2Agenda
• Introductions• GoCart/Cart3D Background• Sample Problem 1: A320 Sweeps
– Analysis Setup: Geometry & Flight Conditions– Results– Post-Processing in Chorus: Plotting sweeps
• Sample Problem 2: Surface Deflection– Analysis Setup– Post-Processing in Chorus: Generating Response Surface
Welcome!
• About Tecplot Inc.– Founded in 1981 in Bellevue WA
(Near Seattle)– 50,000 users across the world– 100 Academic Site Licenses
• About Me– UCLA and University of Utah– Mobusho Fellow Osaka University– Post doc at University of WA– 14 first author publications– 100s of talks on Tecplot
4Janet Zhen Bio
• M.S. Mechanical Engineering – Fluid dynamics and biofluidics– Deformation of elastomeric channels
• Desktop Aeronautics– Product Manager for software– Applications Engineer for support
• NASA Ames Research Center– Small Sats for Space Biology– Send E. Coli into space
• Northrop Grumman – CFD analyst for Trident II underwater
missile launching system
5Introduction
Desktop Aeronautics– Founded in 1994 and purchased by Aerion Corporation in 2012– Currently a 12 person company located in Palo Alto, CA– Licensed distributors of NASA’s Cart3D
Analysis Tool Background
• Cart3D is CFD analysis tool developed by NASA Ames
Research Center and the Courant Institute at NYU– Cartesian Euler code that generates mesh for arbitrarily complex geometries
– Scalable and can be run in batch mode
• GoCart is the GUI that wraps around Cart3D executables– Users can import CAD geometry, build a Cartesian volume mesh, run the flow solver,
and view the results in the post processor within minutes
• Typical Applications: – Propulsion-Airframe Integration and Optimization
– Aircraft Conceptual Design
– Extended Formation Flight
– Launch Vehicle Analysis
– Sonic Boom Prediction
– Fly-back Boosters
Effects of Jet-Interaction on Pitch Control of a Launch Abort Vehicle. M. Aftosmis and S. Rogers AIAA 2008-1281.
Cart3D can be used to rapidly generate thousands of analysis cases
7Example Problem 1: A320 Sweeps
• Objective– Analyze Airbus A320 at different Mach and Alpha sweeps to
determine drag polar– Run flow analysis for 0.5<M<0.85 at increments of 0.5 for
3.5<alpha<6.0 at increments of 0.5
8Analysis Setup
• Import A320 step file into GoCart
• Build computational mesh• Run initial analysis to
check out grid and flow solver settings
• Set up sweeps for varying Mach # and Alphas: Total of 80 cases
9Results
• GoCart calculates CD and CL for each case• Tecplot solution files (cutPlanes.dat and Components.i.dat) files are
generated• GoCart plots contours from a single run
12Example Problem 2: Surface Deflection Study
Objective:
Use GoCart to simulate simple takeoff and landing scenario and characterize response surface of rolling moment at various angles of attack for multiple aileron configurations at low Mach number
13Problem Setup
• Bring in geometry to GoCart and rotate outer aileron• Run alpha sweep at different aileron angles
15
Results Viewed in Chorus
• Kriging model applied to angle of attack and angle of the aileron to visualize Cy
16Questions?
www.desktop.aeroJanet [email protected]
www.tecplot.comDurrell [email protected]
Thank you for joining us!
Top Related