co
mm
erc
ial
co
nst
ruc
tio
np
rod
uc
t g
uid
e
2018
australian edition
to the ramsetreid Commercial Construction Product Guide. This
publication contains basic details of ramsetreid products relevant to
the Commercial Construction sector, which includes multi-story commercial
buildings, apartments, hospital and health, government and institutional
buildings, sports and recreation, transport infrastructure etc.
welcomeramsetreid provide a wide variety of connection solutions including both cast-in and post-installed, making ramsetreid the ideal one-stop-shop for construction connections.
If you are involved in on-site construction such as, pre-cast concrete erection, in-situ formwork and concreting, steel erection or fitting out with internal linings, plumbing, power, data etc, this is the right Product Guide for you.
The basic information in this document will assist to select and place orders for the right size and part number of ramsetreid products.For more detailed technical and application information, please consult ramsetreid Product Catalogues.
For detailed design and engineering information consult ramsetreid Design Guides and Specifier Resource publications.
These documents may be obtained by visiting the Ramset and Reid websites or contacting ramsetreid customer service. Details are on the back page of this Product Guide
commercial construction
pro
du
ct
gu
ide
| 2
018
4 product guide | commercial construction
contentRamset™ Direct Fixing Tools & Accessories 5
Gas Technology Tools 6CableMaster™ 800 TrakFast™ 800 InsulFas™ GT3 TrakFast™
Gas Technology Accessories 8
Gas Pins & Fuel Cells 9
Electrical & Plumbing Contractor Packs 11
Direct Fixing Tools 12FrameBoss™ FrameMaster™ FormMaster™ TyMaster™
Powder Actuated Tool Accessories 14
Drive Pins & Power Loads 15
Ramset™ Power Tools & Accessories 18
DynaDrill™ Rotary & Demolition Hammers 19DynaDrill™ 522 DynaDrill™ 529 DynaDrill™ 533 DynaDrill™ 544 DynaDrill™ 566 DynaDrill™ 585 DynaDrill™ 611
Carbide Bits & Chisels 22U3™ Plus Carbide R3™ Carbide R3™ Plus Carbide D3™ Plus Carbide U3™ Max Carbide R3™ Max Carbide D3™ Max Carbide R3™ Plus Chisels R3™ Max Chisels Accessories
Diamond Drilling & Cutting Range 25Diamond Core Drilling Kit Diamond Core Bits – Wet Diamond Dry Cutting Machine Diamond Drilling Accessories Industrial Angle Grinders Wet & Dry Vacuum Diamond Cutting Blades Diamond Cup Wheels Cut Off Wheels
Lithium-Ion Cordless Range 2818 V Cordless Rotary Hammer 18 V Cordless Hammer Drill / Driver 18 V Cordless Angle Grinder 18 V Cordless Impact Wrench 18 V Compact Cordless Impact Driver 18 V Cordless ChemSet™ Applicator 18 V Batteries & Chargers Impact Sockets
Ramset™ Mechanical Anchoring 31
Extreme Anchoring for Design Specification 32SpaTec™ Plus Safety Anchors TruBolt™ Xtrem™ Stud Anchor Sammy™ Seismic Anchor Tapcon™ Seismic Anchor
Heavy Duty Anchoring 33TruBolt™ Stud Anchors Boa™ Coil Anchors WERCS™ AnkaScrew™ Anchors AnkaScrew™ Anchors DynaBolt™ Anchors DynaSet™ Drop-In Anchors TruFast™ Push-Pull Anchors ShureDrive™ Anchors Electrical Support Fixings RamPlugs™ Nylon Anchors EasyDrive™ Anchors Plastic Plugs
Light Duty Anchors 40Concrete Nails Hollow Wall Anchors WallMate™
Ramset™ Chemical Anchoring 41Anchoring Adhesives 42ChemSet™ 101 Plus Polyester UltraFix™ Plus Polyester ChemSet™ 801 Xtrem™ Vinyl Ester ChemSet™ Reo 502™Pure Epoxy Epcon™ C8 Xtrem™ Pure Epoxy ChemSet™ Maxima™ Capsules
Chemical Anchor Threaded Studs & Fixings 43
Applicators & Installation Accessories 45
Ramset™ Construction Chemicals 46Sealants 47Roof Seal™ Silicone Water Seal™ Silicone HiSeal™ Polyurethane Gap Seal BlazeBrake™ FR Sealant
Sealant Accessories 47
Construction Adhesives 48NailFree™ Construction Adhesive Safe-T-Bond™ Water Clean Up Construction Adhesive
Self-Expanding Foams 48FomoFill™ FomoPlus™ Fomo™ Solvent Cleaner BlazeBrake™ FR Foam
Concrete Repair 49Epoxy Paste 1210 Epoxy Grout 7042
Cementitious Grout 49Premier Grout MP UltraFix™ Concremate™
Concrete Additives 49Cemcrete™
Reid™ Reinforcing Solutions 50
Rebate Systems 51ReidBar™ Poly Board ReidBox™ ReBox™ Pull Out Box
ReidBar™ System & Components 54ReidBar™ Starter Bars ReidBar™ Couplers ReidBar™ to Metric Couplers ReidBar™ Inserts ReidBar™ Nut ReidBar™ Domed Plate and Washers
ReidBar™ Accessories 57
ReidBar™ Formwork and Bracing Systems 58ReidBar™ Formwork System ReidBar Wing Nut ReidBrace™ RapidBrace™
Reid™ Cast-In Metric Connection Systems 61Metric Ferrules OrbiPlate™
Reid™ Concrete Lifting Accessories 63SwiftLift™ Edge Lift Clutches SwiftLift™ Clutches for SwiftLift™ Headed Anchors Swift™ Shims Accessories
product guide | commercial construction 5
direct fixing tools and accessories
Ramset™ Gas Technology & Powder Actuated tools are used by many professional contractors in Australia and around the world including ceiling and partitioning contractors, insulation installers, electrical contractors, plumbing contractors, pest control installers and formwork contractors.
The Ramset™ Gas Technology System employs the latest technology to fasten to concrete, steel and other common building materials. These revolutionary gas technology systems are extremely fast, cost effective and include automatic power adjustment for greater ease of use.
6 product guide | commercial construction
DIRECT FIXING TOOLS AND ACCESSORIESGAS TECHNOLOGY TOOLS
CableMaster™ 800
Features & Benefits• Battery Gauge – Helps avoid
running out of battery power.• Fuel Cell Gauge – Always know
when to change fuel cells.• Lithium Battery – Fast Charge, Long Life• Tool-less Depth of Drive Adjustment• Power Saving Technology – isolates
battery when tool is not in use
• Compact design with 20 pin magazine – Allows the tool to fit in tight spaces
• Easily removable fastener guide and magazine• Greater tool clearance – Allows the tool
to fit in close to edge applications.• Removable Support Leg – Ensures tool is at
90° to work surface for optimum fixings• Electronically controlled fuel injection – Consistent
power in a wide temperature range.
DescriptionThe RamsetTM CableMasterTM 800 is the most technologically advanced gas tool on the market. The CableMasterTM 800 offers a number of innovative features allowing quicker, safer installation of a wide variety of clips for plumbing, data and electrical installations. The speed at which the CableMasterTM 800 is able to perform installations provides tremendous savings in total installed cost.
Item Code Impact Energy Magazine Capacity Weight Pin Capacity
CABLEMASTER800 82J 20 Pin 3.8kg 15-40mm
TrakFast™ 800
Features & Benefits• Massive 100J power – Consistent fixings even
in extreme applications.• 50 pin magazine – Reduces downtime in
loading the magazine• Battery Gauge – Helps avoid running out of
battery power.• Fuel Cell Gauge – Always know when to
change fuel cells.• Lithium Battery – Fast Charge, Long Life• Tool-less Depth of Drive Adjustment
• Power Saving Technology – isolates battery when tool is not in use
• Optional 20 pin magazine for tight spaces.• Easily removable fastener guide and magazine• Greater tool clearance – Allows the tool to fit in
close to edge applications.• Greater track clearance – Allows the tool to fit
in deep track, up to 57mm.• Removable Support Leg – Ensures tool is at
90° to work surface for optimum fixings• Electronically controlled fuel injection –
Consistent power in a wide temperature range.
DescriptionWith the largest capacity magazine in its class, the Ramset™ TrakFast™800 offers large volume users tremendous savings in time and money. The Ramset™ TrakFast™800 delivers a massive 100J of impact energy allowing quick and safe installation of partitioning track, formwork systems and pest control mesh. The Ramset™ TrakFast™800 is a robust tool that features all of the latest Ramset™ innovations in smart gas tool technologies.
Item Code Impact Energy Magazine Capacity Weight Pin Capacity
TRAKFAST800 100J 50 Pin 3.9kg 15-40mm
DIRECT FIXING TOOLS AND ACCESSORIES
product guide | commercial construction 7
InsulFast™ GT3
Features & Benefits• The fastest insulation fixing system• Virtually no recoil!• 3 times less cocking force required
than explosive powered tools• Faster install than explosive powered
tools - lower in place cost• Automatic power adjustment• Fixes to concrete and steel without
the need for adjustment
• Compatible with all major insulation types• Low insertion force• Textured face for compatibility
with rendering applications• Sizes to suit soft and rigid insulation
from 25mm to 100mm• Soft insulation with thickness greater
than 100mm may be compressed.
DescriptionThe fastest insulation fixing system! This gas technology system provides effortless overhead fixing of insulation with virtually no recoil. The low tool compression force enhances user comfort.
Item Code Impact Energy Magazine Capacity Weight Pin Capacity
T3IF 100J N/A 3.5kg 25-100mm Insulation Pins
TrakFast™
Features & Benefits• Increased durability and reliability• Off position to prevent draining the
battery when tool is not in use• Cordless - self powered, no
set up time required • Sequential actuation - safe operation • Tool automatically resets piston
• Narrow nose and profile to reach inside deep leg track
• Soft cushioned grip • Carrying case• Well balanced• Mechanical fuel injection • Low maintenance
DescriptionFor fast installation of partitioning and track, use the Ramset™ TrakFast™ gas tool to provide high volume repetitive fixing into a range of building materials.
Item Code Impact Energy Magazine Capacity Weight Pin Capacity
TF1200 77J 40 Pin 3.8kg 13-38mm
DIRECT FIXING TOOLS AND ACCESSORIES
NOTES:
Item Code Description Pack Qty
TrakFast™ 800 / CableMaster™ 800
018545 Lithium Battery - TrakFast™ 800 / CableMaster™ 800 1 018546 Battery Charger (includes power supply) 1 018543 20 Pin Magazine 1 018544 50 Pin Magazine 1 014641 Magnetic Washer Adaptor - TrakFast 800 1
CableMaster™ 800 PULSALIFT800 Pole tool to suit CableMaster™ 800 only 1 CM800CRADLE Cablemaster™ 800 Cradle only, V4-3 PulsaLift™ 800 Pole with Trigger 1 V4-3 3ft PulsaLift™ 800 Pole with Trigger 1 V4-EXT 3ft PulsaLift™ 800 Pole extension 1
TrakFast™ / InsulFast™ GT3
B0092 Battery - TrakFast (TF1200) 1 B0020 Battery Charger - TF1200 (requires power supply) 1 TFPS Battery Charger Power Supply (TF1200) 1
TrakMaster™
TMBP Battery - TrakMaster / CableMaster / InsulFastGT2 1 TMBC Battery Charger (requires power supply) 1 TMBCPS Battery Charger Power Supply 1 337700 Fastener Guide - TrakMaster 1
CableMaster™
TMBP Battery - TrakMaster / CableMaster / InsulFastGT2 1 TMBC Battery Charger (requires power supply) 1 TMBCPS Battery Charger Power Supply 1 336800 Fastener Guide - CableMaster 1
TrakFast™ - TF1100
B20542 Battery - TrakFast - TF1100 1 TFBC Battery Charger - TrakFast TF1100 (requires power supply) 1 TMBCPS Battery Charger Power Supply 1
Common Accessories
B20544L Gas Tool Degreaser / Lubricant 1
DIRECT FIXING TOOLS AND ACCESSORIES
8 product guide | commercial construction
GAS TECHNOLOGY ACCESSORIES
ACCESSORIES TO SUIT MAGNETIC WASHER ADAPTOR
Item Code Shank Length (mm) Pack Qty
011204 25mm Washers 1000
CM800CRADLE
DIRECT FIXING TOOLS AND ACCESSORIES
product guide | commercial construction 9
GAS PINS AND FUEL CELLS
Item Code Shank Length (mm) Pack Qty
P8C620 20 500
P8C625 25 500
P8C630 30 500
P8C635 35 500
TRAKFAST800 / CABLEMASTER800 PINS & FUEL PACKS - STANDARD DUTY
Item Code Shank Length (mm) Pack Qty
C620 20 500
C625 25 500
C630 30 500
C635 35 500
TRAKMASTER / CABLEMASTER PINS & FUEL PACKS - STANDARD DUTY
Item Code Desc, Shank Length (mm) Pack Qty
P8HC615 Heavy Duty Steel/Concrete - 15mm 500
P8HC617 Premium Hard Concrete & Steel 17mm 500
P8HC622 Premium Hard Concrete & Steel 22mm 500
TRAKFAST800 / CABLEMASTER800 PINS & FUEL PACKS HEAVY DUTY FOR STEEL AND HARD CONCRETE
Item Code Desc, Shank Length (mm) Pack Qty
P8PLY138 Hard Steel Spiral Knurled Pins (TRAKFAST800) 1000
SPIRAL KNURLED PINS FOR FIXING PLYWOOD TO STEEL
Item Code Desc, Shank Length (mm) Pack Qty
HC615 Heavy Duty Steel/Concrete - 15mm 500
HC617 Premium Hard Concrete & Steel 17mm 500
HC622 Premium Hard Concrete & Steel 22mm 500
TRAKMASTER / CABLEMASTER PINS & FUEL PACKS HEAVY DUTY FOR STEEL AND HARD CONCRETE
DIRECT FIXING TOOLS AND ACCESSORIES
10 product guide | commercial construction
TRAKFAST PINS (TF1200, TF1100) & FUEL PACKS - STANDARD DUTY
GAS PINS AND FUEL CELLS
Item Code Shank Length (mm) Pack Qty
FPP012 13 1000
FPP034B 19 1000
FPP100 25 1000
FPP114 32 1000
TRAKFAST PINS (TF1200, TF1100) & FUEL PACKS - HEAVY DUTY
Item Code Shank Length (mm) Pack Qty
FPP012S 13 1000
FUEL PACKS
Item Code Description Pack Qty
TFGAS TrakFast Fuel Cell Pack 6
P700GAS Pulsa 700 Fuel cell - CableMaster / TrakMaster 1
INSULFAST GT3 (T3IF) FASTENERS
Item Code Description Length Pack QtyT3IG625 White 25mm 400T3IG625B Black 25mm 400T3IG625G Grey 25mm 400T3IG638 White 38mm 350T3IG638G Grey 38mm 350T3IG650 White 50mm 300T3IG650B Black 50mm 300T3IG663 White 63mm 500T3IG675 White 75mm 250T3IG675B Black 75mm 250T3IG6100 White 100mm 200
NOTES:
DIRECT FIXING TOOLS AND ACCESSORIES
product guide | commercial construction 11
ELECTRICAL AND PLUMBING CONTRACTOR FIXING PACKS
Item Code Item Code Description Pack Qty CableMaster 800 CableMaster
P8CPGCL CPGCL Contractor Pack - ClipElec + Hard Conc. Pins 22mm 500 P8CPGCLHC617 CPGCLHC617 Contractor Pack - ClipElec + Hard Conc. Pins 17mm 500 P8CPGDLHC617 CPGDLHC617 Contractor Pack - DataLec Clip + Hard Conc. Pins 17mm 500 P8CPGDLHC622 CPGDLHC622 Contractor Pack - DataLec Clip + Hard Conc. Pins 22mm 500 P8CPGCH Contractor Pack - Double CableHorn 125 P8CPGCT CPGCT Contractor Pack - CTCLIP 500 P8CPGDAS20 C/Pack - Direct Align H/saddle 20mm 400 P8CPGDAS25 C/Pack - Direct Align H/saddle 25mm 400
P8CPGFP04 Contractor Pack - FP FireFixTM 8 to 9.5mm 500 P8CPGTRH Contractor Pack - Threaded Rod Brkt. 400 P8CPGCWB CPGCWB Contractor Pack - Catinary Wire Brkt. 400
* Contractor Packs contain electrical clips, pins, fuel cells and cable ties where applicable.
ClipElec™
DataLec Clip™
Double CableHorn™
Single CableHorn™
Saddle™
FP FireFix™
Catinary WireBracket™
Threaded RodHanger™
CABLEMASTER & CABLEMASTER 800 ELECTRICAL CLIPS
Item Code Description Pack Qty
SPMW Strap & Plate Mounting Washer 500
* While stocks last
DIRECT FIXING TOOLS AND ACCESSORIES
DIRECT FIXING TOOLS AND ACCESSORIESPOWDER ACTUATED FIXING TOOLS
FrameMaster™
Features & Benefits• Fast – 10 shot strip feed with automatic advance• Optimum fixing – positive power adjustment ensures
consistent performance• Power – adjustable for use with steel or concrete
• Minimal maintenance – easy to dismantle & clean to reduce downtime
• Long Life – long life piston & buffer
DescriptionThe Ramset™ FrameMaster™ TS750P is the timber framing expert. A power adjustable tool designed for fixing timber framing to concrete and general repetitive work.
Item Code Impact Energy Pin Capacity Weight Power Load
TS750P 300J Up to 85mm 2.5kg .27 Strip
FrameBoss™DescriptionThe Ramset™ FrameBossTM is a fully automatic powder actuated tool, which is capable of fixing 10 pins without the need to reload or cycle the tool. The automatic piston return system and 10 pin magazine allow for faster fixing rates with less effort. The magazine can be adjusted to lock into a number of positions to allow the tool to be used in confined spaces. The FrameBossTM tool is also supplied with a single shot fastener guide to allow the tool to be used with longer fasteners and assembles such as brackets and clips. With a huge 380 Joules of impact energy coupled with power adjustment, the tool can be used in a wide variety of applications e.g. Timber framing, formwork and the fixing of steel track. FrameBossTM is designed to save you time and money.
Features & Benefits• Automatic piston return • No manual cycling required• Easy to maintain on site• 10 Pin magazine and single shot fastener guide• 100mm single shot capacity, • 75mm magazine capacity
• 380J maximum impact energy• Power adjustment• Trigger lock• Hand guard• Cushioned rubber grip
Item Code Impact Energy Pin Capacity Weight Power Load
FRAMEBOSS75 380J Up to 100mm
75mm with mag.
4.0kg .27 Strip
12 product guide | commercial construction
NOTES:
TyMaster™DescriptionThe Ramset™ TyMaster™ is an effortless, overhead fixing, fully automatic tool with extension pole for efficient, remote, overhead fixing of suspended ceilings and services installations.
Features & Benefits• Fast 10 shot strip feed with automatic advance• Lightweight – reduced fatigue in overhead operation• Fully automatic – high install rate
• Safe – patented “Breech lockout” prevents the tool from firing while directed horizontally or while directed below the horizontal
• Minimal maintenance
Item Code Impact Energy Pin Capacity Weight Power Load
TYMASTER 320J Up to 32mm 2.3kg .27 Strip
FormMaster™DescriptionThe Ramset™ FormMaster™ is the professional’s choice for long pin fixing. A high powered fastening system with the power and comfort to meet the demands of the timber and steel formwork industry and heavier repetitive fixing jobs.
Features & Benefits• Fast – 10 shot strip feed with automatic advance• Optimum fixing – positive power adjustment ensures
consistent performance• Power – adjustable for use with steel or concrete• Front barrel safety grip & hand
guard – all day use comfort
• Minimal maintenance – easy to dismantle & clean to reduce downtime
• Long Life – long life piston & buffer
Item Code Impact Energy Pin Capacity Weight Power Load
FORMMASTER 400J Up to 100mm 3.0kg .27 Strip
DIRECT FIXING TOOLS AND ACCESSORIES
POWDER ACTUATED FIXING TOOLS
NOTES:
product guide | commercial construction 13
Item Code Description Pack Qty
FrameMaster™ (TS750P) PA27833 Piston Kit Standard - FrameMaster (TS750P) 1 PA27831 Fastener Guide Assembly - FrameMaster (TS750P) 1 PA27580 Spall Shield - FrameMaster (TS750P) 1
TyMaster™
653116 Piston Kit Standard - TyMaster 1 PAT1085 Piston Kit High Power - TyMaster 1 653021 Buffer (x3) - TyMaster 1 653106 Fastener Guide Assembly - TyMaster 1 PA655901 Extension Pole - TyMaster 1 PA655902 Pole Connector - TyMaster 1
FormMaster™ PA28811 Piston Kit - FormMaster 1 PA312860 Buffer (x5) - FormMaster 1 PA28816 Fastener Guide Assembly - FormMaster 1 PA310000 Spall Shield - FormMaster 1
FrameBoss™
PA37037 Piston 1 011483 Piston Return Spring (x1) 1 010983 Piston Insulation Ring (x2) 1 PA37040 Fastener Guide Assembly 1 PA37038 Magazine Assembly 1 PA37023 Spall Guard 1
FrameBoss™ 75
PA37041 Piston 1 011483 Piston Return Spring (x1) 1 010983 Piston Insulation Ring (x2) 1 PA37063 Fastener Guide Assembly 1 PA37049 Magazine Assembly 1 PA37023 Spall Guard 1
Accessories
PA9333 Tool Maintenance Kit 1 PA9316 Lubricating & Releasing Oil 1
DIRECT FIXING TOOLS AND ACCESSORIES
14 product guide | commercial construction
POWDER ACTUATED TOOL ACCESSORIES
* While stocks last
NOTES:
DIRECT FIXING TOOLS AND ACCESSORIES
product guide | commercial construction 15
DRIVE PINS AND POWER LOADS
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
LDU25 25 8 100
LDU32 32 8 100
LDU50 50 8 100
LDU57 57 8 100
LDU65 65 8 100
LDU75 75 8 100
LDU90 90 8 100
LDU99 100 8 100
COLLATED DRIVE PINS FOR USE WITH FrameBoss™
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
C925C 25 9 500
C930C 30 9 500
C940C 40 9 300
C950C 50 9 300
C960C 60 9 300
C975C* 75 9 300
* For use with FRAMEBOSS75 only
TIMBER FORMWORK PINS FOR USE WITH FormMaster™ & FrameMaster™
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
LDU99F 99 5 200
SPECIALIST PINS FOR FIXING TO STRUCTURAL STEEL
Item Code Description Pack Qty
SC950 Pin for fixing 35mm timber to steel 100
SC960 Pin for fixing 45mm timber to steel 100
DRIVE PINS AND POWER LOADS FOR USE WITH FrameBoss™, FrameMaster™, FormMaster™ & JobMaster™
NOTES:
DIRECT FIXING TOOLS AND ACCESSORIES
16 product guide | commercial construction
SPECIALIST COLLATED PINS FOR FIXING TO STRUCTURAL STEEL & HARD CONCRETE FOR USE WITH FrameBossTM
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
SC940C 40 9 300
SC950C 50 9 300
SC960C 60 9 300
SACRIFICIAL FORMWORK PINS FOR USE WITH FrameBossTM, FormMasterTM & JobMasterTM
Item Code Description Pack Qty
SBR9 20mm Pin for Steel with 14mm Washer 100
WASHERED PIN ASSEMBLIES
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
LWU25 25 22 100
LWU32 32 22 100
LWU25K 25 Knurled 16 100
LWU75 75 16 100
ANGLE CLIP (CATINERY BRACKET) PIN ASSEMBLIES
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
LAU25 25 8 100
LAU30H 30 8 100
DRIVE PINS AND POWER LOADS
NOTES:
Item Code Shank Length (mm) Head Diameter (mm) Pack Qty
HDB75 75 6 100
DIRECT FIXING TOOLS AND ACCESSORIES
product guide | commercial construction 17
POWDER ACTUATED ACCESSORIES - CLIPS
Item Code Description Pack Qty
RCA25F Angle (Ramclip) 100
FASTENERS & ASSEMBLIES FOR PREVIOUS RAMSET TOOLS DRIVE PINS FOR J20, J10 & J20S
Item Code Strength Colour Pack Qty
PLSGR22 Weak Green 100
PLSYW22 Medium Yellow 100
PLSRD22 Strong Red 100
STRIP POWERLOADS .27 calibre
Item Code Strength Colour Pack Qty
PLCYW22S Medium Yellow 100
PLCRD22S Strong Red 100
SHORT SERIES POWERLOADS .22 calibre
DRIVE PINS AND POWER LOADS
FOR USE WITH FrameBoss™, FrameMaster™, FormMaster™, TyMaster, Rocket, Striker, S75A, & TS750. (TS60P)
FOR USE WITH JobMaster™
Item Code Strength Colour Pack Qty
PLCYW22S Medium Yellow 100
PLCRD22S Strong Red 100
PLCPU22S Very Strong Purple 100
POWERLOADS .22 calibreFOR USE WITH J20S & J20
NOTES:
Ramset™ Power Tools have been used by construction trades for over 40 years in Australia and New Zealand. We understand the need for Power, Toughness and Reliability in heavy construction and provide premium tools with the latest vibration technology. Our high performance range includes:
• DynaDrill™ Rotary Hammers
• Cordless Tools
• Carbide Tipped Drill Bits
• Diamond Drilling & Cutting
power tools and accessories
18 product guide | commercial construction
POWER TOOLS AND ACCESSORIES
DynaDrill™ ROTARY & DEMOLITION HAMMERS
DynaDrill™ 2kg Combi Hammer
Features & Benefits• 790W Motor with 2.7 Joules of impact energy • Block construction. Reliable and durable housing• Forward and reverse rotation & chisel function
• Rotating brush plate for equal power in forward and reverse mode
DescriptionThe Ramset DynaDrill™ 522 Combi Hammer is the ideal tool choice for all those common drilling applications whether into concrete, timber or steel.
Item Code Power Impact Force Max Drill Dia Vibration Carbide
DD522 790W 2.7J 24mm 13 m/s2 R3 Plus U3 Plus
DynaDrill™ 2kg Combi Hammer
Features & Benefits• Powerful 850W Motor with
3.2Joules of impact energy • Class leading drilling rates and
chisel performance
• Substantially improved vibration reduction• Rotating brush plate for same power
in forward or reverse mode• Quick change chuck system
DescriptionThe Ramset DynaDrill™ 529 Combi Hammer is truly the class leasing 2kg tool on the market. The tool of choice with its powerful motor, enhanced anti vibration and the versatility of the quick change chuck system.
Item Code Power Impact Force Max Drill Dia Vibration Carbide
DD529 850W 3.2J 28mm 11 m/s2 R3 Plus U3 Plus
DynaDrill™ 3kg Combi Hammer
Features & Benefits• Powerful 800W Motor• Class leading drilling and chiseling performance• Low vibration due to the Ramset vibration
control system
• Balanced weight distribution as a result of the L shaped design
• Quick change chuck system
DescriptionThe Ramset DynaDrill™ 533 sets new standards for a 3kg combi hammer. Its ergonomic drop motor design gives the tool a more balanced feel and delivers the additional performance when stepping up from a 2kg tool.
Item Code Power Impact Force Max Drill Dia Vibration Carbide
DD533 800W 3.5J 28mm 12 m/s2 R3 Plus U3 Plus
product guide | commercial construction 19
POWER TOOLS AND ACCESSORIES
DynaDrill™ ROTARY & DEMOLITION HAMMERS
DynaDrill™ 4kg Combi Hammer
Features & Benefits• Vibration damping mechanism for
super smooth operation• In-built safety clutch providing operator
protection should a drill bit jam.• Soft grip, back and side handle for
safe and fatigue free operations
• Finger tip control for point start accuracy with variable speed adjustment
• Sealed lubrication system for extended service intervals
• Quick change chuck system• Reverse switch
DescriptionThe Ramset™ DynaDrill™ 544 is a class leading 4kg combi hammer drill in terms of performance and vibration reduction mechanisms. A robust and ergonomic design makes it the ideal tool for volume drilling in concrete, light picking and chiselling.
Item Code Power Impact Force Max Drill Dia Vibration Carbide
DD544 900W 4.2J 32mm 10 m/s2 R3 Plus U3 Plus
DynaDrill™ 6kg Combi Hammer
Features & Benefits• Powerful and robust 1,100W Combi Hammer
provides extended tool lifetime under the toughest working conditions.
• Vibration damping systems built into the tool holder, rear and auxiliary handles deliver exceptionally low vibration values for a tool in this class.
• New Rotation Control system stops the tool immediately upon the drill bit jamming providing the highest level of safety for the operator.
• Horizontal and vertical drilling level gauge for accurate drilling.
• Power LED indicator and service LED indicator• One hand chuck system
DescriptionThe Ramset™ DynaDrill™ 566 is a powerful and versatile Combi-Hammer designed to get through the toughest jobs with ease. The DD566 incorporates many new and innovative technologies such as vibration and rotation control which make the tool more comfortable and safer for the operator. This is the ideal tool for those that require high productivity and lifetime from a large Combi-Hammer.
Item Code Power Impact Force Max Drill Dia Vibration Carbide
DD566 1100W 6.5J 45mm 8.2 m/s2 U3 & R3 Max
RRCRAMSETROTATIONCONTROL
R
RRCRAMSETROTATIONCONTROL
R
NOTES:
RRCRAMSETROTATIONCONTROL
R
20 product guide | commercial construction
POWER TOOLS AND ACCESSORIES
DynaDrill™ ROTARY & DEMOLITION HAMMERS
DynaDrill™ 8kg Combi Hammer
Features & Benefits• 1500W Motor with 12.5J of Impact Energy
delivers the best possible drilling and chiselling performance
• Turbo Function utilises the power which is normally used in drilling mode for chiselling
• RVC Anti-Vibration Systems include a de-
coupled main handle, a mass damper and anti-vibration impact mechanism
• Auto Lock-On function increases operator comfort while chiselling
• Six position speed dial for adjusting impact force to base material
DescriptionThe Ramset™ DynaDrill™ 585 is our largest Combi-Hammer at 8kg. Robustly designed for large diameter drilling and chiselling in concrete. It’s high performance rate and three way anti-vibration systems ensure it is one of the most productive and safest tools on the worksite.
Item Code Power Impact Force Max Drill Dia Vibration Carbide
DD585 1500W 12.5J 45mm 8.0 m/s2 U3 & R3 Max
RRCRAMSETROTATIONCONTROL
R
DynaDrill™ 11kg Demolition Hammer
Features & Benefits• High performance to weight ratio with 1700W
motor and 23J of impact energy.• In-line design optimizes the tools centre of
gravity making it ideal for downward demolition applications.
• Ramset Vibration Control (RVC) controls vibration levels to only 8m/s²
• Adjustable impact force to match base material.• Vario-Lock mechanism for adjusting the chisel
angle into one of 12 different positions• Lock-on power switch which can be operated
without removing your hands from the handle.
DescriptionThe Ramset DynaDrill 611 is an in-line Demolition Hammer. With a powerful motor and high impact energy it has one of the best performance to weight ratios in the demolition tool market.
Item Code Power Impact Force Max Drill Dia Vibration Carbide
DD611 1700W 23J 12 8.0 m/s2 R3 Max
RRCRAMSETROTATIONCONTROL
R
NOTES:
product guide | commercial construction 21
POWER TOOLS AND ACCESSORIES
U3TM PLUS TRI-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty
DDU305050 5 50 x 110 1 DDU305100 5 100 x 160 1 DDU306050 6 50 x 110 1 DDU306100 6 100 x 160 1 DDU306150 6 150 x 210 1 DDU306100X3 1/4” 100 x 160 1 DDU308100 8 100 x 160 1 DDU308150 8 150 x 210 1 DDU310100 10 100 x 160 1 DDU310200 10 200 x 260 1 DDU312150 12 150 x 210 1 DDU312250 12 250 x 310 1 DDU313200 13 200 x 250 1 DDU314200 14 200 x 250 1 DDU316200 16 200 x 250 1 DDU316400 16 400 x 450 1
R3TM PLUS CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty
DDR305050 5 50 x 110 1 DDR305100 5 100 x 160 1 DDR305125X5 5.5 150 x 210 1 DDR306050 6 50 x 110 1 DDR306100 6 100 x 160 1 DDR306150 6 150 x 210 1 DDR306050X3 1/4” 50 x 110 1 DDR306100X3 1/4” 100 x 160 1 DDR306150X3 1/4” 150 x 210 1 DDR308065 8 100 x 160 1 DDR308150 8 150 x 210 1 DDR310100 10 100 x 160 1 DDR310180 10 200 x 260 1 DDR310400 10 400 x 460 1 DDR312125 12 150 x 210 1 DDR312250 12 250 x 310 1 DDR312400 12 400 x 460 1 DDR312125X7 1/2” 150 x 210 1 DDR314200 14 200 x 250 1 DDR315150 15 150 x 200 1 DDR316125 16 150 x 200 1 DDR316200 16 200 x 250 1 DDR316400 16 400 x 450 1
R3TM PLUS Y-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty
DQR318200 18 200 x 250 1 DQR318400 18 400 x 460 1 DQR319250 19 250 x 310 1 DQR320200 20 200 x 250 1 DQR320400 20 400 x 450 1 DQR322200 22 200 x 250 1 DQR322400 22 400 x 450 1 DQR324200 24 200 x 250 1 DQR324400 24 400 x 450 1 DQR325400 25 400 x 450 1 DQR326200 26 250 x 300 1 DQR326400 26 400 x 450 1
CARBIDE DRILL BITS AND CHISELS
22 product guide | commercial construction
POWER TOOLS AND ACCESSORIES
D3™ PLUS DUST-EXTRACTING CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total Length (mm) Pack Qty
DDER12200 12 200 x 320 1 DDER14250 14 250 x 370 1 DDER16250 16 250 x 370 1 DDER18250 18 250 x 370 1 DDER20250 20 250 x 370 1 DDER24250 24 250 x 370 1
For use with AC1630P 32L Wet / Dry Vacuum
CARBIDE DRILL BITS AND CHISELSU3TM MAX TRI-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty
DDUM12200 12 200 x 340 1 DDUM12400 12 400 x 540 1 DDUM14200 14 200 x 340 1 DDUM14400 14 400 x 540 1 DDUM16200 16 200 x 340 1 DDUM16400 16 400 x 540 1
R3TM MAX Y-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty
DDYM18200 18 200 x 340 1 DDYM18400 18 400 x 540 1 DDYM18600 18 600 x 740 1 DDYM20200 20 200 x 320 1 DDYM20400 20 400 x 520 1 DDYM20800 20 800 x 920 1 DDYM22200 22 200 x 320 1 DDYM22400 22 400 x 520 1 DDYM22800 22 800 x 920 1 DDYM24200 24 200 x 320 1 DDYM24400 24 400 x 520 1 DDYM25400 25 400 x 520 1 DDYM25800 25 800 x 920 1 DDYM26400 26 400 x 520 1 DDYM28400 28 400 x 520 1 DDYM28800 28 800 x 920 1 DDYM30400 30 400 x 520 1 DDYM32400 32 400 x 520 1 DDYM32800 32 800 x 920 1 DDYM35400 35 400 x 520 1 DDYM38400 38 400 x 520 1 DDYM40400 40 400 x 520 1
D3™ MAX DUST-EXTRACTING CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total Length (mm) Pack Qty
DDEM14400 14 400 x 600 1 DDEM16400 16 400 x 600 1 DDEM18400 18 400 x 600 1 DDEM20400 20 400 x 600 1 DDEM22400 22 400 x 600 1 DDEM25400 25 400 x 600 1 DDEM28400 28 400 x 600 1 DDEM30400 30 400 x 600 1 DDEM32400 32 400 x 600 1 DDEM35400 35 400 x 600 1
For use with AC1630P 32L Wet / Dry Vacuum
CARBIDE DRILL BITS AND CHISELS
product guide | commercial construction 23
POWER TOOLS AND ACCESSORIES
CARBIDE DRILL BITS AND CHISELS
CHISELS - R3TM PLUS Item Code Total Length (mm) Type Pack Qty
DHR3PCS 250 Point 1 DHR3FCS 250 20 mm Flat 1 DHR3SC040 250 40 mm Spade 1
CHISELS - R3TM MAX Item Code Total Length (mm) Type Pack Qty
DHSMPCM 400 Point 1 DHSMFCM 400 25mm Flat 1 DHSMFCL 600 25mm Flat 1 DHSMSC050 400 50mm Spade 1 DHSMSC080 300 50mm Spade 1 DHSMSC115 300 115mm Spade 1
DYNADRILLTM ACCESSORIES Item Code Description Pack Qty.
054288 Quick Fit Keyless Chuck For DD529, DD533 and DD544 Combi Hammer 1 DAR3DH Chuck Adaptor - R3 Plus 1 DASMR3 Adaptor R3 Max - R3 Plus 1
NOTES:
24 product guide | commercial construction
POWER TOOLS AND ACCESSORIES
DIAMOND DRILLING AND CUTTING RANGEDIAMOND DRILLING MACHINES
Diamond Core Drilling Kit
Features & Benefits• Powerful 2000W motor that can
be hand held or rig mounted• Suitable for ½” BSP & 1 ¼”
UNC Core Bit connections• Robust drilling rig suitable for
drilling up to 200mm diameter
• Sturdy rotomolded plastic and stainless steel tool case
• Solid recessed wheels for ease of transportation to and from the jobsite.
• Integrated transport and carrying handles• Molded lid enables nesting of multiple cases
to prevent sliding during transportation
DescriptionA fully integrated diamond core drilling system supplied complete with a drilling motor, drilling rig and connection accessories. Entire kit is supplied in a robust double walled tool case.
Item Code Description Pack Qty
RM160KIT Diamond Core Drilling Kit 1
RM160 Drilling Motor 2000W (Only) 1
TRIX160 Small Diamond Drilling Rig (Only) 1
Diamond Drilling Motor 2500W
Features & Benefits• Integrated friction clutch for the
highest level of operator safety• Thermal protection to avoid
over heating of the motor
• Double shank means the machine is compatible with ½” and 1 ¼” core drills
• Two speed gear box• Soft start motor.
DescriptionThe RM250 is a high performance drilling machine designed for use in conjunction with a drilling rig. A two speed motor with a maximum drilling diameter of 250mm makes it the ideal machine for a range of core drilling applications on the construction site
Item Code Description Pack Qty
RM250 Drilling Motor 2500W 1
TRIX350 Large Diamond Drilling Rig 1
product guide | commercial construction 25
POWER TOOLS AND ACCESSORIES
DIAMOND DRILLING AND CUTTING RANGE
DIAMOND DRILLING CORE BITS - WET Item Code Length (mm) Diameter (mm) Pack Qty
1/2” BSP Thread DCWS014400 400 14 1 DCWS016400 400 16 1 DCWS018400 400 18 1 DCWS020400 400 20 1 DCWS024400 400 24 1 DCWS026400 400 26 1 DCWS032400 400 32 1 DCWS035400 400 35 1 DCWS040400 400 40 1 1 1/4” UNC DCWL052450 450 52 1 DCWL067450 450 67 1 DCWL077450 450 77 1 DCWL082450 450 82 1 DCWL092450 450 92 1 DCWL102450 450 102 1 DCWL117450 450 117 1 DCWL122450 450 122 1 DCWL125450 450 125 1 DCWL132450 450 132 1 DCWL142450 450 142 1 DCWL152450 450 152 1Other core sizes (150 - 350) are available on request. please consult your Ramset™ representative for advice.
DIAMOND DRY CUTTING MACHINE Item Code Description Pack Qty
RW150ES Concrete Chaser 2500W 1
DIAMOND DRILLING ACCESSORIES Item Code Description Pack Qty
SDP1 Vacuum Pump 200W 1 623030 Vacuum Tank 5L 1 623430 Connection Plate (RM250) 1 624753 Dovetail Adaptor (TRIX160) 1 624755 Adaptor Set Kit 32 (TRIX160) 1 624025 Vacuum Set for TRIX160 Rig 1 622220 Quick Release Connector Bolts 1 172710 Portable Water Supply Unit 1 624019 Water Collector for TRIX160 Rig 1 624020 Membranes to suit TRIX160 Water Collector 5 622020 Extension Rod 1/2” x 300mm 1 622070 Extension Rod 1 1/4” x 400mm 1 172770 Kit with 5 Copper Rings 1
26 product guide | commercial construction
POWER TOOLS AND ACCESSORIES
DIAMOND DRILLING AND CUTTING RANGE
INDUSTRIAL ANGLE GRINDERS* Item Code Description Pack Qty
RGP125AV Angle Grinder (1400W) 125 mm 1 RGP230AV Angle Grinder (2400W) 230 mm 1 SG125E Concrete Grinder 125mm 1 DHG125 Dust Hood Grinding (RGP125AV) 1 610980 Dust Hood Grinding (RGP230AV) 1 610999 Dust Hood Cutting (RGP230AV) 1
WET AND DRY VACUUM
Accessories 644004 5m antistatic hose 1 644006 2 sets polyester filters 1 644030 Acessory Kit 1 620922 Dust Bags (Pack of 3) 1
DIAMOND CUTTING BLADES Item Code Diameter (mm) Description Pack Qty
GC127LS 125 Diamond Blade 125mm Segmented 1 GC152TS 150 Diamond Blade 150mm Turbo 2 GC230LS 230 Diamond Blade 230mm Segmented 1 GC127TS 125 Diamond Blade 125mm Turbo 1 GC230TS 230 Diamond Blade 230mm Turbo 1
DIAMOND CUP WHEELS Item Code Diameter (mm) Description Pack Qty
DGCW125DRC 125 Turbo Hard 1 DGCW125SFC 125 Super Turbo 1 DGCW125STC 125 Spiral Turbo 1
CUT OFF WHEELS Item Code Diameter (mm) x Bore (mm) Description Pack Qty
CW115SU 115 x 1.0 Cutoff Wheel-Steel INOX 25 CW125SU 125 x 1.0 Cutoff Wheel-Steel INOX 25 CW230S 230 x 2.2 Cutoff Wheel-Steel 25
* While stocks last
NOTES:
Item Code Description Power Max. Airflow Max. Water Column Depression Pack Qty
AC1630P 32L vacuum wet & dry 1600W 64 L/S 260 mbar 1
for use with D3 Dust Extracting Carbide Drills & Diamond Cutting Equipment
* While stocks last
product guide | commercial construction 27
POWER TOOLS AND ACCESSORIES
POWER TOOLS AND ACCESSORIESLITHIUM-ION CORDLESS RANGE
18V Cordless Rotary Hammer
Features & Benefits• High quality, 18V battery pack for superior
performance and run time• Powerful hammer mechanism delivers 2.7J of
impact energy
• Enhanced anti-vibration system provides maximum operator comfort
• This versatile tool provides rotary hammer, hammer only and rotation only functions
• Variable position chisel stop• All metal gearbox for durability
DescriptionThe powerful Ramset™ R18 Lithium Ion cordless rotary hammer delivers extremely high performance from a robust 18V tool. Corded tool performance for a variety of concrete drilling applications.
Item Code Impact Force Max Drill Dia Vibration Carbide Pack Qty
CRHR18 2.7J 20mm 12.2 m/s2 R3 Plus & U3 Plus 1
18V Cordless Hammer Drill / Driver
Features & Benefits• 4 pole frameless motor generating
a impressive 75Nm of torque• Variable speed trigger for enhanced control• 24 stage torque adjustment
• Spindle lock plus keyless chuck - convenient bit change with one hand
• Large ergonomic soft grip design for comfortable use
DescriptionA powerful combination tool for high torque drilling, screwdriving and percussion drilling.
Item Code Max. Torque Max Drill Dia (Steel) Torque Settings Vibration Pack Qty
CHDDR18 75Nm 13 24 11.6 m/s2 1
18V Cordless Angle Grinder
Features & Benefits• 4 pole frameless motor delivers 9000 rpm• Paddle switch design mechanism increases
control and comfort
• Dead man switch increases safety• The large spindle lock provides fast and efficient
wheel replacement• Quick, tool free guard adjustment
DescriptionThe Ramset R18 Lithium Ion cordless angle grinder is ideal for a variety of finishing jobs on the building site.
Item Code Max Speed Max Disc Dia Vibration Pack Qty
CAGR18 9000rpm 115mm 6.1 m/s2 1
28 product guide | commercial construction
POWER TOOLS AND ACCESSORIES
LITHIUM-ION CORDLESS RANGE
18V Cordless Impact Wrench
Features & Benefits• Massive 610 Nm of torque• Variable speed trigger for enhanced control
• Dynamic brake stops unit immediately after the switch is released for faster socket changes
• Magnesium gear case for added durability and lighter weight
DescriptionA powerful 18V impact wrench for fast and easy fastening of large construction anchors.
Item Code Drive Shank Max. Torque Vibration Pack Qty
CIWR18 “1/2”” Sq.” 610Nm 11.3 m/s2 1
18V Compact Cordless Impact Driver
Features & Benefits• 4 pole frameless motor delivers
170Nm of torque• 2-speed control allows for speed &
power adjustment while working with different materials and fasteners
• ¼” Hex bit holder• Variable speed trigger for enhanced control• LED lighting for working in dark spaces• Lightweight compact design with Belt Hook
DescriptionThe Ramset R18 Lithium Ion cordless impact driver is a high speed and high torque tool for fixing and fastening applications.
Item Code Drive Shank Max. Torque Vibration Pack Qty
CIDR18C “1/4”” Hex” 170Nm 2.8 m/s2 1
18V Cordless ChemSet™ Applicator
Features & Benefits• Variable speed trigger for enhanced control• Anti-Drip mechanism instantly stops material
dripping upon trigger release
• Six position adjustable speed control• Robust, all metal gear system• Class leading dispensing performance
DescriptionThe powerful Ramset R18 Lithium Ion applicator is ideal for effortless dispensing of all Ramset Chemical injection products.
Item Code Max Disp Rate Max Disp Force Pack Qty
CUAR18 533ml / min 430kg 1
product guide | commercial construction 29
POWER TOOLS AND ACCESSORIES
product guide | commercial construction 30
LITHIUM-ION CORDLESS RANGE
* While stocks last
NOTES:
18V Batteries & ChargersItem Code Description Pack Qty
CBATR18HD5 18V Battery 5.0Ah 1
CCR18 18V Battery Charger 1
CKITBAG Cordless Tool Bag 1
CBASEKITR18 “18V Base Kit (2 x CBATR18HD5, 1 x CCR18, 1 x CKITBAG)” 1
Impact SocketsItem Code Driver Type Pack Qty
ISD12010 10mm Long Impact Socket 1
ISD12013 13mm Long Impact Socket 1
ISD12015 15mm Long Impact Socket 1
ISD12016 16mm Long Impact Socket 1
ISD12017 17mm Long Impact Socket 1
ISD12018 18mm Long Impact Socket 1
ISD12019 19mm Long Impact Socket 1
ramsetreid Mechanical Anchors are manufactured to our high quality standards to ensure maximum confidence the product is fit for purpose and will meet the designers load requirements.
The ramsetreid Mechanical Anchoring range consists of:
• Extreme Seismic Anchors
• Boa™ Coil Expansion Anchor
• TruBolt™ Stud Anchors
• AnkaScrew™ Screw In Anchors
• DynaBolt™ Sleeve Anchors
• TruFast™ Push Pull Suspension Anchor
• DynaSet™ Drop-In Anchor
• Electrical and Plumbing Fixture Suspension Anchors
mechanical anchoring
product guide | commercial construction 31
MECHANICAL ANCHORING
l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised * While stocks last
32 product guide | commercial construction
EXTREME ANCHORING FOR DESIGN SPECIFICATIONSpaTecTM Plus SAFETY ANCHORS Item Code Drilled Hole Dia ø (mm) Anchor Length (mm) x Thread Size (mm) Pack Qty
l SP10105 15 105 x M10 25l SP10105F* 15 105 x M10 25u SP10110SS** 15 110 x M10 25l SP12105 18 105 x M12 25l SP12120 18 120 x M12 25u SP12120SS** 18 120 x M12 25l SP16145 24 145 x M16 10l SP20170 28 170 x M20 5** Available to order. Lead times apply. * While stocks last
TruBoltTM XtremTM Stud Anchors - Hex Nut - Zinc Plated
Part No.Thread
Size
Anchor Length (mm)
Max Fixture
Thickness (mm)
Drilled Hole Ø (mm)
Min Hole Depth (mm)
Max Torque (Nm)
Fixture Hole Ø (mm)
Pack Qty
T10085X M10 85 5 10 80 45 12 50
T12105X M12 105 10 12 95 60 14 25
SammyTM Seismic Approved Suspension Anchor
Item Code Thread Size Drilled Hole Dia ø (mm) Hole Depth
8173957 M10 6.5mm 37mm
Socket to suit M10 Sammys. CODE: 8113190
TapconTM Seismic Anchor Item Code Anchor Size Drilled Hole Dia ø (mm) Fixture Hole Ø
3511407 8mm 6.5mm 10mm
product guide | commercial construction 33
MECHANICAL ANCHORING
TruBoltTM STUD ANCHORS Part No. Thread Size Anchor Drilled Hole Ø Max Fixture Fixture Min Hole Effective Pack Qty Length (mm) (mm) Thickness (mm) Hole Ø (mm) Depth (mm) Length (mm)
l T12080 M12 80 12 6 15 90 58 20n T12080GH M12 80 12 6 15 90 58 20l T12100 M12 100 12 25 15 105 71 20n T12100GH M12 100 12 25 15 105 71 20l T12120 M12 120 12 45 15 105 93 20l T12140 M12 140 12 65 15 105 111 20n T12140GH M12 140 12 65 15 105 111 20n T12180GH M12 180 12 100 15 125 151 20l T16110 M16 110 16 8 19 125 67 20n T16110GH M16 110 16 8 19 125 67 20l T16125 M16 125 16 20 19 135 85 20n T16125GH M16 125 16 20 19 135 85 20l T16150 M16 150 16 45 19 145 110 20n T16150GH M16 150 16 45 19 145 110 20l T16175 M16 175 16 70 19 145 135 20n T16175GH M16 175 16 70 19 145 135 20l T20140 M20 140 20 10 24 160 85 10n T20140GH M20 140 20 10 24 160 85 10l T20160 M20 160 20 35 24 170 115 10n T20160GH M20 160 20 35 24 170 115 10n T20215GH M20 215 20 90 24 200 170 10
l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised * While stocks last
TruBoltTM Stud Anchors - Hex Nut - Stainless Steel
RamsetPart No
Thread Diameter
DrillDiameter
Totalanchorlength
Hole depth minus fixture
thickness
Minimum Drilling depth
Maximum fixture
thickness
Maximum tightening
Torque
Fixture clearance
hole diameter
T08055SSA ø8 ø8 55mm 70mm 65mm 5mm 20Nm ø9
T08070SSA ø8 ø8 70mm 85mm 65mm 20mm 20Nm ø9
T08090SSA ø8 ø8 90mm 105mm 65mm 40mm 20Nm ø9
T08130SSA ø8 ø8 130mm 145mm 65mm 80mm 20Nm ø9
T10065SSA ø10 ø10 65mm 83mm 78mm 5mm 35Nm ø12
T10075SSA ø10 ø10 75mm 93mm 78mm 15mm 35Nm ø12
T10095SSA ø10 ø10 95mm 113mm 78mm 35mm 35Nm ø12
T10120SSA ø10 ø10 120mm 138mm 78mm 60mm 35Nm ø12
T12080SSA ø12 ø12 80mm 100mm 95mm 5mm 50Nm ø14
T12100SSA ø12 ø12 100mm 120mm 95mm 25mm 50Nm ø14
T12115SSA ø12 ø12 115mm 135mm 95mm 40mm 50Nm ø14
T12140SSA ø12 ø12 140mm 160mm 95mm 65mm 50Nm ø14
T16125SSA ø16 ø16 125mm 147mm 117mm 30mm 100Nm ø18
T16150SSA ø16 ø16 150mm 172mm 117mm 55mm 100Nm ø18
T16170SSA ø16 ø16 170mm 192mm 117mm 75mm 100Nm ø18
HEAVY DUTY ANCHORING
NOTES:
MECHANICAL ANCHORING
l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised * While stocks last
Boa™ Coil ANCHORS - COMPLETE Item Code Anchor Size Anchor Length (mm) Pack Qty
l BAC08075 1/2”/13 mm 75 50l BAC08100 1/2”/13 mm 100 25l BAC10090 5/8”/16 mm 90 25l BAC10125 5/8”/16 mm 125 25l BAC12115 3/4”/19 mm 115 20
BoaTM Coil ANCHORS - COIL ONLY Item Code Anchor Size Pack Qty
l BAC08 1/2”/13 mm 100l BAC10 5/8”/16 mm 50l BAC12 3/4”/19 mm 50
HEAVY DUTY ANCHORING
NOTES:
34 product guide | commercial construction
MECHANICAL ANCHORING
MEDIUM DUTY ANCHORING
WERCS™ AnkaScrew™ ANCHORS Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Socket Pack Qty Size Length(mm) (mm) Thickness (mm) (mm) Size (mm)
l AS06050W 6 50 6 20 8 10 100t AS06050WGM 6 50 6 20 8 10 100l AS06075W 6 75 6 45 8 10 100t AS06075WGM 6 75 6 45 8 10 100l AS06100W 6 100 6 70 8 10 100t AS06100WGM 6 100 6 70 8 10 100l AS08060W 8 60 8 20 10 13 100t AS08060WGM 8 60 8 20 10 13 100l AS08075W 8 75 8 35 10 13 100t AS08075WGM 8 75 8 35 10 13 100l AS08100W 8 100 8 60 10 13 100t AS08100WGM 8 100 8 60 10 13 100l AS10060W 10 60 10 10 13 15 50t AS10060WGM 10 60 10 10 13 15 50l AS10075W 10 75 10 25 13 15 50t AS10075WGM 10 75 10 25 13 15 50l AS10100W 10 100 10 50 13 15 50t AS10100WGM 10 100 10 50 13 15 50l AS12075W 12 75 12 15 15 16 50t AS12075WGM 12 75 12 15 15 16 50l AS12100W 12 100 12 40 15 16 50t AS12100WGM 12 100 12 40 15 16 50l AS12150W 12 150 12 90 15 16 20t AS12150WGM 12 150 12 90 15 16 20
l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised
AnkaScrewTM Large Diameter ANCHORS Item Code Anchor Size (mm) x Head Type Pack Qty Anchor Length (mm)
l AS16115 16 x 115 Flanged Hex Head (Zinc plate) 10l AS16160 16 x 160 Flanged Hex Head (Zinc plate) 10
DynaBoltTM ANCHORS HEX BOLT Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)
l DP08045H M6 45 8 15 10 100u DP08045HSS M6 45 8 15 10 100l DP10045H M8 45 10 8 12 50u DP10045HSS M8 45 10 8 12 50l DP10055H M8 55 10 20 12 50u DP10060HSS M8 60 10 20 12 50l DP10080H M8 80 10 30 12 50u DP10080HSS M8 80 10 30 12 50u DP10105HSS M8 105 10 60 12 25l DP12065H M10 65 12 15 15 25l DP12075H M10 75 12 20 15 25u DP12075HSS M10 75 12 20 15 25
product guide | commercial construction 35
MECHANICAL ANCHORING
l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised * While stocks last
DynaBoltTM ANCHORS - Hex Nut Zinc Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)
l D6026 M4.5 26 6 3 8 100l DP06040 M4.5 38 6 12 8 100u DP06040SS M4.5 38 6 12 8 100l DP06060 M4.5 57 6 30 8 100u DP06060SS M4.5 57 6 30 8 100l DP08040 M6 40 8 6 10 100u DP08040SS M6 40 8 6 10 100l DP08065 M6 66 8 25 10 50u DP08065SS M6 66 8 25 10 50l DP08090 M6 92 8 50 10 50l DP10040 M8 41 10 3 12 50n DP10040GH M8 41 10 3 12 50l DP10050 M8 49 10 20 12 50n DP10050GH M8 49 10 20 12 50u DP10050SS M8 49 10 20 12 50l DP10075 M8 76 10 30 12 50n DP10075GH M8 76 10 30 12 50u DP10075SS M8 76 10 30 12 50l DP10100 M8 103 10 50 12 25n DP10100GH M8 103 10 50 12 25u DP10100SS M8 103 10 50 12 25l DP10125 M8 124 10 80 12 25l DP12060 M10 55 12 10 15 25n DP12060GH M10 55 12 10 15 25u DP12060SS M10 55 12 10 15 25l DP12070 M10 70 12 15 15 25n DP12070GH M10 70 12 15 15 25u DP12070SS M10 70 12 15 15 25l DP12100 M10 98 12 45 15 20n DP12100GH M10 98 12 45 15 20u DP12100SS M10 98 12 45 15 20l DP12125 M10 126 12 70 15 20n DP12125GH M10 126 12 70 15 20l DP16065 M12 62 16 6 19 20n DP16065GH M12 62 16 6 19 20l DP16110 M12 106 16 35 19 10n DP16110GH M12 106 16 35 19 10l DP16140 M12 140 16 65 19 10n DP16140GH M12 140 16 65 19 10l DP20080 M16 81 20 8 24 10l DP20115 M16 113 20 25 24 5l DP20160 M16 157 20 70 24 5
DynaBoltTM ANCHORS - Round Head Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)
l DP06055R M4.5 55 6 25 8 100
DynaBoltTM ANCHORS - Flat Head Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)
l D6034F M4.5 34 6 10 8 100l DP06060F M4.5 60 6 30 8 100u DP06060FSS M4.5 60 6 30 8 100l DP06075F M4.5 75 6 45 8 100l DP06100F M4.5 100 6 70 8 100l DP08060F M6 60 8 20 10 100l DP08085F M6 85 8 45 10 50l DP10075F M8 75 10 30 12 50l DP10100F M8 100 10 55 12 50l DP10125F M8 125 10 80 12 25
Flat Head Round Head
MEDIUM DUTY ANCHORING
36 product guide | commercial construction
MECHANICAL ANCHORING
l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised * While stocks last
DynaBolt™ Special Part No. Bolt Thread Anchor Length Drilled Hole Ø Pack Qty Style Size (mm) (mm)
l D06026S Set Lok M4.5 26 6 500l D08045K Hook Bolt M6 47 8 100l D08045X Eye Bolt M6 47 8 100
Counter Sunk
DynaBolt™ Decorative Post Heads Part No. Head Thread Overall Length Pack Qty Style Size (mm)
u DF045SS Countersunk M4.5 23 100u DF06SS Countersunk M6 23 100u DF08SS Countersunk M8 27 100
Set Lok
HookEye
DynaSetTM Drop-In anchors Item Code Description Pack Qty
RAP01 Elect. Mech. Services Pk(500 x DSF10 + set tool) 500
DynaSet™ Drop-In anchors Part No. Thread Thread Anchor Length Drilled Hole Ø Pack Qty Size Length(mm) (mm) (mm)
l DSM08 M8 13 30 10 100u DSM08SS M8 13 30 10 100l DSF10 M10 14 30 12 100l DSM10 M10 16 40 12 50u DSM10SS M10 16 40 12 50l DSF12 M12 21 50 16 50l DSM12 M12 21 50 16 50u DSM12SS M12 21 50 15 50l DSM16 M16 28 65 20 25u DSM16SS M16 28 60 20 25l DSM20 M20 35 80 25 25
MEDIUM DUTY ANCHORING
DynaSetTM SETTING TOOLS Item Code To Suit Dynaset Pack Qty
SETDS2 DSM08/DSM08SS 1 SETDF3 DSF10 1 SETDS3 DSM10/DSM10SS 1 SETDS4 DSM12/DSF12/DSM12SS 1 SETDS5 DSM16/DSM16SS 1 SETDS6 DSM20 1
product guide | commercial construction 37
MECHANICAL ANCHORING
ShureDriveTM ANCHORS Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty
l SDM05022 5 22 100l SDM06030 6 30 100u SDM06030SS 6 30 100l SDM06050 6 50 100
ELECTRICAL SUPPORT FIXINGS Item Code Capacity (mm) Type Pack Qty
CHLD Cable bundles Cable Holder + Anchor 50 DK20 16 - 20 Dynaclip 100 DK32 25 - 32 Dynaclip 100 VF1 1.6 - 2.5 Vertical Flange Clip 100
RamPlugsTM - STANDARD Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty
DNP05 5 25 100 DNP06 6 30 100 DNP08 8 40 100 DNP10 10 50 50
RamPlugsTM - LONG Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty
DLP08 8 80 100 DLP10 10 80 50
RamPlugsTM - ULTRA LONG Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty
l DUP10080H 10 80 25l DUP10100H 10 100 25l DUP10135H 10 135 25
LIGHT DUTY ANCHORINGTRUFAST™ PUSH-PULL ANCHORSItem Code Anchor Size (mm) Anchor Length (mm) Pack Qty
l TFE06 6 55 100l TFE06120 6 120 100
l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised * While stocks last
38 product guide | commercial construction
MECHANICAL ANCHORING
l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised * While stocks last
NOTES:
NYLON ANCHORS Item Code Anchor Size (mm) x Head Type Pack Qty Anchor Length (mm)
l TNM325 5 x 25 Mushroom 100l TNR325 5 x 25 Round 100l TNR338 5 x 38 Round 100l TNM425 6.5 x 25 Mushroom 100l TNR425 6.5 x 25 Round 100l TNM438 6.5 x 38 Mushroom 100l TNM450 6.5 x 50 Mushroom 100l TNM475 6.5 x 75 Mushroom 50
EasyDriveTM ANCHORS Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty
l ED05033 5 33 100u ED05033SS 5 33 100l ED05050 5 50 100l ED06042 6 42 100u ED06042SS 6 42 100l ED06055 6 55 100u ED06055SS 6 55 100l ED06075 6 75 100u ED06075SS 6 75 100
PLASTIC PLUGS (FRAME PACKS) Item Code Length (mm) x Drill Size (mm) Colour Pack Qty
WPGR25 25 x 7 Green 1000 WPGR38 38 x 7 Green 500 WPGR50 50 x 7 Green 500
LIGHT DUTY ANCHORING
product guide | commercial construction 39
MECHANICAL ANCHORING
HOLLOW WALL ANCHOR Item Code Thread Size Wall Thickness (mm) Pack Qty
HW05M4 M4 Up to 5 100 HW10M4 M4 6 – 10 100 HW13M4 M4 8 – 13 100 HW24M4 M4 16 - 24 100 HW14M5 M5 7 – 14 100 HW16M6 M6 6 – 16 100
HOLLOW WALL ANCHOR SETTING TOOL Item Code Description Pack Qty
SETHWG Hand Setting Tool - Gun 1
WallMateTM
Item Code Screw Gauge x Wall Thickness (mm) Pack Qty Min. Screw Length (mm)
WMZ 8 x 20 10 – 12 100 WM25 6 - 8 x 20 10 – 12 100
WMZ WM25
l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised * While stocks last
CONCRETE NAILSPart No Description Shank Ø (mm) Overall Length (mm) Order Qty
CF660 Plain 3.8 60 100CF675 Plain 3.8 75 100CW415Q500 Washered 2.4 15 500CW420Q500 Washered 2.4 20 500CW425 Washered 2.4 25 100CW425Q500 Washered 2.4 25 500CW430Q500 Washered 2.4 30 500CW440 Washered 2.4 40 100 CF - Plain Shank
CW - Washered
LIGHT DUTY ANCHORING
40 product guide | commercial construction
product guide | commercial construction 41
chemical anchoring
ramsetreid Chemical Anchors are approved for installation in challenging site conditions such as water immersion, to provide long term reliable service.
The ramsetreid Chemical Range Consists of:
• Epcon C8 Xtrem Seismic Performance Epoxy Anchor
• ChemSet Reo 502 Fast Cure Epoxy Chemical Anchor
• ChemSet Reo 502EF Easy Dispensing Epoxy Chemical Anchor
• ChemSet 801 Xtrem High Productivity Chemical Anchor
• ChemSet 101 Plus General Purpose Polyester Chemical Anchor
• ChemSet Anchor Studs
• Internal Threaded Anchor Inserts
• ChemSet Installation Accessories
CHEMICAL ANCHORING
42 product guide | commercial construction
CHEMICAL ANCHORING
ChemSetTM 101 Plus Styrene Free Polyester Anchoring Adhesive Item Code Description Pack Qty
ISKP ChemSet™ 101 Plus Kit* 10 C101J ChemSet™ 101 Plus Jumbo (750ml) + 2 x Mixer Nozzle 12 C101C ChemSet™ 101 Plus Cartridge (380ml) + 2 x Mixer Nozzle 20 ISNP Mixer Nozzle for ChemSet™ 101 Plus 5* Kit consists of 2 x 380 ml cartridges + 4 x mixer nozzles
UltraFixTM Plus Polyester Anchoring Adhesive (Standard Caulking Gun) Item Code Description Pack Qty
UFP300P UltraFix™ Plus 300 ml 12
ChemSetTM 801 Xtrem™ Heavy Duty Vinyl Ester Anchoring Adhesive Item Code Description Pack Qty
C801C ChemSet™ 801 Xtrem™ Cartridge (380ml) + 2 x Mixer Nozzle 20 C801J ChemSet™ 801 Jumbo (750ml) + 2 x Mixer Nozzle 12 ISNE Mixer Nozzle for ChemSet™ 801 Xtrem™ 5
ChemSetTM Reo502TM Extra Heavy Duty Epoxy Anchoring Adhesive Item Code Description Pack Qty
REO502J600 ChemSet™ Reo502™ (600ml) + Mixer Nozzle 15 REO502EF600 ChemSet™ Reo502EF™ (600ml) + Mixer Nozzle 15 ISNE Mixer nozzles for Reo502™ 5 S055837 Mixer nozzles for Reo502™ Hi Flo 10 S055838 Extension for Hi Flo Nozzle 10
EPCON™ C8 Epoxy Anchoring adhesive Item Code Description Pack Qty
C8-450 EPCON C8 Epoxy (450ml ) with mixer nozzle 12 E108 Applicator tool (450ml ) for EPCON C8 1 ISNE Epoxy mixer nozzle for EPCON C8 5
NOTES:
CHEMICAL ANCHORING
product guide | commercial construction 43
ChemSetTM MaximaTM Anchoring Capsules Item Code Anchor Size (mm) Pack Qty
CHEM10 M10 10 CHEM12 M12 10 CHEM16 M16 10 CHEM2024 M20 & M24 6
ChemSetTM Nylon Sleeves for Hollow Masonry Anchoring with ChemSetTM 101 Plus Item Code Sleeve Length (mm) x To Suit Stud Pack Qty Drill Size (mm)
ISS08 64 x 12 M8 100 ISS10 64 x 14 M10 100 ISS12 64 x 16 M12 100
ChemSetTM Metal Mesh Sieves for Hollow Masonry Anchoring with ChemSetTM 101 Plus Item Code Sleeve Length (mm) x To Suit Stud Pack Qty Drill Size (mm)
ISM12 1000 x 16 M10/M12 1 ISM16 1000 x 22 M16 1
REMEDIAL BRICK WALL TIES (for use with ChemSetTM 101 Plus) Item Code Material Anchor Length (mm) Pack Qty
RA225 Nylon 220 100
ChemSetTM CAPSULES
NOTES:
44 product guide | commercial construction
CHEMICAL ANCHORING
ChemSetTM STUDS
ChemSetTM ANCHOR STUDS Item Code Anchor Size (mm) Anchor Length (mm) x Thread Size Pack Qty
n CS08110GH 8 110 x M8 10u CS08110SS 8 110 x M8 10n CS10130GH 10 130 x M10 10u CS10130SS 10 130 x M10 10l CS12160 12 160 x M12 10n CS12160GH 12 160 x M12 10u CS12160SS 12 160 x M12 10l CS16190 16 190 x M16 10n CS16190GH 16 190 x M16 10u CS16190SS 16 190 x M16 10l CS20260 20 260 x M20 6n CS20260GH 20 260 x M20 6u CS20260SS 20 260 x M20 6l CS24300 24 300 x M24 6n CS24300GH 24 300 x M24 6u CS24300SS 24 300 x M24 6
Threaded Inserts - Internally Threaded Anchors Item Code Anchor Size (mm) Anchor Length (mm) x Thread Size Pack Qty
l 062770 8 60 x M8 10u 062860 8 60 x M8 10l 062480 10 65 x M10 10u 062960 10 65 x M10 10l 062760 12 75 x M12 10u 063100 12 75 x M12 10l 062800 16 125 x M16 10u 051175 16 125 x M16 10l 062810 20 170 x M20 10
NOTES:
l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised
CHEMICAL ANCHORING
product guide | commercial construction 45
ChemSetTM SYSTEMS APPLICATORS Item Code Description Pack Qty
CUAP Chemset™ Universal Applicator* 1 E108 Applicator 450ml Epcon C8 1*For dispensing ChemSet™ 101 Plus, StructaSet™ 401, ChemSet™ 801 and ChemSet™ Reo 502™ Cartridges
ChemSetTM HOLE CLEANING ACCESSORIES Item Code Anchor Size (mm) Description Pack Qty
HCBT13 8 – 12 Brush 1 HCBT20 16 - 20 Brush 1 HCBT26 20 - 24 Brush 1 HCBT201000 16 - 20 1 m long Brush 1 HCBT261000 20 - 26 1 m long Brush 1 HCBT361000 27 - 36 1 m long Brush 1 HCBT421000 37 - 42 1 m long Brush 1 HCPHV - High Volume Dust Blower 1For cleaning dust from holes in concrete
ChemSetTM Anchoring Kit Item Code Description Pack Qty
CHEMKITBAG Tool bag, CUAP, HCPHV,HCBT13,HCBT20,HCBT26 1
APPLICATORS AND ACCESSORIES
NOTES:
ramsetreid Construction Chemicals covers all the essential onsite products to finish off your project. The construction chemical range includes:
• Acrylic and Polyurethane sealants for interior and exterior applications
• Construction adhesives
• Expanding polyurethane foams
• Fire rated foam and sealant
• Epoxy repair mortar and grout.
• Concrete additives for render and remedial work.
construction chemicals
46 product guide | commercial construction
SEALANTS Item Code Colour Pack Size Carton Qty
ROOF SEAL NEUTRAL CURE ROOFING & PLUMBING SILICONE RFSLTRG300 Translucent 300 ml 20 RFSLALG300 Aluminium 300 ml 20
WATER SEAL ACETIC CURE SANITARY SILICONE WRSLWHG300 White 300 ml 20
HiSeal™ POLYURETHANE CONSTRUCTION SEALANT HYSLGYG375 Grey 300 ml 25
GAP SEAL PAINTABLE GAP SEALANT GPSLWHG450 White 300 ml 20
BlazeBrake™ ACRYLIC FIRE RATED SEALANT BLBRGYC Grey 300 ml 20 BLBRGYS Grey 600 ml 15
BARREL GUN, CAULKING GUNS AND ACCESSORIES FOR SEALANTS Item Code Description Pack Qty
CAGU850 Caulking Gun for 850ml / 900 ml Cart. 1 CAGU300 Caulking Gun for 300ml Cart. 1 SABGU37 37cm Barrel Gun for sealant sausages 1 BGUNOZ Nozzle Set Natural for SABGU37 (Pack of 10) 10
POLYETHYLENE CLOSED CELL FOAM BACKER ROD Item Code Colour Diameter (mm) Length (m)
PFROD06 White 6 250 PFROD10 White 10 250 PFROD13 White 13 50 PFROD15 White 15 50 PFROD20 White 20 50 PFROD25 White 25 50 PFROD30 White 30 50 PFROD40 White 40 2 PFROD50 White 50 2
CONSTRUCTION CHEMICALS
CONSTRUCTION CHEMICALS
product guide | commercial construction 47
NailFreeTM Construction Adhesive Item Code Description Pack Size Carton Qty
NFCAG320 300 ml Cartridge 300 ml 10 NFCAG930 900 ml Cartridge 900 ml 10
SAFE-T-BONDTM Water Clean Up Construction Adhesive Item Code Description Pack Size Carton Qty
STBDL1 1 L Sachet 1 Litre 10
RamsetTM FomofillTM Self-Expanding Gap Filling Foam Item Code Description Pack Size Carton Qty
FMFLG500 Fomofill™ 500 ml 12 FMFLG750 Fomofill™ 750 ml 12 FMLN Fomofill™ Nozzles 5 5
FomoPlusTM Applicator Foam Item Code Description Carton Qty
FMPLG750 Fomoplus™ 750 ml Canister 12 FMPLGU Fomoplus™ Applicator Gun 1 FMPLGU300 Fomoplus™ Applicator Gun Metal 1
FomoTM Aerosol Solvent Cleaner for FomoPlusTM Applicators Item Code Description Pack Size Carton Qty
FMSVM500 Fomo™ Solvent 500 ml 12
CONSTRUCTION CHEMICALS
ADHESIVES
FIRE RATED EXPANDING PU FOAM Item Code Size Description Carton Qty
FRF700 750 ml BlazeBrake™ FR Foam 12Consult technical data for tested applications and fire ratings before commencing use. Go to www.ramset.com.au
48 product guide | commercial construction
Epoxy Paste 1210 - Epoxy Repair Compound for Concrete
Item Code Colour Pack Size Carton Qty
EP1210L4 Grey 4 litre 1 EP1210L20 Grey 20 litre 1
Epoxy Grout 7042 - Epoxy Grouting Compound, Standard Cure and Low Exotherm (Deep Pour)
Item Code Colour Pack Size Carton Qty
EP7042L3 Grey Standard 3 litre 1 EP7042L13 Grey Standard 13 litre 1 EP7042LEL3* Grey Deep Pour 3 litre 1 EP7042LEL13* Grey Deep Pour 13 litre 1
CEMENTITIOUS GROUTS Item Code Description Pack Size Qty
RPGMP Premier Grout MP 20kg 1 830104 Ultrafix™ Concremate™ 10kg 1
CONCRETE ADDITIVES Item Code Description Pack Size Qty
CemCrete™ Bonding and Sealing Agent CMCRL5 Cemcrete™ 5 litre 1 CMCRL20 Cemcrete™ 20 litre 1
CONSTRUCTION CHEMICALS
CONCRETE REPAIR
NOTES:
"*Subject to lead time"
product guide | commercial construction 49
Reinforcing products from ramsetreid provide simple solutions for structural concrete connection, reducing both labour and material costs.
Our offer in this category includes:
• Reinforcing continuity system for jump form construction: ReidBar Poly Board ReidBox™ and Rebox™
• ReidBar™ components and their accessories
• ReidBar™ Bracing Solutions
reinforcing solutions
50 product guide | commercial construction
Poly Board Description
Dimensions (mm)
Number of Bar Rows
Max Bar QuantityRebate
DepthWidth Length Bar Size
Threaded Insert
Fitting Increments
90 x 1000 PolyBoard
30 90 1000
RBA12 RB12TI 50 or 100 1 10
RBA16 RBA16TI 50 or 100 1 10
RBA20 RBA20TI 100 1 10
RB25 RB25TI 100 1 10
150 x 1000 PolyBoard
30 150 1000RBA12 RB12TI 50 or 100 1 to 3 19
RBA16 RB16TI 50 or 100 1 to 3 38
180 x 1000 Polyboard
30 180 1000RBA12 RB12TI 50 or 100 1 to 3 19
RBA16 RB16TI 50 or 100 2 to 3 38
ReidBar Poly Board Recommended Configurations
| Reinforcing Solutions ReidBar™ Poly Board
product guide | commercial construction 51
ReidBar™ POLY BOARD CONNECTION SYSTEM
Rebate depths: 30mm, 40mm
Lengths: 900mm, 1000mm, 1100mm, 1200mm
Widths: 90mm, 150mm, 180mm, 200mm, 225mm, 230mm, 250mm, 300mm
Fitting Sizes: 12mm, 16mm, 20mm, 25mm, 32mm
Bar Spacings: At centres nominated by designer Jacking Nuts and Screw Holes
*additional lead time applies
Other Configurations Available Using the Following Sizes*
Length
SpacingWidth
Rebate depth
Key to ReidBar Poly Board Dimensions
ReidBar Poly Board Connection System is the simplest way to place ReidBar™ fittings quickly and accurately, and can be re-used many times in concrete pours. With features such as nail holes, jacking nuts, and chamfered edges, placement and stripping is a breeze. Reid™ Rebate Board Connection System is ideal for applications with plenty of repetitions, such as for typical levels on a jump form construction.
| Reinforcing Solutions ReidBox™
52 product guide | commercial construction
ReidBox™ CONNECTION SYSTEMReidBox™ provides an economical rebate solution using ReidBar™ fittings for in-situ and precast/tilt-up construction, including floor and wall connections. The ReidBox™ system comprises of a plastic rebate former with removable orange plastic lid that seals the ReidBox™ when placed against the formwork, and allows easy access for stripping. The ReidBar™ fittings are secured to the ReidBox™ using ReidBar™ nailing plates, and all components are designed as consumables for single use.
Product Codes
Part Number
Dimensions (mm)Anchorage Type
Bar Size
Bar QuantityMinimum Wall
ThicknessFitting Spacing
Nominal Embedment
16mm: Threaded Insert
RBP100IRBA165150 200 150 148 Headed RBA16 5
RBP100IRBA164200 200 200 148 Headed RBA16 4
16mm: Coupler
RBP100CRBA1604200 Variable 200 Variable Tailbar RBA16 4
20mm: Threaded Insert
RBP100IRBA205150 220 150 178 Headed RBA20 5
RBP100IRBA204200 220 200 178 Headed RBA20 4
25mm: Threaded Insert
RBP100IRB254200 260 200 221 Headed RB25 4
32mm: Threaded Insert
RBP100IRB325150 270 150 240 Headed RB32 5
RBP100IRB324200 270 200 240 Headed RB32 4
Standard Dimensions: Rebate Length: 700mm Rebate Width: 100mm Rebate Depth: 30mm
NOTES:
| Reinforcing Solutions ReBox™
product guide | commercial construction 53
Product Codes
ReBox™ PULL OUT BOX CONNECTION SYSTEMReid™ Rebox™ System is manufactured from pre-bent Grade 500 N TEMPCORE reinforcement bars neatly packed and sealed inside a dimpled galvanised steel rebate box with smooth close-fitting galvanised lid.The Reid™ Rebox™ is easily attached to formwork and/or the reinforcing cage. After the concrete has been poured and the formwork stripped, the design of the Rebox™ allows for easy opening of the unit and access to the reinforcement bars ready for deployment.
Part NumberBar Size
Cog Type
Dimensions (mm)Bar QuantityHorizontal
Bar SpacingVertical Bar Spacing (C2)
Anchorage Length (L2)
Rebate Width (W1)
Rebate Depth (W2)
RBX085LN1205200 N12 L 200 - 200 85 38 5
RBX120UN1205200 N12 U 200 90 - 120 38 5
RBX140UN1205200 N12 U 200 120 - 140 38 5
RBX170UN1205200 N12 U 200 140 - 170 38 5
RBX190UN1205200 N12 U 200 160 - 190 38 5
Standard Dimensions: Rebate Lenght: 1000mm Nominal Concrete Wall Thickness: >150mm Leg Length (L1): 450mm Average Bar Embedment: 130mm
L1L2
L3
W1
W2W2
L1L2
C2
W1
Rebox™ Type
TYPE “U” BOX TYPE “L” BOX
HOW TO SPECIFY E.g RBX140UN1205200
NOTES:
Other configurations available on request and subject to leadtimes
Part Number Description Length (mm) Hex A/F (mm) Pack Size
RB12M16CG 12mm ReidBar to 16mm metric bar coupler Galvanised 90 25 70
RBA16M20CG 16mm ReidBar to 20mm metric bar coupler Galvanised 102 30 50
RBA20M24CG 20mm ReidBar to 24mm metric bar coupler Galvanised 119 38 20
ReidBar to Metric CouplerUtilised to couple ReidBar with metric starter bar.
| Reinforcing Solutions ReidBar™ System
54 product guide | commercial construction
ReidBar™SYSTEM & COMPONENTS
ReidBar™ is a 500N grade reinforcing bar complying with AS/NZS 4671:2001 that can be cut at any point along its length and screwed into the following threaded components.
Part Number Description Length (mm)
RB12SB Starter bar for RB12 fittings 540
RBA16SB Starter bar for RBA16 fittings 660
RBA20SB Starter bar for RBA20 fittings 850
RB25SB Starter bar for RB25 fittings 1150
RB32SB Starter bar for RB32 fittings 1450
ReidBar™ StartersReidBar™ starter bar systems have been developed to provide full strength and positive connections between precast concrete panels, floor slabs and insitu suspended floors.
Part Number DescriptionOuter Diameter (A) (mm)
Length (B) (mm) Hex A/F (mm)Pack Quantity
RB12C ReidBar Coupler for RB12 22 90 25 100
RBA16C ReidBar Coupler for RBA16 30 102 30 60
RBA20C ReidBar Coupler for RBA20 33 129 36 20
RB25C ReidBar Coupler for RB25 43 180 45 20
RB32C ReidBar Coupler for RB32 55 210 57 10
RB12CG* ReidBar Coupler for RB12 (Gal) 22 90 25 100
RBA16CG* ReidBar Coupler for RBA16 (Gal) 30 102 30 60
RBA20CG* ReidBar Coupler for RBA20 (Gal) 33 129 36 20
RB25CG* ReidBar Coupler for RB25 (Gal) 43 180 45 20
RB32CG* ReidBar Coupler for RB32 (Gal) 55 210 57 10
ReidBar™ CouplerSystem to couple two ReidBar™ together. Commonly utilised for wet joints and panel to panel applications.
(A)
(B)
*Lead time applies for Hot Dip Galvanised components
Cut to length available and subject to leadtimes
ReidBar™SYSTEM & COMPONENTS
| Reinforcing Solutions ReidBar™ System
product guide | commercial construction 55
ReidBar™ Inserts
Part Number DescriptionFoot Diameter (A) (mm)
Length (B) (mm)
Cross Hole Diameter (mm)
Pack Quantity
RB12TI ReidBar Insert for RB12 38 100 N/A 75
RBA16TI ReidBar Insert for RBA16 50 118 N/A 30
RBA20TI ReidBar Insert for RBA20 64 148 N/A 20
RB25TI ReidBar Insert for RB25 80 191 N/A 6
RB32TI ReidBar Insert for RB32 101 210 N/A 5
RB12TIG* ReidBar Insert for RB12 (Gal) 38 100 N/A 75
RBA16TIG* ReidBar Insert for RBA16 (Gal) 50 118 N/A 30
RBA20TIG* ReidBar Insert for RBA20 (Gal) 64 148 N/A 20
RB25TIG* ReidBar Insert for RB25 (Gal) 80 191 N/A 6
RB32TIG* ReidBar Insert for RB32 (Gal) 101 210 N/A 5
RB12RI ReidBar Rebate Insert for RB12 39 78 14.5 60
RBA16RI ReidBar Rebate Insert for RBA16 51 96 14.5 30
System to anchor ReidBar™. Commonly utilised for floor to wall or floor to panel connections.
(A)
(B)
*Lead time applies for Hot Dip Galvanised components
ReidBar™ Nut
Part Number Description Length (mm) Hex A/F Hex A/C Pack Quantity
RB12N ReidBar Nut for RB12 40 25 25 50
RBA16N ReidBar Nut for RBA16 45 30 34 50
RBA20N ReidBar Nut for RBA20 45 36 42 50
RB25N ReidBar Nut for RB25 65 46 53 30
RB32N ReidBar Nut for RB32 82 55 63.5 30
RB12NG* ReidBar Nut for RB12 (Gal) 40 25 25 50
RBA16NG* ReidBar Nut for RBA16 (Gal) 45 30 34 50
RBA20NG* ReidBar Nut for RBA20 (Gal) 45 36 42 50
RB25NG* ReidBar Nut for RB25 (Gal) 65 46 53 30
RB32NG* ReidBar Nut for RB32 (Gal) 82 55 63.5 30
System to fix and/or tighten ReidBar™.
*Lead time applies for Hot Dip Galvanised components
NOTES:
| Reinforcing Solutions ReidBar™ System
56 product guide | commercial construction
Part Number Description Dimensions (mm) Pack Quantity
BPLATE20100G* ReidBar Domed Base Plate for RBA16/20 (Gal) 100 x 100 x 6.3 x 14 High 50
RBA20SWG* ReidBar Spherical Washer for RBA16/20 (Gal) 50 OD x 24 ID x thick 100
BPLATE32150G ReidBar Domed Base Plate for RB25/32 (Gal) 150 x 150 x 10 x 24 High 1
RB32SWG ReidBar Spherical Washer for RB25/32 (Gal) 70 OD x 37 ID x 24 thick 50
20FSW ReidBar F/Washer For RBA20 (Gal) 50 x 50 x 3 x 25 hole 1
System for ground anchoring.
ReidBar™ HDG Domed Plates & Spherical Washers*
*While stocks last
NOTES:
| Reinforcing Solutions ReidBar™ Accessories
product guide | commercial construction 57
ReidBar™ ACCESSORIES
ReidBar™ fittings are accompanied by various accessories that made their installation easier.
Part Number
Description SuitsPack Quantity
NP12RB Nailing Plate for RB12 (Orange) RB12TI, RB12C 100
NP16RB Nailing Plate for RBA16 (Orange) RBA16TI, RBA16C 100
NP20RB Nailing Plate for RBA20 (Orange) RBA20TI, RBA20C 100
NP25RB Nailing Plate for RB25 (Orange) RB25TI, RB25C 100
NP32RB Nailing Plate for RB32 (Orange) RB32TI, RB32C 100
ReidBar™ Nail PlatesMainly for attaching ReidBar™ Inserts and Couplers to timber formwork.
Part Number Description SuitsPack Quantity
ANTCAPRB12 Antenna Cap for RB12 (Orange) RB12TI, RB12C 100
ANTCAPRB16 Antenna Cap for RBA16 (Orange) RBA16TI, RBA16C 100
ReidBar™ Antenna Cap* Prevents concrete slurry entering and fouling ReidBar™ Insert and Coupler threads.
Part Number Description SuitsPack Quantity
RBA16CAP ReidBar Sealing Cap for RBA16 RBA16TI, RBA16C 100
RBA20CAP ReidBar Sealing Cap for RBA20 RBA20TI, RBA20C 100
RB25CAP ReidBar Sealing Cap for RB25 RB25TI, RB25C 100
RB32CAP ReidBar Sealing Cap for RB32 RB32CTI, RB32C 100
ReidBar™ Sealing Cap* Provides protection for internal threads of ReidBar™ Inserts and couplers.
*While stocks last
NOTES:
*While stocks last
| Formwork and Bracing Systems ReidBar™ Formwork System
58 product guide | commercial construction
ReidBar™ FORMWORK SYSTEMReidBar™ is ductile and can accept tensile loads and shear loads. This makes it an ideal anchoring and formworking system for jump form construction.
Product Codes
Part Number
Description SuitsPack Quantity
FWCOND20 PVC Conduit 20mm ID x 3m RBA16 75
FWCOND25 PVC Conduit 27mm ID x 3m RBA20 75
FWCC20 Conduit Cone Small 20mm (for RBA16) RVT20 / RBA16 500
FWCC25 Conduit Cone Small 25mm (for RBA20) RVT20 / RBA20 500
RPLATE ReidBar Plate 150x100x6 RBA16, RBA20 15
RBA16WN ReidBar Wing Nut for RBA16 RBA16 30
Typical ReidBar™ formwork system.
PVC Conduit & Conduit Cone
R Plate
Form Work System
FWCC__
ReidBar™ Wing Nut
Part Number Description Hex A/F Height (mm)Overall Diameter (mm)
Pack Quantity
RB12WN ReidBar Wing Nut for RB12 22 40 58 100
RBA16WN ReidBar Wing Nut for RBA16 30 51 98 30
System to fix and/or tighten ReidBar™. Commonly utilised for formwork systems.
ReidBar™ Wing Nut
(FWCOND__)
Bar Size Finish Kit Code
12mm Galvanised RBRACE12-SET
16mm Galvanised RBRACE16-SET
20mm Galvanised RBRACE20-SET(A)
25mm Galvanised RBRACE25-SET
32mm Galvanised RBRACE32-SET
| Formwork and Bracing Systems ReidBrace™
product guide | commercial construction 59
ReidBrace™ ENGINEERED BRACE SYSTEM ReidBrace™ is an off-the-shelf system that provides design engineers and constructors with an economic solution for tension bracing of structures, tie-back applications and temporary works bracing. ReidBrace™ utilises ReidBar™, a user friendly continuously threaded reinforcing bar system, as tension members. This makes ReidBrace™ a unique system that is easy to install with minimum extra processes onsite.
ReidBrace™ Boxed Sets*
NOTES:
RBRACE end
Tension Spring
Half Nut
Full Nut
RBRACE
*Boxed Sets available early 2018. For sales of individual components please contact ramsetreid.
Boxed Set contents:
1. Reid Tension Spring
2. Reid Tab Washer
3. RBRACE Banana End
4. RBRACE-END
5. Half Nut & Full Nut
1
2
3
4
5
| RapidBrace Overview
installation guide | rapidbrace 3
Product Code Description Product Image Key
RVT20 Reid Void Tube 3m Length 1
RAPIDB RapidBrace Tripod and Spacer Disc 2a and 2b
RAPIDWN RapidBrace Wing Nut RB12 3
RAPIDF RapidBrace Foot For RB12 4
RB12N RB12 Nut 5
RB12SB RB12 ReidBar Starter Bar 6
LIFEGUARD 12-20 Life Guard Protective Cap 7
RapidBraceRapidBrace is a cast in solution primarily designed for fixing brace feet bracket of concrete wall panel braces in low strength concrete.The internally threaded Rapid Foot is cast into the floor along with the void tube, designed to accept RB12 ReidBar “bolt” to secure the brace feet bracket.
Features:• Safe, flexible and quick
cast In solution
• Full bar break connectionin low strength concrete
• Reduce floor cycle times
• Fully tested to AS 3850:2015
• Use for bracing, handrailsand safety screens.
Rapid Brace Components
2a
2b
1
3
46 5
7
| Formwork and Bracing Systems RapidBrace
60 product guide | commercial construction
| RapidBrace Overview
installation guide | rapidbrace 3
Product Code Description Product Image Key
RVT20 Reid Void Tube 3m Length 1
RAPIDB RapidBrace Tripod and Spacer Disc 2a and 2b
RAPIDWN RapidBrace Wing Nut RB12 3
RAPIDF RapidBrace Foot For RB12 4
RB12N RB12 Nut 5
RB12SB RB12 ReidBar Starter Bar 6
LIFEGUARD 12-20 Life Guard Protective Cap 7
RapidBraceRapidBrace is a cast in solution primarily designed for fixing brace feet bracket of concrete wall panel braces in low strength concrete.The internally threaded Rapid Foot is cast into the floor along with the void tube, designed to accept RB12 ReidBar “bolt” to secure the brace feet bracket.
Features:• Safe, flexible and quick
cast In solution
• Full bar break connectionin low strength concrete
• Reduce floor cycle times
• Fully tested to AS 3850:2015
• Use for bracing, handrailsand safety screens.
Rapid Brace Components
2a
2b
1
3
46 5
7
| Cast-in Metric Connection Systems Ferrules
Ferrules - Elephant Feet
product guide | commercial construction 61
Item CodeThread Size x Thread Length (mm)
Ferrule Length (mm) Pack Qty
FE10045 M10 x 20 45 250
FE12055 M12 x 25 55 200
FE12055GH M12 x 25 55 200
FE12095 M12 x 25 95 100
FE12095GH M12 x 25 95 100
FE16070 M16 x 32 70 100
FE16070GH M16 x 32 70 100
FE16095 M16 x 32 95 75
FE16095GH M16 x 32 95 75
FE20070 M20 x 32 70 75
FE20070GH M20 x 32 70 75
FE20095 M20 x 38 95 50
FE20095GH M20 x 38 95 50
FE24095 M24 x 50 95 40
FE24095GH M24 x 50 95 40
Ferrules - Stainless SteelFE10045SS M10 x 20 45 250
FE12055SS M12 x 25 55 200
FE16070SS M16 x 32 70 100
FE20095SS M20 x 45 95 50
Ferrules - Round (Stiletto)FS16070 M16 x 32 70 50
FS16070GH M16 x 32 70 50
FS16095 M16 x 39 95 50
FS16095GH M16 x 39 95 50
FS20070 M20 x 32 70 50
FS20070GH M20 x 32 70 50
FS20095 M20 x 39 95 50
FS20095GH M20 x 39 95 50
AccessoriesItem Code Description Thread Size Pack Qty
FM12N Nailing Plate - RED M12 100
FM16N Nailing Plate - GREEN M16 100
FM20N Nailing Plate - BLUE M20 100
FM24N Nailing Plate - YELLOW M24 100
FWSC125 Support Chair - 125mm 50
FWSC150 Support Chair - 150mm 50
FWSC175 Support Chair - 175mm 50
FWSC200 Support Chair - 200mm 50
FSC25 Stiletto Ferrule Chair - 25mm 50
FSC50 Stiletto Ferrule Chair - 50mm 50
FSC75 Stiletto Ferrule Chair - 75mm 50
FSC100 Stiletto Ferrule Chair -100mm 50
Part Number Description Finish Matching Ferrule
Fixture Thickness
Pack Quantity
ORB2016BGH OrbiPlate™ M16 Hot Dip Gal FE16095GH 6 – 12 mm 20
ORB2020BGH OrbiPlate™ M20 Hot Dip Gal FE20095GH 6 – 16 mm 20
| Cast-in Metric Connection Systems OrbiPlate™
OrbiPlate™OrbiPlate™ overcomes the major headache that comes with bolted cast-in connections, getting the holes to line up! The methods traditionally used to overcome this were time consuming, costly and often structurally inadequate.The patented OrbiPlate system is used when connecting steel to steel or steel to concrete elements and delivers connection tolerances of up to 20mm around the centre of the connection. It also provides the ability to achieve fine locational accuracy when positioning each steel member.
OrbiPlate is quick and easy to install. The steel member is supplied to site with a pre-formed hole (70mm), which can be punched or cut at the centre of the connection location. The main washer is then placed over the hole, rotated to locate the slot over the ferrule, then secured using the class 8.8 bolt through the small washer. The bolt can be positioned anywhere along the elongated slot, providing up to 20mm tolerance in all directions.
Features & Benefits• Utilises readily available Reid™
Elephant Foot™ ferrules for steel to concrete connections.
• OrbiPlate is made from high tensile steel.
• Hot Dip Galvanised finishes.
• It is comprising of two washers (one large and one small) and is supplied with a M20 class 8.8 bolt.
• Capacity is limited to either the ferrule cast into the concrete or the class 8.8 bolt*.
Advantages• No lost time.
• No hot work, either blowing out holes or welding.
• No call outs when connections don’t line up.
• OrbiPlate locks in place.
• Fine positional adjustment allows accurate positioning of each steel member.
• OrbiPlate provides a high capacity structural connection*.
*Refer to the OrbiPlate Engineer’s Design Guide for design capacities for both steel to concrete & steel to steel applications.
Product CodesOrbiPlate fits into a pre-formed hole in steel component (diameter 70mm ± 1mm)
Provides ± 20mm positional tolerance. No rework or
call outs when connections don’t line up.
62 product guide | commercial construction
Part Number
DescriptionPack Quantity
Compatible Lifting Anchors
3DX85LC SwiftLift™ 3Dx 8.5 tonne Lifting Clutch 13DX85, SJS, FL050 Series
SJLLC SwiftLift™ Jaws 3 tonne Lifting Clutch 1 SJL
SJULC SwiftLift™ Jaws 10 tonne Lifting Clutch 1 SJU
Edge Lift Clutches
| Concrete Lifting Accessories SwiftLift™
product guide | commercial construction 63
Swift™ Shim 150mm x 100mm
For full details of the Reid SwiftLift Concrete lifting Systems including lifting anchors, bond breakers etc, Consult ramsetreid Pre-cast, Tilt-up and Structural Steel Publications.
Part Number Description Pack Quantity
SHIM01 1mm 100
SHIM02 2mm 200
SHIM03 3mm 100
SHIM05 5mm 100
SHIM10 10mm 40
SHIM15 15mm 40
SHIM20 20mm 30
AccessoriesPart Number
DescriptionPack Qty
Replaces
RBH Rambar Leverage Tool 1
DSR16 Dowelsert to suit 16 diam Round Bar 25
DSR20 Dowelsert to suit 20 diam Round Bar 25
FILLET12 Panel Fillet (12mm x 12mm) - 3 metre length 75m RPF
FILLET17 Form Fillet (17mm x 17mm) - 3 metre length 75m RFF
MOCK12 Panel False Joint (40mm x 12mm) - 3 metre length 30m RPFJ
MOCK17 Form False Joint (50mm x 17mm) - 3 metre length 30m RFFJ
PFC Fillet Shear 1
100mm x 75mm Half Shims also Available
Part Number
WLL Pack Quantity
1LE 1.3t 1
2LE 2.5t 1
5LE 5.0t 1
10LE 10.0t 1
20LE 20.0t 1
32LE 32.0t 1
SwiftLift™ Clutches for SwiftLift™ Headed Anchor Range
Ramset™ AustraliaSales, Orders and EnquiriesTel: 1300 780 063Fax: 1300 780 064Email: [email protected]: www.ramset.com.au
australian trade centres Victoria5/71 Victoria Crescent, Abbotsford 3067
1 Ramset Drive, Chirnside Park 3116
South Australia115 Sir Donald Bradman Drive, Hilton 5033
New South Wales71 Carnarvon Street, Silverwater 2128
563 Gardeners Road, Mascot 2020
3/8 Channel Road, Mayfield West 2304
ACT5/19 Tennant Street, Fyshwick 2609
Queensland53 Doggett Street, Newstead 4006
Western Australia525 Abernethy Road, Kewdale 6105
ramsetreid™ 1 Ramset Drive, Chirnside Park 3116 Information in this documents is correct at the time of printing. Readers should contact ramsetreid™ or consult ramsetreid™ detailed technical information to ensure product is suitable for intended use prior to purchase. ITW Australia Pty Ltd ABN 63 004 235 063 trading as ramsetreid™© copyright 2017. ™ Trademarks of Cetram Pty. Ltd. Used under license by ramsetreid™
Reid™ Australia Customer Service CentreTel: 1300 780 250 Email: [email protected]: www.reid.com.au
Danley™ Australia Tel: 1300 DANLEY (1300 326 539) Email: [email protected]: www.danley.com.au
customer service
Top Related