DIY Horizontal Bar Balustrade System
DIY Vertical Bar Balustrade System
DIY 10mm Glass Balustrade System
DIY Prefabricated Staircase System
April 2011
www.stallionstainless.com.au
INTRODUCING:The Revolutionary Stallion Stainless
DIY Range Of Staircases & Balustrades
CS1 - Curved Saddle
FS1 - Flat Saddle HT 12.7mm - Hollow Tubeavailable in 304 and 316 grade
BHS - Bar Holder (Square Post)
BHR - Bar Holder (Round Post)
BHCE - Closed End Bar HolderNo bullet end needed
RPD-980 - Round PostRPD-900 - Round PostSPD-980 - Square PostSPD-900 - Square Post
BE 12.7mm - Bullet End
What is the Stallion Stainless Steel DIY Balustrade System?
It is our new range of ready-to-go posts and accessories for balustrades in a 316 Stainless Steel Satin Finish.
Where can it be used?
Both inside and outside of your home. 316 Stainless Steel is the best corrosion resistant steel available, particularly when used outside or in coastal locations. Like all products that are subject to the outside elements, if they are not regularly maintained they will deteriorate in appearance. Productscan be applied to prevent deterioration can be found at most good hardware stores.
DIY Horizontal Bar Balustrade System
DIY Vertical Bar Balustrade System
Installation Guide at www.stallionstainless.com.au
FREE SHIPPING
AUSTRALIA
WIDE
DIY VERTICAL BAR BALUSTRADE SYSTEM
FS1 - Flat Saddle
P1 - Patented Adjustable Pivot Arm To Suit 12.7mm Square Tube
P2 - Patented Adjustable Pivot Arm To Suit 38.1mm Square Tube
ST 38.1mm - Square Tube(1.2mm wall)
SPD-980 - Square PostSPD-900 - Square Post
Adjustable pivots are � exible up to 38 degrees
ST 12.7mm - Square Tube(1.2mm wall)CS1 - Curved Saddle
• 2 styles of posts available• 40mm Square Post for top mounting• 50mm Round Post for top mounting
(cover plate supplied)• No welding or gluing required for the posts; they are
ready straight out of the box to fi x to the stair • Posts are available in 2 set lengths; 1 for the rake and
1 for the level. Length is measured from the bottom of the post to the top of the saddle (when fi tted)
• The saddle (the part the handrail fi ts to) can be adjusted to suit any angle and even more
importantly can be removed to make the fi xing of the handrail easier
• 2 different balustrade options are available that can be fi tted to the posts
• Glass Clamps for both the square and round posts to suit 8mm and 10mm glass
• Horizontal Bars, the holders (for both square and round posts) and bullet ends
• All parts are kept in stock for immediate delivery• Recently upgraded design• Heavy duty cast saddles• 4 fi xings to base plate
NEW!
PATENTED DESIGNThis is the latest vertical DIY balustrade system. It has been developed to accommodate the issue associated when you have a balcony or void area higher than 4 metres. This DIY system is currently only available with square posts and is only available in 316 certifi ed satin fi nish.
What are the key features and benefi ts of the Stallion range?
DIY Vertical Bar Balustrade System
Installation Guide provided upon request
FREE SHIPPING
AUSTRALIA
WIDE
DIY 10mm Glass Balustrade System
GC1 - 8-10mm Rubber Glass Clamp (Round Post)CS1 - Curved Saddle
Double wrapped, Waterproof packaging used to avoid scratching.
GC2 - 8-10mm Rubber Glass Clamp (Square Post)FS1 - Flat Saddle
RPD-980 - Round PostRPD-900 - Round PostSPD-980 - Square PostSPD-900 - Square Post
This system is also available in a Stainless Steel mirror fi nish. Just Released!
Please Note: Raking custom angle panels require MDF templates usually made by local glass suppliers. ie - Viridian.
Toughened Clear Glass Sizes In Stock10mm 850×1500 10mm 850×85010mm 850×1450 10mm 850×80010mm 850×1400 10mm 850×75010mm 850×1350 10mm 850×70010mm 850×1300 10mm 850×65010mm 850×1250 10mm 850×60010mm 850×1200 10mm 850×55010mm 850×1150 10mm 850×50010mm 850×1100 10mm 850×45010mm 850×1050 10mm 850×40010mm 850×1000 10mm 850×35010mm 850×950 10mm 850×30010mm 850×900 10mm 850×250
Frosted or translucent glass can be ordered upon request
Installation Guide provided upon request
FREE SHIPPING
AUSTRALIA
WIDE
DIY Prefabricated Staircase System
Beams come in options: RHS 200mm x 100mmx 6m or 200mm x150mm x 6m
Setting out stairs ready for welding
Stairs being positioned and lifted with block & table
Stairs awaiting packagingand delivery to Sydney
Plates cut to size & drilled
Products are re-checked prior to shipping
A fully welded system ready to be disassembled
Stairs awaiting packaging and delivery to Melbourne
Stumps cut to angle & length
Heavy duty mig welding.
Stairs all etch primed and packaged ready to ship locally or interstate.
Stairs awaiting packaging and delivery to Tasmania
Stairs all etch primed and packaged
Stairs awaiting packagingStairs awaiting packaging Stairs awaiting packaging Stairs awaiting packaging Stairs awaiting packaging
These staircases are usually packaged pre-fi tted ready for delivery inter-state or regional WA. To pre-make these staircases, it is very simple and all that is needed is a basic sketch and the dimensions. In some instances, we can arrange for the dimensions to be measured by our skilled tradespeople to ensure a high quality and accurate product is manufactured.
The Process Of Manufacturing Our Prefabricated Stairs
We Manufacture To Suit Requests And Drawings Sent From All Over Australia. Free Shipping!
Custom-Made For Easy Installation
Treads getting glued up on a press machine
Malaysian Cherry Treads
We custom make all timber treads in our own factory, using 3 different timbers to match existing timber fl oors or other timberwork
Victorian Ash Treads
Fully adjustable to suit any angle or height.
Treads getting cut to size
Jarrah TreadsMalaysian Cherry Treads Victorian Ash TreadsVictorian Ash Treads
Treads getting sanded
Jarrah Treads
Some recently completed DIY assemblies that are being further developed by our team...
Some recently completed jobs done with steel stringers and glass treads...
These modern steel and glass staircases can add that extra touch of elegance to any entrance, home or workplace. The specially made glass treads allow the transfer of light through the stairs and can provide an atmospheric and open design.
Stainless Steel & Timber Handrails
Timber Handrails: Suitable For Internal Use.
Our timber handrails can be made from a variety of different timbers. These range from standard timbers such as Jarrah, Victorian Ash or Malaysian Cherry up to exotic species such as American Oak or Marri.
Each timber handrail is unique and built to fi t your taste and budget.
Stainless Steel Handrails
Stainless Steel handrails can be used in both mirror or satin fi nish. The most common size is 50mm round railing.
Handrails can be supplied in a sand fi nish, however we also offer high quality single packed spray fi nish lacquer.
49mm Round Handrail and 49mm Round with Flat Base
Elliptical Handrail70mm x 43mm
Stallion Stainless is expanding quickly across Australia, Recently having had huge success at the Melbourne Home show.
Stallion Stainlesss - Setting The Standards in the Staircase Industry Across Australia.
Head Offi ce (Perth)Ph: 08 9458 2646 Fax: 08 9356 2082Mob: 0417 966 [email protected] Morgan Street, Cannington WA 6107
Melbourne Offi ceMob: 0431 487 [email protected]
OPENING HOURS
Mon-Thur 7.30am - 4.00pmFriday 7.30am - 2.00pmSaturday By Appointment
www.stallionstainless.com.au
Stallion Stainless is the � rst Australian staircase company which specialises in both stainless steel and timber all combined in one factory.
When you contact our Stallion Stainless head of� ce you won’t be passed onto a sales person. You will be dealing directly with the owner of the company.
Paul Taddei Phone: +61 8 9458 2646Mobile: +61 0417 966 807
Other Products...
Custom Balustrade & Staircases
DIY Stainless Steel Fittings
DIY Stainless Steel Pool Fittings
Screws & Fasteners
Staircases In Many Styles
Top Related