ion service
❑ Site Server ILS service
❑ Print service for UNIX
❑ Print service for Macintosh
❑ Connect ion manager component
❑ File service for Macintosh
Parameters
WWW server directory
Services
Select installat ion method
Software Components
FT P site directory
Only when select ing component to install
Communicat ions
Mult imedia
Game
Accessories
Service
Service
2
B.4 OS Wizard (Windows 2000 Install Wizard)
Setting
❑ Send
❑ Receive
(only when specified)
❑ Physical ❑ Datalink and sub network
❑ End-to-End ❑ Application ❑ Internet
❑ Install
❑ Create a new forest of a domain tree
❑ Add additional domain controller of the existing domain
❑ Add a new child domain under the existing domain tree
❑ Place a new domain tree in the existing forest
❑ Permit
Parameters
Active Directory type
Trap
Security
Agent
SNMP details (only when SNMP is se lected)
Domain NetBIOS name
Parent domain name
Child domain name
Domain NetBIOS name
Complete DNS name of the new tree
Domain NetBIOS name
User name
Password
Complete DNS name of the domain
Domain
Add a new child domain under the existing domain tree (only when selected)
Place a new domain tree in the existing forest (only when selected)
User name
Password
Domain name
Complete DNS name of the new tree
Domain
User name
Password
Add additional domain controller of the existing domain (only when selected)
Trap destination
Send authentication trap
Receivable community name
Install Active Directory
Active Directory details setting (only when DNS is se lected)
Access permit compatibility with
Windows 2000 or earlier server
SYSVOL folder location
Database location
Log location
Create a new forest of a domain tree (only when selected)
Contact
Service
Community name
Receive SNMP packet from all hosts
Address
Host name
23
2
B Design Sheet
B.5 Application Wizard
Setting
❑ Windows 2000 service pack
❑ ServerView
❑ DSNAP
(only when selecting additional software)
❑ Install selected application from Local CD
❑ Install selected application from Remote Server
❑ Install ❑ Do not install
Remote Resource Path
Remote Username
Remote Password
When installing from remote server
Parameters
Installation method
Installable applications
Userspecific Command
4
C Accident Sheet
Name(Product ID)
OS
For optional configuration and settings, use Configuration Sheet in the section A.
Phase of accident
DATE/TIME
LAN/WAN config.
Environment
PRIMERGY RX200 S2 (PG )
What did you do?, what message? etc.
Attached paper Yes/No
25
• The contents of this manual may be revised without prior notice.
• Fujitsu assumes no liability for damages to third party copyrights or other rights
arising from the use of any information in this manual.
• No part of this manual may be reproduced in any form without the prior written
permission of Fujitsu.
PRIMERGY RX200 S2
Configuration Sheets
B7FH-3051-02ENZ0-00
Issued on
Issued by
August, 2005 FUJITSU LIMITED
Top Related