ABB Control Inc.
AC 1035
A-Line contactorsA145 – A300
CUS T O M E R F I R ST
QUA L I T Y. . . A LWAY S!
Registered by UL toISO 9002
1ABB Control Inc.
AC
1035 — 10/1999 Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
A-Line contactorsA145 – A300
This catalog is published for information purposes only and is not all inclusive. For additional information on products or technicalinformation, consult ABB Control Inc. The installation and use of ABB Control Inc. products should be in accordance with theprovisions of the U.S. National Electrical Code and/or other local codes or industry standards that are pertinent to the particularend use. Installation or use not in accordance with these codes and standards could be hazardous to personnel and/or equipment.
General information
• Table of contents ............................................... II
• Alphanumeric price guide .......................... III – IV
Pricing and selection, A145-A300 ............................. 4
Accessories .......................................................... 5 - 7
Technical data ...................................................... 8 - 9
Terms & Standard compliance & approvals ..... 15 - 16
A14
5 -
A30
0A
cces
sori
esTe
chn
ical
dat
a
Approximate dimensions .................................. 10 - 13D
imen
sio
ns
Gen
eral
info
rmat
ion
Term
s
2 ABB Control Inc.
AC
103
5 —
10/
1999
Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Table of contents
Subject Product category Page no. Subject Product category Page no.
Gen
eral info
rmatio
n
AAC operated contactor coil .................................................................................. 7Across the line contactors .................................................................................... 4Adapter plates ...................................................................................................... 7Approximate dimensions ............................................................................... 10-13Auxiliary contact blocks ....................................................................................... 5
CCable connectors ................................................................................................. 6Connection bars ................................................................................................... 6Connection strips ............................................................................................. 6, 7Connectors, cable ................................................................................................ 6Contact blocks, auxiliary ...................................................................................... 5Contact sets, main ............................................................................................... 7Contactor coil, AC operated ................................................................................. 7
Contactors, across the line .................................................................................. 4
DDe-ionizing plates ................................................................................................. 7
MMain contact sets ................................................................................................. 7Mechanical interlocks ........................................................................................... 5
Mounting kits, T450 overload relay ..................................................................... 5
Mounting screws, self tapping ............................................................................. 7
OOverload relay mounting kits, T450 ..................................................................... 5
Overload relays .................................................................................................... 5
RRelays, overload .................................................................................................. 5
SSelf tapping mounting screws .............................................................................. 7Standard compliance & approvals ..................................................................... 16
Surge suppressors ............................................................................................... 5
TT450 overload relay mounting kits ...................................................................... 5TA200 terminal shroud ......................................................................................... 5Technical data ................................................................................................... 8-9Terminal enlargements ........................................................................................ 7Terminal extensions ............................................................................................. 7Terminal shroud fro TA200 .................................................................................. 5
Terms & conditions ............................................................................................ 15
3ABB Control Inc.
AC
1035 — 10/1999 Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Alphanumeric price guide1SFN110401R1000 to ZW300
Catalog price informationList prices shown in this publication supersede all previouslypublished documentation and are subject to change withoutnotice.
Alphanumeric referenceThis above alphanumeric reference is an extract of AC 5030,Alphanumeric Reference, which contains all products sold byABB Control Inc.AC 5030 is available on disk for Windows and Macintosh as aMicroSoft Excel 5.0 document. An ASCII text version of thedata is also included for use in other spreadsheet and data-base applications.
Gen
eral
info
rmat
ion
Catalog List Disc. Avail. Pg. Catalog List Disc. Avail. Pg. Catalog List Disc. Avail. Pg. Catalog List Disc. Avail. Pg.number price sched. code no. number price sched. code no. number price sched. code no. number price sched. code no.
1SFN110401R1000 $10.00 ABA A 7A145-30-00-84 $785.00 AEA A 4A145-30-11-84 $825.00 AEA A 4A145-30-22-84 $865.00 AEA A 4A185-30-00-84 $1,250.00 AEA A 4
A185-30-11-84 $1,290.00 AEA A 4A185-30-22-84 $1,330.00 AEA A 4A210-30-00-84 $1,595.00 AEA A 4A210-30-11-84 $1,635.00 AEA A 4A210-30-22-84 $1,695.00 AEA A 4
A260-30-00-84 $1,775.00 AEA A 4A260-30-11-84 $1,815.00 AEA A 4A260-30-22-84 $1,855.00 AEA A 4A300-30-00-84 $1,835.00 AEA A 4A300-30-11-84 $1,875.00 AEA A 4
A300-30-22-84 $1,915.00 AEA A 4ATK185 $45.00 ABA A 6ATK300 $68.00 ABA A 6ATK300/2 $110.00 ABA A 6BEA185/S3/S4 $60.00 ABA A 6
BEA300/S5 $75.00 ABA A 6BED145A $250.00 ABA A 6BED185 $290.00 ABA A 6BED210 $375.00 ABA A 6BED300 $500.00 ABA A 6
BEMA185-30 $260.00 ABA A 6BEMA300-30 $470.00 ABA A 6BESA185-30 $130.00 ABA A 6BESA300-30 $200.00 ABA A 6CAL5-11 $30.00 ABA A 5
CAL5-11B $30.00 ABA A 5DT450/A185 $225.00 ABA A 5DT450/A300 $225.00 ABA A 5LP185 $20.00 ABA A 6LP300 $30.00 ABA A 6
LT185-AC $10.00 ABA A 6LT185-AL $10.00 ABA A 6LT200A185 $90.00 ABA A 5LT300-AC $10.00 ABA A 6LT300-AL $10.00 ABA A 6
LW185 $120.00 ABA A 7LW300 $130.00 ABA A 7LX185 $90.00 ABA A 7LX300 $140.00 ABA A 7LYA185 $90.00 ABA A 7
LYA300 $140.00 ABA A 7PR145-1 $20.00 ABA A 7PR210-1 $20.00 ABA A 7PR300-1 $20.00 ABA A 7RC5-2/133 $30.00 ABA A 5
RC5-2/250 $30.00 ABA A 5RC5-2/440 $30.00 ABA A 5RC5-2/50 $30.00 ABA A 5TA200DU110 $165.00 TC A 5TA200DU135 $225.00 TC A 5
TA200DU150 $225.00 TC A 5TA200DU175 $225.00 TC A 5TA200DU200 $225.00 TC A 5TA200DU90 $165.00 TC A 5TA450DU185 $488.00 TCT A 5
TA450DU235 $488.00 TCT A 5TA450DU310 $488.00 TCT A 5TA450SU105 $525.00 TCT A 5TA450SU140 $525.00 TCT A 5TA450SU185 $713.00 TCT A 5
TA450SU235 $713.00 TCT A 5TA450SU310 $713.00 TCT A 5TA450SU60 $525.00 TCT A 5TA450SU80 $525.00 TCT A 5VM300H $110.00 ABA A 5
VM300V $180.00 ABA A 5ZA185 $150.00 ABA A 7ZA300 $180.00 ABA A 7ZL145 $300.00 ABA A 7ZL185 $420.00 ABA A 7
ZL210 $525.00 ABA A 7ZL260 $855.00 ABA A 7ZL300 $1,020.00 ABA A 7ZW185 $130.00 ABA A 7
ZW300 $180.00 ABA A 7
Availability code legendA – Stock to 2 weeksB – 1 to 2 weeksC – 2 to 4 weeksD – 4 to 6 weeksE – Call for deliveryNA – Not available, consult factory
4 ABB Control Inc.
AC
103
5 —
10/
1999
Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Across the line contactorsA145 – A300
A145-30-11 A300-30-11
Coil voltage selectionAll catalog numbers include a 120VAC coil. To select other coil voltages,substitute the code from the "Coil voltage selection" chart for the two digits afterthe last dash in the catalog number.
Ex.: A 240V coil is required for an A145-30-11 contactor: A145-30-11-80
HzCntr Voltstype 12 24 48 110 120 125 208 220 240 277 380 415 440 480 500 600
60 A 81 83 84 84 34 75 80 42 86 86 51 53 5550 A 81 83 84 80 85 86 55
Coil voltage selection chart
UL rated
0 0 A145-30-00-84 $ 785230 40 50 100 125 1 1 A145-30-11-84 825
2 2 A145-30-22-84 865
0 0 A185-30-00-84 1250250 50 60 125 150 1 1 A185-30-11-84 1290
2 2 A185-30-22-84 1330
0 0 A210-30-00-84 1595300 60 75 150 200 1 1 A210-30-11-84 1635
2 2 A210-30-22-84 1695
0 0 A260-30-00-84 1775350 75 100 200 250 1 1 A260-30-11-84 1815
2 2 A260-30-22-84 1855
0 0 A300-30-00-84 1835400 100 100 250 300 1 1 A300-30-11-84 1875
2 2 A300-30-22-84 1915
Discount schedule AEA
Standard
UL Maximum motor horsepower ratings auxiliary contacts AC operated
general purpose 200 – 208VAC 220 – 240VAC 440 – 480VAC 550 – 600VAC N.O. N.C. Catalog Listcurrent number price
A145 - A
300
5ABB Control Inc.
AC
1035 — 10/1999 Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Accessories
For Setting range Catalog Listcontactor A number price
Discount schedule ABA – AccessoriesDiscount schedule TC – TA200 OLRDiscount schedule TCT – TA450 OLR
Mounting kits for T450 overload relaysCatalog List
For contactor number price
Terminal shroud for TA200Catalog List
For contactor number price
Catalog ListFor contactor number price
Auxiliary contact blockCatalog List
Description number price
Mechanical interlock for vertical mounted contactorsCatalog List
For contactor number price
Surge supressors, type RC — for contactors A145 – A300
A145 – A185 LT200A185 $ 90
A145 – A185 DT450/A185 $ 225A260 – A300 DT450/A300
TA450DU/SU
CAL5-11
VM300
RC5-2___
Normal starting time class 10 65 – 90 TA200DU90 $ 16580 – 110 TA200DU110
A145 – A185 100 – 135 TA200DU135110 – 150 TA200DU150 225130 – 175 TA200DU175150 – 200 TA200DU200
Normal starting time class 10 130 – 185 TA450DU185A210 – A300 165 – 235 TA450DU235 488
220 – 310 TA450DU310
Long starting time class 30 40 – 60 TA450SU6055 – 80 TA450SU80 52570 – 105 TA450SU105
A145 – A300 95 – 140 TA450SU140
130 – 185 TA450SU185165 – 235 TA450SU235 713220 – 310 TA450SU310
Catalog ListVoltage AC number price
First block: left and right, 1 N.O. & 1 N.C., for contactors A145 – A300 CAL5-11 $ 30Second block: second left and right, 1 N.O. & 1 N.C., for contactors A145 – A300 CAL5-11B
Mechanical interlock for horizontal mounted contactors — for left and right contactor
A110 – A300 VM300H $ 110
A110 – A300 VM300V $ 180
24 – 50 RC5-2/5050 – 133 RC5-2/133 $ 30
110 – 250 RC5-2/250250 – 440 RC5-2/440
Acc
esso
ries
Overload relays
6 ABB Control Inc.
AC
103
5 —
10/
1999
Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Wire For Catalog Listrange contactor number price
Terminal shrouds — two pieces
A145 – A185 for cable connectors LT185-ACA145 – A185 for compression lugs LT185-AL $ 10A210 – A300 for cable connectors LT300-ACA210 – A300 for compression lugs LT300-AL
Connection bars for reversing contactors — six barsCatalog List
For contactor number price
Connection bars for phase to phase — three barsCatalog List
For contactor number price
S3 – S4 A145 – A185 BEA185/S3/S4 $ 60S5 A210 – A300 BEA300/S5 75
Catalog ListWire range For contactor number price
A145 – A185 BESA185-30 $ 130A210 – A300 BESA300-30 200
Connection bars for star-delta starters — seven barsCatalog List
Contactors line and delta Star number price
Connection strips 2 pole — two pieces
A145 A110 BED145 $ 250A185 A145 BED185 290A210 A185 BED210 375A260 A210 BED300 500A300 A210 BED300 500
LT185-AC
LT185-AL
BEM185-30
BEA185/S3/S4
LP185
Accessories
Cable connectors for Al and Cu cables — set of three
6 – 250MCM A145 – A185 ATK185 $ 454 – 400MCM A210 – A300 ATK300 68
(2) 4 – 500MCM A210 – A300 ATK300/2 110
A145 – A185 BEMA185-30 $ 260A210 – A300 BEMA300-30 470
A145 – A185 LP185 $ 20A210 – A300 LP300 30
Catalog ListFor contactor number price
Catalog ListFor contactor number price
Connection bars between contactor and MCCB — three bars
Accesso
ries
Discount schedule ABA
7ABB Control Inc.
AC
1035 — 10/1999 Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Accessories
Connection strips — 3 poleCatalog List
For contactor number price
A145 – A185 LYA185 $ 90A260 – A300 LYA300A 140
Terminal extensions — 3 pole deviceCatalog List
For contactor number price
A145 – A185 LX185 $ 90A260 – A300 LX300 140
Terminal enlargements — 3 pole device, same width as EH terminalsCatalog List
For contactor number price
A145 – A185 LW185 $ 120A210 – A300 LW300 130
Main contact setsCatalog List
For contactor number price
De-ionizing plates — six piecesCatalog List
For contactor number price
Adapter plates — to replace EH contactorsCatalog List
For contactor number price
Replace EH100 or EH145 with A145 PR145-1Replace EH150 – EH210 with A185 – A210 PR210-1 $ 20Replace EH250 – EH300 with A260 – A300 PR300-1
Catalog ListFor contactor number price
A145 – A300 1SFN110401R1000 $ 10
LY185
LX185
ZL145
ZW185
ZA185
PR145-1
1 Four mounting screws (not self-tapping) M5 x 70) come with the contactor
Self tapping mounting screw (M5 x 70, set of 100)1
A145 – A185 ZW185 $ 130A210 – A300 ZW300 180
A145 ZL145 $ 300A185 ZL185 420A210 ZL210 525A260 ZL260 855A300 ZL300 1020
AC operated contactor coilCatalog List
For contactor number price
A145 – A185 ZA185 $ 150A210 – A300 ZA300 180
Note: for coil code see page 4
Acc
esso
ries
Discount schedule ABA
8 ABB Control Inc.
AC
103
5 —
10/
1999
Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Technical data
{
M3
M3
Techn
ical data
Type A145 A185 A210 A260 A300
NEMA ratingsNEMA size 4 — — 5 —NEMA cont. amp rating (thermal) 135 — — 270 —NEMA max. HP rating (3PH) 200V 40 — — 75 —
230V 50 — — 100 —460V/575V 100 — — 200 —
UL / CSA dataContinuous ampere rating A 230 250 300 350 400Motor rating 3-phase 208V HP 40 50 60 75 100
240V HP 50 60 75 100 100460/480V HP 100 125 150 200 250575/600V HP 125 150 200 250 300
Insulation characteristics
Rated insulation voltage Uiaccording to IEC 947-4-1 and VDE 0110 (Gr. C) V 1000according to UL/CSA V 600
Rated impulse withstand voltage Uimp. 8 kV
Main pole utilization characteristics
Rated operational voltage Ue V 1000
Conventional free-air thermal current Ithacc. to IEC 947-4-1, open contactors q ≤ 40°C A 250 275 350 400 450with conductor cross-sectional area mm2 120 150 185 240 300
Rated operational current Ie/AC-1 for air temperatureclose to contactor
q ≤ 40°C A 250 275 350 400 450q ≤ 55°C A 230 250 300 350 400q ≤ 70°C A 180 180 240 290 325
with conductor cross-sectional area mm2 120 150 185 240 300
Utilization category AC-3 for air temperatureclose to contactor max. 55°CRated operational current Ie/AC-3
220 – 230 – 240 V A 145 185 210 260 3053-phase motors 380 – 400 V A 145 185 210 260 305
415 V A 145 185 210 260 300 440 V A 145 185 210 240 280500 V A 145 170 210 240 280690 V A 120 170 210 220 280
Rated operational power AC-3 220 – 230 – 240 V kW 45 55 59 80 90
1500 rpm – 50Hz 380 – 400 V kW 75 90 110 140 1601800rpm – 60Hz 415 V kW 75 90 110 140 1603-phase motors 440 V kW 75 90 110 140 160
500 V kW 90 110 132 180 200690 V kW 110 132 160 200 250
Max. mechanical switching frequency cycles/h 3600 3600 3600 3600 3600Max. electrical switching for AC-1 cycles/h 300 300 300 300 300frequency for AC-3 cycles/h 300 300 300 300 300
for AC-4 cycles/h 150 150 150 150 150
Rated making capacity AC-3 12 x Ie AC-3Rated breaking capacity AC-3 8 x Ie AC-3
Short-circuit protection for contactorswithout thermal O/L relays – Motor protection excludedUe ≤ 500 V a.c. – gG (gl) type fuses A 315 355 400 500 500
Rated short-time withstand current Icw 1 s A 1800 2000 2500 3500 3500at 40°C ambient temp., in free air, 10 s A 1200 1500 1700 2400 2400from a cold state 30 s A 800 1000 1200 1500 1500
1 min A 600 800 1000 1100 110015 min A 280 320 400 500 500
Heat dissipation per pole Ie/AC-1 W 13 16 18 25 32Ie/AC-3 W 5 8 9 14 18
Maximum short circuit rating, UL/CSAMCP Amps/kA @ 480V 400 / 85 400 / 85 800 / 85 800 / 85 800 / 85MCP Amps/kA @ 600V 400 / 35 400 / 35 800 / 35 800 / 35 800 / 35Fuse Amps/kA @ 600V 400J / 200 400J / 200 600J / 200 600J / 200 600J / 200
9ABB Control Inc.
AC
1035 — 10/1999 Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Technical data
Magnet system characteristicsType A 145 A 185 A 210 A 260 A 300
Coil operating limits acc. to IEC 947-4-1: 0.85 – 1.1 x Uc max 70°C
Drop-out voltage in % of Uc roughly 45 – 65 %
Coil consumptionAverage pull-in value 50 Hz VA 550 550 1350 1350 1350
60 Hz VA 600 600 1550 1550 155050/60 Hz VA/VA 700/650 700/650 1700/1550 1700/1550 1700/1550
Average holding value 50 Hz VA/W 35/11 35/11 60/16 60/16 60/1660 Hz VA/W 40/12 40/12 65/19 65/19 65/1950/60 Hz VA/W 44/13 44/13 80/21 80/21 80/21
Rated control circuit voltage Ucat 50 Hz V 24 – 690 24 – 690 24 – 690 24 – 690 24 – 690at 60 Hz V 24 – 600 24 – 600 24 – 600 24 – 600 24 – 600
Operating time Between coil energization and:N.O. contact closing ms 13 – 27 13 – 27 17 – 35 17 – 35 17 – 35N.C. contact opening ms 8 – 22 8 – 22 12 – 30 12 – 30 12 – 30
Between coil de-energization and:N.O. contact opening ms 5 – 10 5 – 10 7 – 13 7 – 13 7 – 13N.C. contact closing ms 9 – 13 9 – 13 10 – 16 10 – 16 10 – 16
Approximate weightContactor lbs 7.10 7.10 13.0 13.0 13.0Starter lbs 9.11 9.11 17.67 17.67 17.67
Tech
nic
al d
ata
10 ABB Control Inc.
AC
103
5 —
10/
1999
Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Approximate dimensionsA145 - A300 contactors
A145, A185
A210, A260, A300
00.0000.00
InchesMillimeters
Dim
ensio
ns
4.13105
Ø 0.328.2
1.3835
7.72196
8.94227
0.195
1.4035.5
0.6917.5
7.36187
6.30150
6.50165
1.3835
DRILL & TAP 10-24( TYP 4 )
4.39111.5
1.7243.75
12.11307.5
5.51140
8.62219
0.195
1.4035.5
7.36187
DRILL & TAP 10-24( TYP 4 )
Ø 0.4010.2
0.6917.5
1.7243.75
7.11180
8.94227
11ABB Control Inc.
AC
1035 — 10/1999 Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Approximate dimensionsA145 & A185 mechanically interlocked contactors
A145, A185 with mechanical interlock
A210, A260, A300 with mechanical interlock
00.0000.00
InchesMillimeters
Dim
ensi
on
s
8.94227
0.195
1.7244
7.36187
6.60168
6.50165
1.3835
9.60244
9.97253
5.31135
4.99127
r = 0.1564
0.4010
0.4211Ø 0.312
8
Ø 0.3128
9.17233
r = 0.2506
7.36187
1.7244
6.69170
12.2310
6.5165
r = 0.1564 r = 0.250
6
0.4010
12.11307.5
8.62219
0.195
1.7244
0.4010Ø 0.312
8
Ø 0.3128
13.00330
7.3926
13.00330
12 ABB Control Inc.
AC
103
5 —
10/
1999
Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Approximate dimensionsA145 & A185 starters
A145 – A185 + TA200
A145 – A185 + TA450SU
00.0000.00
InchesMillimeters
Dim
ensio
ns
1.3835
0.6917.5
6.50165
For M5
For M5
1.0426.5
3.2282.0
1.9750.0
1.4637.0
0.195
1.4035.5
7.36187
6.30150
12.34313.5
4.96126
0.154
2.4462
0.246
0.266.5
0.4712
4.13105
0.7318.5
1.3835
1.3835
6.49165
7.71196
7.36187
4.39111.5
Ø 0.328.2
12.16309
1.6542
0.7920.0
0.4311.0
1.6542
Ø 0.328.2
0.5514.0
12.99330
4.84123
0.266.5
642
0.4712
4.13105
0.7318.5
1.3835
1.3835
7.71196
6.49165
7.71196
7.36187
4.39111.5
7.60193
2.2858
2.2858
1.7344 0.69
17.5
0.3910.0
0.123
Ø 0.328.2
For M5
1.3835
0.6917.5
6.50165
2.0251.5
2.1755.0
0.8020.5
0.8020.5
2.9976.0
For M5
For M5
12.87327
14.49368
0.195
1.4035.5
7.36187
6.30150
6.81173
0.246
1.8146
13.05331.5
6.48164.5
0.195
13ABB Control Inc.
AC
1035 — 10/1999 Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Approximate dimensionsA210 - A300 starters
00.0000.00
InchesMillimeters
Dim
ensi
on
s
A210 – A300 + TA450DU/SU
1.7243.75
0.6917.5
2.5063.5
2.1755
0.6316.1
0.6316.1
3.0076
7.36187
For M5
For M5
14.29363
6.81173
1.8146
0.195
0.236
7.10180.5
1.4035.5
0.195
642
5.51140
0.4712
0.4712
Ø 0.4010.2
1.7243.75
1.7243.75
8.62219
14.17360
7.36187
8.94227
7.38187.5
7.59193
0.5514
2.2958
2.2958
1.7344
0.5514
0.113
0.7920
Ø 0.328.2
For M5
15.81402
14 ABB Control Inc.
AC
103
5 —
10/
1999
Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Notes 00.0000.00
InchesMillimeters
Dim
ensio
ns
15ABB Control Inc.
AC
1035 — 10/1999 Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Terms & conditions
These terms and conditions govern all sales and shipments of control equipment products(including parts and accessories).ABB Control Inc. hereby gives notice of its objection to any different or additional terms andconditions except for such as may be expressly accepted by it in writing.
PricesPrices are subject to change without notice. Prices will be the prices in effect at the time ofshipment by ABB Control Inc. and include freight, prepaid and allowed to first destination in thecontinental United States. In the event of a price change, the effective date of the change will bethe date shown on the new price discount sheets. However, where a price change is made byletter or telegram, the effective date will be given as part of the announcement.
TaxesThe price does not include any Federal, state or local property, license, privilege, sales, use,excise, gross receipts or other like taxes which may now or hereafter be applicable. Payment byABB Control Inc. of any such taxes shall be for the account of purchaser.
Standard Terms of PaymentStandard terms of payment are according to the appropriate discount schedule (AC 5000 - AC5002).
Payment and Late ChargesABB Control Inc. may require full or partial payment in advance if, in its sole judgement, thefinancial condition of the purchaser, at any time prior to delivery, does not merit the terms ofpayment specified.
If shipments are delayed by the purchaser or by reason of any of the causes referred to in theparagraph entitled "Excusable Delay", payments shall become due from the date when ABBControl Inc. is prepared to make shipment. Products held for the purchaser as a result of suchdelay shall be at the risk and expense of the purchaser.
If the purchaser fails to pay any invoice when due, ABB Control Inc. may defer deliveries underthis or any other contract with purchaser, except upon prior receipt of satisfactory security foror cash in payment of any such invoice. Failure on the part of purchaser to pay invoices whendue shall at the option ofABB Control Inc. constitute a default under this contract.
A service charge, the lesser of the highest rate allowed by law or 11/2% per month, or fractionthereof, for a maximum charge of 18% per annum will be charged on all overdue accounts.
DeliveryDelivery of products shall be FOB point of shipment regardless of transportation costs being"allowed", "prepaid" or collect". Where the scheduled delivery of products and parts is delayed bythe purchaser or by reason of any of the causes referred to in the paragraph entitled ExcusableDelay, ABB Control Inc. may deliver such products by moving them to storage for the account ofand at the risk of the purchaser. Shipping dates are approximate and are based upon promptreceipt of all necessary information from purchaser. ABB Control Inc. reserves the right to makedelivery in installments.
Purchaser Pick-upNo allowance will be made in lieu of transportation charges if the purchaser accepts shipment atthe factory, warehouse or freight station. Transportation charges will not be deducted from thepurchase price.
Origin, Method of Shipment and RoutingABB Control Inc. shall determine the point of origin of shipment, the method of transportation andthe routing of shipment. Costs for shipment by means requested by purchaser different from ABBControl Inc.'s standard means of shipment are invoiced to the purchaser as a separate charge.
Freight charges will be added to the price of any order under $100.
Excusable DelayABB Control Inc. shall not be liable for loss, damage, detention or delay, nor be deemed to be indefault from causes beyond its reasonable control, including without limitation, fire, flood, strike orother labor difficulty, act or omission of any governmental authority or of the purchaser,insurrection or riot, embargo, delays or shortage in transportation or inability to obtain necessarylabor, materials or manufacturing facilities from usual sources.In the event of delay in performance due to any such cause, the date of delivery will bepostponed by such length of time as may be reasonably necessary to compensate for the delay.
WarrantyABB Control Inc. warrants that on date of shipment to purchaser, the goods will be the kind andquality described herein, merchantable and free of defects in workmanship and material.
If within one year from date of initial operation, but not more than eighteen months from date ofshipment, should any failure to conform with this warranty appear within such time, ABB ControlInc. shall, if given prompt notice by purchaser, correct such nonconformity, at its option, either byrepair or replacement F.O.B. repair facility or by refund of the purchase price of thenonconforming product or part. Return of products to ABB Control Inc. pursuant to this paragraphshall be at purchaser's risk and expense. The foregoing warranty is exclusive and in lieu of allother warranties of quality, expressed or implied, and all other warranties, including any warrantyof merchantability or fitness for a particular purpose are hereby disclaimed.
Correction of nonconformities in the manner and for the period of time provided above shall bepurchaser's exclusive remedy and shall constitute fulfillment of all liabilities of ABB Control Inc.whether in warranty, strict liability, contract, negligence, tort or otherwise with respect to anynonconformance or defect in the product.
The foregoing warranty shall not apply to any product which has been: a) improperly repaired oraltered, b) subjected to misuse, misapplication, negligence or accident, c) used in a mannercontrary to manufacturer's directions.
Limitation of LiabilityABB Control Inc.'s liability to purchaser on any claim in connection with the product shall notexceed the purchase price of the product which gives rise to the claim.
IN NO EVENT SHALL ABB CONTROL INC. BE LIABLE FOR SPECIAL, INCIDENTAL ORCONSEQUENTIAL DAMAGES whether in warranty, contract, strict liability, tort, negligence or
otherwise including but not limited to loss of profits or revenue, loss of use of the product or anyassociated product, cost of capital, cost of substitute products, facilities or services, downtimecosts or claims of customers of the purchaser for such or other damages.
Except as prohibited by law, all causes of action against ABB Control Inc. shall expire unlessbrought within one year of the time of accrual thereof. ABB CONTROL INC. NEITHER ASSUMESNOR AUTHORIZES ANYONE TO ASSUME FOR IT ANY OTHER OR FURTHER LIABILITYTHAN AS SET OUT ABOVE.
Patent IndemnityABB Control Inc. will at its own expense defend any suit which maybe brought against the Purchaser based on a claim that any apparatus or part furnished undercontract constitutes an infringement of any United States letter patent (provided ABB Control Inc.is notified promptly of such suit and copies of all papers therein are delivered to ABB ControlInc.), and ABB Control Inc. agrees to pay all judgements and costs recovered in any such suitand to reimburse the Purchaser for costs of expenses incurred in the defense of any such claimor suit. In case said apparatus or any part is held to constitute infringement and the use of theapparatus or part is enjoined, ABB Control Inc. shall at its own expense, either procure for thePurchaser the right to continue using the apparatus or part or replace it with non-infringingapparatus; or modify it so it becomes non-infringing, or remove the apparatus and refund thepurchase price and the transportation and installation cost thereof. The foregoing states the entireliability of ABB Control Inc. for patent infringement by apparatus or any part thereof.
Shipping loss or damageIn the event of shipping loss or damage: 1) Notification must be given to ABB Control Inc. within72 hours of delivery; 2) Written notice of apparent loss or damage must be made on the carrier'sdelivery receipt; and 3) Concealed damage must be immediately reported to the deliveringcarrier with a request for inspection. Purchaser shall comply with the foregoing procedurewhether or not ABB Control Inc. has the risk of loss at the point of loss or damage to theshipment.
Title – risk of lossThe products sold hereunder shall remain the property ofABB Control Inc. and shall remain personal property until fully paid for in cash, and purchaseragrees, if requested by ABB Control Inc. to execute a further security agreement covering theproducts sold, and to perform all acts which may be necessary to perfect and assure retention oftitle to such products by ABB Control Inc. Not withstanding any agreement with respect todelivery terms, risk of loss or damage shall pass to the purchaser and delivery shall be deemedto be complete upon delivery to a private or common carrier or upon moving into storage,whichever occurs first, at the point of shipment.
TerminationAny order or contract may be terminated by the purchaser only on written notice and uponpayment of reasonable and proper termination charges, including without limitation, all costsidentified to the order of contract incurred by ABB Control Inc. up to the date of notice oftermination and all charges incurred by ABB Control Inc. in respect of the termination.
ReturnsIn no event will ABB Control Inc. be responsible for unauthorized return of products. Returns willbe accepted only at ABB Control Inc.'s option and subject to terms specified by ABB Control Inc.Authorization and shipping instructions for return of products must be obtained from ABB ControlInc. prior to return shipment. Product must be returned with proper identification. When apurchaser requests authorization to return for his own reasons, the return is subject to a minimumrestocking charge of 20% for standard inventoried product and for any transportation paid by ABBControl Inc., both out and ingoing. Returns will be accepted up to 60 days after invoice date.Goods returned for purchaser's reason are subject to inspection and must be in good workingcondition, as new, and in original cartons.
Purchase ordersExcept as provided below, all orders must be in writing and show quantities and prices, completedescription (including catalog numbers) of products requested and mutually agreed deliverydates.
Verbal orders received via telephone or otherwise must be confirmed within 5 days either by mail,telex or the equivalent. Verbal orders with a purchase price over $5,000 will not be processeduntil such written confirmation is received.
Unless otherwise agreed in writing, an addition to a previously entered order will be acceptedonly at then applicable prices, discount schedules, conditions of sale, etc.
Special quotationsSpecial quotations will automatically expire 30 days from issuance unless renewed in writing byABB Control Inc.
AssignmentAny assignment of this contract, or any rights hereunder, without prior written consent of ABBControl Inc. by a duly authorized representative thereof shall be void.
Partial invalidityIf any provisions herein or portions thereof conflict with any statute or rule of law of thejurisdiction of applicable law or wherein the contract may be sought to be enforced, then suchprovisions or portions thereof shall be deemed void to the extent that they may so conflict, butwithout invalidating the remaining portions of such provisions or other provisions hereof.
RemediesThe remedies expressly provided for in the Conditions of Sale shall be in addition to any otherremedies which ABB Control Inc. may have under the Uniform Commercial Code or otherapplicable law.
Choice of lawThe construction and performance of this contract and the rights and remedies of the partieshereto shall be governed by the laws of the State of Texas.
Term
s
16 ABB Control Inc.
AC
103
5 —
10/
1999
Table of contents: pg 2 Alphanumeric: pg 3 Selection: pg 4 Accessories: pgs 5 – 7 Tech data: pgs 8 – 9 Dimensions: pgs 10 – 13
Standard compliance and approvals
VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC 947 UL489 CSAC22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC 947 UL489CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC 947UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120 IEC947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF 120IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752 NCF120 IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2 BS4752NCF 120 IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN 60947-2BS4752 NCF 120 IEC 947 UL489 CSA C22.2 VDE 0660 CEI EN60947-2 BS4752 NCF 120 IEC 947 UL489 CSA C22.2 VDE 0660
Within the European Union, EU,conformity of products and the properapplication of the CE marking tomachines and control equipment isnecessary for marketing electricalequipment. The intent is to ensurecompliance with all relevant EUDirectives.
ABB Low Voltage ApparatusABB is a global group serving customersin electric power generation,transmission and distribution, industrialbuilding systems, and rail transportation.ABB Low Voltage Apparatus develops,produces and markets low voltageproducts such as disconnect switches,
contactors,starters,pushbuttons,soft starters, arcguard systems,relays, mini-contactors,manual motorstarters, IsomaxMCCBs, and
MCBs. With six manufacturing unitswithin the European Union, we areideally located to develop, manufactureand provide low voltage equipment tocomply with the EU directive.
BackgroundThe guarantee of free trade of goodswithin the Community is the mostimportant objective. This will eliminatetrade restrictions that result fromdifferent technical regulations in eachindividual member country.Harmonization of existing Europeanstandards and regulations, is beingaccomplished and already partiallyrealized. Based on this goal, a newconcept for creating directives wasformed in 1985 by the EuropeanCommunity (EC) Commission to producedirectives with a wide range ofapplication which contain only the mostbasic safety requirements.
The CE MarkThe CE mark is prescribed by law andassures the European free trade ofgoods. It is short for “CommunautéEuropéen”, and is displayed on goodsand/or packaging which acts as anexternal symbol for the inspection ofproducts. It also illustrates themanufacturer’s responsibility to upholdthe community’s directives.
Worldwide approvals1
The CE Mark
1 Approvals listed may not apply to products listed in this publication.
ABB´s commitment tothe directivesABB Low Voltage Apparatus producingcompanies will attach the CE mark inaccordance with the product directives.Our products will conform as follows:• Declarations of conformity for ABB
products will be available whenrequired by the relevant EU directives.
• Those products required to do so willbear CE marking as specified by therelevant EU directives and CE markingregulations.
• Necessary technical documentationwill be on file and made available toauthorized organizations upon writtenrequest.
Industrial controls• Contactors• Drive contactors• Welding contactors• Overload relays• Starters, open & enclosed• Manual motor starters• Softstarters• Control relays• Pilot devices• Miniature controls• Control circuit transformers• Sensors• Arc Guard systems
Circuit protectivedevices• Fusible disconnect switches• Non-fusible disconnect switches• Enclosed disconnect switches• Molded case circuit breakers• Miniature circuit breakers• Megamax & Emax power
circuit breakers (IEC)
Low VoltageNetwork QualityPower factor correction• Individual capacitors• Fixed capacitor banks• Automatic capacitor banksHarmonics correction• Anti-resonance capacitor banks• Filter banks• Dynacomp
L O W V O L T A G EN E T W O R K Q U A L I T Y
Product scope
ABB Control Inc.1206 Hatton RoadWichita Falls, TX 76302Tel. 888-385-1221
940-397-7000Fax 940-397-7001Email [email protected] www.abb.com/usa/abbcontrol
AC 1035October, 1999
Top Related